Polymerization of Cyclopropenes: Taming the Strain for the Synthesis of Controlled and Sequence-Regulated Polymers

Designing Degradable Polymers from Tricycloalkenes via Complete Cascade Metathesis Polymerization

Cascade metathesis polymerization has been developed as a promising method to synthesize complex but well-defined polymers from monomers containing multiple reactive functional groups. However, this approach has been limited to the monomers involving simple alkene/alkyne moieties or produced mainly non-degradable polymers. In this study, we demonstrate a complete cascade ring-opening/ring-closing metathesis polymerization (RORCMP) using various tricycloalkenes and two strategies for the efficient degradation. Through rational design of tricycloalkene monomers, the structure and reactivity relationship was explored. For example, tricycloalkenes with trans configuration in the central ring enabled faster and better selective cascade RORCMP than the corresponding cis isomers. Also, a 4-substituted cyclopentene moiety in the monomers significantly enhanced the overall cascade RORCMP performance, with the maximum turnover number (TON) reaching almost 10,000 and molecular weight up to 170 kg/mol using an amide-containing monomer. Furthermore, we achieved one-shot cascade multiple olefin metathesis polymerization using tricycloalkenes and a diacrylate, to produce new highly A,B-alternating copolymers with full degradability. Lastly, we successfully designed xylose-based tricycloalkenes to give well-defined polymers that underwent ultra-fast and complete degradation under mild conditions.

Design of sec-Benzyl Vinyl Ethers toward the Synthesis of Alternating Copolymers Composed of Vinyl Alcohol and Vinyl Ether Units

In this work, we designed benzyl vinyl ethers carrying alkyl substituents at the benzyl position (i.e., sec-BnVEs) as bulky, reactive, and transformable monomers to realize the alternating cationic copolymerization with an alkyl vinyl ether (VE). In particular, the isopropyl substitution caused not only the bulkiness to suppress the successive propagation but also an enhancement of the vinyl group reactivity to promote crossover propagation with a less bulky VE comonomer. The isopropyl-substituted BnVE (iPr-BnVE) underwent living cationic alternating copolymerization with n-butyl VE (nBVE), and the alternating propagation was strongly suggested by the reactivity ratios. The subsequent deprotection of the sec-benzyl pendant afforded the vinyl alcohol (VA)-nBVE alternating copolymer, and the corresponding statistical copolymer was also synthesized by using the nonsubstituted monomer (BnVE) instead of iPr-BnVE. The alternating copolymer exhibited a higher glass transition temperature, which likely stems from the uniform and efficient hydrogen-bonding formation due to the periodic sequence.

Development of Highly Enantio- and Z-Selective Grubbs Catalysts via Controllable C-H Bond Activation

Asymmetric olefin metathesis is a powerful strategy for stereocontrolled synthesis that allows the formation of chiral elements in conjunction with carbon-carbon double bonds. Here, we report a new series of cyclometalated stereogenic-at-Ru catalysts that enable highly efficient asymmetric ring opening/cross-metathesis (AROCM) and asymmetric ring-closing metathesis (ARCM) reactions. Single enantiomers of these catalysts with either right-handed or left-handed configurations at the Ru center can be easily accessed via highly stereoselective C-H bond activation-based cyclometalation. Right-handed chiral Ru catalysts enabled the Z- and enantioselective AROCM of a wide range of norbornenes and terminal alkenes, generating densely functionalized cyclopentanes with excellent stereo- and enantioselectivities (99:1 Z/E, up to 99% ee). Left-handed chiral Ru catalysts enabled the facile ARCM of sterically unhindered, all-terminal prochiral trienes, which had not been achieved by previous Ru catalysts, providing simple cyclic ethers and amides with tertiary or quaternary carbon stereocenters with excellent enantioselectivities (up to 99% ee).

The Fluorocarbene Exploit: Enforcing Alternation in Ring-Opening Metathesis Polymerization

Fluoroalkenes are known to be notoriously reluctant substrates for olefin metathesis due to the generation of thermodynamically stable Fischer-type fluorocarbene intermediates, which invariably fail to undergo further reaction. In the present disclosure, we find that fluorine substitution on the sp² carbon also strictly suppresses homopolymerization of norbornene derivatives (NBEs), and this can be harnessed to achieve alternating ring-opening metathesis polymerization (ROMP) with an appropriately electron-rich comonomer. Dihydrofuran (DHF) is thereby shown to undergo alternating ROMP with fluorinated norbornenes, the perfectly alternating structure of the resulting copolymer having been unambiguously elucidated by ¹H, ¹⁹F, and ¹³C NMR analyses. Furthermore, we find that the degradability of the resultant copolymers in acidic media via hydrolysis of enol ether moieties in the backbone can be predictably modulated by the number of fluorine atoms present in the NBE comonomer, affording an opportunity to engage with the desirable physical properties of fluorinated polymers while limiting their attendant environmental degradability issues.

Practical Route for Catalytic Ring-Opening Metathesis Polymerization

Norbornene derivatives are typical monomers for ring-opening metathesis polymerization (ROMP) for synthesizing highly functional polymers. However, the lack of catalytic methods, that is, the lack of readily available chain transfer agents (CTAs) for these monomers has been a significant cost limitation when large-scale syntheses are required. Here, we report commercially available styrene and its derivatives as efficient regioselective CTAs for the catalytic synthesis of metathesis polymers requiring up to 1000 times less ruthenium than in classical ROMP experiments. The molecular weight of the synthesized polymers was controlled by the monomer-to-CTA ratio. Low molecular weight ROMP polymers known for their antimicrobial properties were also synthesized on a gram scale in this report. Polymers were characterized by SEC, ¹H NMR spectroscopy, and isotopically resolved MALDI-TOF MS. This approach describes a greener, more cost-effective, and eco-friendly methodology for the preparation of metathesis-based materials on the multigram scale.

Metal-Free Ring-Opening Metathesis Polymerization with Hydrazonium Initiators

The ring-opening metathesis polymerization (ROMP) of cyclopropenes using hydrazonium initiators is described. The initiators, which are formed by the condensation of 2,3-diazabicyclo[2.2.2]octane and an aldehyde, polymerize cyclopropene monomers by a sequence of [3+2] cycloaddition and cycloreversion reactions. This process generates short chain polyolefins (M_n ≤9.4 kg mol^-1 ) with relatively low dispersities (Đ≤1.4). The optimized conditions showed efficiency comparable to that achieved with Grubbs' 2^nd generation catalyst for the polymerization of 3-methyl-3-phenylcyclopropene. A positive correlation between monomer to initiator ratio and degree of polymerization was revealed through NMR spectroscopy.

Visible-Light-Induced Organocatalyzed [2+1] Cyclization of Alkynes and Trifluoroacetylsilanes

The synthesis of common cyclopropenes has been widely studied, but the synthesis of cyclopropenols is a significant challenge. Herein, we highlight our recent work on the synthesis of trifluoromethylated cyclopropenols through [2+1] cycloaddition reaction between alkynes and trifluoroacetylsilanes under visible-light-induced organocatalysis. The novel amphiphilic donor-acceptor carbenes derived from trifluoroacetylsilanes can react effectively with both activated and unactivated alkynes. Broad substrate scope and good functional group tolerance have been achieved. Besides, the synthetic potential of this reaction was highlighted by a gram-scale reaction and the one-pot diastereoselective synthesis of trifluoromethylated cyclopropanols.

Allosteric Binding-Induced Intramolecular Mechanical-Strain Engineering

Recently, polymer mechanochemistry has attracted much scientific interest due to its potential to develop degradable polymers. When the two ends of a polymer chain experience a linear pulling stress, molecular strain builds up, at sufficiently strong force, a bond scission of the weakest covalent bond results. In contrast, bond-breaking events triggered by conformational stress are much less explored. Here, we discovered that a Zn salen complex would undergo conformational switching upon allosteric complexation with alkanediammonium guests. By controlling the guest chain length, the torsional strain experienced by Zn complex can be modulated to induce bond cleavage with chemical stimulus, and reactivity trend is predicted by conformational analysis derived by DFT calculation. Such strain-release reactivity by a Zn(salen) complex initiated by guest binding is reminiscent of conformation-induced reactivity of enzymes to enable chemical events that are otherwise inhibited.

Synthesis of Cyclopropenols Enabled by Visible-Light-Induced Organocatalyzed [2+1] Cyclization

Although the synthesis of common cyclopropenes has been well studied, the access to cyclopropenols is rather limited. Herein, we report the first synthesis of α-trifluoromethylated cyclopropenols via 2+1 cycloaddition reactions between alkynes and trifluoroacylsilanes, enabled by visible-light-induced organocatalysis. The novel ambiphilic donor-acceptor carbenes derived from trifluoroacetylsilanes reacted efficiently with both activated and non-activated alkynes. The reaction features simple operation, mild conditions, broad substrate scope and good functional group tolerance. The synthetic potential of the reaction is highlighted by the gram-scale reactions and first synthesis of α-trifluoromethylated cyclopropanols through the combination of the 2+1 cyclization and high diastereoselective hydrogenation reaction in one pot.

Closing the "One Monomer-Two Polymers-One Monomer" Loop via Orthogonal (De)polymerization of a Lactone/Olefin Hybrid

Two well-known low-ceiling-temperature (LCT) monomers, γ-butyrolactone (γ-BL) toward ring-opening polymerization (ROP) to polyester and cyclohexene toward ring-opening metathesis polymerization (ROMP) to poly(cyclic olefin), are notoriously "nonpolymerizable". Here we present a strategy to render not only polymerizability of both the γ-BL and cyclohexene sites, orthogonally, but also complete and orthogonal depolymerization, through creating an LCT/LCT hybrid, bicyclic lactone/olefin (BiL⁼). This hybrid monomer undergoes orthogonal polymerization between ROP and ROMP, depending on the catalyst employed, affording two totally different classes of polymeric materials from this single monomer: polyester P(BiL⁼)_ROP via ROP and functionalized poly(cyclic olefin) P(BiL⁼)_ROMP via ROMP. Intriguingly, both P(BiL⁼)_ROP and P(BiL⁼)_ROMP are thermally robust but chemically recyclable under mild conditions (25-40 °C), in the presence of a catalyst, to recover cleanly the same monomer via chain unzipping and scission, respectively. In the ROP, topological and stereochemical controls have been achieved and the structures characterized. Furthermore, the intact functional group during the orthogonal polymerization (i.e., the double bond in ROP and the lactone in ROMP) is utilized for postfunctionalization for tuning materials' thermal and mechanical performances. The impressive depolymerization orthogonality further endows selective depolymerization of both the ROP/ROMP copolymer and the physical blend composites into the same starting monomer.

A Fischer-Type Ruthenium Carbene Complex as a Metathesis Catalyst for the Synthesis of Enol Ethers

The Grubbs G-I or G-II catalyst gives the ruthenium ethoxy carbene complex, which catalyzes ring-opening cross metathesis (ROCM) of a strained cyclic alkene to give a diene where one of the two alkene moieties in the product contains an ethoxy substituent. No polymeric products are detected. Hydrocarbons such as parent norbornene or substituted cyclopropenes can proceed with the reaction smoothly. Tertiary amines, N-alkylimides, esters, and aryl or alkyl bromides remain intact under the reaction conditions. In addition to vinyl ethers, vinylic esters can also be used. The time required to reach a 50% yield of the ROCM product t₅₀ varies from 0.01 to 140 h depending on the strain and nucleophilicity of the double bond. Anchimeric participation of an electron-rich group would result in significant enhancement of the reactivity, and the t₅₀ could be as short as several minutes. A similar substrate without such a neighboring group shows a much slower rate. An exo-norborne derivative reacts much faster than the corresponding endo-isomer. Alkenes with poor nucleophilicity are less favored for the ROCM process, so is less strained cyclooctene.

Palladium-Catalyzed Living/Controlled Vinyl Addition Polymerization of Cyclopropenes

Despite the various utilities of cyclopropenes (CPEs) in organic synthesis and ring-opening metathesis polymerization (ROMP), their vinyl addition polymerization has been sporadically explored, and the corresponding living/controlled polymerization remains a formidable challenge. The major obstacle is the intrinsic instability of the intermediate and the kinetic barrier for propagation. Herein a living/controlled vinyl addition polymerization of 3-methyl-3-carboxymethyl CPEs, catalyzed by [Pd(π-allyl)Cl]₂ ligated by a sulfinamide bisphosphine ligand, is demonstrated. A plot of the number-average molecular weight (M_n) versus the conversion was found to be linear during the polymerization, with the molecular weight dispersity (M_w/M_n) remaining narrow. The M_n values increased linearly with the increase in the initial feed ratio of monomer to catalyst. Furthermore, controlled block copolymerization via sequential monomer addition was successful. All of these points corroborate the living nature of this polymerization. The synergistic coordination action of the catalyst ligand and the lateral carbonyl group in the cyclopropene moiety plays a key role in achieving the efficient polymerization in a living/controlled manner.

Substituent Effects Provide Access to Tetrasubstituted Ring-Opening Olefin Metathesis of Bicyclo[4.2.0]oct-6-enes

Herein, we report the origin of unexpected reactivity of bicyclo[4.2.0]oct-6-ene substrates containing an α,β-unsaturated amide moiety in ruthenium-catalyzed alternating ring-opening metathesis polymerization reactions. Specifically, compared with control substrates bearing an ester, alkyl ketone, nitrile, or tertiary amide substituent, α,β-unsaturated substrates with a weakly acidic proton showed increased rates of ring-opening metathesis mediated by Grubbs-type ruthenium catalysts. ¹H NMR and IR spectral analyses indicated that deprotonation of the α,β-unsaturated amide substrates resulted in stronger coordination of the carbonyl group to the ruthenium metal center. Principal component analysis identified ring strain and the electron density on the carbonyl oxygen (based on structures optimized by means of ωB97X-D/6311+G(2df,2p) calculations) as the two key contributors to fast ring-opening metathesis of the bicyclo[4.2.0]oct-6-enes; whereas the dipole moment, conjugation, and energy of the highest occupied molecular orbital had little to no effect on the reaction rate. We conclude that alternating ring-opening metathesis polymerization reactions of bicyclo[4.2.0]oct-6-enes with unstrained cycloalkenes require an ionizable proton for efficient generation of alternating polymers.