Enhancing photoinduced electron transfer efficiency of fluorescent pH-probes with halogenated phenols

Quinolinium-Based Fluorescent Probes for Dynamic pH Monitoring in Aqueous Media at High pH Using Fluorescence Lifetime Imaging

Spatiotemporal pH imaging using fluorescence lifetime imaging microscopy (FLIM) is an excellent technique for investigating dynamic (electro)chemical processes. However, probes that are responsive at high pH values are not available. Here, we describe the development and application of dedicated pH probes based on the 1-methyl-7-amino-quinolinium fluorophore. The high fluorescence lifetime and quantum yield, the high (photo)stability, and the inherent water solubility make the quinolinium fluorophore well suited for the development of FLIM probes. Due to the flexible fluorophore-spacer-receptor architecture, probe lifetimes are tunable in the pH range between 5.5 and 11. An additional fluorescence lifetime response, at tunable pH values between 11 and 13, is achieved by deprotonation of the aromatic amine at the quinolinium core. Probe lifetimes are hardly affected by temperature and the presence of most inorganic ions, thus making FLIM imaging highly reliable and convenient. At 0.1 mM probe concentrations, imaging at rates of 3 images per second, at a resolution of 4 μm, while measuring pH values up to 12 is achieved. This enables the pH imaging of dynamic electrochemical processes involving chemical reactions and mass transport.

Dualistic Fluorescence as Well as Portable Smartphone-Assisted RGB-Relied Sensing Assay for the Ultra-Sensitive Determination of Pendimethalin in Food and Water Samples by AIEE Active Organic Probes

Herein, a peculiar fluorometric as well as smartphone-assisted RGB-relied sensing assay is introduced for determining pendimethalin (PDM) herbicide contents (in parts per trillion level) based on the anthracene-incorporated pyrimidinone/thione probes (S1 to S4). These compounds offered a unique and impressive aggregation-induced emission enhancement (AIEE) behavior by aggregation in H₂O-dimethylformamide medium. Furthermore, these AIEE active compounds were found to display superior selectivity and extraordinary sensitivity for PDM detection via fluorescence quenching response. The extent of quenching degree was found to be linearly varied with the PDM concentration ranging from 0 to 20 nM, with a lower limit of detection of 367.8 pM (103.4 ppt) by S3 nanoaggregates. The detailed investigation revealed that such a high sensitivity of the designed sensor toward PDM is attributable to the existence of dual "photoinduced charge transfer and Förster resonance energy transfer process mechanisms". The Stern-Volmer plots, Job's plot, Benesi-Hildebrand plot, and ¹H NMR titrations as well indicated the existence of substantial interactions between the sensor and PDM. The conducted selectivity tests provided distinguishable selectivity for PDM detection over various other insecticides/pesticides as well as other structural nitro analogues. Additionally, the presented sensing assay was also applied to quantify the PDM residues in spiked food (vegetables, fruits, and grains) and water samples. In addition, the sensor-coated fluorescent paper test strips were also fabricated for on-site detection of PDM. The applicability of smartphone-relied RGB analysis significantly streamlined the operation process, speeds up the detection procedure, and also offered a novel methodology for real-time analysis of PDM in real samples.

Simple Fluorescence Sensing Approach for Selective Detection of Fe3+ Ions: Live-Cell Imaging and Logic Gate Functioning

A pyrene-based fluorescent chemosensor APSB [N-(pyrene-1-ylmethylene) anthracen-2-amine] was designed and developed by a simple condensation reaction between pyrene carboxaldehyde and 2-aminoanthracene. The APSB fluorescent sensor selectively binds Fe³⁺ in the presence of other metal ions. Apart from this, APSB shows high selectivity and sensitivity toward Fe³⁺ ion detection. The detection limit for APSB was 1.95 nM, and the binding constant (K _b) was obtained as 8.20 × 10⁵ M^-1 in DMSO/water (95/5, v/v) medium. The fluorescence quantum yields for APSB and APSB-Fe³⁺ were calculated as 0.035 and 0.573, respectively. The function of this fluorescent sensor APSB can be explained through the photo-induced electron transfer mechanism which was further proved by density functional theory studies. Finally, a live-cell image study of APSB in HeLa cells was also carried out to investigate the cell permeability of APSB and its efficiency for selective detection of Fe³⁺ in living cells.

Measuring the pH of Acidic Vesicles in Live Cells with an Optimized Fluorescence Lifetime Imaging Probe

Acidification of intracellular vesicles, such as endosomes and lysosomes, is a key pathway for regulating the function of internal proteins. Most conventional methods of measuring pH are not satisfactory for quantifying the pH inside these vesicles. Here, we investigated the molecular requirements for a fluorescence probe to measure the intravesicular acidic pH in living cells by means of fluorescence lifetime imaging microscopy (FLIM). The developed probe, m-DiMeNAF488, exhibits a pH-dependent equilibrium between highly fluorescent and moderately fluorescent forms, which has distinct and detectable fluorescence lifetimes of 4.36 and 0.58 ns, respectively. The pK_a(τ) value of m-DiMeNAF488 was determined to be 4.58, which would be favorable for evaluating the pH in the acidic vesicles. We were able to monitor the pH changes in phagosomes during phagocytosis by means of FLIM using m-DiMeNAF488. This probe is expected to be a useful tool for investigating acidic pH-regulated biological phenomena.

A Highly Fluorescent Pyrene-Based Sensor for Selective Detection Of Fe3+ Ion in Aqueous Medium: Computational Investigations

In this work, we introduce a highly selective and sensitive fluorescent sensor based on pyrene derivative for Fe(III) ion sensing in DMSO/water media. 2-(pyrene-2-yl)-1-(pyrene-2-ylmethyl)-1H-benzo[d]imidazole (PEBD) receptor was synthesized via simple condensation reaction and confirmed by spectroscopic techniques. The receptor exhibits fluorescence quenching in the presence of Fe(III) ions at 440 nm. ESI-MS and Job's method were used to confirm the 1:1 molar binding ratio of the receptor PEBD to Fe(III) ions. Using the Benesi-Hildebrand equation the binding constant value was determined as 8.485 × 10³ M^-1. Furthermore, the limit of detection (LOD, 3σ/K) value was found to be 1.81 µM in DMSO/water (95/5, v/v) media. According to the Environmental Protection Agency (EPA) of the United States, it is lower than the acceptable value of Fe³⁺ in drinking water (0.3 mg/L). The presence of 14 other metal ions such Co²⁺, Cr³⁺, Cu²⁺, Fe²⁺, Hg²⁺, Pb²⁺, K⁺, Ni²⁺, Mg²⁺, Cd²⁺, Ca²⁺, Mn²⁺, Al³⁺, and Zn²⁺ did not interfere with the detection of Fe(III) ions. The fluorescence life-time of the receptor PEBD with and without Fe³⁺ ion was found to be 1.097 × 10^-9 s and 0.9202 × 10^-9 s respectively. Similarly, the quantum yield of the receptor PEBD with Fe³⁺ and without Fe³⁺ ion was calculated, and found as 0.05 and 0.25 respectively. Computational studies of the receptor PEBD were carried out with density functional theory (DFT) using B3LYP/ 6-311G (d, p), LANL2DZ level of theory.

Room temperature synthesis of perylene diimides facilitated by high amic acid solubility

A novel protocol for the synthesis of perylene diimides (PDIs), by reacting perylene dianhydride (PDA) with aliphatic amines is reported. Full conversions were obtained at temperatures between 20 and 60 °C, using DBU as the base in DMF or DMSO. A “green” synthesis of PDIs, that runs at higher temperatures, was developed using K₂CO₃ in DMSO. The reaction sequence for the imidization process, via perylene amic acid intermediates (PAAs), has been confirmed experimentally aided by the synthesis and full characterization of stable model amic acid salts and amic esters. Kinetic studies, using absorption spectroscopy, have established that PDI formation proceeds via fast amic acid formation, followed by a slow conversion to imides. Solubility of the intermediate PAA salts is found to be low and rate-limiting. Based on this finding, quantitative PDI synthesis at room temperature was achieved by diluting the reaction mixture with water, the solvent in which PAA salts have better solubility. Thus, the otherwise harsh synthesis of PDIs has been transformed into an extremely convenient functional group tolerant and highly efficient reaction that runs at room temperature.

Perylene diimides (PDIs) are synthesised at room temperature and obtained in quantitative yields after a single filtration. High solubility of the intermediate amic acid salts 5 and 9 is key to the success of this novel synthesis.

Borisov S. Carbazole- and Fluorene-Fused Aza-BODIPYs: NIR Fluorophores with High Brightness and Photostability

Three new aza-BODIPY dyes incorporating fused fluorene or carbazole moieties have been prepared. The dyes show significant enhancement of photophysical properties compared to the parent 1,3,5,7-tetraphenyl aza-BODIPY (TPAB): a bathochromic shift of the absorption maximum (up to 2700 cm-1 ) and emission maximum (up to 2270 cm-1 ); an almost threefold increase in molar absorption coefficients (to ca. 230 000 M-1  cm-1 ) and a significant increase in the fluorescence quantum yield to 49-66 %. Owing to the combination of these properties, the new aza-BODIPY dyes belong to the brightest NIR dyes reported. The dyes also show excellent photostability. Due to their outstanding properties, the new dyes represent a promising platform for further exploration in biomedical research. A pH indicator containing only one fused carbazole unit was also prepared and shows absorption and emission spectra that are bathochromically shifted by about 110 and 100 nm, respectively, compared to the indicator dye based on the TPAB chromophore.

Synthesis of Dihydroquinolines as Scaffolds for Fluorescence Sensing of Hydroxyl Radical

A mild synthetic method to prepare dihydroquinolines has been presented. These dihydroquinolines, for the first time, showed great potential for fluorescence detection of the important biorelevant hydroxyl radicals (^•OH). Sensitive and selective ^•OH detection and intracellular organelle-targeted fluorescence imaging of ^•OH have been demonstrated by using one of the synthetic dihydroquinolines. Moreover, dihydroquinoline has also exhibited promising potential to construct advanced fluorescence probes for ^•OH with tunable photophysical properties.

Optical Sensing and Imaging of pH Values: Spectroscopies, Materials, and Applications

This is the first comprehensive review on methods and materials for use in optical sensing of pH values and on applications of such sensors. The Review starts with an introduction that contains subsections on the definition of the pH value, a brief look back on optical methods for sensing of pH, on the effects of ionic strength on pH values and pKa values, on the selectivity, sensitivity, precision, dynamic ranges, and temperature dependence of such sensors. Commonly used optical sensing schemes are covered in a next main chapter, with subsections on methods based on absorptiometry, reflectometry, luminescence, refractive index, surface plasmon resonance, photonic crystals, turbidity, mechanical displacement, interferometry, and solvatochromism. This is followed by sections on absorptiometric and luminescent molecular probes for use pH in sensors. Further large sections cover polymeric hosts and supports, and methods for immobilization of indicator dyes. Further and more specific sections summarize the state of the art in materials with dual functionality (indicator and host), nanomaterials, sensors based on upconversion and 2-photon absorption, multiparameter sensors, imaging, and sensors for extreme pH values. A chapter on the many sensing formats has subsections on planar, fiber optic, evanescent wave, refractive index, surface plasmon resonance and holography based sensor designs, and on distributed sensing. Another section summarizes selected applications in areas, such as medicine, biology, oceanography, bioprocess monitoring, corrosion studies, on the use of pH sensors as transducers in biosensors and chemical sensors, and their integration into flow-injection analyzers, microfluidic devices, and lab-on-a-chip systems. An extra section is devoted to current challenges, with subsections on challenges of general nature and those of specific nature. A concluding section gives an outlook on potential future trends and perspectives.

Self-enhanced multicolor electrochemiluminescence by competitive electron-transfer processes

Controlling electrochemiluminescence (ECL) color(s) is crucial for many applications ranging from multiplexed bioassays to ECL microscopy. This can only be achieved through the fundamental understanding of high-energy electron-transfer processes in complex and competitive reaction schemes. Recently, this field has generated huge interest, but the effective implementation of multicolor ECL is constrained by the limited number of ECL-active organometallic dyes. Herein, the first self-enhanced organic ECL dye, a chiral red-emitting cationic diaza [4]helicene connected to a dimethylamino moiety by a short linker, is reported. This molecular system integrates bifunctional ECL features (i.e. luminophore and coreactant) and each function may be operated either separately or simultaneously. This unique level of control is enabled by integrating but decoupling both molecular functions in a single molecule. Through this dual molecular reactivity, concomitant multicolor ECL emission from red to blue with tunable intensity is readily obtained in aqueous media. This is done through competitive electron-transfer processes between the helicene and a ruthenium or iridium dye. The reported approach provides a general methodology to extend to other coreactant/luminophore systems, opening enticing perspectives for spectrally distinct detection of several analytes, and original analytical and imaging strategies.

Oxidation-Induced Differentially Selective Turn-On Fluorescence via Photoinduced Electron Transfer Based on a Ferrocene-Appended Coumarin-Quinoline Platform: Application in Cascaded Molecular Logic

Differentially selective molecular sensors that exhibit differential response toward multiple analytes are cost-effective and in high demand for various practical applications. A novel, highly differentially selective electrochemical and fluorescent chemosensor, 5, based on a ferrocene-appended coumarin-quinoline platform has been designed and synthesized. Our designed probe is very specific toward Fe³⁺ via a reversible redox process, whereas it detects Cu²⁺ via irreversible oxidation. Interestingly, it exhibits differential affinity toward the Cu⁺ ion via complexation. High-resolution mass spectrometry, ¹H NMR titration, and IR spectral studies revealed the formation of a bidentate Cu⁺ complex involving an O atom of the amide group attached to the quinoline ring and a N atom of imine unit, and this observation was further supported by quantum-chemical calculations. The metal binding responses were further investigated by UV-vis, fluorescence spectroscopy, and electrochemical analysis. Upon the addition of Fe³⁺ and Cu²⁺ ions, the fluorescence emission of probe 5 shows a "turn-on" signal due to inhibition of the photoinduced electron transfer (PET) process from a donor ferrocene unit to an excited-state fluorophore. The addition of sodium l-ascorbate (LAS) as a reducing agent causes fluorescence "turn off" for the Fe³⁺ ion because of reemergence of the PET process but not for the Cu²⁺ ion because it oxidizes the ferrocene unit to a ferrocenium ion with its concomitant reduction to Cu⁺, which further complexes with 5. Thermodynamic calculations using the Weller equation along with density functional theory calculations validate the feasibility of the PET process. A unique combination of Fe³⁺, LAS, and Cu²⁺ ions has been used to produce a molecular system demonstrating combinational "AND-OR" logic operation.

Photophysical and biological investigation of phenol substituted rhenium tetrazolato complexes

The synthesis, structural and photophysical characterisation of four tricarbonyl rhenium(i) complexes bound to 1,10-phenanthroline and a tetrazolato ancillary ligand are reported. The complexes are differentiated by the nature (hydroxy or methoxy) and position (meta or para) of the substituent attached to the phenyl ring in conjugation to the tetrazole ring. The complexes exhibit phosphorescence emission from triplet charge transfer excited states, with the maxima around 600 nm, excited state lifetime decays in the 200-300 ns range, and quantum yield values of 4-6% in degassed acetonitrile solutions. The nature and position of the substituent does not significantly affect the photophysical properties, which remain unchanged even after deprotonation of the hydroxide group on the phenol ring. The interpretation of the photophysical data was further validated by resonance Raman spectroscopy and time-dependent density functional theory calculations. All the complexes are internalised within cells, albeit to variable degrees. As highlighted by a combination of flow cytometry and confocal microscopy, the species display diffuse cytoplasmic localisation except for the complex with the hydroxy functional group at the para position, which reveals lower accumulation in cells and more pronounced punctate staining. Overall, the complexes displayed low levels of cytotoxicity.

Near-infrared fluorescent aza-BODIPY dyes for sensing and imaging of pH from the neutral to highly alkaline range

New aza-BODIPY pH indicators with spectral properties modulated solely by photoinduced electron transfer (PET) are presented. The pH sensitive hydroxyl group is located in the meta-position of a phenyl substituent with respect to the aza-BODIPY core, which eliminates the conjugation to the chromophore. The new dyes show reversible "on"-"off" fluorescence response upon deprotonation of the receptor but no changes in the absorption spectrum, which is in contrast to state-of-the-art indicators of the aza-BODIPY family. This eliminates potential changes in the efficiency of the inner filter effect and Förster resonance energy transfer (FRET) and makes the new dyes suitable acceptors in light harvesting systems used for ratiometric pH imaging. The introduction of electron-withdrawing or electron-donating groups into the receptor results in a set of indicators suitable for measurements from physiological (pH 7) to very alkaline (pH 13) conditions. The new sensors are particularly promising for monitoring of pH changes in concrete, as was recently shown elsewhere.

Background-Free Fluorescence-Decay-Time Sensing and Imaging of pH with Highly Photostable Diazaoxotriangulenium Dyes

Novel fluorescent diazaoxatriangulenium (DAOTA) pH indicators for lifetime-based self-referenced pH sensing are reported. The DAOTA dyes were decorated with phenolic-receptor groups inducing fluorescence quenching via a photoinduced-electron-transfer mechanism. Electron-withdrawing chlorine substituents ensure response in the most relevant pH range (apparent p K_a^' values of ∼5 and 7.5 for the p, p-dichlorophenol- and p-chlorophenol-substituted dyes, respectively). The dyes feature long fluorescence lifetimes (17-20 ns), high quantum yields (∼60%), and high photostabilities. Planar optodes are prepared upon immobilization of the dyes into polyurethane hydrogel D4. Apart from the response in the fluorescence intensity, the optodes show pH-dependent lifetime behavior, which makes them suitable for studying 2D pH distributions with the help of fluorescence-lifetime-imaging techniques. The lifetime response is particularly pronounced for the sensors with high dye concentrations (0.5-1 wt % with respect to the polymer) and is attributed to the efficient homo-FRET mechanism.

Recyclable Polymeric Thin Films for the Selective Detection and Separation of Picric Acid

Thin-film probes have been developed for the reversible detection and separation of picric acid (PA) with extreme sensitivity in aqueous media. The free radical copolymerization of dimethylacrylamide (DMA), benzophenone acrylamide (BPAM), and glycidyl methacrylate (GMA) with a feed ratio of 95:1:4 yielded [p(DMA- co-BPAM- co-GMA)] (P1). P1 was transformed to the final polymeric probe, P2, by a subsequent ring-opening reaction between N-(pyren-1-yl-methyl)propan-1-amine (Py-PA) with the epoxide unit of P1. P2 exhibited rapid and selective sensing properties toward PA in aqueous media via turn-off fluorescence emission. The detection sensitivity was tuned precisely by varying the pH of the solution. After the immobilization of P2 on a quartz slide by spin-coating, followed by exposure to UV light, the resulting film exhibited an attogram-level detection limit toward PA. The photoinduced electron transfer together with an energy-transfer process between PA and the pyrene units of P2 were maximized by the strong π-π stacking of pyrene units of P2, which, in turn, induced rapid exciton energy diffusion. Furthermore, the separation of PA from the mixture of the various nitroaromatic compounds by the P2 film was achieved. Whereas the detection process of PA was reversible and repeatable over multiple cycles, the P2 film could be recycled.

Design, Synthesis and Photochemical Properties of a Phenalenone-Based pH Sensor: Switchable pH Sensing in Four Detectable Channels

The synthesis and pH-sensing property of a novel phenalenone-based compound, 9-(4-hydroxyphenylamino)-1-oxo-phenalenone (HPAP), is reported. The newly synthesized compound is capable of functioning as a pH sensor in the region of pH 7 to 12. The sensor can be used as a colorimetric indicator in the transition from pH 10 to pH 11. The sensor is able to function in four detectable channels. All four channels (UV, emission, colorimetric/visible and photoluminescence) have been shown to be reversible, thus implying the reuse of this single-molecule sensor and indicator for several experiments. Mechanistic investigations have been performed by UV, NMR and DFT studies which indicate that a photoinduced electron transfer (PET) based mechanism could be operative. Straightforward and cost-effective application of the sensor in thin-layer chromatography has also been established.

Ultrabright Red-Emitting Photostable Perylene Bisimide Dyes: New Indicators for Ratiometric Sensing of High pH or Carbon Dioxide

New pH-sensitive perylene bisimide indicator dyes were synthesized and used for fabrication of optical sensors. The highly photostable dyes show absorption/emission bands in the red/near-infrared (NIR) region of the electromagnetic spectrum, high molar absorption coefficients (up to 100 000 m-1  cm-1 ), and fluorescence quantum yields close to unity. The absorption and emission spectra show strong bathochromic shifts upon deprotonation of the imidazole nitrogen atom, which makes the dyes promising as ratiometric fluorescent indicators. Physical entrapment of the indicators into a polyurethane hydrogel enables pH determination at alkaline pH values. It is also shown that a plastic carbon dioxide solid-state sensor can be manufactured by immobilization of the pH indicator in a hydrophilic polymer, along with a quaternary ammonium base. The influences of the plasticizer, different lipophilic bases, and humidity on the sensitivity of the sensor material are systematically investigated. The disubstituted perylene, particularly, features two deprotonation equilibria, enabling sensing over a very broad pCO2 range of 0.5 to 1000 hPa.

Fluorescence of Hydroxyphenyl-Substituted "Click" Triazoles

The structural and optical properties of hydroxyphenyl-substituted-1,2,3-triazole molecules ("click" triazoles) are described. "Click" triazoles are prepared from the copper(I)-catalyzed azide-alkyne cycloaddition reactions. The alkyne-derived C4 substituent of a "click" triazole engages in electronic conjugation more effectively with the triazolyl core than the azide-derived N1 substituent. Furthermore, triazolyl group exerts a stronger electron-withdrawing effect on the N1 than the C4 substituent. Therefore, the placement of an electron-donating group at either C4 or N1 position and the presence or the absence of an intramolecular hydrogen bond (HB) have profound influences on the optical properties of these compounds. The reported "click" triazoles have fluorescence quantum yields in the range of 0.1-0.3 and large apparent Stokes shifts (8000-13 000 cm^-1) in all tested solvents. Deprotonation of "click" triazoles with a C4 hydroxyphenyl group increases their Stokes shifts; while the opposite (or quenching) occurs to the triazoles with an N1 hydroxyphenyl substituent. For the triazoles that contain intramolecular HBs, neither experimental nor computational results support a model of excited state intramolecular proton transfer (ESIPT). Rather, the excited state internal (or intramolecular) charge transfer (ICT) mechanism is more suitable to explain the fluorescence properties of the hydroxyphenyl-substituted "click" triazoles; specifically, the large Stokes shifts of these compounds.

Novel fluorescent probes for the fluoride anion based on hydroxy-substituted perylene tetra-(alkoxycarbonyl) derivatives

The fluoride anion (F⁻) sensing abilities of 1-hydroxyl-3,4,9,10-tetra (n-butoxyloxycarbonyl) perylene (probe 1) and 1-hydroxyl-mono-five-membered S-heterocyclic annulated tetra (n-butoxyloxycarbonyl) perylene (probe 2) were studied through visual detection experiments, UV-Vis, fluorescence, and ¹H NMR titrations. The probes were sensitive and selective for distinguishing F⁻ from other anions (Cl⁻, Br⁻, I⁻, SO₄⁻, PF₆⁻, H₂PO₄⁻, BF₄⁻, ClO₄⁻, OH⁻, CH₃COO⁻, and HPO₄²⁻) through a change of UV-Vis and fluorescence spectra. The absorption and fluorescence emission properties of the probes arise from the intermolecular proton transfer (IPT) process between a hydrogen atom on the phenolic O position of probe and the F⁻ anion. The sensing mechanism was supported by theoretical investigation. Moreover, probe-based test strips can conveniently detect F⁻ without any additional equipment, and they can be used as fluorescent probes for monitoring F⁻ in living cells.

The fluoride anion (F⁻) sensing abilities of two fluorescent probes based on hydroxy-substituted perylene tetra-(alkoxycarbonyl) derivatives were studied through visual detection experiment, UV-Vis, fluorescence, and ¹H NMR titrations.

Carbon nano-onions as fluorescent on/off modulated nanoprobes for diagnostics

Multishell fullerenes, known as carbon nano-onions (CNOs), have emerged as a platform for bioimaging because of their cell-penetration properties and minimal systemic toxicity. Here, we describe the covalent functionalization of CNOs with a π-extended distyryl-substituted boron dipyrromethene (BODIPY) dye with on/off modulated fluorescence emission activated by an acidic environment. The switching properties are linked to the photoinduced electron transfer (PET) characteristics of the dimethylamino functionalities attached to the BODIPY core. The on/off emission of the fluorescent CNOs is fast and reversible both in solution and in vitro, making this nanomaterial suitable as pH-dependent probes for diagnostic applications.

Fluorescent PET probes based on perylene-3,4,9,10-tetracarboxylic tetraesters

We demonstrate that perylene tetraester-based fluorescent PET probes with aniline receptors attached at the bay-positions are superior pH-sensitive “light-up” probes, with high fluorescence quantum yields Φ_F and huge fluorescent enhancements.

Stable DNA Nanomachine Based on Duplex-Triplex Transition for Ratiometric Imaging Instantaneous pH Changes in Living Cells

DNA nanomachines are becoming useful tools for molecular recognition, imaging, and diagnostics and have drawn gradual attention. Unfortunately, the present application of most DNA nanomachines is limited in vitro, so expanding their application in organism has become a primary focus. Hence, a novel DNA nanomachine named t-switch, based on the DNA duplex-triplex transition, is developed for monitoring the intracellular pH gradient. Our strategy is based on the DNA triplex structure containing C(+)-G-C triplets and pH-dependent Förster resonance energy transfer (FRET). Our results indicate that the t-switch is an efficient reporter of pH from pH 5.3 to 6.0 with a fast response of a few seconds. Also the uptake of the t-switch is speedy. In order to protect the t-switch from enzymatic degradation, PEI is used for modification of our DNA nanomachine. At the same time, the dynamic range could be extended to pH 4.6-7.8. The successful application of this pH-depended DNA nanomachine and motoring spatiotemporal pH changes associated with endocytosis is strong evidence of the possibility of self-assembly DNA nanomachine for imaging, targeted therapies, and controllable drug delivery.

Current developments in fluorescent PET (photoinduced electron transfer) sensors and switches

A fluorophore can be combined with a receptor according to a molecular engineering design in order to yield fluorescent sensing and switching devices.