Hoodwinking Cytochrome P450BM3 into Hydroxylating Non-Native Substrates by Exploiting Its Substrate Misrecognition

XFEL crystallography reveals catalytic cycle dynamics during non-native substrate oxidation by cytochrome P450BM3

Cytochrome P450s are haem-containing enzymes, catalysing the regio- and stereospecific oxidation of non-activated hydrocarbons. Among these, the bacterial P450BM3 is a promising biocatalyst due to its high enzymatic activity. Given the significant conformational flexibility of this enzyme, understanding protein-substrate interactions and associated structural dynamics are crucial for designing P450BM3-based biocatalysts. Herein, employing an X-ray free electron laser in combination with freeze-trap crystallography and spectroscopy techniques, we captured the intact structures of engineered P450BM3s in the initial stages of catalysis during styrene epoxidation, in the presence of a decoy molecule. We found that the iron reduction significantly altered the active-site orientation of styrene, driven by structural changes in surrounding helices and hydrogen-bonding networks. Oxygen binding to iron further stabilised its productive orientation, providing a molecular basis for the experimentally observed enzyme kinetics and enantioselectivities. This study reveals the substrate dynamics of a P450 enzyme, showcasing how changes in haem chemistry affect enzyme structure and substrate orientation.

Diverse N-Oxidation of Primary Aromatic Amines Controlled by Engineered P450 Peroxizyme Variants Facilitated by Dual-Functional Small Molecule

Amine oxidation is an important organic reaction for the production of high-value N-containing compounds. However, it is still challenging to control the reactivity of active N-centered radicals to selectively access N-oxidation products. Herein, this study reports the engineering of cytochrome P450BM3 into multifunctional N-oxidizing enzymes with the assistance of dual-functional small molecules (DFSM) to selectively produce N-oxygenation (i.e., p-nitrosobenzene, p-nitrobenzene, and azoxybenzene) and one-electron oxidation products (i.e., oligomeric quinones and azobenzene) from aromatic amines. The best mutant, F87A/T268V/V78T/A82T, exclusively gives p-nitrosobenzene (up to 98% selectivity), whereas the selectivity for p-nitrobenzene is >99% using the mutant F87A/T268V/A82T/I263L. Crystal structure analysis reveals that key mutations and DFSM exert synergistic effects on catalytic promiscuity by controlling the substrate orientation in active center. This study highlights the potential of DFSM-facilitated P450 peroxygenase and peroxidase for the synthesis of N-containing compounds via the controllable oxidation of aromatic amines, substantially expanding the chemical space of P450 enzymes.

Construction of biocatalysts based on P450BM3 for the degradation of non-steroidal anti-inflammatory drugs

Non-steroidal anti-inflammatory drugs (NSAIDs) are widespread pollutants in aquatic environments, posing significant risks to both ecosystems and human health due to their persistence and bioaccumulation. Effective and sustainable degradation methods are urgently required to address this environmental challenge. This study aims to design and optimize a cytochrome P450BM3-based biocatalyst for the rapid and efficient degradation of NSAIDs by direct chemical intervention and protein engineering. The novel biocatalyst achieved efficient biodegradation of four common NSAIDs. Notably, the F87I/T268D mutant achieved 99.22 % degradation of diclofenac (DCF) within 10 min, and degraded meloxicam (MEL) and phenylbutazone (PBZ) at rates of 98.86 % and 90.51 % within 5 min, respectively. Furthermore, the F87G mutant accomplished 99.08 % degradation of acetaminophen (APAP) within just 2 min. The catalytic properties of P450BM3 and its mutants were evaluated through kinetic studies, and potential degradation pathways of the four NSAIDs were proposed in conjunction with UPLC-MS. This study provides a novel biocatalytic approach for the rapid degradation of NSAIDs in aquatic systems, offering considerable environmental benefits for pollution mitigation.

Choose Your Own Adventure: A Comprehensive Database of Reactions Catalyzed by Cytochrome P450 BM3 Variants

Cytochrome P450 BM3 monooxygenase is the topic of extensive research as many researchers have evolved this enzyme to generate a variety of products. However, the abundance of information on increasingly diversified variants of P450 BM3 that catalyze a broad array of chemistry is not in a format that enables easy extraction and interpretation. We present a database that categorizes variants by their catalyzed reactions and includes details about substrates to provide reaction context. This database of >1500 P450 BM3 variants is downloadable and machine-readable and includes instructions to maximize ease of gathering information. The database allows rapid identification of commonly reported substitutions, aiding researchers who are unfamiliar with the enzyme in identifying starting points for enzyme engineering. For those actively engaged in engineering P450 BM3, the database, along with this review, provides a powerful and user-friendly platform to understand, predict, and identify the attributes of P450 BM3 variants, encouraging the further engineering of this enzyme.

An artificial nickel chlorinase based on the biotin-streptavidin technology

Herein, we report on an artificial nickel chlorinase (ANCase) resulting from anchoring a biotinylated nickel-based cofactor within streptavidin (Sav). The resulting ANCase was efficient for the chlorination of diverse C(sp3)-H bonds. Guided by the X-ray analysis of the ANCase, the activity of the artificial chlorinase could be significantly improved. This approach opens interesting perspectives for late-stage functionalization of organic intermediates as it complements biocatalytic chlorination strategies.

Emerging Strategies for Modifying Cytochrome P450 Monooxygenases into Peroxizymes

ConspectusCytochrome P450 monooxygenase is a versatile oxidizing enzyme with great potential in synthetic chemistry and biology. However, the dependence of its catalytic function on the nicotinamide cofactor NAD(P)H and redox partner proteins limits the practical catalytic application of P450 in vitro. An alternative to expensive cofactors is low-cost H2O2, which can be used directly to exploit the catalytic potential of P450s. However, the peroxide shunt pathway is generally inefficient at driving P450 catalysis compared to normal NAD(P)H-dependent activity. Over the last few decades, the scientific community has made continuous efforts to use directed evolution or site-directed mutagenesis to modify P450 monooxygenases into their peroxizyme modes─peroxygenase and peroxidase. Despite significant progress, obtaining efficient P450 peroxizymes remains a huge challenge. Here, we summarize our efforts to modulate peroxizyme activity in P450 monooxygenases and exploit their catalytic applications in challenging selective C-H oxidation, oxygenation, and oxyfunctionalization over the past seven years. We first developed a dual-functional small molecule (DFSM) strategy for transforming P450BM3 monooxygenase into peroxygenase. In this strategy, the typical DFSM, such as N-(ω-imidazolyl)-hexanoyl-l-phenylalanine (Im-C6-Phe), binds to the P450BM3 protein with an anchoring group at one end and plays a general acid-base catalytic role in the activation of H2O2 with an imidazolyl group at the other end. Compared with the O-O homolysis mechanism in the absence of DFSM, the addition of DFSM efficiently enables the heterolytic O-O cleavage of the adduct Fe-O-OH, thus being favored for the formation of active species compound I, which has been demonstrated by combining crystallographic and theoretical calculations. Furthermore, protein engineering showed the unique catalytic performance of DFSM-facilitated P450 peroxygenase for the highly difficult selective oxidation of C-H bonds. This catalytic performance was demonstrated during the chemoselective hydroxylation of gaseous alkanes, regioselective O-demethylation of aryl ethers, highly (R)-enantioselective epoxidation of styrene, and regio- and enantiomerically diverse hydroxylation of alkylbenzenes. Second, we demonstrated that DFSM-facilitated P450BM3 peroxygenase could be effectively switched to an efficient peroxidase mode through mechanism-guided protein engineering of redox-sensitive residues. Utilizing the peroxidase function of P450 enabled the direct nitration of unsaturated hydrocarbons including phenols, aromatic amines, and styrene derivatives, which was not only the P450-catalyzed direct nitration of phenols and aromatic amines for the first time but also the first example of the direct biological nitration of olefins. Finally, we report an H2O2 tunnel engineering strategy to enable peroxygenase activity in several different P450 monooxygenases for the first time, providing a general approach for accessing engineered P450 peroxygenases. In this Account, we highlight the emerging strategies we have developed for producing practical P450 peroxizyme biocatalysts. Although the DFSM strategy is primarily applied to P450BM3 to date, both strategies of redox-sensitive residue engineering and H2O2 tunnel engineering show great potential to extend to other P450s. These strategies have expanded the scope of applications of P450 chemistry and catalysis. Additionally, they provide a unique solution to the challenging selective oxidation of inert C-H bonds in synthetic chemistry.

An engineered thermally tolerant apo-cytochrome scaffold for metal-less incorporation of heme derivative

Cytochrome c552 from Thermus thermophilus is one of the hot topics for creating smart biomaterials as it possesses remarkable stability, is tolerant to multiple mutations and has therefore been recently reported for a number of functionalizations upon substitution of the original prosthetic group with an artificial prosthetic group. However, all of the substitutions were driven by the coordination through the axial ligands followed by complete reconstitution with a metal-porphyrin complex. This limits the scope of the cytochrome c for incorporating a metal-less non-natural heme species that could improve the versatility of cytochrome c for a new generation of engineered cytochrome proteins for further enhancement in their functionalities such as biocatalysts. In this connection, a new variant of Cytochrome c (rC552 C14A) from Thermus thermophilus was reported, where an easy approach to remove the original prosthetic group was achieved, followed by the incorporation of a number of metal-PPIX derivatives that ultimately led to the formation of artificial c-type cytochromes through covalent bonding. The apo-cytochrome was found to be thermally tolerant and to possess a distinctive overall structure as that of the wild type, as was evident from the corresponding CD spectra, which ultimately encouraged reconstitution with a metal-less protoporphyrin derivative for better understanding the role of axial ligands in the reconstitution process. Successful reconstitution was achieved, resulting in a new type of Cytochrome b-type artificial protein without the metal in its active site, indicating the non-involvement of the axial ligand. In order to prove the non-involvement of the axial ligand, a subsequent double mutant (C14A/M69A) was constructed, replacing the methionine at 69 position with non-coordinating alanine residue. Accordingly, the apo-C14A/M69A was prepared and found to be extremely stable as the earlier mutants and the WT showed no signs of denaturation, even at the elevated temperature of 98°C. Subsequently, heme b was successfully incorporated into the apo-C14A/M69A, which demonstrated itself as a highly thermally tolerant protein scaffold for incorporating a metal-less artificial prosthetic group in the absence of the axial ligand. Further improvement in the reconstitution process is achieved by replacing the methionine at 69 position with phenyl alanine (C14A/M69F mutant), resulting in further stabilization of heme species, possibly through non-covalent π-interactions, as corroborated by molecular docking.

The Nature of the Chemical Bonds of High-Valent Transition-Metal Oxo (M=O) and Peroxo (MOO) Compounds: A Historical Perspective of the Metal Oxyl-Radical Character by the Classical to Quantum Computations

This review article describes a historical perspective of elucidation of the nature of the chemical bonds of the high-valent transition metal oxo (M=O) and peroxo (M-O-O) compounds in chemistry and biology. The basic concepts and theoretical backgrounds of the broken-symmetry (BS) method are revisited to explain orbital symmetry conservation and orbital symmetry breaking for the theoretical characterization of four different mechanisms of chemical reactions. Beyond BS methods using the natural orbitals (UNO) of the BS solutions, such as UNO CI (CC), are also revisited for the elucidation of the scope and applicability of the BS methods. Several chemical indices have been derived as the conceptual bridges between the BS and beyond BS methods. The BS molecular orbital models have been employed to explain the metal oxyl-radical character of the M=O and M-O-O bonds, which respond to their radical reactivity. The isolobal and isospin analogy between carbonyl oxide R2C-O-O and metal peroxide LFe-O-O has been applied to understand and explain the chameleonic chemical reactivity of these compounds. The isolobal and isospin analogy among Fe=O, O=O, and O have also provided the triplet atomic oxygen (3O) model for non-heme Fe(IV)=O species with strong radical reactivity. The chameleonic reactivity of the compounds I (Cpd I) and II (Cpd II) is also explained by this analogy. The early proposals obtained by these theoretical models have been examined based on recent computational results by hybrid DFT (UHDFT), DLPNO CCSD(T0), CASPT2, and UNO CI (CC) methods and quantum computing (QC).

Artificial Metalloenzyme-Catalyzed Enantioselective Amidation via Nitrene Insertion in Unactivated C(sp3)-H Bonds

Enantioselective C-H amidation offers attractive means to assemble C-N bonds to synthesize high-added value, nitrogen-containing molecules. In recent decades, complementary enzymatic and homogeneous-catalytic strategies for C-H amidation have been reported. Herein, we report on an artificial metalloenzyme (ArM) resulting from anchoring a biotinylated Ir-complex within streptavidin (Sav). The resulting ArM catalyzes the enantioselective amidation of unactivated C(sp3)-H bonds. Chemogenetic optimization of the Ir cofactor and Sav led to significant improvement in both the activity and enantioselectivity. Up to >700 TON and 92% ee for the amidation of unactivated C(sp3)-H bonds was achieved. The single crystal X-ray analysis of the artificial nitrene insertase (ANIase) combined with quantum mechanics-molecular mechanics (QM-MM) calculations sheds light on critical second coordination sphere contacts leading to improved catalytic performance.

A one-pot Pd- and P450-catalyzed chemoenzymatic synthesis of a library of oxyfunctionalized biaryl alkanoic acids leveraging a substrate anchoring approach

A one-pot chemoenzymatic approach was developed by combining Palladium-catalysis with selective cytochrome P450 enzyme oxyfunctionalization. Various iodophenyl alkanoic acids could be coupled with alkylphenyl boronic acids to generate a series of alkyl substituted biarylalkanoic acids in overall high yield. The identity of the products could be confirmed by various analytical and chromatographic techniques. Addition of an engineered cytochrome P450 heme domain mutant with peroxygenase activity upon completion of the chemical reaction resulted in the selective oxyfunctionalization of those compounds, primarily at the benzylic position. Moreover, in order to increase the biocatalytic product conversion, a reversible substrate engineering approach was developed. This involves the coupling of a bulky amino acid such as L- phenylalanine or tryptophan, to the carboxylic acid moiety. The approach resulted in a 14 to 49% overall biocatalytic product conversion increase associated with a change in regioselectivity of hydroxylation towards less favored positions.

Investigating the applicability of the CYP102A1-decoy-molecule system to other members of the CYP102A subfamily

Cytochrome P450 enzymes (CYPs) have attracted much promise as biocatalysts in a push for cleaner and more environmentally friendly catalytic systems. However, changing the substrate specificity of CYPs, such as CYP102A1, can be a challenging task, requiring laborious mutagenesis. An alternative approach is the use of decoy molecules that "trick" the enzyme into becoming active by impersonating the native substrate. Whilst the decoy molecule system has been extensively developed for CYP102A1, its general applicability for other CYP102-family enzymes has yet to be shown. Herein, we demonstrate that decoy molecules can "trick" CYP102A5 and A7 into becoming active and hydroxylating non-native substrates. Furthermore, significant differences in decoy molecule selectivity as well as decoy molecule binding were observed. The X-ray crystal structure of the CYP102A5 haem domain was solved at 2.8 Å, delivering insight into a potential substate-binding site that differs significantly from CYP102A1.

A Compound I Mimic Reveals the Transient Active Species of a Cytochrome P450 Enzyme: Insight into the Stereoselectivity of P450-Catalysed Oxidations

Catching the structure of cytochrome P450 enzymes in flagrante is crucial for the development of P450 biocatalysts, as most structures collected are found trapped in a precatalytic conformation. At the heart of P450 catalysis lies Cpd I, a short-lived, highly reactive intermediate, whose recalcitrant nature has thwarted most attempts at capturing catalytically relevant poses of P450s. We report the crystal structure of P450BM3 mimicking the state in the precise moment preceding epoxidation, which is in perfect agreement with the experimentally observed stereoselectivity. This structure was attained by incorporation of the stable Cpd I mimic oxomolybdenum mesoporphyrin IX into P450BM3 in the presence of styrene. The orientation of styrene to the Mo-oxo species in the crystal structures sheds light onto the dynamics involved in the rotation of styrene to present its vinyl group to Cpd I. This method serves as a powerful tool for predicting and modelling the stereoselectivity of P450 reactions.

Molecular Dynamics-Derived Descriptor Informs the Impact of Mutation on the Catalytic Turnover Number in Lactonase Across Substrates

Molecular dynamics simulations have been extensively employed to reveal the roles of protein dynamics in mediating enzyme catalysis. However, simulation-derived predictive descriptors that inform the impacts of mutations on catalytic turnover numbers remain largely unexplored. In this work, we report the identification of molecular modeling-derived descriptors to predict mutation effect on the turnover number of lactonase SsoPox with both native and non-native substrates. The study consists of 10 enzyme-substrate complexes resulting from a combination of five enzyme variants with two substrates. For each complex, we derived 15 descriptors from molecular dynamics simulations and applied principal component analysis to rank the predictive capability of the descriptors. A top-ranked descriptor was identified, which is the solvent-accessible surface area (SASA) ratio of the substrate to the active site pocket. A uniform volcano-shaped plot was observed in the distribution of experimental activation free energy against the SASA ratio. To achieve efficient lactonase hydrolysis, a non-native substrate-bound enzyme variant needs to involve a similar range of the SASA ratio to the native substrate-bound wild-type enzyme. The descriptor reflects how well the enzyme active site pocket accommodates a substrate for reaction, which has the potential of guiding optimization of enzyme reaction turnover for non-native chemical transformations.

A Unique P450 Peroxygenase System Facilitated by a Dual-Functional Small Molecule: Concept, Application, and Perspective

Cytochrome P450 monooxygenases (P450s) are promising versatile oxidative biocatalysts. However, the practical use of P450s in vitro is limited by their dependence on the co-enzyme NAD(P)H and the complex electron transport system. Using H₂O₂ simplifies the catalytic cycle of P450s; however, most P450s are inactive in the presence of H₂O₂. By mimicking the molecular structure and catalytic mechanism of natural peroxygenases and peroxidases, an artificial P450 peroxygenase system has been designed with the assistance of a dual-functional small molecule (DFSM). DFSMs, such as N-(ω-imidazolyl fatty acyl)-l-amino acids, use an acyl amino acid as an anchoring group to bind the enzyme, and the imidazolyl group at the other end functions as a general acid-base catalyst in the activation of H₂O₂. In combination with protein engineering, the DFSM-facilitated P450 peroxygenase system has been used in various oxidation reactions of non-native substrates, such as alkene epoxidation, thioanisole sulfoxidation, and alkanes and aromatic hydroxylation, which showed unique activities and selectivity. Moreover, the DFSM-facilitated P450 peroxygenase system can switch to the peroxidase mode by mechanism-guided protein engineering. In this short review, the design, mechanism, evolution, application, and perspective of these novel non-natural P450 peroxygenases for the oxidation of non-native substrates are discussed.

Mitochondria damage in ambient particulate matter induced cardiotoxicity: Roles of PPAR alpha/PGC-1 alpha signaling

Particulate matter (PM) had been associated with cardiotoxicity, while the mechanism of toxicity has yet to be elucidated, with mitochondria dysfunction as a potential candidate. To investigate the potential cardiotoxic effects of ambient PM exposure and assess the damage to cardiac mitochondria, C57/B6 mice were exposed to filtered air or real ambient PM for three or six weeks. Furthermore, to reveal the role of peroxisome proliferators-activated receptor alpha (PPAR alpha) in PM exposure induced cardiotoxicity/mitochondria damage, animals were also co-treated with PPAR alpha agonist WY 14,643 or PPAR alpha antagonist GW 6471. Cardiotoxicity was assessed with echocardiography and histopathology, while mitochondria damage was evaluated with mitochondria membrane potential measurement and transmission electron microscopy. Potential impacts of PM exposure to PPAR alpha signaling were detected with co-immunoprecipitation and western blotting. The results indicated that exposure to ambient PM exposure induced cardiotoxicity in C57/B6 mice, including altered cardiac functional parameters and morphology. Cardiac mitochondria damage is detected, in the form of compromised mitochondria membrane potential and morphology. Molecular investigations revealed disruption of PPAR alpha interaction with peroxisome proliferator-activated receptor gamma coactivator-1A (PGC-1a) as well as altered expression levels of PPAR alpha downstream genes. Co-treatment with WY 14,643 alleviated the observed toxicities, while co-treatment with GW 6471 had mixed results, exaggerating most cardiotoxicity and mitochondrial damage endpoints but alleviating some cardiac functional parameters. Interestingly, WY 14,643 and GW 6471 co-treatment seemed to exhibit similar regulative effects towards PPAR alpha signaling in animals exposed to PM. In conclusion, ambient PM exposure indeed induced cardiotoxicity in C57/B6 mice, in which cardiac mitochondria damage and disrupted PPAR alpha signaling are contributors.

Designer Outer Membrane Protein Facilitates Uptake of Decoy Molecules into a Cytochrome P450BM3-Based Whole-Cell Biocatalyst

We report an OmpF loop deletion mutant, which improves the cellular uptake of external additives into an Escherichia coli whole-cell biocatalyst. Through co-expression of the OmpF mutant with wild-type P450BM3 in the presence of decoy molecules, the yield of the whole-cell biotransformation of benzene could be considerably improved. Notably, with C7AM-Pip-Phe the yield duodecupled from 5.7% to 70%, with 80% phenol selectivity. The benzylic hydroxylation of alkyl- and cycloalkylbenzenes was also examined, and with the aid of decoy molecules, propylbenzene and tetralin were converted to 1-hydroxylated products with 78% yield and 94% ( R ) ee for propylbenzene and 92% yield and 94% ( S ) ee for tetralin. Our results suggest that both the decoy molecule and substrate traverse the artificial channel, synergistically boosting whole-cell bioconversions.

Using Small Molecules to Enhance P450 OleT Enzyme Activity in Situ

Cytochrome P450 OleT is a fatty acid decarboxylase that catalyzes the production of olefins with biofuel and synthetic applications. However, the relatively sluggish catalytic efficiency of the enzyme limits its applications. Here, we report the application of a novel class of benzene containing small molecules to improve the OleT activity. The UV-Vis spectroscopy study and molecular docking results confirmed the high proximity of the small molecules to the heme group of OleT. Up to 6-fold increase of product yield has been achieved in the small molecule-modulated enzymatic reactions. Our work thus sheds the light to the application of small molecules to increase the OleT catalytic efficiency, which could be potentially used for future olefin productions.

Bacterial diterpene synthases prenylate small molecules

The biosynthesis of terpenoid natural products begins with a carbocation-based cyclization or prenylation reaction. While these reactions are mechanistically similar, there are several families of enzymes, namely terpene synthases and prenyltransferases, that have evolved to specifically catalyze terpene cyclization or prenylation reactions. Here, we report that bacterial diterpene synthases, enzymes that are traditionally considered to be specific for cyclization, are capable of efficiently catalyzing both diterpene cyclization and the prenylation of small molecules. We investigated this unique dual reactivity of terpene synthases through a series of kinetic, biocatalytic, structural, and bioinformatics studies. Overall, this study unveils the ability of terpene synthases to catalyze C-, N-, O-, and S-prenylation on small molecules, proposes a substrate decoy mechanism for prenylation by terpene synthases, supports the physiological relevance of terpene synthase-catalyzed prenylation in vivo, and addresses questions regarding the evolution of prenylation function and its potential role in natural products biosynthesis.

Histidine orientation in artificial peroxidase regioisomers as determined by paramagnetic NMR shifts

Fe-Mimochrome VI*a is a synthetic peroxidase and peroxygenase, featuring two different peptides that are covalently-linked to deuteroheme. To perform a systematic structure/function correlation, we purposely shortened the distance between the distal peptide and the heme, allowing for the separation and characterization of two regioisomers. They differ in both His axial-ligand orientation, as determined by paramagnetic NMR shifts, and activity. These findings highlight that synthetic metalloenzymes may provide an efficient tool for disentangling the role of axial ligand orientation over peroxidase activity.

Molecular evolution of a cytochrome P450 for the synthesis of potential antidepressant (2R,6R)-hydroxynorketamine

Saturation mutagenesis at seven first-sphere residues of the cytochrome P450 monooxygenase 154E1 (CYP154E1) from Thermobifida fusca YX was applied to construct a variant with only three substitutions that enabled the effective two-step synthesis of the potential antidepressant (2R,6R)-hydroxynorketamine. A recombinant E. coli whole-cell system was essential for GC/MS based medium-throughput screening and at the same time facilitated the oxidation of the substrate (R)-ketamine at a higher scale for product isolation and subsequent NMR analysis.

Ru(II)-diimine complexes and cytochrome P450 working hand-in-hand

With a growing interest in utilizing visible light to drive biocatalytic processes, several light-harvesting units and approaches have been employed to harness the synthetic potential of heme monooxygenases and carry out selective oxyfunctionalization of a wide range of substrates. While the fields of cytochrome P450 and Ru(II) photochemistry have separately been prolific, it is not until the turn of the 21st century that they converged. Non-covalent and subsequently covalently attached Ru(II) complexes were used to promote rapid intramolecular electron transfer in bacterial P450 enzymes. Photocatalytic activity with Ru(II)-modified P450 enzymes was achieved under reductive conditions with a judicious choice of a sacrificial electron donor. The initial concept of Ru(II)-modified P450 enzymes was further improved using protein engineering, photosensitizer functionalization and was successfully applied to other P450 enzymes. In this review, we wish to present the recent contributions from our group and others in utilizing Ru(II) complexes coupled with P450 enzymes in the broad context of photobiocatalysis, protein assemblies and chemoenzymatic reactions. The merging of chemical catalysts with the synthetic potential of P450 enzymes has led to the development of several chemoenzymatic approaches. Moreover, strained Ru(II) compounds have been shown to selectively inhibit P450 enzymes by releasing aromatic heterocycle containing molecules upon visible light excitation taking advantage of the rapid ligand loss feature in those complexes.

Bioinspired design of an artificial peroxidase: introducing key residues of native peroxidases into F43Y myoglobin with a Tyr-heme cross-link

Inspired by the structural features of native peroxidases, an artificial peroxidase was rationally designed using F43Y myoglobin with a Tyr-heme cross-link by further introduction of key residues, including both a distal Arg and a Trp close to the heme group, which exhibits an enhanced peroxidase activity similar to the most efficient native horseradish peroxidase. This study provides a simple approach for design of artificial heme enzymes by the combination of catalytic elements of native enzymes with the post-translational modifications of heme proteins.

Expanding the applicability of cytochrome P450s and other haemoproteins

Cytochrome P450BM3 has long been regarded as a promising candidate for use as a biocatalyst, owing to its excellent efficiency for the hydroxylation of unactivated C-H bonds. However, because of its high substrate specificity, its possible applications have been severely limited. Consequently, various approaches have been proposed to overcome the enzyme's natural limitations, thereby expanding its substrate scope to encompass non-native substrates, evoking chemoselectivity, regioselectivity and stereoselectivity and enabling previously inaccessible chemical conversions. Herein, these approaches will be classified into three categories: (1) mutagenesis including directed evolution, (2) haem substitution with artificial cofactors and (3) use of substrate mimics, 'decoy molecules'. Herein, we highlight the representative work that has been conducted in above three categories for discussion of the future outlook of P450BM3 in green chemistry.

Artificial Metalloenzymes: From Selective Chemical Transformations to Biochemical Applications

Artificial metalloenzymes (ArMs) comprise a synthetic metal complex in a protein scaffold. ArMs display performances combining those of both homogeneous catalysts and biocatalysts. Specifically, ArMs selectively catalyze non-natural reactions and reactions inspired by nature in water under mild conditions. In the past few years, the construction of ArMs that possess a genetically incorporated unnatural amino acid and the directed evolution of ArMs have become of great interest in the field. Additionally, biochemical applications of ArMs have steadily increased, owing to the fact that compartmentalization within a protein scaffold allows the synthetic metal complex to remain functional in a sea of inactivating biomolecules. In this review, we present updates on: 1) the newly reported ArMs, according to their type of reaction, and 2) the unique biochemical applications of ArMs, including chemoenzymatic cascades and intracellular/in vivo catalysis. We believe that ArMs have great potential as catalysts for organic synthesis and as chemical biology tools for pharmaceutical applications.

Control of microenvironment around enzymes by hydrogels

We prepared enzyme-immobilized hydrogels and investigated the effects of the cross-linking density and polymer properties on their oxidation reaction rate. The oxidation rate of enzyme-immobilized hydrogels increased as the cross-linking density in the hydrogels increased. In addition, we controlled the oxidation rate using hydrogels exhibiting an appropriate interaction with a decoy molecule in the hydrogel.

Crystals in Minutes: Instant On-Site Microcrystallisation of Various Flavours of the CYP102A1 (P450BM3) Haem Domain

Despite CYP102A1 (P450BM3) representing one of the most extensively researched metalloenzymes, crystallisation of its haem domain upon modification can be a challenge. Crystal structures are indispensable for the efficient structure-based design of P450BM3 as a biocatalyst. The abietane diterpenoid derivative N-abietoyl-l-tryptophan (AbiATrp) is an outstanding crystallisation accelerator for the wild-type P450BM3 haem domain, with visible crystals forming within 2 hours and diffracting to a near-atomic resolution of 1.22 Å. Using these crystals as seeds in a cross-microseeding approach, an assortment of P450BM3 haem domain crystal structures, containing previously uncrystallisable decoy molecules and diverse artificial metalloporphyrins binding various ligand molecules, as well as heavily tagged haem-domain variants, could be determined. Some of the structures reported herein could be used as models of different stages of the P450BM3 catalytic cycle.

Molecular Dynamics Simulation and Kinetic Study of Fluoride Binding to V21C/V66C Myoglobin with a Cytoglobin-like Disulfide Bond

Protein design is able to create artificial proteins with advanced functions, and computer simulation plays a key role in guiding the rational design. In the absence of structural evidence for cytoglobin (Cgb) with an intramolecular disulfide bond, we recently designed a de novo disulfide bond in myoglobin (Mb) based on structural alignment (i.e., V21C/V66C Mb double mutant). To provide deep insight into the regulation role of the Cys21-Cys66 disulfide bond, we herein perform molecular dynamics (MD) simulation of the fluoride–protein complex by using a fluoride ion as a probe, which reveals detailed interactions of the fluoride ion in the heme distal pocket, involving both the distal His64 and water molecules. Moreover, we determined the kinetic parameters of fluoride binding to the double mutant. The results agree with the MD simulation and show that the formation of the Cys21-Cys66 disulfide bond facilitates both fluoride binding to and dissociating from the heme iron. Therefore, the combination of theoretical and experimental studies provides valuable information for understanding the structure and function of heme proteins, as regulated by a disulfide bond. This study is thus able to guide the rational design of artificial proteins with tunable functions in the future.

Iron- and cobalt-catalyzed C(sp3)–H bond functionalization reactions and their application in organic synthesis

This review highlights the developments in iron and cobalt catalyzed C(sp³)–H bond functionalization reactions with emphasis on their applications in organic synthesis, i.e. natural products and pharmaceuticals synthesis and/or modification.

Rational Design of Artificial Metalloproteins and Metalloenzymes with Metal Clusters

Metalloproteins and metalloenzymes play important roles in biological systems by using the limited metal ions, complexes, and clusters that are associated with the protein matrix. The design of artificial metalloproteins and metalloenzymes not only reveals the structure and function relationship of natural proteins, but also enables the synthesis of artificial proteins and enzymes with improved properties and functions. Acknowledging the progress in rational design from single to multiple active sites, this review focuses on recent achievements in the design of artificial metalloproteins and metalloenzymes with metal clusters, including zinc clusters, cadmium clusters, iron-sulfur clusters, and copper-sulfur clusters, as well as noble metal clusters and others. These metal clusters were designed in both native and de novo protein scaffolds for structural roles, electron transfer, or catalysis. Some synthetic metal clusters as functional models of native enzymes are also discussed. These achievements provide valuable insights for deep understanding of the natural proteins and enzymes, and practical clues for the further design of artificial enzymes with functions comparable or even beyond those of natural counterparts.

Heme: emergent roles of heme in signal transduction, functional regulation and as catalytic centres

Molecular mechanisms of unprecedented functions of exchangeable/labile heme and heme proteins including transcription, DNA binding, protein kinase activity, K⁺ channel functions, cis–trans isomerization, N–N bond formation, and other functions are described.