Isotopic separation of [(14)n]- and [(15)n]aniline by capillary electrophoresis using surfactant- controlled reversed electroosmotic flow

Zero net-flow in capillary electrophoresis using acrylamide based hydrogel

Zero net-flow was observed when acrylamide based hydrogel was used in a vial at one end of a fused-silica capillary during electrophoresis with electroosmotic flow.

Electrophoretic separations in poly(dimethylsiloxane) microchips using mixtures of ionic, nonionic and zwitterionic surfactants

The use of surfactant mixtures to affect both EOF and separation selectivity in electrophoresis with PDMS substrates is reported, and capacitively coupled contactless conductivity detection is introduced for EOF measurement on PDMS microchips. First, the EOF was measured for two nonionic surfactants (Tween 20 and Triton X-100), mixed ionic/nonionic surfactant systems (SDS/Tween 20 and SDS/Triton X-100), and finally for the first time, mixed zwitterionic/nonionic surfactant systems (TDAPS/Tween 20 and TDAPS/Triton X-100). EOF for the nonionic surfactants decreased with increasing surfactant concentration. The addition of SDS or TDAPS to a nonionic surfactant increased EOF. After establishing the EOF behavior, the separation of model catecholamines was explored to show the impact on separations. Similar analyte resolution with greater peak heights was achieved with mixed surfactant systems containing Tween 20 and TDAPS relative to the single surfactant system. Finally, the detection of catecholamine release from PC12 cells by stimulation with 80 mM K(+) was performed to demonstrate the usefulness of mixed surfactant systems to provide resolution of biological compounds in complex samples.

Control of electroosmotic flow by a cation additive to enhance the separation of amino acids by micellar electrokinetic chromatography

The effect of a divalent cation (Mg2+) and 3 monovalent cations (Na+, Li+, and K+) as buffer additives on the electroosmotic flow (EOF) was investigated in order to improve the separation performance of p-acetamidobenzenesulfonyl fluoride (PAABS-F) derivatives of 20 standard amino acids by micellar electrokinetic chromatography (MEKC). The EOF can be decreased with increasing concentration of cations with the order of cations as Mg2+>K+>Na+>Li+. However, it was found that the resolution cannot be improved easily using a buffer cation which is more capable of decreasing the EOF. Taking the migration time, resolution, and peak shape into account, Na+ is the best buffer additive, although the EOF decreased most using Mg2+. Using 20 mmol/L borate at pH 9.3 containing 140 mmol/L SDS and 20 mmol/L Na+ as electrolyte, 20 standard amino acids were successfully separated within 14 min.

Highly efficient protein separations in capillary electrophoresis using a supported bilayer/diblock copolymer coating

A surfactant/polymer wall coating consisting of the doubly chained cationic surfactant dimethyldioctadecylammonium bromide (DODAB) and polyoxyethylene (POE) 40 stearate is investigated. The coating is formed by simply rinsing a capillary with a solution containing DODAB and POE 40 stearate. The resultant coating is semi-permanent--demonstrating stable electroosmotic flow (EOF) even after a 60 min high pressure rinse with buffer. The EOF (-0.45+/-(0.23) x 10(-4) cm(2) V(-1) s(-1) at pH 7.4) is suppressed by more than a factor of ten compared to that observed for DODAB alone. Model protein mixtures were separated over a pH range of 3-10 with efficiencies of up to greater than 1 million plates/m for the basic proteins cytochrome c, lysozyme, ribonuclease A and alpha-lactalbumin, and the acidic proteins insulin chain A, trypsin inhibitor, and alpha-chymotrypsinogen A. Migration time reproducibility was 0.5-4.0% from run to run and 0.6-4.3% from day to day. Protein recoveries with this coating ranged from 84% to 97%.

Ion association with alkylammonium cations for separation of anions by capillary electrophoresis

A background electrolyte (BGE) containing a 100 mM concentration of an alkylammonium cation with ethyl, propyl or butyl groups provides an excellent medium for separation of anions by capillary electrophoresis (CE). Two major effects were noted. Use of one of a series of alkylammonium cations in the BGE at a selected pH provides a simple and effective way to vary and control electroosmotic flow (EOF) over a broad range. It is believed that the alkylammonium cations are coated onto the capillary surface through a reversible dynamic equilibrium. Secondly, alkylammonium cations modify the electrophoretic migration of sample anions and the electroosmotic migration of neutral organic analytes by association interaction. This selective interaction results in improved anion separations and permits the simultaneous separation of neutral analytes. The degree of association interaction varies with the bulk and hydrophobicity of the alkylammonium cations. Incorporation of an aliphatic amine salt of moderate molecular weight in the running electrolyte provides a valuable new way to vary the migration times of sample anions and to optimize their resolution. The interactions between alkylammonium cations and sample anions or neutral organics appear to take place entirely within the liquid phase and do not require a polymeric or micellar pseudo phase.

Mobility-based selective on-line preconcentration of proteins in capillary electrophoresis by controlling electroosmotic flow

A simple method to perform selective on-line preconcentration of protein samples in capillary electrophoresis (CE) is described. The selectivity, based on protein electrophoretic mobility, was achieved by controlling electroosmotic flow (EOF). A short section of dialysis hollow fiber, serving as a porous joint, was connected between two lengths of fused silica capillary. High voltage was applied separately to each capillary, and the EOF in the system was controlled independently of the local electric field intensity by controlling the total voltage drop. An equation relating the EOF with the total voltage drop was derived and evaluated experimentally. On-line preconcentration of both positively charged and negatively charged model proteins was demonstrated without using discontinuous background electrolytes, and protein analytes were concentrated by approximately 60-200-fold under various conditions. For positively charged proteins, positive voltages of the same magnitude were applied at the free ends of the connected capillaries while the porous joint was grounded. This provided a zero EOF in the system and a non-zero local electric field in each capillary to drive the positively charged analytes to the porous joint. CE separation was then initiated by switching the polarity of the high voltage over the second capillary. For negatively charged proteins, the procedure was the same except negative voltages were applied at the free ends of the capillaries. Mobility-based selective on-line preconcentration was also demonstrated with two negatively charged proteins, i.e. beta-lactoglobulin B and myoglobin. In this case, negative voltages of different values were applied at the free ends of the capillaries with different values, which provided a non-zero EOF in the system. The direction of EOF was the same as that of the electrophoretic migration velocities of the protein analytes in the first capillary and opposite in the second capillary. By controlling the EOF, beta-lactoglobulin B, which has a higher mobility, could be concentrated over 150-fold with a 15 min injection while myoglobin, which has a lower mobility, was eliminated from the system.

Use of ionic polymers as stationary and pseudo-stationary phases in the separation of ions by capillary electrophoresis and capillary electrochromatography

One of the problems with capillary electrophoresis is a lack of versatility regarding manipulation of the separation selectivity. A new and potentially universal concept is to introduce an ion-exchange component into a separation so that the migration of analyte ions is influenced by both their electrophoretic mobilities and their chromatographic properties. This may be accomplished by use of capillaries filled with or coated with solid ion-exchange polymers, or by addition of a soluble ionic polymer to the background electrolyte to create a pseudo-stationary phase. While each of these methods achieves the same result, they are not competitive, but rather complementary as the problems associated by one approach are overcome by the others. Recent highlights in the field are used to illustrate the flexibility that this approach provides to electrophoretic separation of ions.

Simultaneous control of electrostatic micellar partition and electroosmotic flow-rate by anion-dominated partition into zwitterionic micelles

The zeta potentials of zwitterionic micelles and capillary walls have been evaluated with capillary electrophoresis. The zeta potential of the micelles is predominantly determined by the nature of anions, while cations of identical valence have marginal effects; the linear relation has been found between the induced zeta potential and the hydration energy of an anion. The zeta potential of the capillary wall is also varied with anionic natures, and there is a good correlation between micellar and capillary wall zeta potential. This strongly suggests that the zeta potential of capillary walls is determined by the partition of anions into the surfactant layer formed on the capillary wall. Thus, we can simultaneously control both the electroosmotic flow-rate and micellar surface potential (in turn electrostatic interaction between micelles and ionic solutes) by varying the type and concentration of electrolytes. This idea has been applied to the separation of aromatic cationic solutes.

Recent developments in the separation of inorganic and small organic ions by capillary electrophoresis

Which method should I use for ion analysis, ion chromatography (IC) or capillary electrophoresis (CE)? In terms of actual theoretical plates CE has a clear-cut advantage. The separation ability of IC is adequate for many sample types, and many separation scientists feel that IC offers greater reliability and confidence than CE. However, IC is a more mature technique and there has been more time to solve problems such as peak tailing and to improve reproducibility. The two techniques should be viewed as complementary. A number of recent developments in ion analysis by CE are discussed. These include some simple ways to control electroosmotic flow and improve reproducibility, separation of isotopes, improved methods of indirect photometric detection, a new contactless conductivity detector, separation of ions at low pH, and in solutions of high salt content. Progress in a new technique called IC-CE will be described in which a soluble ion-exchange polymer is added to the capillary electrolyte to separate anions based on differences in both electrophoretic mobility and ion-exchange interactions.

Dual-opposite injection electrokinetic chromatography for the unbiased, simultaneous separation of cationic and anionic compounds

The concept of dual opposite injection in capillary electrophoresis (DOI-CE) for the simultaneous separation, under conditions of suppressed electroosmotic flow, of anionic and cationic compounds with no bias in resolution and analysis time, is extended to a higher pH range in a zone electrophoresis mode (DOI-CZE). A new DOI-CE separation mode based on electrokinetic chromatography is also introduced (DOI-EKC). Whereas conventional CZE and DOI-CZE are limited to the separation of charged compounds with different electrophoretic mobilities, DOI-EKC is shown to be capable of separating compounds with the same or similar electrophoretic mobilities. In contrast to conventional EKC with charged pseudostationary phases that often interact too strongly with analytes of opposite charge, the neutral pseudostationary phases appropriate for DOI-EKC are simultaneously compatible with anionic and cationic compounds. This work describes two buffer additives that dynamically suppress electroosmotic flow (EOF) at a higher pH (6.5) than in a previous study (4.4), thus allowing DOI-CZE of several pharmaceutical bases and weakly acidic positional isomers. Several DOI-EKC systems based on nonionic (10 lauryl ether, Brij 35) or zwitterionic (SB-12, CAS U) micelles, or nonionic vesicles (Brij 30) are examined using a six-component test mixture that is difficult to separate by CZE or DOI-CZE. The effect of electromigration dispersion on peak shape and efficiency, and the effect of surfactant concentration on retention, selectivity, and efficiency are described.

Simultaneous separation of cationic and anionic proteins using zwitterionic surfactants in capillary electrophoresis

The zwitterionic surfactant Rewoteric AM CAS U forms a dynamic wall coating that prevents the adsorption of cationic proteins as well as suppresses the electroosmotic flow (EOF). Addition of polarizable anions to buffers containing this zwitterionic surfactant increases the once suppressed EOF to values nearing +3 x 10(-4) cm2/(V s). The retention of the EOF allows for the separation of analytes of widely different mobilities and is demonstrated by the simultaneous separation of cationic and anionic proteins. Using a buffer containing optimal amounts of the polarizable anion perchlorate and surfactant CAS U, the proteins lysozyme, ribonuclease A, alpha-chymotrypsinogen A, and myoglobin are separated in less than 15 min. Efficiencies as high as 1.5 million plates/m and recoveries greater than 91% are observed for proteins injected in distilled water. Migration time reproducibility is approximately 1% RSD within 1 day and approximately 3% RSD from day to day. The anionic and cationic proteins can be separated over a pH range of 5.5-9, all yielding good efficiencies.

Ultrahigh-resolution capillary electrophoretic separation with indirect ultraviolet detection: isotopic separation of [14N]- and [15N]ammonium

Separation of isotopically labeled [14N]/[15N] ammonium was performed with capillary electrophoresis. This ultrahigh-resolution separation was based on mobility counterbalance with precise control of the anodic electroosmotic flow. Mixtures of zwitterionic surfactant (Rewoteric AM CAS U) and cationic surfactant (cetyltrimethylammonium bromide) were used as buffer additives to modify the electroosmotic mobility. Indirect ultraviolet detection was used with benzyltributylammonium as the buffer coion. Baseline-resolved peaks of [14N]- and [15N]ammonium were obtained within 11 min. The detection limit was 0.01 mM for both [14N]-and [15N]ammonium. Linear calibration in concentration was observed up to 1.0 mM for [15N]ammonium and 2.0 mM for [14N]ammonium. Calibration of the isotopic ratio, [15N]ammonium concentration to total ([14N] and [15N])ammonium, was valid from 5 to 95%.