High-level expression of the mycobacterial porin MspA in Escherichia coli and purification of the recombinant protein

Evolution of Mycobacterium abscessus in the human lung: Cumulative mutations and genomic rearrangement of porin genes in patient isolates

BACKGROUND

Mycobacterium abscessus subspecies massiliense (M. massiliense) is increasingly recognized as an emerging bacterial pathogen, particularly in cystic fibrosis (CF) patients and CF centres' respiratory outbreaks. We characterized genomic and phenotypic changes in 15 serial isolates from two CF patients (1S and 2B) with chronic pulmonary M. massiliense infection leading to death, as well as four isolates from a CF centre outbreak in which patient 2B was the index case.

RESULTS

Comparative genomic analysis revealed the mutations affecting growth rate, metabolism, transport, lipids (loss of glycopeptidolipids), antibiotic susceptibility (macrolides and aminoglycosides resistance), and virulence factors. Mutations in 23S rRNA, mmpL4, porin locus and tetR genes occurred in isolates from both CF patients. Interestingly, we identified two different spontaneous mutation events at the mycobacterial porin locus: a fusion of two tandem porin paralogs in patient 1S and a partial deletion of the first porin paralog in patient 2B. These genomic changes correlated with reduced porin protein expression, diminished 14C-glucose uptake, slower bacterial growth rates, and enhanced TNF-α induction in mycobacteria-infected THP-1 human cells. Porin gene complementation of porin mutants partly restored 14C-glucose uptake, growth rate and TNF-α levels to those of intact porin strains.

CONCLUSIONS

We hypothesize that specific mutations accumulated and maintained over time in M. massiliense, including mutations shared among transmissible strains, collectively lead to more virulent, host adapted lineages in CF patients and other susceptible hosts.

Rapid and multiplex preparation of engineered Mycobacterium smegmatis porin A (MspA) nanopores for single molecule sensing and sequencing

Acknowledging its unique conical lumen structure, Mycobacterium smegmatis porin A (MspA) was the first type of nanopore that has successfully sequenced DNA. Recent developments of nanopore single molecule chemistry have also suggested MspA to be an optimum single molecule reactor. However, further investigations with this approach require heavy mutagenesis which is labor intensive and requires high end instruments for purifications. We here demonstrate an efficient and economic protocol which performs rapid and multiplex preparation of a variety of MspA mutants. The prepared MspA mutants were demonstrated in operations such as nanopore insertion, sequencing, optical single channel recording (oSCR), nanopore single molecule chemistry and nanopore rectification. The performance is no different from that of pores however prepared by other means. The time of all human operations and the cost for a single batch of preparation have been minimized to 40 min and 0.4$, respectively. This method is extremely useful in the screening of new MspA mutants, which has an urgent requirement in further investigations of new MspA nanoreactors. Its low cost and simplicity also enable efficient preparations of MspA nanopores for both industrial manufacturing and academic research.

Pathogen-specific antimicrobials engineered de novo through membrane-protein biomimicry

Precision antimicrobials aim to kill pathogens without damaging commensal bacteria in the host, and thus to cure disease without antibiotic-associated dysbiosis. Here, we report the de novo design of a synthetic host defence peptide that targets a specific pathogen by mimicking key molecular features of the pathogen’s channel-forming membrane proteins. By exploiting physical and structural vulnerabilities within the pathogen’s cellular envelope, we designed a peptide sequence that undergoes instructed tryptophan-zippered assembly within the mycolic-acid rich outer membrane of Mycobacterium tuberculosis (Mtb) to specifically kill the pathogen without collateral toxicity towards lung commensal bacteria or host tissue. These ‘mycomembrane-templated’ assemblies elicit rapid mycobactericidal activity, and enhance the potency of antibiotics by improving their otherwise poor diffusion across the rigid Mtb envelope with respect to agents that exploit transmembrane protein channels for antimycobacterial activity. This biomimetic strategy may aid the design of other narrow-spectrum antimicrobial peptides.

MspA nanopores from subunit dimers

Mycobacterium smegmatis porin A (MspA) forms an octameric channel and represents the founding member of a new family of pore proteins. Control of subunit stoichiometry is important to tailor MspA for nanotechnological applications. In this study, two MspA monomers were connected by linkers ranging from 17 to 62 amino acids in length. The oligomeric pore proteins were purified from M. smegmatis and were shown to form functional channels in lipid bilayer experiments. These results indicated that the peptide linkers did not prohibit correct folding and localization of MspA. However, expression levels were reduced by 10-fold compared to wild-type MspA. MspA is ideal for nanopore sequencing due to its unique pore geometry and its robustness. To assess the usefulness of MspA made from dimeric subunits for DNA sequencing, we linked two M1-MspA monomers, whose constriction zones were modified to enable DNA translocation. Lipid bilayer experiments demonstrated that this construct also formed functional channels. Voltage gating of MspA pores made from M1 monomers and M1-M1 dimers was identical indicating similar structural and dynamic channel properties. Glucose uptake in M. smegmatis cells lacking porins was restored by expressing the dimeric mspA M1 gene indicating correct folding and localization of M1-M1 pores in their native membrane. Single-stranded DNA hairpins produced identical ionic current blockades in pores made from monomers and subunit dimers demonstrating that M1-M1 pores are suitable for DNA sequencing. This study provides the proof of principle that production of single-chain MspA pores in M. smegmatis is feasible and paves the way for generating MspA pores with altered stoichiometries. Subunit dimers enable better control of the chemical and physical properties of the constriction zone of MspA. This approach will be valuable both in understanding transport across the outer membrane in mycobacteria and in tailoring MspA for nanopore sequencing of DNA.

Identification of outer membrane proteins of Mycobacterium tuberculosis

The cell wall of mycobacteria includes an unusual outer membrane of extremely low permeability. While Escherichia coli uses more than 60 proteins to functionalize its outer membrane, only two mycobacterial outer membrane proteins (OMPs) are known. The porin MspA of Mycobacterium smegmatis provided the proof of principle that integral mycobacterial OMPs share the beta-barrel structure, the absence of hydrophobic alpha-helices and the presence of a signal peptide with OMPs of gram-negative bacteria. These properties were exploited in a multi-step bioinformatic approach to predict OMPs of M. tuberculosis. A secondary structure analysis was performed for 587 proteins of M. tuberculosis predicted to be exported. Scores were calculated for the beta-strand content and the amphiphilicity of the beta-strands. Reference OMPs of gram-negative bacteria defined threshold values for these parameters that were met by 144 proteins of unknown function of M. tuberculosis. Two of them were verified as OMPs by a novel two-step experimental approach. Rv1698 and Rv1973 were detected only in the total membrane fraction of M. bovis BCG in Western blot experiments, while proteinase K digestion of whole cells showed the surface accessibility of these proteins. These findings established that Rv1698 and Rv1973 are indeed localized in the outer membrane and tripled the number of known OMPs of M. tuberculosis. Significantly, these results provide evidence for the usefulness of the bioinformatic approach to predict mycobacterial OMPs and indicate that M. tuberculosis likely has many OMPs with beta-barrel structure. Our findings pave the way to identify the set of proteins which functionalize the outer membrane of M. tuberculosis.

Directed evolution of ribosomal protein S1 for enhanced translational efficiency of high GC Rhodopseudomonas palustris DNA in Escherichia coli

The expression of foreign DNA in Escherichia coli is important in biotechnological applications. However, the translation of genes from GC-rich organisms is inefficient in E. coli. To overcome this problem, we applied directed evolution to E. coli ribosomal protein S1. Two selected mutants enabled 12- and 8-fold higher expression levels from GC-rich DNA targets. General improvements in translation efficiency over a range of genes from Rhodopseudomonas palustris and E. coli was achieved using an S1 mutant selected against multiple genes from R. palustris. This method opens new opportunities for the expression of GC-rich genes in E. coli.

Induction of single chain tetracycline repressor requires the binding of two inducers

In this article we report the in vivo and in vitro characterization of single chain tetracycline repressor (scTetR) variants in Escherichia coli. ScTetR is genetically and proteolytically stable and exhibits the same regulatory properties as dimeric TetR in E.coli. Urea-dependent denaturation of scTetR is independent of the protein concentration and follows the two-state model with a monophasic transition. Contrary to dimeric TetR, scTetR allows the construction of scTetR mutants, in which one subunit contains a defective inducer binding site while the other is functional. We have used this approach to establish that scTetR needs occupation of both inducer binding sites for in vivo and in vitro induction. Single mutations causing loss of induction in dimeric TetR lead to non-inducible scTetR when inserted into one half-side. The construction of scTetR H64K S135L S138I (scTetR(i2)) in which one half-side is specific for 4-dedimethylamino-anhydrotetracycline (4-ddma-atc) and the other for tetracycline (tc) leads to a protein which is only inducible by the mixture of tc and 4-ddma-atc. Fluorescence titration of scTetR(i2) with both inducers revealed distinct occupancy with each of these inducers yielding roughly a 1:1 stoichiometry of each inducer per scTetR(i2). The properties of this gain of function mutant clearly demonstrate that scTetR requires the binding of two inducers for induction of transcription.

The growth rate of Mycobacterium smegmatis depends on sufficient porin-mediated influx of nutrients

Mycobacteria have a unique outer membrane (OM) that is thicker than any other known biological membrane. Nutrients cross this permeability barrier by diffusion through porins. MspA is the major porin of Mycobacterium smegmatis. In this study we showed that three paralogues of MspA, namely MspB, MspC and MspD are also porins. However, only the mspA and mspC genes were expressed in the wild-type strain. None of the single deletion mutants displayed a significant OM permeability defect except for the mspA mutant. Deletion of the mspA gene caused activation of transcription of mspB and/or mspD in three independent strains by unknown chromosomal mutations. It is concluded that mspB and mspD provide backup porins for M. smegmatis. This also indicated that a minimal porin-mediated OM permeability is essential for survival of M. smegmatis. Electron microscopy in combination with quantitative image analysis of protein gels revealed that the number of pores per cell dropped from 2400 to 800 and 150 for the DeltamspA and DeltamspA DeltamspC mutant (ML10) respectively. The very low number of pores correlated well with the at least 20-fold lower channel activity of detergent extracts of the ML10 strain and its 15- and 75-fold lower permeability to nutrient molecules such as serine and glucose respectively. The amount of Msp porin and the OM permeability of the triple porin mutant lacking mspA, mspC and mspD was not altered. The growth rate of M. smegmatis dropped drastically with its porin-mediated OM permeability in contrast to porin mutants of Escherichia coli. These results show that porin-mediated influx of nutrients is a major determinant of the growth rate of M. smegmatis.

Expression and refolding of Omp38 from Burkholderia pseudomallei and Burkholderia thailandensis, and its function as a diffusion porin

In the present paper, we describe cloning and expression of two outer membrane proteins, BpsOmp38 (from Burkholderia pseudomallei) and BthOmp38 (from Burkholderia thailandensis) lacking signal peptide sequences, using the pET23d(+) expression vector and Escherichia coli host strain Origami(DE3). The 38 kDa proteins, expressed as insoluble inclusion bodies, were purified, solubilized in 8 M urea, and then subjected to refolding experiments. As seen on SDS/PAGE, the 38 kDa band completely migrated to approximately 110 kDa when the purified monomeric proteins were refolded in a buffer system containing 10% (w/v) Zwittergent 3-14, together with a subsequent heating to 95 degrees C for 5 min. CD spectroscopy revealed that the 110 kDa proteins contained a predominant beta-sheet structure, which corresponded completely to the structure of the Omp38 proteins isolated from B. pseudomallei and B. thailandensis. Immunoblot analysis using anti-BpsOmp38 polyclonal antibodies and peptide mass analysis by MALDI-TOF (matrix-assisted laser-desorption ionization-time-of-flight) MS confirmed that the expressed proteins were BpsOmp38 and BthOmp38. The anti-BpsOmp38 antibodies considerably exhibited the inhibitory effects on the permeation of small sugars through the Omp38-reconstituted liposomes. A linear relation between relative permeability rates and M(r) of neutral sugars and charged antibiotics suggested strongly that the in vitro re-assembled Omp38 functioned fully as a diffusion porin.

Multidrug resistance of a porin deletion mutant of Mycobacterium smegmatis

Mycobacteria contain an outer membrane of unusually low permeability which contributes to their intrinsic resistance to many agents. It is assumed that small and hydrophilic antibiotics cross the outer membrane via porins, whereas hydrophobic antibiotics may diffuse through the membrane directly. A mutant of Mycobacterium smegmatis lacking the major porin MspA was used to examine the role of the porin pathway in antibiotic sensitivity. Deletion of the mspA gene caused high-level resistance of M. smegmatis to 256 microg of ampicillin/ml by increasing the MIC 16-fold. The permeation of cephaloridine in the mspA mutant was reduced ninefold, and the resistance increased eightfold. This established a clear relationship between the activity and the outer membrane permeation of cephaloridine. Surprisingly, the MICs of the large and/or hydrophobic antibiotics vancomycin, erythromycin, and rifampin for the mspA mutant were increased 2- to 10-fold. This is in contrast to those for Escherichia coli, whose sensitivity to these agents was not affected by deletion of porin genes. Uptake of the very hydrophobic steroid chenodeoxycholate by the mspA mutant was retarded threefold, which supports the hypothesis that loss of MspA indirectly reduces the permeability by the lipid pathway. The multidrug resistance of the mspA mutant highlights the prominent role of outer membrane permeability for the sensitivity of M. smegmatis to antibiotics. An understanding of the pathways across the outer membrane is essential to the successful design of chemotherapeutic agents with activities against mycobacteria.

The porin MspA from Mycobacterium smegmatis improves growth of Mycobacterium bovis BCG

Mycobacteria are characterized by an extremely thick hydrophobic cell wall restricting the permeability for small hydrophilic compounds. Recently, a new efficient porin (MspA) has been identified in Mycobacterium smegmatis, which is lacking in slow-growing mycobacteria. Since we were interested in investigating the influence of porins on growth of slow-growing Mycobacterium bovis BCG, we inserted a 3429 bp DNA fragment from M. smegmatis carrying the mspA gene in an integrative vector and transferred it into M. bovis BCG. Expression of mspA in the BCG derivative was shown by RT-PCR and Western blot. Quantification of bacterial growth on agar plates demonstrated two- to four-fold better growth of the BCG derivative with the transferred DNA compared with the reference strain. Transposon mutagenesis proved the mspA gene to be responsible for the growth enhancement. Intracellular multiplication of the BCG derivative in the mouse macrophage cell line J774 and the human pneumocyte cell line A549 was also clearly enhanced pointing to a possible role of porins in the interaction of mycobacteria with their hosts.

The Structure of a Mycobacterial Outer-Membrane Channel

Mycobacteria have low-permeability outer membranes that render them resistant to most antibiotics. Hydrophilic nutrients can enter by way of transmembrane-channel proteins called porins. An x-ray analysis of the main porin from Mycobacterium smegmatis, MspA, revealed a homooctameric goblet-like conformation with a single central channel. This is the first structure of a mycobacterial outer-membrane protein. No structure-related protein was found in the Protein Data Bank. MspA contains two consecutive beta barrels with nonpolar outer surfaces that form a ribbon around the porin, which is too narrow to fit the thickness of the mycobacterial outer membrane in contemporary models.

Mycobacterial porins--new channel proteins in unique outer membranes

Mycobacteria protect themselves with an outer lipid bilayer, which is the thickest biological membrane hitherto known and has an exceptionally low permeability rendering mycobacteria intrinsically resistant to many antibiotics. Pore proteins spanning the outer membrane mediate the diffusion of hydrophilic nutrients. Mycobacterium tuberculosis possesses at least two porins in addition to the low activity channel protein OmpATb. OmpATb is essential for adaptation of M. tuberculosis to low pH and survival in macrophages and mice. The channel activity of OmpATb is likely to play a major role in the defence of M. tuberculosis against acidification within the phagosome of macrophages. MspA is the main porin of Mycobacterium smegmatis. It forms a tetrameric complex with a single central pore of 10 nm length and a cone-like structure. This structure differs clearly from that of the trimeric porins of Gram-negative bacteria, which form one 4 nm long pore per monomer. The 45-fold lower number of porins compared to Gram-negative bacteria and the exceptional length of the pores are two major determinants of the low permeability of the outer membrane of M. smegmatis for hydrophilic solutes. The importance of the synergism between slow transport through the porins and drug efflux or inactivation for the development of drugs against M. tuberculosis is discussed.