Mucoadhesive thiolated chitosans as platforms for oral controlled drug delivery: synthesis and in vitro evaluation

Recent Advances in the Application of Hydrogels as Drug Carriers in Inflammatory Bowel Disease: A Review

Inflammatory bowel disease (IBD) is a chronic and refractory disease with increasing incidence, adversely impacting millions of patients worldwide. Current therapeutic strategies for IBD often exhibit considerable adverse effects, limited efficacy, and a high tendency for recurrence, highlighting the urgent need for novel therapeutic agents. Hydrogel, a three-dimensional hydrophilic network polymer material known for its excellent biocompatibility and responsiveness to stimuli, has been effectively utilized as a drug carrier across various therapeutic systems. The hydrogels' application in IBD treatment holds significant promise for enhancing therapeutic outcomes. This review synthesizes recent advancements in leveraging hydrogels as drug carriers for IBD management. The discussion encompasses the response mechanisms of hydrogels, their application in IBD therapy, and methods of administration. As drug delivery matrices, hydrogels exhibit considerable potential for treating IBD.

Artificial mucus layer formed in response to ROS for the oral treatment of inflammatory bowel disease

The artificial mucus layer, such as hydrogels, used to repair the damaged intestinal barrier, is a promising treatment for inflammatory bowel disease (IBD). However, the currently reported hydrogel-based artificial barriers are administered via rectal injection, causing unnecessary discomfort to patients. Herein, we report an oral hydrogel precursor solution based on thiol-modified hyaluronic acid (HASH). Owing to the reactive oxygen species (ROS)-responsive gelling behavior, our precursor solution formed an artificial mucus coating over the inflamed regions of the intestines, blocking microbial invasion and reducing abnormally activated immune responses. Notably, HASH also modulated the gut microbiota, including increasing the diversity and enhancing the abundance of short-chain fatty acid-associated bacteria, which play a key role in gut homeostasis. We believe that the ROS-responsive artificial mucus layer is a promising strategy for the oral treatment of IBD.

Thiolated chitosan encapsulation constituted mucoadhesive nanovaccine confers broad protection against divergent influenza A viruses

Influenza A virus (IAV) poses a significant threat to human and animal health, necessitating the development of universal influenza vaccines that can effectively activate mucosal immunity. Intranasal immunization has attracted significant attention due to its capacity to induce triple immune responses, including mucosal secretory IgA. However, inducing mucosal immunity through vaccination is challenging due to the self-cleansing nature of the mucosal surface. Thiolated chitosan (TCS) were explored for mucosal vaccine delivery, capitalizing on biocompatibility and bioadhesive properties of chitosan, with thiol modification enhancing mucoadhesive capability. The focus was on developing a universal nanovaccine by utilizing TCS-encapsulated virus-like particles displaying conserved B-cell and T-cell epitopes from M2e and NP proteins of IAV. The optimal conditions for nanoparticle formation were investigated by adjusting the thiol groups content of TCS and the amount of sodium tripolyphosphate. The nanovaccine induced robust immune responses and provided complete protection against IAVs from different species following intranasal immunization. The broad protective effect of nanovaccines can be attributed to the synergistic effect of antibodies and T cells. This study developed a universal intranasal nanovaccine and demonstrated the potential of TCS in the development of mucosal vaccines for respiratory infectious diseases.

Multiple Natural Polymers in Drug and Gene Delivery Systems

Natural polymers are organic compounds produced by living organisms. In nature, they exist in three main forms, including proteins, polysaccharides, and nucleic acids. In recent years, with the continuous research on drug and gene delivery systems, scholars have found that natural polymers have promising applications in drug and gene delivery systems due to their excellent properties such as biocompatibility, biodegradability, low immunogenicity, and easy modification. However, since the structure, physicochemical properties, pharmacological properties and biological characteristics of biopolymer molecules have not yet been entirely understood, further studies are required before large-scale clinical application. This review focuses on recent advances in the representative natural polymers such as proteins (albumin, collagen, elastin), polysaccharides (chitosan, alginate, cellulose) and nucleic acids. We introduce the characteristics of various types of natural polymers, and further outline the characterization methods and delivery forms of these natural polymers. Finally, we discuss possible challenges for natural polymers in subsequent experimental studies and clinical applications. It provides an important strategy for the clinical application of natural polymers in drug and gene delivery systems.

Biopharmaceutical applications of microbial polysaccharides as materials: A review

Biological characteristics of natural polymers make microbial polysaccharides an excellent choice for biopharmaceuticals. Due to its easy purifying procedure and high production efficiency, it is capable of resolving the existing application issues associated with some plant and animal polysaccharides. Furthermore, microbial polysaccharides are recognized as prospective substitutes for these polysaccharides based on the search for eco-friendly chemicals. In this review, the microstructure and properties of microbial polysaccharides are utilized to highlight their characteristics and potential medical applications. From the standpoint of pathogenic processes, in-depth explanations are provided on the effects of microbial polysaccharides as active ingredients in the treatment of human diseases, anti-aging, and drug delivery. In addition, the scholarly developments and commercial applications of microbial polysaccharides as medical raw materials are also discussed. The conclusion is that understanding the use of microbial polysaccharides in biopharmaceuticals is essential for the future development of pharmacology and therapeutic medicine.

The Role of Mucoadhesion and Mucopenetration in the Immune Response Induced by Polymer-Based Mucosal Adjuvants

Mucus is a viscoelastic gel that acts as a protective barrier for epithelial surfaces. The mucosal vehicles and adjuvants need to pass through the mucus layer to make drugs and vaccine delivery by mucosal routes possible. The mucoadhesion of polymer particle adjuvants significantly increases the contact time between vaccine formulations and the mucosa; then, the particles can penetrate the mucus layer and epithelium to reach mucosa-associated lymphoid tissues. This review presents the key findings that have aided in understanding mucoadhesion and mucopenetration while exploring the influence of physicochemical characteristics on mucus-polymer interactions. We describe polymer-based particles designed with mucoadhesive or mucopenetrating properties and discuss the impact of mucoadhesive polymers on local and systemic immune responses after mucosal immunization. In future research, more attention paid to the design and development of mucosal adjuvants could lead to more effective vaccines.

Biodegradable Biopolymeric Nanoparticles for Biomedical Applications-Challenges and Future Outlook

Biopolymers are polymers obtained from either renewable or non-renewable sources and are the most suitable candidate for tailor-made nanoparticles owing to their biocompatibility, biodegradability, low toxicity and immunogenicity. Biopolymeric nanoparticles (BPn) can be classified as natural (polysaccharide and protein based) and synthetic on the basis of their origin. They have been gaining wide interest in biomedical applications such as tissue engineering, drug delivery, imaging and cancer therapy. BPn can be synthesized by various fabrication strategies such as emulsification, ionic gelation, nanoprecipitation, electrospray drying and so on. The main aim of the review is to understand the use of nanoparticles obtained from biodegradable biopolymers for various biomedical applications. There are very few reviews highlighting biopolymeric nanoparticles employed for medical applications; this review is an attempt to explore the possibilities of using these materials for various biomedical applications. This review highlights protein based (albumin, gelatin, collagen, silk fibroin); polysaccharide based (chitosan, starch, alginate, dextran) and synthetic (Poly lactic acid, Poly vinyl alcohol, Poly caprolactone) BPn that has recently been used in many applications. The fabrication strategies of different BPn are also being highlighted. The future perspective and the challenges faced in employing biopolymeric nanoparticles are also reviewed.

Thermoresponsive mucoadhesive hybrid gels in advanced drug delivery systems

Thermoresponsive polymers have seen extensive use in the development of stimuli-responsive drug formulations for oral, buccal, nasal, ocular, topical, rectal, parenteral, and vaginal routes of administration. Despite their great potential, their use has been limited by various obstacles, such as undesirable high polymer concentration, wide gelation temperature, low gel strength, poor mucoadhesiveness, and short retention. Mucoadhesive polymers have been suggested to improve the mucoadhesive features of thermoresponsive gels, leading to increased drug bioavailability and efficacy. This article highlights the use of in-situ thermoresponsive mucoadhesive hydrogel blends or hybrids that have been developed and assessed in various routes of administration.

Chitosan-maleic acid conjugate as potential excipient candidate for oral drug delivery?

Aim: To develop and evaluate chitosan-maleic acid conjugate. Methods: Maleic anhydride was attached to chitosan backbone via amide bond formation resulting in chitosan-maleic acid. After characterization of the product via ¹H nuclear magnetic resonance, attenuated total reflectance-Fourier transform IR spectroscopy and 2,4,6-trinitrobenzenesulfonic acid assay, examination of mucoadhesion assessment was carried out. Results: The conjugate presented 44.91% modification and no toxicity could be observed after 1 day of incubation. Mucoadhesive properties exhibited 40.97-fold, 13.31-fold and 9.07-fold increase in elastic modulus, dynamic viscosity and viscous modulus, respectively. Moreover, detachment time was increased in 44.44-fold. Conclusion: Chitosan-maleic acid demonstrated enhanced in mucoadhesive properties resulting in biocompatibility. Therefore, potent candidates as polymeric excipients for oral drug delivery could be developed over corresponding chitosan.

Thiolated Polymeric Hydrogels for Biomedical Applications: A Review

Hydrogels are a three-dimensional (3D) network of hydrophilic polymers. The physical and chemical crosslinking of polymeric chains maintains the structure of the hydrogels even when they are swollen in water. They can be modified with thiol by thiol epoxy, thiol-ene, thiol-disulfide, or thiol-one reactions. Their application as a matrix for protein and drug delivery, cellular immobilization, regenerative medicine, and scaffolds for tissue engineering was initiated in the early 21st century. This review focuses on the ingredients, classification techniques, and applications of hydrogels, types of thiolation by different thiol-reducing agents, along with their mechanisms. In this study, different applications for polymers used in thiolated hydrogels, including dextran, gelatin, polyethylene glycol (PEG), cyclodextrins, chitosan, hyaluronic acid, alginate, poloxamer, polygalacturonic acid, pectin, carrageenan gum, arabinoxylan, carboxymethyl cellulose (CMC), gellan gum, and polyvinyl alcohol (PVA) are reviewed.

Preparation and ex vivo investigation of an injectable microparticulate formulation for gastrointestinal mucosa polyp resection

Endoscopic submucosal dissection (ESD) and endoscopic submucosal resection (EMR) are non-invasive endoscopic techniques. They allow an early excised gastrointestinal (GI) mucosal precancerous lessions. For their application is necessary use of a submucosal injection that lift area to excise. The main objective of this study was the preparation of microparticulate-based fluid for injection in the GI submucosa. Alginate microparticles (MPs) were developed by the solvent displacement technique and characterized by particle size, surface electrical properties, swelling, degradation, rheology, adhesion and leakage, syringeablity and stability. Furthermore, their potential to form a submucosal cushion was assayed in porcine stomach mucosa and porcine colon mucosa. Results showed MPs sizes below 160 μm, negative surface charge around -50 mV at pH=6, high rates of swelling and good adhesion. The microparticulate-based fluid exhibited pseudoplastic behavior following the Ostwald-de Waele rheological model. A brief force is sufficient for its injection through a syringe. Finally, formulations were able to provide a submucosa elevation of 1.70 cm for more than 90 min and 120 min in the porcine stomach and colon, respectively.

SEDDS-loaded mucoadhesive fiber patches for advanced oromucosal delivery of poorly soluble drugs

To date, buccal administration of lipophilic drugs is still a major challenge due to their poor solubility in saliva and limited penetration into mucosal tissues. To overcome these limitations, we developed electrospun patches combining the benefits of mucoadhesive fibers and self-emulsifying drug delivery systems (SEDDS). The fiber system comprises a combination of mucoadhesive thiolated polyacrylic acid fibers and SEDDS-loaded fibers fabricated by parallel electrospinning. The resulting mucoadhesive electrospun SEDDS patches were systemically investigated for fiber characteristics, self-emulsification, mucoadhesion, drug penetration into porcine buccal tissue and biocompatibility. The patches showed high encapsulation efficiency for SEDDS without causing fiber defects or leakage. SEDDS incorporation enhanced the spinning process and reduced the fiber diameter and fiber size distribution. Hydration-dependent self-emulsification provided a controlled release of curcumin being encapsulated in nano-scaled o/w emulsion for over 3 h. Due to the thiolated polyacrylic acid fibers, the buccal residence time of patches was 200-fold prolonged. Further, they promoted a significantly increased drug penetration into buccal tissue compared to fiber patches without SEDDS. Finally, biocompatibility and improved therapeutic effects of curcumin-loaded patches on human keratinocytes and fibroblasts were confirmed. Mucoadhesive electrospun SEDDS patches represent a promising approach to overcome current challenges in the oromucosal delivery of lipophilic drugs to unlock their full therapeutic potential.

Chitosan-based biomaterials for the treatment of bone disorders

Bone is an alive and dynamic organ that is well-differentiated and originated from mesenchymal tissues. Bone undergoes continuous remodeling during the lifetime of an individual. Although knowledge regarding bones and their disorders has been constantly growing, much attention has been devoted to effective treatments that can be used, both from materials and medical performance points of view. Polymers derived from natural sources, for example polysaccharides, are generally biocompatible and are therefore considered excellent candidates for various biomedical applications. This review outlines the development of chitosan-based biomaterials for the treatment of bone disorders including bone fracture, osteoporosis, osteoarthritis, arthritis rheumatoid, and osteosarcoma. Different examples of chitosan-based formulations in the form of gels, micro/nanoparticles, and films are discussed herein. The work also reviews recent patents and important developments related to the use of chitosan in the treatment of bone disorders. Although most of the cited research was accomplished before reaching the clinical application level, this manuscript summarizes the latest achievements within chitosan-based biomaterials used for the treatment of bone disorders and provides perspectives for future scientific activities.

Synthesis and Characterization of a Cationic Thiomer Based on Ethyl Cellulose for Realization of Mucoadhesive Tablets and Nanoparticles

Purpose

Ethyl cellulose (EC) based nanoparticles are being extensively studied for their ability to achieve prolonged drug release and improve drug stability. Within this study, the thiolation of unmodified EC using cysteamine as a ligand was carried out to design nanoparticles with mucoadhesive properties and comparatively strong lipophilic properties.

Methods

The thiolation was performed via oxidation and reductive amination, whereas the nanoparticles were generated via the ionic gelation followed by the precipitation method.

Results

The number of free thiol groups on EC-cysteamine was in the range of 210-261 µmol per gram of polymer. Tablets based on EC-cysteamine demonstrated mucoadhesive properties 16.7-fold improved compared with those comprising unmodified EC. The mean diameter of the particles was in the range of 94-123 nm and the zeta potential was determined to be -7.97 to -14.70 mV. The nanoparticles remained attached to porcine intestinal mucosa for up to 36% after 3 h of incubation. The formation of nanoparticles improved the stability of EC-cysteamine conjugate against cellulase and provided a zero-order release. Moreover, both EC-cysteamine and the nanoparticles did not show any pronounced cytotoxicity.

Conclusion

Accordingly, EC-cysteamine nanoparticles could be a specific type of nanoparticulate delivery system with mucoadhesive properties. The amount of free thiol groups within EC-cysteamine nanoparticles together with their lipophilic properties could be further modified and modulated for a desired release behavior.

Novel Chitosan Derivatives and Their Multifaceted Biological Applications

Chitosan is a rather attractive material, especially because of its bio-origins as well as generation from exoskeletal waste. As the mantle has been effectively transferred from chitin to chitosan, so has it been extrapolated to in-house synthesized novel chitosan derivatives. This review comprehensively lists the available novel chitosan derivatives (ChDs) and summarizes their biological applications. The fact that chitosan derivatives do comprise multifaceted biological applications is attested by the voluminous reports on their varied contributions. However, this review points out to the fact that there has been selective focus on bio functions such as antifungal, antioxidant, antibacterial, whereas other biomedical applications and antiviral applications remain relatively less explored. With their current functionality record, there is definitely no doubt that the plethora of synthesized ChDs will have a profound impact on the unexplored biological aspects. This review points out this lacuna as room for future exploration.

Biodistribution of Cy5-labeled Thiolated and Methylated Chitosan-Carboxymethyl Dextran Nanoparticles in an Animal Model of Retinoblastoma

Purpose

The use of more potent medicine for local chemotherapy of retinoblastoma in order to minimize local and systemic adverse effects is essential. The main goal of this investigation was to assess the biodistribution of thiolated and methylated chitosan-carboxymethyl dextran nanoparticles (CMD-TCs-NPs and CMD-TMC-NPs) following intravitreal (IVT) injection into rat eyes with retinoblastoma.

Methods

An ionic gelation method was used to fabricate Cy5-labelled CMD-TCs-NPs and CMD-TMC-NPs. The NPs were characterized. Cellular internalization of Cy5-labelled NPs was investigated using confocal microscopy and the absorption of labeled NPs was quantified by flow cytometry in human retinoblastoma (Y79) cells. In addition, the Cy5-labeled distribution of nanoparticles in the posterior segment of the eye was histologically imaged by confocal microscopy after IVT injection of NPs into the eyes of rats with retinoblastoma.

Results

CMD-TCs-NPs and CMD-TMC-NPs showed a mean diameter of 34 ± 3.78 nm and 42 ± 4.23 nm and zeta potential of +11 ± 2.27 mV and +29 ± 4.31mV, respectively. The in vivo study of intraocular biodistribution of Cy5-labeled CMD-TCs-NPs and CMD-TMC-NPs revealed that there is more affinity of CMD-TCs-NPs to the retina and retinoblastoma tumor after IVT administration while methylated chitosan nanoparticles are immobilized in the vitreous and are not able to reach the retina even after 24 hr.

Conclusion

The ionic gelation technique was efficient in synthesizing a biocompatible polymeric nanosystem for drug delivery into the posterior segment of the eye. The current study demonstrated increased ocular bioavailability of CMD-TCs-NPs relative to CMD-TMC-NPs in retinoblastoma induced rat eyes.

Development of mucoadhesive modified kappa-carrageenan/pectin patches for controlled delivery of drug in the buccal cavity

In this study, modified kappa-carrageenan/pectin hydrogel patches were fabricated for treatment of buccal fungal infections. For this purpose, kappa-carrageenan-g-acrylic acid was modified with different thiolated agents (L-cysteine and 3-mercaptopropionic acid), and the thiol content of the resulting modified kappa-carrageenan was confirmed by elemental analyzer. Then, the hydrogel patches were fabricated, and characterized by Fourier-transform infrared spectroscopy, thermogravimetric analysis, ex vivo mucoadhesion test, and swelling behavior. Triamcinolone acetonide was added either directly or by encapsulating within the poly(lactic-co-glycolic acid) nanoparticles. The release amount of the drug from the directly loaded patch was 7.81 mg/g polymer, while it was 3.28 mg/g polymer for the encapsulated patch with the same content at 7 hr. The hydrogel patches had no cytotoxicity by cell culture studies. Finally, the drug loaded hydrogel patches were demonstrated antifungal activity against Aspergillus fumigatus and Aspergillus flavus. These results provide that the novel modified kappa-carrageenan and pectin based buccal delivery system has promising antifungal property, and could have advantages compared to conventional buccal delivery systems.

Recent Advancement in Chitosan-Based Nanoparticles for Improved Oral Bioavailability and Bioactivity of Phytochemicals: Challenges and Perspectives

The excellent therapeutic potential of a variety of phytochemicals in different diseases has been proven by extensive studies throughout history. However, most phytochemicals are characterized by a high molecular weight, poor aqueous solubility, limited gastrointestinal permeability, extensive pre-systemic metabolism, and poor stability in the harsh gastrointestinal milieu. Therefore, loading of these phytochemicals in biodegradable and biocompatible nanoparticles (NPs) might be an effective approach to improve their bioactivity. Different nanocarrier systems have been developed in recent decades to deliver phytochemicals. Among them, NPs based on chitosan (CS) (CS-NPs), a mucoadhesive, non-toxic, and biodegradable polysaccharide, are considered the best nanoplatform for the oral delivery of phytochemicals. This review highlights the oral delivery of natural products, i.e., phytochemicals, encapsulated in NPs prepared from a natural polymer, i.e., CS, for improved bioavailability and bioactivity. The unique properties of CS for oral delivery such as its mucoadhesiveness, non-toxicity, excellent stability in the harsh environment of the GIT, good solubility in slightly acidic and alkaline conditions, and ability to enhance intestinal permeability are discussed first, and then the outcomes of various phytochemical-loaded CS-NPs after oral administration are discussed in detail. Furthermore, different challenges associated with the oral delivery of phytochemicals with CS-NPs and future directions are also discussed.

Novel Chitosan-Silica Hybrid Hydrogels for Cell Encapsulation and Drug Delivery

Hydrogels constructed from naturally derived polymers provide an aqueous environment that encourages cell growth, however, mechanical properties are poor and degradation can be difficult to predict. Whilst, synthetic hydrogels exhibit some improved mechanical properties, these materials lack biochemical cues for cells growing and have limited biodegradation. To produce hydrogels that support 3D cell cultures to form tissue mimics, materials must exhibit appropriate biological and mechanical properties. In this study, novel organic-inorganic hybrid hydrogels based on chitosan and silica were prepared using the sol-gel technique. The chemical, physical and biological properties of the hydrogels were assessed. Statistical analysis was performed using One-Way ANOVAs and independent-sample t-tests. Fourier transform infrared spectroscopy showed characteristic absorption bands including amide II, Si-O and Si-O-Si confirming formation of hybrid networks. Oscillatory rheometry was used to characterise the sol to gel transition and viscoelastic behaviour of hydrogels. Furthermore, in vitro degradation revealed both chitosan and silica were released over 21 days. The hydrogels exhibited high loading efficiency as total protein loading was released in a week. There were significant differences between TC2G and C2G at all-time points (p < 0.05). The viability of osteoblasts seeded on, and encapsulated within, the hydrogels was >70% over 168 h culture and antimicrobial activity was demonstrated against Pseudomonas aeruginosa and Enterococcus faecalis. The hydrogels developed here offer alternatives for biopolymer hydrogels for biomedical use, including for application in drug/cell delivery and for bone tissue engineering.

Polymer-Based Carriers in Dental Local Healing-Review and Future Challenges

Polymers in drug formulation technology and the engineering of biomaterials for the treatment of oral diseases constitute a group of excipients that often possess additional properties in addition to their primary function, i.e., biological activity, sensitivity to stimuli, mucoadhesive properties, improved penetration of the active pharmaceutical ingredient (API) across biological barriers, and effects on wound healing or gingival and bone tissue regeneration. Through the use of multifunctional polymers, it has become possible to design carriers and materials tailored to the specific conditions and site of application, to deliver the active substance directly to the affected tissue, including intra-periodontal pocket delivery, and to release the active substance in a timed manner, allowing for the improvement of the form of application and further development of therapeutic strategies. The scope of this review is polymeric drug carriers and materials developed from selected multifunctional groups of natural, semi-synthetic, and synthetic polymers for topical therapeutic applications. Moreover, the characteristics of the topical application and the needs for the properties of carriers for topical administration of an active substance in the treatment of oral diseases are presented to more understand the difficulties associated with the design of optimal active substance carriers and materials for the treatment of lesions located in the oral cavity.

Thiolated-Polymer-Based Nanoparticles as an Avant-Garde Approach for Anticancer Therapies-Reviewing Thiomers from Chitosan and Hyaluronic Acid

Thiomers (or thiolated polymers) have broken through as avant-garde approaches in anticancer therapy. Their distinguished reactivity and properties, closely linked to their final applications, justify the extensive research conducted on their preparation and use as smart drug-delivery systems (DDSs). Multiple studies have demonstrated that thiomer-rich nanoformulations can overcome major drawbacks found when administering diverse active pharmaceutical ingredients (APIs), especially in cancer therapy. This work focuses on providing a complete and concise review of the synthetic tools available to thiolate cationic and anionic polymers, in particular chitosan (CTS) and hyaluronic acid (HA), respectively, drawing attention to the most successful procedures. Their chemical reactivity and most relevant properties regarding their use in anticancer formulations are also discussed. In addition, a variety of NP formation procedures are outlined, as well as their use in cancer therapy, particularly for taxanes and siRNA. It is expected that the current work could clarify the main synthetic strategies available, with their scope and drawbacks, as well as provide some insight into thiomer chemistry. Therefore, this review can inspire new research strategies in the development of efficient formulations for the treatment of cancer.

Significant biopolymers and their applications in buccal mediated drug delivery

Considerable research exercises have been directed towards the development of efficient and safe drug delivery systems. Various materials are used in different pharmaceutical formulations for the development of efficient drug delivery systems in the treatment of disease. Biopolymers are a choice of research as an excipient delivery system due to their biodegradability, low toxicity, safe, stable, and renewable nature. Biopolymers are naturally occurring polymers or polymer matrix composites, that are extracted from animals, bacteria, fungi, and plants. Cellulose, starches are carbohydrate-based polymers, and wool, silk, gelatin, and collagen are protein-based biopolymers. Biopolymers are obtained from various sources but biopolymers, that belong to the carbohydrate origin, have been found very promising in drug delivery through various routes. The review mainly focuses on the biopolymers currently in use for buccal-mediated pharmaceutical drug delivery systems because the buccal route is an efficient drug delivery system that allows direct systemic circulation of drugs. It also prevents the hydrolysis of the drug molecule in the gastrointestinal tract and thus increases the bioavailability of the drug. The present review discusses the overview of other drug delivery routes, challenges with conventional drug delivery systems, pharmaceutical applications of some biopolymers used in buccal drug delivery systems, that are published recently, currently in use, or used over the past decade.

An overview of chitosan and its application in infectious diseases

Infectious diseases, such as the coronavirus disease-19, SARS virus, Ebola virus, and AIDS, threaten the health of human beings globally. New viruses, drug-resistant bacteria, and fungi continue to challenge the human efficacious drug bank. Researchers have developed a variety of new antiviral and antibacterial drugs in response to the infectious disease crisis. Meanwhile, the development of functional materials has also improved therapeutic outcomes. As a natural material, chitosan possesses good biocompatibility, bioactivity, and biosafety. It has been proven that the cooperation between chitosan and traditional medicine greatly improves the ability of anti-infection. This review summarized the application and design considerations of chitosan-composed systems for the treatment of infectious diseases, looking forward to providing the idea of infectious disease therapy.

Efficacy of topotecan nanoparticles for intravitreal chemotherapy of retinoblastoma

Retinoblastoma (Rb) is the most common intraocular malignancy in children that accounts for approximately 4% of all pediatric malignancies. Since chemotherapy is a widely practiced treatment for Rb, there is a growing interest in developing new and effective drugs to overcome systemic and local side effects of chemotherapy to improve the quality of life and increase the chances of survival. This study sought to fabricate thiolated chitosan nanoparticles containing topotecan (TPH-TCs-NPs) with a view of enhancing drug loading and release control. This research was also designed to assess the ability of TPH-TCs-NPs to improve cell association, increase treatment efficacy in retinoblastoma cells and xenograft-rat-model of retinoblastoma, and overcome current topotecan hydrochloride (TPH) intravitreal administration challenges, including stability loss and poor cellular uptake. Modified ionic gelation method was optimized to fabricate TPH-TCs-NPs and TPH-TMC-NPs (N-trimethyl chitosan nanoparticles containing TPH). We characterized the NPs and quantified topotecan loading and release against a free TPH standard. The efficacy of TPH-NPs was quantified in human retinoblastoma cells (Y79) by XTT and flow cytometry measurement. In addition, Y79 cells were injected intravitreally in both eyes of immunodeficient wistar albino rats to create a xenograft-rat-model to compare the antitumor effectiveness of TPH-NPs and TPH by intravitreal administration. TPH-NPs complexation was confirmed by EDX, FTIR, and DSC techniques. TPH-TCs-NPs and TPH-TMC-NPs had high encapsulation efficiency (85.23 ± 2 and 73.34 ± 2% respectively). TPH-TCs-NPs showed a mean diameter, polidispersity index, and zeta potential of 25±2 nm, 0.21 ± 0.03 and +12 ± 2 mV, respectively. As a function of dose, TCs and TMC NPs were more efficacious than free topotecan (IC50s 53.17 and 85.88 nM, relative to 138.30 nM respectively, P = 0.012). Kruskal-Wallis test showed a statistically significant difference between the groups. Additionally, a significant difference between the tumor control and TPH-TCs-NPs treated group in xenograft-rat-model ( Range of P-value: 0.026 to 0.035) was shown by Bonferroni post hoc test. The current investigation demonstrated enhanced efficacy and association of TPH-TCs-NPs relative to free TPH in retinoblastoma cells and tumor in vitro and in vivo.

The progress on sulfhydryl modified polymers with regard to synthesis, characterization and mucoadhesion

The concepts of mucoadhesion and mucoadhesive polymers were introduced in the 20th century, leading to several advantages. These included enhanced drug absorption and extended residence at specific site of action. Polymeric excipients underwent chemical modification with sulfhydryl groups on the polymeric backbone so as to improve mucoadhesive features as well as potential. This modification resulted in compounds mimicking the nature of secreted mucus glycoproteins. Thus, these thiol group-bearing excipients presented the ability to attach covalently to the mucosa by the disulfide bonding. Nevertheless, the first generation of these thiol-modified polymers, named thiomers, presented disadvantages such as low stability in aqueous media and/or the high susceptibility towards oxidation along with the drawback of low sufficient reactive functional moieties on the polymeric backbone at lower pH. Therefore, in the 21st century, a second generation of preactivated or S-protected polymers with protected thiol moieties were developed, as well as a third generation of thiomers, solving some of the previously described problems. This review article aimed to highlight the progess on a potent sulfhydryl modification during the last decades and the posterior characterization and in vitro/ex vivo/in vivo mucoadhesiveness.

An Update on Pharmaceutical Strategies for Oral Delivery of Therapeutic Peptides and Proteins in Adults and Pediatrics

While each route of therapeutic drug delivery has its own advantages and limitations, oral delivery is often favored because it offers convenient painless administration, sustained delivery, prolonged shelf life, and often lower manufacturing cost. Its limitations include mucus and epithelial cell barriers in the gastrointestinal (GI) tract that can block access of larger molecules including Therapeutic protein or peptide-based drugs (TPPs), resulting in reduced bioavailability. This review describes these barriers and discusses different strategies used to modify TPPs to enhance their oral bioavailability and/or to increase their absorption. Some seek to stabilize the TTPs to prevent their degradation by proteolytic enzymes in the GI tract by administering them together with protease inhibitors, while others modify TPPs with mucoadhesive polymers like polyethylene glycol (PEG) to allow them to interact with the mucus layer, thereby delaying their clearance. The further barrier provided by the epithelial cell membrane can be overcome by the addition of a cell-penetrating peptide (CPP) and the use of a carrier molecule such as a liposome, microsphere, or nanosphere to transport the TPP-CPP chimera. Enteric coatings have also been used to help TPPs reach the small intestine. Key efficacious TPP formulations that have been approved for clinical use will be discussed.

A review on chitosan and its development as pulmonary particulate anti-infective and anti-cancer drug carriers

Chitosan, as a biodegradable and biocompatible polymer, is characterized by anti-microbial and anti-cancer properties. It lately has received a widespread interest for use as the pulmonary particulate backbone materials of drug carrier for the treatment of infectious disease and cancer. The success of chitosan as pulmonary particulate drug carrier is a critical interplay of their mucoadhesive, permeation enhancement and site/cell-specific attributes. In the case of nanocarriers, various microencapsulation and micro-nano blending systems have been devised to equip them with an appropriate aerodynamic character to enable efficient pulmonary aerosolization and inhalation. The late COVID-19 infection is met with acute respiratory distress syndrome and cancer. Chitosan and its derivatives are found useful in combating HCoV and cancer as a function of their molecular weight, substituent type and its degree of substitution. The interest in chitosan is expected to rise in the next decade from the perspectives of drug delivery in combination with its therapeutic performance.

Thiolation of Biopolymers for Developing Drug Delivery Systems with Enhanced Mechanical and Mucoadhesive Properties: A Review

Biopolymers are extensively used for developing drug delivery systems as they are easily available, economical, readily modified, nontoxic, biodegradable and biocompatible. Thiolation is a well reported approach for enhancing mucoadhesive and mechanical properties of polymers. In the present review article, for the modification of biopolymers different thiolation methods and evaluation/characterization techniques have been discussed in detail. Reported literature on thiolated biopolymers with enhanced mechanical and mucoadhesive properties has been presented conspicuously in text as well as in tabular form. Patents filed by researchers on thiolated polymers have also been presented. In conclusion, thiolation is an easily reproducible and efficient method for customization of mucoadhesive and mechanical properties of biopolymers for drug delivery applications.

Slow-Release and Nontoxic Pickering Emulsion Platform for Antimicrobial Peptide

The resistance in microorganisms against many conventional antibiotics has become a serious global health problem. However, antibacterial drug delivery materials are still limited in toxicity, short efficacy and reducing inflammation. The novel and natural Pickering emulsions stabilized by antimicrobial peptide nanoparticles were tested as promising platforms to control bacterial resistance development. The parasin I interacted or conjugated with lecithin or chitosan and formed nanoparticles encapsulated by Pickering emulsion. The protonation and deprotonation of amino groups in chitosan and parasin I resulted in nanoparticles in different aggregate states and changed emulsion stability. Moreover, the Pickering emulsion could induce severe bacterial agglomeration on both Gram-positive and Gram-negative bacteria than parasin I through the membrane disintegration mechanism. Furthermore, the Pickering emulsion could alleviate the cytotoxicity of human liver cells and hemolytic activity in rat blood cells. In combination with the lack of acute cytotoxicity in Kunming mice and milder, more effective anti-inflammatory effect in peritonitis demonstrated for these Pickering emulsions, especially chitosan peptide-embedded nanoparticles Pickering emulsion, a potential role in combating multidrug resistant bacteria in biomedical applications.

Oral delivery and enhanced efficacy of antimonal drug through macrophage-guided multifunctional nanocargoes against visceral Leishmaniasis

The present study aimed on the site specific delivery and enhanced in-vivo efficacy of antimonial drugs against the visceral leishmaniasis via macrophage targeted mannose anchored thiomer based nanoparticles. Mannose anchored thiolated nanoformulation [M-(CS-g-PEI)-TGA] was developed and evaluated in terms particle size, zeta-potential and entrapment efficacy. The TEM and EDX analysis was carried out to evaluate the morphology and successful entrapment of antimonial drug. Mucodhesion, permeation enhancement, oral pharmacokinetics, and in-vivo anti-leishmanial activity were carried out. The M-(CS-g-PEI)-TGA were found to be spherical having particle size of 287 ± 20 nm. Ex-vivo permeation indicated a 7.39-fold enhanced permeation of Meglumine Antimoniate with M-(CS-g-PEI)-TGA across Caco-2 cells compared to the Glucantime. Evaluation of in-vitro reduction in the parasitic burden via flow cytometric analysis indicated a 5.7-fold lower IC₅₀ for M-(CS-g-PEI)-TGA compared to Glucantime. A 6.1-fold improvement in the oral bioavailability and 5.2-fold reduced parasitic burden in the L. donovani infected BALB/c mice model was observed with M-(CS-g-PEI)-TGA compared to Glucantime. The results encouraged the concept of M-(CS-g-PEI)-TGA nanoformulations as a promising strategy for oral therapy against visceral leishmaniasis.

Curcumin Delivery Mediated by Bio-Based Nanoparticles: A Review

Todays, nano-pharmaceutics is emerging as an important field of science to develop and improve efficacy of different drugs. Although nutraceuticals are currently being utilized in the prevention and treatment of various chronic diseases such as cancers, a number of them have displayed issues associated with their solubility, bioavailability, and bio-degradability. In the present review, we focus on curcumin, an important and widely used polyphenol, with diverse pharmacological activities such as anti-inflammatory, anti-carcinogenic, anti-viral, etc. Notwithstanding, it also exhibits poor solubility and bioavailability that may compromise its clinical application to a great extent. Therefore, the manipulation and encapsulation of curcumin into a nanocarrier formulation can overcome these major drawbacks and potentially may lead to a far superior therapeutic efficacy. Among different types of nanocarriers, biological and biopolymer carriers have attracted a significant attention due to their pleiotropic features. Thus, in the present review, the potential protective and therapeutic applications of curcumin, as well as different types of bio-nanocarriers, which can be used to deliver curcumin effectively to the different target sites will be discussed.

Thiolated polymers: Bioinspired polymers utilizing one of the most important bridging structures in nature

Thiolated polymers designated "thiomers" are obtained by covalent attachment of thiol functionalities on the polymeric backbone of polymers. In 1998 these polymers were first described as mucoadhesive and in situ gelling compounds forming disulfide bonds with cysteine-rich substructures of mucus glycoproteins and crosslinking through inter- and intrachain disulfide bond formation. In the following, it was shown that thiomers are able to form disulfides with keratins and membrane-associated proteins exhibiting also cysteine-rich substructures. Furthermore, permeation enhancing, enzyme inhibiting and efflux pump inhibiting properties were demonstrated. Because of these capabilities thiomers are promising tools for drug delivery guaranteeing a strongly prolonged residence time as well as sustained release on mucosal membranes. Apart from that, thiomers are used as drugs per se. In particular, for treatment of dry eye syndrome various thiolated polymers are in development and a first product has already reached the market. Within this review an overview about the thiomer-technology and its potential for different applications is provided discussing especially the outcome of studies in non-rodent animal models and that of numerous clinical trials. Moreover, an overview on product developments is given.

Evaluation of the mucoadhesive strengths of Abelmoschus esculentus and Irvingia gabonensis gums for possible application in veterinary vaccine delivery: the effect of extraction methods

This study evaluates the effects of different gum extraction methods on the mucoadhesive strengths of Abelmoschus esculentus (AE) and Irvingia gabonensis (IG) gums and the release of vaccine antigen in vaccine-gum formulations. AE and IG gums were extracted employing previously documented methods with acetone or sodium chloride (NaCl) and either oven-dried or freeze-dried. Gum extracts were analyzed for mucoadhesive strengths using a modified rotational cylinder method on animal mucosa. The time taken to detach from the mucosa was taken as the Peak Adhesion Time (PAT). The gum extracts were charged with Peste des petits ruminant vaccine and the antigen release was evaluated using agar gel immunodiffusion technique. The means of the PATS were analyzed using Mann-whitney t-test at p < .05. The NaCl extracted and freeze-dried IG gum showed sustained mean PATs of 1766 ± 73 s; 2116 ± 101 s; 7044 ± 117 s, while the oven-dried IG gum and both AE gums showed short-lived average PATs. Vaccine-gum formulations of IG at ratios 2:1, 1:1 & 1:2 had strong positive reactions while only that of AE at 2:1 showed a strong positive reaction. This study shows that NaCl extracted and freeze-dried IG gum has immunomodulatory potential for mucoadhesive vaccine delivery in ruminants.

Development and Evaluation of Optimized Thiolated Chitosan Proniosomal Gel Containing Duloxetine for Intranasal Delivery

Proniosomes offer excellent potential for improved drug delivery, through versatile routes, by overcoming the permeation barriers faced by several drugs. The study was aimed to develop a thiomer gel containing duloxetine proniosomes for the intranasal delivery, improving its bioavailability and brain delivery through olfactory system. Duloxetine-loaded proniosomes were optimized through Design-Expert Software, prepared by coacervation phase separation method and then characterized in vitro for different vesicle features, and permeation enhancement potential using various techniques. The formulation F2, out of all the trials, fulfilled the maximum requisite of highest entrapment efficiency (76.21 ± 1.24%) and minimum vesicle size (223.91 ± 11.07 nm). The F2 was embedded in thiolated chitosan gel rendering it mucoadhesive and further characterized. The in vitro release showed a sustained drug release from the mucoadhesive proniosomal gel with only 54% drug release as compared to that of 71% from proniosome over 8 h, following Higuchi drug release model. Ex vivo permeation studies showed the enhancement ratio for the mucoadhesive proniosomal gel to be 1.86-fold greater than proniosomes, indicating a significant improvement in transmucosal permeation. The results suggest that incorporation of proniosomes into thiolated gel can significantly improve its mucoadhesion and retention time in the nasal cavity for providing a sustained drug release. Thus, gel formulation could be considered as a promising approach for efficient intranasal drug delivery of duloxetine. Graphical Abstract.

Nasal delivery of donepezil HCl-loaded hydrogels for the treatment of Alzheimer's disease

This study aims to prepare, characterize and evaluate the pharmacokinetics of liposomal donepezil HCl (LDH) dispersed into thiolated chitosan hydrogel (TCH) in rabbits. Various hydrogels including TCH were prepared, and after characterization, TCH was selected for subsequent evaluations, due to the promising results. TCH was then incorporated with LDH prepared by reverse phase evaporation method. The hydrogel was characterized using scanning electron microscope, dialysis membrane technique, and ultra-performance liquid chromatography methods. The optimized resultant was then evaluated in terms of pharmacokinetics in an in vivo environment. The mean size of LDH and drug entrapment efficiency were 438.7 ± 28.3 nm and 62.5% ± 0.6, respectively. The controlled drug release pattern results showed that the half-life of the loaded drug was approximately 3.5 h. Liposomal hydrogel and free liposomes were more stable at 4 °C compared to those in 20 °C. The pharmacokinetics study in the rabbit showed that the optimized hydrogel increased the mean peak drug concentration and area under the curve by 46% and 39%, respectively, through nasal route compared to the oral tablets of DH. Moreover, intranasal delivery of DH through liposomal hydrogel increased the mean brain content of the drug by 107% compared to the oral DH tablets. The results suggested that liposomes dispersed into TCH is a promising device for the nasal delivery of DH and can be considered for the treatment of Alzheimer's disease.

Preparation, intestinal segment stability, and mucoadhesion properties of novel thymopentin-loaded chitosan derivatives coated with poly (n-butyl) cyanoacrylate nanoparticles

Background

In order to develop a promising carrier for the oral delivery of proteins and peptide drugs, a novel bioadhesive nanocarrier of chitosan (CTS) derivatives coated with poly (n-butyl) cyanoacrylate nanoparticles (PBCA-NPs) was prepared in this study.

Methods

Three different thymopentin (TP5)-loaded nanoparticles were prepared in the present study. TP5-PBCA-NPs were developed by modifying an emulsion polymerization method, and CTS and chitosan-glutathione (CG) derivative-coated PBCA nanoparticles were obtained from the electrostatic interactions between CTS or CG with negatively charged PBCA nanoparticles.

Results

The particle sizes of TP5-PBCA-NPs, TP5-CTS-PBCA-NPs, and TP5-CG-PBCA-NPs were 212.3±6.9, 274.6±8.2, and 310.4±7.5 nm, respectively, while the respective zeta potentials were -22.6±0.76, 23.3±1.2, and 34.6±1.6 mV with encapsulation efficiencies of 79.37%±2.15%, 74.21%±2.13%, and 72.65%±1.48%, respectively. An everted intestinal ring method indicated that drug stability was remarkably improved after incorporation into the nanoparticles, especially the CG-coated nanoparticles. The mucus layer retention rates for CTS- and CG-coated nanoparticles were 1.43 and 1.83 times that of the uncoated nanoparticles, respectively, using ex vivo mucosa. The in vivo mucoadhesion study illustrated that the transfer of uncoated PBCA-NPs from the stomach to the intestine was faster than that of CTS-PBCA-NPs and CG-PBCA-NPs, while the CG-PBCA-NPs presented the best intestinal retentive characteristic.

Conclusion

In summary, this study demonstrated the feasibility and benefit of orally delivering peptide drugs using novel CTS derivative-coated nanoparticles with optimal stability and bioadhesive properties.

Mannosylated thiolated paromomycin-loaded PLGA nanoparticles for the oral therapy of visceral leishmaniasis

AIM

The present study evaluates the efficacy of paromomycin (PM)-loaded mannosylated thiomeric nanoparticles for the targeted delivery to pathological organs for the oral therapy of visceral leishmaniasis.

MATERIALS & METHODS

Mannosylated thiolated chitosan (MTC)-coated PM-loaded PLGA nanoparticles (MTC-PLGA-PM) were synthesized and evaluated for morphology, drug release, permeation enhancing and antileishmanial potential.

RESULTS

MTC-PLGA-PM were spherical in shape with a size of 391.24 ± 6.91 nm and an encapsulation efficiency of 67.16 ± 14%. Ex vivo permeation indicated 12.73-fold higher permeation of PM with MTC-PLGA-PM against the free PM. Flow cytometry indicated enhanced macrophage uptake and parasite killing in Leishmania donovani infected macrophage model. In vitro antileishmanial activity indicated 36-fold lower IC₅₀ for MTC-PLGA-PM as compared with PM. The in vivo studies indicated 3.6-fold reduced parasitic burden in the L. donovani infected BALB/c mice model.

CONCLUSION

The results encouraged the concept of MTC-PLGA-PM nanoparticles as promising strategy for visceral leishmaniasis.

Needle-Free Immunization with Chitosan-Based Systems

Despite successful use, needle-based immunizations have several issues such as the risk of injuries and infections from the reuse of needles and syringes and the low patient compliance due to pain and fear of needles during immunization. In contrast, needle-free immunizations have several advantages including ease of administration, high level of patient compliance and the possibility of mass vaccination. Thus, there is an increasing interest on developing effective needle-free immunizations via cutaneous and mucosal approaches. Here, we discuss several methods of needle-free immunizations and provide insights into promising use of chitosan systems for successful immunization.

Anhydrous thiomers: Strategy for enhanced mucoadhesion

AIM

The aim of this study was to evaluate the impact of the absence of water during the synthesis of thiolated poly(acrylic acid) (PAA) on its mucoadhesive properties. Previously, thiolation of hydrophilic polymers was performed in aqueous media, where (poly)acrylates undergo a conformational transition to form an entangled network of polymer chains stabilized by neutralization. The impact of chain entanglement, porosity and degree of functionalization of anhydrous precipitated polymers on their mucoadhesive characteristics were therefore evaluated in comparison to the equivalent products synthesized in water and dried by lyophilization.

METHODS

Anhydrous synthesis and purification procedures were designed for the thiolation and entire preactivation of PAA by means of immobilization of l-cysteine (PAA-Cys) and 2-mercaptonicotinic acid (PAA-Cys-MNA), respectively. The obtained conjugates were characterized chemically and for their particle size. Differences in mucoadhesive properties were determined by means of the residence time as well as tensile strength of polymer test disks on porcine small intestinal mucosa.

RESULTS

Anhydrous products revealed a 4.2-fold higher amount of immobilized free thiol moieties for PAA-Cys and a 3.1-fold higher quantity of 2-mercaptonicotinic acid for PAA-Cys-MNA. The impact of particle size of anhydrous products on their mucoadhesive properties was negligible. In comparison to the corresponding aqueous products a 2.5-fold increase in residence time for PAA-Cys and 21.2-fold increase for PAA-Cys-MNA was achieved and in agreement with these results, the improvement in the total work of adhesion was 2.9-fold for PAA-Cys and 5.1-fold for PAA-Cys-MNA.

CONCLUSION

According to these findings, anhydrous synthesis conditions seem to be a promising tool for improved modification rates and moreover enhanced mucoadhesive properties of hydrophilic polymers.