Integrated Label-Free Protein Detection and Separation in Real Time Using Confined Surface Plasmon Resonance Imaging

Dielectric Surface-Based Biosensors for Enhanced Detection of Biomolecular Interactions: Advances and Applications

Surface plasmon resonance (SPR) biosensors are extensively utilized for analyzing molecular interactions due to their high sensitivity and label-free detection capabilities. Recent innovations in surface-sensitive biosensors with dielectric surfaces address the inherent limitations associated with traditional gold surfaces, such as thermal effects and biocompatibility issues, which can impede broader applications. This review examines state-of-the-art biosensor configurations, including total internal reflection, optical waveguide, photonic crystal resonators, Bloch surface wave biosensors, and surface electrochemical biosensors, which can enhance analyte signals and augment the molecular detection efficiency at the sensor interface. These technological advancements not only improve the resolution of binding kinetics analysis and single-molecule detection but also extend the analytical capabilities of these systems. Additionally, this review explores prospective advancements in augmenting field enhancement and incorporating multimodal sensing functionalities, emphasizing the significant potential of these sophisticated biosensing technologies to profoundly enhance our understanding of molecular interactions.

Emergent Biosensing Technologies Based on Fluorescence Spectroscopy and Surface Plasmon Resonance

The purpose of this work is to provide an exhaustive overview of the emerging biosensor technologies for the detection of analytes of interest for food, environment, security, and health. Over the years, biosensors have acquired increasing importance in a wide range of applications due to synergistic studies of various scientific disciplines, determining their great commercial potential and revealing how nanotechnology and biotechnology can be strictly connected. In the present scenario, biosensors have increased their detection limit and sensitivity unthinkable until a few years ago. The most widely used biosensors are optical-based devices such as surface plasmon resonance (SPR)-based biosensors and fluorescence-based biosensors. Here, we will review them by highlighting how the progress in their design and development could impact our daily life.

A Diagnostic Device for In-Situ Detection of Swine Viral Diseases: The SWINOSTICS Project

In this paper, we present the concept of a novel diagnostic device for on-site analyses, based on the use of advanced bio-sensing and photonics technologies to tackle emerging and endemic viruses causing swine epidemics and significant economic damage in farms. The device is currently under development in the framework of the EU Commission co-funded project. The overall concept behind the project is to develop a method for an early and fast on field detection of selected swine viruses by non-specialized personnel. The technology is able to detect pathogens in different types of biological samples, such as oral fluids, faeces, blood or nasal swabs. The device will allow for an immediate on-site threat assessment. In this work, we present the overall concept of the device, its architecture with the technical requirements, and all the used innovative technologies that contribute to the advancements of the current state of the art.

Recent Advances in Microscale Western Blotting

Western blotting is a ubiquitous tool used extensively in the clinical and research settings to identify proteins and characterize their levels. It has rapidly become a mainstay in research laboratories due to its specificity, low cost, and ease of use. The specificity arises from the orthogonal processes used to identify proteins. Samples are first separated based on size and then probed with antibodies specific for the protein of interest. This confirmatory approach helps avoid pitfalls associated with antibody cross-reactivity and specificity issues. While the technique has evolved since its inception, the last decade has witnessed a paradigm shift in Western blotting technology. The introduction of capillary and microfluidic platforms has significantly decreased time and sample requirements while enabling high-throughput capabilities. These advances have enabled Western analysis down to the single cell level in highly parallel formats, opening vast new opportunities for studying cellular heterogeneity. Recent innovations in microscale Western blotting are surveyed, and the potential for enhancing detection using advances in label-free biosensing is briefly discussed.

Cancer-Cells on Chip for Label-Free Detection of Secreted Molecules

In the present report, we are making the proof of concept of cell small populations (from 1 to 100 cells) spotting, culture and secretion detection on a gold surface. In order to keep the cells in a hydrated environment during the robotized micropipetting and to address different cell lines on a single chip, a biocompatible alginate polymer was used. This approach enables the encapsulation of the cell in a very small volume (30 nL), directly on the substrate and permits a precise control of the number of cells in each alginate bead. After 24 h of culture, the adherent cells are ready for surface plasmon resonance imaging (SPRi) experimentation. To enable the detection of secreted proteins, various antibodies are immobilized in an organized manner on a SPRi sensor and permitted the multiplex detection of different proteins secreted by the different cultured cell lines. Evidence of the real-time detection will be presented for Prostate Specific Antigen (PSA) and β-2-microglobulin (B2M) secreted by prostate cancer cells following induction by dihydrotestosterone (DHT). Different kinetics for the two secreted proteins were then demonstrated and precisely determined using the chip.

Development of a HIV-1 Virus Detection System Based on Nanotechnology

Development of a sensitive and selective detection system for pathogenic viral agents is essential for medical healthcare from diagnostics to therapeutics. However, conventional detection systems are time consuming, resource-intensive and tedious to perform. Hence, the demand for sensitive and selective detection system for virus are highly increasing. To attain this aim, different aspects and techniques have been applied to develop virus sensor with improved sensitivity and selectivity. Here, among those aspects and techniques, this article reviews HIV virus particle detection systems incorporated with nanotechnology to enhance the sensitivity. This review mainly focused on four different detection system including vertically configured electrical detection based on scanning tunneling microscopy (STM), electrochemical detection based on direct electron transfer in virus, optical detection system based on localized surface plasmon resonance (LSPR) and surface enhanced Raman spectroscopy (SERS) using plasmonic nanoparticle.

Detection of charges and molecules with self-assembled nano-oscillators

Detection of a single or small amount of charges and molecules in biologically relevant aqueous solutions is a long-standing goal in analytical science and detection technology. Here we report on self-assembled nano-oscillators for charge and molecular binding detections in aqueous solutions. Each nano-oscillator consists of a nanoparticle linked to a solid surface via a molecular tether. By applying an oscillating electric field normal to the surface, the nanoparticles oscillate, which is detected individually with ∼0.1 nm accuracy by a plasmonic imaging technique. From the oscillation amplitude and phase, the charge of the nanoparticles is determined with a detection limit of ∼0.18 electron charges along with the charge polarity. We further demonstrate the detection of molecular binding with the self-assembled nano-oscillators.

Plasmonic films based on colloidal lithography

This paper reviews recent advances in the field of plasmonic films fabricated by colloidal lithography. Compared with conventional lithography techniques such as electron beam lithography and focused ion beam lithography, the unconventional colloidal lithography technique with advantages of low-cost and high-throughput has made the fabrication process more efficient, and moreover brought out novel films that show remarkable surface plasmon features. These plasmonic films include those with nanohole arrays, nanovoid arrays and nanoshell arrays with precisely controlled shapes, sizes, and spacing. Based on these novel nanostructures, optical and sensing performances can be greatly enhanced. The introduction of colloidal lithography provides not only efficient fabrication processes but also plasmonic films with unique nanostructures, which are difficult to be fabricated by conventional lithography techniques.

Extended-nanofluidics: fundamental technologies, unique liquid properties, and application in chemical and bio analysis methods and devices

Engineering using liquids confined in channels 10-1000 nm in dimension, or "extended-nanofluidics," is the next target of microfluidic science. Liquid properties at this scale were unrevealed until recently because of the lack of fundamental technologies for investigating these ultrasmall spaces. In this article, the fundamental technologies are reviewed, and the emerging science and technology in the extended-nanospace are discussed.

Femtoliter-scale separation and sensitive detection of nonfluorescent samples in an extended-nano fluidic device

Liquid chromatography using a nanofluidic chip and DIC-TLM realized separation and detection of a 21 fL, 0.61 zmol nonfluorescent sample.

Fabrication and characterization of flexible and tunable plasmonic nanostructures

We present a novel method to fabricate flexible and tunable plasmonic nanostructures based on combination of soft lithography and nanosphere lithography, and perform a comprehensive structural and optical characterization of these structures. Spherical latex particles are uniformly deposited on glass slides and used as molds for polydimethylsiloxane to obtain nanovoid structures. The diameter and depth of the nanostructures are controlled by the size of the latex particles. These surfaces are coated with a thin Ag layer for fabrication of uniform plasmonic nanostructures. Structural characterization of these surfaces is performed by SEM and AFM. Optical properties of these plasmonic nanostructures are evaluated via UV/Vis absorption spectroscopy, dark field microscopy, and surface–enhanced Raman spectroscopy (SERS). Position of the surface plasmon absorption depends on the diameter and depth of the nanostructures. SERS enhancement factor (measured up to 1.4 × 10⁶) is dependent on the plasmon absorption wavelength and laser wavelength used in these experiments.

Novel amperometric aptasensor based on analyte-induced suppression of enzyme catalysis in polymeric bionanocomposites

We report on a novel label-free biosensing interface based on multifunctional polymeric bionanocomposites (PBNCs) and its application for sensitive detection of protein based on the analyte-induced suppression of enzymatic catalysis in PBNCs. Thrombin and its aptamer are adopted as a model system to construct an amperometric aptasensor. First, polydopamine-based PBNCs with glucose oxidase (GOx) entrapped at high load/activity and Au nanoparticles (AuNPs) dispersed in high abundance on the surface were prepared through a chemical/biochemical synthesis method, as proven by UV-vis spectrophotometry, digital imaging, and transmission electron microscopy. Then, the PBNCs were cast-coated onto an Au electrode. The PBNC-modified Au electrode presented a high chronoamperometric sensitivity of 113 ± 2 μA cm(-2) mM(-1) to glucose, as well as a high capability of immobilizing the aptamer through the surficial AuNPs to fabricate a label-free aptasensing interface. The binding of thrombin to the aptasensor surface significantly hindered the mass-transfer of the enzymatic substrates/products and thus suppressed the enzymatic catalysis efficiency, which produced obvious signal change through measuring the electrooxidation of enzymatically generated H(2)O(2). The thus-prepared aptasensor could detect thrombin with a broad detection range (1-100 nM), a detection limit down to 0.1 nM, and satisfactory specificity. The developed aptasensing method may find broad applications in the fields of clinical diagnosis, environmental protection, and food safety.

Real-time monitoring biomarker expression of carcinoma cells by surface plasmon resonance biosensors

A novel surface plasmon resonance (SPR) biosensor which is capable of monitoring proteomic biomarker secretion from living cells is reported here. Vascular endothelial growth factor (VEGF) secretion from living SKOV-3 ovarian cancer cells was measured for concept demonstration.

Facile fabrication of an interface for online coupling of microchip CE to surface plasmon resonance

Background: The aim was to develop a simple route to coupling microchip CE (MCE) to surface plasmon resonance (SPR). MCE is a microfluidic technology that utilizes microfabrication techniques to connect interacting fluid reservoirs. Its advantages include rapid analysis (typically seconds), easy integration of multiple analytical steps and parallel operation. SPR detects changes in refractive index within a short distance from the surface of a thin metal film as variations in light intensity reflected from the back of the film and, thus, does not require labeling. There is a great demand for developing hyphenated techniques like MCE–SPR that are fast, sensitive and inexpensive to analyze biological materials. Materials & Methods: The separation channel and flow cell exist as overlapping regions constructed during the microchip production and buffer solution was delivered mechanically. Such a design has successfully isolated the electrical field inherent in the MCE from the SPR detector. Consequently, the potential interference to the SPR signal (or modulation of the density of surface plasmons at the gold chip) is circumvented. Results: The limits of detection for bovine serum albumin and sodium fluorescein were determined to be 7.5 µM and 3.1 mM, respectively. Conclusion: The technique described, herein, has been successfully applied in the separation of two species. The method offers the advantages of a near zero connection dead volume, electrical shielding from the separation voltage and minimization of the mass transfer effect.

Surface Plasmon Resonance imaging-based sensing for anti-bovine immunoglobulins detection in human milk and serum

Only few papers deal with Surface Plasmon Resonance imaging (SPRi) direct detection on complex matrices, limiting the biosensor application to real analytical problems. In this work a SPRi biosensor for anti-bovine IgG detection in untreated human bodily fluids, i.e. diluted human serum and milk, was developed. Enhanced levels of cow's milk antibodies in children's serum are suspected for their possible correlation with Type 1 diabetes during childhood and their detection in real samples was up to now performed by classical immunoassays based on indirect detection. The biosensor was optimised in standard samples and then in untreated human milk for anti-bovine IgG direct detection. The key novelty of the work is the evaluation of matrix effect by applying to real samples an experimental and ex ante method previously developed for SPRi signal sampling in standard solutions, called "Data Analyzer"; it punctually visualises and analyses the behaviour of receptor spots of the array, to select only spot areas with the best specific vs. unspecific signal values. In this way, benefits provide by SPRi image analysis are exploited here to quantify and minimise drawbacks due to the matrix effect, allowing to by-pass every matrix pre-treatment except dilution.

Thiolene-based microfluidic flow cells for surface plasmon resonance imaging

Thiolene-based microfluidic devices have been coupled with surface plasmon resonance imaging (SPRI) to provide an integrated platform to study interfacial interactions in both aqueous and organic solutions. In this work, we develop a photolithographic method that interfaces commercially available thiolene resin to gold and glass substrates to generate microfluidic channels with excellent adhesion that leave the underlying sensor surface free from contamination and readily available for surface modification through self-assembly. These devices can sustain high flow rates and have excellent solvent compatibility even with several organic solvents. To demonstrate the versatility of these devices, we have conducted nanomolar detection of streptavidin-biotin interactions using in situ SPRI.

Surface plasmon resonance imaging (SPRi)-based sensing: a new approach in signal sampling and management

Surface plasmon resonance imaging (SPRi) is at the forefront of optical sensing, allowing real-time and label free simultaneous multi-analyte measurements. It represents an interesting technology for studying a broad variety of affinity interactions with impact in chemistry, both in fundamental and applied research. Signal sampling and management is a key step in SPRi measurements to achieve successful performances. This work aims to develop a strategy for selecting the sensing areas, called Regions of Interest (ROIs), to be sampled for recording SPRi signals that could results in improved sensor performances. The approach has been evaluated using antigen-antibody interaction: anti-human IgGs are immobilized on the chip surface in an array format, while the specific ligand (hIgG antigen) is in solution. This approach has general applicability and demonstrates that rational selection of sensitive areas and standard management of SPRi data has dramatic impact on sensor behaviour. The criteria of the method are: (a) creation of high density maps of ROIs, (b) evaluation of the SPRi binding signals on all the ROIs during a pre-analysis step, (c) 3D elaboration of the results, and (d) ranking of the ROIs for their final selection in further biosensor analysis. Using standard solution of antigen, three different ROIs selection approaches have been compared for their analytical performances. The proposed innovative method results to be the best one for SPRi-based sensing applications.

Nano/Microfluidics for diagnosis of infectious diseases in developing countries

Nano/Microfluidic technologies are emerging as powerful enabling tools for diagnosis and monitoring of infectious diseases in both developed and developing countries. Miniaturized nano/microfluidic platforms that precisely manipulate small fluid volumes can be used to enable medical diagnosis in a more rapid and accurate manner. In particular, these nano/microfluidic diagnostic technologies are potentially applicable to global health applications, since they are disposable, inexpensive, portable, and easy-to-use for detection of infectious diseases. In this paper, we review recent advances in nano/microfluidic technologies for clinical point-of-care applications at resource-limited settings in developing countries.

Selective Detection of Sulfur Derivatives Using Microfabricated Tuning Fork-Based Sensors

The paper describes an integtrated sensor system that can selectively and reversibly detect sulfur derivatives in the presence of interferent molecules. This is accomplished by integrating analyte-specific sensing materials with optimized filter materials. Microfabricated quartz tuning fork arrays are used to provide fast, accurate and low-cost transduction of the analyte binding events into electronic signals. The concept is demonstrated for detection of three sulfur derivatives - dimethyl disulfide, ethanethiol and methylsulfide.

Postcolumn renewal of sensor surfaces for high-performance liquid chromatography-surface plasmon resonance detection

The combination of high-performance liquid chromatography (HPLC) with surface plasmon resonance (SPR) for continuous separation and label-free detection of protein samples is described. The detection was realized by electrostatic adsorption of proteins bearing positive and negative charges onto chemically modified SPR sensors in two separate SPR channels. One SPR channel is coated with carboxymethylated dextran which facilitates the detection of positively charged proteins, whereas the other, devoted to the monitoring of negatively charged proteins, is covered with ethylenediamine molecules attached onto a dextran surface. Renewal of the sensor surface in the channels can be accomplished by introducing regeneration solutions through two six-port valves. The coupled technique (HPLC-SPR) was assessed for its analytical figures of merit and applied to the quantification of lysozyme in human milk samples. Unlike the SPR detection of bulk solution refractive index changes during chromatographic peak elutions, the highest sensitivity of SPR is retained in this work since the measurement is performed at the SPR sensor surface where the evanescent field is the strongest. The renewable SPR detection of continuous separations is reproducible and versatile and does not require the separated proteins to contain chromophores or to be prelabeled with a tag (e.g., a redox-active or fluorescent molecule). Such generality makes SPR complementary to other types of chromatographic detectors.

Fully integrated microfluidic separations systems for biochemical analysis

Over the past decade a tremendous amount of research has been performed using microfluidic analytical devices to detect over 200 different chemical species. Most of this work has involved substantial integration of fluid manipulation components such as separation channels, valves, and filters. This level of integration has enabled complex sample processing on miniscule sample volumes. Such devices have also demonstrated high throughput, sensitivity, and separation performance. Although the miniaturization of fluidics has been highly valuable, these devices typically rely on conventional ancillary equipment such as power supplies, detection systems, and pumps for operation. This auxiliary equipment prevents the full realization of a "lab-on-a-chip" device with complete portability, autonomous operation, and low cost. Integration and/or miniaturization of ancillary components would dramatically increase the capability and impact of microfluidic separations systems. This review describes recent efforts to incorporate auxiliary equipment either as miniaturized plug-in modules or directly fabricated into the microfluidic device.