RNA LEGO: magnesium-dependent formation of specific RNA assemblies through kissing interactions

Effect of the SARS-CoV-2 Delta-associated G15U mutation on the s2m element dimerization and its interactions with miR-1307-3p

The s2m, a highly conserved 41-nt hairpin structure in the SARS-CoV-2 genome, serves as an attractive therapeutic target that may have important roles in the virus life cycle or interactions with the host. However, the conserved s2m in Delta SARS-CoV-2, a previously dominant variant characterized by high infectivity and disease severity, has received relatively less attention than that of the original SARS-CoV-2 virus. The focus of this work is to identify and define the s2m changes between Delta and SARS-CoV-2 and the subsequent impact of those changes upon the s2m dimerization and interactions with the host microRNA miR-1307-3p. Bioinformatics analysis of the GISAID database targeting the s2m element reveals a >99% correlation of a single nucleotide mutation at the 15th position (G15U) in Delta SARS-CoV-2. Based on 1H NMR spectroscopy assignments comparing the imino proton resonance region of s2m and the s2m G15U at 19°C, we show that the U15-A29 base pair closes, resulting in a stabilization of the upper stem without overall secondary structure deviation. Increased stability of the upper stem did not affect the chaperone activity of the viral N protein, as it was still able to convert the kissing dimers formed by s2m G15U into a stable duplex conformation, consistent with the s2m reference. However, we show that the s2m G15U mutation drastically impacts the binding of host miR-1307-3p. These findings demonstrate that the observed G15U mutation alters the secondary structure of s2m with subsequent impact on viral binding of host miR-1307-3p, with potential consequences on immune responses.

Structural Expansion of Catalytic RNA Nanostructures through Oligomerization of a Cyclic Trimer of Engineered Ribozymes

The multimolecular assembly of three-dimensionally structured proteins forms their quaternary structures, some of which have high geometric symmetry. The size and complexity of protein quaternary structures often increase in a hierarchical manner, with simpler, smaller structures serving as units for larger quaternary structures. In this study, we exploited oligomerization of a ribozyme cyclic trimer to achieve larger ribozyme-based RNA assembly. By installing kissing loop (KL) interacting units to one-, two-, or three-unit RNA molecules in the ribozyme trimer, we constructed dimers, open-chain oligomers, and branched oligomers of ribozyme trimer units. One type of open-chain oligomer preferentially formed a closed tetramer containing 12 component RNAs to provide 12 ribozyme units. We also observed large assembly of ribozyme trimers, which reached 1000 nm in size.

An RNA Paranemic Crossover Triangle as A 3D Module for Cotranscriptional Nanoassembly

RNA nanotechnology takes advantage of structural modularity to build self-assembling nano-architectures with applications in medicine and synthetic biology. The use of paranemic motifs, that form without unfolding existing secondary structure, allows for the creation of RNA nanostructures that are compatible with cotranscriptional folding in vitro and in vivo. In previous work, kissing-loop (KL) motifs have been widely used to design RNA nanostructures that fold cotranscriptionally. However, the paranemic crossover (PX) motif has not yet been explored for cotranscriptional RNA origami architectures and information about the structural geometry of the motif is unknown. Here, a six base pair-wide paranemic RNA interaction that arranges double helices in a perpendicular manner is introduced, allowing for the generation of a new and versatile building block: the paranemic-crossover triangle (PXT). The PXT is self-assembled by cotranscriptional folding and characterized by cryogenic electron microscopy, revealing for the first time an RNA PX interaction in high structural detail. The PXT is used as a building block for the construction of multimers that form filaments and rings and a duplicated PXT motif is used as a building block to self-assemble cubic structures, demonstrating the PXT as a rigid self-folding domain for the development of wireframe RNA origami architectures.

Structural, Dynamical, and Entropic Differences between SARS-CoV and SARS-CoV-2 s2m Elements Using Molecular Dynamics Simulations

The functional role of the highly conserved stem-loop II motif (s2m) in SARS-CoV and SARS-CoV-2 in the viral lifecycle remains enigmatic and an intense area of research. Structure and dynamics of the s2m are key to establishing a structure-function connection, yet a full set of atomistic resolution coordinates is not available for SARS-CoV-2 s2m. Our work constructs three-dimensional coordinates consistent with NMR solution phase data for SARS-CoV-2 s2m and provides a comparative analysis with its counterpart SARS-CoV s2m. We employed initial coordinates based on PDB ID 1XJR for SARS-CoV s2m and two models for SARS-CoV-2 s2m: one based on 1XJR in which we introduced the mutations present in SARS-CoV-2 s2m and the second based on the available SARS-CoV-2 NMR NOE data supplemented with knowledge-based methods. For each of the three systems, 3.5 μs molecular dynamics simulations were used to sample the structure and dynamics, and principal component analysis (PCA) reduced the ensembles to hierarchal conformational substates for detailed analysis. Dilute solution simulations of SARS-CoV s2m demonstrate that the GNRA-like terminal pentaloop is rigidly defined by base stacking uniquely positioned for possible kissing dimer formation. However, the SARS-CoV-2 s2m simulation did not retain the reported crystallographic SARS-CoV motifs and the terminal loop expands to a highly dynamic "nonaloop." Increased flexibility and structural disorganization are observed for the larger terminal loop, where an entropic penalty is computed to explain the experimentally observed reduction in kissing complex formation. Overall, both SARS-CoV and SARS-CoV-2 s2m elements have a similarly pronounced L-shape due to different motif interactions. Our study establishes the atomistic three-dimensional structure and uncovers dynamic differences that arise from s2m sequence changes, which sets the stage for the interrogation of different mechanistic pathways of suspected biological function.

Self-Assembled Nucleic Acid Nanostructures for Biomedical Applications

Structural DNA nanotechnology has been developed into a powerful method for creating self-assembled nanomaterials. Their compatibility with biosystems, nanoscale addressability, and programmable dynamic features make them appealing candidates for biomedical research. This review paper focuses on DNA self-assembly strategies and designer nanostructures with custom functions for biomedical applications. Specifically, we review the development of DNA self-assembly methods, from simple DNA motifs consisting of a few DNA strands to complex DNA architectures assembled by DNA origami. Three advantages are discussed using structural DNA nanotechnology for biomedical applications: (1) precise spatial control, (2) molding and guiding other biomolecules, and (3) using reconfigurable DNA nanodevices to overcome biomedical challenges. Finally, we discuss the challenges and opportunities of employing DNA nanotechnology for biomedical applications, emphasizing diverse assembly strategies to create a custom DNA nanostructure with desired functions.

Highly conserved s2m element of SARS-CoV-2 dimerizes via a kissing complex and interacts with host miRNA-1307-3p

The ongoing COVID-19 pandemic highlights the necessity for a more fundamental understanding of the coronavirus life cycle. The causative agent of the disease, SARS-CoV-2, is being studied extensively from a structural standpoint in order to gain insight into key molecular mechanisms required for its survival. Contained within the untranslated regions of the SARS-CoV-2 genome are various conserved stem-loop elements that are believed to function in RNA replication, viral protein translation, and discontinuous transcription. While the majority of these regions are variable in sequence, a 41-nucleotide s2m element within the genome 3' untranslated region is highly conserved among coronaviruses and three other viral families. In this study, we demonstrate that the SARS-CoV-2 s2m element dimerizes by forming an intermediate homodimeric kissing complex structure that is subsequently converted to a thermodynamically stable duplex conformation. This process is aided by the viral nucleocapsid protein, potentially indicating a role in mediating genome dimerization. Furthermore, we demonstrate that the s2m element interacts with multiple copies of host cellular microRNA (miRNA) 1307-3p. Taken together, our results highlight the potential significance of the dimer structures formed by the s2m element in key biological processes and implicate the motif as a possible therapeutic drug target for COVID-19 and other coronavirus-related diseases.

Progress toward SHAPE Constrained Computational Prediction of Tertiary Interactions in RNA Structure

As more sequencing data accumulate and novel puzzling genetic regulations are discovered, the need for accurate automated modeling of RNA structure increases. RNA structure modeling from chemical probing experiments has made tremendous progress, however accurately predicting large RNA structures is still challenging for several reasons: RNA are inherently flexible and often adopt many energetically similar structures, which are not reliably distinguished by the available, incomplete thermodynamic model. Moreover, computationally, the problem is aggravated by the relevance of pseudoknots and non-canonical base pairs, which are hardly predicted efficiently. To identify nucleotides involved in pseudoknots and non-canonical interactions, we scrutinized the SHAPE reactivity of each nucleotide of the 188 nt long lariat-capping ribozyme under multiple conditions. Reactivities analyzed in the light of the X-ray structure were shown to report accurately the nucleotide status. Those that seemed paradoxical were rationalized by the nucleotide behavior along molecular dynamic simulations. We show that valuable information on intricate interactions can be deduced from probing with different reagents, and in the presence or absence of Mg²⁺. Furthermore, probing at increasing temperature was remarkably efficient at pointing to non-canonical interactions and pseudoknot pairings. The possibilities of following such strategies to inform structure modeling software are discussed.

Near-Atomic Fabrication with Nucleic Acids

Nucleic acids hold great promise for bottom-up construction of nanostructures via programmable self-assembly. Especially, the emerging of advanced sequence design principles and the maturation of chemical synthesis of nucleic acids together have led to the rapid development of structural DNA/RNA nanotechnology. Diverse nucleic acids-based nano objects and patterns have been constructed with near-atomic resolutions and with controllable sizes and geometries. The monodispersed distribution of objects, the up-to-submillimeter scalability of patterns, and the excellent feasibility of carrying other materials with spatial and temporal resolutions have made DNA/RNA assemblies extremely unique in molecular engineering. In this review, we summarize recent advances in nucleic acids-based (mainly DNA-based) near-atomic fabrication by focusing on state-of-the-art design techniques, toolkits for DNA/RNA nanoengineering, and related applications in a range of areas.

Branched kissing loops for the construction of diverse RNA homooligomeric nanostructures

In biological systems, large and complex structures are often assembled from multiple simpler identical subunits. This strategy-homooligomerization-allows efficient genetic encoding of structures and avoids the need to control the stoichiometry of multiple distinct units. It also allows the minimal number of distinct subunits when designing artificial nucleic acid structures. Here, we present a robust self-assembly system in which homooligomerizable tiles are formed from intramolecularly folded RNA single strands. Tiles are linked through an artificially designed branched kissing-loop motif, involving Watson-Crick base pairing between the single-stranded regions of a bulged helix and a hairpin loop. By adjusting the tile geometry to gain control over the curvature, torsion and the number of helices, we have constructed 16 different linear and circular structures, including a finite-sized three-dimensional cage. We further demonstrate cotranscriptional self-assembly of tiles based on branched kissing loops, and show that tiles inserted into a transfer RNA scaffold can be overexpressed in bacterial cells.

Single-stranded DNA and RNA origami

Self-folding of an information-carrying polymer into a defined structure is foundational to biology and offers attractive potential as a synthetic strategy. Although multicomponent self-assembly has produced complex synthetic nanostructures, unimolecular folding has seen limited progress. We describe a framework to design and synthesize a single DNA or RNA strand to self-fold into a complex yet unknotted structure that approximates an arbitrary user-prescribed shape. We experimentally construct diverse multikilobase single-stranded structures, including a ~10,000-nucleotide (nt) DNA structure and a ~6000-nt RNA structure. We demonstrate facile replication of the strand in vitro and in living cells. The work here thus establishes unimolecular folding as a general strategy for constructing complex and replicable nucleic acid nanostructures, and expands the design space and material scalability for bottom-up nanotechnology.

Nucleic Acid Engineering: RNA Following the Trail of DNA

The self-assembly feature of the naturally occurring biopolymer, DNA, has fascinated researchers in the fields of materials science and bioengineering. With the improved understanding of the chemical and structural nature of DNA, DNA-based constructs have been designed and fabricated from two-dimensional arbitrary shapes to reconfigurable three-dimensional nanodevices. Although DNA has been used successfully as a building block in a finely organized and controlled manner, its applications need to be explored. Hence, with the myriad of biological functions, RNA has recently attracted considerable attention to further the application of nucleic acid-based structures. This Review categorizes different approaches of engineering nucleic acid-based structures and introduces the concepts, principles, and applications of each technique, focusing on how DNA engineering is applied as a guide to RNA engineering.

DNA-DNA kissing complexes as a new tool for the assembly of DNA nanostructures

Kissing-loop annealing of nucleic acids occurs in nature in several viruses and in prokaryotic replication, among other circumstances. Nucleobases of two nucleic acid strands (loops) interact with each other, although the two strands cannot wrap around each other completely because of the adjacent double-stranded regions (stems). In this study, we exploited DNA kissing-loop interaction for nanotechnological application. We functionalized the vertices of DNA tetrahedrons with DNA stem-loop sequences. The complementary loop sequence design allowed the hybridization of different tetrahedrons via kissing-loop interaction, which might be further exploited for nanotechnology applications like cargo transport and logical elements. Importantly, we were able to manipulate the stability of those kissing-loop complexes based on the choice and concentration of cations, the temperature and the number of complementary loops per tetrahedron either at the same or at different vertices. Moreover, variations in loop sequences allowed the characterization of necessary sequences within the loop as well as additional stability control of the kissing complexes. Therefore, the properties of the presented nanostructures make them an important tool for DNA nanotechnology.

Single-molecule conformational dynamics of a biologically functional hydroxocobalamin riboswitch

Riboswitches represent a family of highly structured regulatory elements found primarily in the leader sequences of bacterial mRNAs. They function as molecular switches capable of altering gene expression; commonly, this occurs via a conformational change in a regulatory element of a riboswitch that results from ligand binding in the aptamer domain. Numerous studies have investigated the ligand binding process, but little is known about the structural changes in the regulatory element. A mechanistic description of both processes is essential for deeply understanding how riboswitches modulate gene expression. This task is greatly facilitated by studying all aspects of riboswitch structure/dynamics/function in the same model system. To this end, single-molecule fluorescence resonance energy transfer (smFRET) techniques have been used to directly observe the conformational dynamics of a hydroxocobalamin (HyCbl) binding riboswitch (env8HyCbl) with a known crystallographic structure.1 The single-molecule RNA construct studied in this work is unique in that it contains all of the structural elements both necessary and sufficient for regulation of gene expression in a biological context. The results of this investigation reveal that the undocking rate constant associated with the disruption of a long-range kissing-loop (KL) interaction is substantially decreased when the ligand is bound to the RNA, resulting in a preferential stabilization of the docked conformation. Notably, the formation of this tertiary KL interaction directly sequesters the Shine-Dalgarno sequence (i.e., the ribosome binding site) via base-pairing, thus preventing translation initiation. These results reveal that the conformational dynamics of this regulatory switch are quantitatively described by a four-state kinetic model, whereby ligand binding promotes formation of the KL interaction. The results of complementary cell-based gene expression experiments conducted in Escherichia coli are highly correlated with the smFRET results, suggesting that KL formation is directly responsible for regulating gene expression.

Nanostructured RNAs for RNA interference

We synthesized three types of nanostructured RNAs that induce RNA interference (RNAi): branched RNAs, dumbbell-shaped RNA, and circular double-stranded RNAs. All three nanostructured RNAs were transformed into double-stranded RNA of approximately 20 base pairs when they were treated with nuclease enzymes such as Dicer. These dsRNA species induced gene silencing when they are were introduced into mammalian cells.

A single-stranded architecture for cotranscriptional folding of RNA nanostructures

Artificial DNA and RNA structures have been used as scaffolds for a variety of nanoscale devices. In comparison to DNA structures, RNA structures have been limited in size, but they also have advantages: RNA can fold during transcription and thus can be genetically encoded and expressed in cells. We introduce an architecture for designing artificial RNA structures that fold from a single strand, in which arrays of antiparallel RNA helices are precisely organized by RNA tertiary motifs and a new type of crossover pattern. We constructed RNA tiles that assemble into hexagonal lattices and demonstrated that lattices can be made by annealing and/or cotranscriptional folding. Tiles can be scaled up to 660 nucleotides in length, reaching a size comparable to that of large natural ribozymes.

RNA tectonics (tectoRNA) for RNA nanostructure design and its application in synthetic biology

RNA molecules are versatile biomaterials that act not only as DNA-like genetic materials but also have diverse functions in regulation of cellular biosystems. RNA is capable of regulating gene expression by sequence-specific hybridization. This feature allows the design of RNA-based artificial gene regulators (riboregulators). RNA can also build complex two-dimensional (2D) and 3D nanostructures, which afford protein-like functions and make RNA an attractive material for nanobiotechnology. RNA tectonics is a methodology in RNA nanobiotechnology for the design and construction of RNA nanostructures/nanoobjects through controlled self-assembly of modular RNA units (tectoRNAs). RNA nanostructures designed according to the concept of RNA tectonics are also attractive as tools in synthetic biology, but in vivo RNA tectonics is still in the early stages. This review presents a summary of the achievements of RNA tectonics and its related researches in vitro, and also introduces recent developments that facilitated the use of RNA nanostructures in bacterial cells.

RNA dimerization plays a role in ribosomal frameshifting of the SARS coronavirus

Messenger RNA encoded signals that are involved in programmed -1 ribosomal frameshifting (-1 PRF) are typically two-stemmed hairpin (H)-type pseudoknots (pks). We previously described an unusual three-stemmed pseudoknot from the severe acute respiratory syndrome (SARS) coronavirus (CoV) that stimulated -1 PRF. The conserved existence of a third stem–loop suggested an important hitherto unknown function. Here we present new information describing structure and function of the third stem of the SARS pseudoknot. We uncovered RNA dimerization through a palindromic sequence embedded in the SARS-CoV Stem 3. Further in vitro analysis revealed that SARS-CoV RNA dimers assemble through ‘kissing’ loop–loop interactions. We also show that loop–loop kissing complex formation becomes more efficient at physiological temperature and in the presence of magnesium. When the palindromic sequence was mutated, in vitro RNA dimerization was abolished, and frameshifting was reduced from 15 to 5.7%. Furthermore, the inability to dimerize caused by the silent codon change in Stem 3 of SARS-CoV changed the viral growth kinetics and affected the levels of genomic and subgenomic RNA in infected cells. These results suggest that the homodimeric RNA complex formed by the SARS pseudoknot occurs in the cellular environment and that loop–loop kissing interactions involving Stem 3 modulate -1 PRF and play a role in subgenomic and full-length RNA synthesis.

The effect of topology on the structure and free energy landscape of DNA kissing complexes

We use a recently developed coarse-grained model for DNA to study kissing complexes formed by hybridization of complementary hairpin loops. The binding of the loops is topologically constrained because their linking number must remain constant. By studying systems with linking numbers -1, 0, or 1 we show that the average number of interstrand base pairs is larger when the topology is more favourable for the right-handed wrapping of strands around each other. The thermodynamic stability of the kissing complex also decreases when the linking number changes from -1 to 0 to 1. The structures of the kissing complexes typically involve two intermolecular helices that coaxially stack with the hairpin stems at a parallel four-way junction.

Synthetic RNA-protein complex shaped like an equilateral triangle

Synthetic nanostructures consisting of biomacromolecules such as nucleic acids have been constructed using bottom-up approaches. In particular, Watson-Crick base pairing has been used to construct a variety of two- and three-dimensional DNA nanostructures. Here, we show that RNA and the ribosomal protein L7Ae can form a nanostructure shaped like an equilateral triangle that consists of three proteins bound to an RNA scaffold. The construction of the complex relies on the proteins binding to kink-turn (K-turn) motifs in the RNA, which allows the RNA to bend by ∼ 60° at three positions to form a triangle. Functional RNA-protein complexes constructed with this approach could have applications in nanomedicine and synthetic biology.

A polyhedron made of tRNAs

Supra-molecular assembly is a powerful strategy used by nature for building nano-scale architectures with predefined sizes and shapes. Numerous challenges remain however to be solved in order to demonstrate precise control over the synthesis, folding and assembly of rationally designed three-dimensional (3D) nano-objects made of RNA. Using the transfer RNA molecule as a structural building block, we report the design, efficient synthesis and structural characterization of stable, modular 3D particles adopting the polyhedral geometry of a non-uniform square antiprism. The spatial control within the final architecture allows precise positioning and encapsulation of proteins. This work demonstrates that a remarkable degree of structural control can be achieved with RNA structural motifs to build thermostable 3D nano-architectures that do not rely on helix bundles or tensegrity. RNA 3D particles can potentially be used as carriers or scaffolds in nano-medicine and synthetic biology.

Identification of antisense RNA stem-loops that inhibit RNA-protein interactions using a bacterial reporter system

Many well-characterized examples of antisense RNAs from prokaryotic systems involve hybridization of the looped regions of stem–loop RNAs, presumably due to the high thermodynamic stability of the resulting loop–loop and loop–linear interactions. In this study, the identification of RNA stem–loops that inhibit U1A protein binding to the hpII RNA through RNA–RNA interactions was attempted using a bacterial reporter system based on phage λ N-mediated antitermination. As a result, loop sequences possessing 7–8 base complementarity to the 5′ region of the boxA element important for functional antitermination complex formation, but not the U1 hpII loop, were identified. In vitro and in vivo mutational analysis strongly suggested that the selected loop sequences were binding to the boxA region, and that the structure of the antisense stem–loop was important for optimal inhibitory activity. Next, in an attempt to demonstrate the ability to inhibit the interaction between the U1A protein and the hpII RNA, the rational design of an RNA stem–loop that inhibits U1A-binding to a modified hpII was carried out. Moderate inhibitory activity was observed, showing that it is possible to design and select antisense RNA stem–loops that disrupt various types of RNA–protein interactions.

The dawn of the RNA World: toward functional complexity through ligation of random RNA oligomers

A main unsolved problem in the RNA World scenario for the origin of life is how a template-dependent RNA polymerase ribozyme emerged from short RNA oligomers obtained by random polymerization on mineral surfaces. A number of computational studies have shown that the structural repertoire yielded by that process is dominated by topologically simple structures, notably hairpin-like ones. A fraction of these could display RNA ligase activity and catalyze the assembly of larger, eventually functional RNA molecules retaining their previous modular structure: molecular complexity increases but template replication is absent. This allows us to build up a stepwise model of ligation-based, modular evolution that could pave the way to the emergence of a ribozyme with RNA replicase activity, step at which information-driven Darwinian evolution would be triggered.

Square-shaped RNA particles from different RNA folds

The structural information encoding specific conformations of natural RNAs can be implemented within artificial RNA sequences to control both three-dimensional (3D) shape and self-assembling interfaces for nanotechnology and synthetic biology applications. We have identified three natural RNA motifs known to direct helical topology into approximately 90 degrees bends: a five-way tRNA junction, a three-way junction, and a two-helix bend. These three motifs, embedded within rationally designed RNAs (tectoRNA), were chosen for generating square-shaped tetrameric RNA nanoparticles. The ability of each motif to direct the formation of supramolecular assemblies was compared by both native gel assays and atomic force microscopy. While there are multiple structural solutions for building square-shaped RNA particles, differences in the thermodynamics and molecular dynamics of the 90 degrees motif can lead to different biophysical behaviors for the resulting supramolecular complexes. We demonstrate via structural assembly programming how the different 90 degrees motifs can preferentially direct the formation of either 2D or 3D assemblies.

Synthetic biology with RNA motifs

Structural motifs in naturally occurring RNAs and RNPs can be employed as new molecular parts for synthetic biology to facilitate the development of novel devices and systems that modulate cellular functions. In this review, we focus on the following: (i) experimental evolution techniques of RNA molecules in vitro and (ii) their applications for regulating gene expression systems in vivo. For experimental evolution, new artificial RNA aptamers and RNA enzymes (ribozymes) have been selected in vitro. These functional RNA molecules are likely to be applicable in the reprogramming of existing gene regulatory systems. Furthermore, they may be used for designing hypothetical RNA-based living systems in the so-called RNA world. For the regulation of gene expressions in living cells, the development of new riboswitches allows us to modulate the target gene expression in a tailor-made manner. Moreover, recently RNA-based synthetic genetic circuits have been reported by employing functional RNA molecules, expanding the repertory of synthetic biology with RNA motifs.

Apical loop-internal loop RNA pseudoknots: a new type of stimulator of -1 translational frameshifting in bacteria

Nearly all members of a widespread family of bacterial transposable elements related to insertion sequence 3 (IS3), therefore called the IS3 family, very likely use programmed -1 ribosomal frameshifting to produce their transposase, a protein required for mobility. Comparative analysis of the potential frameshift signals in this family suggested that most of the insertion sequences from the IS51 group contain in their mRNA an elaborate pseudoknot that could act as a recoding stimulator. It results from a specific intramolecular interaction between an apical loop and an internal loop from two stem-loop structures. Directed mutagenesis, chemical probing, and gel mobility assays of the frameshift region of one element from the IS51 group, IS3411, provided clear evidences of the existence of the predicted structure. Modeling was used to generate a three-dimensional molecular representation of the apical loop-internal loop complex. We could demonstrate that mutations affecting the stability of the structure reduce both frameshifting and transposition, thus establishing the biological importance of this new type of RNA structure for the control of transposition level.

Protocols for the in silico design of RNA nanostructures

Recent developments in the field of nanobiology have significantly expanded the possibilities for new modalities in the treatment of many diseases, including cancer. Ribonucleic acid (RNA) represents a relatively new molecular material for the development of these biologically oriented nanodevices. In addition, RNA nanobiology presents a relatively new approach for the development of RNA-based nanoparticles that can be used as crystallization substrates and scaffolds for RNA-based nanoarrays. Presented in this chapter are some methodological shaped-based protocols for the design of such RNA nanostructures. Included are descriptions and background materials describing protocols that use a database of three-dimensional RNA structure motifs; designed RNA secondary structure motifs; and a combination of the two approaches. An example is also given illustrating one of the protocols.

Aminoglycoside binding to the HIV-1 RNA dimerization initiation site: thermodynamics and effect on the kissing-loop to duplex conversion

Owing to a striking, and most likely fortuitous, structural and sequence similarity with the bacterial 16 S ribosomal A site, the RNA kissing-loop complex formed by the HIV-1 genomic RNA dimerization initiation site (DIS) specifically binds 4,5-disubstituted 2-deoxystreptamine (2-DOS) aminoglycoside antibiotics. We used chemical probing, molecular modeling, isothermal titration calorimetry (ITC) and UV melting to investigate aminoglycoside binding to the DIS loop–loop complex. We showed that apramycin, an aminoglycoside containing a bicyclic moiety, also binds the DIS, but in a different way than 4,5-disubstituted 2-DOS aminoglycosides. The determination of thermodynamic parameters for various aminoglycosides revealed the role of the different rings in the drug–RNA interaction. Surprisingly, we found that the affinity of lividomycin and neomycin for the DIS (K_d ∼ 30 nM) is significantly higher than that obtained in the same experimental conditions for their natural target, the bacterial A site (K_d ∼ 1.6 µM). In good agreement with their respective affinity, aminoglycoside increase the melting temperature of the loop–loop interaction and also block the conversion from kissing-loop complex to extended duplex. Taken together, our data might be useful for selecting new molecules with improved specificity and affinity toward the HIV-1 DIS RNA.

Guanine tetrad and palindromic sequence play critical roles in the RNA dimerization of bovine foamy virus

Retroviruses are unique in having a diploid genome. However, the RNA sequences and structures that link the two RNA molecules are different. To identify the dimer linkage site of bovine foamy virus (BFV), complementary DNAs were used to interfere with RNA dimerization of BFV. We found that two sites, designated SI and SII, within a 53-base RNA fragment, were essential for BFV dimerization in vitro. SI consists of a potential guanine tetrad (GGGGC), which overlaps the primer binding site, while SII contains 15 nucleotides including a palindromic sequence, UCCCUAGGGA. Masking either of the sites completely abolished RNA dimer formation. Furthermore, a deletion of SII was introduced into a BFV infectious DNA clone; we found that deletion of SII significantly increased expression of BFV transactivator Borf-1. Interestingly, we also found that this deletion abolished viral infectivity. These results suggest that dimerization might play a unique role in the BFV life cycle.

Computational design of an RNA hexagonal nanoring and an RNA nanotube

The combination of computer modeling, RNA structure versatility, and siRNA function can be efficiently used to design an all-RNA nanoparticle capable of siRNA delivery. Here, we present a computational design of an RNA nanoring and a nanotube. An RNA nanoring consists of six simple linear building blocks that are assembled together via known noncovalent loop-loop contacts based on RNAI/RNAII inverse sequences. The helical sequences of the building blocks can include siRNAs for drug delivery.

The architectonics of programmable RNA and DNA nanostructures

The past several years have witnessed the emergence of a new world of nucleic-acid-based architectures with highly predictable and programmable self-assembly properties. For almost two decades, DNA has been the primary material for nucleic acid nanoconstruction. More recently, the dramatic increase in RNA structural information led to the development of RNA architectonics, the scientific study of the principles of RNA architecture with the aim of constructing RNA nanostructures of any arbitrary size and shape. The remarkable modularity and the distinct but complementary nature of RNA and DNA nanomaterials are revealed by the various self-assembly strategies that aim to achieve control of the arrangement of matter at a nanoscale level.

An efficient thermally induced RNA conformational switch as a framework for the functionalization of RNA nanostructures

RNA offers a variety of interactions and dynamic conformational switches not available with DNA that may be exploited for the construction of nanomolecular structures. Here, we show how the RNA loop-loop, or "kissing", interaction can be used to construct specific circular RNA arrangements that are capable of thermal isomerization to alternative structures. We also show how this thermally induced structural rearrangement can be used to unmask a functional RNA structure, in this case, a peptide-binding RNA structure, the Rev-response element (RRE) of HIV, thereby acting as a functional peptide-binding switch. The relative ease with which the RRE could be engineered into the RNA substrates suggested that a variety of functional RNA structures may be introduced. In addition, the structural rearrangement was extremely efficient, showing that the "kissing" complexes described in this study may provide a useful framework for the construction of functional RNA-based nanostructures, as well as aid in our understanding of the way RNA functions in biological systems.

Controlling RNA self-assembly to form filaments

Fundamental control over supra-molecular self-assembly for organization of matter on the nano-scale is a major objective of nanoscience and nanotechnology. 'RNA tectonics' is the design of modular RNA units, called tectoRNAs, that can be programmed to self-assemble into novel nano- and meso-scopic architectures of desired size and shape. We report the three-dimensional design of tectoRNAs incorporating modular 4-way junction (4WJ) motifs, hairpin loops and their cognate loop-receptors to create extended, programmable interaction interfaces. Specific and directional RNA-RNA interactions at these interfaces enable conformational, topological and orientational control of tectoRNA self-assembly. The interacting motifs are precisely positioned within the helical arms of the 4WJ to program assembly from only one helical stacking conformation of the 4WJ. TectoRNAs programmed to assemble with orientational compensation produce micrometer-scale RNA filaments through supra-molecular equilibrium polymerization. As visualized by transmission electron microscopy, these RNA filaments resemble actin filaments from the protein world. This work emphasizes the potential of RNA as a scaffold for designing and engineering new controllable biomaterials mimicking modern cytoskeletal proteins.

Assessment of adenyl residue reactivity within model nucleic acids by surface enhanced Raman spectroscopy

We rank the reactivity of the adenyl residues (A) of model DNA and RNA molecules with electropositive subnano size [Ag]n+ sites as a function of nucleic acid primary sequences and secondary structures and in the presence of biological amounts of Cl- and Na+ or Mg2+ ions. In these conditions A is markedly more reactive than any other nucleic acid bases. A reactivity is higher in ribo (r) than in deoxyribo (d) species [pA>pdA and (pA)n>>(pdA)n]. Base pairing decreases A reactivity in corresponding duplexes but much less in r than in d. In linear single and paired dCAG or dGAC loci, base stacking inhibits A reactivity even if A is bulged or mispaired (A.A). dA tracts are highly reactive only when dilution prevents self-association and duplex structures. In d hairpins the solvent-exposed A residues are reactive in CAG and GAC triloops and even more in ATC loops. Among the eight rG1N2R3A4 loops, those bearing a single A (A4) are the least reactive. The solvent-exposed A2 is reactive, but synergistic structural transitions make the initially stacked A residues of any rGNAA loop much more reactive. Mg2+ cross-bridging single strands via phosphates may screen A reactivity. In contrast d duplexes cross-bridging enables "A flipping" much more in rA.U pairs than in dA.T. Mg2+ promotes A reactivity in unpaired strands. For hairpins Mg2+ binding stabilizes the stems, but according to A position in the loops, A reactivity may be abolished, reduced, or enhanced. It is emphasized that not only accessibility but also local flexibility, concerted docking, and cation and anion binding control A reactivity.

Polymorphism of bulged-out residues in HIV-1 RNA DIS kissing complex and structure comparison with solution studies

All retroviruses encapsidate their genome as a dimer of homologous single-stranded RNAs. The dimerization initiation site (DIS) of human immunodeficiency virus type 1 (HIV-1) is located in the 5'-untranslated region of the viral genome and consists of a hairpin with a 6 nt self-complementary loop sequence. Genomic RNA dimerization, a crucial step for virion infectivity, is promoted by the formation of a loop-loop complex (or kissing complex) between two DIS hairpins. Crystal structures for the subtypes A, B and F of the HIV-1 DIS kissing complex have now been solved at 2.3 A, 1.9 A and 1.6 A, respectively. They revealed a polymorphism of bulged-out residues showing clearly that their conformation is not a mere consequence of crystal packing. They also provide more insights into ion binding, hydration, and RNA conformation and flexibility. In particular, we observed the binding of spermine to the loop-loop helix, which displaced a magnesium cation important for subtype A DIS dimerization. The excellent agreement between X-ray structures and the results of chemical probing and interference data on larger viral RNA fragments shows that the crystal structures are relevant for the DIS kissing complex present in solution and in viral particles. Accordingly, these structures will be helpful for designing new drugs derived from aminoglycoside antibiotics and targeted against the RNA dimerization step of the viral life-cycle.

Building programmable jigsaw puzzles with RNA

One challenge in supramolecular chemistry is the design of versatile, self-assembling building blocks to attain total control of arrangement of matter at a molecular level. We have achieved reliable prediction and design of the three-dimensional structure of artificial RNA building blocks to generate molecular jigsaw puzzle units called tectosquares. They can be programmed with control over their geometry, topology, directionality, and addressability to algorithmically self-assemble into a variety of complex nanoscopic fabrics with predefined periodic and aperiodic patterns and finite dimensions. This work emphasizes the modular and hierarchical characteristics of RNA by showing that small RNA structural motifs can code the precise topology of large molecular architectures. It demonstrates that fully addressable materials based on RNA can be synthesized and provides insights into self-assembly processes involving large populations of RNA molecules.

Site-specific incorporation of a photo-crosslinking component into RNA by T7 transcription mediated by unnatural base pairs

A photo-sensitive ribonucleotide of 5-iodo-2-oxo(1H) pyridine (Iy) capable of site-specific incorporation into transcripts was developed. The site-specific Iy incorporation into RNA was achieved by T7 transcription mediated by unnatural base pairing between Iy and its partner, 2-amino-6-(2-thienyl)purine (s). By this specific transcription, Iy was incorporated into an anti(Raf-1) RNA aptamer, which binds to human Raf-1 and inhibits the interaction between Raf-1 and Ras. Protein-dependent photo-dimerization of the aptamer was observed when Iy was located at specific positions in the aptamer, showing that the site-specific incorporation of the photo-sensitive component into RNA achieves highly specific crosslinking. This specific transcription mediated by the unnatural base pair would be a powerful tool for generating high-affinity RNA ligands and for analyzing RNA-RNA and RNA-protein interactions, as well as for constructing RNA-based nanostructures.

Characterization of tectoRNA assembly with cationic conjugated polymers

Association between RNAs with preprogrammed molecular recognition units can be quantified by using cationic, water-soluble conjugated polymers. The method uses a fluorophore-labeled probe RNA (RNA-F*), which is treated with a target structure (RNA-T). Heterodimer formation, (RNA-T/RNA-F*), increases the total negative charge on the F*-bearing macromolecule and reduces the number of negatively charged molecules (relative to unbound RNA-T+ RNA-F*). On the basis of electrostatic interactions, we anticipated more effective binding between CCP and (RNAT/RNA-F*), a reduction of the average CCP- - -F* distance, and more effective FRET upon excitation of the conjugated polymer. The resulting signals benefit from the optical amplification characteristic of emissive conjugated polymers. Solution dissociation constants can be determined by monitoring F* intensity changes as a function of [RNA-F*] and the ratio: [I(T) - I(NB)]/I(NB), where I(T) and I(NB) are the F* intensities in the presence of the target RNA (RNA-T) and a nonbinding RNA (RNA-NB), respectively, while keeping the concentration of the conjugated polymer constant. By focusing on [I(T) - I(NB)]/I(NB) as a function of RNA concentration, one can detect the concentration range wherein increased fluorescence is the result of dimerization.

RNA as multitude/RNA as one

In the configurations formed by RNA and its ions there are structural possibilities not yet realized; some are hinted at in new work on the binding of an amino acid analog.