Highly Selective Electrochemical Strategy for Monitoring of Cerebral Cu2+ Based on a Carbon Dot-TPEA Hybridized Surface

Mindful Eating: A Deep Insight Into Fructose Metabolism and Its Effects on Appetite Regulation and Brain Function

Fructose, a common sweetener in modern diets, has profound effects on both metabolism and brain function, primarily due to its distinct metabolic pathways. Unlike glucose, fructose bypasses critical regulatory steps in metabolism, particularly the phosphofructokinase-1 (PFK-1) feedback inhibition, leading to uncontrolled metabolism and increased fat storage. This review delves into the metabolic consequences of fructose consumption, including its limited role in directly stimulating insulin secretion, which affects satiety signaling and contributes to increased food intake. The small intestine initially helps metabolize ingested fructose, shielding the liver and brain from excessive exposure. However, when consumed in excess, particularly in diets high in processed foods, this protective mechanism becomes overwhelmed, contributing to metabolic disorders such as insulin resistance, obesity, and fatty liver disease. The review also explores fructose's impact on the brain, with a focus on the hippocampus, a key region for memory and learning. Chronic high fructose intake has been linked to mitochondrial dysfunction, increased production of reactive oxygen species (ROS), and neuroinflammation, all of which contribute to cognitive decline and impairments in memory and learning. Additionally, fructose-induced alterations in insulin signaling in the brain are associated with increased risk for neurodegenerative diseases. These findings underscore the potential long-term neurological consequences of excessive fructose intake and highlight the need for further human studies to assess the full spectrum of its effects on brain health. Addressing the rising consumption of fructose, particularly in processed foods, is essential for developing targeted strategies to mitigate its adverse metabolic and cognitive outcomes.

Fluorescence and colorimetric dual-mode sensing of copper ions and fingerprint visualization by benzimidazole derivatives

In this paper, the molecular fluorescence probe H containing an imidazole structure was designed and synthesized by forming a ring between two amino groups and one aldehyde group. The synthesized probe H exhibits a Stokes shift of 144 nm with fluorescence emission at 555 nm and excitation at 411 nm. The fluorescence of probe H was quenched by the addition of Cu2+ and accompanied a red-shift of ultraviolet-visible (UV-Vis) absorption spectrum. Probe H reveals good selectivity and high sensitivity to Cu2+ in the fluorescence and UV-Vis absorption spectrum. And the limit of detection (LOD) for Cu2+ by fluorescence and UV-Vis spectrum methods were 0.14 nmol L-1 and 1.34 μmol L-1, respectively. The binding ratio of probe H and Cu2+ is 1:1 according to the Job's plot equation. High resolution mass spectrometry (HRMS) and density function theory (DFT) calculations proved that the solvent acetonitrile and anionic chloride ion participated in the formation of H-Cu2+ complex. Furthermore, the established fluorescence analytical method was successfully applied for the detection of Cu2+ and spiked recovery experiments in tap water and mineral water. In addition, the probe exhibited outstanding solid-state fluorescence because of its excellently planar structure, and displayed a secondary fingerprint structure in the application of fingerprint detection.

Per- and poly-fluoroalkyl substances (PFAS) sensing: A focus on representatively sampling soil vadose zones linked to nano-sensors

Per- and poly-fluoroalkyl substances (PFAS) are a group of organo-fluorine compounds that have been broadly used in consumer and industrial products spanning virtually all sectors. They can be found as surfactants, coatings and liners, polymer additives, fire retardants, adhesives, and many more. The chemical stability of the carbon fluorine bond and amphiphilic nature of PFAS result in their persistence and mobility in the environment via soil porewater, surface water and groundwater, with potential for adverse effects on the environment and human health. There is an emergent and increasing requirement for fast, low-cost, robust, and portable methods to detect PFAS, especially in the field. There may be thousands of PFAS compounds present in soil and water at extremely low concentration (0.01-250 ppb) that require measurement, and traditional technologies for continuous environmental sensing are challenged due to the complexity of soil chemistry. This paper presents a comprehensive review of potentially rapid PFAS measurement methods, focused on techniques for representative sampling of PFAS in porewater from contaminated soil, and approaches for pre-treatment of porewater samples to eliminate these interferences to be ready for PFAS-detecting sensors. The review discusses selectivity, a key factor underlying pre-treatment and sensing performance, and explores the interactions between PFAS and various sensors. PFAS chemical nano-sensors discussed are categorized in terms of the detection mechanism (electrochemical and optical). This review aims to provide guidance and outline the current challenges and implications for future routine PFAS sensing linked to soil porewater collection, to achieve more selective and effective PFAS sensors.

Sensing of Co2+ and Cu2+ Ions Using Dimethylamino-functionalized Poly(azomethine-1,3,4-oxadiazole)s

The ability of OxT and OxFl azomethines to recognize metal ions in THF solutions was investigated using UV-vis absorption techniques. Various metal ions, including Cd2+, Hg2+, Co2+, Sn2+, Cu2+, Ni2+, Zn2+ and Ag+, were tested. The absorption spectra revealed two distinct π-π* transition bands in the 273-278 nm and 330-346 nm wavelength ranges. Additionally, OxFl displayed an absorption peak at 309 nm, attributed to the fluorene group. Spectral titrations were used to study the fluorescence behavior in the presence of these metal ions. The results showed significant quenching with Co2+ and Cu2+ ions, while other metal ions had minimal effects on the fluorescence intensity. The quenching mechanism was further analyzed using the Stern-Volmer and Lehrer equations, and the binding constants ( K b fl ) were calculated using the Benesi-Hildebrand relations. The results confirm that Co2+ has a 1:2 stoichiometry and Cu2+ has a 1:1 stoichiometry, indicating the strong affinity of OxFl and OxT for these ions. The negative values of ΔG (Gibbs free energy) suggest that complex formation occurs spontaneously at room temperature.

One-Step Synthesis of White-Light-Emitting Carbon Dots for White LEDs with a High Color Rendering Index of 97

White-light-emitting carbon dots (WCDs) show innate advantages as phosphors in white light-emitting diodes (WLEDs). For WLEDs, the color rendering index (CRI) is the most important metric to evaluate its performance. Herein, WCDs are prepared by a facile one-step solvothermal reaction of trimellitic acid and o-phenylenediamine. It consists of four CDs identified by column chromatography as blue, green, yellow, red, and thus white light is a superposition of these four types of light. The mixture of the four CDs undergoes Förster resonance energy transfer to induce the generation of white light. The photoluminescence of WCDs originates from the synergistic effect of carbon core and surface states. Thereinto, the carbon core states dominate in RCDs, and the increase of amide contents and degree of conjugation promote the redshift of the emission spectra, which is further confirmed by theoretical calculations. In addition, a high CRI of 97 is achieved when the WCDs are used as phosphors to fabricate WLEDs, which is almost the highest value up to now. The multicolor LEDs can also be fabricated by using the four multicolor CDs as phosphors, respectively. This work provides a novel approach to explore the rapid preparation of low-cost, high-performance WCDs and CDs-based WLEDs.

In Vivo Electrochemical Biosensors: Recent Advances in Molecular Design, Electrode Materials, and Electrochemical Devices

Electrochemical biosensors provide powerful tools for dissecting the dynamically changing neurochemical signals in the living brain, which contribute to the insight into the physiological and pathological processes of the brain, due to their high spatial and temporal resolutions. Recent advances in the integration of in vivo electrochemical sensors with cross-disciplinary advances have reinvigorated the development of in vivo sensors with even better performance. In this Review, we summarize the recent advances in molecular design, electrode materials, and electrochemical devices for in vivo electrochemical sensors from molecular to macroscopic dimensions, highlighting the methods to obtain high performance for fulfilling the requirements for determination in the complex brain through flexible and smart design of molecules, materials, and devices. Also, we look forward to the development of next-generation in vivo electrochemical biosensors.

Nanoparticles as Powerful Tools for Crossing the Blood-brain Barrier

The blood-brain barrier (BBB) is considered an important protective barrier in the central nervous system (CNS). The barrier is mainly formed by endothelial cells (ECs) interconnected by various junctions such as tight junctions (TJs), gap junctions, and adherent junctions. They collectively constitute an intensive barrier to the transit of different substances into the brain, selectively permitting small molecules to pass through by passive movement but holding off large ones such as peptides and proteins to cross the brain. Hence some molecules selectively transfer across the BBB by active routes via transcytosis. The BBB also forms a barrier against neurotoxins as well as pathogenic agents. Although various CNS disorders like Alzheimer's disease (AD) and Parkinson's disease (PD) could hamper the integrity of the border. Nevertheless, the BBB acts as a barrier for CNS disorders treatment because it prevents the drugs from reaching their target in the CNS. In recent years, different strategies, including osmotic disruption of BBB or chemical modification of drugs, have been used to transfer the chemotherapeutic agents into brain substances. Nowadays, nanoparticles (NPs) have been used as an effective and non-invasive tool for drug delivery and diagnosis of CNS disorders. In this review, we discuss the structural characteristic of BBB, safe passageways to cross the BBB, and the relation of barrier lesions with different CNS disorders. In the end, we explore the progress in drug delivery, diagnosis, imaging, and treatment of CNS disorders using nanoparticles.

Novel selective "on-off" fluorescence sensor based on julolidine hydrazone-Al3+ complex for Cu2+ ion: DFT study

A hydrazone (T1) was synthesized by reacting 8-hydroxyjulolidine-9-carboxaldehyde with 2-furoic hydrazide and then modified with Al³⁺ ion to form a novel hydrazone Al³⁺ complex (T1-Al³⁺) in an aqueous solution (8% propylene glycol in 10 mM HEPES pH 5.5). The T1-Al³⁺ complex was studied as a Cu²⁺ selective sensor due to its highly efficient capacibility of paramagnetic quenching. The results showed that the T1-Al³⁺ complexed sensor possesses remarkable sensitivity and selectivity for Cu²⁺ ion in 8% propylene glycol in 10 mM HEPES pH 5.5 as compared with other tested analytes. Notably, this sensor has a broad linear detection range of 10-110 µM for Cu²⁺ ion and a detection limit level of 0.62 µM, which is lower than the Cu²⁺ concentration threshold in drinking water designated by the United States Environmental Protection Agency (EPA). Additionally, it was detectable for the presence of Cu²⁺ ion in mineral water and tap water samples. The selectivity of T1-Al³⁺ complexed sensor with Cu²⁺ ion could be explained by the basis of computation with Gaussian software complied with the basis sets of B3LYP/6-31 G(d,p)/LANL2DZ. Furthermore, only T1 exhibited anticancer efficacy against HeLa and U251 cells with MTT assay.

Real-Time Tracking of Electrical Signals and an Accurate Quantification of Chemical Signals with Long-Term Stability in the Live Brain

The development of in vivo analytical tools and methods for recording electrical signals and accurately quantifying chemical signals is a key issue for a comprehensive understanding of brain events. The electrophysiological microelectrode was invented to monitor electrical signals in free-moving brains. On the other hand, electrochemical assays with excellent spatiotemporal resolution provide an effect way to monitor chemical signals in vivo. Unfortunately, the in vivo electrochemical biosensors still have three limitations. First, many biological species such as reactive oxygen species (ROS) and neurotransmitters demonstrate large overpotentials at conventional electrodes. Thus, it is hard to convert the chemical/electrochemical signals of these molecules into electric signals. Second, the interfacial properties of the recognition molecules assembled onto the electrode surfaces have a great influence on the transmission of electric charge through the interface and the stability of the modified recognition molecules. Meanwhile, the surface of biosensors implanted in the brain is easily absorbed by many proteins present in the brain, resulting in the loss of signals. Finally, activities in the brain including neuron discharges and electrophysiological signals may be affected by electrochemical measurements due to the application of extra potentials and/or currents.This Account presents a deep view of the fundamental design principles and solutions in response to the above challenges for developing in vivo biosensors with high performance while meeting the growing requirements, including high selectivity, long-time stability, and simultaneously monitoring electrical and chemical signals. We aim to highlight the basic criteria based on a double-recognition strategy for the selective biosensing of ROS, H₂S, and H_nS through the rational design of specific recognition molecules followed by electrochemical oxidation or reduction. Recent developments in designing functionalized surfaces through a systematic investigation of self-assembly with Au-S bonds, Au-Se bonds, and Au≡C bonds for facilitating electrochemical properties as well as improving the stability are summarized. More importantly, this Account highlights the novel methodologies for simultaneously monitoring electrical and chemical signals ascribed to the dynamic changes in K⁺, Na⁺, and Ca²⁺ and pH values in vivo. Additionally, SERS-based photophysiological microarray probes have been developed for quantitatively tracking chemical changes in the live brain together with recording electrophysiological signals.The design principles and novel strategies presented in this Account can be extended to the real-time tracking of electrical signals and the accurate quantification of more chemical signals such as amino acids, neurotransmitters, and proteins to understand the brain events. The final part also outlines potential future directions in constructing high-density microarrays, eventually enabling the large-scale dynamic recording of the chemical expression of multineuronal signals across the whole brain. There is still room to develop a multifiber microarray which can be coupled with photometric methods to record chemical signals both inside and outside neurons in the live brains of freely moving animals to understand physiological processes and screen drugs.

Nanoarchitectonics of neomycin-derived fluorescent carbon dots for selective detection of Fe3+ ions

The first-ever neomycin antibiotic-based carbon dots (Neo-CDs) were synthesized via a low-cost, eco-friendly, and single-step hydrothermal method using neomycin as a single precursor. The as-prepared Neo-CDs exhibited strong and stable blue fluorescence and were well characterized by TEM, UV-vis absorption, fluorescence emission, IR, XRD, Raman and XPS spectroscopy methods. The Neo-CDs showed a well-distributed size within the range of 4.5 to 7.8 nm, comprising various functional groups on the surface of the carbon core. The Neo-CDs exhibited exceptional emission behaviour, and fluorescence quantum yield was calculated to be 55% in double distilled water. Neo-CDs have been used as a fluorescent sensor for selective and sensitive detection of Fe³⁺ ions in aqueous solution in the fluorescence turn-off mode. From the set of metal ions, only the Fe³⁺ ion showed quenching of fluorescence due to photoinduced (PET) electron transfer from Neo-CDs to the half-filled 3d orbital of Fe³⁺ ions. The limit of detection for Fe³⁺ ions was calculated to be 0.854 μM. Further, the quenching efficiency and Stern-Volmer quenching constant have been calculated which are about 94% and 5.6 × 10⁶ M^-1, respectively.

β-Cyclodextrin/CMK-8-Based Electrochemical Sensor for Sensitive Detection of Cu2

In this work, β-cyclodextrin (β-CD)/mesoporous carbon (CMK-8) nanocomposite was synthesized and used as an electrochemical sensing platform for highly sensitive and selective detection of Cu2+. The morphology and structure of β-CD/CMK-8 were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). In addition, the dates from electrochemical impedance spectroscopy (EIS) and Cyclic voltammetry (CV) demonstrated that the β-CD/CMK-8 possessed a fast electronic transfer rate and large effective surface area. Besides this, the β-CD/CMK-8 composite displayed high enrichment ability toward Cu2+. As a result of these impressive features, the β-CD/CMK-8 modified electrode provided a wide linear response ranging from 0.1 ng·L-1 to 1.0 mg·L-1 with a low detection limit of 0.3 ng·L-1. Furthermore, the repeatability, reproducibility and selectivity of β-CD/CMK-8 towards Cu2+ were commendable. The sensor could be used to detect Cu2+ in real samples. All in all, this work proposes a simple and sensitive method for Cu2+ detection, which provides a reference for the subsequent detection of HMIs.

Fluorescent Carbon Dots and their Applications in Sensing of Small Organic Molecules

Background:

Fluorescence-based sensing is considered highly sensitive and fluorescent probes with improved properties are always desired. Fluorescent carbon dots (CDs) are newly emerging quasi-spherical nanoparticles of less than 10 nm in size and belong to the carbon nano-material’s family. CDs have great potential as fluorescent probes and currently are under open deliberation by the researchers due to their striking properties such as low environmental hazard, high selectivity, greater sensitivity, good biocompatibility, tunable fluorescent properties and excitation dependent multicolor emission behavior.

Introduction:

This review demonstrates various available methods for fabrication of fluorescent CDs, capping of CDs and characterization with various techniques including UV-visible, FT-IR, and TEM. Analytical applications using CDs for the sensing of small organic molecules, specifically nitroaromatic compounds in the environmental samples are complied.

Methods:

The review covers literature related to synthesis and characterization of carbon dots. It includes around 171 research articles in this field.

Results:

Carbon dots can be synthesized using numerous routes. In all cases CDs possess spectral properties with little variation in wavelength maxima. Optical properties of CDs can be tuned by compositing these with metallic quantum dots or by modifying their surface with desired functionalities. HR-TEM is needed to see the morphology and size of particles whereas UV-Visible and FTIR are indispensable tools for this kind of research. These particles are successfully applied to sense small molecules in some matrices.

Conclusion:

Carbon dots are bright stars in fluorescent sensing of small molecules. However, more research is needed to determine small organic molecules in diversified areas of analysis.

Multipurpose made colorimetric materials for amines, pH change and metal ion detection

Sensors are routinely developed for specific applications, but multipurpose sensors are challenging, due to stability and poor functional design. We report organic materials that operate in solution and gas phase. They show a strong response behaviour to at least three types of environmental changes: pH, amine and metal ion binding/detection. We have confirmed and validated our findings using various analytical and computational methods. We found that the changes in polarity of the solvent and pH not only red shift the tail of the absorption spectra, but also extend the peak optical absorption of these structures by up to 100 nm, with consequential effects on the optical gap and colour changes of the materials. Acid–base response has been studied by spectrophotometric titrations with trifluoroacetic acid (TFA) and triethyl amine (TEA). The experiments show excellent reversibility with greater sensitivity to base than acid for all compounds. Analysis into metal sensing using Zn(ii) and Cu(ii) ions as analytes show that the materials can successfully bind the cations forming stable complexes. Moreover, a strong suppression of signal with copper gives an operative modality to detect the copper ion as low as 2.5 × 10⁻⁶ M. The formation of the metal complexes was also confirmed by growing crystals using a slow diffusion method; subsequent single crystal X-ray analysis reveals the ratio of ligand to metal to be 2 to 1. To test sensitivity towards various amine vapours, paper-based sensors have been fabricated. The sensors show a detection capability at 1 ppm of amine concentration. We have employed CIE L*a*b* colour space as the evaluation method, this provides numeric comparison of the samples from different series and allows comparison of small colour differences, which are generally undetectable by the human-eye. It shows that the CIE L*a*b* method can assess both sensitivity to a particular class of analytes and a specificity response to individual amines in this subclass offering an inexpensive and versatile methodology.

Multi-responsive colorimetric sensors based on the hydrazone motif, which are perfectly suited for chemo sensing applications have been developed.

Facile preparation of Cu-doped carbon dots for naked-eye discrimination of phenylenediamine isomers and highly sensitive ratiometric fluorescent detection of H2O2

Changing a detection analyte into a colored material is a key challenge for visual discrimination of isomers. In this work, a novel fluorescent probe incorporating Cu-doped carbon dots (Cu-CDs), for the first time, was developed for naked-eye discrimination of phenylenediamine isomers and highly sensitive ratiometric fluorescence detection of H₂O₂. In this strategy, Cu-CDs were synthesized by a facile hydrothermal approach using citric acid, formamide, and CuCl₂ as reactants. The prepared Cu-CDs exhibited outstanding peroxidase-like activity and stability. Consequently, a chemosensor platform based on Cu-CDs was constructed to enable naked-eye discrimination of phenylenediamine isomers through the H₂O₂-mediated oxidation reaction. Moreover, a Cu-CDs-based ratiometric fluorescence sensor was proposed as a means to sensitively detect H₂O₂ with a detection limit of 5.0 nM. The sensor was further employed for monitoring H₂O₂ in human serum, indicating its potential applications in other biologically related study.

Carbon Nanotubes, Graphene, and Carbon Dots as Electrochemical Biosensing Composites

Carbon nanomaterials (CNMs) have been extensively used as electrochemical sensing composites due to their interesting chemical, electronic, and mechanical properties giving rise to increased performance. Due to these materials' unknown long-term ecological fate, care must be given to make their use tractable. In this review, the design and use of carbon nanotubes (CNTs), graphene, and carbon dots (CDs) as electrochemical sensing electrocatalysts applied to the working electrode surface are surveyed for various biosensing applications. Graphene and CDs are readily biodegradable as compared to CNTs. Design elements for CNTs that carry over to graphene and CDs include Coulombic attraction of components and using O or N atoms that serve as tethering points for attaching electrocatalytically active nanoparticles (NPs) and/or other additives.

Free-electrodeposited anodic stripping voltammetry sensing of Cu(II) based on Ti3C2Tx MXene/carbon black

A proof-of-principle concept for free-electrodeposited anodic stripping voltammetry (ASV) sensing of Cu²⁺ is proposed by using Ti₃C₂T_x MXene/carbon black (Ti₃C₂T_x@CB) nanohybrids as electrode materials. Owing to the high adsorption and reduction capability of Ti₃C₂T_x towards Cu²⁺, Ti₃C₂T_x MXene enables Cu²⁺ to be immobilized and self-reduced directly to form Cu⁰ on the Ti₃C₂T_x@CB electrode surface. As a result an oxidation peak current appears from the re-oxidation of Cu⁰ via differential pulse voltammetry. Carbon black (CB) was introduced to prevent Ti₃C₂T_x Mxene aggregation and improve the related electron transfer as well as enhance their surface area. After optimizing various conditions, a considerable low limit of detection (4.6 nM) and a wide linear range (0.01-15.0 μM) for Cu²⁺ were achieved at the working potential from - 0.3 V to 0.0 V (vs SCE). Relative standard deviation (RSD) of eight individual Ti₃C₂T_x@CB electrodes is 3.72%, and the recoveries from tap water sample and lake water sample were in the ranges of 97.0-108% and 104-107%, respectively.

Anchoring zinc-doped carbon dots on a paper-based chip for highly sensitive fluorescence detection of copper ions

In this work, zinc-doped carbon dots (Zn-CDs) were anchored on a three-dimensional wheel type paper-based microfluidic chip, and were decorated with 6-mercaptonicotinic acid (MNA) and L-cysteine (L-Cys) for highly sensitive and rapid fluorescence detection of Cu²⁺. Zn-CDs were first anchored on paper through the amide bonds between the carboxyl groups of the Zn-CDs and the amino groups of the paper. Afterwards, Zn-CDs were decorated with MNA and L-Cys, effectively preventing the Zn-CDs from aggregation. The nitrogen atom on the pyridine ring and the carboxylic acid groups in MNA and L-Cys coordinated with Cu²⁺ to form a nonfluorescent ground-state complex, causing the fluorescence quenching of the Zn-CDs. The three-dimensional rotary design could simplify the operation process and achieve simultaneous analysis of multiple samples with different concentrations. Under optimal conditions, the fluorescent sensor exhibits linear response for the determination of Cu²⁺ in the range from 0.1 to 60 μg L^-1 with the detection limit (LOD) of 0.018 μg L^-1. The proposed strategy provides a novel way for the highly sensitive detection of Cu²⁺ in a complex water environment.

A selective and sensitive near-infrared fluorescent probe for real-time detection of Cu(i)

The disruption of copper homeostasis (Cu+/Cu2+) may cause neurodegenerative disorders. Thus, the need for understanding the role of Cu+ in physiological and pathological processes prompted the development of improved methods of Cu+ analysis. Herein, a new near-infrared (NIR) fluorescent turn-on probe (NPCu) for the detection of Cu+ was developed based on a Cu+-mediated benzylic ether bond cleavage mechanism. The probe showed high selectivity and sensitivity toward Cu+, and was successfully applied for bioimaging of Cu+ in living cells.

Nonenzymatic Electrochemical Sensor with Ratiometric Signal Output for Selective Determination of Superoxide Anion in Rat Brain

There is still an urgent need to develop reliable analytical methods of O₂^•- in vivo for deeply elucidating the roles of O₂^•- playing in the brain. Herein, a nonenzymatic electrochemical sensor with ratiometric signal output was developed for an in vivo analysis of O₂^•- in the rat brain. Diphenylphosphonate-2-naphthol ester (ND) was designed and synthesized as a specific recognition molecule for the selective determination of O₂^•-. An anodic peak ascribed to the oxidation of 2-naphthol was generated via the nucleophilic substitution between ND and O₂^•- and was increased with the increasing concentration of O₂^•-. Meanwhile, the inner reference of methylene blue (MB) was co-assembled at the electrode surface to enhance the determination accuracy of O₂^•-. The anodic peak current ratio between 2-naphthol and MB exhibited a good linear relationship with the concentration of O₂^•- from 2 to 200 μM. Because of the stable molecule character of ND and its specific reaction with O₂^•-, the developed electrochemical sensor demonstrated excellent selectivity toward various potential interferences in the brain and good stability even after storage for 7 days. Accordingly, the present electrochemical sensor with high selectivity, high stability, and high accuracy was successfully exploited in monitoring the levels of O₂^•- in the rat brain and that of the diabetic model followed by cerebral ischemia.

Europium(III) complex fluorescent sensor for dual channel recognition of Sn2+ and Cu2+ ions in water

A new europium(III) complex Eu(tta)₃L₁ (1a) (L₁ = (2-(3,5-dimethoxyphenyl)-1H-imidazo[4,5-f][1,10]phenanthroline), tta = 2-thenoyltrifluoroacetone) has been prepared and synthesized. The structure of complex was completely determined by several different analytical techniques including single-crystal X-ray diffraction, ¹H and ¹³C NMR. The crystal structure of the complex 1a belonged to monoclinic system with the space group P2₁/n. Its fluorescent properties were systematically studied in details by adding different metal ions in deionized water. Upon addition of Sn²⁺, its fluorescence intensity was strengthened and centered at 460 nm. And when Cu²⁺ was added, its fluorescence emission intensity was quenched quickly. The LODs for Sn²⁺ and Cu²⁺ were calculated to be 4.52 × 10^-7 mol L^-1 and 1.11 × 10^-7 mol L^-1, respectively. Furthermore, this sensor was successfully employed to monitor Sn²⁺ and Cu²⁺ in practical samples.

Fructose Removal from the Diet Reverses Inflammation, Mitochondrial Dysfunction, and Oxidative Stress in Hippocampus

Young age is often characterized by high consumption of processed foods and fruit juices rich in fructose, which, besides inducing a tendency to become overweight, can promote alterations in brain function. The aim of this study was therefore to (a) clarify brain effects resulting from fructose consumption in juvenile age, a critical phase for brain development, and (b) verify whether these alterations can be rescued after removing fructose from the diet. Young rats were fed a fructose-rich or control diet for 3 weeks. Fructose-fed rats were then fed a control diet for a further 3 weeks. We evaluated mitochondrial bioenergetics by high-resolution respirometry in the hippocampus, a brain area that is critically involved in learning and memory. Glucose transporter-5, fructose and uric acid levels, oxidative status, and inflammatory and synaptic markers were investigated by Western blotting and spectrophotometric or enzyme-linked immunosorbent assays. A short-term fructose-rich diet induced mitochondrial dysfunction and oxidative stress, associated with an increased concentration of inflammatory markers and decreased Neurofilament-M and post-synaptic density protein 95. These alterations, except for increases in haptoglobin and nitrotyrosine, were recovered by returning to a control diet. Overall, our results point to the dangerous effects of excessive consumption of fructose in young age but also highlight the effect of partial recovery by switching back to a control diet.

An "on-off-on" selective fluorescent probe based on nitrogen and sulfur co-doped carbon dots for detecting Cu2+ and GSH in living cells

The abnormal level of Cu²⁺ or GSH can cause variety of neurodegenerative diseases in humans. Thus, the selective and sensitive detection of Cu²⁺ and GSH has inspired intensive research efforts in biological sample analysis fields. Herein, an "on-off-on" fluorescent probe based on nitrogen and sulfur co-doped carbon dots (N,S-CDs) has been successfully prepared for the detection of Cu²⁺ and GSH. The "turn-off" process of fluorescence in the presence of Cu²⁺ ions was induced by forming a non-luminescent ground state complex due to the interaction between surface groups of the probe and Cu²⁺ ions. Moreover, the strong coordination between GSH and Cu²⁺ could destroy the structure of the complex and restore the fluorescence to "turn-on". This fluorescent probe had excellent selectivity and high sensitivity toward Cu²⁺ and GSH with the limits of detection (LODs) of 38 nM and 41 nM. More importantly, the as-prepared N,S-CDs served as an efficient fluorescent probe for not only detecting Cu²⁺ ions in lake water and tap water, and GSH in BSA solution, but also sensing Cu²⁺ and GSH in living cells. Therefore, these N,S-CDs could be considered as a promising fluorescence probe candidate for environmental monitoring and biological imaging.

"Luminescent carbon nanodots: Current prospects on synthesis, properties and sensing applications"

"Nanocarbon science" ignited interest owing to its substantial scope in biomedicine, energy and environment-beneficial applications. Carbon dots (C-dots), a multi-faceted nanocarbon material, emerged as a homologue to graphene and henceforth geared extensive investigation both on its properties and applications. Eximious properties like excitation-wavelength tunable fluorescence emission, up-converted photoluminescence, photon-induced electron transfer, low cytotoxicity, chiroptical behavior, high chemical and photostability set the ground for astounding applications of carbon dots. Abundant availability of raw "green" precursors complementary to other molecular/graphitic precursors make them environmentally benign, inexpensive and ultimately "nanomaterials of the current decade". This review focuses on the synthesis of carbon dots not only from natural sources but also from other carbonaceous precursors and contemplates the inherent but controversial properties. We also aim to garner the attention of readers to the recent progress achieved by C-dots in one of its prestantious area of applications as nanosensors.

Quantum dots as nanosensors for detection of toxics: a literature review

Great advances have been made in sensor-based methods for chemical analysis owing to their high sensitivity, selectivity, less testing time, and minimal usage of chemical reagents. Quantum Dots (QDs) having excellent optical properties have been thoroughly explored for variety of scientific applications wherein light plays an important role. In recent years, there have been an increasing number of publications on the applications of QDs as photoluminescent nanosensors for the detection of chemicals and biomolecules. However, there has been hardly any publication describing the use of QDs in the detection of various toxic chemicals at one place. Hence, a literature survey has been made on the applications of QDs as chemosensors for the detection of gaseous, anionic, phenolic, metallic, drug-overdose, and pesticide poison so as to open a new perspective towards the role of sensors in analytical toxicology. In this review, the QD-based analysis of biospecimens for poison detection in clinical and forensic toxicology laboratories is highlighted.

A fluorescence imaging protocol for correlating intracellular free cationic copper to the total uptaken copper by live cells

A variety of fluorescence probes have been developed for fluorescence imaging of metals in biological cells. However, accurate quantification of metals with fluorescent approaches is challenging due to the difficulty in establishing a standard calibration curve in living cells. Herein, a fluorescence imaging protocol is developed for imaging intracellular Cu²⁺ and its correlation with the cellular uptake of copper. The total amount of intracellular Cu is detected by inductively coupled plasma mass spectrometry (ICP-MS) in parallel. Fluorescence imaging of Cu²⁺ is accomplished with Rhodamine B derivative modified carbon dots (CDs-Rbh) based on fluorescence resonance energy transfer (FRET) from CDs to rhodamine. Intracellular Cu²⁺ is correlated with fluorescence ratio at λ_em 500-600 nm (rhodamine) to λ_em 425-475 nm (CDs) with excitation at λ_ex 405 nm. It is found that Cu²⁺ is linearly correlated with the total intracellular uptaken copper content, with a linear correlation between the relative fluorescence ratio in fluorescence imaging and intracellular Cu derived from ICP-MS, including both Cu(I) and Cu(II) species. The linear calibration equation is lg(F₂/F₁) = 0.00148 m[Cu]-0.3622. This approach facilitates further investigation and elucidation of copper transition in live cells and the evaluation of their cytotoxicity.

Functional Carbon Quantum Dots for Highly Sensitive Graphene Transistors for Cu2+ Ion Detection

Cu²⁺ ions play essential roles in various biological events that occur in the human body. It is important to establish an efficient and reliable detection of Cu²⁺ ions for people's health. The solution-gated graphene transistors (SGGTs) have been extensively investigated as a promising platform for chemical and biological sensing applications. Herein, highly sensitive and highly selective sensor for Cu²⁺ ion detection is successfully constructed based on SGGTs with gate electrodes modified by functional carbon quantum dots (CQDs). The sensing mechanism of the sensor is that the coordination of CQDs and Cu²⁺ ions induces the capacitance change of the electrical double layer (EDL) near the gate electrode and then results in the change of channel current. Compared to other metal ions, Cu²⁺ ions have an excellent binding nature with CQDs that make it an ultrahigh selective sensor. The CQD-modified sensor achieves excellent Cu²⁺ ion detection with a minimal level of concentration (1 × 10^-14 M), which is several orders of magnitude lower than the values obtained from other conventional detection methods. Interestingly, the device also displays a quick response time on the order of seconds. Due to the functionalized nature of CQDs, SGGTs with CQD-modified gate show good prospects to achieve multifunctional sensing platform in biochemical detections.

Review of Carbon and Graphene Quantum Dots for Sensing

Carbon and graphene quantum dots (CQDs and GQDs), known as zero-dimensional (0D) nanomaterials, have been attracting increasing attention in sensing and bioimaging. Their unique electronic, fluorescent, photoluminescent, chemiluminescent, and electrochemiluminescent properties are what gives them potential in sensing. In this Review, we summarize the basic knowledge on CQDs and GQDs before focusing on their application to sensing thus far followed by a discussion of future directions for research into CQDs- and GQD-based nanomaterials in sensing. With regard to the latter, the authors suggest that with the potential of these nanomaterials in sensing more research is needed on understanding their optical properties and why the synthetic methods influence their properties so much, into methods of surface functionalization that provide greater selectivity in sensing and into new sensing concepts that utilize the virtues of these nanomaterials to give us new or better sensors that could not be achieved in other ways.

Multipurpose sensing applications of biocompatible radish-derived carbon dots as Cu2+ and acetic acid vapor sensors

A recent trend in the preparation of carbon dots, optically unique nanomaterials, revolves around the use of readily-available, low-cost natural resources as precursors and their multipurpose applications. In this work, a hydrothermal method for preparing biocompatible carbon dots from radish was developed. The carbon dots were then tested for sensing of Cu²⁺ and acetic acid vapor. The carbon dots exhibited blue emission under UV illumination with, a quantum yield of 15%. The fluorescence emission was selectively quenched when Cu²⁺ ions were added, giving a detection limit of 0.16 μM. A paper-based fluorescent sensor was fabricated and shown to sense Cu²⁺ with a limit of detection of 6.8 μM. The carbon dots were able to determine the Cu²⁺ concentration in real water samples, with excellent recovery and reliability. The carbon dots were also used as the sensing material in an optical electronic nose, and tested for real-time detection of acetic acid vapor. Using principal component analysis, different ratios of acetic acid to methanol in solution were successfully identified with a detection limit of 15.5%. The acetic acid concentration in a real vinegar sample was also accurately determined. Our results demonstrated that label-free carbon dots derived from readily available radish can be simply used as versatile probes, giving them potential uses in multipurpose sensing applications.

On-line regeneration of electrochemical biosensor for in vivo repetitive measurements of striatum Cu2+ under global cerebral ischemia/reperfusion events

The detection of Cu²⁺ ion, one of the metal ions substantial in cerebral physiology, is critical in studying brain activities and understanding brain functions. However, repetitive measurements of Cu²⁺ in the progress of physiological and pathological events is still challenging, because lack of the platform for repetitive on-line detection-regeneration cycle. Herein we report the design of a regenerated electrochemical biosensor combined with the in vivo microdialysis system. In this biosensor, hyperbranched polyethyleneimine (hPEI) acts as a regenerated recognition unit for Cu²⁺. Just by a simple rinse of ethylenediaminetetraacetic acid (EDTA) disodium salt, the Cu²⁺ and Cu⁺ ions on the biosensor interface were chelated with EDTA disodium salt, thus achieving the regeneration of the biosensor. In addition, 6-(ferrocenyl)hexanethiol (FcHT) serves as the inner reference moiety to elevate the sensing accuracy over regeneration cycles. As a result, this ratiometric electrochemical biosensor not only revealed high sensitivity and selectivity, but also exhibited excellent stability during multiple regeneration processing. This biosensor was capable of determining Cu²⁺ with a linear range between 0.05 and 12 μM and low detection limit (LOD) of 13 nM. Then, the platform has been successfully applied in repetitive Cu²⁺ analysis in rat brain under global cerebral ischemia/reperfusion events. The combination of results from 7 rats indicates global cerebral ischemia caused an obvious increase of the Cu²⁺ level, while reperfusion brought this level back to normal.

A "Turn-On" Fluorescence Copper Biosensor Based on DNA Cleavage-Dependent Graphene Oxide-dsDNA-CdTe Quantum Dots Complex

A novel “turn-on” fluorescent copper biosensor is developed successfully based on the graphene oxide (GO)-dsDNA-CdTe quantum dots (QDs) complex via chemical crosslink method. The optical and structure properties of GO-dsDNA-CdTe QDs complex are studied by fluorescence (FL) spectra and transmission electron microscopy (TEM) in detail. It is demonstrated that the fluorescence quenching of CdTe QDs is a process of fluorescence resonance energy transfer (FRET) due to the essential surface and quenching properties of two-dimensional GO. Copper ions induce the catalytic reaction of DNA chain and irreversibly break at the cleavage site, which will cause the G-quadruplex formation, moreover further result in the CdTe QDs separated from GO and restored its fluorescence. Therefore, a significant recovery effect on the fluorescence of the GO-dsDNA-CdTe QDs complex is observed in the presence of copper ions. The fluorescence responses are concentration-dependent and can be well described by a linear equation. Compared with other metal ions, the sensor performs good selectivity for copper ions.

Dual-Analyte Fluorescent Sensor Based on [5]Helicene Derivative with Super Large Stokes Shift for the Selective Determinations of Cu2+ or Zn2+ in Buffer Solutions and Its Application in a Living Cell

A new fluorescent sensor, M201-DPA, based on [5]helicene derivative was utilized as dual-analyte sensor for determination of Cu²⁺ or Zn²⁺ in different media and different emission wavelengths. The sensor could provide selective and bifunctional determination of Cu²⁺ in HEPES buffer containing Triton-X100 and Zn²⁺ in Tris buffer/methanol without interference from each other and other ions. In HEPES buffer, M201-DPA demonstrated the selective ON-OFF fluorescence quenching at 524 nm toward Cu²⁺. On the other hand, in Tris buffer/methanol, M201-DPA showed the selective OFF-ON fluorescence enhancement upon the addition of Zn²⁺, which was specified by the hypsochromic shift at 448 nm. Additionally, M201-DPA showed extremely large Stokes shifts up to ∼150 nm. By controlling the concentration of Zn²⁺ and Cu²⁺ in a living cell, the imaging of a HepG2 cellular system was performed, in which the fluorescence of M201-DPA in the blue channel was decreased upon addition of Cu²⁺ and was enhanced in UV channel upon addition of Zn²⁺. The detection limits of M201-DPA for Cu²⁺ and Zn²⁺ in buffer solutions were 5.6 and 3.8 ppb, respectively. Importantly, the Cu²⁺ and Zn²⁺ detection limits of the developed sensors were significantly lower than permitted Cu²⁺ and Zn²⁺ concentrations in drinking water as established by the U.S. EPA and WHO.

Designing Recognition Molecules and Tailoring Functional Surfaces for In Vivo Monitoring of Small Molecules in the Brain

The in vivo analysis of chemical signals in brain extracellular fluid (ECF) using implanted electrochemical biosensors is a vital way to study brain functions and brain activity mapping. This approach offers excellent spatial (10-200 μm) and temporal (approximately second) resolution and the major advantage of long-term stability. By implantation of a microelectrode in a specific brain region, changes in the concentration of a variety of ECF chemical species can be monitored through applying a suitable electrical signal and, typically, recording the resulting Faradaic current. However, the high performance requirements for in vivo biosensors greatly limit our understanding of the roles that biomolecules play in the brain. Since a large number of biological species, including reactive oxygen species (ROS), metal ions, amino acids, and proteins, coexist in the brain and interact with each other, developing in vivo biosensors with high selectivity is a great challenge. Meanwhile, it is difficult to quantitatively determine target molecules in the brain because of the variation in the distinct environments for monitoring biomolecules in vitro and in vivo. Thus, there are large errors in the quantification of concentrations in the brain using calibration curves obtained in artificial cerebrospinal fluid (aCSF). More importantly, to gain a full understanding of the physiological and pathological processes in the brain, the development of novel approaches for the simultaneous determination of multiple species in vivo is urgently needed. This Account provides insight into the basic design principles and criteria required to convert chemical/electrochemical reactions into electric signals, while satisfying the increasing requirements, including high selectivity, sensitivity, and accuracy, for the in vivo analysis of biomolecules in the brain. Recent developments in designing various functional surfaces, such as self-assembled monolayers, gold nanostructures, and nanostructured semiconductors for facilitating electron transfer from specific enzymes, including superoxide dismutase (SOD), and further application to an O₂^•- biosensor are summarized. This Account also aims to highlight the design principles for the selective biosensing of Cu²⁺ and pH in the brain through the rational design and synthesis of specific recognition molecules. Additionally, electrochemical ratiometric biosensors with current signal output have been constructed to correct the effect of distinct environments in a timely manner, thus greatly improving the accuracy of the determination of Cu²⁺ in the live brain. This method of using a built-in element has been extended to biosensors with the potential signal output for in vivo pH analysis. More importantly, the new concept of both current and potential signal outputs provides an avenue to simultaneously determine dual species in the brain. The extension of the design principles and developed strategy demonstrated in this Account to other biomolecules, which may be closely correlated to the biological processes of brain events, is promising. The final section of this Account outlines potential future directions in tailoring functional surfaces and designing recognition molecules based on recent advances in molecular science, nanoscience and nanotechnology, and biological chemistry for the design of advanced devices with multiple target species to map the molecular imaging of the brain. There are still opportunities to engineer surfaces that improve on this approach by constructing implantable, multifunctional nanodevices that promise to combine the benefits of multiple sensing and therapeutic modules.

Voltammetric sensing based on the use of advanced carbonaceous nanomaterials: a review

This review (with 210 references) summarizes recent developments in the design of voltammetric chemical sensors and biosensors based on the use of carbon nanomaterials (CNMs). It is divided into subsections starting with an introduction into the field and a description of its current state. This is followed by a large section on various types of voltammetric sensors and biosensors using CNMs with subsections on sensors based on the use of carbon nanotubes, graphene, graphene oxides, graphene nanoribbons, fullerenes, ionic liquid composites with CNMs, carbon nanohorns, diamond nanoparticles, carbon dots, carbon nanofibers and mesoporous carbon. The third section gives conclusion and an outlook. Tables are presented on the application of such sensors to voltammetric detection of neurotransmitters, metabolites, dietary minerals, proteins, heavy metals, gaseous molecules, pharmaceuticals, environmental pollutants, food, beverages, cosmetics, commercial goods and drugs of abuse. The authors also describe advanced approaches for the fabrication of robust functional carbon nano(bio)sensors for voltammetric quantification of multiple targets. Graphical Abstract Featuring execellent electrical, catalytic and surface properies, CNMs have gained enormous attention for designing voltammetric sensors and biosensors. Functionalized CNM-modified electrode interfaces have demonstrated their prominent role in biological, environmental, pharmaceutical, chemical, food and industrial analysis.

Nitrogen-doped carbon quantum dots for fluorescence detection of Cu2+ and electrochemical monitoring of bisphenol A

Nitrogen-doped carbon dots were applied in the fluorescence detection of Cu²⁺ and electrochemical detection of BPA.

Carbon dot doped silica nanoparticles as fluorescent probe for determination of bromate in drinking water samples

A simple and effective strategy for designing a fluorescent probe for bromate was described in this work. Organosilane modified carbon dots were prepared by pyrolysis of citric acid in N-(β-aminoethyl)-γ-aminopropyl methyldimethoxysilane solvent at 230 °C and further doped onto silica nanoparticles by a silylation reaction. The fluorescence of carbon dot doped silica nanoparticles was quenched by bromate in acidic medium. By utilizing this property, the nanoparticle could be used as a sensor to detect bromate. The parameters affecting the performance of the sensor probe such as types of acid medium, acid concentration, reaction temperature, and time were investigated and optimized. The detection limit of the sensor was found to be 1.1 ng mL−1, with a linear range from 8 to 400 ng mL−1 and relative standard deviation of 2.0% (150 ng mL−1, n = 9). The method was successfully applied to the determination of bromate in drinking water samples, and the recoveries were in the range of 96.3%–103.7%.

Self-doped nontoxic red-emitting Mg–N-embedded carbon dots for imaging, Cu(ii) sensing and fluorescent ink

The easy fabrication of self-doped red-emitting CD is described here where the addition of external dopant materials is either can be avoided or minimized.