Oxygenator anatomy and function

A Reduced Resistance, Concentric-Gated Artificial Membrane Lung for Pediatric End-Stage Lung Failure

The goal of the low-resistance pediatric artificial lung (PAL-LR) is to serve as a pumpless bridge-to-transplant device for children with end-stage lung failure. The PAL-LR doubles the exposed fiber length of the previous PAL design. In vitro and in vivo studies tested hemocompatibility, device flow, gas exchange and pressure drop performance. For in vitro tests, average rated blood flow (outlet SO 2 of 95%) was 2.56 ± 0.93 L/min with a pressure drop of 25.88 ± 0.90 mm Hg. At the targeted pediatric flow rate of 1 L/min, the pressure drop was 8.6 mm Hg compared with 25 mm Hg of the PAL. At rated flow, the average O 2 and CO 2 transfer rates were 101.75 ± 10.81 and 77.93 ± 8.40 mL/min, respectively. The average maximum O 2 and CO 2 exchange efficiencies were 215.75 ± 22.93 and 176.99 ± 8.40 mL/(min m 2 ), respectively. In vivo tests revealed an average outlet SO 2 of 100%, and average pressure drop of 2 ± 0 mm Hg for a blood flow of 1.07 ± 0.02 L/min. Having a lower resistance, the PAL-LR is a promising step closer to a pumpless artificial membrane lung that alleviates right ventricular strain associated with idiopathic pulmonary hypertension.

A novel poly (4-methyl-1-pentene)/polypropylene (PMP/PP) thin film composite (TFC) artificial lung membrane for enhanced gas transport and excellent hemo-compatibility

Extracorporeal membrane oxygenation is a technique that provides short-term supports to the heart and lungs. It removes CO2 from the blood and provides enough oxygen, which is a huge help in the fight against COVID-19. As the key component, the artificial lung membranes have evolved in three generations including silicon, polypropylene and poly (4-methyl-1-pentene). Herein, we for the first time design and fabricate a novel poly (4-methyl-1-pentene)/polypropylene (PMP/PP) thin film composite (TFC) membrane with the anticoagulant coating composed of poly (sodium 4-styrenesulfonate) and cross-linked poly (vinyl alcohol). Poly (sodium 4-styrenesulfonate) provides sulfonic acid groups to inhibit the coagulant factors (FVIII and FXII), and cross-linked poly (vinyl alcohol) increase the stability of the anticoagulant coating and further improve the hydrophilicity via abundant hydroxyl groups to depress the protein adsorption. Long-term anticoagulant property was demonstrated by whole human blood for 28 days. Blood compatibility was evaluated by hemolysis rate, anticoagulation activity (APTT, TT and PT), complement activation, platelet activation and contact activation. Pure CO2, O2 and N2 permeation rates were determined to evaluate the mass transfer properties of PMP/PP TFC membranes. Gas permeation results revealed that gas permeation flux increased in the TFC membranes because of the decrease of crystallinity. Overall, the so prepared PMP/PP membrane shows good CO2/O2 selectivity and blood compatibility as novel TFC artificial lung membrane.

Bioengineering Progress in Lung Assist Devices

Artificial lung technology is advancing at a startling rate raising hopes that it would better serve the needs of those requiring respiratory support. Whether to assist the healing of an injured lung, support patients to lung transplantation, or to entirely replace native lung function, safe and effective artificial lungs are sought. After 200 years of bioengineering progress, artificial lungs are closer than ever before to meet this demand which has risen exponentially due to the COVID-19 crisis. In this review, the critical advances in the historical development of artificial lungs are detailed. The current state of affairs regarding extracorporeal membrane oxygenation, intravascular lung assists, pump-less extracorporeal lung assists, total artificial lungs, and microfluidic oxygenators are outlined.

Investigations of the characteristics and performance of modified polyethersulfones (PES) as membrane oxygenator

The modification of membrane oxygenators to minimize protein adsorption onto the surface is often accompanied by the loss of membrane performance. This study aims to explore polyethersulfone (PES) as a new material for membrane oxygenator applications and to assess its potentials. Accordingly, different modification techniques are applied to improve surface properties of PES membranes. To achieve this goal, two separate modification methods including incorporation of TiO2 into the membrane matrix as well as grafting polyethylene glycol (PEG) through oxygen plasma treatment are developed and the effects are examined. The results reveal that protein adsorption to the nanocomposite membrane containing 0.50 wt. % TiO2 and the grafted membrane decreased by 47 and 31%, respectively. In terms of performance, permeability and oxygen transfer rate of all modified membranes exceeded 808 GPU and 2.7 × 10−4 mol·m−2·s−1, respectively. Contact angle analysis revealed signs of hydrophilicity enhancement of membranes after modifications. The findings suggest that upon proper modifications, membranes based on PES could be considered as promising candidates for membrane oxygenator applications and deserves further investigations.

Low-Resistance, Concentric-Gated Pediatric Artificial Lung for End-Stage Lung Failure

Children with end-stage lung failure awaiting lung transplant would benefit from improvements in artificial lung technology allowing for wearable pulmonary support as a bridge-to-transplant therapy. In this work, we designed, fabricated, and tested the Pediatric MLung-a dual-inlet hollow fiber artificial lung based on concentric gating, which has a rated flow of 1 L/min, and a pressure drop of 25 mm Hg at rated flow. This device and future iterations of the current design are designed to relieve pulmonary arterial hypertension, provide pulmonary support, reduce ventilator-associated injury, and allow for more effective therapy of patients with end-stage lung disease, including bridge-to-transplant treatment.

Artificial placenta and womb technology: Past, current, and future challenges towards clinical translation

Extreme prematurity remains a major cause of neonatal mortality and severe long-term morbidity. Current neonatal care is associated with significant morbidity due to iatrogenic injury and developmental immaturity of extreme premature infants. A more physiologic approach, replacing placental function and providing a womb-like environment, is the foundational principle of artificial placenta (AP) and womb (AW) technology. The concept has been studied during the past 60 years with limited success. However, recent technological advancements and a greater emphasis on mimicking utero-placental physiology have improved the success of experimental models, bringing the technology closer to clinical translation. Here, we review the rationale for and history of AP and AW technology, discuss the challenges that needed to be overcome, and compare recent successful models. We conclude by outlining some remaining challenges to be addressed on the path towards clinical translation and opportunities for future research.

Early in vivo experience with the pediatric continuous-flow total artificial heart

BACKGROUND

Heart transplantation in infants and children is an accepted therapy for end-stage heart failure, but donor organ availability is low and always uncertain. Mechanical circulatory support is another standard option, but there is a lack of intracorporeal devices due to size and functional range. The purpose of this study was to evaluate the in vivo performance of our initial prototype of a pediatric continuous-flow total artificial heart (P-CFTAH), comprising a dual pump with one motor and one rotating assembly, supported by a hydrodynamic bearing.

METHODS

In acute studies, the P-CFTAH was implanted in 4 lambs (average weight: 28.7 ± 2.3 kg) via a median sternotomy under cardiopulmonary bypass. Pulmonary and systemic pump performance parameters were recorded.

RESULTS

The experiments showed good anatomical fit and easy implantation, with an average aortic cross-clamp time of 98 ± 18 minutes. Baseline hemodynamics were stable in all 4 animals (pump speed: 3.4 ± 0.2 krpm; pump flow: 2.1 ± 0.9 liters/min; power: 3.0 ± 0.8 W; arterial pressure: 68 ± 10 mm Hg; left and right atrial pressures: 6 ± 1 mm Hg, for both). Any differences between left and right atrial pressures were maintained within the intended limit of ±5 mm Hg over a wide range of ratios of systemic-to-pulmonary vascular resistance (0.7 to 12), with and without pump-speed modulation. Pump-speed modulation was successfully performed to create arterial pulsation.

CONCLUSION

This initial P-CFTAH prototype met the proposed requirements for self-regulation, performance, and pulse modulation.

Recent innovations in perfusion and cardiopulmonary bypass for neonatal and infant cardiac surgery

The development and refinement of cardiopulmonary bypass (CPB) has made the repair of complex congenital heart defects possible in neonates and infants. In the past, the primary goal for these procedures was patient survival. Now that substantial survival rates have been achieved for even the most complex of repairs in these patients, focus has been given to the reduction of morbidity. Although a necessity for these complex neonatal and infant heart defect repairs, CPB can also be an important source of perioperative complications. Recent innovations have been developed to mitigate these risks and is the topic of this review. Specifically, we will discuss improvements in minimizing blood transfusions, CPB circuit design, monitoring, perfusion techniques, temperature management, and myocardial protection, and then conclude with a brief discussion of how further systematic improvements can be made in these areas.

A Small Scale Oxygenator for Cardiopulmonary Bypass in Rats

Cardiopulmonary bypass (CPB) devices replace transiently the function of both heart and lungs, allowing the investigator to work safely on a stopped heart. Although this technology has greatly improved since its first applications in the early 1950's there is still no definitive rat CPB model, various experiments reporting drawbacks like pulmonary edema, large priming volumes, etc. We present a new oxygenator that can be used in cardiopulmonary bypass experiments in rats, simple in design and efficient in function, in which the process of blood oxygenation takes place in a vertical cylinder filled up with air or oxygen, with blood being spread onto the wall and then trickling down in a thin layer that facilitates the oxygen transfer. The oxygenation is efficient, the pO2 reaches levels of almost 150 mmHg (physiological level is around 100 mmHg) in conditions of oxygen saturation of over 99% (normal levels 95%-98%).

ENDOXY - Development of a Biomimetic Oxygenator-Test-Device

Objective

This study focusses on the development of a biomimetic oxygenator test device. Due to limited biocompatibility, current oxygenators do not allow mid- to long-term therapy. Tissue engineering uses autologous cell sources to overcome the immunogenic barriers of biomaterials. Surface coating with endothelial cells might improve hemocompatibility and thus prevent immunogenic reactions of the body. In this study this concept is applied to endothelialise a gas-permeable membrane to develop a biomimetic oxygenator test-device (ENDOXY).

Methods

ENDOXY—a multifunctional test-system was developed to endothelialise a gas-permeable membrane suitable for cell culture and to test the cell retention under shear stress and to measure gas transfer through it.

Results

Successful endothelialisation of the membrane was achieved and cells showed characteristic endothelial morphologies. They stained positive for endothelial markers. The number of cells aligned with shear stress and cell retention after blood perfusing experiments was high. Gas transfer is observed via uncoated and endothelialised membranes.

Conclusion

The study showed promising results with regard to system design, endothelialisation, and cell retention under shear stress conditions. It strongly encourages further research into the system by testing different membrane materials to design a biomimetic membrane surface and pave way for a fully hemocompatible oxygenator.

Carbonic anhydrases and their biotechnological applications

The carbonic anhydrases (CAs) are mostly zinc-containing metalloenzymes which catalyze the reversible hydration/dehydration of carbon dioxide/bicarbonate. The CAs have been extensively studied because of their broad physiological importance in all kingdoms of life and clinical relevance as drug targets. In particular, human CA isoform II (HCA II) has a catalytic efficiency of 108 M-1 s-1, approaching the diffusion limit. The high catalytic rate, relatively simple procedure of expression and purification, relative stability and extensive biophysical studies of HCA II has made it an exciting candidate to be incorporated into various biomedical applications such as artificial lungs, biosensors and CO2 sequestration systems, among others. This review highlights the current state of these applications, lists their advantages and limitations, and discusses their future development.

Artificial Placenta - Lung Assist Devices for Term and Preterm Newborns with Respiratory Failure

Respiratory insufficiency is a major cause of neonatal mortality and long-term morbidity, especially in very low birth weight infants. Today, non-invasive and mechanical ventilation are commonly accepted procedures to provide respiratory support to newborns, but they can reach their limit of efficacy. To overcome this technological plateau and further reduce mortality rates, the technology of an “artificial placenta”, which is a pumpless lung assist device connected to the umbilical vessels, would serve to expand the therapeutic spectrum when mechanical ventilation becomes inadequate to treat neonates with severe respiratory insufficiency.

The first attempts to create such an artificial placenta took place more than 60 years ago. However, there has been a recent renaissance of this concept, including developments of its major components like the oxygenator, vascular access via umbilical vessels, flow control, as well as methods to achieve hemocompatibility in extracorporeal circuits. This paper gives a review of past and current development, animal experiments and human case studies of artificial placenta technology.

Extracorporeal life support for severe adult respiratory failure

PURPOSE OF REVIEW

The past 35 years have provided a wealth of evidence that mechanical ventilation, although potentially life saving, can injure the lungs. Recent evidence suggests that limiting ventilating gas volumes can reduce patient mortality, but may result in progressive parenchymal derecruitment and alveolar hypoventilation, potentially aggravating systemic hypercarbia and hypoxemia. This review summarizes the current recommendations on a controversial, invasive technique termed 'extracorporeal life support' as a means to provide temporary pulmonary support during 'lung-protective' strategies.

RECENT FINDINGS

Extracorporeal life support has been implemented since the origins of cardiopulmonary bypass in the 1950s, but differs in several important ways from cardiopulmonary bypass, including its prolonged duration of application. Because extracorporeal life support serves only to supplement physiological derangements and is not therapeutic, patient selection critically impacts results. Whereas reversible neonatal processes such as meconium aspiration and persistent fetal circulation have fostered clinical trials demonstrating the efficacy of extracorporeal life support, adult cardiopulmonary failure extracorporeal life support trials have proved less compelling. Despite two prospective randomized trials that failed to demonstrate its efficacy, adult extracorporeal life support continues in limited centers of excellence. Adult extracorporeal life support survival rates for respiratory failure average 50% when strict criteria are met, but it remains unclear whether these results represent improved outcomes.

SUMMARY

Extracorporeal life support is an invasive technique that can provide support to the failing lung. Clinical trials have demonstrated its efficacy in neonatal and pediatric patients, but data in adults are less clear. An ongoing trial in the UK will soon address this important issue.

Towards improved artificial lungs through biocatalysis

Inefficient CO(2) removal due to limited diffusion represents a significant barrier in the development of artificial lungs and respiratory assist devices, which use hollow fiber membranes (HFMs) as the blood-gas interface and can require large blood-contacting membrane area. To offset the underlying diffusional challenge, "bioactive" HFMs that facilitate CO(2) diffusion were prepared via covalent immobilization of carbonic anhydrase (CA), an enzyme which catalyzes the conversion of bicarbonate in blood to CO(2), onto the surface of plasma-modified conventional HFMs. This study examines the impact of enzyme attachment on the diffusional properties and the rate of CO(2) removal of the bioactive membranes. Plasma deposition of surface reactive hydroxyls, to which CA could be attached, did not change gas permeance of the HFMs or generate membrane defects, as determined by scanning electron microscopy, when low plasma discharge power and short exposure times were employed. Cyanogen bromide activation of the surface hydroxyls and subsequent modification with CA resulted in near monolayer enzyme coverage (88%) on the membrane. The effect of increased plasma discharge power and exposure time on enzyme loading was negligible while gas permeance studies showed enzyme attachment did not impede CO(2) or O(2) diffusion. Furthermore, when employed in a model respiratory assist device, the bioactive membranes improved CO(2) removal rates by as much as 75% from physiological bicarbonate solutions with no enzyme leaching. These results demonstrate the potential of bioactive HFMs with immobilized CA to enhance CO(2) exchange in respiratory devices.

Can a membrane oxygenator be a model for lung NO and CO transfer?

To model lung nitric oxide (NO) and carbon monoxide (CO) uptake, a membrane oxygenator circuit was primed with horse blood flowing at 2.5 l/min. Its gas channel was ventilated with 5 parts/million NO, 0.02% CO, and 22% O2at 5 l/min. NO diffusing capacity (Dno) and CO diffusing capacity (Dco) were calculated from inlet and outlet gas concentrations and flow rates: Dno = 13.45 ml·min−1·Torr−1(SD 5.84) and Dco = 1.22 ml·min−1·Torr−1(SD 0.3). Dno and Dco increased ( P = 0.002) with blood volume/surface area. 1/Dno ( P < 0.001) and 1/Dco ( P < 0.001) increased with 1/Hb. Dno ( P = 0.01) and Dco ( P = 0.004) fell with increasing gas flow. Dno but not Dco increased with hemolysis ( P = 0.001), indicating Dno dependence on red cell diffusive resistance. The posthemolysis value for membrane diffusing capacity = 41 ml·min−1·Torr−1is the true membrane diffusing capacity of the system. No change in Dno or Dco occurred with changing blood flow rate. 1/Dco increased ( P = 0.009) with increasing Po2. Dno and Dco appear to be diffusion limited, and Dco reaction limited. In this apparatus, the red cell and plasma offer a significant barrier to NO but not CO diffusion. Applying the Roughton-Forster model yields similar specific transfer conductance of blood per milliliter for NO and CO to previous estimates. This approach allows alteration of membrane area/blood volume, blood flow, gas flow, oxygen tension, red cell integrity, and hematocrit (over a larger range than encountered clinically), while keeping other variables constant. Although structurally very different, it offers a functional model of lung NO and CO transfer.

Designing blood oxygenators

Extracorporeal blood oxygenators are used to provide cardiopulmonary support during open heart surgery. In the study reported here, mass transfer correlations were determined for commercially available blood oxygenators. Two configurations used commercially, flow outside and across bundles of hollow fibers and flow in thin channels between parallel flat sheet membranes, were investigated. Water and glycerol/water mixtures were used as a substitute for blood. Diffusion of oxygen into and out of these solutions was studied. For flow across bundles of hollow fibers, the mass transfer correlations derived here are in agreement with analogous correlations for crossflow heat exchangers. However, for flow in thin channels, the rate of mass transfer is often less than predicted from theory. This compromised mass transfer can be explained by considering slight variations in the thickness of the blood flow channels. The mass transfer correlations developed here could be used to design better blood oxygenators.