Analytical techniques used to study the degradation of proteins and peptides: chemical instability

LC-MS/MS quantification of bacterial and fungal signal peptides via direct injection: a case study of cross-kingdom communication

Bacteria and yeast use secreted signal peptides, also known as pheromones, for cell-cell communication within their respective species. Recently, genetic modification has allowed for the extension and exploitation of this type of communication, to communication between organisms from different species and even from different kingdoms. This innovative approach is intended to allow for the large-scale production of specific compounds for applications in medicine and biotechnology while producing reduced amounts of by-products. Until now, the detection of signal peptides, which are often short-lived and only present in small amounts, is usually qualitative, non-selective, and time-consuming and/or requires the presence of additional cell types. Here, an ESI-LC-MS/MS method for the specific quantification of signal peptides from yeast (α- and P-factor) and bacteria (CSF) using a TSKgel column operating under HILIC conditions has been demonstrated. The influence of different matrices, their adsorption behavior, and their stability were investigated. In matrix, LOQs of 0.05 µM, 0.03 µM, and 0.02 µM were obtained for CSF, α-factor, and P-factor, respectively. Subsequently, the developed method was applied to the detection of yeast- and bacteria-specific peptides secreted by genetically modified yeasts. It could be demonstrated that under overexpressing conditions, α-factor and P-factor concentrations of 1 µM were measured, while for CSF concentrations as high as 2.5 µM was reached. Finally, the established method permits the simultaneous, quantitative detection of signal peptides in different matrices and without pre-concentration in near-real time, thus advancing the possibility of tracking cross-kingdom communication.

Role of Copper and Zinc Ions in the Hydrolytic Degradation of Neurodegeneration-Related Peptides

Spontaneous cleavage reactions normally occur in vivo on amino acid peptide backbones, leading to fragmentation products that can have different physiological roles and toxicity, particularly when the substrate of the hydrolytic processes are neuronal peptides and proteins highly related to neurodegeneration. We report a hydrolytic study performed with the HPLC-MS technique at different temperatures (4 °C and 37 °C) on peptide fragments of different neuronal proteins (amyloid-β, tau, and α-synuclein) in physiological conditions in the presence of Cu2+ and Zn2+ ions, two metal ions found at millimolar concentrations in amyloid plaques. The coordination of these metal ions with these peptides significantly protects their backbones toward hydrolytic degradation, preserving the entire sequences over two weeks in solution, while the free peptides in the same buffer are fully fragmented after the same or even shorter incubation period. Our data show that peptide cleavage is not only ruled by the chemical sensitivity of amino acids, but the peptide conformation changes induced by metal coordination influence hydrolytic reactions. The enhanced stability of neuronal peptides provided by metal coordination can increase local levels of amyloidogenic species capable of seeding fibril growth, resulting in aberrant protein depositions and deficits in neuronal activity.

Stability Studies of the Dilution Series of Different Antibiotic Stock Solutions in Culture Medium Incubated at 37 °C

The long-term stability of antibiotics in culture media remains underexplored in scientific literature. This study evaluated the stability of eight distinct antibiotic stock solutions-amoxicillin, cefotaxime, neomycin, oxytetracycline, florfenicol, enrofloxacin, colistin, and potentiated sulfonamide-and their 10-fold dilution series in tryptone soy broth (TSB) at 37 °C, over 12 days. Samples were collected immediately after preparation and on days 1, 2, 5, 7, 9, and 12, with active substance concentrations measured using ultra-high-performance liquid chromatography (UHPLC) coupled with mass spectrometry. The results indicated that among the ultrapure water stock solutions, neomycin, florfenicol, and potentiated sulfonamide maintained stability (>95%). Within the culture medium, florfenicol showed consistent stability (100%) throughout the study, potentiated sulfonamide experienced minor degradation (>85%), and neomycin underwent significant degradation. Amoxicillin, oxytetracycline, and colistin displayed considerable degradation in both solution types but were more stable in ultrapure water solutions. The stability of cefotaxime and enrofloxacin in ultrapure water solutions and in the medium was very similar when compared; however, 3.6% of the former and 88.7% of the latter remained detectable by day 12. These findings are crucial for minimum inhibitory concentration (MIC) assessments, especially in minimum bactericidal concentration (MBC) studies, and in experiments concerning long-term evolution and co-selection. This study underscores the necessity of stability assessments in culture media to validate future experimental outcomes.

Chemometrics in Protein Formulation: Stability Governed by Repulsion and Protein Unfolding

Therapeutic proteins can be challenging to develop due to their complexity and the requirement of an acceptable formulation to ensure patient safety and efficacy. To date, there is no universal formulation development strategy that can identify optimal formulation conditions for all types of proteins in a fast and reliable manner. In this work, high-throughput characterization, employing a toolbox of five techniques, was performed on 14 structurally different proteins formulated in 6 different buffer conditions and in the presence of 4 different excipients. Multivariate data analysis and chemometrics were used to analyze the data in an unbiased way. First, observed changes in stability were primarily determined by the individual protein. Second, pH and ionic strength are the two most important factors determining the physical stability of proteins, where there exists a significant statistical interaction between protein and pH/ionic strength. Additionally, we developed prediction methods by partial least-squares regression. Colloidal stability indicators are important for prediction of real-time stability, while conformational stability indicators are important for prediction of stability under accelerated stress conditions at 40 °C. In order to predict real-time storage stability, protein-protein repulsion and the initial monomer fraction are the most important properties to monitor.

Development of a HPLC fluorometric method for the quantification of enfuvirtide following in vitro releasing studies on thermosensitive in situ forming gel

Due to the presence of peptidase and protease in the gastrointestinal tract, peptides are subjected to digestion and inactivation when administrated orally. To avoid degradation and maintain the desired efficacy of peptide drugs, there is a demand to develop transdermal and intradermal delivery systems. This requires efficient and specific analytical methods to separate and quantify the peptide drugs from the formulation and the skin matrix in the early stages of pharmaceutical development. A high-performance liquid chromatography (HPLC) system equipped with a fluorometric detector was used to quantify enfuvirtide, which is the first fusion inhibitor for HIV treatment. The HPLC method was developed and validated according to the ICH Q2(R1) guidelines. The viability of the method was demonstrated during in vitro studies, where samples were analysed following intradermal administration of a thermosensitive in situ forming gel. Compared with previously reported methods, this assay proved efficient, sensitive and accurate, with a detection limit of 0.74 μg/mL and a run time of 9 min, mitigating the use of any internal standards and detergents. The addition of an organic solvent to the samples successfully solved the problem of low recovery caused by the adsorption of the drug to the plastic consumables in the sample treatment process. The amount of enfuvirtide releasing from the in situ gel through skin after 7 hours was 16.25 ± 7.08 μg, which was significantly lower than the reconstituted FUZEON^® itself (26.68 ± 10.45 μg), showing a longer release profile. The results may be beneficial as a constructive input for future enfuvirtide quantification within a preclinical setting through in vitro release studies across the skin.

Studying Peptide-Metal Ion Complex Structures by Solution-State NMR

Metal chelation can provide structural stability and form reactive centers in metalloproteins. Approximately one third of known protein structures are metalloproteins, and metal binding, or the lack thereof, is often implicated in disease, making it necessary to be able to study these systems in detail. Peptide-metal complexes are both present in nature and can provide a means to focus on the binding region of a protein and control experimental variables to a high degree. Structural studies of peptide complexes with metal ions by nuclear magnetic resonance (NMR) were surveyed for all the essential metal complexes and many non-essential metal complexes. The various methods used to study each metal ion are presented together with examples of recent research. Many of these metal systems have been individually reviewed and this current overview of NMR studies of metallopeptide complexes aims to provide a basis for inspiration from structural studies and methodology applied in the field.

Comprehensive Review on the Degradation Chemistry and Toxicity Studies of Functional Materials

In recent decades there has been growing interest of material chemists in the successful development of functional materials for drug delivery, tissue engineering, imaging, diagnosis, theranostic, and other biomedical applications with advanced nanotechnology tools. The efficacy and safety of functional materials are determined by their pharmacological, toxicological, and immunogenic effects. It is essential to consider all degradation pathways of functional materials and to assess plausible intermediates and final products for quality control. This review provides a brief insight into chemical degradation mechanisms of functional materials like oxidation, photodegradation, and physical and enzymatic degradation. The intermediates and products of degradation were confirmed with analytical methods such as proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), UV-vis spectroscopy (UV-vis), infrared spectroscopy (IR), differential scanning calorimetry (DSC), mass spectroscopy, and other sophisticated analytical methods. These analytical methods are also used for regulatory, quality control, and stability purposes in industry. The assessment of degradation is important to predetermine the behavior of functional materials in specific storage conditions and can be relevant to their behavior during in vivo applications. Another important aspect is the evaluation of the toxicity of functional materials. Toxicity can be accessed with various methods using in vitro, in vivo, ex vivo, and in silico models. In vitro cell culture methods are used to determine mitochondrial damage, reactive oxygen species, stress responses, and cellular toxicity. In vitro cellular toxicity can be measured by MTT assay, LDH leakage assay, and hemolysis. In vivo studies are performed using various animal models involving zebrafish, rodents (mice and rats), and nonhuman primates. Ex vivo studies are also used for efficacy and toxicity determinations of functional materials like ex vivo potency assay and precision-cut liver slice (PCLS) models. The in silico tools with computational simulations like quantitative structure-activity relationships (QSAR), pharmacokinetics (PK) and pharmacodynamics (PD), dose and time response, and quantitative cationic-activity relationships ((Q)CARs) are used for prediction of the toxicity of functional materials. In this review, we studied the principle methods used for degradation studies, different degradation pathways, and mechanisms of functional material degradation with prototype examples. We discuss toxicity assessments with different toxicity approaches used for estimation of the safety and efficacy of functional materials.

The Impact of Glycerol on an Affibody Conformation and Its Correlation to Chemical Degradation

The addition of glycerol to protein solutions is often used to hinder the aggregation and denaturation of proteins. However, it is not a generalised practice against chemical degradation reactions. The chemical degradation of proteins, such as deamidation and isomerisation, is an important deteriorative mechanism that leads to a loss of functionality of pharmaceutical proteins. Here, the influence of glycerol on the chemical degradation of a protein and its correlation to glycerol-induced conformational changes is presented. The time-dependent chemical degradation of a pharmaceutical protein, GA-Z, in the absence and presence of glycerol was investigated in a stability study. The effect of glycerol on protein conformation and oligomerisation was characterised using asymmetric field-flow fractionation and small-angle neutron scattering in a wide glycerol concentration range of 0–90% v/v. The results from the stability study were connected to the observed glycerol-induced conformational changes in the protein. A correlation between protein conformation and the protective effect of glycerol against the degradation reactions deamidation, isomerisation, and hydrolysis was found. The study reveals that glycerol induces conformational changes of the protein, which favour a more compact and chemically stable state. It is also shown that the conformation can be changed by other system properties, e.g., protein concentration, leading to increased chemical stability.

Photostability of l-tryptophan in aqueous solution: Effect of atmosphere and antioxidants addition

l-Tryptophan (l-Trp) is an amino acid important in nutrition, and mainly provided by food supplements. However, it is known to be unstable under light irradiation, which is an issue for the nutrition and feed industry. In the present study, the photostability of l-Trp was studied in acidic aqueous solutions under air and under an inert atmosphere, N₂. The photodegradation was followed using UV-visible and fluorescence spectroscopy after photolysis. Moreover, molecular orbitals and bond dissociation energies calculations, and electron spin resonance spectroscopy were performed. From all these results, a photodegradation occurring through a free radical pathway was suggested. Interestingly, several antioxidants were tested to improve the photostability of l-Trp, especially during irradiation under air, since the l-Trp was evidenced to be much less stable under air than under N₂. The results showed that sodium benzoate or EDTA were not efficient, but antioxidants such as chlorogenic acid, ascorbic acid or potassium sorbate improved significantly the photostability of l-Trp in acidic solutions.

2D and 3D inkjet printing of biopharmaceuticals - A review of trends and future perspectives in research and manufacturing

There is an ongoing global shift in pharmaceutical business models from small molecule drugs to biologics. This increase in complexity is in response to advancements in our diagnoses and understanding of diseases. With the more targeted approach coupled with its inherently more costly development and manufacturing, 2D and 3D printing are being explored as suitable techniques to deliver more personalised and affordable routes to drug discovery and manufacturing. In this review, we explore first the business context underlying this shift to biopharmaceuticals and provide an update on the latest work exploring discovery and pharmaceutics. We then draw on multiple disciplines to help reveal the shared challenges facing researchers and firms aiming to develop biopharmaceuticals, specifically when using the most commonly explored manufacturing routes of drop-on-demand inkjet printing and pneumatic extrusion. This includes separating out how to consider mechanical and chemical influences during manufacturing, the role of the chosen hardware and the challenges of aqueous formulation based on similar challenges being faced by the printing industry. Together, this provides a review of existing work and guidance for researchers and industry to help with the de-risking and rapid development of future biopharmaceutical products.

Identification of ex vivo catabolites of peptides with doping potential in equine plasma by HILIC-HRMS

Bioactive peptides pose a great threat to sports integrity. The detection of these peptides is essential for enforcing their prohibition in sports. Identifying the catabolites of these peptides that are formed ex vivo in plasma may improve their detection. In the present study, the stability of 27 bioactive peptides with protection at both termini in equine plasma was examined under different incubation conditions, using HILIC coupled to HRMS. Of the 27 peptides, 13 were stable after incubation at 37°C for 72 hr, but the remaining 14 were less stable. Ex vivo catabolites of these 14 peptides were detected using their theoretical masses generated in silico, their appearance was monitored over the time course of incubation, and their identity was verified by their product ion spectra. Catabolites identified for chemotactic peptide, DALDA, dmtDALDA, deltorphins I and II, Hyp⁶ -dermorphin, Lys⁷ -dermorphin, and dermorphin analog are novel. A d-amino acid residue at position 2 or 1 of a peptide or next to its C-terminus protected the relevant terminal from degradation by exopeptidases, but such a residue at position 3 did not. A pGlu residue or N-methylation at the N-terminus of a peptide did not protect its N-terminal. Ethylamide at the C-terminus of a peptide provided the C-terminal protection from attacks by carboxypeptidases. The C-terminal Lys amide in DALDA, dmtDALDA, and Lys⁷ -dermorphin was susceptible to cleavage by plasma enzymes, which is the first report, to the authors' knowledge. The results from the present study provide insights into the stability of peptides in plasma.

In Silico and in Vitro Evaluation of Deamidation Effects on the Stability of the Fusion Toxin DAB389IL-2

Background:

DAB389IL-2 (Denileukin diftitox) as an immunotoxin is a targeted pharmaceutical protein and is the first immunotoxin approved by FDA. It is used for the treatment of various kinds of cancer such as CTCL lymphoma, melanoma, and Leukemia but among all of these, treatment of CTCL has special importance. DAB389IL-2 consists of two distinct parts; the catalytic domain of Diphtheria Toxin (DT) that genetically fused to the whole IL-2. Deamidation is the most important reaction for chemical instability of proteins occurs during manufacture and storage. Deamidation of asparagine residues occurs at a higher rate than glutamine residues. The structure of proteins, temperature and pH are the most important factors that influence the rate of deamidation.

Methods:

Since there is not any information about deamidation of DAB389IL-2, we studied in silico deamidation by Molecular Dynamic (MD) simulations using GROMACS software. The 3D model of fusion protein DAB389IL-2 was used as a template for deamidation. Then, the stability of deamidated and native form of the drug was calculated.

Results:

The results of MD simulations were showed that the deamidated form of DAB389IL-2 is more unstable than the normal form. Also, deamidation was carried by incubating DAB389IL-2, 0.3 mg/ml in ammonium hydrogen carbonate for 24 h at 37o C in order to in vitro experiment.

Conclusion:

The results of in vitro experiment were confirmed outcomes of in silico study. In silico and in vitro experiments were demonstrated that DAB389IL-2 is unstable in deamidated form.

Test models for the evaluation of immunogenicity of protein aggregates

Protein aggregates have been discussed for a long time as a potential risk factor for immunogenicity in patients. Meanwhile, many research groups have investigated the immunogenicity of differently produced aggregates using in vitro or in vivo models. Despite all knowledge gained in these studies still little is known about the mechanisms of immunogenicity and the kind of protein aggregates bearing the greatest risk for immunogenicity. The choice of a suitable test model regarding the predictability of immunogenicity of protein aggregates in humans plays a major role and influences results and conclusions substantially. In this review we will provide an overview of the test models recently used for the evaluation of immunogenicity of protein aggregates; we will discuss advantages and drawbacks regarding their usability and predictive power for immunogenicity in humans.

Impact of Tryptophan Oxidation in Complementarity-Determining Regions of Two Monoclonal Antibodies on Structure-Function Characterized by Hydrogen-Deuterium Exchange Mass Spectrometry and Surface Plasmon Resonance

Purpose

Tryptophan’s (Trp) unique hydrophobic and structural properties make it an important antigen binding motif when positioned in complementarity-determining regions (CDRs) of monoclonal antibodies (mAbs). Oxidation of Trp residues within the CDR can deleteriously impact antigen binding, particularly if the CDR conformation is altered. The goal of this study was to evaluate the conformational and functional impact of Trp oxidation for two mAb subtypes, which is essential in determining the structure-function relationship and establishing appropriate analytical control strategies during protein therapeutics development.

Methods

Selective Trp oxidation was induced by 2,2′-Azobis(2-amidinopropane) dihydrochloride (AAPH) treatment in the presence of free methionine (Met). The native and chemically oxidized mAbs were characterized by hydrogen-deuterium exchange mass spectrometry (HDX-MS) for conformational changes and surface plasmon resonance (SPR) for antigen-antibody binding.

Results

Treatment of mAbs with AAPH selectively oxidized solvent accessible Trp residues. Oxidation of Trp within or in proximity of CDRs increased conformational flexibility in variable domains and disrupted antigen binding.

Conclusions

Trp oxidation in CDRs can adversely impact mAbs’ conformation and antigen binding. Trp oxidation should be carefully evaluated as part of critical quality attribute assessments. Oxidation susceptible Trp should be closely monitored during process development for mAbs to establish appropriate analytical control for manufacturing of drug substance and drug product.

Electronic supplementary material

The online version of this article (10.1007/s11095-018-2545-8) contains supplementary material, which is available to authorized users.

Peptide-based therapeutics: quality specifications, regulatory considerations, and prospects

Exquisite selectivity, remarkable efficacy, and minimal toxicity are key attributes inherently assigned to peptides, resulting in increased research interest from the pharmaceutical industry in peptide-based therapeutics (PbTs). Pharmacopoeias develop authoritative standards for PbT by providing standard specifications and test methods. Nevertheless, a lack of harmonization in test procedures adopted for PbT in the latest editions of Pharmacopoeias has been observed. Adoption of a harmonized monograph could increase further the interest of the global pharmaceutical industry in PbTs. Here, we provide an overview of pharmacopoeial methodologies and specifications commonly observed in PbT monographs and highlight the main differences among the pharmacopoeias in terms of the active pharmaceutical ingredients that they focus on. We also address the prospects for PbTs to mature as a new therapeutic niche.

High-throughput screening of antibody variants for chemical stability: identification of deamidation-resistant mutants

Developability assessment of therapeutic antibody candidates assists drug discovery by enabling early identification of undesirable instabilities. Rapid chemical stability screening of antibody variants can accelerate the identification of potential solutions. We describe here the development of a high-throughput assay to characterize asparagine deamidation. We applied the assay to identify a mutation that unexpectedly stabilizes a critical asparagine. Ninety antibody variants were incubated under thermal stress in order to induce deamidation and screened for both affinity and total binding capacity. Surprisingly, a mutation five residues downstream from the unstable asparagine greatly reduced deamidation. Detailed assessment by LC-MS analysis confirmed the predicted improvement. This work describes both a high-throughput method for antibody stability screening during the early stages of antibody discovery and highlights the value of broad searches of antibody sequence space.

A LC-MS/MS method to monitor the concentration of HYD-PEP06, a RGD-modified Endostar mimetic peptide in rat blood

HYD-PEP06 is a novel RGD-modified Endostar mimetic peptide with 30 amino acids that is intended to suppress the formation of neoplasm vessels. This assay was developed and validated to monitor the level of the peptide HYD-PEP06 in rat blood, using liquid chromatography tandem mass spectrometry (LC-MS/MS). HYD-PEP10, another peptide similar to the analyte, was used as an internal standard (IS). A triple quadrupole mass spectrometry in Multiple Reaction Monitoring (MRM) mode and an electrospray interface (ESI) in the positive mode were used for MS analysis. The analysis was optimized with addition of 0.3% formic acid (FA) into the mobile phase as well as with a needle washing solution to overcome the carryover effect. In addition, the carryover was reduced by optimizing the mobile phase gradient. Methanol was used as a diluent of working solutions to avoid any adsorption. Methanol:acetonitrile (1:1, v:v) containing 0.3% FA was employed to precipitate the blood samples. Unknown blood samples must be placed in ice bath immediately, and precipitating agents should be added within 30 min to ensure the stability of blood samples. The assay was established and validated. This method showed a good linear relationship for the HYD-PEP06 in the range of 10 ng·mL^-1 to 2000 ng·mL^-1, with R > 0.99. HYD-PEP06 was determined with accuracy values (RE%) of -5.06%-8.54%, intra- and inter-day precisions (RSD%) of 3.13%-4.87% and 4.81%-9.42%. The method was successfully in monitoring the concentration of HYD-PEP06 in rat blood.

Forced degradation of recombinant monoclonal antibodies: A practical guide

Forced degradation studies have become integral to the development of recombinant monoclonal antibody therapeutics by serving a variety of objectives from early stage manufacturability evaluation to supporting comparability assessments both pre- and post- marketing approval. This review summarizes the regulatory guidance scattered throughout different documents to highlight the expectations from various agencies such as the Food and Drug Administration and European Medicines Agency. The various purposes for forced degradation studies, commonly used conditions and the major degradation pathways under each condition are also discussed.

Citropin 1.1 Trifluoroacetate to Chloride Counter-Ion Exchange in HCl-Saturated Organic Solutions: An Alternative Approach

In view of the increasing interest in peptides in various market sectors, a stronger emphasis on topics related to their production has been seen. Fmoc-based solid phase peptide synthesis, although being fast and efficient, provides final products with significant amounts of trifluoroacetate ions in the form of either a counter-ion or an unbound impurity. Because of the proven toxicity towards cells and peptide activity inhibition, ion exchange to more biocompatible one is purposeful. Additionally, as most of the currently used counter-ion exchange techniques are time-consuming and burdened by peptide yield reduction risk, development of a new approach is still a sensible solution. In this study, we examined the potential of peptide counter-ion exchange using non-aqueous organic solvents saturated with HCl. Counter-ion exchange of a model peptide, citropin 1.1 (GLFDVIKKVASVIGGL-NH₂), for each solvent was conducted through incubation with subsequent evaporation under reduced pressure, dissolution in water and lyophilization. Each exchange was performed four times and compared to a reference method—lyophilization of the peptide from an 0.1 M HCl solution. The results showed superior counter-ion exchange efficiency for most of the organic solutions in relation to the reference method. Moreover, HCl-saturated acetonitrile and tert-butanol provided a satisfying exchange level after just one repetition. Thus, those two organic solvents can be potentially introduced into routine peptide counter-ion exchange.

Long-term release and stability of pharmaceutical proteins delivered from solid lipid implants

Solid lipid implants (SLIs) prepared by twin-screw (tsc) extrusion represent a promising technology platform for the sustained release of pharmaceutical proteins. In this work, we report on two aspects, long-term release and stability of released protein. First, SLIs were produced by tsc-extrusion containing the low melting triglyceride H12 and the high melting triglyceride Dynasan D118. Two different proteins available in a freeze-dried matrix containing hydroxypropyl-β-cyclodextrine (HP-β-CD) were incorporated into the lipid matrix: a monoclonal antibody (mAb) from the IgG₁ class and the f_ab-fragment Ranibizumab (Lucentis®). SLIs, composed of 10% protein lyophilizate and both triglycerides, were extruded at 35°C and 40rpm. Sustained release of both proteins was observed in a sustained manner for approximately 120days. Protein load per implant was increased by three different approaches resulting in a protein load of 3.00mg per implant without affecting the release profiles. The incubation medium containing the released protein was collected, concentrated and analyzed including liquid chromatography (SE-HPLC, IEX, HIC), electrophoresis (SDS-PAGE, on-chip gel electrophoresis) and FT-IR spectroscopy. The mAb showed a monomer loss of up to 7% (SE-HPLC) and IEX analysis revealed the formation of 16% acidic subspecies after 18weeks. FT-IR spectra of mAb indicated the formation of random coil structures towards the end of the release study. Ranibizumab was mainly released in its monomeric form (>95%), and approximately 5% hydrophobic subspecies were formed after 18weeks of release. FT-IR analysis revealed no changes in secondary structure. The release and stability profiles of both proteins underline the potential of SLIs as a delivery system. SLIs provide a promising platform for applications where really long-term release is needed, for example for intraocular delivery of anti-vascular endothelial growth factor (VEGF) drugs for age related macular degeneration (AMD).

Oral delivery of insulin for treatment of diabetes: status quo, challenges and opportunities

Objectives

Diabetes mellitus is characterised by progressive β-cell destruction and loss of function, or loss of ability of tissues to respond to insulin. Daily subcutaneous insulin injection is standard management for people with diabetes, although patient compliance is hard to achieve due to the inconvenience of injections, so other forms of delivery are being tested, including oral administration. This review summarises the developments in oral insulin administration.

Methods

The PubMed database was consulted to compile this review comparing conventional subcutaneous injection of insulin to the desired oral delivery.

Key findings

Oral administration of insulin has potential benefits in reducing pain and chances of skin infection, improving the portal levels of insulin and avoiding side effects such as hyperinsulinemia, weight gain and hypoglycaemia. Although oral delivery of insulin is an ideal administration route for patients with diabetes, several physiological barriers have to be overcome. An expected low oral bioavailability can be attributed to its high molecular weight, susceptibility to enzymatic proteolysis and low diffusion rate across the mucin barrier.

Conclusions

Strategies for increasing the bioavailability of oral insulin include the use of enzyme inhibitors, absorption enhancers, mucoadhesive polymers and chemical modification for endogenous receptor-mediated absorption. These may help significantly increase patient compliance and disease management.

Identification and characterization of sulfated glycoproteins from small cell lung carcinoma cells assisted by management of molecular charges

Proteins carrying sulfated glycans (i.e., sulfated glycoproteins) are known to be associated with diseases, such as cancer, cystic fibrosis, and osteoarthritis. Sulfated glycoproteins, however, have not been isolated or characterized from complex biological samples due to lack of appropriate tools for their enrichment. Here, we describe a method to identify and characterize sulfated glycoproteins that are involved in chemical modifications to control the molecular charge of the peptides. In this method, acetohydrazidation of carboxyl groups was performed to accentuate the negative charge of the sulfate group, and Girard's T modification of aspartic acid was performed to assist in protein identification by MS tagging. Using this approach, we identified and characterized the sulfated glycoproteins: Golgi membrane protein 1, insulin-like growth factor binding protein-like 1, and amyloid beta precursor-like protein 1 from H2171 cells, a small cell lung carcinoma cell line. These sulfated glycoproteins carry a complex-type N-glycan with a core fucose and 4'-O-sulfated LacdiNAc as the major glycan.

Liquid chromatography-fluorescence and liquid chromatography-mass spectrometry detection of tryptophan degradation products of a recombinant monoclonal antibody

Light exposure is one of several conditions used to study the degradation pathways of recombinant monoclonal antibodies. Tryptophan is of particular interest among the 20 amino acids because it is the most photosensitive. Tryptophan degradation forms several products, including an even stronger photosensitizer and several reactive oxygen species. The current study reports a specific peptide mapping procedure to monitor tryptophan degradation. Instead of monitoring peptides using UV 214 nm, fluorescence detection with an excitation wavelength of 295 nm and an emission wavelength of 350 nm was used to enable specific detection of tryptophan-containing peptides. Peaks that decreased in area over time are likely to contain susceptible tryptophan residues. This observation can allow further liquid chromatography-mass spectrometry (LC-MS) analysis to focus only on those peaks to confirm tryptophan degradation products. After confirmation of tryptophan degradation, susceptibility of tryptophan residues can be compared based on the peak area decrease.

Characterization of the degradation products of a color-changed monoclonal antibody: tryptophan-derived chromophores

We describe the characterization of degradation products responsible for color change in near UV-visible light-irradiated and heat-stressed monoclonal antibody (mAb) drug product in liquid formulation. The treated samples were characterized using reversed-phase HPLC and size-exclusion HPLC with absorption spectroscopy. Both methods showed color change was due to chromophores formed on the mAb but not associated with the formulation excipients in both light-irradiated and heat-stressed mAb samples. These chromophores were further located by a new peptide mapping methodology with a combination of mass spectrometry and absorption spectroscopy. Mass spectrometry identified the major tryptophan oxidation products as kynurenine (Kyn), N-formylkynurenine (NFK), and hydroxytryptophan (OH-Trp). The absorption spectra showed that each of the tryptophan oxidation products exhibited a distinct absorption band above 280 nm shifted to the longer wavelengths in the order of OH-Trp < NFK < Kyn. The Kyn-containing peptide was detected by absorption at 420 nm. No new absorption bands were observed for either methionine or histidine oxidation products. This confirmed that tryptophan oxidation products, but not methionine and histidine oxidation products, were responsible for the color change. It is worth noting that a new oxidation product with the loss of hydrogen (2 Da mass decrease) for Trp-107 of the heavy chain was identified in the heat-stressed mAb sample. This oxidized tryptophan residue exhibited a distinct absorption band at the maximum absorbance wavelength 335 nm, which is responsible for the color change to yellow. This study showed that the new peptide mapping methodology with a combination of mass spectrometry and absorption spectroscopy is useful to identify tryptophan oxidation products as chromophores responsible for color change in stressed mAb drug product.

Application and challenges in using LC–MS assays for absolute quantitative analysis of therapeutic proteins in drug discovery

As more protein therapeutics enter the drug-discovery pipeline, the traditional ligand-binding assay (LBA) faces additional challenges to meet the rapid and diverse bioanalytical needs in the early drug-discovery stage. The high specificity and sensitivity afforded by LC–MS, along with its rapid method development, is proving invaluable for the analysis of protein therapeutics in support of drug discovery. LC–MS not only serves as a quantitative tool to complement LBA in drug discovery, it also provides structural details at a molecular level, which are used to address issues that cannot be resolved using LBA alone. This review will describe the key benefits and applications, as well as the techniques and challenges for applying LC–MS to support protein quantification in drug discovery.

Enantiomeric separation of free L- and D-amino acids in hydrolyzed protein fertilizers by capillary electrophoresis tandem mass spectrometry

Two capillary electrophoresis-tandem mass spectrometry (CE-MS(2)) methods were optimized in this work using cyclodextrins (CDs) as chiral selectors in order to determine the degree of racemization of the free amino acids contained in different hydrolyzed protein fertilizers used as plant biostimulants. The methodologies developed were characterized by the specificity of MS(2) experiments enabling the identification of all protein amino acids, except for cysteine. The enantiomeric separation of up to 14 amino acids was achieved with resolutions above 1.0 and limits of detection between 0.02 and 0.8 μM. The methods were applied to the analysis of complex samples such as hydrolyzed protein fertilizers to evaluate the presence of d-amino acids after different kinds of hydrolysis treatments. The results corroborated the absence or almost negligible presence of enantiomeric conversions of the L-amino acids into D-amino acids in the case of fertilizers obtained by enzymatic hydrolysis, as well as the high racemization rate for those obtained through a chemical hydrolysis.

Analysis of recombinant monoclonal antibodies by capillary zone electrophoresis

Analytical platforms that characterize charge heterogeneity in therapeutic proteins, such as mAbs, are important tools that can be used to define quality attributes. CZE separates protein moieties close to their native state and is a valuable physicochemical analytical method that can be used in parallel with other orthogonal methods for characterization and comparability. In this study, custom conditions for the analysis of charge heterogeneity of two mAbs were developed with regard to critical parameters in the BGE, running conditions, and sample treatment. The method application was tested for up to four mAbs and one mAb fragment. The electropherograms showed specific profiles and contrasting levels of basic and acidic isoforms with respect to the main isoform. Issues that surround this method, such as peak tailing and capillary lifetime, are summarized. Using this method, the identities of rituximab and trastuzumab were confirmed, based on the correspondence between the biosimilars and reference products, noninterference of the sample matrix, and the ability to separate spiked samples of related mAbs. The RSD of the isoform content and migration time for the method repeatability were less than 2 and 1%, respectively.

Metabolic stability of long-acting luteinizing hormone-releasing hormone antagonists

Long-acting luteinizing hormone-releasing hormone (LHRH) antagonists designed to be protease resistant consisted of a series of novel decapeptides structurally similar to LHRH. The aim of this study was to evaluate the in vitro metabolic stability of the LHRH decapeptides using pancreatin and homogenates models and identify the metabolites in rat liver homogenate for the purpose of illustrating the metabolic features of the decapeptides. The major metabolites in rat liver homogenate were identified by LC-ESI-MS(n). The half-lives of the 11 LHRH decapeptides were from 44 to 330 min in the pancreatin model. The half-lives of the five decapeptides in rat liver, kidney and lung homogenates were between 8 and 462 min. The most stable decapeptides were the LY616 and LY608 peptides with half-lives of 36 min in liver homogenate. Two major cleavage sites were found by analysing the metabolites of the LY618 peptide in rat liver homogenate, between the Pal(3)-Ser(4) and the Leu(7)-Ilys(8) peptide bonds. The major metabolites were produced via cleavages of peptide bonds at these sites, and further metabolic reactions such as hydroxylation, oxidative dechlorination, alcohol dehydration and isopropyl dealkylation were also observed.

Particles in therapeutic protein formulations, Part 1: overview of analytical methods

The presence of particles is a major issue during therapeutic protein formulation development. Both proteinaceous and nonproteinaceous particles need to be analyzed not only due to the requirements of the Pharmacopeias but also to monitor the stability of the protein formulation. Increasing concerns about the immunogenic potential together with new developments in particle analysis make a comparative description of established and novel analytical methods useful. Our review aims to provide a comprehensive overview on analytical methods for the detection and characterization of visible and subvisible particles in therapeutic protein formulations. We describe the underlying theory, benefits, shortcomings, and illustrative examples for quantification techniques, as well as characterization techniques for particle shape, morphology, structure, and identity.

Bioanalytical approaches to analyzing peptides and proteins by LC–MS/MS

Peptides and proteins have been utilized as therapeutic agents for over 40 years. Traditional approaches to quantify these molecules in biological matrices have utilized immunoassay approaches that can be time inefficient, lack assay specificity and have limited analytical ranges. The advances in sample preparation technologies, chromatographic systems and their chemistries, mass spectrometers and their software over the last decade have meant that LC–MS/MS approaches to peptide and protein quantification are feasible and can overcome the problems associated with quantification by immunoassay. In this article we present an overview of the challenges and approaches to overcome them when performing quantitative bioanalysis of peptides and proteins by LC–MS/MS.

FTIR markers of methionine oxidation for early detection of oxidized protein therapeutics

The biological activity of therapeutic proteins is strongly dependent on the stability of their folded state, which can easily be compromised by degradation. Oxidation is one of the most common causes of degradation and is typically associated with impairment of the native protein structure. Methionine residues stand out as particularly susceptible to oxidation by reactive oxygen intermediates even under mild conditions. Consequently, methionine oxidation has profound effects on protein activity up to the point of adverse biological responses. Of immediate importance therefore is finding affordable approaches for rapid detection of methionine oxidation before any substantial structural changes can ensue. Herein we report that vibrational bands at 1,044 and 1,113 cm⁻¹ in the mid-infrared region can serve as characteristic markers of methionine oxidation in oxidatively stressed protein therapeutics, monoclonal antibodies (IgG1 and its antigen-binding fragment). Such Fourier-transform infrared (FTIR) markers underpin rapid detection assays and hold particular promise for correlation of methionine oxidation with protein structure and function.

Isobaric labeling approach to the tracking and relative quantitation of peptide damage at the primary structural level

Protein oxidative damage lies behind skin and hair degradation and the deterioration of protein-based products, such as wool and meat, in addition to a range of serious health problems. Effective strategies to ameliorate degenerative processes require detailed fundamental knowledge of the chemistry at the molecular level, including specific residue-level products and their relative abundance. This paper presents a new means of tracking damage-induced side-chain modification in peptides using a novel application for isobaric label quantification. Following exposure to heat and UVA and UVB irradiation, tryptophan and tyrosine damage products in synthetic peptides were characterized and tracked using ESI-MS/MS and iTRAQ labeling-based relative quantification. An in-depth degradation profile of these peptides was generated, enabling the formation of even low-abundance single-residue-level modifications to be sensitively monitored. The development of this novel approach to profiling and tracking residue-level protein damage offers significant potential for application in the development and validation of protein protection treatments.

Analysis of identity, charge variants, and disulfide isomers of monoclonal antibodies with capillary zone electrophoresis in an uncoated capillary column

A set of related capillary zone electrophoresis (CZE) methods have been developed for the analysis of identity, charge variants, and disulfide isoforms of IgG monoclonal antibodies (mAbs). These methods utilize an uncoated capillary column. The combined use of concentrated zwitterionic (e-amino-caproic acid) buffer and acid flushing was effective in minimizing the adsorption of protein to the inner wall of a bare capillary. Under these conditions, a selective and reproducible separation of multiple IgG1 and IgG2 monoclonal antibodies (mAbs) was obtained with a long capillary column (40 cm effective length), allowing the reliable identification of different mAbs by migration time. A rapid ( approximately 10 min) and selective separation of charged variants of IgG mAbs was attained using a short capillary column (10 cm effective length). Finally, the addition of urea in the separation buffer resulted in the separation of disulfide isoforms of IgG2 mAbs by CZE. CZE methods using an uncoated capillary column offer a versatile, generic, and economical approach to the evaluation of identity, charge heterogeneity, and disulfide isoforms of IgG antibodies.

Stability of protein pharmaceuticals: an update

In 1989, Manning, Patel, and Borchardt wrote a review of protein stability (Manning et al., Pharm. Res. 6:903-918, 1989), which has been widely referenced ever since. At the time, recombinant protein therapy was still in its infancy. This review summarizes the advances that have been made since then regarding protein stabilization and formulation. In addition to a discussion of the current understanding of chemical and physical instability, sections are included on stabilization in aqueous solution and the dried state, the use of chemical modification and mutagenesis to improve stability, and the interrelationship between chemical and physical instability.

Profiling of residue-level photo-oxidative damage in peptides

Protein and peptide oxidation is a key feature in the progression of a variety of disease states and in the poor performance of protein-based products. The present work demonstrates a mass spectrometry-based approach to profiling degradation at the amino acid residue level. Synthetic peptides containing the photosensitive residues, tryptophan and tyrosine, were used as models for protein-bound residue photodegradation. Electrospray ionisation tandem mass spectrometry (ESI-MS/MS) was utilised to characterise and provide relative quantitative information on the formation of photoproducts localised to specific residues, including the characterisation of low abundance photomodifications not previously reported, including W + 4O modification, hydroxy-bis-tryptophandione and topaquinone. Other photoproducts observed were consistent with the formation of tyrosine-derived dihydroxyphenylalanine (dopa), trihydroxyphenylalanine, dopa-quinone and nitrotyrosine, and tryptophan-derived hydroxytryptophan, dihydroxytryptophan/N-formylkynurenine, kynurenine, hydroxyformylkynurenine, tryptophandiones, tetrahydro-beta-carboline and nitrotryptophan. This approach combined product identification and abundance tracking to generate a photodegradation profile of the model system. The profile of products formed yields information on formative mechanisms. Profiling of product formation offers new routes to identify damage markers for use in tracking and controlling oxidative damage to polypeptides.

Study of aggregation, denaturation and reduction of interferon alpha-2 products by size-exclusion high-performance liquid chromatography with fluorescence detection and biological assays

Interferon alpha-2 (IFN alpha-2) products have been widely used as antivirals for the treatment of serious diseases such as hepatitis B and C. However, reports of adverse reactions following treatment have prompted investigations into the cause of these undesirable events. In this study size-exclusion HPLC (SE-HPLC) methods coupled with intrinsic fluorescence detection were developed for evaluating the stability and degradation profiles of IFN alpha-2 drug substances and drug products. The method allowed baseline resolution of the active ingredient from the excipients present in the finished products that included large amounts of albumin. Limits of detection (S/N>or=3) for IFN alpha-2a and IFN alpha-2b were 32 ng/mL and 28 ng/mL, respectively and good repeatability of chromatographic profiles (%RSD<2.1) was obtained. High molecular weight (HMW) aggregates with apparent molecular weight of approximately 650 kDa as well as dimers, denatured and reduced variants were successfully identified and separated from native IFN alpha-2 proteins. This chromatographic method, which quantitatively measures physical and chemical changes taking place in solution formulations, was found to be capable of monitoring IFN alpha-2a and IFN alpha-2b stability. Potency assay results revealed up to 87% decrease in biological activity of the physically and chemically altered variants compared to the original IFNs.

Size exclusion chromatography coupled to electrospray ionization mass spectrometry for analysis and quantitative characterization of arsenic interactions with peptides and proteins

Arsenic-binding proteins are of toxicological importance since enzymatic activities can be blocked by arsenic interactions. In the present work, a novel methodology based on size exclusion chromatography coupled to electrospray ionization mass spectrometry (SEC-ESI-MS) was developed with special emphasis to preserve the intact proteins and their arsenic bindings. The eluent composition of 25 mMTris/HCl, pH 7.5, with the addition of 100-mM NaCl optimized for SEC with UV detection provided the highest SEC separation efficiency, but was not compatible with the ESI-MS because of the non-volatility of the buffer substance and of the salt additive. In order to find the best compromise between chromatographic separation and ionization of the arsenic-binding proteins, buffer type and concentration, pH value, portion of organic solvent in the SEC eluent as well as the flow rate were varied. In the optimized procedure five different arsenic-binding peptides and proteins (glutathione, oxytocin, aprotinin, alpha-lactalbumin, thioredoxin) covering a molar mass range of 0.3-14 kDa could be analyzed using 75% 10-mM ammonium formate, pH 5.0/25% acetonitrile (v : v) as eluent and a turbo ion spray source operated at 300 degrees C and 5.5 kV. A complete differentiation of all peptides and proteins involved in the arsenic-binding studies as well as of their arsenic-bound forms has become feasible by means of the extracted ion chromatograms (XIC) of the mass spectrometric detection. The new method offered the possibility to estimate equilibrium constants for the reaction of phenylarsine oxide with different thiol-containing biomolecules by means of the XIC peak areas of reactants and products. Limits of detection in the range of 2-10 microM were obtained by SEC-ESI-MS for the individual proteins.