Toward the Tailoring Chemistry of Metal Nanoclusters for Enhancing Functionalities

Factors governing the protonation of Keggin-type polyoxometalates: influence of the core structure in clusters

Atomic substitution is a promising approach for controlling structures and properties for developing clusters with desired responses. Although many possible coordination candidates could be deduced for substitution, not all can be prepared. Therefore, predicting the correlation between structures and physical properties is important prior to synthesis. In this study, regarding Keggin-type polyoxometalates (POMs) as a model cluster, the dominant factors affecting the protonation were investigated by atomic substitutions and geometry changes. The valence of Keggin-type POMs and the constituent elements of the cluster shell structure affect the charge and potential distribution, which change the protonation sites. Furthermore, the valence of Keggin-type POMs and the bond length between the core and shell structure determine the protonation energy. These factors also affect the HOMO-LUMO gap, which governs photochemical and redox reactions. These governing factors derived from actual parameters of the α-isomer of Keggin-type POMs enabled us to deduce the protonation energy of the β-isomer, which is more difficult to prepare and isolate than the α-isomer.

Advanced Functionalized Nanoclusters (Cu, Ag, and Au) as Effective Catalyst for Organic Transformation Reactions

A considerable amount of research has been carried out in recent years on synthesizing metal nanoclusters (NCs), which have wide applications in the field of optical materials with non-linear properties, bio-sensing, and catalysis. Aside from being structurally accurate, the atomically precise NCs possess well-defined compositions due to significant tailoring, both at the surface and the core, for certain functionalities. To illustrate the importance of atomically precise metal NCs for catalytic processes, this review emphasizes 1) the recent work on Cu, Ag, and Au NCs with their synthesis, 2) the parameters affecting the activity and selectivity of NCs catalysis, and 3) the discussion on the catalytic potential of these metal NCs. Additionally, metal NCs will facilitate the design of extremely active and selective catalysts for significant reactions by elucidating catalytic mechanisms at the atomic and molecular levels. Future advancements in the science of catalysis are expected to come from the potential to design NCs catalysts at the atomic level.

Chemical Flexibility of Atomically Precise Metal Clusters

Ligand-protected metal clusters possess hybrid properties that seamlessly combine an inorganic core with an organic ligand shell, imparting them exceptional chemical flexibility and unlocking remarkable application potential in diverse fields. Leveraging chemical flexibility to expand the library of available materials and stimulate the development of new functionalities is becoming an increasingly pressing requirement. This Review focuses on the origin of chemical flexibility from the structural analysis, including intra-cluster bonding, inter-cluster interactions, cluster-environments interactions, metal-to-ligand ratios, and thermodynamic effects. In the introduction, we briefly outline the development of metal clusters and explain the differences and commonalities of M(I)/M(I/0) coinage metal clusters. Additionally, we distinguish the bonding characteristics of metal atoms in the inorganic core, which give rise to their distinct chemical flexibility. Section 2 delves into the structural analysis, bonding categories, and thermodynamic theories related to metal clusters. In the following sections 3 to 7, we primarily elucidate the mechanisms that trigger chemical flexibility, the dynamic processes in transformation, the resultant alterations in structure, and the ensuing modifications in physical-chemical properties. Section 8 presents the notable applications that have emerged from utilizing metal clusters and their assemblies. Finally, in section 9, we discuss future challenges and opportunities within this area.

Photoluminescence Quenching of Hydrophobic Ag29 Nanoclusters Caused by Molecular Decoupling during Aqueous Phase Transfer and EmissionRecovery through Supramolecular Recoupling

Exploiting emissive hydrophobic nanoclusters for hydrophilic applications remains a challenge because of photoluminescence (PL) quenching during phase transfer. In addition, the mechanism underlying PL quenching remains unclear. In this study, the PL-quenching mechanism was examined by analyzing the atomically precise structures and optical properties of a surface-engineered Ag29 nanocluster with an all-around-carboxyl-functionalized surface. Specifically, phase-transfer-triggered PL quenching was justified as molecular decoupling, which directed an unfixed cluster surface and weakened the radiative transition. Furthermore, emission recovery of the quenched nanoclusters was accomplished by using a supramolecular recoupling approach through the glutathione-addition-induced aggregation of cluster molecules, wherein the restriction of intracluster motion and intercluster rotation strengthened the radiative transition of the clusters. The results of this work offer a new perspective on structure-emission correlations for atomically precise nanoclusters and hopefully provide insight into the fabrication of highly emissive cluster-based nanomaterials for downstream hydrophilic applications.

Tailoring the subshell and electronic structure of an atomically precise AuAg alloy nanocluster

Manipulating the atomic-level structure of the subshell of a nanocluster while preserving the inner and outer shell structure is challenging. We present the synthesis and molecular structure of an alkynyl-protected Au34Ag27 nanocluster, which exhibits distinct third shell atomic arrangement, electronic structure, and optical properties from those of the Au34Ag28 nanocluster.

Effects of bromine-containing counterion salts in directing the structures of medium-sized silver nanoclusters

The preparation and structural determination of silver nanoclusters (especially the medium-sized Ag clusters) remain more challenging relative to those of their gold counterparts because of the comparative instability of the former. In this work, three medium-sized Ag clusters were controllably synthesized and structurally determined, namely, [Ag52(S-Adm)30Br4H20]2- (Ag52 for short), Ag54(S-Adm)30Br4H20 (Ag54 for short), and [Ag58(S-Adm)30Br4(NO3)2H22]2+ (Ag58 for short) nanoclusters. Specifically, the introduction of PPh4Br gave rise to the generation of Ag52 and Ag54 nanoclusters with homologous compositions and configurations, while the TOABr salt selected Ag58 as the sole cluster product, whose geometric structure was completely different from those of Ag52 and Ag54 nanoclusters. In addition, the optical absorptions and emissions of the three medium-sized silver nanoclusters were compared. The findings in this work not only provide three uniquely medium-sized nanoclusters to enrich the silver cluster family but also point out a new approach (i.e., changing the counterion salt) for the preparation of new nanoclusters with novel structures.

Self-assembled copper nanoclusters used to mimic peroxidase for glucose detection

A sensing system for glucose was established based on a self-assembled copper nanoclusters (Cu NCs)-based nano-enzyme and glucose oxidase (GOD). The assembled copper nanosheets (Cu NSs) were prepared in a one-step method using 2,3,4,5,6-pentafluorothiophenol (PFTP) as a reducing agent and protecting ligand. Cu NSs could be used to mimic the enzyme horseradish peroxidase. Cu NSs were endowed with excellent enzymatic catalytic activity in the oxidation of o-phenyldiamine (OPD) in the presence of H2O2. The latter could be generated in the aerobic oxidation of glucose catalyzed by GOD. Therefore, a detection method for glucose was constructed based on a Cu NSs-OPD-GOD catalytic system. This proposed sensing platform showed a standard linear range from 10 μM to 5 mM towards glucose, and the limit of detection was 5.5 μM. Finally, practical application of a sensor based on the Cu NSs nano-enzyme was verified in three sugared beverages as real samples. Our data reveal that the prepared Cu NSs could mimic peroxidase and be applied to a mixed catalytic system with GOD for glucose detection.

Effect of Specific Heavy Doping of Silver Atoms into the Icosahedral Au13 on Electronic Structure and Catalytic Performance

The exploration of specific heavy doping of silver atoms into icosahedral Au13 clusters and their electronic structures and properties has been somewhat limited. Herein, we report two heavily Ag doped nanoclusters, [Au7Ag6(C7H4NOS)4(Dppf)3Cl]0 and [Au7Ag6(C7H4NOS)3(Dppf)3Cl](SbF6) (Au7Ag6-0 and Au7Ag6-1, respectively) [C7H4NOSH = 2-mercaptobenzoxazole, and Dppf = 1,1'-bis(diphenylphosphino)ferrocene]. The electronic structures and superatomic orbitals of nanoclusters were determined by density functional theory (DFT) calculations, and the energy degeneracy of the superatomic orbitals of Au7Ag6-1 is higher than that of Au7Ag6-0. Transient absorption spectroscopy was performed, revealing that Au7Ag6-0 significantly extends the excited-state lifetime. Both nanoclusters were supported on activated carbon for the oxygen reduction reaction. DFT calculations confirm that the catalytic activities mainly stem from the carbon atom of ferrocene rather than the iron atom. This study not only sheds light on the preparation of icosahedral alloy clusters but also provides insights into the regulation of icosahedral superatomic structure and electrocatalytic properties.

An Electroactive and Self-Assembling Bio-Ink, based on Protein-Stabilized Nanoclusters and Graphene, for the Manufacture of Fully Inkjet-Printed Paper-Based Analytical Devices

Hundreds of new electrochemical sensors are reported in literature every year. However, only a few of them makes it to the market. Manufacturability, or rather the lack of it, is the parameter that dictates if new sensing technologies will remain forever in the laboratory in which they are conceived. Inkjet printing is a low-cost and versatile technique that can facilitate the transfer of nanomaterial-based sensors to the market. Herein, an electroactive and self-assembling inkjet-printable ink based on protein-nanomaterial composites and exfoliated graphene is reported. The consensus tetratricopeptide proteins (CTPRs), used to formulate this ink, are engineered to template and coordinate electroactive metallic nanoclusters (NCs), and to self-assemble upon drying, forming stable films. The authors demonstrate that, by incorporating graphene in the ink formulation, it is possible to dramatically improve the electrocatalytic properties of the ink, obtaining an efficient hybrid material for hydrogen peroxide (H2 O2 ) detection. Using this bio-ink, the authors manufactured disposable and environmentally sustainable electrochemical paper-based analytical devices (ePADs) to detect H2 O2 , outperforming commercial screen-printed platforms. Furthermore, it is demonstrated that oxidoreductase enzymes can be included in the formulation, to fully inkjet-print enzymatic amperometric biosensors ready to use.

Core-Packing-Related Vibrational Properties of Thiol-Protected Gold Nanoclusters and Their Excited-State Behavior

Thiolate-protected gold nanoclusters, with unique nuclearity- and structure-dependent properties, have been extensively used in energy conversion and catalysis; however, the mystery between kernel structures and properties remains to be revealed. Here, the influence of core packing on the electronic structure, vibrational properties, and excited-state dynamics of four gold nanoclusters with various kernel structures is explored using density functional theory combined with time-domain nonadiabatic molecular dynamics simulations. We elucidate the correlation between the geometrical structure and excited-state dynamics of gold nanoclusters. The distinct carrier lifetimes of the four nanoclusters are attributed to various electron-phonon couplings arising from the different vibrational properties caused by core packing. We have identified specific phonon modes that participate in the electron-hole recombination dynamics, which are related to the gold core of nanoclusters. This study paints a physical picture from the geometric configuration, electronic structure, vibrational properties, and carrier lifetime of these nanoclusters, thereby facilitating their potential application in optoelectronic materials.

Controlled Formation of Fused Metal Chalcogenide Nanoclusters Using Soft Landing of Gaseous Fragment Ions

The complete ligation of nanoclusters significantly reduces their chemical reactivity, catalytic activity, and charge transfer properties. Therefore, in applications, nanoclusters are activated through partial ligand removal to take advantage of their full potential. However, the precise control of ligand removal in the condensed phase is challenging. In this study, we examine the reactivity of well-defined activated nanoclusters on surfaces prepared through controlled ligand removal in the gas phase. To accomplish this, we utilized a specially designed ion soft-landing instrument equipped with a collision cell to prepare mass-selected fragment ions, which were then deposited onto self-assembled monolayer (SAM) surfaces. Specifically, we generated fragment ions by selectively removing one or two ligands from a series of atomically precise ligated metal sulfide clusters, Co5MS8(L1)6+ (M = Co, Mn, Fe, or Ni, L1 = PEt3). Removal of one ligand from Co5MS8(L1)6+ (M = Co, Mn, Ni) generates Co5MS8(L1)5+ species, which undergo selective dimerization on SAMs. Meanwhile, Co5FeS8(L1)5+ is unreactive and remains intact when it is deposited onto a SAM surface. In contrast, fragments formed by the removal of two ligands, Co5MS8(L1)4+, undergo several nonselective reactions and generate larger fused clusters. We found that the reactivity of the Co5MS8(L1)5+ fragment ions is correlated with the gas phase stability of the corresponding precursor ion toward ligand loss. Specifically, the relatively unstable precursor ion, Co5FeS8(L1)6+, generates the least reactive fragment. Meanwhile, the more stable precursor ions generate more reactive Co5MS8(L1)5+ fragments that dimerize on surfaces. This observation was also confirmed by co-deposition of fragment ions with two different ligands, Co5MS8(L1)5+ and Co5MS8(L2)5+ (L1 = PEt3 and L2 = PEt2Ph), where fragments generated from more stable precursor ions tend to dimerize and generate dimers with mixed ligands. This study unveils the previously unrecognized potential of fragment ions in generating compounds that are difficult to synthesize using conventional methods. Additionally, it provides a mechanistic understanding of the observed reactivity. Mass-selected deposition of well-defined fragment ions emerges as a powerful approach for designing materials by precisely activating and depositing undercoordinated ligated nanoclusters onto surfaces.

Isostructural Nanocluster Manipulation Reveals Pivotal Role of One Surface Atom in Click Chemistry

Elucidating single-atom effects on the fundamental properties of nanoparticles is challenging because single-atom modifications are typically accompanied by appreciable changes to the overall particle's structure. Herein, we report the synthesis of a [Cu58 H20 PET36 (PPh3 )4 ]2+ (Cu58 ; PET: phenylethanethiolate; PPh3 : triphenylphosphine) nanocluster-an atomically precise nanoparticle-that can be transformed into the surface-defective analog [Cu57 H20 PET36 (PPh3 )4 ]+ (Cu57 ). Both nanoclusters are virtually identical, with five concentric metal shells, save for one missing surface copper atom in Cu57 . Remarkably, the loss of this single surface atom drastically alters the reactivity of the nanocluster. In contrast to Cu58 , Cu57 shows promising activity for click chemistry, particularly photoinduced [3+2] azide-alkyne cycloaddition (AAC), which is attributed to the active catalytic site in Cu57 after the removal of one surface copper atom. Our study not only presents a unique system for uncovering the effect of a single-surface atom modification on nanoparticle properties but also showcases single-atom surface modification as a powerful means for designing nanoparticle catalysts.

Total Structure, Electronic Structure and Catalytic Hydrogenation Activity of Metal-Deficient Chiral Polyhydride Cu57 Nanoclusters

Accurate identifying and in-depth understanding of the defect sites in a working nanomaterial could hinge on establishing specific defect-activity relationships. Yet, atomically precise coinage-metal nanoclusters (NCs) possessing surface vacancy defects are scarce primarily owing to challenges in the synthesis and isolation of such defective NCs. Herein we report a mixed-ligand strategy to synthesizing an intrinsically chiral and metal-deficient copper hydride-rich NC [Cu57 H20 (PET)36 (TPP)4 ]+ (Cu57 H20 ). Its total structure (including hydrides) and electronic structure are well established by combined experimental and computational results. Crystal structure reveals Cu57 H20 features a cube-like Cu8 kernel embedded in a corner-missing metal-ligand shell of Cu49 (PET)36 (TPP)4 . Single Cu vacancy defect site occurs at one corner of the shell, evocative of mono-lacunary polyoxometalates. Theoretical calculations demonstrate that the above-mentioned point vacancy causes one surface hydride exposed as an interfacial capping μ3 -H- , which is accessible in chemical reaction, as proved by deuterated experiment. Moreover, Cu57 H20 shows catalytic activity in the hydrogenation of nitroarene. The success of this work opens the way for the research on well-defined chiral metal-deficient Cu and other metal NCs, including exploring their application in asymmetrical catalysis.

Ultrasmall Coinage Metal Nanoclusters as Promising Theranostic Probes for Biomedical Applications

Ultrasmall coinage metal nanoclusters (NCs, <3 nm) have emerged as a novel class of theranostic probes due to their atomically precise size and engineered physicochemical properties. The rapid advances in the design and applications of metal NC-based theranostic probes are made possible by the atomic-level engineering of metal NCs. This Perspective article examines (i) how the functions of metal NCs are engineered for theranostic applications, (ii) how a metal NC-based theranostic probe is designed and how its physicochemical properties affect the theranostic performance, and (iii) how metal NCs are used to diagnose and treat various diseases. We first summarize the tailored properties of metal NCs for theranostic applications in terms of biocompatibility and tumor targeting. We focus our discussion on the theranostic applications of metal NCs in bioimaging-directed disease diagnosis, photoinduced disease therapy, nanomedicine, drug delivery, and optical urinalysis. Lastly, an outlook on the challenges and opportunities in the future development of metal NCs for theranostic applications is provided.

Secondary hierarchical complexity in double-stranded cluster helicates covered by NNNNN type pincer ligands

We designed and synthesized a new tripyridine dipyrrolide pincer ligand, which could be doubly deprotonated to provide five-nitrogen-donor sites and then utilized to prepare a subnanometric chiral silver cluster. The cluster belongs to an S₄ point group and shows a double-stranded helicate. DFT calculations were performed to analyze the electronic structure of the cluster. Interestingly, through hierarchical intercluster interactions, the cluster helicates evolve into complex secondary structures including a right-handed helix and a folded sheet, both of which are reminiscent of secondary structures of proteins, i.e., an α-helix and an antiparallel β-sheet.

Intermediate Silver Doping of Au25(SR)18: Variation of Electronic, Optical, and Chiroptical Properties along Au25-xAgx(SH)18- (x = 0-12) Stoichiometry from DFT Calculations

The silver analogue of the prominent Au₂₅(SR)₁₈ nanocluster reveals the possibility of finding "gold"-like behavior despite their different nature, in addition to the common features among molecular AgNP. Herein, we explore the effect of successive additions of silver atoms reaching an intermediate Ag/Au doping ratio where the parent gold cluster exhibits properties from both elements. Our results show a more favorable situation as the Ag/Au ratio increases along the Au_25-xAg_x(SH)₁₈^- (x = 0-12) clusters, with structural distortions mainly centered at the ligand-protected shell. The calculated optical spectrum shows that from the Au₁₉Ag₆ species, a plasmon-like peak appears along species with a doping ratio above 25%, where all the silver atoms are located within the M₁₂ icosahedron. In addition, the chiral properties were explored, showing mild optical activity from the calculated circular dichroism spectra due to the distorted ligand-shell avoiding a centrosymmetric structure. Thus, an intermediate doping ratio ascribed to a specific structural layer can recover inherent properties to both elements in the binary Au_25-xAg_x(SH)₁₈^- series, suggesting the possibility of having clusters with dual properties at a certain degree of element exchange. This can be useful for further exploration theoretically and synthetically toward different and larger-nuclearity clusters.

High-nuclearity and thiol protected core-shell [Cu75(S-Adm)32]2+: distorted octahedra fixed to Cu15 core via strong cuprophilic interactions

Atomically precise nanoclusters have a critical role in understanding the structure-property relationships at the atomic level. Copper nanoclusters have attracted considerable attention, but the synthesis is limited because of susceptibility to oxidation. Herein, we developed a reduction speed controlling method to synthesize [Cu₇₅(S-Adm)₃₂]²⁺ (HS-Adm: 1-Adamantanethiol) nanocluster and reveal the key steps in the nucleation process. Cu₇₅ was first observed and characterized with the following features: (i) composed of a face-centered cubic Cu₁₅ kernel and a Cu₆₀ caged shell including 12 distorted octahedra. (ii) The observation of the shortest Cu-Cu bond (2.166(7) Å) in the Cu nanoclusters, which could result from the distortion of the octahedron. (iii) The sole μ³-S mode of S, which plays two roles as a vertex and bridge atom to connect Cu atoms. This work presents a unique nanoball Cu nanocluster with strong cuprophilic interaction and provides a novel method to expand the family of Cu nanoclusters as well.

Overall structure of Au12Ag60(S-c-C6H11)31Br9(Dppp)6: achieving a stronger assembly of icosahedral M13 units

Precise atomically assembled nanoclusters provide a great platform to elucidate the evolution of the assembly of building blocks. Herein, a large icosahedral (M₁₃)-based silver-gold alloy nanocluster [Au₁₂Ag₆₀(S-c-C₆H₁₁)₃₁Br₉(Dppp)₆]Br₂ (dppp = 1,3-bis(diphenylphosphino)propane) is reported. Structurally, Au₁₂Ag₆₀ consists of an Au₁₂Ag₄₀ kernel, which is viewed as the interpenetration of ten twisted complete icosahedrons (M₁₃) and two missing icosahedrons (M₁₂), and this is surrounded by a complex metal-organic shell. Benefiting from the extra doping of eight to twelve Au atoms, the octameric assembly was increased to a twelve-mer assembly. The time-dependent density functional theory (TDDFT) method with a Tamm-Dancoff approximation (TDA) was performed to investigate the difference in the optical properties of Au₁₂Ag₆₀ and Au₈Ag₅₇. The results indicate that the difference in the amount of Au atoms results in different optical properties. Furthermore, transient absorption spectroscopy (TA) was also performed, revealing that a twelve-mer assembly greatly enhances the excited-state lifetime. The [Au₁₂Ag₆₀(S-c-C₆H₁₁)₃₁Br₉(Dppp)₆]Br₂ alloy nanocluster has provided a breakthrough in the number of icosahedral M₁₃ assemblies, i.e., achieving a twelve-mer assembly, helping to elucidate the fusion growth of M₁₃-based assembled nanoclusters as well as their geometric/electronic structure correlations, which will promote further research on the assembly of M₁₃ nano-building blocks, especially on their optical properties.

Surface Ligand Influences the Cu Nanoclusters as a Dual Sensing Optical Probe for Localized pH Environment and Fluoride Ion

Functional metal nanomaterials, especially in the nanocluster (NC) size regime, with strong fluorescence, aqueous colloidal stability, and low toxicity, necessitate their application potential in biology and environmental science. Here, we successfully report a simple cost-effective method for red-/green-color-emitting protein/amino-acid-mediated Cu NCs in an aqueous medium. As-synthesized Cu NCs were characterized through UV-Vis absorption spectroscopy, fluorescence spectroscopy, time-resolved photoluminescence, dynamic light scattering, zeta potential, transmission electron microscopy and X-ray photoelectron spectroscopy. The optical properties of both Cu NCs responded linearly to the variation in pH in the neutral and alkaline ranges, and a robust pH reversible nature (between pH 7 and 11) was observed that could be extended to rapid, localized pH sensor development. However, a contrasting pH response nature between protein-Cu NCs and amino acid-Cu NCs was recorded. The alteration in protein secondary structure and strong binding nature of the surfactants were suggested to explain this behavior. Furthermore, we investigated their use as an efficient optical probe for fluoride ion detection. The limit of detection for protein-Cu NCs is 6.74 µM, whereas the limit of detection for amino acid-Cu NCs is 4.67 µM. Thus, it is anticipated that ultrasmall Cu NCs will exhibit promise in biological and environmental sensing applications.

Superatomic Three-Center Bond in a Tri-Icosahedral Au36Ag2(SR)18 Cluster: Analogue of 3c-2e Bond in Molecules

Probing the nature of electronic stability for ligand-protected gold clusters is important in gold chemistry. A thermally stable Au₃₆Ag₂(SR)₁₈ nanocluster was synthesized recently. It has a D_3h tri-icosahedral [Au₃₀Ag₂]¹²⁺ core with 20 valence electrons, which does not follow the magic number of gold superatoms. Herein, we propose a superatomic three-center bond to unveil its electronic stability. The [Au₃₀Ag₂]¹²⁺ core is viewed as a union of three face-fused superatoms, and chemical bonding analysis suggests a three-superatom-center two-electron (3sc-2e) bond for the octet rule of each superatom, which mimics the bonding framework of the D_3h O₃^2- molecule. Moreover, a liganded tri-icosahedral [Au₂₇Pt₃Ag₂]¹¹⁺ core with 18 valence electrons is predicted, and three 2sc-2e bonds are formed between each of two superatoms to satisfy the octet rule (analogue of D_3h O₃), indicating the flexibility of superatomic bonding. Such a superatomic three-center bond extends the community of superatomic bonding and gives a new perspective for superatom assembling.

Conductance Growth of Single-Cluster Junctions with Increasing Sizes

Quantum-tunneling-based nanoelectronics has the potential for the miniaturization of electronics toward the sub-5 nm scale. However, the nature of phase-coherent quantum tunneling leads to the rapid decays of the electrical conductance with tunneling transport distance, especially in organic molecule-based nanodevices. In this work, we investigated the conductance of the single-cluster junctions of a series of atomically well-defined silver nanoclusters, with varying sizes from 0.9 to 3.0 nm, using the mechanically controllable break junction (MCBJ) technique combined with quantum transport theory. Our charge transport investigations of these single-cluster junctions revealed that the conductance grows with increasing cluster size. The conductance decay constant was determined to be ∼-0.4 nm^-1, which is of opposite sign to that of organic molecules. Comparison between experiment and theory reveals that although charge transport through the silver single-cluster junctions occurs via phase-coherent tunneling, this is compensated by a rapid decrease in the energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO-LUMO gap) with size and the increase in the electrode-cluster coupling, which results in their conductance increase up to lengths of ∼3.0 nm. These results demonstrate that such families of nanoclusters provide unique bottom-up building blocks for the fabrication of nanodevices in the sub-5 nm size range.

Antibacterial metal nanoclusters

Combating bacterial infections is one of the most important applications of nanomedicine. In the past two decades, significant efforts have been committed to tune physicochemical properties of nanomaterials for the development of various novel nanoantibiotics. Among which, metal nanoclusters (NCs) with well-defined ultrasmall size and adjustable surface chemistry are emerging as the next-generation high performance nanoantibiotics. Metal NCs can penetrate bacterial cell envelope more easily than conventional nanomaterials due to their ultrasmall size. Meanwhile, the abundant active sites of the metal NCs help to catalyze the bacterial intracellular biochemical processes, resulting in enhanced antibacterial properties. In this review, we discuss the recent developments in metal NCs as a new generation of antimicrobial agents. Based on a brief introduction to the characteristics of metal NCs, we highlight the general working mechanisms by which metal NCs combating the bacterial infections. We also emphasize central roles of core size, element composition, oxidation state, and surface chemistry of metal NCs in their antimicrobial efficacy. Finally, we present a perspective on the remaining challenges and future developments of metal NCs for antibacterial therapeutics.

New structural insights into the stability of Au22(SR)16 nanocluster under ring model guidance

This study presents thorough structural insights into the stability of crystallized Au₂₂(SAdm)₁₆ (HSAdm = 1-adamantanethiol) nanocluster. With the recently developed Ring Model for describing the interaction between inner gold cores and outer protecting ligands in thiolate-protected gold nanoclusters, the experimental spontaneous transformation from the crystallized Au₂₂(SAdm)₁₆ to Au₂₁(SAdm)₁₅ could be well understood as structurally unfavorable for the current Au₂₂(SAdm)₁₆ and could also be attributed to the weaker aurophilic interaction between the inner Au₄ core and the surrounding rings in Au₂₂(SAdm)₁₆ over that in Au₂₁(SAdm)₁₅. Furthermore, with the Ring Model and the grand unified model, two new Au₂₂(SCH₃)₁₆ isomers with evident lower energies, higher HOMO-LUMO gaps as well as distinct optical properties over the available crystallized isomer were obtained. This study deepens the current knowledge on the structure of the Au₂₂(SR)₁₆ cluster from a new structural point of view and also confirms the validity as well as practicability of the Ring Model in understanding and predicting the stable structures of thiolate-protected gold nanoclusters.

Toward Understanding the Correlation between the Charge States and the Core Structures in Thiolate-Protected Gold Nanoclusters

The charge states of thiolate-protected gold nanoclusters (AuNCs) are vital to their stabilities through affecting the number of the valence electrons. However, the origin of the charge states of AuNCs has not been fully understood yet. Herein, through fulfilling the duet-rule derived Au₃(2e) and Au₄(2e) elementary blocks in the grand unified model (GUM), analysis on the substantial crystal structures indicates the charge states of AuNCs can correlate with their core structural packing, especially the number of Au₃(2e) elementary blocks. In addition, aided by the Au₃(2e) block's role in tailoring the population of valence electron, three new AuNCs including Au₁₈(SCH₃)₁₄, Au₃₀(SCH₃)₂₀, and [Au₃₀(SCH₃)₂₁]^- are predicted through controllably specifying the exact number of Au₃(2e) in the core. This work shows that GUM can bridge the gap among the charge states of the cluster, the inner core structure of the cluster, and the detachment of outer ligands via the electron counting rule.

Engineering colloidally stable, highly fluorescent and nontoxic Cu nanoclusters via reaction parameter optimization

Metal nanoclusters (NCs) composed of the least number of atoms (a few to tens) have become very attractive for their emerging properties owing to their ultrasmall size. Preparing copper nanoclusters (Cu NCs) in an aqueous medium with high emission properties, strong colloidal stability, and low toxicity has been a long-standing challenge. Although Cu NCs are earth-abundant and inexpensive, they have been comparatively less explored due to their various limitations, such as ease of surface oxidation, poor colloidal stability, and high toxicity. To overcome these constraints, we established a facile synthetic route by optimizing the reaction parameters, especially altering the effective concentration of the reducing agent, to influence their optical characteristics. The improvement of the photoluminescence intensity and superior colloidal stability was modeled from a theoretical standpoint. Moreover, the as-synthesized Cu NCs showed a significant reduction of toxicity in both in vitro and in vivo models. The possibility of using such Cu NCs as a diagnostic probe toward C. elegans was explored. Also, the extension of our approach toward improving the photoluminescence intensity of the Cu NCs on other ligand systems was demonstrated.

A facile synthetic strategy to engineer improved fluorescent quantum yield, colloidally stable, and low toxic Cu nanoclusters is introduced. These nanoclusters have the potential to be used as excellent bioimaging probes.

Engineering Gold Nanostructures for Cancer Treatment: Spherical Nanoparticles, Nanorods, and Atomically Precise Nanoclusters

Cancer is a major global health issue and is a leading cause of mortality. It has been documented that various conventional treatments can be enhanced by incorporation with nanomaterials. Thanks to their rich optical properties, excellent biocompatibility, and tunable chemical reactivities, gold nanostructures have been gaining more and more research attention for cancer treatment in recent decades. In this review, we first summarize the recent progress in employing three typical gold nanostructures, namely spherical Au nanoparticles, Au nanorods, and atomically precise Au nanoclusters, for cancer diagnostics and therapeutics. Following that, the challenges and the future perspectives of this field are discussed. Finally, a brief conclusion is summarized at the end.

Dual External Field-Engineered Hyperhalogen

Hyperhalogens, a superatom featuring the highest known electron affinity (EA), have promising applications in the synthesis of superoxidizers. Contributions regarding the identified numbers and corresponding design strategies of hyperhalogens, however, are scarce. Herein, a novel and noninvasive dual external field (DEF) strategy, including the ligand field and oriented external electric field (OEEF), is proposed to construct hyperhalogens. The DEF strategy was shown to possess the power to increase Au₈'s EA, forming the hyperhalogen. Strikingly, the ligation process can increase the cluster's stability, while OEEF can realize the precise and continuous regulation of the cluster's EA. Moreover, besides the model Au₈ system, an experimentally synthesized Ag₁₇ nanocluster was also investigated, further demonstrating the reliability of the proposed strategy. Considering the crucial role of ligands in the liquid synthesis of clusters and the convenient source of OEEF, such a DEF strategy may greatly increase the synthesis and applications of hyperhalogens in the condensed phase.

Looking at platinum carbonyl nanoclusters as superatoms

Although the chemistry of carbonyl-protected platinum nanoclusters is well established, their bonding mode remains poorly understood. In most of them, the average Pt oxidation state is zero or slightly negative, leading to the apparent average configuration 5d¹⁰ 6s^ε (ε = 0 or very small) and the apparent conclusion that metal-metal bonding cannot arise from the completely filled 5d shell nor from the empty (or almost empty) 6s orbitals. However, DFT calculations show in fact that in these species the actual average configuration is 5d^10-x 6s^x, which provides to the whole cluster a significant total number of 6s electrons that ensures metal-metal bonding. This ("excited") average configuration is to be related to that of coinage metals in ligated group 11 nanoclusters (nd¹⁰ (n + 1)s^x). Calculations show that metal-metal bonding in most of these platinum nanoclusters can be rationalized within the concepts of superatoms and supermolecules, in a similar way as for group 11 nanoclusters. The "excited" 5d^10-x 6s^x configuration results from a level crossing between 5d combinations and 6s combinations, the former transferring their electrons to the latter. This level crossing, which does not exist in the bare Pt_n clusters, is induced by the ligand shell, the role of which being thus not innocent with respect to metal-metal bonding.

Tri- and Tetra-superatomic Molecules in Ligand-Protected Face-Fused Icosahedral (M@Au12)n (M = Au, Pt, Ir, and Os, and n = 3 and 4) Clusters

Cluster assembling has been one of the hottest topics in nanochemistry. In certain ligand-protected gold clusters, bi-icosahedral cores assembled from Au₁₃ superatoms were found to be analogues of diatomic molecules F₂, N₂, and singlet O₂, respectively, in electronic shells, depending upon the super valence bond (SVB) model. However, challenges still remain for extending the scale in cluster assembling via the SVB model. In this work, ligand-protected tri- and tetra-superatomic clusters composed of icosahedral M@Au₁₂ (M = Au, Pt, Ir, and Os) units are theoretically predicted. These clusters are stable with reasonable highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energy gaps and proven to be analogues of simple triatomic (Cl₃^-, OCl₂, O₃, and CO₂) and tetra-atomic (N≡C-C≡N, and Cl-C≡C-Cl) molecules in both geometric and electronic structures. Moreover, a stable cluster-assembling gold nanowire is predicted following the same rules. This work provides effective electronic rules for cluster assembling on a larger scale and gives references for their experimental synthesis.

Surface environment complication makes Ag29 nanoclusters more robust and leads to their unique packing in the supracrystal lattice

Silver nanoclusters have received unprecedented attention in cluster science owing to their promising functionalities and intriguing physical/chemical properties. However, essential instability significantly impedes their extensive applications. We herein propose a strategy termed “surface environment complication” to endow Ag₂₉ nanoclusters with high robustness. The Ag₂₉(S-Adm)₁₈(PPh₃)₄ nanocluster with monodentate PPh₃ ligands was extremely unstable and uncrystallizable. By substituting PPh₃ with bidentate PPh₂py with dual coordination sites (i.e., P and N), the Ag₂₉ cluster framework was twisted because of the generation of N–Ag interactions, and three NO₃ ligands were further anchored onto the nanocluster surface, yielding a new Ag₂₉(S-Adm)₁₅(NO₃)₃(PPh₂py)₄ nanocluster with high stability. The metal-control or ligand-control effects on stabilizing the Ag₂₉ nanocluster were further evaluated. Besides, Ag₂₉(S-Adm)₁₅(NO₃)₃(PPh₂py)₄ followed a unique packing mode in the supracrystal lattice with several intercluster channels, which has yet been observed in other M₂₉ cluster crystals. Overall, this work presents a new approach (i.e., surface environment complication) for tailoring the surface environment and improving the stability of metal nanoclusters.

A strategy of “surface environment complication” has been exploited to endow Ag₂₉ nanoclusters with high robustness and a unique packing mode in the supracrystal lattice.

Photoluminescent nanocluster-based probes for bioimaging applications

In the continuous search for versatile and better performing probes for optical bioimaging and biosensing applications, many research efforts have focused on the design and optimization of photoluminescent metal nanoclusters. They consist of a metal core composed by a small number of atoms (diameter < 2-3 nm), usually coated by a shell of stabilizing ligands of different nature, and are characterized by molecule-like quantization of electronic states, resulting in discrete and tunable optical transitions in the UV-Vis and NIR spectral regions. Recent advances in their size-selective synthesis and tailored surface functionalization have allowed the effective combination of nanoclusters and biologically relevant molecules into hybrid platforms, that hold a large potential for bioimaging purposes, as well as for the detection and tracking of specific markers of biological processes or diseases. Here, we will present an overview of the latest combined imaging or sensing nanocluster-based systems reported in the literature, classified according to the different families of coating ligands (namely, peptides, proteins, nucleic acids, and biocompatible polymers), highlighting for each of them the possible applications in the biomedical field.

Understanding the Nascent Plasmons and Metallic Bonding in Atomically Precise Gold Nanoclusters

The metallic bond is arguably the most intriguing one among the three types of chemical bonds, and the resultant plasmon excitation (e.g. in gold nanoparticles) has garnered wide interest. Recent...

Electrochemical CO2 reduction catalyzed by atomically precise alkynyl-protected Au7Ag8, Ag9Cu6, and Au2Ag8Cu5 nanoclusters: probing the effect of multi-metal core on selectivity

We report the first all-alkynyl-protected Au2Ag8Cu5 cluster, which adopts a M@M8@M6 core configuration similar with Au7Ag8/Ag9Cu6 clusters. The three clusters exhibited strong metal core effect toward CO2RR, which was understood by DFT calculations.

Calculated linear and nonlinear optical absorption spectra of phosphine-ligated gold clusters

Although prediction of optical excitations of ligated gold clusters by time-dependent density functional theory (TDDFT) is relatively well-established, limitations still exist, for example in the choice of the exchange-correlation functional....

Alloying dichalcogenolate-protected Ag21 eight-electron nanoclusters: a DFT investigation

The isoelectronic doping of dichalcogenolato nanoclusters of the type [Ag₂₁{E₂P(OR)₂}₁₂]⁺ (E = S, Se) by any heteroatom belonging to groups 9-12 was systematically investigated using DFT calculations. Although they can differ in their global structure, all of these species have the same M@M₁₂-centered icosahedral core. In any case, the different structure types are all very close in energy. In all of them, three different alloying sites can be identified (central, icosahedral, peripheral) and calculations allowed the trends in heteroatom site occupation preference across the group 9-12 family to be revealed. These trends are supported by complementary experimental results. They were rationalized on the basis of electronegativity, potential involvement in the bonding of valence d-orbitals and atom size. TD-DFT calculations showed that the effect of doping on optical properties is sizable and this should stimulate research on the modulation of luminescence properties in the dithiolato and diseleno families of complexes.

Full-Color Tunable Circularly Polarized Luminescence Induced by the Crystal Defect from the Co-assembly of Chiral Silver(I) Clusters and Dyes

Four pairs of defective crystals exhibiting full-color emission and circularly polarized luminescence (CPL) with high luminescence dissymmetry factor (g_lum) values (∼3 × 10^-3) were successfully obtained by doping dye molecules into the chiral crystalline metal cluster-based matrixes. The dye molecules function as defect inducers and confer fluorescence on the crystals. Studies reveal that electrostatic interactions provide the main impetus in generating defective crystals, and the restricted effect of chiral space and the weak interactions in defect crystal enable the efficient chiral transfer from the intrinsically chiral host silver(I) clusters to achiral luminescent dopants and finally induce them to emit bright CPL. This defect engineering strategy opens a new way to versatile functions for crystalline cluster-based materials.

Structural Chemistry of Giant Metal Based Supramolecules

The review presents a bird-eye view on the state of research in the field of giant nonbiological discrete metal complexes and ions of nanometer size, which are structurally characterized by means of single-crystal X-ray diffraction, using the crystal structure as a common key feature. The discussion is focused on the main structural features of the metal clusters, the clusters containing compact metal oxide/hydroxide/chalcogenide core, ligand-based metal-organic cages, and supramolecules as well as on the aspects related to the packing of the molecules or ions in the crystal and the methodological aspects of the single-crystal neutron and X-ray diffraction of these compounds.

Atomically precise metal nanoclusters meet metal-organic frameworks

Significant progress has been made in both fields of atomically precise metal nanoclusters (NCs) and metal-organic frameworks (MOFs) in recent years. A promising direction is to integrate these two classes of materials for creating unique composites with improved properties for catalysis and other applications. NCs incorporated with MOFs exhibit an optimized catalytic performance in many catalytic reactions, in which MOFs play a vital supporting role or as cocatalysts. In this Perspective, we first provide a brief summary of the methods that have been developed for the preparation of NCs/MOF composites and the characteristics of these strategies are analyzed. Following that, some recent works are highlighted to demonstrate the crucial role of MOF matrices in the enhancement of NCs catalytic properties. Finally, we outline some potentially important aspects for future work. This Perspective is in hopes of stimulating more interest in the research on the integration of NCs with MOFs toward functional materials.

TiO2-supported Au144 nanoclusters for enhanced sonocatalytic performance

The production of reactive oxygen species (ROS), such as hydroxyl radicals, by ultrasonic activation of semiconductor nanoparticles (NPs), including TiO₂, has excellent potential for use in sonodynamic therapy and for the sonocatalytic degradation of pollutants. However, TiO₂ NPs have limitations including low yields of generated ROS that result from fast electron-hole recombination. In this study, we first investigated the sonocatalytic activity of TiO₂-supported Au nanoclusters (NCs) (Au NCs/TiO₂) by monitoring the production of hydroxyl radicals (•OH) under ultrasonication conditions. The deposition of Au₁₄₄ NCs on TiO₂ NPs was found to enhance sonocatalytic activity for •OH production by approximately a factor of 2. Electron-hole recombination in ultrasonically excited TiO₂ NPs is suppressed by Au₁₄₄ NCs acting as an electron trap; this charge separation resulted in enhanced •OH production. In contrast, the deposition of Au₂₅ NCs on TiO₂ NPs resulted in lower sonocatalytic activity due to less charge separation, which highlights the effectiveness of combining Au₁₄₄ NCs with TiO₂ NPs for enhancing sonocatalytic activity. The sonocatalytic action that forms electron-hole pairs on the Au₁₄₄/TiO₂ catalyst is due to both heat and sonoluminescence from the implosive collapse of cavitation bubbles. Consequently, the ultrasonically excited Au₁₄₄ (3 wt. %)/TiO₂ catalyst exhibited higher catalytic activity for the production of •OH because of less light shadowing effect, in contrast to the lower catalytic activity when irradiated with only external light.

Driving Forces and Routes for Aggregation-Induced Emission-Based Highly Luminescent Metal Nanocluster Assembly

The development of ultrasmall, luminescent metal nanoclusters (MNCs) with aggregation-induced emission (AIE) characteristics is a relatively new research area that has gained significant attention in various multidisciplinary applications such as optoelectronics, sensing, imaging, and therapy. The numerous scientific breakthroughs in the AIE field provide many tools that, if incorporated into MNCs design strategies, could help realize various new and exciting MNC-based avenues that maximize the utilization of the AIE phenomenon. Indeed, leveraging the aggregation strategies from the AIE community with the judicious use of various covalent and noncovalent interactions has been demonstrated to be effective for constructing several MNC-based hybrid assemblies with enhanced AIE characteristics. In this Perspective, we summarize the key driving forces and routes of MNC assembly together with their impact on deciphering the working mechanism behind the AIE process. These strategies can inspire the design of highly luminescent MNC-based hierarchical functional materials across multiple length scales.

Hydride- and halide-substituted Au9(PH3)83+ nanoclusters: similar absorption spectra disguise distinct geometries and electronic structures

Ligands dramatically affect the electronic structure of gold nanoclusters (NCs) and provide a useful handle to tune the properties required for nanomaterials that have high performance for important functions like catalysis. Recently, questions have arisen about the nature of the interactions of hydride and halide ligands with Au NCs: hydride and halide ligands have similar effects on the absorption spectra of Au₉ NCs, which suggested that the interactions of the two classes of ligands with the Au core may be similar. Here, we elucidate the interactions of halide and hydride ligands with phosphine-protected gold clusters via theoretical investigations. The computed absorption spectra using time-dependent density functional theory are in reasonable agreement with the experimental spectra, confirming that the computational methods are capturing the ligand-metal interactions accurately. Despite the similarities in the absorption spectra, the hydride and halide ligands have distinct geometric and electronic effects. The hydride ligand behaves as a metal dopant and contributes its two electrons to the number of superatomic electrons, while the halides act as electron-withdrawing ligands and do not change the number of superatomic electrons. Clarifying the binding modes of these ligands will aid in future efforts to use ligand derivatization as a powerful tool to rationally design Au NCs for use in functional materials.

[Cu15 (PPh3 )6 (PET)13 ]2+ : a Copper Nanocluster with Crystallization Enhanced Photoluminescence

Due to their atomically precise structure, photoluminescent copper nanoclusters (Cu NCs) have emerged as promising materials in both fundamental studies and technological applications, such as bio-imaging, cell labeling, phototherapy, and photo-activated catalysis. In this work, a facile strategy is reported for the synthesis of a novel Cu NCs coprotected by thiolate and phosphine ligands, formulated as [Cu₁₅ (PPh₃ )₆ (PET)₁₃ ]²⁺ , which exhibits bright emission in the near-infrared (NIR) region (≈720 nm) and crystallization-induced emission enhancement (CIEE) phenomenon. Single crystal X-ray crystallography shows that the NC possesses an extraordinary distorted trigonal antiprismatic Cu₆ core and a, unique among metal clusters, "tri-blade fan"-like structure. An in-depth structural investigation of the ligand shell combined with density functional theory calculations reveal that the extended CH···π and π-π intermolecular ligand interactions significantly restrict the intramolecular rotations and vibrations and, thus, are a major reason for the CIEE phenomena. This study provides a strategy for the controllable synthesis of structurally defined Cu NCs with NIR luminescence, which enables essential insights into the origins of their optical properties.

Understanding the Chemical Insights of Staple Motifs of Thiolate-Protected Gold Nanoclusters

Improving the fundamental understanding of the basic structures of ligand-protected gold nanoclusters is essential to their bottom-up synthesis as well as their further application explorations. The thiolate ligands that cover the central metal core in staple motifs are vital for the stability of the gold clusters. However, the knowledge about the geometrical and bonding characters of the thiolate ligands has not been fully uncovered yet. In this work, density functional theory calculations and molecular orbital analysis are applied to show that the Au atoms in the thiolate ligands are hypervalent. The chemical insights of the linear SAuS configuration as well as the lengthened AuS bond by combining the 3-center 4-electron (3c-4e) model and the well-recognized valence shell electron pair repulsion theory are revealed. Valence bond formulations of the motifs are given to provide more chemical insights, for example, the resonant structures, to show how the thiolate motif forms one covalent bond and one dative covalent bond with the Au core. This work provides a thorough understanding of the structure and bonding pattern of thiolate ligands of Au nanoclusters, which is important for the rational design of ligands-protected Au nanoclusters.

Designing New Metal Chalcogenide Nanoclusters through Atom-by-Atom Substitution

Atom-by-atom substitution is a promising strategy for designing new cluster-based materials, which has been used to generate new gold- and silver-containing clusters. Here, the first study focused on atom-by-atom substitution of Fe and Ni to the core of a well-defined cobalt sulfide superatom [Co₆ S₈ L₆ ]⁺ ligated with triethylphosphine (L = PEt₃ ) to produce [Co₅ MS₈ L₆ ]⁺ (M = Fe, Ni) is reported. Electrospray ionization mass spectrometry confirms the substitution of 1-6 Fe atoms with the single Fe-substituted cluster being the dominant species. The Fe-substituted clusters oxidize in solution to generate dicationic species. In contrast, only a single Ni-substituted cluster is observed, which remains stable as a singly charged species. Collision-induced dissociation experiments indicate the reduced stability of the [Co₅ FeS₈ L₆ ]⁺ toward ligand loss in comparison with the unsubstituted and Ni-substituted counterparts. Density functional theory calculations provide insights into the effect of metal atom substitution on the stability and electronic structures of the clusters. The results indicate that Fe and Ni have a different impact on the electronic structure, optical, and magnetic properties, as well as ligand-core interaction of [Co₆ S₈ L₆ ]. This study extends the atom-by-atom substitution strategy to the metal chalcogenide superatoms providing a direct path toward designing novel atomically precise core-tailored superatoms.