Crystal structure of colicin E3: implications for cell entry and ribosome inactivation

Remotely Controllable Engineered Bacteria for Targeted Therapy of Pseudomonas aeruginosa Infection

Pseudomonas aeruginosa (P. aeruginosa) infection has become an intractable problem worldwide due to the decreasing efficacy of the mainstay therapy, antibiotic treatment. Hence, exploring new drugs and therapies to address this issue is crucial. Here, we construct a chimeric pyocin (ChPy) to specifically kill P. aeruginosa and engineer a near-infrared (NIR) light-responsive strain to produce and deliver this drug. Our engineered bacterial strain can continuously produce ChPy in the absence of light and release it to kill P. aeruginosa via remotely and precisely controlled bacterial lysis induced by NIR light. We demonstrate that our engineered bacterial strain is effective in P. aeruginosa-infected wound therapy in the mouse model, as it eradicated PAO1 in mouse wounds and shortened the wound healing time. Our work presents a potentially spatiotemporal and noninvasively controlled therapeutic strategy of engineered bacteria for the targeted treatment of P. aeruginosa infections.

Engineering Escherichia coli to produce and secrete colicins for rapid and selective biofilm cell killing

Bacterial biofilms are associated with chronic infectious diseases and are highly resistant to conventional antibiotics. Antimicrobial bacteriocins are alternatives to conventional antibiotics and are characterized by unique cell-killing mechanisms, including pore formation on cell membranes, nuclease activity, and cell wall synthesis inhibition. Here, we used cell-free protein synthesis to rapidly evaluate the anti-biofilm activities of colicins E1, E2, and E3. We found that E2 (with DNase activity) most effectively killed target biofilm cells (i.e., the K361 strain) while leaving non-targeted biofilms intact. We then engineered probiotic Escherichia coli microorganisms with genetic circuits to controllably synthesize and secrete colicin E2, which successfully inhibited biofilms and killed pre-formed indicator biofilms. Our findings suggest that colicins rapidly and selectively kill target biofilm cells in multispecies biofilms and demonstrate the potential of using microorganisms engineered to produce antimicrobial colicin proteins as live therapeutic strategies to treat biofilm-associated infections.

Porin threading drives receptor disengagement and establishes active colicin transport through Escherichia coli OmpF

Bacteria deploy weapons to kill their neighbours during competition for resources and to aid survival within microbiomes. Colicins were the first such antibacterial system identified, yet how these bacteriocins cross the outer membrane (OM) of Escherichia coli is unknown. Here, by solving the structures of translocation intermediates via cryo‐EM and by imaging toxin import, we uncover the mechanism by which the Tol‐dependent nuclease colicin E9 (ColE9) crosses the bacterial OM. We show that threading of ColE9’s disordered N‐terminal domain through two pores of the trimeric porin OmpF causes the colicin to disengage from its primary receptor, BtuB, and reorganises the translocon either side of the membrane. Subsequent import of ColE9 through the lumen of a single OmpF subunit is driven by the proton‐motive force, which is delivered by the TolQ‐TolR‐TolA‐TolB assembly. Our study answers longstanding questions, such as why OmpF is a better translocator than OmpC, and reconciles the mechanisms by which both Tol‐ and Ton‐dependent bacteriocins cross the bacterial outer membrane.

Structural design principles for specific ultra-high affinity interactions between colicins/pyocins and immunity proteins

The interactions of the antibiotic proteins colicins/pyocins with immunity proteins is a seminal model system for studying protein–protein interactions and specificity. Yet, a precise and quantitative determination of which structural elements and residues determine their binding affinity and specificity is still lacking. Here, we used comparative structure-based energy calculations to map residues that substantially contribute to interactions across native and engineered complexes of colicins/pyocins and immunity proteins. We show that the immunity protein α1–α2 motif is a unique structurally-dissimilar element that restricts interaction specificity towards all colicins/pyocins, in both engineered and native complexes. This motif combines with a diverse and extensive array of electrostatic/polar interactions that enable the exquisite specificity that characterizes these interactions while achieving ultra-high affinity. Surprisingly, the divergence of these contributing colicin residues is reciprocal to residue conservation in immunity proteins. The structurally-dissimilar immunity protein α1–α2 motif is recognized by divergent colicins similarly, while the conserved immunity protein α3 helix interacts with diverse colicin residues. Electrostatics thus plays a key role in setting interaction specificity across all colicins and immunity proteins. Our analysis and resulting residue-level maps illuminate the molecular basis for these protein–protein interactions, with implications for drug development and rational engineering of these interfaces.

Pyocin S5 Import into Pseudomonas aeruginosa Reveals a Generic Mode of Bacteriocin Transport

Pyocin S5 (PyoS5) is a potent protein bacteriocin that eradicates the human pathogen Pseudomonas aeruginosa in animal infection models, but its import mechanism is poorly understood. Here, using crystallography, biophysical and biochemical analyses, and live-cell imaging, we define the entry process of PyoS5 and reveal links to the transport mechanisms of other bacteriocins. In addition to its C-terminal pore-forming domain, elongated PyoS5 comprises two novel tandemly repeated kinked 3-helix bundle domains that structure-based alignments identify as key import domains in other pyocins. The central domain binds the lipid-bound common polysaccharide antigen, allowing the pyocin to accumulate on the cell surface. The N-terminal domain binds the ferric pyochelin transporter FptA while its associated disordered region binds the inner membrane protein TonB1, which together drive import of the bacteriocin across the outer membrane. Finally, we identify the minimal requirements for sensitizing Escherichia coli toward PyoS5, as well as other pyocins, and suggest that a generic pathway likely underpins the import of all TonB-dependent bacteriocins across the outer membrane of Gram-negative bacteria.IMPORTANCE Bacteriocins are toxic polypeptides made by bacteria to kill their competitors, making them interesting as potential antibiotics. Here, we reveal unsuspected commonalities in bacteriocin uptake pathways, through molecular and cellular dissection of the import pathway for the pore-forming bacteriocin pyocin S5 (PyoS5), which targets Pseudomonas aeruginosa In addition to its C-terminal pore-forming domain, PyoS5 is composed of two tandemly repeated helical domains that we also identify in other pyocins. Functional analyses demonstrate that they have distinct roles in the import process. One recognizes conserved sugars projected from the surface, while the other recognizes a specific outer membrane siderophore transporter, FptA, in the case of PyoS5. Through engineering of Escherichia coli cells, we show that pyocins can be readily repurposed to kill other species. This suggests basic ground rules for the outer membrane translocation step that likely apply to many bacteriocins targeting Gram-negative bacteria.

Optimizing Cell-Free Protein Synthesis for Increased Yield and Activity of Colicins

Colicins are antimicrobial proteins produced by Escherichia coli that hold great promise as viable complements or alternatives to antibiotics. Cell-free protein synthesis (CFPS) is a useful production platform for toxic proteins because it eliminates the need to maintain cell viability, a common problem in cell-based production. Previously, we demonstrated that colicins produced by CFPS based on crude Escherichia coli lysates are effective in eradicating antibiotic-tolerant bacteria known as persisters. However, we also found that some colicins have poor solubility or low cell-killing activity. In this study, we improved the solubility of colicin M from 16% to nearly 100% by producing it in chaperone-enriched E. coli extracts, resulting in enhanced cell-killing activity. We also improved the cytotoxicity of colicin E3 by adding or co-expressing the E3 immunity protein during the CFPS reaction, suggesting that the E3 immunity protein enhances colicin E3 activity in addition to protecting the host strain. Finally, we confirmed our previous finding that active colicins can be rapidly synthesized by observing colicin E1 production over time in CFPS. Within three hours of CFPS incubation, colicin E1 reached its maximum production yield and maintained high cytotoxicity during longer incubations up to 20 h. Taken together, our findings indicate that colicin production can be easily optimized for improved solubility and activity using the CFPS platform.

Tools and Approaches for Dissecting Protein Bacteriocin Import in Gram-Negative Bacteria

Bacteriocins of Gram-negative bacteria are typically multi-domain proteins that target and kill bacteria of the same or closely related species. There is increasing interest in protein bacteriocin import; from a fundamental perspective to understand how folded proteins are imported into bacteria and from an applications perspective as species-specific antibiotics to combat multidrug resistant bacteria. In order to translocate across the cell envelope and cause cell death, protein bacteriocins hijack nutrient uptake pathways. Their import is energized by parasitizing intermembrane protein complexes coupled to the proton motive force, which delivers a toxic domain into the cell. A plethora of genetic, structural, biochemical, and biophysical methods have been applied to find cell envelope components involved in bacteriocin import since their discovery almost a century ago. Here, we review the various approaches that now exist for investigating how protein bacteriocins translocate into Gram-negative bacteria and highlight areas of research that will need methodological innovations to fully understand this process. We also highlight recent studies demonstrating how bacteriocins can be used to probe organization and architecture of the Gram-negative cell envelope itself.

Similarities and Differences between Colicin and Filamentous Phage Uptake by Bacterial Cells

Gram-negative bacteria have evolved a complex envelope to adapt and survive in a broad range of ecological niches. This physical barrier is the first line of defense against noxious compounds and viral particles called bacteriophages. Colicins are a family of bactericidal proteins produced by and toxic to Escherichia coli and closely related bacteria. Filamentous phages have a complex structure, composed of at least five capsid proteins assembled in a long thread-shaped particle, that protects the viral DNA. Despite their difference in size and complexity, group A colicins and filamentous phages both parasitize multiprotein complexes of their sensitive host for entry. They first bind to a receptor located at the surface of the target bacteria before specifically recruiting components of the Tol system to cross the outer membrane and find their way through the periplasm. The Tol system is thought to use the proton motive force of the inner membrane to maintain outer membrane integrity during the life cycle of the cell. This review describes the sequential docking mechanisms of group A colicins and filamentous phages during their uptake by their bacterial host, with a specific focus on the translocation step, promoted by interactions with the Tol system.

On mechanisms of colicin import: the outer membrane quandary

Current problems in the understanding of colicin import across the Escherichia coli outer membrane (OM), involving a range of cytotoxic mechanisms, are discussed: (I) Crystal structure analysis of colicin E3 (RNAase) with bound OM vitamin B₁₂ receptor, BtuB, and of the N-terminal translocation (T) domain of E3 and E9 (DNAase) inserted into the OM OmpF porin, provide details of the initial interaction of the colicin central receptor (R)- and N-terminal T-domain with OM receptors/translocators. (II) Features of the translocon include: (a) high-affinity (K _d ≈ 10^-9 M) binding of the E3 receptor-binding R-domain E3 to BtuB; (b) insertion of disordered colicin N-terminal domain into the OmpF trimer; (c) binding of the N-terminus, documented for colicin E9, to the TolB protein on the periplasmic side of OmpF. Reinsertion of the colicin N-terminus into the second of the three pores in OmpF implies a colicin anchor site on the periplasmic side of OmpF. (III) Studies on the insertion of nuclease colicins into the cytoplasmic compartment imply that translocation proceeds via the C-terminal catalytic domain, proposed here to insert through the unoccupied third pore of the OmpF trimer, consistent with in vitro occlusion of OmpF channels by the isolated E3 C-terminal domain. (IV) Discussion of channel-forming colicins focuses mainly on colicin E1 for which BtuB is receptor and the OM TolC protein the proposed translocator. The ability of TolC, part of a multidrug efflux pump, for which there is no precedent for an import function, to provide a trans-periplasmic import pathway for colicin E1, is questioned on the basis of an unfavorable hairpin conformation of colicin N-terminal peptides inserted into TolC.

Bacterial antagonism in host-associated microbial communities

Antagonistic interactions are abundant in microbial communities and contribute not only to the composition and relative proportions of their members but also to the longer-term stability of a community. This Review will largely focus on bacterial antagonism mediated by ribosomally synthesized peptides and proteins produced by members of host-associated microbial communities. We discuss recent findings on their diversity, functions, and ecological impacts. These systems play key roles in ecosystem defense, pathogen invasion, spatial segregation, and diversity but also confer indirect gains to the aggressor from products released by killed cells. Investigations into antagonistic bacterial interactions are important for our understanding of how the microbiota establish within hosts, influence health and disease, and offer insights into potential translational applications.

Crystal structure of the central and the C-terminal RNase domains of colicin D implicated its translocation pathway through inner membrane of target cell

Colicins are protein toxins produced by and toxic to Escherichia coli strains. Colicin D consists of an N-terminal domain (NTD), central domain (CD) and C-terminal RNase domain (CRD). The cognate immunity protein, ImmD, is co-synthesized in producer cells to block the toxic tRNase activity of the CRD. Previous studies have reported the crystal structure of CRD/ImmD complex. Colicin D hijacks the surface receptor FepA and the energy transducer TonB system using the NTD for translocation across the outer membrane of the target cells. The CD is required for endoproteolytic processing and the translocation of CRD across the inner membrane, and the membrane-associated protease FtsH and the signal peptidase LepB are exploited in this process. Although several regions of the CD have been identified in interactions with the hijacked inner membrane system or immunity protein, the structural basis of the CD is unknown. In this study, we determined the crystal structure of colicin D, containing both the CD and CRD. The full-length colicin D/ImmD heterodimer structure was built by superimposing the CD-CRD structure with the previously determined partial structures. The overall translocation process of colicin D, including the interaction between CD and LepB, is discussed.

In silico characterization of the global Geobacillus and Parageobacillus secretome

Background

Geobacillus and Parageobacillus are two ecologically diverse thermophilic genera within the phylum Firmicutes. These taxa have long been of biotechnological interest due to their ability to secrete thermostable enzymes and other biomolecules that have direct applications in various industrial and clinical fields. Despite the commercial and industrial interest in these microorganisms, the full scope of the secreted protein, i.e. the secretome, of Geobacillus and Parageobacillus species remains largely unexplored, with most studies focusing on single enzymes. A genome-wide exploration of the global secretome can provide a platform for understanding the extracellular functional “protein cloud” and the roles that secreted proteins play in the survival and adaptation of these biotechnologically relevant organisms.

Results

In the present study, the global secretion profile of 64 Geobacillus and Parageobacillus strains, comprising 772 distinct proteins, was predicted using comparative genomic approaches. Thirty-one of these proteins are shared across all strains used in this study and function in cell-wall/membrane biogenesis as well as transport and metabolism of carbohydrates, amino acids and inorganic ions. An analysis of the clustering patterns of the secretomes of the 64 strains according to shared functional orthology revealed a correlation between the secreted profiles of different strains and their phylogeny, with Geobacillus and Parageobacillus species forming two distinct functional clades.

Conclusions

The in silico characterization of the global secretome revealed a metabolically diverse set of secreted proteins, which include proteases, glycoside hydrolases, nutrient binding proteins and toxins.

Electronic supplementary material

The online version of this article (10.1186/s12934-018-1005-9) contains supplementary material, which is available to authorized users.

Engineering microbes for targeted strikes against human pathogens

Lack of pathogen specificity in antimicrobial therapy causes non-discriminant microbial cell killing that disrupts the microflora present. As a result, potentially helpful microbial cells are killed along with the pathogen, altering the biodiversity and dynamic interactions within the population. Moreover, the unwarranted exposure of antibiotics to microbes increases the likelihood of developing resistance and perpetuates the emergence of multidrug resistance. Synthetic biology offers an alternative solution where specificity can be conferred to reduce the non-specific, non-targeted activity of currently available antibiotics, and instead provides targeted therapy against specific pathogens and minimising collateral damage to the host's inherent microbiota. With a greater understanding of the microbiome and the available genetic engineering tools for microbial cells, it is possible to devise antimicrobial strategies for novel antimicrobial therapy that are able to precisely and selectively remove infectious pathogens. Herein, we review the strategies developed by unlocking some of the natural mechanisms used by the microbes and how these may be utilised in targeted antimicrobial therapy, with the promise of reducing the current global bane of multidrug antimicrobial resistance.

Lipopolysaccharides promote binding and unfolding of the antibacterial colicin E3 rRNAse domain

Nuclease colicins are antibacterial proteins produced by certain strains of E. coli to reduce competition from rival strains. These colicins are generally organized with an N-terminal transport (T)-domain, a central receptor binding (R)-domain, and a C-terminal cytotoxic nuclease domain. These colicins are always produced in complex with an inhibitory immunity protein, which dissociates prior entrance of the cytotoxic domain in the target cell. How exactly colicins traverse the cell envelope is not understood, yet this knowledge is important for the design of new antibacterial therapies. In this report, we find that the cytotoxic rRNAse domain of colicin E3, lacking both T- and R-domains, is sufficient to inhibit cell growth provided the immunity protein Im3 has been removed. Thus, while the T-domain is needed for dissociation of Im3, the rRNAse alone can associate to the cell surface without R-domain. Accordingly, we find a high affinity interaction (Kd ~1-2μM) between the rRNAse domain and lipopolysaccharides (LPS). Furthermore, we show that binding of ColE3 to LPS destabilizes the secondary structure of the toxin, which is expectedly crucial for transport through the narrow pore of the porin OmpF. The effect of LPS on binding and unfolding of ColE3 may be indicative of a broader role of LPS for transport of colicins in general.

The Colicin E1 TolC Box: Identification of a Domain Required for Colicin E1 Cytotoxicity and TolC Binding

Colicins are protein toxins made by Escherichia coli to kill related bacteria that compete for scarce resources. All colicins must cross the target cell outer membrane in order to reach their intracellular targets. Normally, the first step in the intoxication process is the tight binding of the colicin to an outer membrane receptor protein via its central receptor-binding domain. It is shown here that for one colicin, E1, that step, although it greatly increases the efficiency of killing, is not absolutely necessary. For colicin E1, the second step, translocation, relies on the outer membrane/transperiplasmic protein TolC. The normal role of TolC in bacteria is as an essential component of a family of tripartite drug and toxin exporters, but for colicin E1, it is essential for its import. Colicin E1 and some N-terminal translocation domain peptides had been shown previously to bind in vitro to TolC and occlude channels made by TolC in planar lipid bilayer membranes. Here, a set of increasingly shorter colicin E1 translocation domain peptides was shown to bind to Escherichia coli in vivo and protect them from subsequent challenge by colicin E1. A segment of only 21 residues, the "TolC box," was thereby defined; that segment is essential for colicin E1 cytotoxicity and for binding of translocation domain peptides to TolC.

IMPORTANCE

The Escherichia coli outer membrane/transperiplasmic protein TolC is normally an essential component of the bacterium's tripartite drug and toxin export machinery. The protein toxin colicin E1 instead uses TolC for its import into the cells that it kills, thereby subverting its normal role. Increasingly shorter constructs of the colicin's N-terminal translocation domain were used to define an essential 21-residue segment that is required for both colicin cytotoxicity and for binding of the colicin's translocation domain to bacteria, in order to protect them from subsequent challenge by active colicin E1. Thus, an essential TolC binding sequence of colicin E1 was identified and may ultimately lead to the development of drugs to block the bacterial drug export pathway.

The Colicin E1 TolC-Binding Conformer: Pillar or Pore Function of TolC in Colicin Import?

The mechanism by which the drug export protein TolC is utilized for import of the cytotoxin colicin E1 across the outer membrane and periplasmic space is addressed. Studies of the initial binding of colicin E1 with TolC, occlusion of membrane-incorporated TolC ion channels, and the structure underlying the colicin-TolC complex were based on the interactions with TolC of individual colicin translocation domain (T-domain) peptides from a set of 19 that span different segments of the T-domain. These studies led to identification of a short 20-residue segment 101-120, a "TolC box", located near the center of the colicin T-domain, which is necessary for binding of colicin to TolC. Omission of this segment eliminated the ability of the T-domain to occlude TolC channels and to co-elute with TolC on a size-exclusion column. Far-ultraviolet circular dichroism spectral and thermal stability analysis of the structure of T-domain peptides implies (i) a helical hairpin conformation of the T-domain, (ii) the overlap of the TolC-binding site with a hinge of the helical hairpin, and (iii) a TolC-dependent stage of colicin import in which a central segment of the T-domain in a helical hairpin conformation binds to the TolC entry port following initial binding to the BtuB receptor. These studies provide the first structure-based information about the interaction of colicin E1 with the unique TolC protein. The model inferred for binding of the T-domain to TolC implies reservations about the traditional model for colicin import in which TolC functions to provide a channel for translocation of the colicin in an unfolded state across the bacterial outer membrane and a large part of the periplasmic space.

Intrinsic protein disorder could be overlooked in cocrystallization conditions: An SRCD case study

X-ray diffractometry dominates protein studies, as it can provide 3D structures of these diverse macromolecules or their molecular complexes with interacting partners: substrates, inhibitors, and/or cofactors. Here, we show that under cocrystallization conditions the results could reflect induced protein folds instead of the (partially) disordered original structures. The analysis of synchrotron radiation circular dichroism spectra revealed that the Im7 immunity protein stabilizes the native-like solution structure of unfolded NColE7 nuclease mutants via complex formation. This is consistent with the fact that among the several available crystal structures with its inhibitor or substrate, all NColE7 structures are virtually the same. Our results draw attention to the possible structural consequence of protein modifications, which is often hidden by compensational effects of intermolecular interactions. The growing evidence on the importance of protein intrinsic disorder thus, demands more extensive complementary experiments in solution phase with the unligated form of the protein of interest.

Colicins U and Y inhibit growth of Escherichia coli strains via recognition of conserved OmpA extracellular loop 1

Interactions of colicins U and Y with the OmpA (Outer membrane protein A) receptor molecule were studied using site-directed mutagenesis and colicin binding assay. A systematic mutagenesis of the colicin-susceptible OmpA sequence from Escherichia coli (OmpA_EC) to the colicin-resistant OmpA sequence from Serratia marcescens (OmpA_SM) was performed in regions corresponding to extracellular OmpA loops 1-4. Susceptibility to colicins U and Y was significantly affected by the OmpA mutation in loop 1. As with functional analysis, a decrease in binding capacity of His-tagged colicin U was found for recombinant OmpA with a mutated segment in loop 1 compared to control OmpA_EC. To verify the importance of the identified amino acid residues in OmpA loop 1, we introduced loop 1 from OmpA_EC into OmpA_SM, which resulted in the substantial increase of susceptibility to colicins U and Y. In addition, colicins U and Y were tested against a panel of 118 bacteriocin non-producing strains of four Escherichia species, including E. coli (39 strains), E. fergusonii (10 strains), E. hermannii (42 strains), and E. vulneris (27 strains). A majority (82%) of E. coli strains was susceptible to colicins U and Y. Interestingly, colicins U and Y also inhibited all of the 30 tested multidrug-resistant E. coli O25b-ST131 isolates. These findings, together with the fact that OmpA loop 1 is important for bacterial virulence and is evolutionary conserved, offer the potential of using colicins U and Y as specific anti-OmpA loop 1 directed antibacterial proteins.

Structural and biophysical analysis of nuclease protein antibiotics

Protein antibiotics (bacteriocins) are a large and diverse family of multidomain toxins that kill specific Gram-negative bacteria during intraspecies competition for resources. Our understanding of the mechanism of import of such potent toxins has increased significantly in recent years, especially with the reporting of several structures of bacteriocin domains. Less well understood is the structural biochemistry of intact bacteriocins and how these compare across bacterial species. Here, we focus on endonuclease (DNase) bacteriocins that target the genomes of Escherichia coli and Pseudomonas aeruginosa, known as E-type colicins and S-type pyocins, respectively, bound to their specific immunity (Im) proteins. First, we report the 3.2 Å structure of the DNase colicin ColE9 in complex with its ultra-high affinity Im protein, Im9. In contrast with Im3, which when bound to the ribonuclease domain of the homologous colicin ColE3 makes contact with the translocation (T) domain of the toxin, we find that Im9 makes no such contact and only interactions with the ColE9 cytotoxic domain are observed. Second, we report small-angle X-ray scattering data for two S-type DNase pyocins, S2 and AP41, into which are fitted recently determined X-ray structures for isolated domains. We find that DNase pyocins and colicins are both highly elongated molecules, even though the order of their constituent domains differs. We discuss the implications of these architectural similarities and differences in the context of the translocation mechanism of protein antibiotics through the cell envelope of Gram-negative bacteria.

Identification and functional analysis of a bacteriocin, pyocin S6, with ribonuclease activity from a Pseudomonas aeruginosa cystic fibrosis clinical isolate

S‐type pyocins are bacteriocins produced by Pseudomonas aeruginosa isolates to antagonize or kill other strains of the same species. They have a modular organization comprising a receptor‐binding domain recognizing a surface constituent of the target bacterium, a domain for translocation through the periplasm, and a killing or toxic domain with DNase, tRNase, or pore‐forming activity. Pyocins S2, S3, S4, and S5 recognize TonB‐dependent ferri‐siderophore receptors in the outer membrane. We here describe a new nuclease bacteriocin, pyocin S6, encoded in the genome of a P. aeruginosa cystic fibrosis (CF) clinical isolate, CF_PA39. Similarly to pyocins S1 and S2, the S6 toxin–immunity gene tandem was recruited to the genomic region encoding exotoxin A. The pyocin S6 receptor‐binding and translocation domains are identical to those of pyocin S1, whereas the killing domain is similar to the 16S ribonuclease domain of Escherichia coli colicin E3. The cytotoxic activity was abolished in pyocin S6 forms with a mutation in the colicin E3‐equivalent catalytic motif. The CF_PA39 S6 immunity gene displays a higher expression level than the gene encoding the killing protein, the latter being only detected when bacteria are grown under iron‐limiting conditions. In the S1‐pyocinogenic strain P. aeruginosa ATCC 25324 and pyocin S2 producer P. aeruginosa PAO1, a remnant of the pyocin S6 killing domain and an intact S6‐type immunity gene are located downstream of their respective pyocin operons. Strain PAO1 is insensitive for pyocin S6, and its S6‐type immunity gene provides protection against pyocin S6 activity. Purified pyocin S6 inhibits one‐fifth of 110 P. aeruginosa CF clinical isolates tested, showing clearer inhibition zones when the target cells are grown under iron limitation. In this panel, about half of the CF clinical isolates were found to host the S6 genes. The pyocin S6 locus is also present in the genome of some non‐CF clinical isolates.

The Stable Interaction Between Signal Peptidase LepB of Escherichia coli and Nuclease Bacteriocins Promotes Toxin Entry into the Cytoplasm

LepB is a key membrane component of the cellular secretion machinery, which releases secreted proteins into the periplasm by cleaving the inner membrane-bound leader. We showed that LepB is also an essential component of the machinery hijacked by the tRNase colicin D for its import. Here we demonstrate that this non-catalytic activity of LepB is to promote the association of the central domain of colicin D with the inner membrane before the FtsH-dependent proteolytic processing and translocation of the toxic tRNase domain into the cytoplasm. The novel structural role of LepB results in a stable interaction with colicin D, with a stoichiometry of 1:1 and a nanomolar Kd determined in vitro. LepB provides a chaperone-like function for the penetration of several nuclease-type bacteriocins into target cells. The colicin-LepB interaction is shown to require only a short peptide sequence within the central domain of these bacteriocins and to involve residues present in the short C-terminal Box E of LepB. Genomic screening identified the conserved LepB binding motif in colicin-like ORFs from 13 additional bacterial species. These findings establish a new paradigm for the functional adaptability of an essential inner-membrane enzyme.

Diversification of β-Augmentation Interactions between CDI Toxin/Immunity Proteins

Contact-dependent growth inhibition (CDI) is a widespread mechanism of inter-bacterial competition mediated by the CdiB/CdiA family of two-partner secretion proteins. CdiA effectors carry diverse C-terminal toxin domains (CdiA-CT), which are delivered into neighboring target cells to inhibit growth. CDI(+) bacteria also produce CdiI immunity proteins that bind specifically to cognate CdiA-CT toxins and protect the cell from auto-inhibition. Here, we compare the structures of homologous CdiA-CT/CdiI complexes from Escherichia coli EC869 and Yersinia pseudotuberculosis YPIII to explore the evolution of CDI toxin/immunity protein interactions. Both complexes share an unusual β-augmentation interaction, in which the toxin domain extends a β-hairpin into the immunity protein to complete a six-stranded anti-parallel sheet. However, the specific contacts differ substantially between the two complexes. The EC869 β-hairpin interacts mainly through direct H-bond and ion-pair interactions, whereas the YPIII β-hairpin pocket contains more hydrophobic contacts and a network of bridging water molecules. In accord with these differences, we find that each CdiI protein only protects target bacteria from its cognate CdiA-CT toxin. The compact β-hairpin binding pocket within the immunity protein represents a tractable system for the rationale design of small molecules to block CdiA-CT/CdiI complex formation. We synthesized a macrocyclic peptide mimic of the β-hairpin from EC869 toxin and solved its structure in complex with cognate immunity protein. These latter studies suggest that small molecules could potentially be used to disrupt CDI toxin/immunity complexes.

Reconstitution and structure of a bacterial Pnkp1-Rnl-Hen1 RNA repair complex

Ribotoxins cleave essential RNAs for cell killing, and RNA repair neutralizes the damage inflicted by ribotoxins for cell survival. Here we report a new bacterial RNA repair complex that performs RNA repair linked to immunity. This new RNA repair complex is a 270-kDa heterohexamer composed of three proteins-Pnkp1, Rnl and Hen1-that are required to repair ribotoxin-cleaved RNA in vitro. The crystal structure of the complex reveals the molecular architecture of the heterohexamer as two rhomboid-shaped ring structures of Pnkp1-Rnl-Hen1 heterotrimer fused at the Pnkp1 dimer interface. The four active sites required for RNA repair are located on the inner rim of each ring. The architecture and the locations of the active sites of the Pnkp1-Rnl-Hen1 heterohexamer suggest an ordered series of repair reactions at the broken RNA ends that confer immunity to recurrent damage.

In vivo processing of DNase colicins E2 and E7 is required for their import into the cytoplasm of target cells

DNase colicins E2 and E7, both of which appropriate the BtuB/Tol translocation machinery to cross the outer membrane, undergo a processing step as they enter the cytoplasm. This endoproteolytic cleavage is essential for their killing action. A processed form of the same size, 18.5 kDa, which corresponds to the C-terminal catalytic domain, was detected in the cytoplasm of bacteria treated with either of the two DNase colicins. The inner-membrane protease FtsH is necessary for the processing that allows the translocation of the colicin DNase domain into the cytoplasm. The processing occurs near residue D420, at the same position as the FtsH-dependent cleavage in RNase colicins E3 and D. The cleavage site is located 30 amino acids upstream of the DNase domain. In contrast, the previously reported periplasm-dependent colicin cleavage, located at R452 in colicin E2, was shown to be generated by the outer-membrane protease OmpT and we show that this cleavage is not physiologically relevant for colicin import. Residue R452, whose mutated derivatives led to toxicity defect, was shown to have no role in colicin processing and translocation, but it plays a key role in the catalytic activity, as previously reported for other DNase colicins. Membrane associated forms of colicins E2 and E7 were detected on target cells as proteinase K resistant peptides, which include both the receptor-binding and DNase domains. A similar, but much less proteinase K-resistant form was also detected with RNase colicin E3. These colicin forms are not relevant for colicin import, but their detection on the cell surface indicates that whole nuclease-colicin molecules are found in a stable association with the outer-membrane receptor BtuB of the target cells.

Colicin import into E. coli cells: a model system for insights into the import mechanisms of bacteriocins

Bacteriocins are a diverse group of ribosomally synthesized protein antibiotics produced by most bacteria. They range from small lanthipeptides produced by lactic acid bacteria to much larger multi domain proteins of Gram negative bacteria such as the colicins from Escherichia coli. For activity bacteriocins must be released from the producing cell and then bind to the surface of a sensitive cell to instigate the import process leading to cell death. For over 50years, colicins have provided a working platform for elucidating the structure/function studies of bacteriocin import and modes of action. An understanding of the processes that contribute to the delivery of a colicin molecule across two lipid membranes of the cell envelope has advanced our knowledge of protein-protein interactions (PPI), protein-lipid interactions and the role of order-disorder transitions of protein domains pertinent to protein transport. In this review, we provide an overview of the arrangement of genes that controls the synthesis and release of the mature protein. We examine the uptake processes of colicins from initial binding and sequestration of binding partners to crossing of the outer membrane, and then discuss the translocation of colicins through the cell periplasm and across the inner membrane to their cytotoxic site of action. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.

The antibacterial toxin colicin N binds to the inner core of lipopolysaccharide and close to its translocator protein

Colicins are a diverse family of large antibacterial protein toxins, secreted by and active against Escherichia coli and must cross their target cell's outer membrane barrier to kill. To achieve this, most colicins require an abundant porin (e.g. OmpF) plus a low‐copy‐number, high‐affinity, outer membrane protein receptor (e.g. BtuB). Recently, genetic screens have suggested that colicin N (ColN), which has no high‐affinity receptor, targets highly abundant lipopolysaccharide (LPS) instead. Here we reveal the details of this interaction and demonstrate that the ColN receptor‐binding domain (ColN‐R) binds to a specific region of LPS close to the membrane surface. Data from in vitro studies using calorimetry and both liquid‐ and solid‐state NMR reveal the interactions behind the in vivo requirement for a defined oligosaccharide region of LPS. Delipidated LPS (LPS^ΔLIPID) shows weaker binding; and thus full affinity requires the lipid component. The site of LPS binding means that ColN will preferably bind at the interface and thus position itself close to the surface of its translocon component, OmpF. ColN is, currently, unique among colicins in requiring LPS and, combined with previous data, this implies that the ColN translocon is distinct from those of other known colicins.

CdiA from Enterobacter cloacae delivers a toxic ribosomal RNase into target bacteria

Contact-dependent growth inhibition (CDI) is one mechanism of inter-bacterial competition. CDI(+) cells export large CdiA effector proteins, which carry a variety of C-terminal toxin domains (CdiA-CT). CdiA-CT toxins are specifically neutralized by cognate CdiI immunity proteins to protect toxin-producing cells from autoinhibition. Here, we use structure determination to elucidate the activity of a CDI toxin from Enterobacter cloacae (ECL). The structure of CdiA-CT(ECL) resembles the C-terminal nuclease domain of colicin E3, which cleaves 16S ribosomal RNA to disrupt protein synthesis. In accord with this structural homology, we show that CdiA-CT(ECL) uses the same nuclease activity to inhibit bacterial growth. Surprisingly, although colicin E3 and CdiA(ECL) carry equivalent toxin domains, the corresponding immunity proteins are unrelated in sequence, structure, and toxin-binding site. Together, these findings reveal unexpected diversity among 16S rRNases and suggest that these nucleases are robust and versatile payloads for a variety of toxin-delivery platforms.

Daring to be different: colicin N finds another way

The mechanisms by which colicins, protein toxins produced by Escherichia coli, kill other E. coli, have become much better understood in recent years. Most colicins initially bind to an outer membrane protein receptor, and then search for a separate nearby outer membrane protein translocator that serves as a pathway into target cells. Many colicins use the outer membrane porin, OmpF, as that translocator, while using a different primary receptor. Colicin N is unique among known colicins in that only OmpF had been identified as being required for uptake of the colicin and it was presumed to somehow serve as both receptor and translocator. Genetic screens also identified a number of genes required for lipopolysaccharide (LPS) synthesis as uniquely required for killing by colicin N, but not by other colicins. Johnson et al. show that the receptor-binding domain of colicin N binds to LPS, and does not require OmpF for that binding. LPS of a minimal length is required for binding, explaining the requirement for specific elements of the LPS biosynthetic pathway. For colicin N, the receptor-binding domain does not recognize a protein, but rather the most abundant component of the outer membrane itself, LPS.

Bioinformatics analysis of bacterial annexins--putative ancestral relatives of eukaryotic annexins

Annexins are Ca(2+)-binding, membrane-interacting proteins, widespread among eukaryotes, consisting usually of four structurally similar repeated domains. It is accepted that vertebrate annexins derive from a double genome duplication event. It has been postulated that a single domain annexin, if found, might represent a molecule related to the hypothetical ancestral annexin. The recent discovery of a single-domain annexin in a bacterium, Cytophaga hutchinsonii, apparently confirmed this hypothesis. Here, we present a more complex picture. Using remote sequence similarity detection tools, a survey of bacterial genomes was performed in search of annexin-like proteins. In total, we identified about thirty annexin homologues, including single-domain and multi-domain annexins, in seventeen bacterial species. The thorough search yielded, besides the known annexin homologue from C. hutchinsonii, homologues from the Bacteroidetes/Chlorobi phylum, from Gemmatimonadetes, from beta- and delta-Proteobacteria, and from Actinobacteria. The sequences of bacterial annexins exhibited remote but statistically significant similarity to sequence profiles built of the eukaryotic ones. Some bacterial annexins are equipped with additional, different domains, for example those characteristic for toxins. The variation in bacterial annexin sequences, much wider than that observed in eukaryotes, and different domain architectures suggest that annexins found in bacteria may actually descend from an ancestral bacterial annexin, from which eukaryotic annexins also originate. The hypothesis of an ancient origin of bacterial annexins has to be reconciled with the fact that remarkably few bacterial strains possess annexin genes compared to the thousands of known bacterial genomes and with the patchy, anomalous phylogenetic distribution of bacterial annexins. Thus, a massive annexin gene loss in several bacterial lineages or very divergent evolution would appear a likely explanation. Alternative evolutionary scenarios, involving horizontal gene transfer between bacteria and protozoan eukaryotes, in either direction, appear much less likely. Altogether, current evidence does not allow unequivocal judgement as to the origin of bacterial annexins.

Expression, Purification, and Functional Characterization of Atypical Xenocin, Its Immunity Protein, and Their Domains from Xenorhabdus nematophila

Xenorhabdus nematophila, a gram-negative bacterium belonging to the family Enterobacteriaceae is a natural symbiont of a soil nematode from the family Steinernematidae. In this study cloning, expression, and purification of broad range iron regulated multidomain bacteriocin called xenocin from X. nematophila (66 kDa, encoded by xcinA gene) and its multidomain immunity protein (42 kDa, encoded by ximB gene) have been done. xcinA-ximB (N' terminal 270 bp), translocation, and translocation-receptor domain of xcinA, ximB, and its hemolysin domain were cloned, expressed, and purified by single step Ni-NTA chromatography under native conditions. In the functional characterization, neutralization of xcinA toxicity by immunity domain of ximB gene was determined by endogenous assay. Exogenous toxic assays results showed that only the purified recombinant xenocin-immunity domain (10 kDa) protein complex had toxic activity. Atypical cognate immunity protein (42 kDa) of xenocin was fusion of immunity domain (10 kDa) and hemolysin domain (32 kDa). In silico analysis of immunity protein revealed its similarity with hemolysin and purine NTPase like proteins. Hemolytic activity was not observed in immunity protein or in its various domains; however, full-length immunity protein lacking Walker motif showed ATPase activity. Finally, using circular dichroism performed secondary structural analyses of all the recombinant proteins/protein complexes.

Immunity protein release from a cell-bound nuclease colicin complex requires global conformational rearrangement

Nuclease colicins bind their target receptor BtuB in the outer membrane of sensitive Escherichia coli cells in the form of a high-affinity complex with their cognate immunity proteins. The release of the immunity protein from the colicin complex is a prerequisite for cell entry of the colicin and occurs via a process that is still relatively poorly understood. We have previously shown that an energy input in the form of the cytoplasmic membrane proton motive force is required to promote immunity protein (Im9) release from the colicin E9/Im9 complex and colicin cell entry. We report here that engineering rigidity in the structured part of the colicin translocation domain via the introduction of disulfide bonds prevents immunity protein release from the colicin complex. Reduction of the disulfide bond by the addition of DTT leads to immunity protein release and resumption of activity. Similarly, the introduction of a disulfide bond in the DNase domain previously shown to abolish channel formation in planar bilayers also prevented immunity protein release. Importantly, all disulfide bonds, in the translocation as well as the DNase domain, also abolished the biological activity of the Im9-free colicin E9, the reduction of which led to a resumption of activity. Our results show, for the first time, that conformational flexibility in the structured translocation and DNase domains of a nuclease colicin is essential for immunity protein release, providing further evidence for the hypothesis that global structural rearrangement of the colicin molecule is required for disassembly of this high-affinity toxin-immunity protein complex prior to outer membrane translocation.

Translocation trumps receptor binding in colicin entry into Escherichia coli

Of the steps involved in the killing of Escherichia coli by colicins, binding to a specific outer-membrane receptor was the best understood and earliest characterized. Receptor binding was believed to be an indispensable step in colicin intoxication, coming before the less well-understood step of translocation across the outer membrane to present the killing domain to its target. In the process of identifying the translocator for colicin Ia, I created chimaeric colicins, as well as a deletion missing the entire receptor-binding domain of colicin Ia. The normal pathway for colicin Ia killing was shown to require two copies of Cir: one that serves as the primary receptor and a second copy that serves as translocator. The novel Ia colicins retain the ability to kill E. coli, even in the absence of receptor binding, as long as they can translocate via their Cir translocator. Experiments to determine whether colicin M uses a second copy of its receptor, FhuA, as its translocator were hampered by precipitation of colicin M chimaeras in inclusion bodies. Nevertheless, I show that receptor binding can be bypassed for killing, as long as a translocation pathway is maintained for colicin M. These experiments suggest that colicin M, unlike colicin Ia, may normally use a single copy of FhuA as both its receptor and its translocator. Colicin E1 can kill in the absence of receptor binding, using translocation through TolC.

How bugs kill bugs: progress and challenges in bacteriocin research

A Biochemical Society Focused Meeting on bacteriocins was held at the University of Nottingham on 16-18 July 2012 to mark the retirement of Professor Richard James and honour a scientific career of more than 30 years devoted to an understanding of the biology of colicins, bacteriocins produced by Escherichia coli. This meeting was the third leg of a triumvirate of symposia that included meetings at the Île de Bendor, France, in 1991 and the University of East Anglia, Norwich, U.K., in 1998, focused on bringing together leading experts in basic and applied bacteriocin research. The symposium which attracted 70 attendees consisted of 18 invited speakers and 22 selected oral communications spread over four themes: (i) Role of bacteriocins in bacterial ecology, (ii) Mode of action of bacteriocins, (ii) Mechanisms of bacteriocin import across the cell envelope, and (iv) Biotechnological and biomedical applications of bacteriocins. Speakers and poster presenters travelled from around the world, including the U.S.A., Japan, Asia and Europe, to showcase the latest developments in their scientific research.

Xenocin export by the flagellar type III pathway in Xenorhabdus nematophila

The xenocin operon of Xenorhabdus nematophila consists of xciA and ximB genes encoding a 64-kDa xenocin and 42-kDa immunity protein to kill competing microbes in the insect larva. The catalytic domain of xenocin has RNase activity and is responsible for its cytotoxicity. Under SOS conditions, xenocin is produced with immunity protein as a complex. Here, we show that xenocin and immunity protein complex are exported through the flagellar type III system of X. nematophila. Secretion of xenocin complex was abolished in an flhA strain but not in an fliC strain. The xenocin operon is not linked to the flagellar operon transcriptionally. The immunity protein is produced alone from a second, constitutive promoter and is targeted to the periplasm in a flagellum-independent manner. For stable expression of xenocin, coexpression of immunity protein was necessary. To examine the role of immunity protein in xenocin export, an enzymatically inactive protein was produced by site-directed mutagenesis in the active site of the catalytic domain. Toxicity was abolished in D535A and H538A variants of xenocin, which were expressed alone without an immunity domain and secreted in the culture supernatant through flagellar export. Secretion of xenocin through the flagellar pathway has important implications in the evolutionary success of X. nematophila.

Colicin A binds to a novel binding site of TolA in the Escherichia coli periplasm

Colicins are protein antibiotics produced by Escherichia coli to kill closely related non-identical competing species. They have taken advantage of the promiscuity of several proteins in the cell envelope for entry into the bacterial cell. The Tol–Pal system comprises one such ensemble of periplasmic and membrane-associated interacting proteins that links the IM (inner membrane) and OM (outer membrane) and provides the cell with a structural scaffold for cell division and energy transduction. Central to the Tol–Pal system is the TolA hub protein which forms protein–protein interactions with all other members and also with extrinsic proteins such as colicins A, E1, E2–E9 and N, and the coat proteins of the Ff family of filamentous bacteriophages. In the present paper, we review the role of TolA in the translocation of colicin A through the recently determined crystal structure of the complex of TolA with a translocation domain peptide of ColA (TA53–107), we demonstrate that TA53–107 binds to TolA at a novel binding site and compare the interactions of TolA with other colicins that use the Tol–Pal system for cell entry substantiating further the role of TolA as a periplasmic hub protein.

Pathways of colicin import: utilization of BtuB, OmpF porin and the TolC drug-export protein

Pathway I. Group A nuclease colicins parasitize and bind tightly (Kd ≤ 10−9 M) to the vitamin B12 receptor on which they diffuse laterally in the OM (outer membrane) and use their long (≥100 Å; 1 Å=0.1 nm) receptor-binding domain as a ‘fishing pole’ to locate the OmpF porin channel for translocation. Crystal structures of OmpF imply that a disordered N-terminal segment of the colicin T-domain initiates insertion. Pathway II. Colicin N does not possess a ‘fishing pole’ receptor-binding domain. Instead, it uses OmpF as the Omp (outer membrane protein) for reception and translocation, processes in which LPS (lipopolysaccharide) may also serve. Keio collection experiments defined the LPS core that is used. Pathway III. Colicin E1 utilizes the drug-export protein TolC for import. CD spectra and thermal-melting analysis predict: (i) N-terminal translocation (T) and central receptor (BtuB) -binding (R) domains are predominantly α-helical; and (ii) helical coiled-coil conformation of the R-domain is similar to that of colicins E3 and Ia. Recombinant colicin peptides spanning the N-terminal translocation domain defined TolC-binding site(s). The N-terminal 40-residue segment lacks the ordered secondary structure. Peptide 41–190 is helical (78%), co-elutes with TolC and occluded TolC channels. Driven by a trans-negative potential, peptides 82–140 and 141–190 occluded TolC channels. The use of TolC for colicin E1 import implies that the interaction of this colicin with the other Tol proteins does not occur in the periplasmic space, but rather through Tol domains in the cytoplasmic membrane, thus explaining colicin E1 cytotoxicity towards a strain in which a 234 residue periplasmic TolA segment is deleted.

Hijacking cellular functions for processing and delivery of colicins E3 and D into the cytoplasm

The mechanisms for importing colicins from the extracellular medium into Escherichia coli target cells implicate a complex cascade of interactions with host proteins. It is known that colicins interact with membrane receptors, and they may appropriate them structurally, but not functionally, as a scaffold on the surface of the target cell so that they can be translocated across the outer membrane. During the import into the periplasm, colicins parasitize functionally membrane porins and energy-transducers by mimicking their natural substrates or interacting partners. Such structural or functional parasitism also takes place during the late molecular events responsible for the processing and translocation of nuclease colicins across the inner membrane. Two different RNase colicins (D and E3) require an endoproteolytic cleavage, dependent on the inner membrane ATPase/protease FtsH, in order to transfer their C-terminal toxic domain into the cytoplasm. Moreover, the processing of colicin D necessitates a specific interaction with the signal peptidase LepB, but without appropriating the catalytic activity of this enzyme. A comparison of the differences in structural and functional organizations of these two colicins, as well as the pore-forming colicin B, is discussed in the present paper in connection with the sequential steps of their import mechanisms and the exploitation of the machinery of the target cell.

The crystal structure of the lipid II-degrading bacteriocin syringacin M suggests unexpected evolutionary relationships between colicin M-like bacteriocins

Colicin-like bacteriocins show potential as next generation antibiotics with clinical and agricultural applications. Key to these potential applications is their high potency and species specificity that enables a single pathogenic species to be targeted with minimal disturbance of the wider microbial community. Here we present the structure and function of the colicin M-like bacteriocin, syringacin M from Pseudomonas syringae pv. tomato DC3000. Syringacin M kills susceptible cells through a highly specific phosphatase activity that targets lipid II, ultimately inhibiting peptidoglycan synthesis. Comparison of the structures of syringacin M and colicin M reveals that, in addition to the expected similarity between the homologous C-terminal catalytic domains, the receptor binding domains of these proteins, which share no discernible sequence homology, share a striking structural similarity. This indicates that the generation of the novel receptor binding and species specificities of these bacteriocins has been driven by diversifying selection rather than diversifying recombination as suggested previously. Additionally, the structure of syringacin M reveals the presence of an active site calcium ion that is coordinated by a conserved aspartic acid side chain and is essential for catalytic activity. We show that mutation of this residue to alanine inactivates syringacin M and that the metal ion is absent from the structure of the mutant protein. Consistent with the presence of Ca(2+) in the active site, we show that syringacin M activity is supported by Ca(2+), along with Mg(2+) and Mn(2+), and the protein is catalytically inactive in the absence of these ions.

Identification of the catalytic residues of sequence-specific and histidine-free ribonuclease colicin E5

Colicin E5 cleaves tRNAs for Tyr, His, Asn and Asp in their anticodons to abolish protein synthesis in Escherichia coli. We previously showed how its C-terminal RNase domain, E5-CRD, recognizes the anticodon bases but the catalytic mechanism remained to be elucidated. Although the reaction products with 5'-OH and 2',3'-cyclic phosphate ends suggested a similar mechanism to those of RNases A and T1, E5-CRD does not have the His residues necessary as a catalyst in usual RNases. To identify residues important for the catalytic reaction, mutants as to all residues within 5 Å from the central phosphorus of the scissile phosphodiester bond were prepared. Evaluation of the killing activities of the mutant colicins and the RNase activities of the mutant E5-CRDs suggested direct involvement of Arg33, Lys25, Gln29 and Lys60 in the reaction. Particularly, Arg33 plays a critical role and Ile94 provides a structural support of Arg33. Crystal structure of the complex of E5-CRD(R33Q)/dGpdUp showed structural and binding functional integrity of this mutant protein, suggesting involvement of Arg33 in the catalytic reaction. The structure of the free E5-CRD, we also determined, showed great flexibility of a flap region, which facilitates the access of Lys60 to the substrate in an induced-fit manner.

Binding affects the tertiary and quaternary structures of the Shigella translocator protein IpaB and its chaperone IpgC

Shigella flexneri uses its type III secretion system (T3SS) to promote invasion of human intestinal epithelial cells as the first step in causing shigellosis, a life-threatening form of dysentery. The Shigella type III secretion apparatus (T3SA) consists of a basal body that spans the bacterial envelope and an exposed needle that injects effector proteins into target cells. The nascent Shigella T3SA needle is topped with a pentamer of the needle tip protein invasion plasmid antigen D (IpaD). Bile salts trigger recruitment of the first hydrophobic translocator protein, IpaB, to the tip complex where it senses contact with a host membrane. In the bacterial cytoplasm, IpaB exists in a complex with its chaperone IpgC. Several structures of IpgC have been determined, and we recently reported the 2.1 Å crystal structure of the N-terminal domain (IpaB(74.224)) of IpaB. Like IpgC, the IpaB N-terminal domain exists as a homodimer in solution. We now report that when the two are mixed, these homodimers dissociate and form heterodimers having a nanomolar dissociation constant. This is consistent with the equivalent complexes copurified after they had been co-expressed in Escherichia coli. Fluorescence data presented here also indicate that the N-terminal domain of IpaB possesses two regions that appear to contribute additively to chaperone binding. It is also likely that the N-terminus of IpaB adopts an alternative conformation as a result of chaperone binding. The importance of these findings within the functional context of these proteins is discussed.

The structures of coiled-coil domains from type III secretion system translocators reveal homology to pore-forming toxins

Many pathogenic Gram-negative bacteria utilize type III secretion systems (T3SSs) to alter the normal functions of target cells. Shigella flexneri uses its T3SS to invade human intestinal cells to cause bacillary dysentery (shigellosis) that is responsible for over one million deaths per year. The Shigella type III secretion apparatus is composed of a basal body spanning both bacterial membranes and an exposed oligomeric needle. Host altering effectors are secreted through this energized unidirectional conduit to promote bacterial invasion. The active needle tip complex of S. flexneri is composed of a tip protein, IpaD, and two pore-forming translocators, IpaB and IpaC. While the atomic structure of IpaD has been elucidated and studied, structural data on the hydrophobic translocators from the T3SS family remain elusive. We present here the crystal structures of a protease-stable fragment identified within the N-terminal regions of IpaB from S. flexneri and SipB from Salmonella enterica serovar Typhimurium determined at 2.1 Å and 2.8 Å limiting resolution, respectively. These newly identified domains are composed of extended-length (114 Å in IpaB and 71 Å in SipB) coiled-coil motifs that display a high degree of structural homology to one another despite the fact that they share only 21% sequence identity. Further structural comparisons also reveal substantial similarity to the coiled-coil regions of pore-forming proteins from other Gram-negative pathogens, notably, colicin Ia. This suggests that these mechanistically separate and functionally distinct membrane-targeting proteins may have diverged from a common ancestor during the course of pathogen-specific evolutionary events.

Nuclease colicins and their immunity proteins

It is more than 80 years since Gratia first described 'a remarkable antagonism between two strains of Escherichia coli'. Shown subsequently to be due to the action of proteins (or peptides) produced by one bacterium to kill closely related species with which it might be cohabiting, such bacteriocins have since been shown to be commonplace in the internecine warfare between bacteria. Bacteriocins have been studied primarily from the twin perspectives of how they shape microbial communities and how they penetrate bacteria to kill them. Here, we review the modes of action of a family of bacteriocins that cleave nucleic acid substrates in E. coli, known collectively as nuclease colicins, and the specific immunity (inhibitor) proteins that colicin-producing organisms make in order to avoid committing suicide. In a process akin to targeting in mitochondria, nuclease colicins engage in a variety of cellular associations in order to translocate their cytotoxic domains through the cell envelope to the cytoplasm. As well as informing on the process itself, the study of nuclease colicin import has also illuminated functional aspects of the host proteins they parasitize. We also review recent studies where nuclease colicins and their immunity proteins have been used as model systems for addressing fundamental problems in protein folding and protein-protein interactions, areas of biophysics that are intimately linked to the role of colicins in bacterial competition and to the import process itself.

TonB or not TonB: is that the question?

Bacteria are able to survive in low-iron environments by sequestering this metal ion from iron-containing proteins and other biomolecules such as transferrin, lactoferrin, heme, hemoglobin, or other heme-containing proteins. In addition, many bacteria secrete specific low molecular weight iron chelators termed siderophores. These iron sources are transported into the Gram-negative bacterial cell through an outer membrane receptor, a periplasmic binding protein (PBP), and an inner membrane ATP-binding cassette (ABC) transporter. In different strains the outer membrane receptors can bind and transport ferric siderophores, heme, or Fe3+ as well as vitamin B12, nickel complexes, and carbohydrates. The energy that is required for the active transport of these substrates through the outer membrane receptor is provided by the TonB/ExbB/ExbD complex, which is located in the cytoplasmic membrane. In this minireview, we will briefly examine the three-dimensional structure of TonB and the current models for the mechanism of TonB-dependent energy transduction. Additionally, the role of TonB in colicin transport will be discussed.

FtsH-dependent processing of RNase colicins D and E3 means that only the cytotoxic domains are imported into the cytoplasm

It has long been suggested that the import of nuclease colicins requires protein processing; however it had never been formally demonstrated. Here we show that two RNase colicins, E3 and D, which appropriate two different translocation machineries to cross the outer membrane (BtuB/Tol and FepA/TonB, respectively), undergo a processing step inside the cell that is essential to their killing action. We have detected the presence of the C-terminal catalytic domains of these colicins in the cytoplasm of target bacteria. The same processed forms were identified in both colicin-sensitive cells and in cells immune to colicin because of the expression of the cognate immunity protein. We demonstrate that the inner membrane protease FtsH is necessary for the processing of colicins D and E3 during their import. We also show that the signal peptidase LepB interacts directly with the central domain of colicin D in vitro and that it is a specific but not a catalytic requirement for in vivo processing of colicin D. The interaction of colicin D with LepB may ensure a stable association with the inner membrane that in turn allows the colicin recognition by FtsH. We have also shown that the outer membrane protease OmpT is responsible for alternative and distinct endoproteolytic cleavages of colicins D and E3 in vitro, presumably reflecting its known role in the bacterial defense against antimicrobial peptides. Even though the OmpT-catalyzed in vitro cleavage also liberates the catalytic domain from colicins D and E3, it is not involved in the processing of nuclease colicins during their import into the cytoplasm.

Cloning, purification, and functional characterization of Carocin S2, a ribonuclease bacteriocin produced by Pectobacterium carotovorum

Background

Most isolates of Pectobacterium carotovorum subsp. carotovorum (Pcc) produce bacteriocins. In this study, we have determined that Pcc strain F-rif-18 has a chromosomal gene encoding the low-molecular-weight bacteriocin, Carocin S2, and that this bacteriocin inhibits the growth of a closely related strain. Carocin S2 is inducible by ultraviolet radiation but not by mutagenic agents such as mitomycin C.

Results

A carocin S2-defective mutant, TF1-2, was obtained by Tn5 insertional mutagenesis using F-rif-18. A 5706-bp DNA fragment was detected by Southern blotting, selected from a genomic DNA library, and cloned to the vector, pMS2KI. Two adjacent complete open reading frames within pMS2KI were sequenced, characterized, and identified as caroS2K and caroS2I, which respectively encode the killing protein and immunity protein. Notably, carocin S2 could be expressed not only in the mutant TF1-2 but also in Escherichia coli DH5α after entry of the plasmid pMS2KI. Furthermore, the C-terminal domain of CaroS2K was homologous to the nuclease domains of colicin D and klebicin D. Moreover, SDS-PAGE analysis showed that the relative mass of CaroS2K was 85 kDa and that of CaroS2I was 10 kDa.

Conclusion

This study shown that another nuclease type of bacteriocin was found in Pectobacterium carotovorum. This new type of bacteriocin, Carocin S2, has the ribonuclease activity of CaroS2K and the immunity protein activity of CaroS2I.