Precision Synthesis of Alternating Copolymers via Ring-Opening Polymerization of 1-Substituted Cyclobutenes

Degradable Alternating Copolymers from Living Radical Copolymerization of Natural Levoglucosenone and Dienes

Here, we present an efficient synthetic route to biobased alternating copolymers via the living radical copolymerization of naturally occurring levoglucosenone (LGO) and dienes. By employing reversible addition-fragmentation chain transfer (RAFT) polymerization, well-defined LGO-derived copolymers were readily synthesized featuring high degrees of alternation, well-controlled molecular weights, and excellent end-group fidelity. Additionally, the alternating copolymers exhibited thermal and mechanical properties comparable to those of the commodity polystyrene. Furthermore, an on-demand metathesis degradation was identified, highlighting their potential as degradable materials.

Synthesis of Alternating Copolymers with Substituents Containing Heteroatoms and the Regulation of Nontraditional Intrinsic Luminescence

Compared with other sequence structure polymers, alternating polymers usually have several unique properties, but their properties are more sensitive to changes in structure. By investigating the relationship between the structure and properties of alternating polymer chains, polymers with desired properties can likely be synthesized. In this study, a series of alternating copolymers of 1,1-diphenylethylene (DPE) derivatives and styrene derivatives, which exhibit nontraditional intrinsic luminescence (NTIL), are synthesized using living anionic polymerization. By changing the bridge plane structure of the DPE derivatives and the substituent groups of the styrene derivatives, the rigid chain structure of the alternating copolymers containing styrene derivative with a large steric hindrance is altered, and this change is observed by the altered fluorescence properties. Based on the results from experimental tests and theoretical simulations, copolymers with bridge plane structures have higher fluorescence emission intensities; moreover, a balance is observed between the electronic and steric hindrance effects of substituents on the fluorescence intensities, and polymer chains that are too rigid cause a decrease in the fluorescence intensities. Thus, the influence of the chain structure on the fluorescence properties of NTIL polymers cannot be disregarded.

Design of sec-Benzyl Vinyl Ethers toward the Synthesis of Alternating Copolymers Composed of Vinyl Alcohol and Vinyl Ether Units

In this work, we designed benzyl vinyl ethers carrying alkyl substituents at the benzyl position (i.e., sec-BnVEs) as bulky, reactive, and transformable monomers to realize the alternating cationic copolymerization with an alkyl vinyl ether (VE). In particular, the isopropyl substitution caused not only the bulkiness to suppress the successive propagation but also an enhancement of the vinyl group reactivity to promote crossover propagation with a less bulky VE comonomer. The isopropyl-substituted BnVE (iPr-BnVE) underwent living cationic alternating copolymerization with n-butyl VE (nBVE), and the alternating propagation was strongly suggested by the reactivity ratios. The subsequent deprotection of the sec-benzyl pendant afforded the vinyl alcohol (VA)-nBVE alternating copolymer, and the corresponding statistical copolymer was also synthesized by using the nonsubstituted monomer (BnVE) instead of iPr-BnVE. The alternating copolymer exhibited a higher glass transition temperature, which likely stems from the uniform and efficient hydrogen-bonding formation due to the periodic sequence.

A General Strategy To Access Alternating Styrene/Substituted Styrene Copolymers by Using a Traceless Controlling Group

We herein report a synthetic strategy for alternating copolymers of styrene and substituted styrenes by utilizing α-styryl boronate pinacol ester (StBpin) as the co-monomer through radical alternating copolymerization followed by protodeboronation. The excellent alternating polymerization behavior of the StBpin co-monomer in such a radical polymerization system is considered to be attributed to the steric hindrance and radical stabilization exerted by the Bpin group. This strategy is effective with a wide range of substituted styrene co-monomers regardless of the electronic nature of the substituents, and the protodeboronation of the alternating Bpin-containing polymers is highly efficient without polymer backbone alternation. RAFT living polymerization was also compatible with this approach. Thus, this strategy provides a way to build-up alternating copolymers consisting of similar styrene-type co-monomers, which has been inaccessible by conventional synthetic methods.

The Fluorocarbene Exploit: Enforcing Alternation in Ring-Opening Metathesis Polymerization

Fluoroalkenes are known to be notoriously reluctant substrates for olefin metathesis due to the generation of thermodynamically stable Fischer-type fluorocarbene intermediates, which invariably fail to undergo further reaction. In the present disclosure, we find that fluorine substitution on the sp² carbon also strictly suppresses homopolymerization of norbornene derivatives (NBEs), and this can be harnessed to achieve alternating ring-opening metathesis polymerization (ROMP) with an appropriately electron-rich comonomer. Dihydrofuran (DHF) is thereby shown to undergo alternating ROMP with fluorinated norbornenes, the perfectly alternating structure of the resulting copolymer having been unambiguously elucidated by ¹H, ¹⁹F, and ¹³C NMR analyses. Furthermore, we find that the degradability of the resultant copolymers in acidic media via hydrolysis of enol ether moieties in the backbone can be predictably modulated by the number of fluorine atoms present in the NBE comonomer, affording an opportunity to engage with the desirable physical properties of fluorinated polymers while limiting their attendant environmental degradability issues.

Controlled Alternating Metathesis Copolymerization of Terminal Alkynes

Terminal alkynes display high reactivity toward Ru-carbene metathesis catalysts. However, the formation of a less reactive bulky carbene hinders their homopolymerization. Simultaneously, the higher reactivity of alkynes does not allow efficient cross propagation with sterically less-hindered cycloalkene monomers, resulting in inefficient copolymerization. Nonetheless, terminal alkynes undergo rapid cross-metathesis with vinyl ethers. Therefore, an efficient cross propagation can be achieved with terminal alkynes and cyclic enol ether monomers. Here, we show that terminal alkyne derivatives can be copolymerized in an alternating fashion with 2,3-dihydrofuran using Grubbs' third generation catalyst (G3). A linear relationship of the number-average molecular weight versus monomer to initiator ratio and block copolymer synthesis confirmed a controlled copolymerization. The SEC and NMR analyses of the synthesized copolymers confirmed the excellent control over molecular weight and exclusive alternating nature of the copolymer. The regioselective chain transfer of G3 to vinyl ether and the high reactivity of the Fischer-type Ru carbene toward terminal alkynes was also exploited for polymer conjugation. Finally, the presence of an acid labile backbone functionality in the synthesized alternating copolymers allowed complete degradation of the copolymer within a short time interval which was confirmed by SEC analyses.

Cascade Alternating Metathesis Cyclopolymerization of Diynes and Dihydrofuran

Ruthenium alkoxymethylidene complexes have recently come into view as competent species for metathesis copolymerization reactions when coupled with appropriate comonomer targets. Here, we explore the ability of Fischer-type carbenes to participate in cascade alternating metathesis cyclopolymerization (CAMC) through facile terminal alkyne addition. The combination of diyne monomers and an equal feed ratio of low-strain dihydrofuran leads to a controlled chain-growth copolymerization with high degrees of alternation (>97% alternating diads) and produces degradable polymer materials with low dispersities and targetable molecular weights. When combined with enyne monomers, this method is amenable to the synthesis of alternating diblock copolymers that can be fully degraded to short oligomer fragments under aqueous acidic conditions. This work furthers the potential for the generation of functional metathesis materials via Fischer-type ruthenium alkylidenes.

Sidechain Metallopolymers with Precisely Controlled Structures: Synthesis and Application in Catalysis

Inspired by the cooperative multi-metallic activation in metalloenzyme catalysis, artificial enzymes as multi-metallic catalysts have been developed for improved kinetics and higher selectivity. Previous models about multi-metallic catalysts, such as cross-linked polymer-supported catalysts, failed to precisely control the number and location of their active sites, leading to low activity and selectivity. In recent years, metallopolymers with metals in the sidechain, also named as sidechain metallopolymers (SMPs), have attracted much attention because of their combination of the catalytic, magnetic, and electronic properties of metals with desirable mechanical and processing properties of polymeric backbones. Living and controlled polymerization techniques provide access to SMPs with precisely controlled structures, for example, controlled degree of polymerization (DP) and molecular weight dispersity (Đ), which may have excellent performance as multi-metallic catalysts in a variety of catalytic reactions. This review will cover the recent advances about SMPs, especially on their synthesis and application in catalysis. These tailor-made SMPs with metallic catalytic centers can precisely control the number and location of their active sites, exhibiting high catalytic efficiency.

Ruthenium-Catalyzed Diazoacetates/Cyclooctene Metathesis Copolymerization

As a powerful synthetic tool, ruthenium-catalyzed ring-opening metathesis polymerization (ROMP) has been widely utilized to prepare diverse polymers. In this contribution, we demonstrated the polymerization of cyclooctene in the presence...

Oxanorbornenes: promising new single addition monomers for the metathesis polymerization

Higher ring-opening metathesis propagation rates of exo-norbornene derivatives over endo derivatives are well established in the literature. Here, we report for the first time that endo-isomers of oxanorbornene derivatives show higher reactivity towards ring-opening metathesis with Grubbs' 3rd generation catalyst (G3) than the corresponding exo-isomers. A very high selectivity for the reaction of G3 with endo over the exo-isomers could be shown. Furthermore, single molecular addition of the endo-isomers with G3 was observed. On the other hand, pure exo-monomers could successfully be homopolymerized. Mixtures of exo- and endo- monomers, however, prevented the homopolymerization of the exo-monomer. Such mixtures could successfully be copolymerized with cycloalkenes, resulting in alternating copolymers. An oxanorbornadiene derivative could be shown to undergo single addition reactions, exploited in the preparation of mono-end functional ROMP polymers. These could be selectively derivatized via endgroup selective thiol-ene click reactions. A thiol and alcohol end functional ROMP polymer was synthesized, and the efficient end functionalization was confirmed by 1H NMR spectroscopy and MALDI-ToF spectrometry.

Controlled Cyclopolymerization of 1,5-Hexadiynes to Give Narrow Band Gap Conjugated Polyacetylenes Containing Highly Strained Cyclobutenes

For decades, cyclopolymerization of α,ω-diyne derivatives has been an effective method to synthesize various soluble polyacetylenes containing five- to seven-membered rings in the backbone. However, cyclopolymerization to form four-membered carbocycles was considered impossible due to their exceptionally high ring strain (∼30 kcal/mol). Herein, we demonstrate the successful cyclopolymerization of rationally designed 1,5-hexadiyne derivatives to afford various polyacetylenes containing highly strained cyclobutenes in each repeat unit. After screening, Ru catalysts containing bulky diisopropylphenyl groups promoted challenging four-membered ring cyclization efficiently from various monomers, enabling the synthesis of high molecular weight (up to 40 kDa) polyacetylenes in a controlled manner. Furthermore, living polymerization allowed for block copolymer synthesis by combining with ring-opening metathesis polymerization as well as block copolymerization of two different 1,5-hexadiyne monomers to give a fully conjugated polyacetylene. These new polymers unexpectedly showed much narrower band gaps than conventional substituted polyacetylenes by >0.2 eV. Interestingly, computational studies showed much smaller bond length alternation in the conjugated backbone containing cyclobutenes, resulting in highly delocalized π electrons along the polymer chain and lower band gaps.

Electronically Governed ROMP: Expanding Sequence Control for Donor–Acceptor Conjugated Polymers

Controlling the primary sequence of synthetic polymers remains a grand challenge in chemistry. A variety of methods that exert control over monomer sequence have been realized wherein differential reactivity, pre-organization, and stimuli-response have been key factors in programming sequence. Whereas much has been established in nonconjugated systems, π-extended frameworks remain systems wherein subtle structural changes influence bulk properties. The recent introduction of electronically biased ring-opening metathesis polymerization (ROMP) extends the repertoire of feasible approaches to prescribe donor–acceptor sequences in conjugated polymers, by enabling a system to achieve both low dispersity and controlled polymer sequences. Herein, we discuss recent advances in obtaining well-defined (i.e., low dispersity) polymers featuring donor–acceptor sequence control, and present our design of an electronically ambiguous (4-methoxy-1-(2-ethylhexyloxy) and benzothiadiazole-(donor–acceptor-)based [2.2]paracyclophanediene monomer that undergoes electronically dictated ROMP. The resultant donor–acceptor polymers were well-defined (Đ = 1.2, Mn > 20 k) and exhibited lower energy excitation and emission in comparison to ‘sequence-ill-defined’ polymers. Electronically driven ROMP expands on prior synthetic methods to attain sequence control, while providing a promising platform for further interrogation of polymer sequence and resultant properties.

1 Introduction to Sequence Control

2 Sequence Control in Polymers

3 Multistep-Synthesis-Driven Sequence Control

4 Catalyst-Dictated Sequence Control

5 Electronically Governed Sequence Control

6 Conclusions

Sequence-Controlled Synthesis of Advanced Clickable Synthetic Oligonucleotides

Through thiol-ene photopolymerization of presynthesized oligomers, advanced clickable nucleic acids (CNA-2G) are synthesized with sequence-controlled repeating units. As examples, poly(thymine-adenine) (polyTA) CNA-2G and poly(thymine-thymine-cytosine) CNA-2G are synthesized by polymerizing thiol-ene heterofunctional dimers with pendant thymine-adenine nucleobases and trimer with pendant thymine-thymine-cytosine nucleobases. Based on size exclusion chromatography (SEC) analysis, polyTA and polyTTC have number average molecular weights of 2000 and 1800, respectively, which contain 7-8 pendant nucleobases. Based on the different behavior of the CNA-2G monomers and CNA-2G oligomers with two or more pendant nucleobases in photopolymerization, an unusual thiol-ene chain-growth propagation mechanism is observed for the former and a common thiol-ene step-growth propagation mechanism for the latter. The uncommon thiol-ene chain-growth propagation is hypothesized to rely on a six-membered ring mediated intramolecular hydrogen atom transfer process.

Alternating Cascade Metathesis Polymerization of Enynes and Cyclic Enol Ethers with Active Ruthenium Fischer Carbenes

Ruthenium alkoxymethylidene complexes have rarely been demonstrated as active species in metathesis reactions and are frequently regarded as inert. Herein, we highlight the ability of these Fischer-type carbenes to participate in cascade alternating ring-opening metathesis polymerization through their efficient alkyne addition reactions. When enyne monomers are combined with low-strain cyclic vinyl ethers, a controlled chain-growth copolymerization occurs that exhibits high degrees of alternation (>90% alternating diads) and produces degradable poly(vinyl ether) materials with low dispersities and targetable molecular weights. This new method is amenable to the synthesis of alternating diblock polymers that can be degraded to small-molecule fragments under aqueous acidic conditions. This work furthers the potential of Fischer-type ruthenium alkylidenes in polymerization strategies and presents new avenues for the generation of functional metathesis materials.

Degradable Polyacetals/Ketals from Alternating Ring-Opening Metathesis Polymerization

We report the synthesis of degradable polyacetals and polyketals with controlled molecular weights and low dispersities using alternating ring-opening metathesis polymerization (AROMP) of 1,1-disubstituted cyclopropenes and dioxepins. Under optimized conditions, high degrees of alternation and controlled polymerization were achieved between nonpropagating cyclopropenes and low-strain dioxepins. The high degrees of alternation allowed the resulting polymers to fully degrade into small molecules under acidic conditions at variable rates depending on the acetal/ketal structures. This synthetic strategy illustrates the use of AROMP to incorporate functionalities into both the polymer backbone as well as the side chains.

Saccharin-pendant methacrylamide as a unique monomer in radical copolymerization: peculiar alternating copolymerization with styrene

A saccharin metharylamide was found to uniquely induce alternating copolymerization with styrene.

AB-alternating copolymers via chain-growth polymerization: synthesis, characterization, self-assembly, and functions

In this review, four topics on alternating copolymers synthesized via chain-growth polymerization are reviewed: (1) how to control the alternating sequence; (2) sequence analysis; (3) self-assembly; and (4) functions.

Tuning the Reactivity of Cyclopropenes from Living Ring-Opening Metathesis Polymerization (ROMP) to Single-Addition and Alternating ROMP

Ring-opening metathesis polymerization (ROMP) has become one of the most important living polymerizations. Cyclopropenes (CPEs) remain underexplored for ROMP. Described here is that the simple swap of 1-methyl to 1-phenyl on 1-(benzoyloxymethyl)CPEs elicited strikingly different modes of reactivity, switching from living polymerization to either selective single-addition or living alternating ROMP. The distinct reactivity stems from differences in steric repulsions at the Ru alkylidene after CPE ring opening. Possible olefin or oxygen chelation from ring-opened CPE substituents was also observed to significantly affect the rate of propagation. These results demonstrate the versatility of CPEs as a new class of monomers for ROMP, provide mechanistic insights for designing new monomers with rare single-addition reactivity, and generate a new functionalizable alternating copolymer scaffold with controlled molecular weight and low dispersity.

Orthogonal functionalization of alternating polyesters: selective patterning of (AB) n sequences

Precision functionalized polyesters, with defined monomer sequences, are prepared using an orthogonal post-polymerization strategy. These polyesters can be synthesized from bio-derived monomers and are targeted to degrade, by hydrolysis processes, to biocompatible diols and diacids; the new structures enabled by this methodology would be very difficult to synthesize by alternative strategies. A series of 9 well-defined highly alternating AB-type copolyesters, containing terminal and internal alkene functionalities, are synthesized in high conversions by the ring-opening copolymerization of epoxides and cyclic anhydrides. Firstly, the polyesters are functionalized by a selective hydroboration-oxidation reaction to exclusively and quantitatively hydroxylate the terminal alkenes, leaving the alternating internal alkenes unreacted. Subsequently, the internal alkenes are quantitatively transformed into carboxylic acid, amine, alkyl and oligo-ether groups, by thiol-ene reactions, to afford AB polyesters with alternating functional substituents. Three polyesters showing alternating hydrophilic/hydrophobic side-chain sequences self-assemble in solution to form nanostructures that are characterized using transmission electron microscopy and dynamic light scattering methods (R h = 100-300 nm). The selective patterning methodology provides facile, efficient and orthogonal functionalization of alternating polyesters with near-quantitative (AB) n repeat sequences. The method is expected to be generalizable to other polymers and provides access to completely new AB alternating structures with the potential to exploit ligand multi-valency and adjacency to enhance properties.

Telechelics Based on Catalytic Alternating Ring-Opening Metathesis Polymerization

We describe a protocol to synthesize alternating telechelic ROMP copolymers of 7-oxa-norbornene derivatives and cycloalkenes under catalytic conditions. These copolymers were synthesized using Grubbs' second-generation catalyst. The sterically less hindered backbone double bonds of the resulting alternating copolymers facilitate the chain transfer (secondary metathesis) reactions. In the presence of symmetrical chain transfer agents (CTA), alternating copolymers could be synthesized catalytically. This procedure allows the synthesis of telechelic polymers based on potentially functional 7-oxa-norbornene derivatives under thermodynamic equilibrium conditions. The molar mass of the alternating copolymer was controlled by the monomer to CTA ratio. The end group of the copolymers synthesized in the catalytic manner was addressed by the CTA functionality, yielding telechelic copolymers in excellent yields. ¹H NMR spectroscopy, MALDI-ToF mass spectrometry, and SEC analysis confirmed the chemical identity of the alternating telechelic copolymers with excellent control over the molar mass.

Sequence-Controlled Polymers Through Entropy-Driven Ring-Opening Metathesis Polymerization: Theory, Molecular Weight Control, and Monomer Design

The bulk properties of a copolymer are directly affected by monomer sequence, yet efficient, scalable, and controllable syntheses of sequenced copolymers remain a defining challenge in polymer science. We have previously demonstrated, using polymers prepared by a step-growth synthesis, that hydrolytic degradation of poly(lactic- co-glycolic acid)s is dramatically affected by sequence. While much was learned, the step-growth mechanism gave no molecular weight control, unpredictable yields, and meager scalability. Herein, we describe the synthesis of closely related sequenced polyesters prepared by entropy-driven ring-opening metathesis polymerization (ED-ROMP) of strainless macromonomers with imbedded monomer sequences of lactic, glycolic, 6-hydroxy hexanoic, and syringic acids. The incorporation of ethylene glycol and metathesis linkers facilitated synthesis and provided the olefin functionality needed for ED-ROMP. Ring-closing to prepare the cyclic macromonomers was demonstrated using both ring-closing metathesis and macrolactonization reactions. Polymerization produced macromolecules with controlled molecular weights on a multigram scale. To further enhance molecular weight control, the macromonomers were prepared with cis-olefins in the metathesis-active segment. Under these selectivity-enhanced (SEED-ROMP) conditions, first-order kinetics and narrow dispersities were observed and the effect of catalyst initiation rate on the polymerization was investigated. Enhanced living character was further demonstrated through the preparation of block copolymers. Computational analysis suggested that the enhanced polymerization kinetics were due to the cis-macrocyclic olefin being less flexible and having a larger population of metathesis-reactive conformers. Although used for polyesters in this investigation, SEED-ROMP represents a general method for incorporation of sequenced segments into molecular weight-controlled polymers.

Selective ring-opening metathesis polymerization (ROMP) of cyclobutenes. Unsymmetrical ladderphane containing polycyclobutene and polynorbornene strands

At 0 °C in THF in the presence of Grubbs first generation catalyst, cyclobutene derivatives undergo ROMP readily, whereas norbornene derivatives remain intact. When the substrate contains both cyclobutene and norbornene moieties, the conditions using THF as the solvent at 0 °C offer a useful protocol for the selective ROMP of cyclobutene to give norbornene-appended polycyclobutene. Unsymmetrical ladderphane having polycyclobutene and polynorbornene as two strands is obtained by further ROMP of the norbornene appended polycyclobutene in the presence of Grubbs first generation catalyst in DCM at ambient temperature. Methanolysis of this unsymmetrical ladderphane gives polycyclobutene methyl ester and insoluble polynorbornene-amide-alcohol. The latter is converted into the corresponding soluble acetate. Both polymers are well characterized by spectroscopic means. No norbornene moiety is found to be incorporated into polycyclobutene strand at all. The double bonds in the polycyclobutene strand are mainly in cis configuration (ca 70%), whereas the E/Z ratio for polynorbornene strand is 8:1.

Polypentenamer Renaissance: Challenges and Opportunities

This Viewpoint highlights the viability and increasing variety of functionalized polypentenamers as unique and valuable materials created through enthalpy-driven ring-opening metathesis polymerization (ROMP) of low ring strain cyclopentene monomers. The terms "low ring strain" and "enthalpy-driven" are typically conflicting ideologies for successful ROMP; however, these monomers possess a heightened sensitivity to reaction conditions, which may be leveraged in a number of ways to provide performance elastomers with good yield and precise functional topologies. Over the last several years, a rekindled interest in these systems has led to a renaissance of research aimed at improving their synthesis and exploring their potential. Their chemistry, applications, and future outlook are discussed.

Incorporation of Large Cycloalkene Rings into Alternating Copolymers Allows Control of Glass Transition and Hydrophobicity

We previously reported that cyclohexene and bicyclo[4.2.0]oct-1(8)-ene-8-carboxamides undergo efficient ruthenium-catalyzed alternating ring-opening metathesis polymerization (AROMP). Here, we demonstrate that cyclodecene and cyclododecene also function as cycloalkene monomers in the bicyclo[4.2.0]oct-1(8)-ene-8-carboxamide AROMP system, thus enabling the synthesis of linear alternating copolymers with spacers of different lengths, as demonstrated by means of NMR spectroscopy and gel permeation chromatography. The glass transition temperature and hydrophilicity of the alternating copolymers decrease as the length of the spacers increases, as determined by differential scanning calorimetry and water contact angle measurements.

Functional Precision Polymers via Stereo- and Regioselective Polymerization Using Group 6 Metal Alkylidene and Group 6 and 8 Metal Alkylidene N-Heterocyclic Carbene Complexes

The concepts of functional precision polymers and the latest accomplishments in their synthesis are summarized. Synthetic concepts based on chain growth polymerization are compared to iterative synthetic approaches. Here, the term "functional precision polymers" refers to polymers that are not solely hydrocarbon-based but contain functional groups and are characterized by a highly ordered primary structure. If insertion polymerization is used for their synthesis, olefin metathesis-based polymerization techniques, that is, ring-opening metathesis polymerization (ROMP), acyclic diene metathesis (ADMET) polymerization, and the regio- and stereoselective cyclopolymerization of α,ω-diynes are almost exclusively applied. Particularly with regio- and stereospecific ROMP and with cyclopolymerization, the synthesis of tactic polymers and copolymers with high regio-, stereo-, and sequence control can be accomplished; however, it requires carefully tailored transition metal catalysts. The fundamental synthetic concepts and strategies are outlined.

Alternating Ring-Opening Metathesis Polymerization (AROMP) of Hydrophobic and Hydrophilic Monomers Provides Oligomers with Side-Chain Sequence Control

We report the formation of oligomers with side-chain sequence control using ruthenium-catalyzed alternating ring-opening metathesis polymerization (AROMP). These oligomers are prepared through sequential, stoichiometric addition of bicyclo[4.2.0]oct-1(8)-ene-8-carboxamide (monomer A) at 85 °C and cyclohexene (monomer B) at 45 °C to generate sequences up to 24 monomeric units composed of (A-alt- B) n and (A'-alt-B) n microblocks, where n ranges from 1 to 6. Herein, monomer A has an alkyl side chain, and monomer A' has a glycine methyl ester side chain. Increasing microblock size from one to six results in an increasing water contact angle on spin-coated thin films, despite the constant ratio of hydrophilic and hydrophobic moieties. However, a disproportionately high contact angle was observed when n equals 2. Thus, the unique all-carbon backbone formed in the AROMP of bicyclo[4.2.0]oct-1(8)-ene-8-carboxamides and cyclohexene provides a platform for the nontemplated preparation of materials with specific sequences of side chains.

Access to Bicyclo[4.2.0]octene Monomers To Explore the Scope of Alternating Ring-Opening Metathesis Polymerization

Bicyclo[4.2.0]oct-1(8)-ene-8-carboxamides undergo alternating ring-opening metathesis polymerization (AROMP) with cyclohexene. Herein, a general method for the preparation of bicyclo[4.2.0]oct-(8)-ene-8-carboxy derivatives is described. The central 8-cyano intermediate provides entry to five different functional group substituents on the alkene. These monomers were tested as potential substrates for AROMP with cyclohexene. In addition to the carboxamide, the carboxynitrile and carboxaldehyde are also substrates for AROMP. In the case of the carboxaldehyde, the polymer is regioregular. However, the addition of carboxynitrile is stereoirregular and slow.

Fluorinated polymer surfactants bearing an alternating peptide skeleton prepared by three-component polycondensation

A new species of fluorinated polymer surfactant was developed by three component polycondensation analogous to Ugi four-component condensation. The surfactant exhibited unique surface properties, which made cellulose-based materials hydrophobic and decreased the surface tension of CHCl₃. It turned out that the polymer forms micelles in CHCl₃.

A new species of fluorinated polymer surfactant was developed by three component polycondensation analogous to Ugi four-component condensation.

Alternating ring-opening metathesis polymerization by Grubbs-type catalysts with N-pentiptycenyl, N-alkyl-NHC ligands

A Grubbs–Hoveyda type catalyst with a N-pentiptycenyl, N-cyclohexyl-NHC ligand provides poly(nbe-alt-coe) with an excellent degree of alternation.

Synthesis of Poly(norbornene-methylamine), a Biomimetic of Chitosan, by Ring-Opening Metathesis Polymerization (ROMP)

ROMP is an effective method for preparing functional polymers due to its having characteristics of "living" polymerization and rapid development of catalysts. In the present work, poly(norbornene-methylamine), a mimic of chitosan, was synthesized via ROMP reaction. The amino-protected product, 5-norbornene-2-(N-methyl)-phthalimide, was prepared by a reaction of 5-norbornene-2-methylamine with phthalic anhydride, which was then subjected to the ROMP reaction in the presence of Hoveyda-Grubbs 2nd catalyst to afford poly(norbornene-(N-methyl)-phthalimide). The target product, poly(norbornene-methylamine), was obtained by deprotection reaction of poly(norbornene-(N-methyl)-phthalimide). The products in each step were characterized by FTIR and ¹H-NMR, and their thermal stabilities were determined by TG analysis. The effects of molar ratio between monomer ([M]/[I]) and catalyst on the average relative molecular weight ( M n ¯ ) and molecular weight distribution of the produced polymer products were determined by gel permeation chromatography (GPC). It was found that the M n ¯ of poly(norbornene-(N-methyl)-phthalimide) was controllable and exhibited a narrow polydispersity index (PDI) (~1.10). The synthesis condition of 5-norbornene-2-(N-methyl)-phthalimide was optimized by determining the yields at different reaction temperatures and reaction times. The highest yield was obtained at a reaction temperature of 130 °C and a reaction time of 20 min. Our work provides a new strategy to synthesize polymers with controllable structures and free -NH₂ groups via ROMP.