1
|
Vijayan V, Joseph CG, Taufiq-Yap YH, Gansau JA, Nga JLH, Li Puma G, Chia PW. Mineralization of palm oil mill effluent by advanced oxidation processes: A review on current trends and the way forward. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 342:123099. [PMID: 38070640 DOI: 10.1016/j.envpol.2023.123099] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/16/2023] [Revised: 12/01/2023] [Accepted: 12/02/2023] [Indexed: 12/20/2023]
Abstract
Palm oil mill effluent (POME) is regarded as deleterious to the environment, primarily owing to the substantial volume of waste it produces during palm oil extraction. In terms of contaminant composition, POME surpasses the pollutant content typically found in standard municipal sewage, therefore releasing it without treatment into water bodies would do irreparable damage to the environment. Main palm oil mills are normally located in the proximity of natural rivers in order to take advantage of the cheap and abundant water source. The same rivers are also used as a water source for many villages situated along the river banks. As such, it is imperative to degrade POME before its disposal into the water bodies for obvious reasons. The treatment methods used so far include the biological processes such as open ponding/land application, which consist of aerobic as well as anaerobic ponds, physicochemical treatment including membrane technology, adsorption and coagulation are successful for the mitigation of contaminants. As the above methods require large working area and it takes more time for contaminant degradation, and in consideration of the strict environmental policies as well as palm oil being the most sort of vegetable oil in several countries, numerous researchers have concentrated on the emerging technologies such as advanced oxidation processes (AOPs) to remediate POME. Methods such as the photocatalysis, Fenton process, sonocatalysis, sonophotocatalysis, ozonation have attained special importance for the degradation of POME because of their efficiency in complete mineralization of organic pollutants in situ. This review outlines the AOP technologies currently available for the mineralization of POME with importance given to sonophotocatalysis and ozonation as these treatment process removes the need to transfer the pollutant while possibly degrading the organic matter sufficiently to be used in other industry like fertilizer manufacturing.
Collapse
Affiliation(s)
- Veena Vijayan
- Sonophotochemistry Research Group, Faculty of Science and Natural Resources, Universiti Malaysia Sabah, 88400, Kota Kinabalu, Sabah, Malaysia; Industrial Chemistry Programme, Faculty of Science and Natural Resources, Universiti Malaysia Sabah, 88400, Kota Kinabalu, Sabah, Malaysia.
| | - Collin G Joseph
- Sonophotochemistry Research Group, Faculty of Science and Natural Resources, Universiti Malaysia Sabah, 88400, Kota Kinabalu, Sabah, Malaysia; Industrial Chemistry Programme, Faculty of Science and Natural Resources, Universiti Malaysia Sabah, 88400, Kota Kinabalu, Sabah, Malaysia.
| | - Yun Hin Taufiq-Yap
- Catalysis Science and Technology Research Centre, Faculty of Science, Universiti Putra Malaysia, 43400, UPM Serdang, Malaysia; Institute of Plantation Studies, Universiti Putra Malaysia, 43400, UPM Serdang, Selangor, Malaysia.
| | - Jualang Azlan Gansau
- Biotechnology Programme, Faculty of Science and Natural Resources, Universiti Malaysia Sabah, 88400, Kota Kinabalu, Sabah, Malaysia.
| | - Janice L H Nga
- Sonophotochemistry Research Group, Faculty of Science and Natural Resources, Universiti Malaysia Sabah, 88400, Kota Kinabalu, Sabah, Malaysia; Planning and Development Economics Programme, Faculty of Business, Economics and Accountancy, Universiti Malaysia Sabah, 88400, Kota Kinabalu, Sabah, Malaysia.
| | - Gianluca Li Puma
- Environmental Nanocatalysis & Photoreaction Engineering, Department of Chemical Engineering, Loughborough University, Loughborough, LE11 3TU, UK2, UK.
| | - Poh Wai Chia
- Eco-Innovation Research Interest Group, Faculty of Science and Marine Environment, Universiti Malaysia Terengganu, Kuala Nerus, Terengganu, Malaysia.
| |
Collapse
|
2
|
Yung YL, Lakshmanan S, Chu CM, Kumaresan S, Tham HJ. Simultaneous mitigation of 3-monochloropropane 1,2 diol ester and glycidyl ester in edible oils: a review. Food Addit Contam Part A Chem Anal Control Expo Risk Assess 2023; 40:1164-1182. [PMID: 37549246 DOI: 10.1080/19440049.2023.2235608] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2023] [Revised: 07/07/2023] [Accepted: 07/08/2023] [Indexed: 08/09/2023]
Abstract
The rising concern about the presence of 3-monochloropropane 1,2 diol ester (3-MCPDE) and glycidyl ester (GE) in food has prompted much research to be conducted. Some process modifications and the use of specific chemicals have been employed to mitigate both 3-MCPDE and GE. Alkalisation using NaOH, KOH, alkali metals or alkaline earth metals and post sparging with steam or ethanol and short path distillation have shown simultaneous mitigation of 51-91% in 3-MCPDE and of 13-99% in GE, both contaminants achieved below 1000 µg/kg. Some of the mitigation methods have resulted in undesirable deterioration in other parameters of the refined oil. When the processed oil is used in food processing, it results in changes to 3-MCPDE and GE. Repeated deep frying above 170 °C in the presence of NaCl and baking at 200 °C with flavouring (dried garlic and onion), resulted in increased 3-MCPDE. Repeated frying in the presence of antioxidants (TBHQ, rosemary and phenolics) decreased 3-MCPDE in processed food. The GE content in foods tends to decline with time, indicating instability of GE's epoxide ring.
Collapse
Affiliation(s)
- Yen Li Yung
- Chemical Engineering Programme, Faculty of Engineering, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia
- Research & Development Department, IOI Edible Oils Sdn. Bhd, off Jalan Batu Sapi, Sandakan, Sabah, Malaysia
| | - Shyam Lakshmanan
- Research & Development Department, IOI Edible Oils Sdn. Bhd, off Jalan Batu Sapi, Sandakan, Sabah, Malaysia
| | - Chi Ming Chu
- Chemical Engineering Programme, Faculty of Engineering, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia
| | - Sivakumar Kumaresan
- Chemical Engineering Programme, Faculty of Engineering, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia
| | - Heng Jin Tham
- Chemical Engineering Programme, Faculty of Engineering, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia
| |
Collapse
|
3
|
Pongraktham K, Somnuk K. Continuous double-step acid catalyzed esterification production of sludge palm oil using 3D-printed rotational hydrodynamic cavitation reactor. ULTRASONICS SONOCHEMISTRY 2023; 95:106374. [PMID: 37004412 PMCID: PMC10457588 DOI: 10.1016/j.ultsonch.2023.106374] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2022] [Revised: 03/11/2023] [Accepted: 03/13/2023] [Indexed: 06/19/2023]
Abstract
Sludge palm oil (SPO) with high free fatty acid (FFA) content was processed using a continuous and double-step esterification production process in a rotor-stator-type hydrodynamic cavitation reactor. Three-dimensional printed rotor was made of plastic filament and acted as a major element in minimizing the FFA content in SPO. To evaluate the reduced level of FFAs using both methods, five independent factors were varied: methanol content, sulphuric acid content (H2SO4), hole diameter, hole depth, and rotor speed. The first-step conditions for the esterification process included 60.8 vol% methanol content, 7.2 vol% H2SO4 content, 5.0 mm diameter of the hole, 6.1 mm depth of the hole, and 3000 rpm speed of the rotor. The initial free fatty acid content decreased from 89.16 wt% to 35.00 wt% by the predictive model, while 36.69 wt% FFA level and 94.4 vol% washed first-esterified oil yield were obtained from an actual experiment. In the second-step, 1.0 wt% FFA was achieved under the following conditions: 44.5 vol% methanol content, 3.0 vol% H2SO4 content, 4.6 mm hole diameter, 5.8 mm hole depth, and 3000 rpm rotor speed. The actual experiment produced 0.94 wt% FFA content and 93.9 vol% washed second-esterified oil yield. The entire process required an average electricity of 0.137 kWh/L to reduce the FFA level in the SPO below 1 wt%.
Collapse
Affiliation(s)
- Kritsakon Pongraktham
- Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hat Yai, Songkhla 90110, Thailand
| | - Krit Somnuk
- Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hat Yai, Songkhla 90110, Thailand; Energy Technology Research Center, Faculty of Engineering, Prince of Songkla University, Hat Yai, Songkhla 90110, Thailand.
| |
Collapse
|
4
|
Haruna A, Chong FK, Ho YC, Merican ZMA. Preparation and modification methods of defective titanium dioxide-based nanoparticles for photocatalytic wastewater treatment-a comprehensive review. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:70706-70745. [PMID: 36044146 DOI: 10.1007/s11356-022-22749-8] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/18/2022] [Accepted: 08/22/2022] [Indexed: 06/15/2023]
Abstract
The rapid population growth and industrial expansion worldwide have created serious water contamination concerns. To curb the pollution issue, it has become imperative to use a versatile material for the treatment. Titanium dioxide (TiO2) has been recognized as the most-studied nanoparticle in various fields of science and engineering due to its availability, low cost, efficiency, and other fascinating properties with a wide range of applications in modern technology. Recent studies revealed the photocatalytic activity of the material for the treatment of industrial effluents to promote environmental sustainability. With the wide band gap energy of 3.2 eV, TiO2 can be activated under UV light; thus, many strategies have been proposed to extend its photoabsorption to the visible light region. In what follows, this has generated increasing attention to study its characteristics and structural modifications in different forms for photocatalytic applications. The present review provides an insight into the understanding of the synthesis methods of TiO2, the current progress in the treatment techniques for the degradation of wide environmental pollutants employing modified TiO2 nanoparticles, and the factors affecting its photocatalytic activities. Further, recent developments in using titania for practical applications, the approach for designing novel nanomaterials, and the prospects and opportunities in this exciting area have been discussed.
Collapse
Affiliation(s)
- Abdurrashid Haruna
- Department of Fundamental and Applied Sciences, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, Malaysia.
- Department of Chemistry, Ahmadu Bello University, Zaria, Nigeria.
- Centre of Innovative Nanostructures & Nanodevices (COINN), Institute of Autonomous System, Universiti Teknologi PETRONAS, 32610, Bandar Seri Iskandar, Perak, Malaysia.
| | - Fai-Kait Chong
- Department of Fundamental and Applied Sciences, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, Malaysia
- Centre of Innovative Nanostructures & Nanodevices (COINN), Institute of Autonomous System, Universiti Teknologi PETRONAS, 32610, Bandar Seri Iskandar, Perak, Malaysia
| | - Yeek-Chia Ho
- Civil and Environmental Engineering Department, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, Malaysia
- Centre for Urban Resource Sustainability, Institute for Self-Sustainable Building, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, Malaysia
| | - Zulkifli Merican Aljunid Merican
- Department of Fundamental and Applied Sciences, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, Malaysia
- Institute of Contaminant Management for Oil & Gas, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, Malaysia
| |
Collapse
|
5
|
Dominic D, Baidurah S. Recent Developments in Biological Processing Technology for Palm Oil Mill Effluent Treatment-A Review. BIOLOGY 2022; 11:biology11040525. [PMID: 35453724 PMCID: PMC9031994 DOI: 10.3390/biology11040525] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/25/2022] [Revised: 02/22/2022] [Accepted: 02/25/2022] [Indexed: 11/16/2022]
Abstract
Simple Summary Palm oil mill effluent (POME) requires treatment prior to discharge to the environment. Biological processing technology is highly preferable due to its advantages of environmentally friendliness, cost effectiveness, and practicality. These methods utilized various designs and modifications of bioreactors fostering effective fermentation technology in the presence of fungi, bacteria, microalgae, and a consortium of microorganisms. This review highlights the recent biological processing technology for POME treatment as a resource utilization. Abstract POME is the most voluminous waste generated from palm oil milling activities. The discharge of POME into the environment without any treatment processing could inflict an undesirable hazard to humans and the environment due to its high amount of toxins, organic, and inorganic materials. The treatment of POME prior to discharge into the environment is utmost required to protect the liability for human health and the environment. Biological treatments are preferable due to eco-friendly attributes that are technically and economically feasible. The goal of this review article is to highlight the current state of development in the biological processing technologies for POME treatment. These biological processing technologies are conducted in the presence of fungi, bacteria, microalgae, and a consortium of microorganisms. Numerous microbes are listed to identify the most efficient strain by monitoring the BOD, COD, working volume of the reactor, and treatment time. The most effective processing technology for POME treatment uses an upflow anaerobic sludge blanket reactor with the COD value of 99%, hydraulic retention time of 7.2 days, and a working volume of 4.7 litres. Biological processing technologies are mooted as an efficient and sustainable management practice of POME waste.
Collapse
|
6
|
Chew CL, Ab Karim NA, Quek WP, Wong SK, Lee YY, Chan ES. Aerobic-liquor treatment improves the quality and deep-frying performance of refined palm oil. Food Control 2021. [DOI: 10.1016/j.foodcont.2021.108072] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
7
|
Chew CL, Kong PS, Chan E. Aerobic Liquor Washing Improves the Quality of Crude Palm Oil by Reducing Free Fatty Acids and Chloride Contents. EUR J LIPID SCI TECH 2021. [DOI: 10.1002/ejlt.202000347] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Chien Lye Chew
- Sime Darby Plantation Research R&D Centre – Carey Island Lot 2664 Jalan Pulau Carey Pulau Carey Selangor 42960 Malaysia
- Chemical Engineering Discipline School of Engineering Monash University Malaysia Jalan Lagoon Selatan, Bandar Sunway Subang Jaya Selangor 47500 Malaysia
- Monash‐Industry Palm Oil Education and Research Platform (MIPO) Monash University Malaysia Jalan Lagoon Selatan Bandar Sunway Selangor 47500 Malaysia
| | - Pei San Kong
- Sime Darby Plantation Research R&D Centre – Carey Island Lot 2664 Jalan Pulau Carey Pulau Carey Selangor 42960 Malaysia
| | - Eng‐Seng Chan
- Chemical Engineering Discipline School of Engineering Monash University Malaysia Jalan Lagoon Selatan, Bandar Sunway Subang Jaya Selangor 47500 Malaysia
- Monash‐Industry Palm Oil Education and Research Platform (MIPO) Monash University Malaysia Jalan Lagoon Selatan Bandar Sunway Selangor 47500 Malaysia
| |
Collapse
|
8
|
Saputera WH, Amri AF, Daiyan R, Sasongko D. Photocatalytic Technology for Palm Oil Mill Effluent (POME) Wastewater Treatment: Current Progress and Future Perspective. MATERIALS 2021; 14:ma14112846. [PMID: 34073400 PMCID: PMC8198294 DOI: 10.3390/ma14112846] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/04/2021] [Revised: 05/20/2021] [Accepted: 05/24/2021] [Indexed: 01/29/2023]
Abstract
The palm oil industry produces liquid waste called POME (palm oil mill effluent). POME is stated as one of the wastes that are difficult to handle because of its large production and ineffective treatment. It will disturb the ecosystem with a high organic matter content if the waste is disposed directly into the environment. The authorities have established policies and regulations in the POME waste quality standard before being discharged into the environment. However, at this time, there are still many factories in Indonesia that have not been able to meet the standard of POME waste disposal with the existing treatment technology. Currently, the POME treatment system is still using a conventional system known as an open pond system. Although this process can reduce pollutants’ concentration, it will produce much sludge, requiring a large pond area and a long processing time. To overcome the inability of the conventional system to process POME is believed to be a challenge. Extensive effort is being invested in developing alternative technologies for the POME waste treatment to reduce POME waste safely. Several technologies have been studied, such as anaerobic processes, membrane technology, advanced oxidation processes (AOPs), membrane technology, adsorption, steam reforming, and coagulation. Among other things, an AOP, namely photocatalytic technology, has the potential to treat POME waste. This paper provides information on the feasibility of photocatalytic technology for treating POME waste. Although there are some challenges in this technology’s large-scale application, this paper proposes several strategies and directions to overcome these challenges.
Collapse
Affiliation(s)
- Wibawa Hendra Saputera
- Research Group on Energy and Chemical Engineering Processing System, Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung, Jl. Ganesha No. 10, Bandung 40132, Indonesia; (A.F.A.); (D.S.)
- Center for Catalysis and Reaction Engineering, Institut Teknologi Bandung, Jl. Ganesha No. 10, Bandung 40132, Indonesia
- Research Center for New and Renewable Energy (PPEBT), Institut Teknologi Bandung, Jl. Ganesha No. 10, Bandung 40132, Indonesia
- Correspondence: ; Tel.: +62-82117686235
| | - Aryan Fathoni Amri
- Research Group on Energy and Chemical Engineering Processing System, Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung, Jl. Ganesha No. 10, Bandung 40132, Indonesia; (A.F.A.); (D.S.)
| | - Rahman Daiyan
- Particles and Catalysis Research Group, School of Chemical Engineering, Faculty of Engineering, The University of New South Wales, Sydney, NSW 2052, Australia;
| | - Dwiwahju Sasongko
- Research Group on Energy and Chemical Engineering Processing System, Department of Chemical Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung, Jl. Ganesha No. 10, Bandung 40132, Indonesia; (A.F.A.); (D.S.)
- Research Center for New and Renewable Energy (PPEBT), Institut Teknologi Bandung, Jl. Ganesha No. 10, Bandung 40132, Indonesia
| |
Collapse
|
9
|
Saad MS, Wirzal MDH, Putra ZA. Review on current approach for treatment of palm oil mill effluent: Integrated system. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 286:112209. [PMID: 33631516 DOI: 10.1016/j.jenvman.2021.112209] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/24/2020] [Revised: 02/02/2021] [Accepted: 02/14/2021] [Indexed: 06/12/2023]
Abstract
Malaysia is one of the countries that is well known for its palm oil based products and exports all over the world. Over the years, palm oil mill has been rising at alarming rate in Malaysia, causing palm oil-based wastes to increase especially palm oil mill effluent (POME). POME in Malaysia are channelled into water bodies such as rivers after treated mostly with conventional biological method. However, with current technologies and knowledge, conventional POME treatments are seen to be outdated and require major improvements as greenhouse gaseous are emitted to the environment as well as being less cost effective. Integrated systems that combine two or more conventional methods are introduced and reviewed to provide insights on the advantages and disadvantages of the system if it is to be implemented in real life plant. Integrated systems that focus on combining conventional methods are compiled and reviewed specifically for POME treatment. Among the integrated methods that are reviewed includes biological with membrane, adsorption with magnetic field exposure, adsorption with membrane and electrocoagulation with membrane. The systems are seen to give excellent color, chemical oxygen demand (COD) and total suspended solids (TSS) removal with average of higher than 90%. Reduction in space utilization, improved treatment time as well as simplified operating system were reported when integrated systems are applied as compared to conventional treatment of POME.
Collapse
Affiliation(s)
- Muhammad Syaamil Saad
- Chemical Engineering Department, Universiti Teknologi PETRONAS, 32610, Bandar Seri Iskandar, Perak, Malaysia
| | - Mohd Dzul Hakim Wirzal
- Chemical Engineering Department, Universiti Teknologi PETRONAS, 32610, Bandar Seri Iskandar, Perak, Malaysia.
| | - Zulfan Adi Putra
- PETRONAS Group Technical Solutions, Project Delivery and Technology, PETRONAS, Kuala Lumpur, 50050, Malaysia
| |
Collapse
|
10
|
A Sustainable In situ Treatment Method to Improve the Quality of Crude Palm Oil by Repurposing Treated Aerobic Liquor. FOOD BIOPROCESS TECH 2021. [DOI: 10.1007/s11947-021-02582-6] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
11
|
Johnson D, Lun AW, Mohammed AW, Hilal N. Dewatering of POME digestate using lignosulfonate driven forward osmosis. Sep Purif Technol 2020. [DOI: 10.1016/j.seppur.2019.116151] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|
12
|
Food processing wastewater purification by microalgae cultivation associated with high value-added compounds production — A review. Chin J Chem Eng 2019. [DOI: 10.1016/j.cjche.2019.03.028] [Citation(s) in RCA: 29] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/07/2022]
|
13
|
|
14
|
Wenten IG, Khoiruddin K, Aryanti PT, Victoria AV, Tanukusuma G. Membrane-based zero-sludge palm oil mill plant. REV CHEM ENG 2018. [DOI: 10.1515/revce-2017-0117] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
Abstract
The palm oil industry is one of the most important agro-industries for tropical countries because of the unique properties and wide range of uses of palm oil for various end products. In a palm oil extraction process, a large quantity of water is required, of which half the quantity will end up as effluent. This palm oil mill effluent (POME) has an extremely high content of organic matter, which can cause severe pollution of waterways and other environmental problems. Disposal of this highly polluting effluent has become a major problem for the palm oil mills. Therefore, several methods have been proposed either to treat the POME so it could comply with environmental regulation while discharged or to recover water and other valuable components from the effluent. Membrane technology has emerged as a feasible alternative to conventional treatment in vegetable oil processing because of its attractive features such as low energy consumption, reduction in the number of processing steps, high separation efficiency, and improvement of the final product quality. In the case of POME treatment, an integrated membrane-based process promises efficient water recycling and total solid recovery from the effluent, thus eliminating the environmental problem. Recently, a novel concept combining oil–oil extraction and continuous filtration using a superhydrophobic membrane has been proposed to achieve a zero-sludge palm oil mill. In this concept, the huge wastewater effluent generated from the conventional process can be eliminated and the palm oil milling process simplified. Furthermore, the superhydrophobic membrane enables the production of high-purity palm oil. In this paper, we review the prospect of a zero-sludge palm oil mill concept and strategies to achieve the proposed concept. In addition, we also highlight the development of the superhydrophobic membrane and phytonutrient recovery.
Collapse
Affiliation(s)
- I. Gede Wenten
- Chemical Engineering Department , Institut Teknologi Bandung , Jl. Ganesha 10 , Bandung 40132 , Indonesia
- Research Center for Nanosciences and Nanotechnology, Institut Teknologi Bandung , Jl. Ganesha 10 , Bandung 40132 , Indonesia
| | - K. Khoiruddin
- Chemical Engineering Department , Institut Teknologi Bandung , Jl. Ganesha 10 , Bandung 40132 , Indonesia
| | - Putu T.P. Aryanti
- Chemical Engineering Department , Universitas Jenderal Achmad Yani , PO BOX 148 , Cimahi , Indonesia
| | - Agnes V. Victoria
- Chemical Engineering Department , Institut Teknologi Bandung , Jl. Ganesha 10 , Bandung 40132 , Indonesia
| | - Grace Tanukusuma
- Chemical Engineering Department , Institut Teknologi Bandung , Jl. Ganesha 10 , Bandung 40132 , Indonesia
| |
Collapse
|
15
|
Treatment of Palm Oil Mill Effluent Using Membrane Bioreactor: Novel Processes and Their Major Drawbacks. WATER 2018. [DOI: 10.3390/w10091165] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
Over the years, different types of alternative technologies have been developed and used for palm oil mill effluent (POME) treatment. Specifically, membrane bioreactor (MBR) has been employed to relegate pollutants contained in POME under different operating conditions, and the technology was found to be promising. The major challenge impeding the wider application of this technology is membrane fouling, which usually attracts high operating energy and running cost. In this regard, novel methods of mitigating membrane fouling through the treatment processes have been developed. Therefore, this review article specifically focuses on the recent treatment processes of POME using MBR, with particular emphasis on innovative processes conditions such as aerobic, anaerobic, and hybrid processing as well as their performance in relation to fouling minimization. Furthermore, the effects of sonication and thermophilic and mesophilic conditions on membrane blockage were critically reviewed. The types of foulants and fouling mechanism as influenced by different operating conditions were also analyzed censoriously.
Collapse
|
16
|
Bello MM, Abdul Raman AA. Trend and current practices of palm oil mill effluent polishing: Application of advanced oxidation processes and their future perspectives. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2017; 198:170-182. [PMID: 28460324 DOI: 10.1016/j.jenvman.2017.04.050] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/25/2016] [Revised: 04/13/2017] [Accepted: 04/15/2017] [Indexed: 06/07/2023]
Abstract
Palm oil processing is a multi-stage operation which generates large amount of effluent. On average, palm oil mill effluent (POME) may contain up to 51, 000 mg/L COD, 25,000 mg/L BOD, 40,000 TS and 6000 mg/L oil and grease. Due to its potential to cause environmental pollution, palm oil mills are required to treat the effluent prior to discharge. Biological treatments using open ponding system are widely used for POME treatment. Although these processes are capable of reducing the pollutant concentrations, they require long hydraulic retention time and large space, with the effluent frequently failing to satisfy the discharge regulation. Due to more stringent environmental regulations, research interest has recently shifted to the development of polishing technologies for the biologically-treated POME. Various technologies such as advanced oxidation processes, membrane technology, adsorption and coagulation have been investigated. Among these, advanced oxidation processes have shown potentials as polishing technologies for POME. This paper offers an overview on the POME polishing technologies, with particularly emphasis on advanced oxidation processes and their prospects for large scale applications. Although there are some challenges in large scale applications of these technologies, this review offers some perspectives that could help in overcoming these challenges.
Collapse
Affiliation(s)
- Mustapha Mohammed Bello
- Department of Chemical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, 50603, Malaysia; Centre for Dryland Agriculture, Bayero University, P.M.B. 3011, Kano State, Nigeria.
| | - Abdul Aziz Abdul Raman
- Department of Chemical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, 50603, Malaysia.
| |
Collapse
|
17
|
Ho K, Teow Y, Ang W, Mohammad A. Novel GO/OMWCNTs mixed-matrix membrane with enhanced antifouling property for palm oil mill effluent treatment. Sep Purif Technol 2017. [DOI: 10.1016/j.seppur.2017.01.014] [Citation(s) in RCA: 68] [Impact Index Per Article: 9.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/07/2022]
|
18
|
Anaerobic Treatment of Palm Oil Mill Effluent in Pilot-Scale Anaerobic EGSB Reactor. BIOMED RESEARCH INTERNATIONAL 2015; 2015:398028. [PMID: 26167485 PMCID: PMC4488516 DOI: 10.1155/2015/398028] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/01/2015] [Revised: 03/23/2015] [Accepted: 03/24/2015] [Indexed: 11/17/2022]
Abstract
Large volumes of untreated palm oil mill effluent (POME) pose threat to aquatic environment due to the presence of very high organic content. The present investigation involved two pilot-scale anaerobic expanded granular sludge bed (EGSB) reactors, continuously operated for 1 year to treat POME. Setting HRT at 9.8 d, the anaerobic EGSB reactors reduced COD from 71179 mg/L to 12341 mg/L and recycled half of sludge by a dissolved air flotation (DAF). The average effluent COD was 3587 mg/L with the consistent COD removal efficiency of 94.89%. Adding cationic polymer (PAM) dose of 30 mg/L to DAF unit and recycling its half of sludge caused granulation of anaerobic sludge. Bacilli and small coccid bacteria were the dominant microbial species of the reactor. The reactor produced 27.65 m(3) of biogas per m(3) of POME which was utilized for electricity generation.
Collapse
|
19
|
Zero discharge performance of an industrial pilot-scale plant treating palm oil mill effluent. BIOMED RESEARCH INTERNATIONAL 2015; 2015:617861. [PMID: 25685798 PMCID: PMC4317585 DOI: 10.1155/2015/617861] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/06/2014] [Accepted: 10/02/2014] [Indexed: 11/18/2022]
Abstract
Palm oil is one of the most important agroindustries in Malaysia. Huge quantities of palm oil mill effluent (POME) pose a great threat to aqueous environment due to its very high COD. To make full use of discharged wastes, the integrated “zero discharge” pilot-scale industrial plant comprising “pretreatment-anaerobic and aerobic process-membrane separation” was continuously operated for 1 year. After pretreatment in the oil separator tank, 55.6% of waste oil in raw POME could be recovered and sold and anaerobically digested through 2 AnaEG reactors followed by a dissolved air flotation (DAF); average COD reduced to about 3587 mg/L, and biogas production was 27.65 times POME injection which was used to generate electricity. The aerobic effluent was settled for 3 h or/and treated in MBR which could remove BOD3 (30°C) to less than 20 mg/L as required by Department of Environment of Malaysia. After filtration by UF and RO membrane, all organic compounds and most of the salts were removed; RO permeate could be reused as the boiler feed water. RO concentrate combined with anaerobic surplus sludge could be used as biofertilizer.
Collapse
|
20
|
Miksch K, Cema G, Corvini PFX, Felis E, Sochacki A, Surmacz-Górska J, Wiszniowski J, Żabczynski S. R&D priorities in the field of sustainable remediation and purification of agro-industrial and municipal wastewater. N Biotechnol 2015; 32:128-32. [DOI: 10.1016/j.nbt.2013.11.002] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2013] [Revised: 11/11/2013] [Accepted: 11/15/2013] [Indexed: 11/15/2022]
|
21
|
Ng KH, Cheng CK. A novel photomineralization of POME over UV-responsive TiO2photocatalyst: kinetics of POME degradation and gaseous product formations. RSC Adv 2015. [DOI: 10.1039/c5ra06922j] [Citation(s) in RCA: 38] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Figures (a) settling pond from where the POME was collected, (b) filtered POME was ready for UV-irradiation and (c) POME after 20 h of photocatalytic reaction became clear after the solid TiO2was removed.
Collapse
Affiliation(s)
- Kim Hoong Ng
- Faculty of Chemical & Natural Resources Engineering
- Universiti Malaysia Pahang
- 26300 Gambang Kuantan
- Malaysia
| | - Chin Kui Cheng
- Faculty of Chemical & Natural Resources Engineering
- Universiti Malaysia Pahang
- 26300 Gambang Kuantan
- Malaysia
- Centre of Excellence for Advanced Research in Fluid Flow
| |
Collapse
|
22
|
|
23
|
Ramos C, García A, Diez V. Performance of an AnMBR pilot plant treating high-strength lipid wastewater: biological and filtration processes. WATER RESEARCH 2014; 67:203-215. [PMID: 25282089 DOI: 10.1016/j.watres.2014.09.021] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/29/2014] [Revised: 09/11/2014] [Accepted: 09/14/2014] [Indexed: 06/03/2023]
Abstract
The performance of an anaerobic membrane bioreactor (AnMBR) treating wastewater with high levels of oil and grease content from a snacks factory is studied and its effectiveness is demonstrated. The relation between the reversible and the irreversible fouling rate and the fouling propensity of the fatty matter were evaluated under a subcritical flux of 7.9 and 8.3 L/m(2) h. Low Oil and Grease (O&G) concentrations of 500 mg/L produced an irreversible fouling rate of only 0.09 mbar/d, while the fouling rate was between 0.96 and 3.95 mbar/d for an average O&G concentration of 6 g/L. In spite of the significant increase in filtration resistance from 0.31 to 6.08 × 10(12) m(-1) after 40 days of continuous operation, the critical flux level hardly decreased from 11.1 to 9.7 L/(m(2) h). With regard to the biological process, after a start-up period with an organic loading rate (OLR) of below 2 kg COD/(m(3) d), the system was able to treat wastewater between 4.6 and 36 g O&G/L and the system remained stable for OLR at around 17 kg COD/(m(3) d) for 2.8 d, without inhibitory signals. Acclimated sludge quickly reached maximum methane production and digested substrate with high oil and grease content, observing an increase in palmitic acid the first days and constant levels of propionic acid while fatty acids were in the medium.
Collapse
Affiliation(s)
- C Ramos
- Department of Biotechnology and Food Science, Area of Chemical Engineering, University of Burgos, Faculty of Sciences, Pz. Misael Bañuelos, 09001 Burgos, Spain.
| | - A García
- Department of Biotechnology and Food Science, Area of Chemical Engineering, University of Burgos, Faculty of Sciences, Pz. Misael Bañuelos, 09001 Burgos, Spain.
| | - V Diez
- Department of Biotechnology and Food Science, Area of Chemical Engineering, University of Burgos, Faculty of Sciences, Pz. Misael Bañuelos, 09001 Burgos, Spain.
| |
Collapse
|
24
|
Mustafa N, Elbeshbishy E, Nakhla G, Zhu J. Anaerobic digestion of municipal wastewater sludges using anaerobic fluidized bed bioreactor. BIORESOURCE TECHNOLOGY 2014; 172:461-466. [PMID: 25280599 DOI: 10.1016/j.biortech.2014.09.081] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/07/2014] [Revised: 09/16/2014] [Accepted: 09/17/2014] [Indexed: 06/03/2023]
Abstract
The anaerobic digestion of primary sludge (PS) and thickened waste activated sludge (TWAS) using an anaerobic fluidized bed bioreactor (AnFBR) employing zeolite particles as the carrier media was investigated at different organic loading rates (OLRs). PS was tested at OLRs from 4.2 to 39kgCOD/m(3)-d corresponding to hydraulic retention times (HRTs) from 1.0 to 8.9days. The highest COD removal and VSS destruction efficiencies for primary sludge of 85% and 88%, respectively, were achieved at an HRT of 8.9days and OLR of 4.2kgCOD/m(3)-d. For TWAS, VSS destruction efficiencies varied from 42% at an HRT of 2.6days and OLR of 13.1kgCOD/m(3)-d to 69% at an HRT of 8.8days and an OLR of 4.2kgCOD/m(3)-d. The first-order COD biodegradation rates in the AnFBR for PS and TWAS were 0.4d(-1) and 0.1d(-1), respectively, almost double the rates in conventional high-rate digesters.
Collapse
Affiliation(s)
- Nizar Mustafa
- Department of Civil and Environmental Engineering, University of Western Ontario, London, Ontario N6A 5B9, Canada
| | - Elsayed Elbeshbishy
- Department of Civil and Environmental Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
| | - George Nakhla
- Department of Civil and Environmental Engineering, University of Western Ontario, London, Ontario N6A 5B9, Canada; Department of Chemical and Biochemical Engineering, University of Western Ontario, London, Ontario N6A 5B9, Canada.
| | - Jesse Zhu
- Department of Chemical and Biochemical Engineering, University of Western Ontario, London, Ontario N6A 5B9, Canada
| |
Collapse
|
25
|
Budiman PM, Wu TY, Ramanan RN, Hay JXW. Treatment and Reuse of Effluents from Palm Oil, Pulp, and Paper Mills as a Combined Substrate by Using Purple Nonsulfur Bacteria. Ind Eng Chem Res 2014. [DOI: 10.1021/ie501798f] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Pretty Mori Budiman
- Chemical
Engineering
Discipline, School of Engineering, Monash University, Jalan Lagoon Selatan, 46150 Bandar Sunway, Selangor Darul Ehsan, Malaysia
| | - Ta Yeong Wu
- Chemical
Engineering
Discipline, School of Engineering, Monash University, Jalan Lagoon Selatan, 46150 Bandar Sunway, Selangor Darul Ehsan, Malaysia
| | - Ramakrishnan Nagasundara Ramanan
- Chemical
Engineering
Discipline, School of Engineering, Monash University, Jalan Lagoon Selatan, 46150 Bandar Sunway, Selangor Darul Ehsan, Malaysia
| | - Jacqueline Xiao Wen Hay
- Chemical
Engineering
Discipline, School of Engineering, Monash University, Jalan Lagoon Selatan, 46150 Bandar Sunway, Selangor Darul Ehsan, Malaysia
| |
Collapse
|
26
|
Manickam S, Abidin NBZ, Parthasarathy S, Alzorqi I, Ng EH, Tiong TJ, Gomes RL, Ali A. Role of H2O2 in the fluctuating patterns of COD (chemical oxygen demand) during the treatment of palm oil mill effluent (POME) using pilot scale triple frequency ultrasound cavitation reactor. ULTRASONICS SONOCHEMISTRY 2014; 21:1519-1526. [PMID: 24485395 DOI: 10.1016/j.ultsonch.2014.01.002] [Citation(s) in RCA: 32] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/28/2013] [Revised: 12/31/2013] [Accepted: 01/06/2014] [Indexed: 06/03/2023]
Abstract
Palm oil mill effluent (POME) is a highly contaminating wastewater due to its high chemical oxygen demand (COD) and biochemical oxygen demand (BOD). Conventional treatment methods require longer residence time (10-15 days) and higher operating cost. Owing to this, finding a suitable and efficient method for the treatment of POME is crucial. In this investigation, ultrasound cavitation technology has been used as an alternative technique to treat POME. Cavitation is the phenomenon of formation, growth and collapse of bubbles in a liquid. The end process of collapse leads to intense conditions of temperature and pressure and shock waves which assist various physical and chemical transformations. Two different ultrasound systems i.e. ultrasonic bath (37 kHz) and a hexagonal triple frequency ultrasonic reactor (28, 40 and 70 kHz) of 15 L have been used. The results showed a fluctuating COD pattern (in between 45,000 and 60,000 mg/L) while using ultrasound bath alone, whereas a non-fluctuating COD pattern with a final COD of 27,000 mg/L was achieved when hydrogen peroxide was introduced. Similarly for the triple frequency ultrasound reactor, coupling all the three frequencies resulted into a final COD of 41,300 mg/L compared to any other individual or combination of two frequencies. With the possibility of larger and continuous ultrasonic cavitational reactors, it is believed that this could be a promising and a fruitful green process engineering technique for the treatment of POME.
Collapse
Affiliation(s)
- Sivakumar Manickam
- Manufacturing and Industrial Processes Research Division, Faculty of Engineering, University of Nottingham Malaysia Campus, 43500 Semenyih, Selangor, Malaysia.
| | - Norhaida binti Zainal Abidin
- Manufacturing and Industrial Processes Research Division, Faculty of Engineering, University of Nottingham Malaysia Campus, 43500 Semenyih, Selangor, Malaysia
| | - Shridharan Parthasarathy
- Manufacturing and Industrial Processes Research Division, Faculty of Engineering, University of Nottingham Malaysia Campus, 43500 Semenyih, Selangor, Malaysia
| | - Ibrahim Alzorqi
- Manufacturing and Industrial Processes Research Division, Faculty of Engineering, University of Nottingham Malaysia Campus, 43500 Semenyih, Selangor, Malaysia
| | - Ern Huay Ng
- Manufacturing and Industrial Processes Research Division, Faculty of Engineering, University of Nottingham Malaysia Campus, 43500 Semenyih, Selangor, Malaysia
| | - Timm Joyce Tiong
- Manufacturing and Industrial Processes Research Division, Faculty of Engineering, University of Nottingham Malaysia Campus, 43500 Semenyih, Selangor, Malaysia
| | - Rachel L Gomes
- Process and Environmental Research Division, Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, United Kingdom
| | - Asgar Ali
- School of Biosciences, Faculty of Science, University of Nottingham Malaysia Campus, 43500 Semenyih, Selangor, Malaysia
| |
Collapse
|
27
|
Shen X, Zhao Y, Feng X, Zhang Q, Chen L. Temperature-sensitive PVDF hollow fiber membrane fabricated at different air gap lengths. POLYM ENG SCI 2013. [DOI: 10.1002/pen.23504] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/25/2023]
Affiliation(s)
- Xiang Shen
- State Key Laboratory of Hollow Fiber Membrane Materials and Processes; School of Materials Science and Engineering; Tianjin Polytechnic University; Tianjin 300387 China
| | - Yiping Zhao
- State Key Laboratory of Hollow Fiber Membrane Materials and Processes; School of Materials Science and Engineering; Tianjin Polytechnic University; Tianjin 300387 China
| | - Xia Feng
- State Key Laboratory of Hollow Fiber Membrane Materials and Processes; School of Materials Science and Engineering; Tianjin Polytechnic University; Tianjin 300387 China
| | - Qiang Zhang
- State Key Laboratory of Hollow Fiber Membrane Materials and Processes; School of Materials Science and Engineering; Tianjin Polytechnic University; Tianjin 300387 China
| | - Li Chen
- State Key Laboratory of Hollow Fiber Membrane Materials and Processes; School of Materials Science and Engineering; Tianjin Polytechnic University; Tianjin 300387 China
| |
Collapse
|
28
|
Stuckey DC. Recent developments in anaerobic membrane reactors. BIORESOURCE TECHNOLOGY 2012; 122:137-148. [PMID: 22749372 DOI: 10.1016/j.biortech.2012.05.138] [Citation(s) in RCA: 53] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/06/2011] [Revised: 05/25/2012] [Accepted: 05/28/2012] [Indexed: 05/27/2023]
Abstract
Anaerobic membrane reactors (AnMBRs) have recently evolved from aerobic MBRs, with the membrane either external or submerged within the reactor, and can achieve high COD removals (~98%) at hydraulic retention times (HRTs) as low as 3 h. Since membranes stop biomass being washed out, they can enhance performance with inhibitory substrates, at psychrophilic/thermophilic temperatures, and enable nitrogen removal via Anammox. Fouling is important, but addition of activated carbon or resins/precipitants can remove soluble microbial products (SMPs)/colloids and enhance flux. Due to their low energy use and solids production, and solids free effluent, they can enhance nutrient and water recycling. Nevertheless, more work is needed to: compare fouling between aerobic and anaerobic systems; determine how reactor operation influences fouling; evaluate the effect of different additives on membrane fouling; determine whether nitrogen removal can be incorporated into AnMBRs; recover methane solubility from low temperatures effluents; and, establish sound mass and energy balances.
Collapse
Affiliation(s)
- David C Stuckey
- Department of Chemical Engineering and Chemical Technology, Imperial College of Science, Technology and Medicine, Prince Consort Road, London SW7 2BY, UK.
| |
Collapse
|
29
|
Andalib M, Hafez H, Elbeshbishy E, Nakhla G, Zhu J. Treatment of thin stillage in a high-rate anaerobic fluidized bed bioreactor (AFBR). BIORESOURCE TECHNOLOGY 2012; 121:411-418. [PMID: 22864177 DOI: 10.1016/j.biortech.2012.07.008] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/22/2012] [Revised: 07/05/2012] [Accepted: 07/07/2012] [Indexed: 06/01/2023]
Abstract
The primary objective of this work was to investigate the treatability of thin stillage as a by-product of bioethanol production plants using an anaerobic fluidized bed bioreactor (AFBR) employing zeolite with average diameter of (d(m)) of 425-610 μm and specific surface area (SSA) of 26.5m(2)/g as the carrier media. Despite the very high strength of thin stillage with chemical oxygen demand of 130,000 mg TCOD/L and suspended solids of 47,000 mg TSS/L, the AFBR showed up to 88% TCOD and 78% TSS removal at very high organic and solids loading rates (OLR and SLR) of 29 kg COD/m(3)d and 10.5 kg TSS/m(3)d respectively and hydraulic retention time (HRT) of 3.5 days. Methane production rates of up to 160 L/d at the steady state equivalent to 40 L(CH4)/L(thin stillage)d and biogas production rate per reactor volume of 15.8L(gas)/L(reactor)d were achieved.
Collapse
Affiliation(s)
- Mehran Andalib
- Department of Chemical and Biochemical Engineering, University of Western Ontario, London, Ontario, Canada
| | | | | | | | | |
Collapse
|
30
|
El-Kamah H, Mahmoud M, Tawfik A. Performance of down-flow hanging sponge (DHS) reactor coupled with up-flow anaerobic sludge blanket (UASB) reactor for treatment of onion dehydration wastewater. BIORESOURCE TECHNOLOGY 2011; 102:7029-7035. [PMID: 21546245 DOI: 10.1016/j.biortech.2011.04.017] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/31/2010] [Revised: 04/04/2011] [Accepted: 04/07/2011] [Indexed: 05/30/2023]
Abstract
In this study, a promising system consisting of up-flow anaerobic sludge blanket (UASB) reactor followed by down-flow hanging sponge (DHS) reactor was investigated for onion dehydration wastewater treatment. Laboratory experiments were conducted at two different phases, i.e., phase (1) at overall hydraulic retention time (HRT) of 11h (UASB reactor: 6h and DHS reactor: 5h) and phase (2) at overall HRT of 9.4h (UASB reactor: 5.2h and DHS reactor: 4.2h). Long-term operation results of the proposed system showed that its overall TCOD, TBOD, TSS, TKN and NH(4)-N removal efficiencies were 92 ± 5, 95 ± 2, 95 ± 2, 72 ± 6 and 99 ± 1.3%, respectively (phase 1). Corresponding values for the 2nd phase were 85.4 ± 5, 86 ± 3, 87 ± 6, 65 ± 8 and 95 ± 2.8%. Based on the available results, the proposed system could be more viable option for treatment of wastewater generated from onion dehydration industry in regions with tropical or sub-tropical climates and with stringent discharge standards.
Collapse
Affiliation(s)
- Hala El-Kamah
- Water Pollution Research Department, National Research Centre, El-Tahrir St., Dokki, PO Box, Cairo 12311, Egypt
| | | | | |
Collapse
|
31
|
Fang C, O-Thong S, Boe K, Angelidaki I. Comparison of UASB and EGSB reactors performance, for treatment of raw and deoiled palm oil mill effluent (POME). JOURNAL OF HAZARDOUS MATERIALS 2011; 189:229-234. [PMID: 21377272 DOI: 10.1016/j.jhazmat.2011.02.025] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/15/2010] [Revised: 01/18/2011] [Accepted: 02/10/2011] [Indexed: 05/30/2023]
Abstract
Anaerobic digestion of palm oil mill effluent (POME) and deoiled POME was investigated both in batch assays and continuous reactor experiments using up-flow anaerobic sludge blanket (UASB) and expanded granular sludge bed (EGSB) reactors. The methane potential determined from batch assays of POME and deoiled POME was 503 and 610 mL-CH(4)/gVS-added, respectively. For the treatment of POME in continuously fed reactors, both in UASB and EGSB reactors more than 90% COD removal could be obtained, at HRT of 5 days, corresponding to OLR of 5.8 gVS/(L-reactor.d). Similar methane yields of 436-438 mL-CH(4)/gVS-added were obtained for UASB and EGSB respectively. However, for treatment of deoiled POME, both UASB and EGSB reactors could operate at lower OLR of 2.6 gVS/(L-reactor.d), with the methane yield of 600 and 555 mL-CH(4)/gVS-added for UASB and EGSB, respectively. The higher methane yield achieved from the deoiled POME was attributed to lower portion of biofibers which are more recalcitrant compared the rest of organic matter in POME. The UASB reactor was found to be more stable than EGSB reactor under the same OLR, as could be seen from lower VFA concentration, especially propionic acid, compared to the EGSB reactor.
Collapse
Affiliation(s)
- Cheng Fang
- Department of Environmental Engineering, Technical University of Denmark, Building 113, DK-2800, Kgs Lyngby, Denmark
| | | | | | | |
Collapse
|
32
|
Wu TY, Mohammad AW, Jahim JM, Anuar N. Pollution control technologies for the treatment of palm oil mill effluent (POME) through end-of-pipe processes. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2010; 91:1467-1490. [PMID: 20231054 DOI: 10.1016/j.jenvman.2010.02.008] [Citation(s) in RCA: 46] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/03/2008] [Revised: 01/21/2010] [Accepted: 02/09/2010] [Indexed: 05/28/2023]
Abstract
Palm oil production is one of the major industries in Malaysia and this country ranks one of the largest productions in the world. In Malaysia, the total production of crude palm oil in 2008 was 17,734,441 tonnes. However, the production of this amount of crude palm oil results in even larger amounts of palm oil mill effluent (POME). In the year 2008 alone, at least 44 million tonnes of POME was generated in Malaysia. Currently, the ponding system is the most common treatment method for POME but other processes such as aerobic and anaerobic digestion, physicochemical treatment and membrane filtration may also provide the palm oil industries with possible insights into the improvement of POME treatment processes. Generally, open ponding offers low capital and operating costs but this conventional method is becoming less attractive because the methane produced is wasted to the atmosphere and the system can not be certified for Carbon Emission Reduction trading. On the other hand, anaerobic digestion of POME provides the fastest payback of investment because the treatment enables biogas recovery for heat generation and treated effluent for land application. Lastly, it is proposed herewith that wastewater management based on the promotion of cleaner production and environmentally sound biotechnologies should be prioritized and included as a part of the POME management in Malaysia for attaining sustainable development. This paper thus discusses and compares state-of-the-art POME treatment methods as well as their individual performances.
Collapse
Affiliation(s)
- Ta Yeong Wu
- Chemical and Sustainable Process Engineering Research Group, School of Engineering, Monash University, Jalan Lagoon Selatan, Bandar Sunway, 46150, Selangor Darul Ehsan, Malaysia. wu.ta.yeong@eng
| | | | | | | |
Collapse
|
33
|
Limkhuansuwan V, Chaiprasert P. Decolorization of molasses melanoidins and palm oil mill effluent phenolic compounds by fermentative lactic acid bacteria. J Environ Sci (China) 2010; 22:1209-17. [PMID: 21179960 DOI: 10.1016/s1001-0742(09)60240-0] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
Lactobacillus plantarum SF5.6 is one of the lactic acid bacteria (LAB) that has the highest ability of molasses melanoidin (MM) decolorization among the 2114 strains of LAB. The strains were isolated from spoilage, pickle fruit and vegetable, soil and sludge from the wastewater treatment system by using technical step of enrichment, primary screening and secondary screening. This LAB strain SF5.6 was identified by 16S rDNA analysis and carbohydrate fermentation (API 50 CH). The top five LAB strains having high MM decolorization (> 55%), namely TBSF5.8-1, TBSF2.1-1, TBSF2.1, FF4A and SF5.6 were selected to determine the optimal condition. It was found that the temperature at 30 degrees C under facultative conditions in GPY-MM medium (0.5% glucose, 0.1% peptone, 0.1% yeast extract, 0.1% sodium acetate, 0.05% MgSO4 and 0.005% MnCl2 in MM solution at pH 6) giving a high microbial growth and MM decolorization for all five strains. It was noticed that the decolorization of MM by LAB strains might be cell growth associated. L. plantarum SF5.6 grew rapidly within one day while the other strains took 2-3 days. This L. plantarum SF5.6 could rapidly decolorize MM to 60.91% without any lag phase, and it also had the ability to remove 34.00% phenolic compounds and 15.88% color from treated palm oil mill effluent.
Collapse
Affiliation(s)
- Vassanasak Limkhuansuwan
- Division of Environmental Technology, School of Energy, Environment and Materials, King Mongkut's University of Technology Thonburi, Bangkok 10140, Thailand.
| | | |
Collapse
|