Continuous on-line measurement of cerebral hydrogen peroxide using enzyme-modified ring-disk plastic carbon film electrode

Online ascorbate sensing reveals oxidative injury occurrence in inferior colliculus in salicylate-induced tinnitus animal model

Tinnitus is a widespread and serious clinical and social problem. Although oxidative injury has been suggested to be one of pathological mechanisms in auditory cortex, whether this mechanism could be applied to inferior colliculus remains unclear. In this study, we used an online electrochemical system (OECS) integrating in vivo microdialysis with selective electrochemical detector to continuously monitor the dynamics of ascorbate efflux, an index of oxidative injury, in inferior colliculus of living rats during sodium salicylate-induced tinnitus. We found that OECS with a carbon nanotubes (CNTs)-modified electrode as the detector selectively responses to ascorbate, which is free from the interference from sodium salicylate and MK-801 that were used to induce tinnitus animal model and investigate the N-methyl-d-aspartate (NMDA) receptor mediated excitotoxicity, respectively. With the OECS, we found that the extracellular ascorbate level in inferior colliculus significantly increases after salicylate administration and such increase was suppressed by immediate injection of NMDA receptor antagonist MK-801. In addition, we found that salicylate administration significantly increases the spontaneous and sound stimuli evoked neural activity in inferior colliculus and that the increases were inhibited by the injection of MK-801. These results suggest that oxidative injury may occur in inferior colliculus following salicylate-induced tinnitus, which is closely relevant to the NMDA-mediated neuronal excitotoxicity. This information is useful for understanding the neurochemical processes in inferior colliculus involved in tinnitus and its related brain diseases.

Electrodeposition of Silver Nanoparticles on Indium-Doped Tin Oxide Using Hydrogel Electrolyte for Hydrogen Peroxide Sensing

Nanoparticles are used in various fields, including fuel cells, energy conversion devices, and sensors, because of their large surface area and excellent catalytic properties. Although various methods of synthesizing nanoparticles are available, the most popular is the solution-phase reduction of metal ions. Electrodeposition is a method of reducing metal ions in solution and is widely used because of its various advantages. In this study, Ag nanoparticles with a narrow size distribution were evenly dispersed on the surface of an electrode by applying electrodeposition in an agarose hydrogel medium instead of in solution, confirming the feasibility of Ag deposition in agarose hydrogel, even at a lower reduction potential than that in solution. These results are attributed to the electrolyte effect owing to the hydrophilic backbone of the agarose hydrogel and the gel effect, which reduces unexpected convection. H₂O₂ was detected by using the Ag nanoparticles synthesized in agarose hydrogel, and the limit of detection for H₂O₂ was found to be 4.82 µM, with a dynamic range of 1-500 µM. The nanoparticle synthesis platform proposed in this study is expected to be actively used for the synthesis of other metal/nonmetal nanoparticles.

Efficient Electrochemical Microsensor for In Vivo Monitoring of H2O2 in PD Mouse Brain: Rational Design and Synthesis of Recognition Molecules

Hydrogen peroxide (H₂O₂), one of the most stable and abundant reactive oxygen species (ROS), acting as a modulator of dopaminergic signaling, has been intimately implicated in Parkinson's disease, creating a critical need for the selective quantification of H₂O₂ in the living brain. Current natural or nanomimic enzyme-based electrochemical methods employed for the determination of H₂O₂ suffer from inadequate selectivity and stability, due to which the in vivo measurement of H₂O₂ in the living brain remains a challenge. Herein, a series of 5-(1,2-dithiolan-3-yl)-N-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)pentanamide (DBP) derivatives were designed by tuning the substitute groups and sites of a boric acid ester, which served as probes to specifically react with H₂O₂. Consequently, the reaction products, 5-(1,2-dithiolan-3-yl)-N-(4-hydroxyphen-yl)pentanamide (DHP) derivatives, converted the electrochemical signal from inactive into active. After systematically evaluating their performances, 5-(1,2-dithiolan-3-yl)-N-(3-chloro-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)pentanamide (o-Cl-DBP) was finally identified as the optimized probe for H₂O₂ detection as it revealed the fastest reaction time, the largest current density, and the most negative potential. In addition, electrochemically oxidized graphene oxide (EOGO) was utilized to produce a stable inner reference. The designed electrochemical microsensor provided a ratiometric strategy for real-time tracking of H₂O₂ in a linear range of 0.5-600 μM with high selectivity and accuracy. Eventually, the efficient electrochemical microsensor was successfully applied to the measurement of H₂O₂ in Parkinson's disease (PD) mouse brain. The average levels of H₂O₂ in the cortex, striatum, and hippocampus in the normal mouse and PD mouse were systematically compared for the first time.

2D CTAB-MoSe2 Nanosheets and 0D MoSe2 Quantum Dots: Facile Top-Down Preparations and Their Peroxidase-Like Catalytic Activity for Colorimetric Detection of Hydrogen Peroxide

We report the facile and economic preparation of two-dimensional (2D) and 0D MoSe2 nanostructures based on systematic and non-toxic top-down strategies. We demonstrate the intrinsic peroxidase-like activity of these MoSe2 nanostructures. The catalytic processes begin with facilitated decomposition of H2O2 by using MoSe2 nanostructures as peroxidase mimetics. In turn, a large amount of generated radicals oxidizes 3,3,5,5-tetramethylbenzidine (TMB) to produce a visible color reaction. The enzymatic kinetics of our MoSe2 nanostructures complies with typical Michaelis-Menten theory. Catalytic kinetics study reveals a ping-pong mechanism. Moreover, the primary radical responsible for the oxidation of TMB was identified to be Ȯ2- by active species-trapping experiments. Based on the peroxidase mimicking property, we developed a new colorimetric method for H2O2 detection by using 2D and 0D MoSe2 nanostructures. It is shown that the colorimetric sensing capability of our MoSe2 catalysts is comparable to other 2D materials-based colorimetric platforms. For instance, the linear range of H2O2 detection is between 10 and 250 μM by using 2D functionalized MoSe2 nanosheets as an artificial enzyme. Our work develops a systematic approach to use 2D materials to construct novel enzyme-free mimetic for a visual assay of H2O2, which has promising prospects in medical diagnosis and food security monitoring.

Selective Functionalization Blended with Scaffold Conductivity in Graphene Acid Promotes H2O2 Electrochemical Sensing

The widespread industrial use of H₂O₂ has provoked great interest in the development of new and more efficient materials for its detection. Enzymatic electrochemical sensors have drawn particular attention, primarily because of their excellent selectivity. However, their high cost, instability, complex immobilization, and inherent tendency toward denaturation of the enzyme significantly limit their practical usefulness. Inspired by the powerful proton-catalyzed H₂O₂ reduction mechanism of peroxidases, we have developed a well-defined and densely functionalized carboxylic graphene derivative (graphene acid, GA) that serves as a proton source and conductive electrode for binding and detecting H₂O₂. An unprecedented H₂O₂ sensitivity of 525 μA cm^-2 mM^-1 is achieved by optimizing the balance between the carboxyl group content and scaffold conductivity of GA. Importantly, the GA sensor greatly outperforms all reported carbon-based H₂O₂ sensors and is superior to enzymatic ones because of its simple immobilization, low cost, and uncompromised sensitivity even after continuous operation for 7 days. In addition, GA-based sensing electrodes remain highly selective in the presence of interferents such as ascorbic acid, paracetamol, and glucose, as well as complex matrices such as milk. GA-based sensors thus have considerable potential for use in practical industrial sensing technologies.

Facile Bottom-up Preparation of WS2-Based Water-Soluble Quantum Dots as Luminescent Probes for Hydrogen Peroxide and Glucose

Photoluminescent zero-dimensional (0D) quantum dots (QDs) derived from transition metal dichalcogenides, particularly molybdenum disulfide, are presently in the spotlight for their advantageous characteristics for optoelectronics, imaging, and sensors. Nevertheless, up to now, little work has been done to synthesize and explore photoluminescent 0D WS2 QDs, especially by a bottom-up strategy without using usual toxic organic solvents. In this work, we report a facile bottom-up strategy to synthesize high-quality water-soluble tungsten disulfide (WS2) QDs through hydrothermal reaction by using sodium tungstate dihydrate and L-cysteine as W and S sources. Besides, hybrid carbon quantum dots/WS2 QDs were further prepared based on this method. Physicochemical and structural analysis of QD hybrid indicated that the graphitic carbon quantum dots with diameters about 5 nm were held onto WS2 QDs via electrostatic attraction forces. The resultant QDs show good water solubility and stable photoluminescence (PL). The excitation-dependent PL can be attributed to the polydispersity of the synthesized QDs. We found that the PL was stable under continuous irradiation of UV light but can be quenched in the presence of hydrogen peroxide (H2O2). The obtained WS2-based QDs were thus adopted as an electrodeless luminescent probe for H2O2 and for enzymatic sensing of glucose. The hybrid QDs were shown to have a more sensitive LOD in the case of glucose sensing. The Raman study implied that H2O2 causes the partial oxidation of QDs, which may lead to oxidation-induced quenching. Overall, the presented strategy provides a general guideline for facile and low-cost synthesis of other water-soluble layered material QDs and relevant hybrids in large quantity. These WS2-based high-quality water-soluble QDs should be promising for a wide range of applications in optoelectronics, environmental monitoring, medical imaging, and photocatalysis.

Papain-templated Cu nanoclusters: assaying and exhibiting dramatic antibacterial activity cooperating with H₂O₂

Herein, papain-functionalized Cu nanoclusters (CuNCs@Papain) were originally synthesized in aqueous solution together with a quantum yield of 14.3%, and showed obviously red fluorescence at 620 nm. Meanwhile, their corresponding fluorescence mechanism was fully elucidated by fluorescence spectroscopy, HR-TEM, FTIR spectroscopy, and XPS. Subsequently, the as-prepared CuNCs were employed as probes for detecting H2O2. Using CuNCs as probes, H2O2 was determined in the range from 1 μM to 50 μM based on a linear decrease of fluorescence intensity as well as a detection limit of 0.2 μM with a signal-to-noise ratio of 3. More significantly, it has been proved that CuNCs could convert H2O2 to ˙OH, which exhibited dramatic antibacterial activity. Both in vitro and in vivo experiments were performed to validate their antibacterial activity against Gram-positive/negative bacteria and actual wound infection, suggesting their potential for serving as one type of promising antibacterial material.

Stabilization of Prussian blue with polyaniline and carbon nanotubes in neutral media for in vivo determination of glucose in rat brains

This study demonstrates a new electrochemical microbiosensor for selectivein vivomonitoring of glucose in rat brains.

A multi-enzyme microreactor-based online electrochemical system for selective and continuous monitoring of acetylcholine

This study demonstrates an online electrochemical system (OECS) for selective and continuous measurements of acetylcholine (ACh) through efficiently integrating in vivo microdialysis, a multi-enzyme microreactor and an electrochemical detector.

A carbon dot-based fluorescence turn-on sensor for hydrogen peroxide with a photo-induced electron transfer mechanism

A carbon dot-based fluorescence turn-on sensor for hydrogen peroxide with a photo-induced electron transfer mechanism was developed.

A durable non-enzymatic electrochemical sensor for monitoring H2O2 in rat brain microdialysates based on one-step fabrication of hydrogels

A non-enzymatic electrochemical H₂O₂ sensor was developed by in situ fabrication of biocompatible chitosan hydrogels, in which a specific recognition molecule for H₂O₂ – thionine – was stably immobilized via one-step electrodeposition.

Online electrochemical systems for continuous neurochemical measurements with low-potential mediator-based electrochemical biosensors as selective detectors

This study demonstrates a new strategy to develop online electrochemical systems (OECSs) for continuously monitoring neurochemicals by efficiently integrating in vivo microdialysis with an oxidase-based electrochemical biosensor with low-potential electron mediators to shuttle the electron transfer of the oxidases.

A sensitive biosensor for the fluorescence detection of the acetylcholinesterase reaction system based on carbon dots

The carbon dots (C-dots) with high fluorescence quantum yield were prepared using hydrothermal method. C-dots have been adopted as probes for the fluorescence turn-off detection of H2O2 based on the special sensibility for the hydroxyl radical. And then the biosensors for the detection of substrate and enzymes activities were established in the acetylcholinesterase reaction system, which were related to the production of H2O2. Specifically, the proposed fluorescent biosensor was successfully applied to detect the concentration of choline (in the range from 0.025 to 50 μM) and acetylcholine (in the range from 0.050 to 50 μM), and the activity of choline oxidase (in the range from 1 to 75 U/L) and acetylcholinesterase (1 to 80 U/L). These results showed a sensitive, universal, nontoxic and eco-friendly detecting technique has been developed.

Investigating catalase activity through hydrogen peroxide decomposition by bacteria biofilms in real time using scanning electrochemical microscopy

Catalase activity through hydrogen peroxide decomposition in a 1 mM bulk solution above Vibrio fischeri (γ-Protebacteria-Vibrionaceae) bacterial biofilms of either symbiotic or free-living strains was studied in real time by scanning electrochemical microscopy (SECM). The catalase activity, in units of micromoles hydrogen peroxide decomposed per minute over a period of 348 s, was found to vary with incubation time of each biofilm in correlation with the corresponding growth curve of bacteria in liquid culture. Average catalase activity for the same incubation times ranging from 1 to 12 h was found to be 0.28 ± 0.07 μmol H2O2/min for the symbiotic biofilms and 0.31 ± 0.07 μmol H2O2/min for the free-living biofilms, suggesting similar catalase activity. Calculations based on Comsol Multiphysics simulations in fitting experimental biofilm data indicated that approximately (3 ± 1) × 10(6) molecules of hydrogen peroxide were decomposed by a single bacterium per second, signifying the presence of a highly active catalase. A 2-fold enhancement in catalase activity was found for both free-living and symbiotic biofilms in response to external hydrogen peroxide concentrations as low as 1 nM in the growth media, implying a similar mechanism in responding to oxidative stress.

Blood‐Glucose Biosensors, Development and Challenges

Diabetes mellitus is one of the major causes of premature illness and death worldwide. The World Health Organization estimated that by 2030, 439 million people, corresponding to 7.8% of the world adult population, will live with diabetes. With an increasing diabetic population, a Blood Glucose Monitoring System (BGMS) is becoming an ever important tool for diabetes management. The history of blood biosensor development can be traced back to 1932, when Warburg and Christian reported the “yellow enzyme” from yeast changed to colorless upon oxidizing its substrate and resumed the yellow color after its oxidation by oxygen. Since then a lot of research and development has taken place on blood glucose sensors, and the biosensor technology has gone through three generations, with the current commercially available BGMS predominantly relies on the second generation of technology. The advantages and challenges of each generation are discussed. This chapter will examine in detail topics covering the areas of electrode substrate and electrode material selection, fluid detection electrode, reaction chamber, chemistry (electrolyte, polymer, enzyme and mediator), detection method, analytical performance, regulatory requirements and the manufacturing process. The chapter will close with the clinical utility and future direction and application of glucose biosensor include a brief introduction to the Continuous Blood Glucose Monitoring System (CGMS).

Effects of the administration of a catalase inhibitor into the fourth cerebral ventricle on cardiovascular responses in spontaneously hypertensive rats exposed to sidestream cigarette smoke

OBJECTIVE

Previous studies have demonstrated a relationship between brain oxidative stress and cardiovascular regulation. We evaluated the effects of central catalase inhibition on cardiovascular responses in spontaneously hypertensive rats exposed to sidestream cigarette smoke.

METHODS

Male Wistar Kyoto (WKY) rats and spontaneously hypertensive rats (SH) (16 weeks old) were implanted with a stainless steel guide cannula leading into the fourth cerebral ventricle (4th V). The femoral artery and vein were cannulated for arterial pressure and heart rate measurement and drug infusion, respectively. The rats were exposed to sidestream cigarette smoke for 180 minutes/day, 5 days/week for 3 weeks (CO: 100-300 ppm). The baroreflex was tested using a pressor dose of phenylephrine (8 μg/kg, bolus) and a depressor dose of sodium nitroprusside (50 μg/kg, bolus). Cardiovascular responses were evaluated before and 5, 15, 30 and 60 minutes after injection of a catalase inhibitor (3-amino-1,2,4-triazole, 0.001 g/100 μL) into the 4th V.

RESULTS

Vehicle administration into the 4th V did not affect the cardiovascular response, whereas administration of the central catalase inhibitor increased the basal HR and attenuated the bradycardic peak (p<0.05) to a greater extent in WKY rats exposed to sidestream cigarette smoke than in WKY rats exposed to fresh air. However, in spontaneously hypertensive rats, the effect of the catalase inhibitor treatment was stronger in the fresh air condition (p<0.05).

CONCLUSION

Administration of a catalase inhibitor into the 4th V combined with exposure to sidestream cigarette smoke has a stronger effect in WKY rats than in SH rats.

Hybridization of bioelectrochemically functional infinite coordination polymer nanoparticles with carbon nanotubes for highly sensitive and selective in vivo electrochemical monitoring

This study demonstrates the formation of a three-dimensional conducting framework through hybridization of bioelectrochemically active infinite coordination polymer (ICP) nanoparticles with single-walled carbon nanotubes (SWNTs) for highly sensitive and selective in vivo electrochemical monitoring with combination with in vivo microdialysis. The bioelectrochemically active ICP nanoparticles are synthesized through the self-assembly process of NAD(+) and Tb(3+), in which all biosensing elements including an electrocatalyst (i.e., methylene green, MG), cofactor (i.e., β-nicotinamide adenine dinucleotide, NAD(+)), and enzyme (i.e., glucose dehydrogenase, GDH) are adaptively encapsulated. The ICP/SWNT-based biosensors are simply prepared by drop-coating the as-formed ICP/SWNT nanocomposite onto a glassy carbon substrate. Electrochemical studies demonstrate that the simply prepared ICP/SWNT-based biosensors exhibit excellent biosensing properties with a higher sensitivity and stability than the ICP-based biosensors prepared only with ICP nanoparticles (i.e., without hybridization of SWNTs). By using a GDH-based electrochemical biosensor as an example, we demonstrate a technically simple yet effective online electroanalytical platform for continuously monitoring glucose in the brain of guinea pigs with the ICP/SWNT-based biosensor as an online detector in a continuous-flow system combined with in vivo microdialysis. Under the experimental conditions employed here, the dynamic linear range for glucose with the ICP/SWNT-biosensor is from 50 to 1000 μM. Moreover, in vivo selectivity investigations with the biosensors prepared by the GDH-free ICPs reveal that ICP/SWNT-based biosensors are very selective for the measurement of glucose in the cerebral system. The basal level of glucose in the microdialysates from the striatum of guinea pigs is determined to be 0.31 ± 0.03 mM (n = 3). The study offers a simple route to the preparation of electrochemical biosensors, which is envisaged to be particularly useful for probing the chemical events involved in some physiological and pathological processes.

Rational design of surface/interface chemistry for quantitative in vivo monitoring of brain chemistry

To understand the molecular basis of brain functions, researchers would like to be able to quantitatively monitor the levels of neurochemicals in the extracellular fluid in vivo. However, the chemical and physiological complexity of the central nervous system (CNS) presents challenges for the development of these analytical methods. This Account describes the rational design and careful construction of electrodes and nanoparticles with specific surface/interface chemistry for quantitative in vivo monitoring of brain chemistry. We used the redox nature of neurochemicals at the electrode/electrolyte interface to establish a basis for monitoring specific neurochemicals. Carbon nanotubes provide an electrode/electrolyte interface for the selective oxidation of ascorbate, and we have developed both in vivo voltammetry and an online electrochemical detecting system for continuously monitoring this molecule in the CNS. Although Ca(2+) and Mg(2+) are involved in a number of neurochemical signaling processes, they are still difficult to detect in the CNS. These divalent cations can enhance electrocatalytic oxidation of NADH at an electrode modified with toluidine blue O. We used this property to develop online electrochemical detection systems for simultaneous measurements of Ca(2+) and Mg(2+) and for continuous selective monitoring of Mg(2+) in the CNS. We have also harnessed biological schemes for neurosensing in the brain to design other monitoring systems. By taking advantage of the distinct reaction properties of dopamine (DA), we have developed a nonoxidative mechanism for DA sensing and a system that can potentially be used for continuously sensing of DA release. Using "artificial peroxidase" (Prussian blue) to replace a natural peroxidase (horseradish peroxidase, HRP), our online system can simultaneously detect basal levels of glucose and lactate. By substituting oxidases with dehydrogenases, we have used enzyme-based biosensing schemes to develop a physiologically relevant system for detecting glucose and lactate in rat brain. Because of their unique optical properties and modifiable surfaces, gold nanoparticles (Au-NPs) have provided a platform of colorimetric assay for in vivo cerebral glucose quantification. We designed and modified the surfaces of Au-NPs and then used a sequence of reactions to produce hydroxyl radicals from glucose.

Sidestream cigarette smoke effects on cardiovascular responses in conscious rats: involvement of oxidative stress in the fourth cerebral ventricle

Background

Cigarette exposure increases brain oxidative stress. The literature showed that increased brain oxidative stress affects cardiovascular regulation. However, no previous study investigated the involvement of brain oxidative stress in animals exposed to cigarette and its relationship with cardiovascular regulation. We aimed to evaluate the effects of central catalase inhibition on baroreflex and cardiovascular responses in rats exposed to sidestream cigarette smoke (SSCS).

Methods

We evaluated males Wistar rats (320-370 g), which were implanted with a stainless steel guide cannula into the fourth cerebral ventricle (4th V). Femoral artery and vein were cannulated for mean arterial pressure (MAP) and heart rate (HR) measurement and drug infusion, respectively. Rats were exposed to SSCS during three weeks, 180 minutes, 5 days/week (CO: 100-300 ppm). Baroreflex was tested with a pressor dose of phenylephrine (PHE, 8 μg/kg, bolus) to induce bradycardic reflex and a depressor dose of sodium nitroprusside (SNP, 50 μg/kg, bolus) to induce tachycardic reflex. Cardiovascular responses were evaluated before, 5, 15, 30 and 60 minutes after 3-amino-1,2,4-triazole (ATZ, catalase inhibitor, 0.001 g/100 μL) injection into the 4th V.

Results

Central catalase inhibition increased basal HR in the control group during the first 5 minutes. SSCS exposure increased basal HR and attenuated bradycardic peak during the first 15 minutes.

Conclusion

We suggest that SSCS exposure affects cardiovascular regulation through its influence on catalase activity.

Electrokinetic gated injection-based microfluidic system for quantitative analysis of hydrogen peroxide in individual HepG2 cells

A microfluidic system to determine hydrogen peroxide (H(2)O(2)) in individual HepG2 cells based on the electrokinetic gated injection was developed for the first time. A home-synthesized fluorescent probe, bis(p-methylbenzenesulfonate)dichlorofluorescein (FS), was employed to label intracellular H(2)O(2) in the intact cells. On a simple cross microchip, multiple single-cell operations, including single cell injection, cytolysis, electrophoresis separation and detection of H(2)O(2), were automatically carried out within 60 s using the electrokinetic gated injection and laser-induced fluorescence detection (LIFD). The performance of the method was evaluated under the optimal conditions. The linear calibration curve was over a range of 4.39-610 amol (R(2)=0.9994). The detection limit was 0.55 amol or 9.0×10(-10) M (S/N=3). The relative standard deviations (RSDs, n=6) of migration time and peak area were 1.4% and 4.8%, respectively. With the use of this method, the average content of H(2)O(2) in single HepG2 cells was found to be 16.09±9.84 amol (n=15). Separation efficiencies in excess of 17,000 theoretical plates for the cells were achieved. These results demonstrated that the efficient integration and automation of these single-cell operations enabled the sensitive, reproducible, and quantitative examination of intracellular H(2)O(2) at single-cell level. Owing to the advantages of simple microchip structure, controllable single-cell manipulation and ease in building, this platform provides a universal way to automatically determine other intracellular constituents within single cells.

Real-time mapping of a hydrogen peroxide concentration profile across a polymicrobial bacterial biofilm using scanning electrochemical microscopy

Quantitative detection of hydrogen peroxide in solution above a Streptococcus gordonii (Sg) bacterial biofilm was studied in real time by scanning electrochemical microscopy (SECM). The concentration of hydrogen peroxide was determined to be 0.7 mM to 1.6 mM in the presence of 10 mM glucose over a period of 2 to 8 h. The hydrogen peroxide production measured was higher near the biofilm surface in comparison to Sg grown planktonically. Differential hydrogen peroxide production was observed both by fluorometric as well as by SECM measurements. The interaction between two different species in a bacterial biofilm of Sg and Aggregatibacter actinomycetemcomitans (Aa) in terms of hydrogen peroxide production was also studied by SECM. One-directional y-scan SECM measurements showed the unique spatial mapping of hydrogen peroxide concentration across a mixed species biofilm and revealed that hydrogen peroxide concentration varies greatly dependent upon local species composition.

Physiologically relevant online electrochemical method for continuous and simultaneous monitoring of striatum glucose and lactate following global cerebral ischemia/reperfusion

This study demonstrates a new electroanalytical method with a high physiological relevance for simultaneous online monitoring of glucose and lactate in the striatum of the rat brain following global cerebral ischemia/reperfusion. The online analytical method is based on the efficient integration of in vivo microdialysis sampling with an online selective electrochemical detection with the electrochemical biosensors with dehydrogenases, i.e., glucose and lactate dehydrogenases, as recognition elements. The dehydrogenase-based electrochemical biosensors are developed onto the dual split-disk plastic carbon film (SPCF) electrodes with methylene green (MG) adsorbed onto single-walled carbon nanotubes (SWNTs) as the electrocatalyst for the oxidation of dihydronicotiamide adenine dinucleotide (NADH) at a low potential of 0.0 V (vs Ag/AgCl). Artificial cerebrospinal fluid (aCSF) containing NAD(+) is externally perfused from a second pump and online mixed with the brain microdialysates to minimize the variation of pH that occurred following the cerebral ischemia/reperfusion and to supply NAD(+) cofactor and O(2) for the enzymatic reactions of dehydrogenases and ascorbate oxidase, respectively. As a result, the developed online electroanalytical method exhibits a high selectivity against the electrochemically active species endogenously existing in the cerebral systems and a high tolerance against the variation of pH and O(2) following cerebral ischemia/reperfusion. This property, along with the good linearity and a high stability toward glucose and lactate as well as little cross-talk between two biosensors, substantially makes this method possible for the continuous, simultaneous, and online monitoring of glucose and lactate in the rat brain following global cerebral ischemia/reperfusion. This study establishes a new and effective platform for the investigation of the energy metabolism in physiological and pathological processes.

Electrochemical biosensor for the detection of H2O2 from living cancer cells based on ZnO nanosheets

In this work, direct electron transfer of cytochrome c (cyt. c)--a model for studying the electron transfer of enzymes is achieved at hexagonal ZnO nanosheets by one-step electrodeposition. UV-vis spectra and electrochemical data demonstrate that such ZnO nanosheets can supply a bio-compatible surface to keep the bioactivity of cyt. c. The redox formal potential (E(0)') of cyt. c is estimated to be 338.2+/-4.3 mV (vs. AgAgCl) at the nanostructured ZnO surface. This value is much more positive than those of enzymes previously obtained at other metal oxides and zeolite surfaces. Experiment data show, under the optimized potential of 0.0 V (vs. AgAgCl), the electrochemical determination of H(2)O(2) is free from not only anodic interferences like ascorbic acid (AA) and dopamine (DA), but also a cathodic interference-O(2). Such an excellent selectivity enable the present H(2)O(2) biosensor determine the extracellular H(2)O(2) released from living human hepatoma cells.