Aptamer-based detection of plasma proteins by an electrochemical assay coupled to magnetic beads

Interfacial reactivity-modulated fluorescent metal-organic frameworks for sensitive detection of interferon-γ towards tuberculosis diagnosis

A new aptamer-based method has been developed for interferon-γ (IFN-γ) detection by utilizing interface reactivity-modulated fluorescent metal-organic frameworks (MOFs). Specifically, the binding of IFN-γ to its aptamer decreases the interface reactivity between the biotin-labeled aptamer and the streptavidin-functionalized magnetic beads by generating significant steric effects. As a result, several biotin-labeled aptamers escape from the enrichment of magnetic beads and remain in the supernatant, which subsequently undergo the terminal deoxynucleotidyl transferase-catalyzed polymerization elongation. Along with the elongation, pyrophosphate is continuously produced as the by-product, triggering the decomposition of fluorescent MOFs to generate a remarkable fluorescent response with the excitation/emission wavelength of 610 nm/685 nm. Experimental results show that the method enables the detection of IFN-γ in the range 0.06 fM to 6 pM with a detection limit of 0.057 fM. The method also displays high specificity and repeatability with an average relative standard deviation of 2.04%. Moreover, the method demonstrates satisfactory recoveries from 96.3 to 105.5% in serum samples and excellent utility in clinical blood samples. Therefore, this work may provide a valuable tool for IFN-γ detection and is expected to be of high potential in tuberculosis diagnosis in the future.

Nanotechnology in coronary heart disease

Coronary heart disease (CHD) is one of the major causes of death and disability worldwide, especially in low- and middle-income countries and among older populations. Conventional diagnostic and therapeutic approaches have limitations such as low sensitivity, high cost and side effects. Nanotechnology offers promising alternative strategies for the diagnosis and treatment of CHD by exploiting the unique properties of nanomaterials. In this review, we use bibliometric analysis to identify research hotspots in the application of nanotechnology in CHD and provide a comprehensive overview of the current state of the art. Nanomaterials with enhanced imaging and biosensing capabilities can improve the early detection of CHD through advanced contrast agents and high-resolution imaging techniques. Moreover, nanomaterials can facilitate targeted drug delivery, tissue engineering and modulation of inflammation and oxidative stress, thus addressing multiple aspects of CHD pathophysiology. We discuss the application of nanotechnology in CHD diagnosis (imaging and sensors) and treatment (regulation of macrophages, cardiac repair, anti-oxidative stress), and provide insights into future research directions and clinical translation. This review serves as a valuable resource for researchers and clinicians seeking to harness the potential of nanotechnology in the management of CHD. STATEMENT OF SIGNIFICANCE: Coronary heart disease (CHD) is the one of leading cause of death and disability worldwide. Nanotechnology offers new strategies for diagnosing and treating CHD by exploiting the unique properties of nanomaterials. This review uses bibliometric analysis to uncover research trends in the use of nanotechnology for CHD. We discuss the potential of nanomaterials for early CHD detection through advanced imaging and biosensing, targeted drug delivery, tissue engineering, and modulation of inflammation and oxidative stress. We also offer insights into future research directions and potential clinical applications. This work aims to guide researchers and clinicians in leveraging nanotechnology to improve CHD patient outcomes and quality of life.

Aptamer-based colorimetric and lateral flow assay approaches for the detection of toxic metal ions, thallium(i) and lead(ii)

Thallium(i) and lead(ii) ions are heavy metals and extremely toxic. These metals are environmental pollutants, posing a severe risk to the environment and human health. In this study, two approaches were examined using aptamer and nanomaterial-based conjugates for thallium and lead detection. The first approach utilized an in-solution adsorption-desorption approach to develop colorimetric aptasensors for the detection of thallium(i) and lead(ii) using gold or silver nanoparticles. The second approach was the development of lateral flow assays, and their performance was tested with thallium (limit of detection is 7.4 μM) and lead ion (limit of detection is 6.6 nM) spiked into real samples. The approaches assessed are rapid, inexpensive, and time efficient with the potential to become the basis for future biosensor devices.

Electrochemical DNAzyme-based biosensors for disease diagnosis

DNAzyme-based electrochemical biosensors provide exceptional analytical sensitivity and high target recognition specificity for disease diagnosis. This review provides a critical perspective on the fundamental and applied impact of incorporating DNAzymes in the field of electrochemical biosensing. Specifically, we highlight recent advances in creating DNAzyme-based electrochemical biosensors for diagnosing infectious diseases, cancer and regulatory diseases. We also develop an understanding of challenges around translating the research in the field of DNAzyme-based electrochemical biosensors from labs to clinics, followed by a discussion on different strategies that can be applied to enhance the performance of the currently existing technologies to create truly point-of-care electrochemical DNAzyme biosensors.

Target-Synergized Biologically Mediated RAFT Polymerization for Electrochemical Aptasensing of Femtomolar Thrombin

The assay of thrombin levels is integral to the assessment of coagulation function and clinical screening of coagulation disorder-related diseases. In this work, we illustrate the ingenious use of the target-synergized biologically mediated reversible addition-fragmentation chain transfer (RAFT) polymerization (tsBMRP) as a novel amplification strategy for the electrochemical aptamer-based biosensing of thrombin at the femtomolar levels. Briefly, the tsBMRP-based strategy relies on the boronate affinity-mediated decoration of the glycan chain(s) of the target itself with RAFT agents and the subsequent recruitment of signal labels via BMRP, mediated by the direct reduction of RAFT agents by NADH into initiating/propagating radicals. Obviously, the tsBMRP-based strategy is biologically friendly, low-cost, and simple in operation. As thrombin is a glycoconjugate, its electrochemical aptasensing involves the use of the thrombin-binding aptamer (TBA) as the recognition receptor, the site-specific decoration of RAFT agents to the glycan chain of thrombin via boronate affinity, and further the recruitment of ferrocene signal labels via the BMRP of ferrocenylmethyl methacrylate (FcMMA). As boronate affinity results in the decoration of each glycan chain with tens of RAFT agents while BMRP recruits hundreds of signal labels to each RAFT agent-decorated site, the tsBMRP-based strategy allows us to detect thrombin at a concentration of 35.3 fM. This electrochemical aptasensor is highly selective, and its applicability to thrombin detection in serum samples has been further demonstrated. The merits of high sensitivity and selectivity, low cost, good anti-interference capability, and simple operation make the tsBMRP-based electrochemical thrombin aptasensor great promise in biomedical and clinical applications.

Aptamer-based CRISPR-Cas powered diagnostics of diverse biomarkers and small molecule targets

CRISPR-Cas systems have been widely used in genome editing and transcriptional regulation. Recently, CRISPR-Cas effectors are adopted for biosensor construction due to its adjustable properties, such as simplicity of design, easy operation, collateral cleavage activity, and high biocompatibility. Aptamers' excellent sensitivity, specificity, in vitro synthesis, base-pairing, labeling, modification, and programmability has made them an attractive molecular recognition element for inclusion in CRISPR-Cas systems. Here, we review current advances in aptamer-based CRISPR-Cas sensors. We briefly discuss aptamers and the knowledge of Cas effector proteins, crRNA, reporter probes, analytes, and applications of target-specific aptamers. Next, we provide fabrication strategies, molecular binding, and detection using fluorescence, electrochemical, colorimetric, nanomaterials, Rayleigh, and Raman scattering. The application of CRISPR-Cas systems in aptamer-based sensing of a wide range of biomarkers (disease and pathogens) and toxic contaminants is growing. This review provides an update and offers novel insights into developing CRISPR-Cas-based sensors using ssDNA aptamers with high efficiency and specificity for point-of-care setting diagnostics.

Black Phosphorous Aptamer-based Platform for Biomarker Detection

Black phosphorus nanostructures (nano-BPs) mainly include BP nanosheets (BP NSs), BP quantum dots (BPQDs), and other nano-BPs-based particles at nanoscale. Firstly discovered in 2014, nano-BPs are one of the most popular nanomaterials. Different synthesis methods are discussed in short to understand the basic concepts and developments in synthesis. Exfoliated nano-BPs, i.e. nano-BPs possess high surface area, high photothermal conversion efficacy, excellent biocompatibility, high charge carrier mobility (~1000 cm^-2V^-1s^-1), thermal conductivity of 86 Wm^-1K^-1; and these properties make it a highly potential candidate for fabrication of biosensing platform. These properties enable nano-BPs to be promising photothermal/drug delivery agents as well as in electrochemical data storage devices and sensing devices; and in super capacitors, photodetectors, photovoltaics and solar cells, LEDs, super-conductors, etc. Early diagnosis is very critical in the health sector scenarios. This review attempts to highlight the attempts made towards attaining stable BP, BP-aptamer conjugates for successful biosensing applications. BP-aptamer- based platforms are reviewed to highlight the significance of BP in detecting biological and physiological markers of cardiovascular diseases and cancer; to be useful in disease diagnosis and management.

Overview on the Design of Magnetically Assisted Electrochemical Biosensors

Electrochemical biosensors generally require the immobilization of recognition elements or capture probes on the electrode surface. This may limit their practical applications due to the complex operation procedure and low repeatability and stability. Magnetically assisted biosensors show remarkable advantages in separation and pre-concentration of targets from complex biological samples. More importantly, magnetically assisted sensing systems show high throughput since the magnetic materials can be produced and preserved on a large scale. In this work, we summarized the design of electrochemical biosensors involving magnetic materials as the platforms for recognition reaction and target conversion. The recognition reactions usually include antigen-antibody, DNA hybridization, and aptamer-target interactions. By conjugating an electroactive probe to biomolecules attached to magnetic materials, the complexes can be accumulated near to an electrode surface with the aid of external magnet field, producing an easily measurable redox current. The redox current can be further enhanced by enzymes, nanomaterials, DNA assemblies, and thermal-cycle or isothermal amplification. In magnetically assisted assays, the magnetic substrates are removed by a magnet after the target conversion, and the signal can be monitored through stimuli-response release of signal reporters, enzymatic production of electroactive species, or target-induced generation of messenger DNA.

A Folding-Based Electrochemical Aptasensor for the Single-Step Detection of the SARS-CoV-2 Spike Protein

Efficient and timely testing has taken center stage in the management, control, and monitoring of the current COVID-19 pandemic. Simple, rapid, cost-effective diagnostics are needed that can complement current polymerase chain reaction-based methods and lateral flow immunoassays. Here, we report the development of an electrochemical sensing platform based on single-walled carbon nanotube screen-printed electrodes (SWCNT-SPEs) functionalized with a redox-tagged DNA aptamer that specifically binds to the receptor binding domain of the SARS-CoV-2 spike protein S1 subunit. Single-step, reagentless detection of the S1 protein is achieved through a binding-induced, concentration-dependent folding of the DNA aptamer that reduces the efficiency of the electron transfer process between the redox tag and the electrode surface and causes a suppression of the resulting amperometric signal. This aptasensor is specific for the target S1 protein with a dissociation constant (K_D) value of 43 ± 4 nM and a limit of detection of 7 nM. We demonstrate that the target S1 protein can be detected both in a buffer solution and in an artificial viral transport medium widely used for the collection of nasopharyngeal swabs, and that no cross-reactivity is observed in the presence of different, non-target viral proteins. We expect that this SWCNT-SPE-based format of electrochemical aptasensor will prove useful for the detection of other protein targets for which nucleic acid aptamer ligands are made available.

Theranostic applications of stimulus-responsive systems based on Fe2O3

According to the interaction of nanoparticles with biological systems, enthusiasm for nanotechnology in biomedical applications has been developed in the past decades. Fe2O3 nanoparticles, as the most stable iron oxide, have special merits that make them useful widely for detecting diseases, therapy, drug delivery, and monitoring the therapeutic process. This review presents the fabrication methods of Fe2O3-based materials and their photocatalytic and magnetic properties. Then, we highlight the application of Fe2O3-based nanoparticles in diagnosis and imaging, different therapy methods, and finally, stimulus-responsive systems, such as pH-responsive, magnetic-responsive, redox-responsive, and enzyme-responsive, with an emphasis on cancer treatment. In addition, the potential of Fe2O3 to combine diagnosis and therapy within a single particle called theranostic agent will be discussed.

High-Throughput Aptamer Microarrays for Fluorescent Detection of Multiple Organophosphorus Pesticides in Food

A novel high-throughput aptamer microarray fluorescent method based on thioflavin T (ThT) was established for the sensitive detection of phoxim, parathion, fensulfothion, and isocarbophos. In this work, the aptamers in binding buffer tended to have the antiparallel G-quadruplex structure, which can bind ThT and release its potential fluorescence signal. However, when the organophosphorus pesticides (OPs) were present, partial aptamers preferred to bind them, forcing the displacement of ThT from the G-quadruplex and resulting in the significant decrease in fluorescence signal. Under optimal experimental conditions (12T spacer, 300 nM aptamer, and 80 μM ThT), the OP aptamer microarray has low limits of detection of 25.4 ng/mL for phoxim, 12.0 ng/mL for parathion, 7.7 ng/mL for fensulfothion, and 9.9 ng/mL for isocarbophos. The accuracy and reliability of the method is further verified by testing the recovery rate of OPs spiked in two different complicated sample matrices (pears and radishes). It is worth mentioning that not only the developed aptamer microarray technology has low sensitivity and a broad spectrum, but it also allows for high-throughput and rapid analysis of a variety OPs, which overcomes some of the shortcomings of other OP detection methods.

Cellulase-Linked Immunomagnetic Microbial Assay on Electrodes: Specific and Sensitive Detection of a Single Bacterial Cell

Pathogen-associated infections represent one of the major threats to human health and require reliable methods for immediate and robust identification of pathogenic microorganisms. Here, an inexpensive cellulase-linked immunomagnetic methodology was developed for the specific and ultrasensitive analysis of bacteria at their single-cell levels within a 3 h procedure. Detection of a model bacterium, Escherichia coli, was performed in a sandwich reaction with E. coli-specific either aptamer or antibody (Ab)-modified magnetic beads (MBs) and Ab/aptamer reporter molecules linked to cellulase. The cellulase-labeled immuno-aptamer sandwich applied onto nitrocellulose-film-modified electrodes digested the film and changed its electrical conductivity. Electrode's chronocoulometric responses at 0.3 V, in the absence of any redox indicators, allowed a single E. coli cell detection and from 1 to 4 × 10⁴ CFU mL^-1 E. coli quantification. No interference/cross-reactivity from Salmonella enteritidis, Enterobacter agglomerans, Pseudomonas putida, Staphylococcus aureus, and Bacillus subtilis was observed when the assay was performed on Ab-modified MBs, and E. coli could be quantified in tap water and milk. This electrochemically label-free methodology is sufficiently fast, highly specific, and sensitive to be used in direct in-field applications. The assay can be adapted for specific detection of other bacterial strains of either the same or different species and offers new analytical tools for fast, specific, and reliable analysis of bacteria in the clinic, food, and environment.

Reusable surface plasmon resonance biosensor chip for the detection of H1N1 influenza virus

We developed a reusable magnetic surface plasmon resonance (SPR) sensor chip for detecting various target molecules repeatedly in a conventional SPR system. Here, ferromagnetic patterns on a SPR sensor chip were utilized to trap a layer of magnetic particles, and they were utilized as a solid substrate for SPR sensing in a conventional SPR system. After a sensing experiment, the used magnetic particles were removed by external magnetic fields, and a new layer of magnetic particles was immobilized to the SPR sensor chip for additional sensing measurements. Since magnetic particles were trapped on the ferromagnetic patterns, we could use our reusable SPR chip for SPR sensing measurements in a traditional SPR system without any applied magnetic fields. Significantly, ferromagnetic patterns on the sensor chip surface deflected the strong external fields, so that the large aggregation of magnetic particles on the sensor surface was reduced. We demonstrated using a single reusable SPR sensor chip to measure the nucleoprotein (NP) of H1N1 influenza virus solution ranging repeatedly for more than 7 times without significant signal degradation. Also, different target molecules could be repeatedly measured in a single SPR chip. Since our reusable SPR sensor chip can be repeatedly used in a conventional SPR system without any chemical processes for refreshment, the cost for SPR sensing should be significantly reduced. In this case, our reusable SPR sensor chip can be a major breakthrough and can be used for versatile practical applications of SPR sensors.

Highly sensitive host-guest mode homogenous electrochemical thrombin signal amplification aptasensor based on tetraferrocene label

The development of sensitive and convenient detection methods to monitor thrombin without the use of enzymes or complex nanomaterials is highly desirable for the diagnosis of cardiovascular diseases. In this article, tetraferrocene was first synthesized and then a sensitive and homogeneous electrochemical aptasensor was developed for thrombin detection based on host-guest recognition between tetraferrocene and β-cyclodextrin (β-CD). In the absence of thrombin, the double stem-loop of thrombin aptamer (TBA) prevented tetraferrocenes labeled at both ends from entering the cavity of β-CD deposited on gold electrode surface. After binding with thrombin, the stem-loop structure of TBA opened and transformed into special G-quarter structure, forcing tetraferrocene into the cavity of β-CD. As a result, thrombin allowed eight ferrocene molecules to reach the gold electrode surface, greatly amplifying the response signal. The obtained aptasensors showed dynamic detection range from 4 pM to 12.5 nM with detection limit around 1.2 pM. Overall, the results indicate that the proposed aptasensors are promising for future rapid clinical detection of thrombin and development of signal amplification strategies for detection of various proteins.

Predicting Future Prospects of Aptamers in Field-Effect Transistor Biosensors

Aptamers, in sensing technology, are famous for their role as receptors in versatile applications due to their high specificity and selectivity to a wide range of targets including proteins, small molecules, oligonucleotides, metal ions, viruses, and cells. The outburst of field-effect transistors provides a label-free detection and ultra-sensitive technique with significantly improved results in terms of detection of substances. However, their combination in this field is challenged by several factors. Recent advances in the discovery of aptamers and studies of Field-Effect Transistor (FET) aptasensors overcome these limitations and potentially expand the dominance of aptamers in the biosensor market.

Recent Progress of Biomarker Detection Sensors

Early cancer diagnosis and treatment are crucial research fields of human health. One method that has proven efficient is biomarker detection which can provide real-time and accurate biological information for early diagnosis. This review presents several biomarker sensors based on electrochemistry, surface plasmon resonance (SPR), nanowires, other nanostructures, and, most recently, metamaterials which have also shown their mechanisms and prospects in application in recent years. Compared with previous reviews, electrochemistry-based biomarker sensors have been classified into three strategies according to their optimizing methods in this review. This makes it more convenient for researchers to find a specific fabrication method to improve the performance of their sensors. Besides that, as microfabrication technologies have improved and novel materials are explored, some novel biomarker sensors-such as nanowire-based and metamaterial-based biomarker sensors-have also been investigated and summarized in this review, which can exhibit ultrahigh resolution, sensitivity, and limit of detection (LoD) in a more complex detection environment. The purpose of this review is to understand the present by reviewing the past. Researchers can break through bottlenecks of existing biomarker sensors by reviewing previous works and finally meet the various complex detection needs for the early diagnosis of human cancer.

Green fluorescent carbon quantum dots functionalized with polyethyleneimine, and their application to aptamer-based determination of thrombin and ATP

Brightly fluorescent carbon quantum dots coated with polyethylenimine (PEI-CDs) were prepared using malic acid and PEI as the precursors. The PEI-CDs have a high quantum yield (41%) and green emission (peaking at 502 nm under 430 nm excitation), both of which are not affected by high ionic strength. The PEI-CDs have a positive charge at physiological pH values and can electrostatically bind aptamers with their negative charge. This is shown for aptamers binding thrombin or ATP. Binding of aptamers results in quenching of fluorescence. If thrombin or ATP are introduced, the respective aptamer will bind them, and the complex is then released from the PEI-CDs. Fluorescence increases in proportion to the analyte concentration. Under optimized conditions, thrombin and ATP can be sensitively and selectively detected by fluorometry with lower detection limits of 1.2 and 13 nM, respectively. The assay was successfully applied to the determination of thrombin and of ATP in spiked serum samples. Graphical abstract Green fluorescent carbon quantum dots were functionalized with polyethyleneimine. They were applied to aptamer-based determination of thrombin and ATP. The PEI-functionalized carbon quantum dots (PEI-CDs) have bright green fluorescence are were synthesized by one-step hydrothermal treatment of malic acid and PEI. Employing the PEI-CDs, a fluorometric aptamer-based assay was developed for the determination of thrombin and ATP.

Nanomaterial-based aptamer sensors for arsenic detection

Arsenic (As) is a highly toxic contaminant in the environment and a serious carcinogen for the human being. The toxicity of arsenic significantly threatens environmental and human health. The effective removing technology for arsenic remains challenging, and one of the reasons is due to the lack of powerful detection method in the complex environmental matrix. There is thus an urgent need to develop novel analytical methods for arsenic, preferably with the potential for the field-testing. To combat arsenic pollution and maintain a healthy environment and eco-system, many analytical methods have been developed for arsenic detection in various samples. Among these strategies, biosensors hold great promise for rapid detection of arsenic, in particular, nanomaterials-based aptamer sensors have attracted significant attention due to their simplicity, high sensitivity and rapidness. In this paper, we reviewed the recent development and applications of aptamer sensors (aptasensors) based-on nanomaterial for arsenic detection, in particular with emphasis on the works using optical and electrochemical technologies. We also discussed the recent novel technology in aptasensors development for arsenic detection, including nucleic acid amplification for signal enhancement and device integration for the portability of arsenic sensors. We are hoping this review could inspire further researches in developing novel nanotechnologies based aptasensors for possible on-site detection of arsenic.

Compact Grating-Coupled Biosensor for the Analysis of Thrombin

A compact optical biosensor for direct detection of thrombin in human blood plasma (HBP) is reported. This biosensor platform is based on wavelength spectroscopy of diffraction-coupled surface plasmons on a chip with a periodically corrugated gold film that carries an antifouling thin polymer layer consisting of poly[(N-(2-hydroxypropyl)methacrylamide)-co-(carboxybetaine methacrylamide)] (poly(HPMA-co-CBMAA)) brushes. This surface architecture provides superior resistance to nonspecific and irreversible adsorption of abundant compounds in the analyzed HBP samples in comparison to standard surface modifications. The carboxylate groups along the polymer brushes were exploited for the covalent immobilization of aptamer ligands. These ligands were selected to specifically capture the target thrombin analyte from the analyzed HBP sample in a way that does not activate the coagulatory process at the biosensor surface with poly(HPMA-co-CBMAA) brushes. Direct label-free analysis of thrombin in the medically relevant concentration range (1-20 nM) is demonstrated without the need for diluting the HBP samples or using additional steps for signal enhancement. The reported platform constitutes the first step toward a portable and sensitive point-of-care device for direct detection of thrombin in human blood.

Characterization of troponin T binding aptamers for an innovative enzyme-linked oligonucleotide assay (ELONA)

Early diagnosis of acute myocardial infarction (AMI) is of outmost importance to reduce the mortality rate, and cardiac troponins are considered the gold standard biomarkers of myocardial necrosis. In this scenario, the characterization of two troponin T (TnT)-binding aptamers as viable alternative to antibodies employed on clinical immunoassays is here reported for the first time. Their recognition ability was first investigated through surface plasmon resonance (SPR). Subsequently, an enzyme-linked oligonucleotide assay (ELONA) was developed on common 96-well polystyrene plates, both by direct and sandwich detection strategies for comparison. In both cases, the assay exhibits a detection ability of TnT in the range of low nanomolar but a great advantage on serum interference was obtained by using both aptamers in a sandwich format, with excellent reproducibility and recovery values. Despite the sensitivity needing to be enhanced to the low picomolar range, these results are encouraging for the development of new, low-cost, and rapid antibody-free colorimetric assays for AMI studies based on aptamer-Troponin T recognition.

Recent Advances on Electrochemical Biosensing Strategies toward Universal Point-of-Care Systems

A number of very recently developed electrochemical biosensing strategies are promoting electrochemical biosensing systems into practical point-of-care applications. The focus of research endeavors has transferred from detection of a specific analyte to the development of general biosensing strategies that can be applied for a single category of analytes, such as nucleic acids, proteins, and cells. In this Minireview, recent cutting-edge research on electrochemical biosensing strategies are described. These developments resolved critical challenges regarding the application of electrochemical biosensors to practical point-of-care systems, such as rapid readout, simple biosensor fabrication method, ultra-high detection sensitivity, direct analysis in a complex biological matrix, and multiplexed target analysis. This Minireview provides general guidelines both for scientists in the biosensing research community and for the biosensor industry on development of point-of-care system, benefiting global healthcare.

Femtomolar electroanalysis of a breast cancer biomarker HER-2/neu protein in human serum by the cellulase-linked sandwich assay on magnetic beads

In cancer diagnostics, specific analysis of blood-circulating proteins biomarkers of cancer is often complicated both by their inherently low concentrations and by strong interference from serum/blood proteins. Here, we report a simple and robust electrochemical cellulase-linked sandwich assay on magnetic beads (MBs) for fM-sensitive analysis of the Human Epidermal growth factor Receptor-2 HER-2/neu protein that is over-expressed in most aggressive breast cancers. In the assay, a sandwich is assembled by capturing HER-2/neu on either antibody (Ab) or aptamer-modified MBs accompanied by reaction with the second Ab or aptamer labelled with cellulase. On application of the sandwiches assembled on MBs onto a cost-effective graphite electrode modified with an insulating nitrocellulose film, the cellulase label digests the film. This results in the pronounced changes in the electrical properties of the modified electrodes. The chronocoulometrically-measured extent of the produced changes was proportional to the 10^-15-10^-10 M HER-2/neu in the analyzed samples, and down to 1 fM of HER-2/neu could be detected in human serum samples in an overall less than 3 h assay. The developed simple and electrochemically label-free methodology is general and can be easily adapted for testing of any other protein.

Aptamer-Based Sandwich Assay for Measurement of Thymidine Kinase 1 in Serum of Cancerous Patients

Thymidine kinase 1 (TK1) is traditionally a serum biomarker that is elevated in the early stages of malignancies. The diagnostic and prognostic role of TK1 for screening and monitoring human malignancies has recently been investigated. Anti-human TK1 aptamers were selected through 12 iterative rounds of systematic evolution of ligands by exponential enrichment from a DNA library. The aptamer pool of round 12 was amplified, and the polymerase chain reaction product was cloned on the TA vector. Of the 85 colonies obtained, 52 were identified as positive clones. These aptamers were screened for TK1 with surface plasmon resonance, where apta37 and apta69 showed the highest affinity for TK1. The TK1_apta37 and TK1_apta69 aptamers were used in a sandwich assay platform and successfully detected TK1 in the concentration range of 54-3500 pg mL^-1. Clinical samples from 60 cancerous patients were also tested with this assay system and compared using the conventional antibody-based enzyme-linked immunosorbent assay kit. The aptamer sandwich assay demonstrated a dynamic range for TK1 at clinically relevant serum levels, covering subpicogram per milliliter concentrations. The new approach offers a simple and robust method for detecting serum biomarkers that have low and moderate abundance. The results of this study demonstrate the screening capability of the aptamer sandwich assay platform and its potential applicability to the point-of-care testing system.

Comparison of turn-on and ratiometric fluorescent G-quadruplex aptasensor approaches for the detection of ATP

Two fluorescent aptasensor methods were developed for the detection of ATP in biochemical systems. The first method consisted of a label-free fluorescent "turn-on" approach using a guanine-rich ATP aptamer sequence and the DNA-binding agent berberine complex. In the presence of ATP, the ATP preferentially binds with its aptamer and conformationally changes into a G-quadruplex structure. The association of berberine with the G-quadruplex results in the enhancement of the fluorescence signal of the former. The detection limit of ATP was found to be 3.5 μM. Fluorescence, circular dichroism and melting temperature (T_m) experiments were carried out to confirm the binding specificity and structural changes. The second method employs the ratiometric fluorescent approach based on the Forster resonance energy transfer (FRET) for the detection of ATP using berberine along with a quencher (AuNRs, AgNPs) and a fluorophore (red quantum dots (RQDs), carbon dots (CDs)) labeled at 5' and 3' termini of the ATP-binding aptamer sequence. Upon addition of ATP and berberine, ATP specifically binds with its aptamer leading to the formation of G-quadruplex, and similarly, berberine also binds to the G-quadruplex. This leads to an enhancement of fluorescence of berberine while that of RQD and CDs were significantly quenched via FRET. The respective detection limits calculated were 3.6 μM and 3.8 μM, indicating these fluorescent aptasensor methods may be used for a wide variety of small molecules. Graphical abstract.

A new electrochemical aptasensor for sensitive assay of a protein based on the dual-signaling electrochemical ratiometric method and DNA walker strategy

Herein, a new electrochemical aptamer-based biosensor for highly sensitive assay of thrombin has been developed based on the dual-signaling electrochemical ratiometric method and the DNA walker strategy, and shows a low detection limit of about 56 fM.

Trypsin enhances aptamer screening: A novel method for targeting proteins

A novel screening method for protein aptamer selection was developed in this study. Aptamers with high affinity and specificity to the surface recombinant antigen of Helicobacter pylori (HP-Ag) and to tumor markers carcinoembryonic antigen (CEA), cancer antigen 125 (CA125) and cancer antigen 19-9(CA19-9) were screened using trypsin enhanced screening method. Briefly, the target proteins above were immobilized onto 96-well polystyrene plates and incubated with a single-stranded DNA (ssDNA) library for aptamer selection. Then, trypsin was introduced to digest the proteins and obtain ssDNA that bound to the target proteins with high specificity. The concentration of ssDNA that shed from protein-ssDNA complexes was detected. After sequencing, the enrichment of target-specific aptamers was monitored and the affinity of each aptamer was analyzed. Urea, which has been reported in other article, was used to compare with trypsin. The results revealed that trypsin was more effective than urea for protein aptamer selection. The protocol used in this study provided a novel method for generating aptamers.

Label-free aptasensors based on fluorescent screening assays for the detection of Salmonella typhimurium

We report two label-free fluorescent aptasensor methods for the detection of S. typhimurium. In the first method, we have used a ''turn off'' approach in which the aptamer is first intercalated with SYBR Green I (SG), leading to a greatly enhanced fluorescence signal. The addition of S. typhimurium (approximately 1530-96938 CFU/mL), which specifically binds with its aptamer and releases SG, leads to a linear decrease in fluorescence intensity. The lowest detection limit achieved with this approach was in the range of 733 CFU/mL. In the second method, a ''turn on'' approach was designed for S. typhimurium through the Förster resonance energy transfer (FRET) between Rhodamine B (RB) and gold nanoparticles (AuNPs). When the aptamer and AuNPs were mixed with RB, the fluorescence of RB was significantly quenched via FRET. The aptamer adsorbs to the AuNP surface to protect them from salt-induced aggregation, which leads to the fluorescence quenching of RB in presence of AuNPs. Upon the addition of S. typhimurium, S. typhimurium specifically binds with its aptamer and loses the capability to stabilize AuNPs. Thus, the salt easily induces the aggregation of AuNPs, resulting in the fluorescence recovery of the quenched RB. S. typhimurium concentrations ranging from 1530 to 96938 CFU/mL with the detection limit of 464 CFU/mL was achieved with this methodology. Given these data, some insights into the molecular interactions between the aptamer and the bacterial target are provided. These aptasensor methods also may be adapted for the detection of a wide variety of targets.

Magnetic force assisted electrochemical sensor for the detection of thrombin with aptamer-antibody sandwich formation

A magnetic force assisted electrochemical aptamer-antibody sandwich assay (MESA) was developed for the detection of thrombin as a model protein in serum samples. The MESA using the formation of sandwich complexes on the electrochemical sensor probe for reaction and the removal of unbound bioconjugates from the sensor surface without washing are controlled by a magnetic field. Thrombin was determined by the cathodic currents of a toluidine blue O (TBO) attached with thrombin antibody modified magnetic nanoparticle (MNP) at the sensor surface. To detect thrombin in a serum sample, we applied a thrombin-specific aptamer as the capture molecule bound to the functionalized conducting polymer layer (poly-(2,2´:5´,5″-terthiophene-3´-p-benzoic acid) (pTBA)), and streptavidin and starch coated-MNP was conjugated with biotinylated thrombin antibodies (Ab) and TBO as the bioconjugate (MNP@Ab-TBO). The characterization of MNP@Ab-TBO and sensor probe was performed using voltammetry, impedance spectroscopy, XPS, and UV-VIS spectroscopy. The experimental conditions were optimized in terms of pH, binding time, removal time of unbound bioconjugates, and applied potential. The dynamic ranges of thrombin were from 1.0 to 500 nM with detection limit of 0.49 ( ± 0.06) nM. The recovery test demonstrates the reliability of the proposed sensing system for a handheld device.

Aptamer-Modified Magnetic Beads in Biosensing

Magnetic beads (MBs) are versatile tools for the purification, detection, and quantitative analysis of analytes from complex matrices. The superparamagnetic property of magnetic beads qualifies them for various analytical applications. To provide specificity, MBs can be decorated with ligands like aptamers, antibodies and peptides. In this context, aptamers are emerging as particular promising ligands due to a number of advantages. Most importantly, the chemical synthesis of aptamers enables straightforward and controlled chemical modification with linker molecules and dyes. Moreover, aptamers facilitate novel sensing strategies based on their oligonucleotide nature that cannot be realized with conventional peptide-based ligands. Due to these benefits, the combination of aptamers and MBs was already used in various analytical applications which are summarized in this article.

A comprehensive review on nano-molybdenum disulfide/DNA interfaces as emerging biosensing platforms

The development of nucleic acid-based portable platforms for the real-time analysis of diseases has attracted considerable scientific and commercial interest. Recently, 2D layered molybdenum sulfide (2D MoS₂ from here on) nanosheets have shown great potential for the development of next-generation platforms for efficient signal transduction. Through combination with DNA as a biorecognition medium, MoS₂ nanostructures have opened new opportunities to design and construct highly sensitive, specific, and commercially viable sensing devices. The use of specific short ssDNA sequences like aptamers has been proven to bind well with the unique transduction properties of 2D MoS₂ nanosheets to realize aptasensing devices. Such sensors can be operated on the principles of fluorescence, electro-cheumuluminescence, and electrochemistry with many advantageous features (e.g., robust biointerfacing through various conjugation chemistries, facile sensor assembly, high stability with regard to temperature/pH, and high affinity to target). This review encompasses the state of the art information on various design tactics and working principles of MoS₂/DNA sensor technology which is emerging as one of the most sought-after and valuable fields with the advent of nucleic acid inspired devices. To help achieve a new milestone in biosensing applications, great potential of this emerging technique is described further with regard to sensitivity, specificity, operational convenience, and versatility.

Detection of Thrombin Based on Fluorescence Energy Transfer between Semiconducting Polymer Dots and BHQ-Labelled Aptamers

Carboxyl-functionalized semiconducting polymer dots (Pdots) were synthesized as an energy donor by the nanoprecipitation method. A black hole quenching dye (BHQ-labelled thrombin aptamers) was used as the energy acceptor, and fluorescence resonance energy transfer between the aptamers and Pdots was used for fluorescence quenching of the Pdots. The addition of thrombin restored the fluorescence intensity. Under the optimized experimental conditions, the fluorescence of the system was restored to the maximum when the concentration of thrombin reached 130 nM, with a linear range of 0-50 nM (R² = 0.990) and a detection limit of 0.33 nM. This sensor was less disturbed by impurities, showing good specificity and signal response to thrombin, with good application in actual samples. The detection of human serum showed good linearity in the range of 0-30 nM (R² = 0.997), with a detection limit of 0.56 nM and a recovery rate of 96.2-104.1%, indicating that this fluorescence sensor can be used for the detection of thrombin content in human serum.

Binding-responsive catalysis of Taq DNA polymerase for the sensitive and selective detection of cell-surface proteins

Here we develop a new method for the sensitive and selective detection of cell-surface proteins with an aptamer probe designed for binding-responsive catalysis of Taq DNA polymerase. Taking the biotin receptor as a model, the method allows the detection of target protein on surfaces of different types of cancer cells.

Molecular mechanisms for delicately tuning the morphology and properties of Fe3O4 nanoparticle clusters

After being oxidized, dihydric alcohols drive the formation of monodisperse Fe₃O₄ particle clusters.