Capillary Electrochromatography Coupled to Atmospheric Pressure Photoionization Mass Spectrometry for Methylated Benzo[a]pyrene Isomers

Recent developments in atmospheric pressure photoionization-mass spectrometry

Recent developments in atmospheric pressure photoionization (APPI), which is one of the three most important ionization techniques in liquid chromatography-mass spectrometry, are reviewed. The emphasis is on the practical aspects of APPI analysis, its combination with different separation techniques, novel instrumental developments - especially in gas chromatography and ambient mass spectrometry - and the applications that have appeared in 2009-2014. © 2015 Wiley Periodicals, Inc. Mass Spec Rev 36:423-449, 2017.

Chiral Capillary Electrophoresis-Mass Spectrometry: Developments and Applications in the Period 2010-2015: A Review

The sensitive detection of chiral compounds by capillary electrophoresis (CE) in biological samples remains a significant challenge and is currently considered a bottleneck in many chiral analysis projects. Chiral CE-MS can significantly improve the limit of detection and provide high sensitivity compared with chiral CE-UV. Chiral selectors such as modified cyclodextrins (CDs) and polymeric surfactants (a.k.a. molecular micelles, M_oM_s) in electrokinetic chromatography (EKC), micellar electrokinetic chromatography (MEKC) and capillary electrochromatography (CEC) have been developed to address the need for high sensitivity by CE-MS. However, several problems remain to be investigated to fully understand the potential of these hyphenation modes. This review provides introduction to major chiral CE-MS modes for the novice and highlights the important working principles of each mode of chiral CE-MS. Next, recent practical developments and progress in chiral CE-MS dating from January 2010 to September 2015 are described. The achievements in clinical and biomedical sciences using a variety of chiral selectors such as CDs and M_oM_s in EKC-MS, MEKC-MS and CEC-MS are discussed. Finally, conclusions and future prospects of CE-MS in chiral analysis are drafted.

A critique on the structural analysis of lignins and application of novel tandem mass spectrometric strategies to determine lignin sequencing

This review is devoted to the application of MS using soft ionization methods with a special emphasis on electrospray ionization, atmospheric pressure photoionization and matrix-assisted laser desorption/ionization MS and tandem MS (MS/MS) for the elucidation of the chemical structure of native and modified lignins. We describe and critically evaluate how these soft ionization methods have contributed to the present-day knowledge of the structure of lignins. Herein, we will introduce new nomenclature concerning the chemical state of lignins, namely, virgin released lignins (VRLs) and processed modified lignins (PML). VRLs are obtained by liberation of lignins through degradation of vegetable matter by either chemical hydrolysis and/or enzymatic hydrolysis. PMLs are produced by subjecting the VRL to a series of further chemical transformations and purifications that are likely to alter their original chemical structures. We are proposing that native lignin polymers, present in the lignocellulosic biomass, are not made of macromolecules linked to cellulose fibres as has been frequently reported. Instead, we propose that the lignins are composed of vast series of linear related oligomers, having different lengths that are covalently linked in a criss-cross pattern to cellulose and hemicellulose fibres forming the network of vegetal matter. Consequently, structural elucidation of VRLs, which presumably have not been purified and processed by any other type of additional chemical treatment and purification, may reflect the structure of the native lignin. In this review, we present an introduction to a MS/MS top-down concept of lignin sequencing and how this technique may be used to address the challenge of characterizing the structure of VRLs. Finally, we offer the case that although lignins have been reported to have very high or high molecular weights, they might not exist on the basis that such polymers have never been identified by the mild ionizing techniques used in modern MS.

Development of a fritless packed column for capillary electrochromatography-mass spectrometry

A novel procedure was developed for the fabrication of a fritless packed column for the coupling of capillary electrochromatography (CEC) to mass spectrometry (MS). The process involved the formation of internal tapers on two separate columns. Once the internal tapers are formed and the columns are packed, the untapered ends of each column were joined together by a commercially available connector. Several advantages of the fritless columns are described. First, the design used here eventually eliminates the need for any frits thus reducing the possibility of bubble formation seen with fritted packed columns. In addition, this is the first report in which the internal tapers are formed at both the inlet and outlet column ends making the fritless CEC-MS column more robust compared to only one report with externally tapered counterparts. Second, a comparison of internally tapered single frit packed CEC-MS (previously developed in our laboratory) column versus fritless CEC-MS column reported here shows that the latter provides better efficiency, suggesting no dead volume with equally good sensitivity and chiral resolution of (±)-aminoglutethimide. The fritless column procedure is universal and was used to prepare a series of columns with a variety of commercially available packing material (mixed mode strong cation exchange, SCX; mixed mode strong anion exchange, SAX; C-18) for the separation and MS detection of short chain non-chromophoric polar amines, long chain nonchromophic anionic surfactant as well as oligomers of non-chromophoric non-ionic surfactants, respectively. The fritless columns showed good intra-day repeatability and inter-day reproducibility of retention times, chiral and achiral resolutions and peak areas. Very satisfactory column-to-column and operator-to-operator reproducibility was demonstrated.

Chiral micellar electrokinetic chromatography-atmospheric pressure photoionization of benzoin derivatives using mixed molecular micelles

In the present work we report, for the first time, the successful on-line coupling of chiral MEKC (CMEKC) to atmospheric pressure photoionization MS (APPI-MS). Four structurally similar neutral test solutes (e.g. benzoin (BNZ) derivatives) were successfully ionized by APPI-MS. The mass spectra in the positive ion mode showed that the protonated molecular ions of BNZs are not the most abundant fragment ions. Simultaneous enantioseparation by CMEKC and on-line APPI-MS detection of four photoinitiators, hydrobenzoin, BNZ, benzoin methyl ether, benzoin ethyl ether, were achieved using an optimized molar ratio of mixed molecular micelle of two polymeric chiral surfactants (polysodium N-undecenoxy carbonyl-L-leucinate and polysodium N-undecenoyl-L,L-leucylvalinate). The CMEKC conditions, such as voltage, chiral polymeric surfactant concentration, buffer pH, and BGE concentration, were optimized using a multivariate central composite design (CCD). The sheath liquid composition (involving %v/v methanol, dopant concentration, electrolyte additive concentration, and flow rate) and spray chamber parameters (drying gas flow rate, drying gas temperature, and vaporizer temperature) were also optimized with CCD. Models built based on the CCD results and response surface method were used to analyze the interactions between factors and their effects on the responses. The final overall optimum conditions for CMEKC-APPI-MS were also predicted and found in agreement with the experimentally optimized parameters.

CEC-atmospheric pressure ionization MS of pesticides using a surfactant-bound monolithic column

A surfactant bound poly (11-acrylaminoundecanoic acid-ethylene dimethacrylate) monolithic column was simply prepared by in situ co-polymerization of 11-acrylaminoundecanoic acid and ethylene dimethacrylate with 1-propanol, 1,4-butanediol and water as porogens in 100 microm id fused-silica capillary in one step. This column was used in CEC-atmospheric pressure photoionization (APPI)-MS system for separation and detection of N-methylcarbamates pesticides. Numerous parameters are optimized for CEC-APPI-MS. After evaluation of the mobile phase composition, sheath liquid composition and the monolithic capillary outlet position, a fractional factorial design was selected as a screening procedure to identify factors of ionization source parameters, such as sheath liquid flow rate, drying gas flow rate, drying gas temperature, nebulizing gas pressure, vaporizer temperature and capillary voltage, which significantly influence APPI-MS sensitivity. A face-centered central composite design was further utilized to optimize the most significant parameters and predict the best sensitivity. Under optimized conditions, S/Ns around 78 were achieved for an injection of 100 ng/mL of each pesticide. Finally, this CEC-APPI-MS method was successfully applied to the analysis of nine N-methylcarbamates in spiked apple juice sample after solid phase extraction with recoveries in the range of 65-109%.

[Recent advances in capillary electrochromatography and its coupling techniques]

As a novel micro-separation technique, capillary electrochromatography (CEC) has the merits of high efficiency, high selectivity, high resolution and rapid analysis. However, the small-volume injection manipulated in capillary dimensions poses a great challenge for detectors in achieving high sensitivity. Currently, one of the major researches into CEC involves the development of some sensitive detection modes. The general introduction, which includes the historical perspectives and the principles of CEC, is briefly described. The recent advances about CEC coupled with various detectors and its applications in the separation of complex samples are summarized. A total of 141 references are reviewed.

Design and evaluation of a dopant-delivery system for an orthogonal atmospheric-pressure photoionization source and its performance in the analysis of polycyclic aromatic hydrocarbons

Atmospheric-pressure photoionization (APPI) mass spectrometry benefits from the addition of an ionization-enhancing dopant such as benzene. A passive dopant-delivery system has therefore been designed for use with the orthogonal APPI source within a commercial liquid chromatographic instrument with mass spectrometric detector. By providing the dopant in the gas phase, the newly designed equipment avoids mixing problems and other difficulties associated with liquid dopant addition. The system is a simple and durable design that can reliably deliver virtually any dopant with sufficient vapor pressure in the temperature range of 20 to 120 degrees C. At the optimum dopant flow rate (10% of the mobile phase flow rate) for high-performance liquid chromatography with narrow-bore (2.1 mm) columns, the system allows for uninterrupted routine analysis for up to two weeks. The performance of the device has been evaluated with benzene as dopant and with a test mixture consisting of four polycyclic aromatic hydrocarbons (PAH): naphthalene, 9H-fluorene, anthracene, and phenanthrene. All four PAH can be detected with an excellent signal-to-noise ratio in the scanning mode and a limit of detection down to 0.42 ng on column (51 pg in single-ion monitoring mode). The concentration calibration curves are linear over a range of three orders of magnitude, with correlation coefficients greater than 0.99. The utilization of benzene as dopant not only increases the sensitivity significantly - 20-fold, compared with dopant-free operation - but the low m/z values of the background ions observed also allow for the effective quantitative and qualitative analysis of PAH.

Recent advances in the methodology, optimisation and application of MEEKC

MEEKC is an electrodriven separation technique. Oil-in-water microemulsions (MEs) and to a lesser extent water-in-oil MEs have been used in MEEKC as BGEs to achieve separation of a diverse range of solutes. The more common (oil-in-water) MEs are composed of nanometre-sized droplets of oil suspended in an aqueous buffer. Interfacial tension between the oil and aqueous phase is reduced close to zero by the presence of a surfactant and a co-surfactant. MEEKC is capable of providing fast and efficient separations for a wide range of acidic, basic and neutral, water-soluble and -insoluble compounds. This review details the advances in MEEKC-based separations from the period 2006 to 2008. Areas covered include online sample concentration, chiral separation, suppressed electroosmosis MEEKC, MEEKC-MS, and the use of MEEKC in predicting migration behaviour and solute characteristics. A fundamental introduction to MEEKC, along with the presentation and discussion of recent applications is also included.

Coupling CE with atmospheric pressure photoionization MS for pharmaceutical basic compounds: Optimization of operating parameters

The use of CE coupled with MS (CE-MS) has evolved as a useful tool to analyze charged species in small sample volumes. Because of its sensitivity, versatility and ease of implementation, the ESI interface is currently the method of choice to hyphenate CE to MS. An alternative can be the atmospheric pressure photoionization (APPI) source, however, numerous parameters must be optimized for its coupling to CE. After evaluation of the sheath liquid composition and the CE capillary outlet position, an experimental design methodology was assessed for optimizing other ionization source parameters, such as sheath liquid flow rate, drying gas flow rate and temperature, nebulizing gas pressure, vaporizer temperature, and capillary voltage. For this purpose, a fractional factorial design (FFD) was selected as a screening procedure to identify factors which significantly influence sensitivity and efficiency. A face-centered central composite design (CCD) was then used to predict and optimize sensitivity, taking into account the most relevant variables. Sensitivity was finally evaluated with the optimized conditions and height-to-noise ratios (H/N) around 10 were achieved for an injection of 200 ng/mL of each analyte.

Development of in-tube solid-phase microextraction coupled to pressure-assisted CEC and its application to the analysis of propranolol enantiomers in human urine

A successful hyphenation of in-tube solid-phase microextraction (SPME) and pressure-assisted CEC (pCEC) was developed by installing a poly(methacrylic acid-co-ethylene glycol dimethacrylate) monolithic capillary to the six-port valve in a CEC system. The device designed was appropriate for on-line in-tube SPME coupled to pCEC or muHPLC. The evaluation of this hyphenation was first carried out for in-tube SPME-muHPLC with analytical capillaries packed with 3 microm octadecyl silica (ODS). Theobromine (TB), theophylline (TP), and caffeine (CA) were chosen as model drugs for an easy comparison with the results obtained by in tube SPME-HPLC. The detection limits of these three analytes were improved more than 100 times when compared with the direct analysis by muHPLC. Then in-tube SPME-pCEC with CEC capillaries packed with perphenylcarbamoylated beta-CD-bonded silica particles was applied to the determination and analysis of propranolol enantiomers in human urine. Under optimal extraction and separation conditions, the experimental LODs were 4 and 7 ng/mL for (S)-propranolol and (R)-propranolol, respectively. The calibration curves showed good linearity for both (S)-propranolol (R(2) = 0.9997) and (R)-propranolol (R(2) = 0.9996) over the concentration range from 20 to 5000 ng/mL. Reproducibility of the method was also investigated with intra- and interday precisions lower than 10% for both enantiomers at different concentration levels.