Improved gel-protected bilayers

A reusable device for electrochemical applications of hydrogel supported black lipid membranes

Black lipid membranes (BLMs) are significant in studies of membrane transport, incorporated proteins/ion transporters, and hence in construction of biosensor devices. Although BLMs provide an accepted mimic of cellular membranes, they are inherently fragile. Techniques are developed to stabilize them, such as hydrogel supports. In this paper, we present a reusable device for studies on hydrogel supported (hs) BLMs. These are formed across an ethylene tetrafluoroethylene (ETFE) aperture array supported by the hydrogel, which is during in situ polymerization covalently "sandwiched" between the ETFE substrate and a gold electrode microchip, thus allowing direct electrochemical studies with the integrated working electrodes. Using electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy and contact angle measurements, we demonstrate the optimized chemical modifications of the gold electrode microchips and plasma modification of the ETFE aperture arrays facilitating covalent "sandwiching" of the hydrogel. Both fluorescence microscopy and EIS were used to demonstrate the induced spontaneous thinning of a deposited lipid solution, leading to formation of stabilized hsBLMs on average in 10 min. The determined specific membrane capacitance and resistance were shown to vary in the range 0.31-0.49 μF/cm(2) and 45-65 kΩ cm(2), respectively, corresponding to partially solvent containing BLMs with an average life time of 60-80 min. The characterized hsBLM formation and devised equivalent circuit models lead to a schematic model to illustrate lipid molecule distribution in hydrogel-supported apertures. The functionality of stabilized hsBLMs and detection sensitivity of the platform were verified by monitoring the effect of the ion transporter valinomycin.

Synthetic biomimetic membranes and their sensor applications

Synthetic biomimetic membranes provide biological environments to membrane proteins. By exploiting the central roles of biological membranes, it is possible to devise biosensors, drug delivery systems, and nanocontainers using a biomimetic membrane system integrated with functional proteins. Biomimetic membranes can be created with synthetic lipids or block copolymers. These amphiphilic lipids and polymers self-assemble in an aqueous solution either into planar membranes or into vesicles. Using various techniques developed to date, both planar membranes and vesicles can provide versatile and robust platforms for a number of applications. In particular, biomimetic membranes with modified lipids or functional proteins are promising platforms for biosensors. We review recent technologies used to create synthetic biomimetic membranes and their engineered sensors applications.

Biomimetic membrane arrays on cast hydrogel supports

Lipid bilayers are intrinsically fragile and require mechanical support in technical applications based on biomimetic membranes. Tethering the lipid bilayer membranes to solid substrates, either directly through covalent or ionic substrate-lipid links or indirectly on substrate-supported cushions, provides mechanical support but at the cost of small molecule transport through the membrane-support sandwich. To stabilize biomimetic membranes while allowing transport through a membrane-support sandwich, we have investigated the feasibility of using an ethylene tetrafluoroethylene (ETFE)/hydrogel sandwich as the support. The sandwich is realized as a perforated surface-treated ETFE film onto which a hydrogel composite support structure is cast. We report a simple method to prepare arrays of lipid bilayer membranes with low intrinsic electrical conductance on the highly permeable, self-supporting ETFE/hydrogel sandwiches. We demonstrate how the ETFE/hydrogel sandwich support promotes rapid self-thinning of lipid bilayers suitable for hosting membrane-spanning proteins.

Stochastic nanopore sensors for the detection of terrorist agents: current status and challenges

Nanopore stochastic sensor works by monitoring the ionic current modulations induced by the passage of analytes of interest through a single pore, which can be obtained from a biological ion channel by self-assembly or artificially fabricated in a solid-state membrane. In this minireview, we overview the use of biological nanopores and artificial nanopores for the detection of terrorist agents including explosives, organophosphorus nerve agents, nitrogen mustards, organoarsenic compounds, toxins, and viruses. We also discuss the current challenge in the development of deployable nanopore sensors for real-world applications.

Applications of biological pores in nanomedicine, sensing, and nanoelectronics

Biological protein pores and pore-forming peptides can generate a pathway for the flux of ions and other charged or polar molecules across cellular membranes. In nature, these nanopores have diverse and essential functions that range from maintaining cell homeostasis and participating in cell signaling to activating or killing cells. The combination of the nanoscale dimensions and sophisticated - often regulated - functionality of these biological pores make them particularly attractive for the growing field of nanobiotechnology. Applications range from single-molecule sensing to drug delivery and targeted killing of malignant cells. Potential future applications may include the use of nanopores for single strand DNA sequencing and for generating bio-inspired, and possibly, biocompatible visual detection systems and batteries. This article reviews the current state of applications of pore-forming peptides and proteins in nanomedicine, sensing, and nanoelectronics.

Stable insulating tethered bilayer lipid membranes

Tethered bilayer lipid membranes have been shown to be an excellent model system for biological membranes. Coupling of a membrane to a solid supports creates a stable system that is accessible for various surface analytical tools. Good electrical sealing properties also enable the use of the membranes in practical sensing applications. The authors have shown that tethered membranes have extended lifetimes up to several months. Air-stability of the bilayer can be achieved by coating the membrane with a hydrogel. The structure of a monolayer and its stability under applied dc potentials have been investigated by neutron scattering.

Black lipid membranes stabilized through substrate conjugation to a hydrogel

Recent research in stabilizing lipid bilayer membranes has been directed toward tethering the membrane to a solid surface or contacting the membrane with a solid support such as a gel. It is also known that the solvent annulus plays an important role in lipid bilayer stability. In this work, the authors set out to stabilize the solvent annulus. Glass substrates with approximately 500 mum apertures were functionalized with 3-methacryloxypropyltrimethoxysilane to allow cross-linking with a surrounding polyethyleneglycol dimethacrylate hydrogel. The hydrogel makes a conformal mold around both the lipid bilayer and the solvent reservoir. Since the hydrogel is covalently conjugated with the glass substrate via vinyl groups, the solvent annulus is prevented from leaving the aperture boundary. Measurements of a membrane created with this approach showed that it remained a stable bilayer with a resistance greater than 1 GOmega for 12 days. Measurements of the ion channel gramicidin A, alpha-hemolysin, and alamethicin incorporated into these membranes showed the same conductance behavior as conventional membranes.

Air-exposure technique for the formation of artificial lipid bilayers in microsystems

To develop a reliable method for on-chip bilayer lipid membrane (BLM) formation, which could be employed for use in a biosensor array platform, a polymer microfluidic device has been constructed, and the formation of suspended BLMs within it has been investigated. A simple, yet reproducible BLM formation protocol has been developed, in which a brief air-exposure period is employed to induce the rapid thinning of an initially thick lipid-solvent layer. The technique is rapid, reproducible, and amenable to the simple injection of proteins or analytes, as well as to buffer exchange on both sides of the membrane. Scaling up the technique for use in an array platform is also straightforward, the simultaneous formation of three individually addressable BLMs being demonstrated.

Construction of hybrid bilayer membrane (HBM) Biochips and characterization of the cooperative binding between cytochrome-c and HBM

We constructed multi-channel hybrid bilayer membrane (HBM) biochips and characterized them by surface plasmon resonance imaging. Each channel in the biochip was prepared using vesicles with different proportions of negative, neutral, and positive lipids. The HBM surfaces were tested by interaction with two globular proteins that recognize surfaces covered with opposite charges. Spots modified with the same HBM show responses within a relative standard deviation of 10% or smaller. These devices were also used to study in detail the interaction between cytochrome-c (cyt-c) and HBMs. Cooperative binding between cyt-c and negative HBMs was demonstrated. Using an adaptation of the Hill model, we calculated a Hill coefficient of 5 and a 10-fold increase in the binding constant with the increase in cyt-c concentration. We propose that this treatment can be used to evaluate the cooperative binding of surface proteins to membranes.

A storable encapsulated bilayer chip containing a single protein nanopore

A robust, portable chip containing a single protein nanopore would be a significant development in the practical application of stochastic sensing technology. Here, we describe a chip in which a single alpha-hemolysin (alphaHL) pore in a planar phospholipid bilayer is sandwiched between two layers of agarose gel. These encapsulated nanopore chips remain functional after storage for weeks. The detection of the second messenger inositol 1,4,5-trisphosphate (IP3) was demonstrated with a chip containing a genetically engineered alphaHL pore as the sensor element.

Stochastic sensing on a modular chip containing a single-ion channel

Engineered protein channels have many potential applications in biosensing at the single-molecule level. A future generation of biosensor could be an array of target-specific ion channels, where each protein pore acts as a sensor element. An important step toward this goal is to create a portable, durable, single-protein channel-integrated chip device. Here we report a versatile, modular chip that contains a single-ion channel for single-molecular biosensing. The core of the device is a long-lived lipid membrane that has been sandwiched between two air-insulated agarose layers which gel in situ. A single-protein pore embedded in the membrane serves as the sensor element. The modular device is highly portable, allowing a single-ion channel to continuously function following detachment of the chip from the instrument and independent transportation of the device. The chip also exhibits high durability, which is evidenced from long-duration continuous observation of single-channel dynamics. Once engineered protein pores are installed, the chip becomes a robust stochastic sensor for real-time targeting such as detection of the second messenger IP3. This pluggable biochip could be incorporated with many applicable devices, such as a microfluidic system, and be made into a microarray for both biomedical detection and membrane protein research.

Luminescence dynamics of terbium monodipicolinate in ethyl ammonium nitrate

Energy level dynamics are experimentally examined for terbium monodipicolinate dissolved in ethyl ammonium nitrate (EAN). The luminescence lifetime, the luminescence risetime, and the absorption spectrum of terbium monodipicolinate in EAN are measured. The risetime of luminescence in terbium dipicolinate is experimentally shown to be nonzero and measurable. A dynamic model is presented that describes the evolution of terbium dipicolinate luminescence in EAN. The long risetime in the model is caused by a resonance between the 5E6 state in the terbium cation and the lowest triplet state (T1) in the dipicolinate anion. Bacterial endospore components dissolved in EAN are used to check the time resolution of the experimental apparatus. EAN is discussed partly because it is a room-temperature ionic liquid (RTIL), which is a class of solvents that may be useful for detecting bacterial endospores in the atmosphere.

New Approaches to Lipid Bilayer Fabrication: Microfluidic Solvent Extraction and Hydrogel Encapsulation

Membrane channel proteins play crucial roles in governing the transport of material and energy across every cellular membrane. Accordingly, they are the subjects of interest for science and medicine as well as major targets of drug discovery efforts. Recent work has also shown their potential as highly rapid and sensitive single molecule sensors. However, techniques conventionally used to measure the electrical transport through these proteins can be problematic to form and are extremely fragile, limiting the range and scope of possible studies. We have developed two new technologies which alleviate these shortcomings: in situ encapsulation of lipid membranes in hydrogels and automated microfluidic formation. The hydrogel encapsulated membranes are mechanically robust and long-lived as a result of the intimate contact between the hydrogel and the membrane, enabling measurements of single channel currents for a week or longer. The automated microfluidic formation apparatus enables the creation and manipulation of lipid membranes and the incorporation and measurement of channel proteins in these membranes through an entirely computer controlled process. We are working to apply these technologies toward DNA sequencing, drug discovery, and single molecule biophysics.

Hydrogel-Encapsulated Lipid Membranes

We have encapsulated free-standing planar lipid membranes in a polymer hydrogel via in situ photopolymerization. These encapsulated membranes were measured to last at least 5 days and provided a stable environment for single-molecule measurements of incorporated alpha-hemolysin channel proteins. The translocation of single-stranded DNA through alpha-hemolysin incorporated into these encapsulated membranes is slowed over 100 times relative to that of the gel-free state. These stabilized membranes, therefore, have application to the single-molecule analysis of DNA as well as broader application to biomolecular sensors, membrane protein biophysical studies, and drug discovery.

Reconstitution of Nicotinic Acetylcholine Receptors into Gel-Protected Lipid Membranes

We report the functional reconstitution of nicotinic acetylcholine receptors into gel-protected bilayer lipid membranes using two different methods. In the first case, reconstitution was achieved by direct membrane formation from an emulsion of glycerol monooleate, hexane, and a membrane receptor extract. In the second case, incorporation was achieved via the fusion of vesicles from a preparation of membrane-bound receptors into preformed membranes after diffusion through the protective front gel layer. Measurement of the dc conductivity of the membranes in the presence of either acetylcholine or alpha-bungarotoxin was used to test for the functional activity of incorporated receptors.

A functional assay for paralytic shellfish toxins that uses recombinant sodium channels

Saxitoxin (STX) and its derivatives are highly toxic natural compounds produced by dinoflagellates commonly present in marine phytoplankton. During algal blooms ("red tides"), shellfish accumulate saxitoxins leading to paralytic shellfish poisoning (PSP) in human consumers. PSP is a consequence of the high-affinity block of voltage-dependent Na channels in neuronal and muscle cells. PSP poses a significant public health threat and an enormous economic challenge to the shellfish industry worldwide. The standard screening method for marine toxins is the mouse mortality bioassay that is ethically problematic, costly and time-consuming. We report here an alternative, functional assay based on electrical recordings in cultured cells stably expressing a PSP target molecule, the STX-sensitive skeletal muscle Na channel. STX-equivalent concentration in the extracts was calibrated by comparison with purified STX, yielding a highly significant correlation (R=0.95; N=30) between electrophysiological determinations and the values obtained by conventional methods. This simple, economical, and reproducible assay obviates the need to sacrifice millions of animals in mandatory paralytic shellfish toxin screening programs.

Discrete membrane arrays

This review describes various methods for the attachment of phospholipid bilayers to solid supports. The simplest approach involves vesicle unrolling onto a surface that has been previously modified with a continuous self-assembled monolayer (SAM). The choice of a suitable SAM can lead to the formation of attached bilayers that have the desired biomimetic properties and are suitable for studying transmembrane proteins. However, there are intrinsic problems associated with this approach if one is interested in studying ion transport phenomena. In particular, the relatively low resistance values found for such bilayers do not permit studies of single ion channels. For such studies to be carried out the background leakage through the lipid film must be greatly reduced. In an attempt to reduce the problems of leakage we have formed patterned SAMs in which a blocking, hydrophobic, layer covers 90% of the electrode surface. The remaining portion of the surface, which is hydrophilic, supports the formation of a bilayer. This approach has led to an improvement in the quality of the bilayers formed but has still not provided bilayers with sufficiently high specific resistances to study single ion channels. Finally, we describe new approaches based on the formation of bilayers suspended over small apertures. These 'suspended' bilayers are similar in structure to those used in black lipid membrane experiments and give rise to highly blocking bilayer membranes. Unfortunately, this approach requires the use of solvents to create the suspended bilayer and they are relatively fragile.

Detection of complement activity by using a polysaccharide-protected membrane

The complement system of mammalian blood is a nonspecific part of the immune system involved in a number of disease conditions. We report the observation of pore creation caused by its activation in blood applied to the front gel layer of a bilayer membrane formed from dioleoylphosphatidyl choline and protected by a polysaccharide gel. The pores were detected by measuring the DC conductivity between nonblocking Ag/AgCl electrodes. The thickness of the protective gel was approximately 100 µm, and the complement response was seen within 3 min after application of activator. The lifetime of such membranes is limited only by hydrolysis of the phospholipid constituting the membrane. This easily prepared system is suitable for examining the kinetics of complement component interactions with inhibitors.