Phosphorus/sulfur co-doped heterogeneous NiCoPxSy nanoarrays boosting overall water splitting

In the large-scale implementation of renewable energy devices, the availability of stable and highly catalytic non-precious metal catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial. Meanwhile, integrating bifunctional electrocatalysts simultaneously on both the anode and cathode still faces challenges. To address this, a stepped preparation strategy was adopted on a nickel foam (NF) substrate to synthesize P, S co-doped NiCoPxSy nanowire array catalysts. The prepared NiCoPxSy catalysts demonstrated a small Tafel slope of 72.5 mV dec-1 for HER and 72.3 mV dec-1 for OER by requiring only 37 mV (326 mV) overpotential to achieve a current density of 10 mA cm-2 (50 mA cm-2). Moreover, when assembled into an electrolytic cell in 1 M KOH, the NiCoPxSy catalysts achieved a low voltage of 1.55 V at 10 mA cm-2 current density and exhibited long-term stability. The outstanding electrocatalytic performance can be attributed to the influence of doped anions on the electronic states and distribution among different atoms, which thereby positively affected the electrocatalytic activity. This research provides an effective method for designing innovative catalysts and paving the way to produce clean energy.

Full-Spectrum Responsive Naphthalimide/Perylene Diimide with a Giant Internal Electric Field for Photocatalytic Overall Water Splitting

The co-assembly naphthalimide/perylene diimide (NDINH/PDINH) supramolecular photocatalysts were successfully synthesized via a rapid solution dispersion method. A giant internal electric field (IEF) in co-assembly structure was built by the larger local dipole. NDINH coated on PDINH could reduce the reflected electric field over PDINH to improve its responsive activity to ultraviolet light. Resultantly, an efficient full-spectrum photocatalytic overall water splitting activity with H2 and O2 evolution rate of 317.2 and 154.8 μmol g-1  h-1 for NDINH/PDINH together with optimized O2 evolution rate with 2.61 mmol g-1  h-1 using AgNO3 as a sacrificial reagent were achieved. Meanwhile, its solar-to-hydrogen efficiency was enhanced to 0.13 %. The enhanced photocatalytic activity was primarily attributed to the IEF between NDINH and PDINH, significantly accelerating transfer and separation of photogenerated carriers. Additionally, a direct Z-Scheme pathway of carriers contributed to a high redox potential. The strategy provided a new perspective for the design of supramolecular photocatalysts.

Criteria for Efficient Photocatalytic Water Splitting Revealed by Studying Carrier Dynamics in a Model Al-doped SrTiO3 Photocatalyst

Overall water splitting (OWS) using semiconductor photocatalysts is a promising method for solar fuel production. Achieving a high quantum efficiency is one of the most important prerequisites for photocatalysts to realize high solar-to-fuel efficiency. In a recent study (Nature 2020, 58, 411-414), a quantum efficiency of almost 100 % has been achieved in an aluminum-doped strontium titanate (SrTiO3  : Al) photocatalyst. Herein, using the SrTiO3  : Al as a model photocatalyst, we reveal the criteria for efficient photocatalytic water splitting by investigating the carrier dynamics through a comprehensive photoluminescence study. It is found that the Al doping suppresses the generation of Ti3+ recombination centers in SrTiO3 , the surface band bending facilitates charge separation, and the in situ photo-deposited Rh/Cr2 O3 and CoOOH co-catalysts render efficient charge extraction. By suppressing photocarrier recombination and establishing a facile charge separation and extraction mechanism, high quantum efficiency can be achieved even on photocatalysts with a very short (sub-ns) intrinsic photocarrier lifetime, challenging the belief that a long carrier lifetime is a fundamental requirement. Our findings could provide guidance on the design of OWS photocatalysts toward more efficient solar-to-fuel conversion.

Enhanced Electrocatalytic Water Oxidation by Interfacial Phase Transition and Photothermal Effect in Multiply Heterostructured Co9 S8 /Co3 S4 /Cu2 S Nanohybrids

The rational design of advanced nanohybrids (NHs) with optimized interface electronic environment and rapid reaction kinetics is pivotal to electrocatalytic schedule. Herein, we developed a multiple heterogeneous Co9 S8 /Co3 S4 /Cu2 S nanoparticle in which Co3 S4 germinates between Co9 S8 and Cu2 S. Using high-angle annular-dark-field imaging and theoretical calculation, it was found that the integration of Co9 S8 and Cu2 S tends to trigger the interface phase transition of Co9 S8 , leading to Co3 S4 interlayer due to the low formation energy of Co3 S4 /Cu2 S (-7.61 eV) than Co9 S8 /Cu2 S (-5.86 eV). Such phase transition not only lowers the energy barrier of oxygen evolution reaction (OER, from 0.335 eV to 0.297 eV), but also increases charge carrier density (from 7.76×1014 to 2.09×1015  cm-3 ), and creates more active sites. Compared to Co9 S8 and Cu2 S, the Co9 S8 /Co3 S4 /Cu2 S NHs also demonstrate notable photothermal effect that can heat the catalyst locally, offset the endothermic enthalpy change of OER, and promote carrier migrate, reaction intermediates adsorption/deprotonation to improve reaction kinetics. Profiting from these favorable factors, the Co9 S8 /Co3 S4 /Cu2 S catalyst only requires an OER overpotential of 181 mV and overall water splitting cell voltage of 1.43 V to driven 10 mA cm-2 under the irradiation of near-infrared light, outperforming those without light irradiation and many reported Co-based catalysts.

Bottom-up Synthesis of Single-Crystalline Poly (Triazine Imide) Nanosheets for Photocatalytic Overall Water Splitting

Poly (triazine imide) (PTI/Li+ Cl- ), one of the crystalline versions of polymeric carbon nitrides, holds great promise for photocatalytic overall water splitting. In principle, the photocatalytic activity of PTI/Li+ Cl- is closely related to the morphology, which could be reasonably tailored by the modulation of the polycondensation process. Herein, we demonstrate that the hexagonal prisms of PTI/Li+ Cl- could be converted to hexagonal nanosheets by adjusting the binary eutectic salts from LiCl/KCl or NaCl/LiCl to ternary LiCl/KCl/NaCl. Results reveal that the extension of in-plane conjugation is preferred, when the polymerisation was performed in the presence of ternary eutectic salts. The hexagonal nanosheets bears longer lifetimes of charge carriers than that of hexagonal prisms due to lower intensity of structure defects and shorter hopping distance of charge carriers along the stacking direction of triazine nanosheets. The optimized hexagonal nanosheets exhibits a record apparent quantum yield value of 25 % (λ=365 nm) for solar hydrogen production by one-step excitation overall water splitting.

Rh/Cr2 O3 and CoOx Cocatalysts for Efficient Photocatalytic Water Splitting by Poly (Triazine Imide) Crystals

In situ photo-deposition of both Pt and CoOx cocatalysts on the facets of poly (triazine imide) (PTI) crystals has been developed for photocatalytic overall water splitting. However, the undesired backward reaction (i.e., water formation) on the noble Pt surface is a spontaneously down-hill process, which restricts their efficiency to run the overall water splitting reaction. Herein, we demonstrate that the efficiency for photocatalytic overall water splitting could be largely promoted by the decoration of Rh/Cr2 O3 and CoOx as H2 and O2 evolution cocatalysts, respectively. Results reveal that the dual cocatalysts greatly extract charges from bulk to surface, while the Rh/Cr2 O3 cocatalyst dramatically restrains the backward reaction, achieving an apparent quantum efficiency (AQE) of 20.2 % for the photocatalytic overall water splitting reaction.

Constructing Built-in Electric Field in Heterogeneous Nanowire Arrays for Efficient Overall Water Electrolysis

Efficient bifunctional electrocatalysts for hydrogen and oxygen evolution reactions are key to water electrolysis. Herein, we report built-in electric field (BEF) strategy to fabricate a heterogeneous nickel phosphide-cobalt nanowire arrays grown on carbon fiber paper (Ni2P-CoCH/CFP) with large work function difference (ΔΦ) as bifunctional electrocatalysts for overall splitting. Impressively, Ni2P-CoCH/CFP exhibits a remarkable catalytic activity for hydrogen and oxygen reactions to obtain 10 mA cm-2, respectively. Moreover, the fabricated lab-scale electrolyzer driven by an AAA battery delivers excellent stability after 50 h electrocatalysis with a 100% faradic efficiency. Computational calculations combining with experiments reveal the interface-induced electric field effect facilitates asymmetrical charge distributions, thereby regulating the adsorption/desorption of the intermediates during reactions. This work offers an avenue to rationally design high-performance heterogeneous electrocatalysts.

The Directional Crystallization Process of Poly (triazine imide) Single Crystals in Molten Salts

Poly (triazine imide) photocatalysts prepared via molten salt methods emerge as promising polymer semiconductors with one-step excitation capacity of overall water splitting. Unveiling the molecular conjugation, nucleation, and crystallization processes of PTI crystals is crucial for their controllable structure design. Herein, microscopy characterization was conducted at the PTI crystallization front from meso to nano scales. The heptazine-based precursor was found to depolymerize to triazine monomers within molten salts and KCl cubes precipitate as the leading cores that guide the directional stacking of PTI molecular units to form aggregated crystals. Upon this discovery, PTI crystals with improved dispersibility and enhanced photocatalytic performance were obtained by tailoring the crystallization fronts. This study advances insights into the directional assembling of PTI monomers on salt templates, placing a theoretical foundation for the ordered condensation of polymer crystals.

Mimicking Photosynthesis: A Natural Z-Scheme Photocatalyst Constructed from Red Mud Bauxite Waste for Overall Water Splitting

All-solid-state Z-Scheme photocatalysts have attracted significant attention due to their great potential for solar fuel production. However, delicately coupling two individual semiconductors with a charge shuttle by a material strategy remains a challenge. Herein, we demonstrate a new protocol of natural Z-Scheme heterostructures by strategically engineering the component and interfacial structure of red mud bauxite waste. Advanced characterizations elucidated that the hydrogen-induced formation of metallic Fe enabled the effective Z-Scheme electron transfer from Fe2O3 to TiO2, leading to the significantly boosted spatial separation of photo-generated carriers for overall water splitting. To the best of our knowledge, it is the first Z-Scheme heterojunction based on natural minerals for solar fuel production. Thus our work provides a new avenue toward the utilization of natural minerals for advanced catalysis applications.

Recent Advances and Future Perspectives of Metal-Based Electrocatalysts for Overall Electrochemical Water Splitting

Recently, the growing demand for a renewable and sustainable fuel alternative is contingent on fuel cell technologies. Even though it is regarded as an environmentally sustainable method of generating fuel for immediate concerns, it must be enhanced to make it extraordinarily affordable, and environmentally sustainable. Hydrogen (H₂ ) synthesis by electrochemical water splitting (ECWS) is considered one of the foremost potential prospective methods for renewable energy output and H₂ society implementation. Existing massive H₂ output is mostly reliant on the steaming reformation of carbon fuels that yield CO₂ together with H₂ and is a finite resource. ECWS is a viable, efficient, and contamination-free method for H₂ evolution. Consequently, developing reliable and cost-effective technology for ECWS was a top priority for scientists around the globe. Utilizing renewable technologies to decrease total fuel utilization is crucial for H₂ evolution. Capturing and transforming the fuel from the ambient through various renewable solutions for water splitting (WS) could effectively reduce the need for additional electricity. ECWS is among the foremost potential prospective methods for renewable energy output and the achievement of a H₂ -based economy. For the overall water splitting (OWS), several transition-metal-based polyfunctional metal catalysts for both cathode and anode have been synthesized. Furthermore, the essential to the widespread adoption of such technology is the development of reduced-price, super functional electrocatalysts to substitute those, depending on metals. Many metal-premised electrocatalysts for both the anode and cathode have been designed for the WS process. The attributes of H₂ and oxygen (O₂ ) dynamics interactions on the electrodes of water electrolysis cells and the fundamental techniques for evaluating the achievement of electrocatalysts are outlined in this paper. Special emphasis is paid to their fabrication, electrocatalytic performance, durability, and measures for enhancing their efficiency. In addition, prospective ideas on metal-based WS electrocatalysts based on existing problems are presented. It is anticipated that this review will offer a straight direction toward the engineering and construction of novel polyfunctional electrocatalysts encompassing superior efficiency in a suitable WS technique.

Photocatalytic Overall Water Splitting Under Visible Light Enabled by a Particulate Conjugated Polymer Loaded with Palladium and Iridium

Polymer photocatalysts have received growing attention in recent years for photocatalytic hydrogen production from water. Most studies report hydrogen production with sacrificial electron donors, which is unsuitable for large‐scale hydrogen energy production. Here we show that the palladium/iridium oxide‐loaded homopolymer of dibenzo[b,d]thiophene sulfone (P10) facilitates overall water splitting to produce stoichiometric amounts of H₂ and O₂ for an extended period (>60 hours) after the system stabilized. These results demonstrate that conjugated polymers can act as single component photocatalytic systems for overall water splitting when loaded with suitable co‐catalysts, albeit currently with low activities. Transient spectroscopy shows that the IrO₂ co‐catalyst plays an important role in the generation of the charge separated state required for water splitting, with evidence for fast hole transfer to the co‐catalyst.

Air-Stable Mn doped CuCl/CuO Hybrid Triquetrous Nanoarrays as Bifunctional Electrocatalysts for Overall Water Splitting

The development of highly efficient non-precious metal catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is key for large-scale hydrogen evolution through water splitting technology. Here, we report an air-stable Cu-based nanostructure consisting of Mn doped CuCl and CuO (CuCl/CuO(Mn)-NF) as a dual functional electrocatalyst for water splitting. CuCl is identified as the main active component, together with Mn doping and the synergistic effect between CuCl and CuO are found to make responsibility for the excellent OER and HER catalytic activity and stability. The assembled electrolyzes also exhibit decent water splitting performance. This work not only provides a simple method for preparing Cu-based composite catalyst, but also demonstrates the great potential of Cu-based non-noble metal electrocatalysts for water splitting and other renewable energy conversion technologies.