Ni-based photocatalytic H2-production cocatalysts2

Oxygen vacancies synergistic cobalt phosphide electron bridge modulated bismuth oxychloride/carbon nitride Z-scheme junction for efficient carbon dioxide reduction coupled with tetracycline oxidation

Although great progress has been made with respect to electron bridges, the electron mobility of the state-of-the-art electron bridges is far from satisfactory because of weak electrical conductivity. To overcome the above issue, cobalt phosphide (CoP), as a model electron bridge, was modified by superficial oxygen vacancies (OVs) and embedded into a defective bismuth oxychloride/carbon nitride (BiO1-xCl/g-C3N4) Z-scheme heterojunction to obtain atomic-level insights into the effect of surface OVs on CoP electron bridges. Compared to BiO1-xCl/g-C3N4 and bismuth oxychloride/cobalt phosphide/carbon nitride (BiOCl/CoP/g-C3N4) composites, the defective bismuth oxychloride/cobalt phosphide/carbon nitride (BiO1-xCl/CoP/g-C3N4) heterojunction exhibited remarkable photocatalytic redox performance, indicating that the surface OVs-assisted CoP electron bridge effectively boosted electrical conductivity and yielded ultrafast electron transfer rates. The theoretical and experimental results demonstrate that the surface OVs play a critical role in improving the electrical conductivity of the CoP electron bridge, thereby accelerating electron mobility. This research provides insights into interfacial OVs-modified transition metal phosphide (TMP) electron bridges and their potential application in heterojunctions for energy crisis mitigation and environmental remediation.

Solar-activated and hydrothermally synthesized effective rGO/Ag2S composites for the destruction of naphthol green B dye and antibacterial applications

Graphene-based nanocomposites are developing as a new class of materials with several uses. The varied weight percentages of rGO on Ag2S catalysts were synthesized using a simple hydrothermal process and employed for the decomposition of anionic dye naphthol green B (NGB) under solar light. The reduced graphene oxide-based silver sulfide (rGO/Ag2S) nanoparticles were then examined using XRD, SEM, EDS, HR-TEM, XPS, UV-DRS, and PL analysis. Using solar light, the photocatalytic activity of the produced catalyst was examined for the degradation of naphthol green B (NGB) in an aqueous solution. At pH 9, rGO/Ag2S is discovered to be more effective than the other catalysts for the NGB dye mineralization. Analyses have been conducted on the influence of operational parameters on the photo-mineralization of NGB, including the initial pH, initial dye concentration, and catalyst dosage. The dye concentration increased; the efficiency of photocatalytic degradation tended to decrease. Chemical oxygen demand (COD) studies have verified the NGB dye mineralization. Active species trapping revealed that holes, hydroxyl radicals, and superoxide radicals all played major roles in the photocatalytic deterioration of NGB processes. Additionally, a potential mechanism of NGB dye degradation by rGO/Ag2S catalyst is presented. The synthesized compound was further evaluated for antibacterial activity, and the results indicated that rGO/Ag2S were potentially effective antibacterial agents.

Flexible nanosheets for plasmonic photocatalysis: microwave-assisted organic synthesis of Ni-NiO@Ni2CO3(OH)2 core-shell@sheet hybrid nanostructures

Visible light-active nickel-based plasmonic photocatalysts provide a cost-effective alternative to noble metals. However, their rarity, fragility, and limited understanding pose challenges. This work presents a microwave-assisted organic synthesis of a Ni-NiO@Ni2CO3(OH)2 core-shell@sheet plasmonic photocatalyst. By employing time and power dependent synthesis, this catalyst exhibits flexible Ni2CO3(OH)2 nanosheets enveloping the Ni-NiO structure, surpassing the pristine Ni@NiO/NiCO3 core-shell counterpart. Chemical reaction mechanisms suggest that irradiation of pristine Ni-NiO/NiCO3 nano structures leads to breakage of amorphous NiCO3 to Ni2+ and CO32-, which further, in the presence of water solvent, interacts with OH- ions leading to the formation of Ni(CO3)·Ni(OH)2. With enhanced light absorption and photocatalytic properties, the resulting core-shell@sheet photocatalyst demonstrates double the hydrogen evolution reaction yield (40 μmol g-1 h-1) compared to the pristine catalyst (20 μmol g-1 h-1). The enhanced H2 yield is attributed to the flexible sheets, cross-dimensional photocatalyst structure, increased surface area for surface reactions, and higher H2 activity of Ni2CO3(OH)2. This research showcases the potential of microwave-assisted synthesis in developing flexible nanosheets with superior solar water splitting performance.

Ni(OH)2 surface-modified hierarchical ZnIn2S4 nanosheets: dual photocatalytic application and mechanistic insights

The simultaneous utilization of electrons and holes to couple photocatalytic H2 production with selective biomass transformation has attracted immense interest toward achieving sustainability in the fields of energy and chemical industry. In this study, by assembling highly dispersed Ni(OH)2 onto ZnIn2S4 (ZIS), efficient H2 evolution along with highly selective photocatalytic oxidation of furfuryl alcohol (FA) to furfural (FF) in pure water was achieved under anaerobic conditions. The H2 production and FA conversion rates over the optimal Ni-ZIS sample reached about 686 and 583 μmol g-1 h-1, respectively, about 4.9 and 1.7 folds as those of pure ZIS. Moreover, the formation of by-products with C-C coupling was dramatically suppressed over Ni-ZIS, resulting in higher selectivity for FF (97%), which is about 2.7-fold that of pure ZIS (36%). Deep mechanistic studies were conducted to reveal the structural evolution and cocatalyst effects of Ni(OH)2. This study not only offers a feasible paradigm for modifying the surface of catalysts to tune the photoactivity and selectivity for product-oriented alcohol oxidation coupled with efficient H2 production in water but also reveals the working mechanism of the deposited Ni(OH)2 over ZIS toward coupling reactions.

Carbonized polymer dots modified ZnIn2S4 microspheres for visible-light-driven hydrogen evolution promotion performance

To effectively separate electron-hole pairs produced by light, a heterojunction arrangement can be employed, thereby improving photocatalytic efficiency. In this study, a simple hydrothermal process is used to manufacture carbonized polymer dots/ZnIn2S4 (CPDs/ZIS) heterostructure, which enhances the light absorption and charge carrier lifetime in comparison to bare ZnIn2S4 (ZIS). Upon irradiation with visible light, the 3-CPDs/ZIS composite generates hydrogen at a rate of 133 μmol g-1 h-1, which is 8.9 times faster than that of pure ZIS. The addition of CPDs can increase the range of light that can be absorbed, extend the service life of the optical charge, increase the specific surface area, and promote charge separation and transmission, which could effectively accelerate the photocatalytic reduction reaction. The presence of CPDs results in the introduction of multiple transition energy states and a decrease in the H* adsorption free energy, which enhances the hydrogen evolution activity according to the theoretical calculation findings of density functional theory (DFT) and Gibbs free energy of the hydrogen evolution process. Combining theoretical calculations and experimental results, a direct Z-type heterojunction mechanism is proposed for the hydrogen evolution promotion effectiveness of CPDs/ZIS under visible light.

Maneuvering the Directional Charge Flow for Photoredox Organic Conversion

Transition-metal chalcogenide quantum dots (TMC QDs) show great promise in artificial photosynthesis for excellent light-harvesting capability. Nonetheless, TMC QDs have limitations of ultrafast charge recombination rate, sluggish carrier migration kinetics, and generic photocorrosion, retarding their widespread applications. To solve these obstacles, herein, we demonstrate the stimulation of charge migration over TMC QDs with the aid of nonconjugated insulating polymer and graphene (GR) for a versatile photoredox selective organic transformation. To this end, an ultrathin insulating polymer layer, i.e., poly(allylamine hydrochloride) (PAH), grafted on the GR framework, is electrostatically intercalated at the interface of TMCs QDs and the GR framework via a self-assembly for constructing TMC QDs/PAH/GR three-dimensional spatially multilayered heterostructures. In this well-defined nanoarchitecture, TMC QDs function as a light-harvesting antenna, GR as a terminal electron reservoir, and PAH as an intermediate interfacial charge relay mediator. We ascertain that the ultrathin PAH interim layer unexpectedly fosters the photoelectron migration from TMCs QDs to the GR framework in a tunable fashion, boosting the charge separation of TMCs QDs and resulting in significantly improved photoactivities toward anaerobic reduction of aromatic nitro compounds to amino derivatives and oxidation of alcohols to aldehydes under visible light. Photoredox catalysis mechanisms of such TMC QDs/PAH/GR photosystems are elucidated, and the active species in these photoredox organic conversion reactions are comprehensively determined. Our work would open new frontiers to finely modulate the charge transport of TMCs QDs via nonconjugated insulating polymers for solar energy conversion.

Interfacial electron modulation of 2D nanopetal ZnIn2S4 with edge-decorated Ni clusters for accelerated photocatalytic H2 evolution

Heterostructure interfacial engineering between photocatalyst and co-catalyst to obtain an optimized electronic structure is a promising approach to improving their performance in the photocatalytic hydrogen evolution reaction (HER). In this work, two-dimensional nanopetal-like ZnIn2S4 (ZIS) with an adequately exposed active (110) edge facet-decorated Ni cluster heterostructure was prepared via chemical bath deposition, followed by photodeposition. In the catalyst preparation, the ZIS microstructure was modulated to sufficiently expose the active sites of the (110) edge for the HER, on which spontaneous interfacial engineering with an additional Ni cluster co-catalyst would be triggered via photodeposition in situ. The hydrogen production rate of the composite photocatalyst was excellent, at up to 26.80 mmol g-1 h-1 under simulated sunlight, which was 15.4 times greater than that of pristine ZIS. The optimized photocatalyst achieved a state-of-the-art apparent quantum yield of 61.68% at a single wavelength of 420 nm. Combined with systematic experimental characterization and density functional theory calculation, it was demonstrated that the separation and migration of charge carriers were significantly enhanced via the Ni cluster-induced interfacial electron redistribution, which contributed to the near-zero Gibbs free energy barrier and favored intermediate (*H) adsorption and desorption behavior, resulting in the superior photocatalytic performance. In summary, this work enables tuning of the interfacial electronic properties via spontaneous photodeposition of metallic cluster co-catalyst on the edge active sites, through which the separation of photogenerated charge carriers and surface redox reactions can be synergistically facilitated.

Ultrathin Carbon Nitride Nanosheets Exfoliated and In Situ Modified with a Nickel Bis(Chelate) Complex for Boosting Photocatalytic Performances

Exfoliation and interfacial modification of two-dimensional (2D) polymeric carbon nitride (CN) are considerably vital for applications in photo/electrocatalysis fields. Here, a grinding-ultrasonic route was designed to construct nickel bis(chelate) complex (Ni(abt)₂, abt = 2-aminobenzenethiolate)-modified CN ultrathin nanosheets. Under the assistance of the shear force derived from the grinding process, Ni(abt)₂ was implanted into the interlamination of bulk CN, resulting in the formation of ultrathin CN (UCN) nanosheets. Simultaneously, Ni(abt)₂ molecules were anchored on the surfaces of as-formed UCN nanosheets due to the π-π stacking interaction. Interestingly, compared with single Ni(abt)₂ and UCN, the as-obtained Ni(abt)₂/UCN nanosheets exhibited excellent photocatalytic hydrogen evolution capability. A molecule-semiconductor internal electron transmission mechanism was suggested for explaining the separation and transfer of electron-hole pairs. Density functional theory (DFT) calculations demonstrated that the interface-induced electron redistribution tuned the electron density and hydrogen adsorption of the active centers, thus enhancing the photocatalytic performance of the hybrid catalyst. In addition, the as-obtained Ni(abt)₂/UCN nanosheets could also catalyze the reduction of nitroaromatics in the presence of NaBH₄. It was found that under the simulated sunlight irradiation, the conversion efficiency of nitroaromatic compounds to amino aromatic ones was up to 97.3%, far higher than that under the condition without light irradiation (51.7%), suggesting that the photocatalytic-produced hydrogen took part in the reduction of nitroaromatic compounds.

Ferric-ellagate complex: A promising multifunctional photocatalyst

The semiconductors have exhibited great potential in the field of photocatalytic energy production, environmental remediation and bactericidal. Nevertheless, those inorganic semiconductors are still restricted in commercial application due to the drawbacks of easy agglomeration and low solar energy conversion efficiency. Herein, ellagic acid (EA) based metal-organic complexes (MOCs) were synthesized through a facile stirring process at room temperature with Fe³⁺, Bi³⁺ and Ce³⁺ as the metal center. The EA-Fe photocatalyst exhibited superior photocatalytic activity toward Cr(VI) reduction, where Cr(VI) were completely removed within 20 min. Meanwhile, EA-Fe also displayed good photocatalytic degradation of organic contaminants and photocatalytic bactericidal performance. The photodegradation rates of TC and RhB by EA-Fe were 15 and 5 times that by bare EA, respectively. Moreover, EA-Fe was capable of effectively eliminating both E. coli and S. aureus bacteria. It was found that EA-Fe was capable of generating superoxide radicals, which could participate in the reduction of heavy metals, degradation of organic contaminants and inactivation of bacteria. A photocatalysis-self-Fenton system could be established by EA-Fe solely. This work would provide a new insight for designing multifunctional MOCs with high photocatalytic efficiency.

The Collision between g-C3 N4 and QDs in the Fields of Energy and Environment: Synergistic Effects for Efficient Photocatalysis

Recently, graphitic carbon nitride (g-C₃ N₄ ) has attracted increasing interest due to its visible light absorption, suitable energy band structure, and excellent stability. However, low specific surface area, finite visible light response range (<460 nm), and rapid photogenerated electron-hole (e^- -h⁺ ) pairs recombination of the pristine g-C₃ N₄ limit its practical applications. The small size of quantum dots (QDs) endows the properties of abundant active sites, wide absorption spectrum, and adjustable bandgap, but inevitable aggregation. Studies have confirmed that the integration of g-C₃ N₄ and QDs not only overcomes these limitations of individual component, but also successfully inherits each advantage. Encouraged by these advantages, the synthetic strategies and the fundamental of QDs/g-C₃ N₄ composites are briefly elaborated in this review. Particularly, the synergistic effects of QDs/g-C₃ N₄ composites are analyzed comprehensively, including the enhancement of the photocatalytic performance and the avoidance of aggregation. Then, the photocatalytic applications of QDs/g-C₃ N₄ composites in the fields of environment and energy are described and further combined with DFT calculation to further reveal the reaction mechanisms. Moreover, the stability and reusability of QDs/g-C₃ N₄ composites are analyzed. Finally, the future development of these composites and the solution of existing problems are prospected.

Recent Advances and Future Perspectives of Metal-Based Electrocatalysts for Overall Electrochemical Water Splitting

Recently, the growing demand for a renewable and sustainable fuel alternative is contingent on fuel cell technologies. Even though it is regarded as an environmentally sustainable method of generating fuel for immediate concerns, it must be enhanced to make it extraordinarily affordable, and environmentally sustainable. Hydrogen (H₂ ) synthesis by electrochemical water splitting (ECWS) is considered one of the foremost potential prospective methods for renewable energy output and H₂ society implementation. Existing massive H₂ output is mostly reliant on the steaming reformation of carbon fuels that yield CO₂ together with H₂ and is a finite resource. ECWS is a viable, efficient, and contamination-free method for H₂ evolution. Consequently, developing reliable and cost-effective technology for ECWS was a top priority for scientists around the globe. Utilizing renewable technologies to decrease total fuel utilization is crucial for H₂ evolution. Capturing and transforming the fuel from the ambient through various renewable solutions for water splitting (WS) could effectively reduce the need for additional electricity. ECWS is among the foremost potential prospective methods for renewable energy output and the achievement of a H₂ -based economy. For the overall water splitting (OWS), several transition-metal-based polyfunctional metal catalysts for both cathode and anode have been synthesized. Furthermore, the essential to the widespread adoption of such technology is the development of reduced-price, super functional electrocatalysts to substitute those, depending on metals. Many metal-premised electrocatalysts for both the anode and cathode have been designed for the WS process. The attributes of H₂ and oxygen (O₂ ) dynamics interactions on the electrodes of water electrolysis cells and the fundamental techniques for evaluating the achievement of electrocatalysts are outlined in this paper. Special emphasis is paid to their fabrication, electrocatalytic performance, durability, and measures for enhancing their efficiency. In addition, prospective ideas on metal-based WS electrocatalysts based on existing problems are presented. It is anticipated that this review will offer a straight direction toward the engineering and construction of novel polyfunctional electrocatalysts encompassing superior efficiency in a suitable WS technique.

Integrated p-n/Schottky junctions for efficient photocatalytic hydrogen evolution upon Cu@TiO2-Cu2O ternary hybrids with steering charge transfer

Solar-driven photocatalytic H₂ evolution could tackle the issue of fossil fuels-triggered greenhouse gas emission with sustainable clean energy. However, splitting water into hydrogen with high performance by a single semiconductor is challenging because of the poor charge separation efficiency. Herein, a novel ternary Cu@TiO₂-Cu₂O hybrid photocatalyst with multiple charge transfer channels has been designed for efficient solar-to-hydrogen evolution. Indeed, the ternary Cu@TiO₂-Cu₂O hybrid by coupling Cu@TiO₂ with Cu₂O nanoparticles shows highly-efficient photocatalytic hydrogen generation with rate of 12000.6 μmol·g^-1·h^-1, which is 4.4, 2.1, and 1.9 times higher than the pure TiO₂ (2728.8 μmol·g^-1·h^-1), binary Cu@TiO₂ (5595.5 μmol·g^-1·h^-1), and TiO₂-Cu₂O (6076.8 μmol·g^-1·h^-1) composite, respectively. In such a Cu@TiO₂-Cu₂O hybrid, the formed internal electric field in the TiO₂-Cu₂O p-n junction allows the electrons in Cu₂O to migrate to TiO₂, while the electrons in the CB of TiO₂ could flow into Cu via the Schottky junction at the Cu@TiO₂ interface. In this regard, a multiple charge transfer is achieved between the Cu@TiO₂ and Cu₂O, which facilitates promoted charge separation and results in the construction of electron-accumulated center (Cu) and hole-enriched surface (Cu₂O). This p-n/Schottky junctions with steered charge transfer assists the hydrogen production upon the Cu@TiO₂-Cu₂O ternary photocatalyst.

Integration of microbial electrochemical systems and photocatalysis for sustainable treatment of organic recalcitrant wastewaters: Main mechanisms, recent advances, and present prospects

In recent years, microbial electrochemical systems (MESs) have demonstrated to be an environmentally friendly technology for wastewater treatment and simultaneous production of value-added products or energy. However, practical applications of MESs for the treatment of recalcitrant wastewater are limited by their low power output and slow rates of pollutant biodegradation. As a novel technology, hybrid MESs integrating biodegradation and photocatalysis have shown great potential to accelerate the degradation of bio-recalcitrant pollutants and increase the system output. In this review, we summarize recent advances of photo-assisted MESs for enhanced removal of recalcitrant pollutants, and present further discussion about the synergistic effect of biodegradation and photocatalysis. In addition, we analyse in detail different set-up configurations, discuss mechanisms of photo-enhanced extracellular electron transfer, and briefly present ongoing research cases. Finally, we highlight the current limitations and corresponding research gaps, and propose insights for future research.

Nanoengineering of Catalysts for Enhanced Hydrogen Production

Hydrogen (H2) has emerged as a sustainable energy carrier capable of replacing/complementing the global carbon-based energy matrix. Although studies in this area have often focused on the fundamental understanding of catalytic processes and the demonstration of their activities towards different strategies, much effort is still needed to develop high-performance technologies and advanced materials to accomplish widespread utilization. The main goal of this review is to discuss the recent contributions in the H2 production field by employing nanomaterials with well-defined and controllable physicochemical features. Nanoengineering approaches at the sub-nano or atomic scale are especially interesting, as they allow us to unravel how activity varies as a function of these parameters (shape, size, composition, structure, electronic, and support interaction) and obtain insights into structure–performance relationships in the field of H2 production, allowing not only the optimization of performances but also enabling the rational design of nanocatalysts with desired activities and selectivity for H2 production. Herein, we start with a brief description of preparing such materials, emphasizing the importance of accomplishing the physicochemical control of nanostructures. The review finally culminates in the leading technologies for H2 production, identifying the promising applications of controlled nanomaterials.

Silver nanoparticles embedded 2D g-C3N4nanosheets toward excellent photocatalytic hydrogen evolution under visible light

Photocatalytic water splitting is considered to be a feasible method to replace traditional energy. However, most of the catalysts have unsatisfactory performance. In this work, we used a hydrothermal process to grow Ag nanoparticlesin situon g-C₃N₄nanosheets, and then a high performance catalyst (Ag-g-C₃N₄) under visible light was obtained. The Ag nanoparticles obtained by this process are amorphous and exhibit excellent catalytic activity. At the same time, the local plasmon resonance effect of Ag can effectively enhance the absorption intensity of visible light by the catalyst. The hydrogen production rate promote to 1035μmol g^-1h^-1after loaded 0.6 wt% of Ag under the visible light, which was 313 times higher than that of pure g-C₃N₄(3.3μmol g^-1h^-1). This hydrogen production rate is higher than most previously reported catalysts which loaded with Ag or Pt. The excellent activity of Ag-g-C₃N₄is benefited from the Ag nanoparticles and special interaction in each other. Through various analysis and characterization methods, it is shown that the synergy between Ag and g-C₃N₄can effectively promote the separation of carriers and the transfer of electrons. Our work proves that Ag-g-C₃N₄is a promising catalyst to make full use of solar energy.

Highly dispersed NiS2 quantum dots as a promising cocatalyst bridged by acetylene black significantly improved the photocatalytic H2 evolution performance of g-C3N4 nanosheets

In this work, ternary nanocomposite (CNs-AB/NiS2) as a novel efficient H2 evolution photocatalyst without the use of noble metals was successfully synthesized by depositing acetylene black (AB) and ultra-fine NiS2 nanoparticles on the surface of CNs (g-C3N4) through ultrasonic dispersion and chemical vapor deposition methods, respectively. It was revealed that the loaded AB and NiS2 nanoparticles have significantly improved the photocatalytic H2 evolution efficiency of the CNs by improving the photogenerated electron-hole pair separation, visible light absorption and hydrogen evolution kinetics. Besides acting as a cocatalyst, AB served as a conductive electron bridge between CNs and NiS2, which accelerated the effective transfer of electrons from CNs to NiS2 and improved the H2 evolution kinetics of the NiS2 cocatalyst. The H2 evolution experiments revealed that the ternary photocatalyst CNs-AB/NiS210 displayed a H2 evolution rate of up to 2434.85 μmoL g-1 h-1, which was a 1.41 times enhancement compared to that of the binary composite CNs-NiS210 and was 12.43 times higher than that of the pure CNs. Moreover, the ternary photocatalyst CNs-AB/NiS210 not only exhibited excellent photocatalytic activity and stability in the tests, but provided a novel idea for the development of high-efficiency catalysts free of noble metals as well.

Ti3C2Tx MXene nanosheets hybridized with bacteriochlorin–carotenoid conjugates for photocatalytic hydrogen evolution

Development of efficient photocatalysts with a wide spectral range for the photocatalytic hydrogen evolution reaction (HER) is a promising way to address the current energy and environmental crises.

Nickel phosphonate-derived Ni2P@N-doped carbon co-catalyst with built-in electron-bridge for boosting the photocatalytic hydrogen evolution

To construct photocatalytic systems that can efficiently convert solar energy to hydrogen energy, numerous studies have been focused on transition metal phosphides (TMPs) co-catalysts, which display low overpotential and cost...

Red Phosphorus: An Up-and-Coming Photocatalyst on the Horizon for Sustainable Energy Development and Environmental Remediation

Photocatalysis is a perennial solution that promises to resolve deep-rooted challenges related to environmental pollution and energy deficit through harvesting the inexhaustible and renewable solar energy. To date, a cornucopia of photocatalytic materials has been investigated with the research wave presently steered by the development of novel, affordable, and effective metal-free semiconductors with fascinating physicochemical and semiconducting characteristics. Coincidentally, the recently emerged red phosphorus (RP) semiconductor finds itself fitting perfectly into this category ascribed to its earth abundant, low-cost, and metal-free nature. More notably, the renowned red allotrope of the phosphorus family is spectacularly bestowed with strengthened optical absorption features, propitious electronic band configuration, and ease of functionalization and modification as well as high stability. Comprehensively detailing RP's roles and implications in photocatalysis, this review article will first include information on different RP allotropes and their chemical structures, followed by the meticulous scrutiny of their physicochemical and semiconducting properties such as electronic band structure, optical absorption features, and charge carrier dynamics. Besides that, state-of-the-art synthesis strategies for developing various RP allotropes and RP-based photocatalytic systems will also be outlined. In addition, modification or functionalization of RP with other semiconductors for promoting effective photocatalytic applications will be discussed to assess its versatility and feasibility as a high-performing photocatalytic system. Lastly, the challenges facing RP photocatalysts and future research directions will be included to propel the feasible development of RP-based systems with considerably augmented photocatalytic efficiency. This review article aspires to facilitate the rational development of multifunctional RP-based photocatalytic systems by widening the cognizance of rational engineering as well as to fine-tune the electronic, optical, and charge carrier properties of RP.

Two-dimensional graphitic carbon nitride/N-doped carbon with a direct Z-scheme heterojunction for photocatalytic generation of hydrogen

Photocatalysts with a direct Z-scheme heterojunction are promising by virtue of the effectively enhanced separation of charge carriers, high retention of redox ability and the absence of backward photocatalytic reactions. Their activity depends on band alignment and interfacial configurations between two semiconductors for charge carrier kinetics and the effective active sites for photochemical reactions. Herein, a two-dimensional (2D) graphitic carbon nitride/N-doped carbon (C₃N₄/NC) photocatalyst is synthesized by a gas template (NH₄Cl)-assisted thermal condensation method. C₃N₄/NC has the synthetic merits of a direct Z-scheme heterojunction, 2D-2D interfacial contact, and enhanced specific surface area to improve charge separation kinetics and provide abundant active sites for photochemical reaction. It exhibits an over 46-fold increase of the photocatalytic hydrogen production rate compared to bulk C₃N₄ under visible light illumination. This work demonstrates the great potential of 2D Z-scheme heterojunctions for photocatalysis and will inspire more related work in the future.

Biodegradable polyhydroxyalkanoates production from wheat straw by recombinant Halomonas elongata A1

Waste straw bio-transformation of high value-added macromolecule polyhydroxyalkanoates (PHAs) was significance to environmental sustainable development. As a member of the PHA family, poly-β-hydroxybutyrate (PHB) could be synthesized by Halomonas elongata A1 with maximal yields of 22.8% and 11.8% of bacterial weights using glucose and carboxymethyl cellulose as carbon sources, respectively. To improve PHB production, we generated three recombinant strains, the H. elongata P2 with highest PHB biosynthesis ability. When wheat straw, mixed substrate and oleic acid were individually used as single carbon source, the maximal PHA polymer accumulation in the H. elongata P2 reached 5.2%, 16.5% and 27.5%, respectively, after 84 h of cultivation. This hardness, toughness and crystallization properties of the PHA macromolecule altered dependent on starting substrates, when analyzed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). In terms of the hardness and roughness, the PHA produced from mixed substrates was much softer than that from wheat straw but harder than that from oleic acid. The long-chain carbon improved the softness and strength of the produced PHA. Our data indicate that economical substrates, such as straw and waste oil, can be used in the synthesis of multi-functional plastic products with biodegradable properties.

Recent advances in graphite carbon nitride-based nanocomposites: structure, antibacterial properties and synergies

Bacterial infections and transmission threaten human health and well-being. Graphite carbon nitride (g-C₃N₄), a promising photocatalytic antibacterial nanomaterial, has attracted increasing attention to combat bacterial transmission, due to the outstanding stability, high efficiency and environmental sustainability of this material. However, the antibacterial efficiency of g-C₃N₄ is affected by several factors, including its specific surface area, rapid electron/hole recombination processes and optical absorption properties. To improve the efficiency of the antibacterial properties of g-C₃N₄ and extend its range of applications, various nanocomposites have been prepared and evaluated. In this review, the advances in amplifying the photocatalytic antibacterial efficiency of g-C₃N₄-based nanocomposites is discussed, including different topologies, noble metal decoration, non-noble metal doping and heterojunction construction. The enhancement mechanisms and synergistic effects in g-C₃N₄-based nanocomposites are highlighted. The remaining challenges and future perspectives of antibacterial g-C₃N₄-based nanocomposites are also discussed.

Superior sponge-like carbon self-doping graphitic carbon nitride nanosheets derived from supramolecular pre-assembly of a melamine-cyanuric acid complex for photocatalytic H2 evolution

The photocatalytic evolution of hydrogen (H₂) from water splitting is considered a promising route to overcome the energy crisis, and the key lies in the preparation of efficient photocatalysts. Herein, superior ordered sponge-like carbon self-doped graphitic carbon nitride (g-C₃N₄) nanosheets (SCCNS) were prepared via a combined strategy of melamine-cyanuric acid complex supramolecular pre-assembly and solvothermal pre-treatment using ethylene glycol (EG) aqueous solutions (EG:water = 50:50 vol.%) as a solvent and carbon doping source. The following pyrolysis converts the naturally arranged melamine-EG-cyanuric acid supramolecular intermediates to highly crystalline SCCNS with large specific surface areas. The optimal SCCNS-180 exhibits superior photocatalytic H₂ evolution activities (∼4393 and 11 320 μmol h^-1 g^-1) when irradiated with visible light and simulated sunlight; these values are up to ∼17- and ∼18-fold higher than that of bulk g-C₃N₄. The quantum efficiency of SCCNS-180 at λ = 420 nm can reach 6.0%. The excellent photocatalytic performance of SCCNS-180 derives from its distinct ordered sponge-like nanosheet structure with highly crystallinity and the carbon doping, leading to its improved optical absorption, accelerated photoinduced electron-hole pair transfer and separation rate and enlarged specific surface area (134.4 m² g^-1).

Ultra-small molybdenum sulfide nanodot-coupled graphitic carbon nitride nanosheets: Trifunctional ammonium tetrathiomolybdate-assisted synthesis and high photocatalytic hydrogen evolution

The preparation of nanoscale molybdenum sulfide (MoS₂)-modified graphitic carbon nitride (g-C₃N₄) nanosheets usually contains complex and multiple-step operations, including the separate synthesis of nanoscale MoS₂ and g-C₃N₄ nanosheet, and their subsequent composite process. To effectively overcome the above drawbacks, herein, a facile one-step trifunctional ammonium tetrathiomolybdate ((NH₄)₂MoS₄)-assisted approach has been designed to produce ultra-small MoS_x nanodot-coupled g-C₃N₄ nanosheet photocatalyst, including the first addition of ammonium chloride (NH₄Cl) and (NH₄)₂MoS₄ into melamine precursors and their following one-step calcination. During high-temperature calcination, except for the promoting generation of the g-C₃N₄ nanosheets by produced ammonia (NH₃) and hydrogen sulfide (H₂S) gases, the above (NH₄)₂MoS₄ decomposition not only can efficiently clip the s-heptazine framework to produce more terminal amino groups and cyano groups, but also can produce ultra-small MoS_x nanodots on the resultant g-C₃N₄ nanosheet surface, resulting in the final production of ultra-small MoS_x nanodot-coupled g-C₃N₄ nanosheets. The resultant MoS_x nanodot-coupled g-C₃N₄ nanosheets evidently exhibit increased photocatalytic hydrogen (H₂)-generation rate, about 8-fold increase to the traditional MoS₂-modified g-C₃N₄ photocatalyst. The increased H₂-generation rate can be mainly attributed to the synergism of MoS_x nanodots and cyano group on the g-C₃N₄ nanosheet surface. The current facile technology could open the sights for the preparation of other high-efficiency photocatalysts.

Design, Fabrication, and Mechanism of Nitrogen-Doped Graphene-Based Photocatalyst

Solving energy and environmental problems through solar-driven photocatalysis is an attractive and challenging topic. Hence, various types of photocatalysts have been developed successively to address the demands of photocatalysis. Graphene-based materials have elicited considerable attention since the discovery of graphene. As a derivative of graphene, nitrogen-doped graphene (NG) particularly stands out. Nitrogen atoms can break the undifferentiated structure of graphene and open the bandgap while endowing graphene with an uneven electron density distribution. Therefore, NG retains nearly all the advantages of original graphene and is equipped with several novel properties, ensuring infinite possibilities for NG-based photocatalysis. This review introduces the atomic and band structures of NG, summarizes in situ and ex situ synthesis methods, highlights the mechanism and advantages of NG in photocatalysis, and outlines its applications in different photocatalysis directions (primarily hydrogen production, CO₂ reduction, pollutant degradation, and as photoactive ingredient). Lastly, the central challenges and possible improvements of NG-based photocatalysis in the future are presented. This study is expected to learn from the past and achieve progress toward the future for NG-based photocatalysis.