Solubilization by amphiphilar aggregates

Sodium lauryl sulfate as lubricant in tablets formulations: Is it worth?

Lubricants are excipients used in tablet formulations to reduce friction and adhesion forces within the die or on the punches surface during the manufacturing process. Despite these excipients are always required for the tablets production, their amount must be carefully evaluated since lubricants can negatively impact on mechanical strength, disintegration and dissolution behavior of solid dosage forms. Alternative compounds have been suggested to overcome the issues of conventional lubricants and sodium lauryl sulfate (SDS) is one of the most promising one. Despite SDS has been object of several investigations, a definitive conclusion on its effectiveness cannot still be drawn. Particularly, its efficacy on tablets disaggregation and API dissolution is still unclear. Here, the effect of SDS on all the relevant features of tablets and tableting process has been evaluated on immediate release hydrophobic tablets formulations in comparison with conventional lubricants. The results of this investigation are quite outspoken: SDS has a low lubricant power while it determines only a limited improvement on tablets hardness. It greatly improves the tablets wettability but only on model formulations, the presence of superdisintegrants resets its effectiveness and any possible effect on tablets disaggregation. None of the tested formulations showed improvement on the API dissolution rate.

Nonane and Hexanol Adsorption in the Lamellar Phase of a Nonionic Surfactant: Molecular Simulations and Comparison to Ideal Adsorbed Solution Theory

Adsorption of n-nonane/1-hexanol (C9/C6OH) mixtures into the lamellar phase formed by a 50/50 w/w triethylene glycol mono-n-decyl ether (C10E3)/water system was studied using configurational-bias Monte Carlo simulations in the osmotic Gibbs ensemble. The interactions were described by the Shinoda-Devane-Klein coarse-grained force field. Prior simulations probing single-component adsorption indicated that C9 molecules preferentially load near the center of the bilayer, increasing the bilayer thickness, whereas C6OH molecules are more likely to be found near the interface of the polar and nonpolar moieties, swelling the bilayer in the lateral dimension. Here, we extend this work to binary C9/C6OH adsorption to probe whether the difference in the spatial preferences may lead to a synergistic effect and enhanced loadings for the mixture. Comparing loading trends and the thermodynamics of binary adsorption to unary adsorption reveals that C9-C9 interactions lead to the largest enhancement, whereas C9-C6OH and C6OH-C6OH interactions are less favorable for this bilayer system. Ideal adsorbed solution theory yields satisfactory predictions of the binary loading.

Nanomicellar Extraction of Polyphenols-Methodology and Applications Review

The selection of the appropriate extraction method is crucial, especially for the receiving of active substances from plant material. The extraction using supercritical liquids and micellar-mediated extraction (MME) is the most advantageous among the alternative methods to classical solid-liquid extraction. However, the latter seems to be the best solution when the desired actives are polar. The following article presents a comprehensive review of the micellar-mediated extraction method in the last decade. The theoretical principle of the process was also refreshed and the current state of knowledge on the applications for analytical and manufacturing purposes was summarized.

Probing Additive Loading in the Lamellar Phase of a Nonionic Surfactant: Gibbs Ensemble Monte Carlo Simulations Using the SDK Force Field

Understanding solute uptake into soft microstructured materials, such as bilayers and worm-like and spherical micelles, is of interest in the pharmaceutical, agricultural, and personal care industries. To obtain molecular-level insight on the effects of solutes loading into a lamellar phase, we utilize the Shinoda-Devane-Klein (SDK) coarse-grained force field in conjunction with configurational-bias Monte Carlo simulations in the osmotic Gibbs ensemble. The lamellar phase is comprised of a bilayer formed by triethylene glycol mono- n-decyl ether (C10E3) surfactants surrounded by water with a 50:50 surfactant/water weight ratio. We study both the unary adsorption isotherm and the effects on bilayer structure and stability caused by n-nonane, 1-hexanol, and ethyl butyrate at several different reduced reservoir pressures. The nonpolar n-nonane molecules load near the center of the bilayer. In contrast, the polar 1-hexanol and ethyl butyrate molecules both load with their polar bead close to the surfactant head groups. Near the center of the bilayer, none of the solute molecules exhibits a significant orientational preference. Solute molecules adsorbed near the polar groups of the surfactant chains show a preference for orientations perpendicular to the interface, and this alignment with the long axis of the surfactant molecules is most pronounced for 1-hexanol. Loading of n-nonane leads to an increase of the bilayer thickness, but does not affect the surface area per surfactant. Loading of polar additives leads to both lateral and transverse swelling. The reduced Henry's law constants of adsorption (expressed as a molar ratio of additive to surfactant per reduced pressure) are 0.23, 1.4, and 14 for n-nonane, 1-hexanol, and ethyl butyrate, respectively, and it appears that the SDK force field significantly overestimates the ethyl butyrate-surfactant interactions.

Swollen micelles and alcohol-surfactant co-adsorption: structures and mechanisms from liquid- and solid-state 1H-1H NMR spectroscopy

Mixtures of surfactants and medium chained alcohols display an anomalous phase behaviour, with the formation of swollen micelles in mid-range surfactant concentrations, which transition into larger non-swollen aggregates when the surfactant concentration increases above a critical point. These alcohols also affect the adsorption behaviour of the surfactants. In this study, intermolecular proximities are measured for such systems by ¹H-¹H NMR dipolar correlation experiments, giving molecular localizations. The medium chained 1-heptanol and an anionic surfactant sodium dodecyl sulphate (SDS) are studied, both solubilized and adsorbed on alumina. Nuclear Overhauser Effect Spectroscopy (NOESY) shows that 1-heptanol localizes in both the palisade layer and in the core of SDS micelles when the 1-heptanol : SDS mole ratio increases beyond 2. The micelle diameter then increases with increasing 1-heptanol : SDS mole ratios due to more 1-heptanol partitioning in the micelle interior. When the micelle diameter increases beyond ∼6 nm, some SDS moves into the micelle interior, which may be a driving force for the structural transition at higher SDS concentrations. After being adsorbed on alumina, ¹H-¹H double-quantum magic angle spinning (DQ MAS) shows that SDS/1-heptanol bilayers are formed where 1-heptanol localizes in the palisade layer only, but with slightly different localizations compared to that in micelles. Three different 1-heptanol environments are identified on the surface by ²H NMR using ²H labelled 1-heptanol. However, in contrast to in solution, no 1-heptanol adsolubilizes in the bilayer interior.

How a viscoelastic solution of wormlike micelles transforms into a microemulsion upon absorption of hydrocarbon: new insight

In this article, we investigate the effect of hydrocarbon addition on the rheological properties and structure of wormlike micellar solutions of potassium oleate. We show that a viscoelastic solution of entangled micellar chains is extremely responsive to hydrocarbons-the addition of only 0.5 wt % n-dodecane results in a drastic drop in viscosity by up to 5 orders of magnitude, which is due to the complete disruption of micelles and the formation of microemulsion droplets. We study the whole range of the transition of wormlike micelles into microemulsion droplets and discover that it can be divided into three regions: (i) in the first region, the solutions retain a high viscosity (∼10-350 Pa·s), the micelles are entangled but their length is reduced by the solubilization of hydrocarbons; (ii) in the second region, the system transitions to the unentangled regime and the viscosity sharply decreases as a result of further micelle shortening and the appearance of microemulsion droplets; (iii) in the third region, the viscosity is low (∼0.001 Pa·s) and only microemulsion droplets remain in the solution. The experimental studies were accompanied by theoretical considerations, which allowed us to reveal for the first time that (i) one of the leading mechanisms of micelle shortening is the preferential accumulation of the solubilized hydrocarbon in the spherical end caps of wormlike micelles, which makes the end caps thermodynamically more favorable; (ii) the onset of the sharp drop in viscosity is correlated with the crossover from the entangled to unentangled regime of the wormlike micellar solution taking place upon the shortening of micellar chains; and (iii) in the unentangled regime short cylindrical micelles coexist with microemulsion droplets.

Solubilisation of Oils of Different Polarity in Aqueous Solutions of Pluronic Triblock Copolymers

The micellisation behaviour of Pluronic F108 was studied as a function of the addition of various more or less polar additives, such as hexanol, geraniol, toluene, methyl heptanoate, polyproylene oxide (PPO), and nitropropane. It is observed that the critical micellisation temperature (CMT) is substantially reduced upon the solubilisation of most of the additives (but not for methyl heptanoate and PPO) and at the same time the concomitant enthalpy of micellisation becomes larger. Both changes in CMT and enthalpy of micellisation are linear with respect to the concentration of additive. The pronouncedness of this effect is related to the polarity of the additive (as characterised for instance by its water solubility) and for instance similar effects are achieved for much smaller amounts of geraniol compared to hexanol. The structural evolution of the Pluronic solutions upon addition of the additives was also followed by SANS experiments and show that relatively small amounts of added solubilisate can have a very pronounced effect on the extent of the micellisation and size of the aggregates formed, i.e., effectively lowering the CMT by rendering the amphiphilic system more hydrophobic and especially the medium chain alcohols show pronounced synergism.

Double-chain cationic surfactant and n-pentanol: an L3 phase in the rich-water domain?

A ternary system containing water, pentanol and a quaternary cationic surfactant, dioctadecyldimethylammonium bromide (DODAB) was investigated. We present the phase diagram and ESR studies that demonstrate the existence of the well-known L3 or sponge phase in the water-rich domain of the diagram. The remarkable fact is the existence of some kind of order in such diluted conditions.

Quantifying the Hydrophobic Effect. 1. A Computer Simulation−Molecular-Thermodynamic Model for the Self-Assembly of Hydrophobic and Amphiphilic Solutes in Aqueous Solution

Surfactant micellization and micellar solubilization in aqueous solution can be modeled using a molecular-thermodynamic (MT) theoretical approach; however, the implementation of MT theory requires an accurate identification of the portions of solutes (surfactants and solubilizates) that are hydrated and unhydrated in the micellar state. For simple solutes, such identification is comparatively straightforward using simple rules of thumb or group-contribution methods, but for more complex solutes, the hydration states in the micellar environment are unclear. Recently, a hybrid method was reported by these authors in which hydrated and unhydrated states are identified by atomistic simulation, with the resulting information being used to make MT predictions of micellization and micellar solubilization behavior. Although this hybrid method improves the accuracy of the MT approach for complex solutes with a minimum of computational expense, the limitation remains that individual atoms are modeled as being in only one of two states-head or tail-whereas in reality, there is a continuous spectrum of hydration states between these two limits. In the case of hydrophobic or amphiphilic solutes possessing more complex chemical structures, a new modeling approach is needed to (i) obtain quantitative information about changes in hydration that occur upon aggregate formation, (ii) quantify the hydrophobic driving force for self-assembly, and (iii) make predictions of micellization and micellar solubilization behavior. This article is the first in a series of articles introducing a new computer simulation-molecular thermodynamic (CS-MT) model that accomplishes objectives (i)-(iii) and enables prediction of micellization and micellar solubilization behaviors, which are infeasible to model directly using atomistic simulation. In this article (article 1 of the series), the CS-MT model is introduced and implemented to model simple oil aggregates of various shapes and sizes, and its predictions are compared to those of the traditional MT model. The CS-MT model is formulated to allow the prediction of the free-energy change associated with aggregate formation (gform) of solute aggregates of any shape and size by performing only two computer simulations-one of the solute in bulk water and the other of the solute in an aggregate of arbitrary shape and size. For the 15 oil systems modeled in this article, the average discrepancy between the predictions of the CS-MT model and those of the traditional MT model for gform is only 1.04%. In article 2, the CS-MT modeling approach is implemented to predict the micellization behavior of nonionic surfactants; in article 3, it is used to predict the micellization behavior of ionic and zwitterionic surfactants.

Engineered Complex Emulsion System: Toward Modulating the Pore Length and Morphological Architecture of Mesoporous Silicas

In the complex alkane/P123/TEOS/H2O emulsion system, an emulsion engineering method to modulate pore length and morphological architecture of mesoporous materials has been built. With fine tuning of the synthetic parameters (e.g., the composition of the synthetic mixtures, temperature, stirring, etc.), a series of chemically significant mesostructures (i.e., short-pore SBA-15 materials) with tunable pore length and morphological architecture have been successfully constructed. The effects of alkane solubilizates on pore length and particle morphology are discussed. The resulting short-pore materials would have potential applications in the fields of adsorption/separation of biomolecules and inclusion chemistry of guest species, etc.

Principles for microscale separations based on redox-active surfactants and electrochemical methods

We report principles for microscale separations based on selective solubilization and deposition of sparingly water-soluble compounds by an aqueous solution of a redox-active surfactant. The surfactant, (11-ferrocenylundecyl)trimethylammonium bromide, undergoes a reversible change in micellization upon oxidation or reduction. This change in aggregation is exploited in a general scheme in which micelles of reduced surfactant are formed and then put in contact with a mixture of hydrophobic compounds leading to selective solubilization of the compounds. The micelles are then electrochemically disrupted, leading to the selective deposition of their contents. We measured the selectivity of the solubilization and deposition processes using mixtures of two model drug-like compounds, o-tolueneazo-beta-naphthol (I) and 1-phenylazo-2-naphthylamine (II). By repeatedly solubilizing and depositing a mixture that initially contained equal mole fractions of each compound, we demonstrate formation of a product that contains 98.4% of I after six cycles. Because the aggregation states of redox-active surfactants are easily controlled within simple microfabricated structures, including structures that define small stationary volumes (e.g., wells of a microtiter plate) or flowing volumes of liquids (e.g., microfabricated channels), we believe these principles may be useful for the purification or analysis of compounds in microscale chemical process systems. When used for purification, these principles provide separation of surfactant and product.

Vesicle Phases with Semipolar Additives

We examined the influence of semipolar additives on the phase behavior of mixed zwitterionic surfactant/consurfactant systems. It is shown that in these systems with increasing concentration esters like hexylacetate (HA) and ketones like hexylmethylketone (HMK) can behave both like consurfactants and like hydrocarbons. In solutions of 200 mM tetradecyldimethylamineoxide (TDMAO)/cosurfactant the additives cause first a phase transformation from the micellar L(1) phase to a lamellar L(alpha) phase. Upon further increasing concentration, the L(alpha) phase is transformed into a microemulsion. The L(alpha) phase consists of densely packed multilamellar vesicles. The vesicles are shown by electron microscopy. The multilamellar character of the vesicles is also reflected in the conductivity of the phase. It is up to 10 times lower than the conductivity of the L(1) phase. In some systems the vesicles are transformed on rest into a multidomain stacked L(alpha) phase. It is furthermore demonstrated that the two-phase L(1)/L(alpha) region in these systems is very narrow. In situations where enough HA is added to be close to the boundary of the L(1) phase, it is shown that very small amounts of cosurfactant can transform the L(1) phase into the L(alpha) phase. In extreme situations 1 mM cosurfactant is sufficient for transforming the L(1) phase with 200 mM TDMAO into the L(alpha) phase. In the investigated systems the L(alpha) phase is a highly viscoelastic fluid in which the storage modulus is 1 order of magnitude larger than the loss modulus. Besides the conventional way to prepare samples by adding all ingredients and stirring the solution intensively, all investigated systems were additionally prepared without applying any shear forces. In a surfactant/cosurfactant solution the additive was brought into the sample by diffusion. The phase behavior of both types of samples showed fundamental differences in some cases, which give insight into the influence of shear forces on these systems. Copyright 2001 Academic Press.

Solubilization of Polycyclic Aromatic Compounds into n-Decyltrimethylammonium Perfluorocarboxylate Micelles

Solubilization of polycyclic aromatic compounds in aqueous dilute solutions of three cationic amphiphiles was studied. The maximum additive concentrations (MACs) of the aromatic compounds were constant below their critical micelle concentrations (cmcs) and monotonically increased above the cmcs. The first stepwise association constants (K(1)) between a solubilizate monomer and a vacant micelle were evaluated from the MACs for the solubilizates using the mass action model for solubilization into micelles in the dilute solution. The standard Gibbs energy changes of solubilization (DeltaG degrees ) were calculated from K(1), and the enthalpy and entropy changes of solubilization were estimated from the temperature dependence. MACs of each surfactant at the same surfactant concentration above the cmc were different depending on the cmc, but there was little difference in the DeltaG degrees values. Some differences appeared in the enthalpy and entropy values in accordance with their micellar size or degrees of counterion binding to micelles. DeltaG degrees for solubilization decreased linearly with carbon number of aromatic solubilizate for each micellar solution. Copyright 2000 Academic Press.