Simultaneous Electrochemical Determination of Sulphite and Nitrite by a Gold Nanoparticle/Graphene-Chitosan Modified Electrode

A chitosan-based fluorescence probe for the detection of nitrite in food samples

Polysaccharides, as a natural biomolecule, are abundantly available in nature and have good bioactivity. They contain several functional groups such as hydroxyl, carboxyl, and amino groups, which can exhibit different fluorescent property after modification. In this work, the chitosan (CS) was selected as a raw material and grafted with methotrexate (MTX) to prepare a nitrite sensor. The sensing material exhibited obvious aggregation-induced emission (AIE) properties and could react with nitrite under acidic conditions to form diazo compounds that could enhance fluorescence. This "enhanced-luminescent" mode fluorescence probe for nitrite (NO2-) displayed superior sensing performance, such as excellent sensitivity, good selectivity, a low detection limit (0.22 μM) and wide detection range from 0 to 120 μM. Moreover, this sensor was effectively applied to detect nitrite in sausage samples. Finally, CS-MTX also showed excellent biocompatibility, good water solubility and outstanding antibacterial performance against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli). These results demonstrated that it may be a potent multifunctional material for nitrite detection and anti-bacteria in food industry.

Recent advances in electrochemical approaches for detection of nitrite in food samples

Nitrite is a common ingredient in the industry and agriculture; it is everywhere, like water, food, and surroundings. Recently, several approaches have been developed to measure the nitrite levels. So, this review was presented as a summary of many approaches utilized to detect the nitrite. Furthermore, the types of information that may be acquired using these methodologies, including optic and electrical signals, were discussed. In electrical signal methods, electrochemical sensors are usually developed using different materials, including carbon, polymers, oxides, and hydroxides. At the same time, optic signals receiving techniques involve utilizing fluorescence chromatography, absorption, and spectrometry instruments. Furthermore, these methodologies' benefits, drawbacks, and restrictions are examined. Lastly, due to the efficiency and fast means of electrochemical detectors, it was suggested that they can be used for detecting nitrite in food safety. Futuristic advancements in the techniques used for nitrite determination are subsequently outlined.

Electrochemical sensor for sensitive nitrite and sulfite detection in milk based on acid-treated Fe3O4@SiO2 nanoparticles

In this work, a simple electrochemical sensing platform based on acid-treated Fe3O4@SiO2 nanoparticles was successfully prepared for nitrite and sulfite detection. Fe3O4@SiO2 nanoparticles were synthesized through the sol-gel and hydrothermal methods. Fe3O4@SiO2 presented positive charges after acid treatment, which could enhance the electrostatic attraction between Fe3O4@SiO2 and nitrite and sulfite. The Fe3O4@SiO2(acid-treated) modified magnetic glassy carbon electrode (MGCE) was applied to detect nitrite and sulfite using differential pulse voltammetry and cyclic voltammetry. Under optimized conditions, the developed electrochemical sensor presented good analytical properties for nitrite and sulfite detection with detection limits of 3.33 μmol/L and 31.57 μmol/L, respectively. The good recoveries varied from 85.18% to 111.02%, with a relative standard deviation of 0.23-4.80%. Furthermore, the Fe3O4@SiO2(acid-treated) modified MGCE showed better selectivity, reproducibility, and repeatability in nitrite and sulfite detection. Therefore, this proposed electrochemical sensor provides a new method for developing a nitrite and sulfite detection sensor.

Voltammetric determination of doxycycline in feedstock using modified carbon screen-printed electrode

In this work, we describe the development of an electrochemical sensing platform that employs electrochemically reduced graphene oxide (ErGO) and gold (Au) deposited on a screen-printed carbon electrode (SPCE) to synthesize Au/ErGO/SPCE for the determination of the antibiotic drug doxycycline (DC). A modified Hummer's approach was adopted to initially prepare graphene oxide, which was then characterized by using powder XRD, FTIR, and UV spectroscopy before being utilized for modification on SPCE. Cyclic voltammetry was performed to form ErGO on SPCE to give ErGO/SPCE followed by electrodeposition of gold to get a final modified electrode Au/ErGO/SPCE. The effect of experimental conditions, like scan rate and pH on the electrochemical behavior of DC for Au/ErGO/SPCE, was evaluated. Square wave voltammetry (SWV) and cyclic voltammetry (CV) measurements were used to assess the electro-oxidation of DC on Au/ErGO/SPCE, and the electrochemical reaction conditions were also optimized. Furthermore, Au/ErGO/SPCE-based electrochemical sensors showed good recovery and high accuracy for DC determination in the complex food matrix and blood serum. The limit of detection (LOD), the limit of quantification (LOQ), and the linear calibration range of DC on Au/ErGO/SPCE under optimum experimental conditions were 0.124 µm, 0.415 µm, and 1-100 µm respectively, with high sensitivity of 0.194 μA μM-1 cm-2. Finally, the proposed electrochemical sensing platform was effectively used to determine low DC concentrations in real samples such as chicken flesh and blood serum, indicating its wide range of applications in quality control.

Carbon Materials in Electroanalysis of Preservatives: A Review

Electrochemical sensors in electroanalysis are a particularly useful and relatively simple way to identify electroactive substances. Among the materials used to design sensors, there is a growing interest in different types of carbon. This is mainly due to its non-toxic properties, low cost, good electrical conductivity, wide potential range, and the possibility of using it in both aqueous and nonaqueous media. The electrodes made of carbon, and especially of carbon modified with different materials, are currently most often used in the voltammetric analysis of various compounds, including preservatives. The objective of this paper is to present the characteristics and suitability of different carbon materials for the construction of working electrodes used in the voltammetric analysis. Various carbon materials were considered and briefly discussed. Their analytical application was presented on the example of the preservatives commonly used in food, cosmetic, and pharmaceutical preparations. It was shown that for the electroanalysis of preservatives, mainly carbon electrodes modified with various modifiers are used. These modifications ensure appropriate selectivity, high sensitivity, low limits of detection and quantification, as well as a wide linearity range of voltammetric methods of their identification and determination.

Ultrasensitive determination of nitrite based on electrochemical platform of AuNPs deposited on PDDA-modified MXene nanosheets

An ultrasensitive and high-performance electrochemical nitrite sensing platform based on gold nanoparticles deposited on poly (dimethyl diallyl ammonium chloride)-decorated MXene (Ti₃C₂T_x) (AuNPs/Ti₃C₂T_x-PDDA) was constructed. AuNPs/Ti₃C₂T_x-PDDA on the surface of electrode displayed synergetic catalytic effect for oxidizing NO₂^‾ originating from especially catalytic activity of AuNPs, large area and excellent conductivity of Ti₃C₂T_x, as well as electrostatic interaction of PDDA. The amperometry technique was employed for quantitative determination of nitrite, in which the AuNPs/Ti₃C₂T_x-PDDA/GCE sensing platform showed outstanding linear relationship in 0.1-2490 μM and 2490-13490 μM for nitrite, meanwhile the detection limit of 0.059 μM. Besides, the prepared sensor possessed high sensitivity of 250 μA mM^-1 cm^-2 yet excellent selectivity, stability and reproducibility. Furthermore, this platform also exhibited satisfactory feasibility of nitrite sensing in running water and ham sausage sample. This work would broaden a facile approach to construct high sensitivity electrochemical sensing platform via two-dimension materials and its nanocomposites.

Differential Pulse Voltammetric Electrochemical Sensor for the Detection of Etidronic Acid in Pharmaceutical Samples by Using rGO-Ag@SiO2/Au PCB

An rGO-Ag@SiO2 nanocomposite-based electrochemical sensor was developed to detect etidronic acid (EA) using the differential pulse voltammetric (DPV) technique. Rapid self-assembly of the rGO-Ag@SiO2 nanocomposite was accomplished through probe sonication. The developed rGO-Ag@SiO2 nanocomposite was used as an electrochemical sensing platform by drop-casting on a gold (Au) printed circuit board (PCB). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) confirmed the enhanced electrochemical active surface area (ECASA) and low charge transfer resistance (Rct) of the rGO-Ag@SiO2/Au PCB. The accelerated electron transfer and the high number of active sites on the rGO-Ag@SiO2/Au PCB resulted in the electrochemical detection of EA through the DPV technique with a limit of detection (LOD) of 0.68 μM and a linear range of 2.0-200.0 μM. The constructed DPV sensor exhibited high selectivity toward EA, high reproducibility in terms of different Au PCBs, excellent repeatability, and long-term stability in storage at room temperature (25 °C). The real-time application of the rGO-Ag@SiO2/Au PCB for EA detection was investigated using EA-based pharmaceutical samples. Recovery percentages between 96.2% and 102.9% were obtained. The developed DPV sensor based on an rGO-Ag@SiO2/Au PCB could be used to detect other electrochemically active species following optimization under certain conditions.

Phenosafranin-Based Colorimetric-Sensing Platform for Nitrite Detection Enabled by Griess Assay

A facile and effective colorimetric-sensing platform based on the diazotization of phenosafranin for the detection of NO 2 - under acidic conditions using the Griess assay is presented. Diazotization of commercial phenosafranin produces a color change from purplish to blue, which enables colorimetric quantitative detection of NO 2 - . Optimal detection conditions were obtained at a phenosafranin concentration of 0.25 mM, HCl concentration of 0.4 M, and reaction time of 20 min. Under the optimized detection conditions, an excellent linearity range from 0 to 20 μM was obtained with a detection limit of 0.22 μM. Favorable reproducibility and selectivity of the colorimetric sensing platform toward NO 2 - were also verified. In addition, testing spiked ham sausage, bacon, and sprouts samples demonstrated its excellent practicability. The presented colorimetric sensing platform is a promising candidate for the detection of NO 2 - in real applications.

Autonomous and In Situ Ocean Environmental Monitoring on Optofluidic Platform

Determining the distributions and variations of chemical elements in oceans has significant meanings for understanding the biogeochemical cycles, evaluating seawater pollution, and forecasting the occurrence of marine disasters. The primary chemical parameters of ocean monitoring include nutrients, pH, dissolved oxygen (DO), and heavy metals. At present, ocean monitoring mainly relies on laboratory analysis, which is hindered in applications due to its large size, high power consumption, and low representative and time-sensitive detection results. By integrating photonics and microfluidics into one chip, optofluidics brings new opportunities to develop portable microsystems for ocean monitoring. Optofluidic platforms have advantages in respect of size, cost, timeliness, and parallel processing of samples compared with traditional instruments. This review describes the applications of optofluidic platforms on autonomous and in situ ocean environmental monitoring, with an emphasis on their principles, sensing properties, advantages, and disadvantages. Predictably, autonomous and in situ systems based on optofluidic platforms will have important applications in ocean environmental monitoring.

Nanomaterial based electrochemical sensors for the safety and quality control of food and beverages

The issue of foodborne related illnesses due to additives and contaminants poses a significant challenge to food processing industries. The efficient, economical and rapid analysis of food additives and contaminants is therefore necessary in order to minimize the risk of public health issues. Electrochemistry offers facile and robust analytical methods, which are desirable for food safety and quality assessment over conventional analytical techniques. The development of a wide array of nanomaterials has paved the way for their applicability in the design of high-performance electrochemical sensing devices for medical diagnostics and environment and food safety. The design of nanomaterial based electrochemical sensors has garnered enormous attention due to their high sensitivity and selectivity, real-time monitoring and ease of use. This review article focuses predominantly on the synthesis and applications of different nanomaterials for the electrochemical determination of some common additives and contaminants, including hydrazine (N2H4), malachite green (MG), bisphenol A (BPA), ascorbic acid (AA), caffeine, caffeic acid (CA), sulfite (SO32-) and nitrite (NO2-), which are widely found in food and beverages. Important aspects, such as the design, fabrication and characterization of graphene-based materials, gold nanoparticles, mono- and bimetallic nanoparticles and metal nanocomposites, sensitivity and selectivity for electrochemical sensor development are addressed. High-performance nanomaterial based electrochemical sensors have and will continue to have myriad prospects in the research and development of advanced analytical devices for the safety and quality control of food and beverages.

A novel electrochemical epinine sensor using amplified CuO nanoparticles and an-hexyl-3-methylimidazolium hexafluorophosphate electrode

This study suggests a carbon paste electrode modified with CuO nanoparticles andn-hexyl-3-methylimidazolium hexafluorophosphate (CPE/CuO-NPs/HMIPF₆) as a powerful tool for the analysis of epinine for the first time.

Electrochemical Determination of Nitrite by Au Nanoparticle/Graphene-Chitosan Modified Electrode

A highly sensitive nitrite (NO₂⁻) electrochemical sensor is fabricated using glassy carbon electrode modified with Au nanoparticle and grapheme oxide. Briefly, this electrochemical sensor was prepared by drop-coating graphene oxide-chitosan mixed film on the surface of the electrode and then electrodepositing a layer of Au nanoparticle using cyclic voltammetry. The electrochemical behavior of NO₂⁻ on the sensor was investigated by cyclic voltammetry and amperometric i-t curve. The results showed that the sensor exhibited better electrocatalytic activity for NO₂⁻ in 0.1 mol/L phosphate buffer solution (PBS) (pH 5.0). The oxidation peak current was positively correlated with NO₂⁻ concentration in the ranges of 0.9 µM to 18.9 µM. The detection limit was estimated to be 0.3 µM. In addition, the interference of some common ions (e.g., NO₃⁻, CO₃²⁻, SO₄²⁻, Cl⁻, Ca²⁺ and Mg²⁺) and oxidizable compound including sodium sulfite and ascorbic acid in the detection of nitrite was also studied. The results show that this sensor is more sensitive and selective to NO₂⁻. Therefore, this electrochemical sensor provided an effective tool for the detection of NO₂⁻.

Environmentally friendly synthesis of CeO2 nanoparticles for the catalytic oxidation of benzyl alcohol to benzaldehyde and selective detection of nitrite

Cerium oxide nanoparticles (CeO₂ NPs) are favorable in nanotechnology based on some remarkable properties. In this study, the crystalline CeO₂ NPs are successfully prepared by an efficient microwave combustion (MCM) and conventional route sol-gel (CRSGM) methods. The structural morphology of the as-prepared CeO₂ NPs was investigated by various spectroscopic and analytical techniques. Moreover, the XRD pattern confirmed the formation of CeO₂ NPs as a face centered cubic structure. The magnetometer studies indicated the low saturation magnetization (23.96 emu/g) of CeO₂ NPs for weak paramagnetic and high saturation magnetization (32.13 emu/g) of CeO₂ NPs for super paramagnetic. After that, the oxidation effect of benzyl alcohol was investigated which reveals good conversion and selectivity. Besides, the CeO₂ NPs modified glassy carbon electrode (GCE) used for the detection of nitrite with linear concentration range (0.02–1200 μM), low limit of detection (0.21 μM) and higher sensitivity (1.7238 μAμM⁻¹ cm⁻²). However, the CeO₂ NPs modified electrode has the fast response, high sensitivity and good selectivity. In addition, the fabricated electrode is applied for the determination of nitrite in various water samples. Eventually, the CeO₂ NPs can be regarded as an effective way to enhance the catalytic activity towards the benzyl alcohol and nitrite.

Methods for the detection and determination of nitrite and nitrate: A review

Various techniques for the determination of nitrite and/or nitrate developed during the past 15 years were reviewed in this article. 169 references were covered. The detection principles and analytical parameters such as matrix, detection limits and detection range of each method were tabulated. The advantages and disadvantages of various methods were evaluated. In comparison to other methods, spectrofluorimetric methods have become more attractive due to its facility availability, high sensitivity and selectivity, low limits of detection and low-cost.

Electrochemical Grafting of Graphene Nano Platelets with Aryl Diazonium Salts

To vary interfacial properties, electrochemical grafting of graphene nano platelets (GNP) with 3,5-dichlorophenyl diazonium tetrafluoroborate (aryl-Cl) and 4-nitrobenzene diazonium tetrafluoroborate (aryl-NO₂) was realized in a potentiodynamic mode. The covalently bonded aryl layers on GNP were characterized using atomic force microscopy and X-ray photoelectron spectroscopy. Electrochemical conversion of aryl-NO₂ into aryl-NH₂ was conducted. The voltammetric and impedance behavior of negatively and positively charged redox probes (Fe(CN)₆^3-/4- and Ru(NH₃)₆^2+/3+) on three kinds of aryl layers grafted on GNP reveal that their interfacial properties are determined by the charge states of redox probes and reactive terminal groups (-Cl, -NO₂, -NH₂) in aryl layers. On aryl-Cl and aryl-NH₂ garted GNP, selective and sensitive monitoring of positively charged lead ions as well as negatively charged nitrite and sulfite ions was achieved, respectively. Such a grafting procedure is thus a perfect way to design and control interfacial properties of graphene.

A non-covalent interaction of Schiff base copper alanine complex with green synthesized reduced graphene oxide for highly selective electrochemical detection of nitrite

A novel and selective nitrite sensor based on non-covalent interaction of Schiff base copper complex [Cu(sal-ala)(phen)] with reduced graphene oxide (RGO) was developed by simple eco-friendly approach.

A facile fabrication of copper particle-decorated novel graphene flower composites for enhanced detecting of nitrite

A novel 3D porous flower-like reduced graphene oxide (f-RGO) was explored as the support material for the Cu particles on glassy carbon electrode (Cu/f-RGO/GCE) for detecting nitrite.

An RNA aptamer-based electrochemical biosensor for sensitive detection of malachite green

A RNA aptamer-based electrochemical biosensing strategy has been developed for sensitive and selective detection of malachite green.