Solid lipid nanoparticles for drug delivery

Experimental approaches to evaluate solid lipid nanoparticle-based drug delivery systems

Solid lipid nanoparticles (SLNs) are potential drug carriers due to the several advantages they offer. The physicochemical stability of lipid carriers varies significantly due to their diverse compositions and structures. Appropriate analytical methods are required for the complete characterization of SLNs. Physicochemical characterization includes analysis of bulk properties like particle size, size distribution, zeta potential, morphology, stability, polymorphism, crystallinity, and molecular level properties like microenvironments within nanoparticles and their interactions with drugs. Moreover, drug loading, drug entrapment efficiency, and drug release kinetics are essential parameters to evaluate the efficacy of SLNs as drug delivery systems. In addition to testing the physicochemical stability and functionality of SLN formulations, it is essential to investigate their desired actions through in vivo studies, which are beyond the scope of this article. This review briefly discusses the different experimental techniques and their applications in the field of solid lipid nanoparticles. These techniques can also be used to characterize nanostructure lipid carriers, which are second-generation lipid nanoparticles.

Applications of Biomolecular Nanostructures for Anti-Angiogenic Theranostics

Angiogenesis is a physiological process of forming new blood vessels that has pathological importance in seemingly unrelated illnesses like cancer, diabetes, and various inflammatory diseases. Treatment targeting angiogenesis has shown promise for these types of diseases, but current anti-angiogenic agents have critical limitations in delivery and side-effects. This necessitates exploration of alternative approaches like biomolecule-based drugs. Proteins, lipids, and oligonucleotides have recently become popular in biomedicine, specifically as biocompatible components of therapeutic drugs. Their excellent bioavailability and potential bioactive and immunogenic properties make them prime candidates for drug discovery or drug delivery systems. Lipid-based liposomes have become standard vehicles for targeted nanoparticle (NP) delivery, while protein and nucleotide NPs show promise for environment-sensitive delivery as smart NPs. Their therapeutic applications have initially been hampered by short circulation times and difficulty of fabrication but recent developments in nanofabrication and NP engineering have found ways to circumvent these disadvantages, vastly improving the practicality of biomolecular NPs. In this review, we are going to briefly discuss how biomolecule-based NPs have improved anti-angiogenesis-based therapy.

Material and Design Toolkit for Drug Delivery: State of the Art, Trends, and Challenges

The nanomaterial and related toolkit have promising applications for improving human health and well-being. Nanobased drug delivery systems use nanoscale materials as carriers to deliver therapeutic agents in a targeted and controlled manner, and they have shown potential to address issues associated with conventional drug delivery systems. They offer benefits for treating various illnesses by encapsulating or conjugating biological agents, chemotherapeutic drugs, and immunotherapeutic agents. The potential applications of this technology are vast; however, significant challenges exist to overcome such as safety issues, toxicity, efficacy, and insufficient capacity. This article discusses the latest developments in drug delivery systems, including drug release mechanisms, material toolkits, related design molecules, and parameters. The concluding section examines the limitations and provides insights into future possibilities.

Trends in nano-platforms for the treatment of viral infectious diseases

Viral diseases have always been a major health issue, from the currently eradicated poliovirus to the still unresolved human immunodeficiency virus, and have since become a recent global threat brought about by the COVID-19 pandemic. Pathogenic viruses easily spread through various means such as contaminated food and water intake, exchange of bodily fluids, or even inhalation of airborne particles mainly due to their miniscule size. Furthermore, viral coats contain virulent proteins which trigger assimilation into target cells on contact through either direct penetration or induction of endocytosis. In some viruses their outer envelope contains masking ligands that create a means of escape from detection of immune cells. To deal with the nanometer size range and biomolecular-based invasion mechanism, nanoparticles are highly suitable for the treatment. The review highlights the progress in nanoparticle technology, particularly viral therapeutics, including therapeutic strategies and existing clinical applications.

Lipid Nanoparticles for the Posterior Eye Segment

This review highlights the application of lipid nanoparticles (Solid Lipid Nanoparticles, Nanostructured Lipid Carriers, or Lipid Drug Conjugates) as effective drug carriers for pathologies affecting the posterior ocular segment. Eye anatomy and the most relevant diseases affecting the posterior segment will be summarized. Moreover, preparation methods and different types and subtypes of lipid nanoparticles will also be reviewed. Lipid nanoparticles used as carriers to deliver drugs to the posterior eye segment as well as their administration routes, pharmaceutical forms and ocular distribution will be discussed emphasizing the different targeting strategies most recently employed for ocular drug delivery.

α-Galactosidase A Augmentation by Non-Viral Gene Therapy: Evaluation in Fabry Disease Mice

Fabry disease (FD) is a monogenic X-linked lysosomal storage disorder caused by a deficiency in the lysosomal enzyme α-Galactosidase A (α-Gal A). It is a good candidate to be treated with gene therapy, in which moderately low levels of enzyme activity should be sufficient for clinical efficacy. In the present work we have evaluated the efficacy of a non-viral vector based on solid lipid nanoparticles (SLN) to increase α-Gal A activity in an FD mouse model after intravenous administration. The SLN-based vector incremented α-Gal A activity to about 10%, 15%, 20% and 14% of the levels of the wild-type in liver, spleen, heart and kidney, respectively. In addition, the SLN-based vector significantly increased α-Gal A activity with respect to the naked pDNA used as a control in plasma, heart and kidney. The administration of a dose per week for three weeks was more effective than a single-dose administration. Administration of the SLN-based vector did not increase liver transaminases, indicative of a lack of toxicity. Additional studies are necessary to optimize the efficacy of the system; however, these results reinforce the potential of lipid-based nanocarriers to treat FD by gene therapy.

Nanocarriers-Mediated Drug Delivery Systems for Anticancer Agents: An Overview and Perspectives

Nanotechnology has been actively integrated as drug carriers over the last few years to treat various cancers. The main hurdle in the clinical management of cancer is the development of multidrug resistance against chemotherapeutic agents. To overcome the limitations of chemotherapy, the researchers have been developing technological advances for significant progress in the oncotherapy by enabling the delivery of chemotherapeutic agents at increased drug content levels to the targeted spots. Several nano-drug delivery systems designed for tumor-targeting are evaluated in preclinical and clinical trials and showed promising outcomes in cancerous tumors' clinical management. This review describes nanocarrier's importance in managing different types of cancers and emphasizing nanocarriers for drug delivery and cancer nanotherapeutics. It also highlights the recent advances in nanocarriers-based delivery systems, including polymeric nanocarriers, micelles, nanotubes, dendrimers, magnetic nanoparticles, solid lipid nanoparticles, and quantum dots (QDs). The nanocarrier-based composites are discussed in terms of their structure, characteristics, and therapeutic applications in oncology. To conclude, the challenges and future exploration opportunities of nanocarriers in chemotherapeutics are also presented.

Independent co-delivery of model actives with different degrees of hydrophilicity from oil-in-water and water-in-oil emulsions stabilised by solid lipid particles via a Pickering mechanism: a-proof-of-principle study

HYPOTHESIS

The development of vehicles for the co-encapsulation of actives with diverse characteristics and their subsequent controllable co-delivery is gaining increasing research interest. Predominantly centred around pharmaceutical applications, the majority of such co-delivery approaches have been focusing on solid formulations and less so on liquid-based systems. Simple emulsions can be designed to offer a liquid-based microstructural platform for the compartmentalised multi-delivery of actives.

EXPERIMENTS

In this work, solid lipid nanoparticle stabilised Pickering emulsions were used for the co-encapsulation/co-delivery of two model actives with different degrees of hydrophilicity. Lipid particles containing a model hydrophobic active were prepared in the presence of either Tween 20 or whey protein isolate, and were then used to stabilise water-in-oil or oil-in-water emulsions, containing a secondary model active within their dispersed phase.

FINDINGS

Solid lipid nanoparticles prepared with either type of emulsifier were able to provide stable emulsions. Release kinetic data fitting revealed that different co-delivery profiles can be achieved by controlling the surface properties of the lipid nanoparticles. The current proof-of-principle study presents preliminary data that confirm the potential of this approach to be utilised as a flexible liquid-based platform for the segregated co-encapsulation and independent co-release of different combinations of actives, either hydrophobic/hydrophilic or hydrophobic/hydrophobic, with diverse release profiles.

In vitro synergic activity of diethyldithiocarbamate and 4-nitrochalcone loaded in beeswax nanoparticles against melanoma (B16F10) cells

The use of nanoparticles as drug delivery systems to simultaneously carry several therapeutic agents is an attractive idea to create new synergic treatments and to develop the next generation of cancer therapies. Therefore, the goal of this study was the simultaneous encapsulation of a hydrophilic drug, sodium diethyldithiocarbamate (DETC), and a hydrophobic drug, 4-nitrochalcone (4NC), in beeswax nanoparticles (BNs) to evaluate the in vitro synergic activity of this combination against melanoma (B16F10) cells. BNs were prepared by water/oil/water double emulsion in the absence of organic solvents. Transmission electron microscopy imaging and dynamic light scattering analyses indicated the formation of BNs with a semispherical shape, average diameter below 250 nm, relatively narrow distributions, and negative zeta potential. The double emulsion technique proved to be effective for the simultaneous encapsulation of DETC and 4NC with efficiencies of 86.2% and 98.7%, respectively, and this encapsulation did not affect the physicochemical properties of the BNs. DETC and 4NC loaded in BNs exhibited a higher cytotoxicity toward B16F10 cells than free 4NC and DETC. This simultaneous encapsulation led to a synergic effect of DETC and 4NC on B16F10 cells, decreasing the cell viability from 46% (DETC BNs) and 54% (4NC BNs) to 64% (DETC+4NC BNs). Therefore, the IC₅₀ of DETC+4NC was also lower than that of either when individually encapsulated, and that of free DETC or 4NC. Therefore, DETC and 4NC were efficiently simultaneously encapsulated in BNs and this drug combination was able to generate an in vitro synergic therapeutic effect on B16F10 cells.

Solid lipid nanoparticles as a drug delivery system to across the blood-brain barrier

Solid lipid nanoparticles (SLNs) were prepared by biocompatible and biodegradable solid-phase lipids. β-elemene is a safe natural essential oil with broad-spectrum anti-tumor activity. However, its clinical application has been adversely affected by its poor water solubility and limited bioavailability. SLN incorporation is a potential strategy to bypass the blood-brain barrier, the most important factor limiting the bioactivity of neurotherapeutics. The SLNs-β has the same efficacy as commercially available elemene in vitro and an enhanced brain drug accumulation in vivo. The survival rate data was promising and acute toxicity experiment proved its safety. All these data suggested that SLN-β is a safe and effective drug delivery system, especially for brain tumor therapy, and warrants further development.

Nanoparticle drug delivery systems: an excellent carrier for tumor peptide vaccines

In the past 40 years, the nanoparticle drug delivery system for tumor peptide vaccines has been widely studied which also reached a splendid result. Nanomaterial can enhance the targeting of vaccines, help vaccines enter the cells and trigger immune response by themselves. They also help in increasing cellular uptake, improving permeability and efficacy. Currently, several categories of nanopreparation, such as liposome, polymeric micelle, polymeric nanoparticle, gold nanoparticle and so on, are proved that they are appropriate for peptide vaccines. This review we discussed the possible mechanisms of nanomaterial's action on the regulation of immunological functions and several major applications of this advanced drug delivery system for tumor peptide vaccine.

Anti-inflammatory and anti-cancer activity of citral: Optimization of citral-loaded solid lipid nanoparticles (SLN) using experimental factorial design and LUMiSizer®

Essential oils containing monoterpenes are widely used in pharmaceuticals and cosmetic products on account of their wide range of bioactive properties (including anti-cancer activity). Two monoterpenes (citral and geraniol) were firstly tested for their anti-inflammatory activity in a RAW 264.7 cell line, demonstrating citral to have enhanced capacity to inhibit NO production (ca. 84% for citral and 52% for geraniol at the lowest tested concentration of 5 µg/ml). As citral showed higher NO inhibitory activity than geraniol, to measure the level of cytotoxicity of citral, AlamarBlue reduction assay was run in two cell models (non-tumoral HaCaT and tumoral A431). Citral exhibited a strong cytotoxic effect in both cell lines, i.e. cell viability lower that 10% after 24 h exposure at 100 µg/ml of monoterpene. An optimized solid lipid nanoparticles (SLNs) formulation for citral was further developed by design of experiments (2² factorial design), followed by accelerated stability testing (LUMiSizer®). An optimal SLN composed of 1 wt% of citral, 4 wt% of lipid and 2.5 wt% surfactant were successfully produced by hot high pressure homogenization (hot HPH) showing a mean particle size (Z-Ave) of 97.7 nm and polydispersity index of 0.249. The produced formulations were analyzed in a high-end dispersion analyzer LUMiSizer® to characterize any demixing phenomena, demonstrating to be long-term stable at room temperature (25 °C), exhibiting very low instability indices (0.032 after production and 0.042 after one month of storage).

Optimization of linalool-loaded solid lipid nanoparticles using experimental factorial design and long-term stability studies with a new centrifugal sedimentation method

Linalool (C₁₀H₁₈O), also known as 3, 7-dimethyl-1, 6-octadien-3-ol, is the most common acyclic monoterpene tertiary alcohol present in essential oils of several aromatic plant species. Previous studies indicate that linalool is a valuable compound with a wide range of therapeutic properties. The promising therapeutic effects of linalool are however limited by its poor water solubility and volatility. Recently, the encapsulation of linalool in drug delivery systems, such as solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) has demonstrated to overcome linalool physicochemical limitations_. The present study aimed the production and optimization of linalool encapsulation in SLN applying the experimental full factorial design. The estimation of the long-term stability of the produced linalool-loaded SLN was carried out using a new centrifugal sedimentation method, LUMiSizer®. SLN dispersions were produced by the hot high pressure homogenization (HPH) method. The influence of the independent variables, surfactant and lipid concentrations on linalool-loaded SLN particle size, polydispersity index (PI) and zeta potential (ZP) was evaluated by a 2² factorial design composed of 2 variables which were set at 2-levels each. For each of the three dependent variables, analysis of the variance (ANOVA) was performed using a 95% confidence interval. The concentration of surfactant, as well as, the interaction between the different concentrations of lipid and surfactant, hada statistically significant effect on the particle size and PI. Experimental factorial design has been successfully employed to develop an optimal SLN dispersion, requiring a minimum of performed experiments. Based on the obtained results, the optimal linalool-loaded SLN dispersion was composed of 1% (w/v) linalool 2% (w/v) of solid lipid and 5% (w/v) of surfactant. Furthermore, the stability analysis revealed that the produced linalool-loaded SLN dispersions have limited storage stability which can be easily overcome through the assembly of a polymeric coating on the SLN surface. LUMiSizer® has been successfully used in the kinetic analysis of linalool-SLN during accelerated storage time.

Novel strategies for the formulation and processing of poorly water-soluble drugs

Low aqueous solubility of active pharmaceutical ingredients presents a serious challenge in the development process of new drug products. This article provides an overview on some of the current approaches for the formulation of poorly water-soluble drugs with a special focus on strategies pursued at the Center of Pharmaceutical Engineering of the TU Braunschweig. These comprise formulation in lipid-based colloidal drug delivery systems and experimental as well as computational approaches towards the efficient identification of the most suitable carrier systems. For less lipophilic substances the preparation of drug nanoparticles by milling and precipitation is investigated for instance by means of microsystem-based manufacturing techniques and with special regard to the preparation of individualized dosage forms. Another option to overcome issues with poor drug solubility is the incorporation into nanospun fibers.

A novel [Mn2(μ-(C6H5)2CHCOO)2(bipy)4](bipy)(ClO4)2 complex loaded solid lipid nanoparticles: synthesis, characterization and in vitro cytotoxicity on MCF-7 breast cancer cells

Manganese (Mn)-based complexes have been drawing attention due to the fact that they are more effective than other metal complexes. However, the use of Mn(II)-based complexes in medicine remains limited because of certain side effects. The aim of this study was to investigate the cytotoxic and apoptotic effects of a novel Mn(II) complex [Mn₂(μ-(C₆H₅)₂CHCOO)₂(bipy)₄](bipy)(ClO₄)₂ and Mn(II) complex loaded solid lipid nanoparticles (SLNs) on MCF-7 and HUVEC control cells. The average diameter of Mn(II) complex was about 1120 ± 2.43 nm, while the average particle size of Mn(II) complex-SLNs was ∼340 ± 2.27 nm. The cytotoxic effects of Mn(II) complex and Mn(II)-SLNs were 86.8 and 66.4%, respectively (p < .05). Additionally, both Mn(II) complex (39.25%) and Mn(II)-SLNs (38.05%) induced apoptosis and increased the arrest of G₀/G₁ phase. However, Mn(II) complex exerted toxic effects on the HUVEC control cell (63.4%), whereas no toxic effects was observed when treated with Mn(II)-SLNs at 150 μM. As a consequence, SLNs might be potentially used for metal-based complexes in the treatment of cancer due to reducing size and toxic effects of metal-based complexes.

Insoluble drug delivery strategies: review of recent advances and business prospects

The emerging trends in the combinatorial chemistry and drug design have led to the development of drug candidates with greater lipophilicity, high molecular weight and poor water solubility. Majority of the failures in new drug development have been attributed to poor water solubility of the drug. Issues associated with poor solubility can lead to low bioavailability resulting in suboptimal drug delivery. About 40% of drugs with market approval and nearly 90% of molecules in the discovery pipeline are poorly water-soluble. With the advent of various insoluble drug delivery technologies, the challenge to formulate poorly water soluble drugs could be achieved. Numerous drugs associated with poor solubility and low bioavailabilities have been formulated into successful drug products. Several marketed drugs were reformulated to improve efficacy, safety and patient compliance. In order to gain marketing exclusivity and patent protection for such products, revitalization of poorly soluble drugs using insoluble drug delivery technologies have been successfully adopted by many pharmaceutical companies. This review covers the recent advances in the field of insoluble drug delivery and business prospects.

In vitro and ex vivo toxicological testing of sildenafil-loaded solid lipid nanoparticles

The aim of this study was to investigate the potential cytotoxicity of solid lipid nanoparticles (SLN) loaded with sildenafil. The SLNs were tested as a new drug delivery system (DDS) for the inhalable treatment of pulmonary hypertension in human lungs. Solubility of sildenafil in SLN lipid matrix (30:70 phospholipid:triglyceride) was determined to 1% sildenafil base and 0.1% sildenafil citrate, respectively. Sildenafil-loaded SLN with particle size of approximately 180 nm and monomodal particle size distribution were successfully manufactured using a novel microchannel homogenization method and were stable up to three months. Sildenafil-loaded SLN were then used in in vitro and ex vivo models representing lung and heart tissue. For in vitro models, human alveolar epithelial cell line (A459) and mouse heart endothelium cell line (MHEC5-T) were used. For ex vivo models, rat precision cut lung slices (PCLS) and rat heart slices (PCHS) were used. All the models were treated with plain SLN and sildenafil-loaded SLN in a concentration range of 0-5000 µg/ml of lipid matrix. The toxicity was evaluated in vitro and ex vivo by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Median lethal dose 50% (LD50) values for A549 cells and PCLS were found to be in the range of 1200-1900 µg/ml while for MHEC5-T cells and precision cut heart slices values were found between 1500 and 2800 µg/ml. PCHS showed slightly higher LD50 values in comparison to PCLS. Considering the toxicological aspects, sildenafil-loaded SLN could have potential in the treatment of pulmonary hypertension via inhalation route.

Size-stable solid lipid nanoparticles loaded with Gd-DOTA for magnetic resonance imaging

Solid lipid nanoparticles (SLNs) have recently emerged as nontoxic, versatile alternatives to traditional carriers (liposomes, polymeric nanoparticles) for drug delivery. Because SLNs are composed of a solid lipid core, they offer significant protection against chemical degradation of their drug cargo and offer the potential for controlled release. SLNs also hold promise for use as targeted agents and multimodal imaging agents. Here we report the synthesis and characterization of SLNs loaded with gadolinium (1,4,7,10-tetraazacyclododecane)-1,4,7,10-tetraacetate (Gd-DOTA) in order to produce a new category of stable T1-weighted (T1w) magnetic resonance imaging (MRI) contrast agents. Systematically varying components in the SLN synthesis, we demonstrated an increase in Gd-DOTA incorporation and an increase in longitudinal relaxivity (r1) through optimizing the amount of surfactant (Span 80) in the "oil" phase. These highly monodisperse SLNs confirm stable loading of Gd-DOTA and a stable size distribution (∼150 nm) over time in aqueous solution. Relaxivity measurements (1.4T, 37 °C) demonstrate that the r1 of Gd-DOTA does not strongly decrease following encapsulation in SLNs, demonstrating an advantage over liposomes. These Gd-loaded SLNs demonstrate enhanced contrast in vivo at 7T using T1w MRI and in the future can be loaded with other cargo (hydrophilic or hydrophobic) to enable functionality with other imaging modalities such as optical or positron emission tomography.

Crystals and crystallization in oil-in-water emulsions: implications for emulsion-based delivery systems

Many bioactive components intended for oral ingestion (pharmaceuticals and nutraceuticals) are hydrophobic molecules with low water-solubilities and high melting points, which poses considerable challenges to the formulation of oral delivery systems. Oil-in-water emulsions are often suitable vehicles for the encapsulation and delivery of this type of bioactive component. The bioactive component is usually dissolved in a carrier lipid phase by either dilution and/or heating prior to homogenization, and then the carrier lipid and water phases are homogenized to form an emulsion consisting of small oil droplets dispersed in water. The successful development of this kind of emulsion-based delivery system depends on a good understanding of the influence of crystals on the formation, stability, and properties of emulsions. This review article addresses the physicochemical phenomena associated with the encapsulation, retention, crystallization, release, and absorption of hydrophobic bioactive components within emulsions. This knowledge will be useful for the rational formulation of effective emulsion-based delivery systems for oral delivery of crystalline hydrophobic bioactive components in the food, health care, and pharmaceutical industries.

Experimental factorial design applied to mucoadhesive lipid nanoparticles via multiple emulsion process

Solid lipid nanoparticles (SLNs) produced from multiple emulsions technology theoretically enclose an inner aqueous compartment suitable for hydrophilic biomolecules. This paper reports a 3(3) full factorial design study to optimize SLNs formulations for hydrophilic biomolecules. The concentrations of solid lipid, lipophilic and hydrophilic emulsifiers were set as the 3 independent variables. Mean particle size (Z-Ave), polydispersity index (PI) and zeta potential (ZP) were set as the dependent variables. The selected optimized parameters were set as 1.0 wt% of solid lipid, 0.25 wt% of lipophilic emulsifier and 1.5 wt% of hydrophilic emulsifier. The coating of SLNs with sodium alginate was found to improve the ZP of the lipid particles and these results suggest that the ideal concentration was 0.75 wt%. The influence of low pH (i.e., about 2-3) in the inner aqueous phase was stronger than higher pH values, contributing for the production of larger droplet sizes. Nevertheless, these systems can be useful for the incorporation of biomolecules requiring a pH ranging between 4 and 10. SLNs based on multiple emulsions technology were found to be a promising approach for the incorporation of several hydrophilic drugs, such as proteins and peptides.