Water-Soluble Conjugated Organic Molecules as Optical and Electrochemical Materials for Interdisciplinary Biological Applications

Conjugated Polyelectrolyte-Based Sensor Arrays: from Sensing Mechanisms to Artificial Sensory System Conceptualization

In the past decades, conjugated polyelectrolytes (CPEs) have become prominent in sensing applications due to their unique properties, including strong and tunable light absorption, high sensitivity, water solubility, and biocompatibility. Inspired by mammalian olfactory and gustatory systems, CPE-based sensor arrays have made significant strides in discriminating structurally similar analytes and complex mixtures for various applications. This review consolidates recent advancements in CPE-based sensor arrays, highlighting rational design, controllable fabrication, and effective data processing methods. It covers the fundamentals of CPE fluorescence sensing, emphasizing design strategies for sensor array units and data processing techniques. The broad applicability of CPE-based sensor arrays is demonstrated across diverse domains, including environmental monitoring (e.g., detecting metal ions and explosives), medical diagnostics (e.g., sensing disease markers and analyzing biological samples), and food safety (e.g., assessing the freshness, quality, and source of food products). Further, challenges and future directions in the field are discussed to inspire further research and development in this area.

Designing dicationic organic salts and ionic liquids exhibiting high fluorescence in the solid state

Dicationic ionic liquids (DILs) are emerging as a powerful, next-generation approach to designing applied ILs because of their superior physicochemical properties as well as their diverse complexity and tunability for task specific applications. DILs are scarce in the literature compared to monocationic ILs (MILs), and one of their main issues is their expected tendency to possess higher melting temperatures. A series of 1,4-bis[2-(4-pyridyl)ethenyl] benzene and 1,4-bis[2-(2-pyridyl)ethenyl]benzene quaternary salts (Q-BPEBs) with different counterions (bromide, tosylate, and triflimide) and carbon chain lengths (C6, C9, and C12) have been synthesized for their potential as DILs with strong photoluminescent properties in the solid state. All Q-BPEB salts demonstrated robust thermal stabilities as determined by thermogravimetric analysis (TGA). The differential scanning calorimetry (DSC) thermograms for Q-BPEB tosylates and triflimides displayed crystalline polymorphisms before melting transitions as verified by polarizing optical microscopy (POM). The Q-BPEB bromide and tosylate salts all showed high melting points of above >170 °C because of their dicationic rigid structures and strong ionic interactions of their anions. Once the Q-BPEB tosylates were exchanged with triflimide ions, para- isomers 1aTf 2 N, 1bTf 2 N, and 1cTf 2 N still possessed very high melting points (>225 °C), however, the ortho- isomers 2aTf 2 N, 2bTf 2 N, and 2cTf 2 N exhibited melting points lower than 100 °C, classifying them as DILs. Their photoluminescent properties were also studied in methanol with the emission values of λem = 476-482 nm for the para- isomers and those of λem = 448-453 nm for the ortho- isomers. In the solid state, the Q-BPEB salts exhibited strong fluorescence with quantum yields of up to 50 %. The relatively simple synthesis of these fluorescent dicationic organic salts and ILs are pertinent towards the scarcity of these materials in the literature and provide a deeper insight on the design of fluorescent ILs containing more than one charge center.

Solubilization and Photostabilization in a Sodium Deoxycholate Hydrogel of a Neutral Conjugated Thiophene Oligomer and Polymer

Oligo(3-hexylthiophene-co-1,4-phenylene) and poly(3-hexylthiophene) were solubilized in sodium deoxycholate self-assemblies in water solutions and hydrogels, with the goal of solubilizing sufficient material in a hydrogel for fluorescence applications. The neutral conjugated oligomer and polymer were incorporated as monomers into the self-assemblies with sodium deoxycholate aggregates, leading to the photoprotection of these neutral conjugated and water-insoluble molecules. Dynamic light scattering, rheology, and fluorescence experiments established that the deoxycholate aggregation and gel formation properties were not altered with the incorporation of the oligomer or polymer into the deoxycholate self-assemblies, showing that this adaptable host system with some molecular recognition elements is a viable strategy to incorporate into hydrogels neutral conjugated molecules as isolated monomers. This strategy has the potential to be used when conjugated molecules are used for fluorescence applications in hydrogels.

Water-Soluble Small Organic Fluorophores for Oncological Theragnostic Applications: Progress and Development

Cancer is one of the major noncommunicable diseases, responsible for millions of deaths every year worldwide. Though various cancer detection and treatment modalities are available today, many deaths occur owing to its late-stage detection and metastatic nature. Noninvasive detection using luminescence-based imaging tools is considered one of the promising techniques owing to its low cost, high sensitivity, and brightness. Moreover, these tools are unique and valuable as they can detect even the slightest changes in the cellular microenvironment. To achieve this, a fluorescent probe with strong tumor uptake and high spatial and temporal resolution, especially with high water solubility, is highly demanded. Recently, several water-soluble molecules with emission windows in the visible (400-700 nm), first near-infrared (NIR-I, 700-1000 nm), and second near-infrared (NIR-II, 1000-1700 nm) windows have been reported in literature. This review highlights recently reported water-soluble small organic fluorophores/dyes with applications in cancer diagnosis and therapeutics. We systematically highlight and describe the key concepts, structural classes of fluorophores, strategies for imparting water solubility, and applications in cancer therapy and diagnosis, i.e., theragnostics. We discuss examples of water-soluble fluorescent probes based on coumarin, xanthene, boron-dipyrromethene (BODIPY), and cyanine cores. Some other emerging classes of dyes based on carbocyclic and heterocyclic cores are also discussed. Besides, emerging molecular engineering methods to obtain such fluorophores are discussed. Finally, the opportunities and challenges in this research area are also delineated.

Organic Optoelectronic Materials: A Rising Star of Bioimaging and Phototherapy

Recently, many organic optoelectronic materials (OOMs), especially those used in organic light-emitting diodes (OLEDs), organic solar cells (OSCs), and organic field-effect transistors (OFETs), are explored for biomedical applications including imaging and photoexcited therapies. In this review, recently developed OOMs for fluorescence imaging, photoacoustic imaging, photothermal therapy, and photodynamic therapy, are summarized. Relationships between their molecular structures, nanoaggregation structures, photophysical mechanisms, and properties for various biomedical applications are discussed. Mainly four kinds of OOMs are covered: thermally activated delayed fluorescence materials in OLEDs, conjugated small molecules and polymers in OSCs, and charge-transfer complexes in OFETs. Based on the OOMs unique optical properties, including excitation light wavelength and exciton dynamics, they are respectively exploited for suitable biomedical applications. This review is intended to serve as a bridge between researchers in the area of organic optoelectronic devices and those in the area of biomedical applications. Moreover, it provides guidance for selecting or modifying OOMs for high-performance biomedical uses. Current challenges and future perspectives of OOMs are also discussed with the hope of inspiring further development of OOMs for efficient biomedical applications.

Water-dispersible donor-acceptor-donor π-conjugated bolaamphiphiles enabling a humidity-responsive luminescence color change

Novel water-dispersible donor-acceptor-donor π-conjugated bolaamphiphiles, having dibenzophenazine as the acceptor and heteroatom-bridged amphiphilic diarylamines as the donors, have been developed. The materials displayed a distinct photoluminescence color change in response to humidity in a poly(vinylalcohol) matrix.

A comprehensive review on singlet oxygen generation in nanomaterials and conjugated polymers for photodynamic therapy in the treatment of cancer

A key role in lessening humanity's continuous fight against cancer could be played by photodynamic therapy (PDT), a minimally invasive treatment employed in the medical care of a range of benign disorders and malignancies. Cancerous tissue can be effectively removed by using a light source-excited photosensitizer. Singlet oxygen and reactive oxygen species are produced via the photosensitizer as a result of this excitation. In the recent past, researchers have put in tremendous efforts towards developing photosensitizer molecules for photodynamic treatment (PDT) to treat cancer. Conjugated polymers, characterized by their efficient fluorescence, exceptional photostability, and strong light absorption, are currently under scrutiny for their potential applications in cancer detection and treatment through photodynamic and photothermal therapy. Researchers are exploring the versatility of these polymers, utilizing sophisticated chemical synthesis and adaptable polymer structures to create new variants with enhanced capabilities for generating singlet oxygen in photodynamic treatment (PDT). The incorporation of photosensitizers into conjugated polymer nanoparticles has proved to be beneficial, as it improves singlet oxygen formation through effective energy transfer. The evolution of nanotechnology has emerged as an alternative avenue for enhancing the performance of current photosensitizers and overcoming significant challenges in cancer PDT. Various materials, including biocompatible metals, polymers, carbon, silicon, and semiconductor-based nanomaterials, have undergone thorough investigation as potential photosensitizers for cancer PDT. This paper outlines the recent advances in singlet oxygen generation by investigators using an array of materials, including graphene quantum dots (GQDs), gold nanoparticles (Au NPs), silver nanoparticles (Ag NPs), titanium dioxide (TiO2), ytterbium (Yb) and thulium (Tm) co-doped upconversion nanoparticle cores (Yb/Tm-co-doped UCNP cores), bismuth oxychloride nanoplates and nanosheets (BiOCl nanoplates and nanosheets), and others. It also stresses the synthesis and application of systems such as amphiphilic block copolymer functionalized with folic acid (FA), polyethylene glycol (PEG), poly(β-benzyl-L-aspartate) (PBLA10) (FA-PEG-PBLA10) functionalized with folic acid, tetra(4-hydroxyphenyl)porphyrin (THPP-(PNIPAM-b-PMAGA)4), pyrazoline-fused axial silicon phthalocyanine (HY-SiPc), phthalocyanines (HY-ZnPcp, HY-ZnPcnp, and HY-SiPc), silver nanoparticles coated with polyaniline (Ag@PANI), doxorubicin (DOX) and infrared (IR)-responsive poly(2-ethyl-2-oxazoline) (PEtOx) (DOX/PEtOx-IR NPs), particularly in NIR imaging-guided photodynamic therapy (fluorescent and photoacoustic). The study puts forward a comprehensive summary and a convincing justification for the usage of the above-mentioned materials in cancer PDT.

CO2-Responsive Water-Soluble Conjugated Polymers as a Multifunctional Fluorescent Probe for Bioimaging Applications

We describe important progress in the synthesis and development of gas-responsive water-soluble conjugated polymers (WSCPs) with potential as multifunctional fluorescent materials for biomedical imaging and probes. A water-soluble WSCP (I-PT) composed of a hydrophobic fluorescent polythiophene backbone and a hydrophilic imidazole side chain was successfully prepared through a facile and efficient two-step synthetic route. Owing to the repulsive force between the hydrophilic and hydrophobic segments and the highly sensitive carbon dioxide (CO2)- and nitrogen (N2)-responsive imidazole groups in its structure, I-PT can spontaneously self-assemble into spherical-like nanoparticles in an aqueous environment, and thus exhibits unique light absorption and fluorescence properties as well as rapid responsiveness to CO2 and N2. In addition, its structure, optical absorption/fluorescence behavior, and surface potential can be quickly turned on and off through alternating cycles of CO2 and N2 bubbling and exhibit controllable cyclic switching stability, thereby allowing effective manipulation of its hierarchical structure and chemical-physical characteristics. More importantly, a series of in vitro cell experiments confirmed that, compared to the significant cytotoxicity of pristine and N2-treated I-PT nanoparticles, CO2-treated I-PT nanoparticles exhibit extremely low cytotoxicity in normal and cancer cells and undergo greatly accelerated cellular uptake, resulting in a significant increase in the intensity and stability of their fluorescence signal in the intracellular environment. Overall, this newly discovered CO2/N2-responsive system provides new insights to effectively enhance the biocompatibility, cellular internalization, and intracellular fluorescence characteristics of WSCPs and holds great potential for biomedical imaging/sensing applications.

Ultrasensitive and visual detection of genetically modified crops using two primers-induced cascade exponential amplification assay

The increased global cultivation area of genetically modified (GM) crops has caused severe controversies over potential health and environmental risks worldwide. There is an urgent need to verify even trace amount of a particular GM material in products. Herein, a two primers-induced cascade exponential amplification reaction combined with cationic conjugated polymers (CCPs)-based visual detection method is developed for rapid and ultrasensitive detection of GM crops. This method only uses two primers to specifically recognize the four regions of the target gene, which is easier for primer design and probably more suitable for the detection of shorter targets. By integrating the two exponential amplification reactions, as low as 5 pg genomic DNA from GM maize can be accurately detected, which is more sensitive than the single amplification-based methods. Taking advantage of the efficient fluorescence resonance energy transfer (FRET) between CCPs and the commercial fluorescent dye SYBR Green I (SG), our method can differentiate as low as 0.01 % GM maize from a large amount of non-GM maize, which is the most accurate method so far. By changing the two primers according to target gene, our method can be modified to the detection of any other GM materials, indicating that our method is promising to be applied in other GM materials-related testing and screening system.

Real-Time Monitoring of Mitochondrial Damage Using Conjugated Oligoelectrolytes

Conjugated oligoelectrolytes (COEs) comprise a class of fluorescent reporters with tunable optical properties and lipid bilayer affinity. These molecules have proven effective in a range of bioimaging applications; however, their use in characterizing specific subcellular structures remains restricted. Such capabilities would broaden COE applications to understand cellular dysfunction, cell communication, and the targets of different pharmaceutical agents. Here, we disclose a novel COE derivative, COE-CN, which enables the visualization of mitochondria, including morphological changes and lysosomal fusion upon treatment with depolarizing agents. COE-CN is characterized by the presence of imidazolium solubilizing groups and an optically active cyanovinyl-linked distyrylbenzene core with intramolecular charge-transfer characteristics. Our current understanding is that the relatively shorter molecular length of COE-CN leads to weaker binding within lipid bilayer membranes, which allows sampling of internal cellular structures and ultimately to different localization relative to elongated COEs. As a means of practical demonstration, COE-CN can be used to diagnose cells with damaged mitochondria via flow cytometry. Coupled with an elongated COE that does not translocate upon depolarization, changes in ratiometric fluorescence intensity can be used to monitor mitochondrial membrane potential disruption, demonstrating the potential for use in diagnostic assays.

Efficient and Modular Biofunctionalization of Thiophene-Based Conjugated Polymers through Embedded Latent Disulfide

Biofunctionalized conjugated polymers (i.e., carrying enzymes, antibodies, and nucleic acids) are of great interest for many biological applications, yet efficient biofunctionalization of conjugated polymers under biocompatible conditions is challenging. We report a facile strategy to make biofunctionalized conjugated polymers through thiol-ene chemistry with embedded latent disulfide functional groups. This is made possible through the design of a cyclic disulfide-containing dioxythiophene, which can be integrated into a series of conjugated polymers via acid-catalyzed chain-growth polymerization. The utility of such a biofunctionalized polymer with glucose oxidase has been examined in organic electrochemical transistors for the selective sensing of glucose. This work provides a venue for the creation of biofunctional organic semiconductors.

Conjugated Polymer Composite Nanoparticles Augmenting Photosynthesis-Based Light-Triggered Hydrogel Promotes Chronic Wound Healing

Diabetic chronic wounds are characterized by local hypoxia, impaired angiogenesis, and bacterial infection. In situ, self-supply of dissolved oxygen combined with the elimination of bacteria is urgent and challenging for chronic nonhealing wound treatment. Herein, an oxygen-generating system named HA-L-NB/PFE@cp involving biological photosynthetic chloroplasts (cp)/conjugated polymer composite nanoparticles (PFE-1-NPs@cp) and light-triggered hyaluronic acid-based (HA-L-NB) hydrogel for promoting diabetic wound healing is introduced. Briefly, conjugated polymer nanoparticles (PFE-1-NPs) possess unique light harvesting ability, which accelerates the electron transport rates in photosystem II (PS II) by energy transfer, elevating photosynthesis beyond natural chloroplasts. The enhanced release of oxygen can greatly relieve hypoxia, promote cell migration, and favor antibacterial photodynamic therapy. Additionally, the injectable hydrogel precursors are employed as a carrier to deliver PFE-1-NPs@cp into the wound. Under light irradiation, they quickly form a gel by S-nitrosylation coupling reaction and in situ anchor on tissues through amine-aldehyde condensation. Both in vitro and in vivo assays demonstrate that the oxygen-generating system can simultaneously relieve wound hypoxia, eliminate bacteria, and promote cell migration, leading to the acceleration of wound healing. This study provides a facile approach to develop an enhanced oxygen self-sufficient system for promoting hypoxic tissue, especially diabetic wound healing.

Composite Nanomaterials of Conjugated Polymers and Upconversion Nanoparticles for NIR-Triggered Photodynamic/Photothermal Synergistic Cancer Therapy

Phototherapies such as photodynamic therapy (PDT) and photothermal therapy (PTT) have attracted great attention in the field of cancer treatment. However, the individual PDT or PTT makes it difficult to achieve optimal antitumor effects compared to the PDT/PTT combined therapy. Also, the effect of PDT is usually limited by the penetration depth of the UV-vis light source. Herein, we designed and synthesized novel composite nanoparticles UCNPs-CPs, which are constructed from two conjugated polymers and upconversion nanoparticles β-NaYF4:Yb,Tm (UCNPs) via a coordination reaction. By virtue of the excellent spectral overlap between absorption of conjugated polymers and emission of UCNPs, the UCNPs can absorb NIR light and effectively excite conjugated polymers by energy transfer to produce massive reactive oxygen species under 980 nm excitation and heat energy under 808 nm laser irradiation, achieving photodynamic/photothermal synergistic therapy. The in vitro cellular investigation proves that the dual modal phototherapy exhibits enhanced antitumor ability compared to single PDT or PTT. Furthermore, UCNPs-CPs inhibit tumor growth 100% in a 4T1 breast tumor mice model with both NIR laser irradiation, indicating that UCNPs-CPs is an excellent platform for synergistic PDT/PTT treatment. Thus, this study provides a promising strategy for NIR-triggered dual modal phototherapy.

Beyond External Light: On-Spot Light Generation or Light Delivery for Highly Penetrated Photodynamic Therapy

External light sources, such as lasers, light emitting diodes (LEDs) and lamps, are widely applied in photodynamic therapy (PDT); however, their use is severely limited by the nature of shallow tissue penetration depth. The recent exploration of light delivery or local generation on tumor sites has attracted much attention, owing to the fact that these systems are significantly endowed with high tissue penetration. In this review, we briefly introduced the principle of "on-spot light generation or delivery systems" in PDT. These systems are divided into different categories: (1) implantable luminescence, (2) mechanoluminescence, (3) electrochemiluminescence, (4) Cerenkov luminescence, (5) chemiluminescence, and (6) bioluminescence. Finally, their applications, advantages, and disadvantages in PDT will be appropriately summarized and further discussed in detail. We believe that this review will provide general guidance for the further design of light generation or delivery systems and clinical studies for PDT-mediated cancer treatments with unparalleled merits.

Sequence-Defined Conjugated Oligomers in Donor-Acceptor Dyads

Conjugated macromolecules have a rich history in chemistry, owing to their chemical arrangements that intertwine physical and electronic properties. The continuing study and application of these systems, however, necessitates the development of atomically precise models that bridge the gap between molecules, polymers, and/or their blends. One class of conjugated polymers that have facilitated the advancement of structure-property relationships is discrete, precision oligomers that have remained an outstanding synthetic challenge with only a handful of reported examples. Here we show the first synthesis of molecular dyads featuring sequence-defined oligothiophene donors covalently linked a to small-molecule acceptor. These dyads serve as a platform for probing complex photophysical interactions involving sequence-defined oligomers. This assessment is facilitated through the unprecedented control of oligothiophene length- and sequence-dependent arrangement relative to the acceptor unit, made possible by the incorporation of hydroxyl-containing side chains at precise positions along the backbone through sequence-defined oligomerizations. We show that both the oligothiophene sequence and length play complementary roles in determining the transfer efficiency of photoexcited states. Overall, the work highlights the importance of the spatial arrangement of donor-acceptor systems that are commonly studied for a range of uses, including light harvesting and photocatalysis.

Application of conjugated materials in sports training

In recent years, with the rapid development of the sports industry, the quality of sports training products on the market is uneven. Problems such as inaccurate detection of athletes' physical indicators, low comfort of sportswear, and reduced satisfaction with sports equipment often occur. To this end, this article proposes to apply conjugated materials with excellent optical, electrical, thermal and other properties to sports training and sports products, by summarizing the properties of conjugated materials and their applications in sports training, explores the potential of conjugated materials in improving athletes' training effects, monitoring sports status, and improving sports equipment. This article rates the application of conjugated materials in sports training products in terms of comfort, waterproofness, portability, lightness, aesthetics and breathability. The results showed that the average scores of the 20 sports participants on sportswear were 9.0475, 9.0075, 9.01, 9.025, 9.0325 and 9.04 respectively; the average scores on sports shoes were 9.035, 9.055, 9.02, 9.085, 9.0175 and 8.9975 respectively. Research shows that applying conjugated materials to sports training can improve athletes' performance and contribute to the better development of sports.

Application of water-soluble conjugated polymers in intelligent measurement and control of food microbial fermentation process

In order to reduce the difficulty of measurement and control (MAC) during food fermentation, this paper applies water-soluble conjugated polymers to sensors, conducts data modeling and prediction, and integrates the sensors into intelligent MAC systems. This article uses fermentation rate, product yield, and energy consumption efficiency as evaluation indicators to analyze the effectiveness of smart MAC. By comparing and analyzing the MAC method based on water-soluble conjugated polymers with the traditional MAC method, this article found that the MAC method based on water-soluble conjugated polymers can improve product yield, fermentation efficiency and energy utilization compared with traditional MAC methods. The MAC accuracy, timeliness, stability, speed and security of the MAC system based on water-soluble conjugated polymers are higher than those of traditional MAC systems. Among them, the average test stability of the traditional MAC system is 19.93% lower than that of the smart MAC system based on water-soluble conjugated polymers. Research shows that the intelligent MAC method based on water-soluble conjugated polymers can effectively improve the fermentation environment of food microorganisms and improve product quality, and is worthy of further promotion.

Recent Progress of Photothermal Therapy Based on Conjugated Nanomaterials in Combating Microbial Infections

Photothermal therapy has the advantages of non-invasiveness, low toxicity, simple operation, a broad spectrum of antibacterial ability, and non-proneness to developing drug resistance, which provide it with irreplaceable superiority in fighting against microbial infection. The effect of photothermal therapy is closely related to the choice of photothermal agent. Conjugated nanomaterials are potential candidates for photothermal agents because of their easy modification, excellent photothermal conversion efficiency, good photostability, and biodegradability. In this paper, the application of photothermal agents based on conjugated nanomaterials in photothermal antimicrobial treatment is reviewed, including conjugated small molecules, conjugated oligomers, conjugated polymers, and pseudo-conjugated polymers. At the same time, the application of conjugated nanomaterials in the combination of photothermal therapy (PTT) and photodynamic therapy (PDT) is briefly introduced. Finally, the research status, limitations, and prospects of photothermal therapy using conjugated nanomaterials as photothermal agents are discussed.

Application of conjugated materials in muscle movement recovery process

Conjugate materials have a good application effect in muscle movement recovery. This article aims to provide more references for the practical application of conjugated materials in sports recovery. This paper takes the students of the local physical education college as the experimental object, and selects the students who have sports muscle fatigue or injury for the test. In this paper, they are randomly divided into two groups: the experimental group and the control group, with 19 students in each group. The experimental group used the conjugate material in this paper for muscle movement recovery, while the control group used the traditional method for muscle movement recovery. This paper tested the peak torque, total work done, maximum radial displacement, and contraction time of two groups of students after initial exercise and muscle recovery. The experimental results showed that after 80 h of muscle movement recovery, the peak torque values of isometric contraction (264.59) and concentric contraction (160.81) of students in the experimental group were higher than those of students in the control group (233.79) and concentric contraction (130.43), and the difference was statistically significant (p < 0.05); the isometric contraction time (30.02) and concentric contraction time (29.31) of the experimental group were also higher than those of the control group (27.31) and concentric contraction time (24.58), which was statistically significant (p < 0.05). This study shows that conjugated materials have a significant effect on promoting muscle recovery. They not only help to increase the peak torque of muscle isometric contraction and concentric contraction, but also increase the time of muscle contraction and improve muscle mass.

Alignment and photooxidation dynamics of a perylene diimide chromophore in lipid bilayers

We present a method of enabling photochemical reactions in water by using biomimetic, water-soluble liposomes and a specifically functionalized perylene diimide chromophore. Linking two flexible saturated C4-alkyl chains with terminal positively charged trimethylammonium groups to the rigid perylene diimide core yielded [1]²⁺ allowing for its co-assembly at the lipid bilayer interface of DOPG liposomes (DOPG = 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol)) with a preferred orientation and in close proximity to the water interface. According to molecular dynamics simulations the chromophore aligns preferably parallel to the membrane surface which is supported by confocal microscopy. Irradiation experiments with visible light and in the presence of a negatively charged, water-soluble oxidant were slower in the DOPG-membrane than under acetonitrile-water reaction conditions. The generated radical species was characterized by EPR spectroscopy in an acetonitrile-water mixture and associated to the DOPG-membrane. Time-resolved emission studies revealed a static quenching process for the initial electron transfer from photoexcited [1]²⁺ to the water soluble oxidant. The findings presented in this study yield design principles for the functionalization of lipid bilayer membranes which will be relevant for the molecular engineering of artificial cellular organelles and nano-reactors based on biomimetic vesicles and membranes.

Conjugated Polymeric Materials in Biological Imaging and Cancer Therapy

Conjugated polymers (CPs) have attracted much attention in the fields of chemistry, medicine, life science, and material science. Researchers have carried out a series of innovative researches and have made significant research progress regarding the unique photochemical and photophysical properties of CPs, expanding the application range of polymers. CPs are polymers formed by the conjugation of multiple repeating light-emitting units. Through precise control of their structure, functional molecules with different properties can be obtained. Fluorescence probes with different absorption and emission wavelengths can be obtained by changing the main chain structure. By modifying the side chain structure with water-soluble groups or selective recognition molecules, electrostatic interaction or specific binding with specific targets can be achieved; subsequently, the purpose of selective recognition can be achieved. This article reviews the research work of CPs in cell imaging, tumor diagnosis, and treatment in recent years, summarizes the latest progress in the application of CPs in imaging, tumor diagnosis, and treatment, and discusses the future development direction of CPs in cell imaging, tumor diagnosis, and treatment.

Induced Self-Assembly and Disassembly of Alkynylplatinum(II) 2,6-Bis(benzimidazol-2'-yl)pyridine Complexes with Charge Reversal Properties: "Proof-of-Principle" Demonstration of Ratiometric Förster Resonance Energy Transfer Sensing of pH

A series of pH-responsive alkynylplatinum(II) 2,6-bis(benzimidazol-2'-yl)pyridine (bzimpy) complexes with charge-reversal properties was synthesized, and the supramolecular assemblies between conjugated polyelectrolyte, PFP-OSO₃^-, and [Pt{bzimpy(TEG)₂}{C≡C-C₆H₃-(COOH)₂-3,5}]Cl (1) have been studied using UV-vis absorption, emission, and resonance light scattering (RLS) spectroscopy. An efficient Förster resonance energy transfer (FRET) from PFP-OSO₃^- donor to the aggregated 1 as acceptor with the aid of Pt(II)···Pt(II) interactions has been presented, which leads to a growth of triplet metal-metal-to-ligand charge transfer (³MMLCT) emission in the low-energy red region. The two-component PFP-OSO₃^--1 ensemble was then exploited as a "proof-of-principle" concept strategy for pH sensing by tracking the ratiometric emission changes. With the aid of judicious molecular design on the pH-driven charge-reversal property, the polyelectrolyte-induced self-assembly and the FRET from PFP-OSO₃^- to the platinum(II) aggregates have been modulated. Together with its excellent reversibility and photostability, the extra stability provided by the Pt(II)···Pt(II) and π-π stacking interactions on top of the electrostatic and hydrophobic interactions existing in polyelectrolye-complex assemblies has led to a selective and sensitive pH sensing assay.

Water-soluble graphene quantum dot-based polymer nanoparticles with internal donor/acceptor heterojunctions for efficient and selective detection of cancer cells

We present a new, insightful donor-acceptor (D-A) energy transfer-based strategy for the preparation and development of water-soluble multifunctional pH-responsive heterojunction nanoparticles. Hydrophilic tertiary amine-grafted polythiophene (WPT) as a donor and blue fluorescent graphene quantum dots (GQD) as an acceptor spontaneously form co-assembled nanoparticles that function as a highly pH-sensitive and efficient biosensor appropriate for the detection of cancer cells. These WPT/GQD nanoparticles exhibit a number of unique physical characteristics-such as broad-range, tunable GQD-loading contents and particle sizes, extremely low cytotoxicity in normal and cancer cells, and highly sensitive pH-responsiveness and rapid acid-triggered fluorescent behavior under aqueous acidic conditions. We show these features are conferred by self-aggregation of the GQD within the nanoparticles and subsequent aggregation-induced fluorescence of GQD after disassembly of the nanoparticles and dissociation of the D-A interactions under acidic conditions. Importantly, in vitro fluorescence imaging experiments clearly demonstrated the WPT/GQD nanoparticles were gradually taken up into normal and cancer cells in vitro. Selective formation of GQD aggregates subsequently occurred in the acidic microenvironment of the cancer cells and the interior of the cancer cells exhibited strong blue fluorescence; these phenomena did not occur in normal cells. In contrast, pristine WPT and GQD did not exhibit cellular microenvironment-triggered fluorescence transitions in cancer or normal cell lines. Therefore, this newly discovered water-soluble heterojunction system may represent a strongly fluorescent highly pH-sensitive bioprobe for rapid detection of cancer cells.

Aptamers Targeting Membrane Proteins for Sensor and Diagnostic Applications

Many biological processes (physiological or pathological) are relevant to membrane proteins (MPs), which account for almost 30% of the total of human proteins. As such, MPs can serve as predictive molecular biomarkers for disease diagnosis and prognosis. Indeed, cell surface MPs are an important class of attractive targets of the currently prescribed therapeutic drugs and diagnostic molecules used in disease detection. The oligonucleotides known as aptamers can be selected against a particular target with high affinity and selectivity by iterative rounds of in vitro library evolution, known as Systematic Evolution of Ligands by EXponential Enrichment (SELEX). As an alternative to antibodies, aptamers offer unique features like thermal stability, low-cost, reuse, ease of chemical modification, and compatibility with various detection techniques. Particularly, immobilized-aptamer sensing platforms have been under investigation for diagnostics and have demonstrated significant value compared to other analytical techniques. These "aptasensors" can be classified into several types based on their working principle, which are commonly electrochemical, optical, or mass-sensitive. In this review, we review the studies on aptamer-based MP-sensing technologies for diagnostic applications and have included new methodological variations undertaken in recent years.

Water-soluble conjugated polymers for bioelectronic systems

Bioelectronics is an interdisciplinary field of research that aims to establish a synergy between electronics and biology. Contributing to a deeper understanding of bioelectronic processes and the built bioelectronic systems, a variety of new phenomena, mechanisms and concepts have been derived in the field of biology, medicine, energy, artificial intelligence science, etc. Organic semiconductors can promote the applications of bioelectronics in improving original performance and creating new features for organisms due to their excellent photoelectric and electrical properties. Recently, water-soluble conjugated polymers (WSCPs) have been employed as a class of ideal interface materials to regulate bioelectronic processes between biological systems and electronic systems, relying on their satisfying ionic conductivity, water-solubility, good biocompatibility and the additional mechanical and electrical properties. In this review, we summarize the prominent contributions of WSCPs in the aspect of the regulation of bioelectronic processes and highlight the latest advances in WSCPs for bioelectronic applications, involving biosynthetic systems, photosynthetic systems, biophotovoltaic systems, and bioelectronic devices. The challenges and outlooks of WSCPs in designing high-performance bioelectronic systems are also discussed.

Impact of Electron-Donating Groups on Attaining Dual-Emitting Imidazole-Based Donor-Acceptor Materials

Imidazole-based donor-acceptor materials are well known for their polarity-controlled trade-off phenomenon between the localized excitation-based short-wavelength (SW) emission in nonpolar solvents and charge transfer dominated long-wavelength (LW) emission in polar solvents. To attain concurrent SW- and LW-based dual-emission characteristics, a series of imidazole-based donor-acceptor fluorophores (CBImDCN, TPImDCN, PZImDCN) possessing different electron-donating groups such as carbazole, triphenylamine, and phenothiazine linked via the N-position of the imidazole core unit were synthesized and verified by NMR and mass spectroscopic techniques. As a result, the strong donating TPImDCN and PZImDCN exhibited dual emission in different solvents of varying polarity, covering the blue (SW) and green/orange (LW) regions. On the other hand, in contrast, only an SW emission band is observed with the weak donating CBImDCN. Moreover, PZImDCN shows panchromatic emission under 365 nm illumination, while only orange color emission is observed under visible light excitation, revealing two different origins of SW and LW emissions, as also evidenced from DFT calculations. Overall, this work reveals a new approach for attaining concurrent SW and LW emission characteristics from imidazole-based D-A materials and sheds light on the design and development of novel panchromatic emitters with intriguing properties for lighting and display applications.

A Strategy of On-Demand Immune Activation for Antifungal Treatment Using Near-Infrared Responsive Conjugated Polymer Nanoparticles

Pathogenic fungal infection is a major clinical threat because pathogenic fungi have developed resistant mechanisms to evade the innate immune response, especially interactions with macrophages. Herein, a strategy to activate immune responses of macrophages to fungi based on near-infrared (NIR) responsive conjugated polymer nanoparticles (CPNs-M) is reported for antifungal immunotherapy. Under NIR light irradiation, CPNs-M exposes β-glucan on the surface of fungal conidia by photothermal damage and drug released from CPNs-M. The exposed β-glucan elicits macrophage recognition and subsequently activates calcium-calmodulin (Ca²⁺-CaM) signaling followed by the LC3-associated phagocytosis (LAP) pathway to kill fungal conidia. Consequently, a remarkable elimination of intracellular fugal conidia and successful treatment of fungal pneumonia are achieved. This remote regulation strategy to restore pathogen-immune cell interaction on demand provides a new insight into combatting intractable intracellular infections.

A Label-Free, Mix-and-Detect ssDNA-Binding Assay Based on Cationic Conjugated Polymers

The accurate, simple, and efficient measurement of the concentration of single-stranded DNA (ssDNA) is important for many analytical applications, such as DNA adsorption, biosensor design, and disease diagnosis, but it is still a challenge. Herein, we studied a cationic conjugated polymer (CCP)-based ssDNA assay taking advantage of the obvious fluorescence change of CCPs upon binding ssDNA. Poly(3-(3'-N,N,N-triethylamino-1'-propyloxy)-4-methyl-2,5-thiophene hydrochloride) (PMNT) achieved an apparent dissociation constant (K_d) of 57 ± 4 nM for ssDNA, indicating a very high binding affinity between PMNT and ssDNA. This allowed us to develop a CCP-based ssDNA biosensor with a detection limit of 0.6 nM, similar to the fluorescence-dye-based method using SYBR Green I and SYBR Gold. Our CCP-based biosensor produced smaller differences among ssDNA samples with different base compositions. In addition, the existence of double-stranded DNA (dsDNA) at different concentrations did not interfere with the fluorescence of PMNT, indicating that our CCP-based biosensor was more suitable for the measurement of ssDNA. Compared with fluorescence-intensity-based quantification, our CCP system allowed ratiometric quantification, which made the calibration easier and more robust. We then applied our method to the quantification of ssDNA on AuNPs using both unmodified and thiolated ssDNA, and the accurate quantification of ssDNA was achieved without any fluorophore modification. This method provides an alternative approach for the measurement of ssDNA.

Polymerization-Enhanced Photophysical Performances of AIEgens for Chemo/Bio-Sensing and Therapy

AIE polymers have been extensively researched in the fields of OLEDs, sensing, and cancer treatment since its first report in 2003, which have achieved numerous breakthroughs during the years. In comparison with small molecules, it can simultaneously combine the unique advantages of AIE materials and the polymer itself, to further enhance their corresponding photophysical performances. In this review, we enumerate and discuss the common construction strategies of AIE-active polymers and summarize the progress of research on polymerization enhancing luminescence, photosensitization, and room-temperature phosphorescence (RTP) with their related applications in chemo/bio-sensing and therapy. To conclude, we also discuss current challenges and prospects of the field for future development.

Electronic, redox, and optical property prediction of organic π-conjugated molecules through a hierarchy of machine learning approaches

Accelerating the development of π-conjugated molecules for applications such as energy generation and storage, catalysis, sensing, pharmaceuticals, and (semi)conducting technologies requires rapid and accurate evaluation of the electronic, redox, or optical properties. While high-throughput computational screening has proven to be a tremendous aid in this regard, machine learning (ML) and other data-driven methods can further enable orders of magnitude reduction in time while at the same time providing dramatic increases in the chemical space that is explored. However, the lack of benchmark datasets containing the electronic, redox, and optical properties that characterize the diverse, known chemical space of organic π-conjugated molecules limits ML model development. Here, we present a curated dataset containing 25k molecules with density functional theory (DFT) and time-dependent DFT (TDDFT) evaluated properties that include frontier molecular orbitals, ionization energies, relaxation energies, and low-lying optical excitation energies. Using the dataset, we train a hierarchy of ML models, ranging from classical models such as ridge regression to sophisticated graph neural networks, with molecular SMILES representation as input. We observe that graph neural networks augmented with contextual information allow for significantly better predictions across a wide array of properties. Our best-performing models also provide an uncertainty quantification for the predictions. To democratize access to the data and trained models, an interactive web platform has been developed and deployed.

Membrane-intercalating conjugated oligoelectrolytes

By acting as effective biomimetics of the lipid bilayers, membrane-intercalating conjugated oligoelectrolytes (MICOEs) can spontaneously insert themselves into both synthetic lipid bilayers and biological membranes. The modular and intentional molecular design of MICOEs enable a range of applications, such as bioproduction, biocatalysis, biosensing, and therapeutics. This tutorial review provides a structural evolution of MICOEs, which originated from the broader class of conjugated molecules, and analyses the drivers behind this evolutionary process. Various representative applications of MICOEs, accompanied by insights into their molecular design principles, will be reviewed separately. Perspectives on the current challenges and opportunities in research on MICOEs will be discussed at the end of the review to highlight their potential as unconventional and value-added materials for biological systems.

Cyano-substituted stilbene (CSS)-based conjugated polymers: Photophysical properties exploration and applications in photodynamic therapy

Conjugated polymers (CPs) have attracted great attention due to their excellent optical properties (such as large absorption cross section, signal amplification, high photostability etc.). As representative electron acceptors and organic small molecules which are easy to be synthesized and modified, cyano-substituted stilbene (CSS) derivatives are widely used to construct photoelectrical materials. Despite donor-acceptor (D-A) conjugated polymers based on CSS have been applied in sensing and super-resolution imaging, systematic studies about the effects of different CSS structures on the photophysical properties of CPs have rarely been reported. Therefore, we have synthesized a series of D-A conjugated polymer nanoparticles (CP NPs) based on different CSS units, and found that the photophysical properties of CP NPs including the bandgap and ΔE_S-T were closely associated with the structure of CSS derivatives. Moreover, the introduction of tetraphenylethylene (TPE) can relieve the aggregation-caused quenching (ACQ) effects of CSS conjugated polymers to varying degrees. The theoretical calculation further corroborated that by regulating the number and distribution of cyanide groups in the repeating units, the stronger D-A strength resulted in a redshift in the emission spectrum and the more efficient capacity of total ROS (¹O₂, O₂^•- and •OH) generation. We then selected CP6-TAT NPs, with the near infrared (NIR) emission and best Ф_PS, to characterize its performance in photodynamic therapy (PDT). It was revealed that CP6-TAT NPs can be regarded as an ideal candidate for PDT. The results provided a new reference for regulating the structure-effect relationship of CPs and a comprehensive method for constructing photosensitizers based on CPs.

New insight into the application of fluorescence platforms in tumor diagnosis: From chemical basis to clinical application

Early and rapid diagnosis of tumors is essential for clinical treatment or management. In contrast to conventional means, bioimaging has the potential to accurately locate and diagnose tumors at an early stage. Fluorescent probe has been developed as an ideal tool to visualize tumor sites and to detect biological molecules which provides a requirement for noninvasive, real-time, precise, and specific visualization of structures and complex biochemical processes in vivo. Rencently, the development of synthetic organic chemistry and new materials have facilitated the development of near-infrared small molecular sensing platforms and nanoimaging platforms. This provides a competitive tool for various fields of bioimaging such as biological structure and function imaging, disease diagnosis, in situ at the in vivo level, and real-time dynamic imaging. This review systematically focused on the recent progress of small molecular near-infrared fluorescent probes and nano-fluorescent probes as new biomedical imaging tools in the past 3-5 years, and it covers the application of tumor biomarker sensing, tumor microenvironment imaging, and tumor vascular imaging, intraoperative guidance and as an integrated platform for diagnosis, aiming to provide guidance for researchers to design and develop future biomedical diagnostic tools.

Recent Advances in Light-Controlled Activation of Pt(IV) Prodrugs

Pt(IV) prodrugs remain one of the most promising alternatives to conventional Pt(II) therapy due to their versatility in axial ligand choice and delayed mode of action. Selective activation from an external source is especially attractive due to the opportunity to control the activity of an antitumor drug in space and time and avoid damage to normal tissues. In this review, we discuss recent advances in photoabsorber-mediated photocontrollable activation of Pt(IV) prodrugs. Two main approaches developed are the focus of the review. The first one is the photocatalytic strategy based on the flavin derivatives that are not covalently bound to the Pt(IV) substrate. The second one is the conjugation of photoactive molecules with the Pt(II) drug via axial position, yielding dual-action Pt(IV) molecules capable of the controllable release of Pt(II) cytotoxic agents. Thus, Pt(IV) prodrugs with a light-controlled mode of activation are non-toxic in the absence of light, but show high antiproliferative activity when irradiated. The susceptibility of Pt(IV) prodrugs to photoreduction, photoactivation mechanisms, and biological activity is considered in this review.

Ionic Push–Pull Polythiophenes: A Further Step towards Eco-Friendly BHJ Organic Solar Cells

Four new conjugated polymers alternating benzothiadiazole units and thiophene moieties functionalized with ionic phosphonium or sulfonic acid salts in the side chains were synthesized by a postfunctionalization approach of polymeric precursors. The introduction of ionic groups makes the conjugated polymers soluble in water and/or polar solvents, allowing for the fabrication of bulk heterojunction (BHJ) solar cells using environmentally friendly conditions. All polymers were fully characterized by spectroscopic, thermal, electrochemical, X-ray diffraction, scanning electron, and atomic force techniques. BHJ solar cells were obtained from halogen-free solvents (i.e., ethanol and/or anisole) by blending the synthesized ionic push–pull polymers with a serinol-fullerene derivative or an ionic homopolymer acting as electron-acceptor (EA) or electron-donor (ED) counterparts, respectively. The device with the highest optical density and the smoothest surface of the active layer was the best-performing, showing a 4.76% photoconversion efficiency.

Photodynamic Antimicrobial Therapy Based on Conjugated Polymers

Pathogenic microorganisms have been a serious threat to human life and have become a public health problem of global concern. However, in the actual treatment there is a lack of efficient antimicrobial strategies which do not easily develop drug resistance; this can lead to inaccurate drug treatment that worsens the infection and even threatens life. With the emergence of a variety of drug-resistant bacteria and fungi, photodynamic therapy has gradually become one of the most promising treatment methods for drug-resistant bacteria infection; this is because it is controllable, non-invasive, and not prone to cause the development of drug resistance. Organic conjugated polymers that possess high fluorescence intensity, a large molar extinction coefficient, excellent light stability, an adjustable energy band, easy modification, good biocompatibility, and the ability to photosensitize oxygen to produce reactive oxygen species have been widely used in the fields of solar cells, highly sensitive detection systems, biological imaging, and anti-cancer and anti-microbial treatment. Photodynamic therapy is non-invasive and has high temporal and spatial resolution and is a highly effective antimicrobial treatment that does not easily induce drug resistance; it has also stimulated the scientific research enthusiasm of researchers and has become a research hotspot in the antimicrobial field. In this review, the photodynamic antibacterial applications of conjugated polymers with different structure types are summarized, and their development directions are considered.

Bright Near-Infrared π-Conjugated Oligomer Nanoparticles for Deep-Brain Three-Photon Microscopy Excited at the 1700 nm Window in Vivo

The development of three-photon fluorophores with 1700 nm excitation is pressingly desirable for in vivo imaging of tissue resided deep inside the brain. Herein, we report a designed and synthesized fluorescent molecule (OFET) for in vivo mouse brain imaging with three-photon microscopy at a record imaging depth. The OFET molecule has a relatively high fluorescence brightness and has a near-infrared (NIR) maximum emission at 820 nm after integrating as water-dispersible nanoparticles (OEFT NPs). Under 1720 nm excitation, OFET NPs show a large three-photon action cross-section of 1.06 × 10^-82 cm⁶ s²/photon², which is more than twice that of the commonly used sulforhodamine 101 (SR101) dye. Benefiting from the high tissue penetration depths for both the long excitation in the second NIR window of 1720 nm and the emission wavelength in the first NIR window of 820 nm, a high brightness, and a large action cross-section of three-photon, OFET NPs have good deep-brain imaging performance. Brain vasculatures of a mouse located at a depth of 1696 μm can be clearly resolved in vivo. With no observable cytotoxicity even in a high concentration, the present OFET NPs suggest that fluorescent π-conjugated oligomers are of great potential in high-resolution 3PM imaging of in vivo deep-tissue.

Luminescence-enhanced conjugated polymer dots through thermal treatment for cell imaging

Conjugated polymer dots (Pdots) are often used as excellent fluorescent probes in the biomedical field. In the process of preparing Pdots, the rapid change of the solvent polarity will result in a messy and defective stacking of the polymer chains in the particle, and these stacking defects of the polymer chains may weaken its luminescence properties. Here, we try to optimize the stacking of the conjugated polymer chains by the thermal annealing treatment. After the low temperature thermal treatment, the fluorescence intensity of Pdots can be enhanced by about 11%-29%, and Pdots maintain their original stability and biosafety. We used transmission electron microscopy (TEM) and single particle fluorescence imaging to reveal the possible mechanism of the chain stacking optimization process, that is, the thermal annealing process of Pdots is the competition between internal chain rearrangement in the particle and particle aggregation. The luminescence-enhanced Pdots exhibit good cellular imaging performance. These results prove that it is feasible to extend the thermal annealing treatment from planar polymer devices to polymer nanoparticles. It provides the possibility to realize stable and complex biological imaging applications using Pdots with a simple molecular structure, and a mature improvement scheme for the mass preparation of Pdots.

Aggregation and Binding-Directed FRET Modulation of Conjugated Polymer Materials for Selective and Point-of-Care Monitoring of Serum Albumins

Nonspecific interactions of conjugated polymers (CPs) with various proteins prove to be a major impediment for researchers when designing a suitable CP-based probe for the amplified and selective recognition of particular proteins in complex body fluids. Herein, a new strategy is presented for the precise and specific monitoring of clinically important serum albumin (SA) proteins at the nanomolar level using fluorescence resonance energy transfer (FRET)-modulated CP-surfactant ensembles as superior sensing materials. In brief, the newly designed color-tunable CP PF-DBT-Im undergoes intense aggregation with the surfactant sodium dodecyl sulfate (SDS), enabling drastic change in the emission color from violet to deep red due to intermolecular FRET. The emission of PF-DBT-Im/SDS ensembles then changed from deep red to magenta specifically on addition of SAs owing to the exclusive reverse FRET facilitated by synergistic effects of electrostatic interactions, hydrophobic forces, and the comparatively high intrinsic quantum yield of SAs. Interestingly, PF-DBT-Im itself could not differentiate SAs from other proteins, demonstrating the superiority of the PF-DBT-Im/SDS self-assembly over PF-DBT-Im. Finally, an affordable smartphone-integrated point-of-care (PoC) device is also fabricated as a proof-of-concept for the on-site and rapid monitoring of SAs, validating the potential of the system in long-term clinical applications.

Boosting Near-Infrared Photothermal Conversion by Intermolecular Interactions in Isomeric Cocrystals

Organic cocrystal exhibits excellent photothermal conversion (PTC), but how the intermolecular interactions of cocrystals regulate the PTC is obscure. Here, two isomeric donor molecules (phenanthrene and anthracene) and two electron-withdrawing molecules (7,7,8,8,8-tetracyanodimethylquinone and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinone dimethane) are self-assembled into the four cocrystals (PTQ, PFQ, ATQ, and AFQ). By changing the molecular configuration of the donor and the electron-withdrawing ability of the acceptor, the intrinsic influencing factors of the intermolecular interaction on the PTC were explored. Under near-infrared laser (808 nm) irradiation, the PTC efficiencies of PTQ, PFQ, AFQ, and ATQ are 35.85, 44.74, 57.00, and 60.53%, respectively. Based on the single-crystal X-ray diffraction, ultrafast time-resolved transient absorption, and excited-state theoretical calculations, we found that the π-π stacking in ATQ and AFQ is conducive to promoting the near-infrared light-harvesting ability and the p-π interaction of cocrystals can regulate the nonradiative rotation of -C(C≡N)₂ groups, resulting in a tunable near-infrared PTC via the isomeric cocrystals. Accordingly, the evaporation rate of the porous polyurethane-AFQ foam can reach 1.33 kg·m^-2·h^-1 in the simulated solar-driven water evaporation system. This work provides a strategy to boost the PTC by the intermolecular interactions of cocrystal materials.

A simple, universal and multifunctional template agent for personalized treatment of bone tumors

Bone tumors occur in bone or its accessory tissues. Benign bone tumors are easy to cure and have good prognosis, while malignant bone tumors develop rapidly and have poor and high mortality. So far, there is no satisfactory treatment method. Here, we designed a universal template vector for bone tumor therapy that simultaneously meets the needs of bone targeting, tumor killing, osteoclast suppression, and tumor imaging. The template is composed of a polydopamine (PDA) core and a multifunctional surface. PDA has excellent biosafety and photothermal performance. In this study, alendronate sodium (ALN) is grafted to enable its general bone targeting function. PDA core can carry a variety of chemotherapy drugs, and the rich ALN group can carry a variety of metal ions with an imaging function. Therefore, more personalized treatment plans can be designed for different bone tumor patients. In addition, the PDA core enables photothermal therapy and enhanced chemotherapy. Through template drug Doxorubicin (DOX) and template imaging ion Fe (Ⅱ), we systematically verified the therapeutic effect, imaging effect, and inhibition of bone dissolution of the agent on Osteosarcoma (OS), a primary malignant bone tumor, in vivo. In conclusion, our work provides a more general template carrier for the clinical treatment of bone tumors, through which personalized treatment of bone tumors can be achieved.

•

The PDA-ALN-DOX presented high bone targeting property, photothermal conversion efficiency, drug loading capacity, and multimodal imaging modalities.

•

CPT is a more efficient and convenient therapy for bone tumors.

Functionalization of Water-Soluble Conjugated Polymers for Bioapplications

Water-soluble conjugated polymers (WS-CPs) have found widespread use in bioapplications ranging from in vitro optical sensing to in vivo phototherapy. Modification of WS-CPs with specific molecular functional units is necessary to enable them to interact with biological targets. These targets include proteins, nucleic acids, antibodies, cells, and intracellular components. WS-CPs have been modified with covalently linked sugars, peptides, nucleic acids, biotin, proteins, and other biorecognition elements. The objective of this article is to comprehensively review the various synthetic chemistries that have been used to covalently link biofunctional groups onto WS-CP platforms. These chemistries include amidation, nucleophilic substitution, Click reactions, and conjugate addition. Different types of WS-CP backbones have been used as platforms including poly(fluorene), poly(phenylene ethynylene), polythiophene, poly(phenylenevinylene), and others. Example applications of biofunctionalized WS-CPs are also reviewed. These include examples of protein sensing, flow cytometry labeling, and cancer therapy. The major challenges and future development of functionalized conjugated polymers are also discussed.

Construction of Enzyme-Responsive Micelles Based on Theranostic Zwitterionic Conjugated Bottlebrush Copolymers with Brush-on-Brush Architecture for Cell Imaging and Anticancer Drug Delivery

Bottlebrush copolymers with different chemical structures and compositions as well as diverse architectures represent an important kind of material for various applications, such as biomedical devices. To our knowledge, zwitterionic conjugated bottlebrush copolymers integrating fluorescence imaging and tumor microenvironment-specific responsiveness for efficient intracellular drug release have been rarely reported, likely because of the lack of an efficient synthetic approach. For this purpose, in this study, we reported the successful preparation of well-defined theranostic zwitterionic bottlebrush copolymers with unique brush-on-brush architecture. Specifically, the bottlebrush copolymers were composed of a fluorescent backbone of polyfluorene derivate (PFONPN) possessing the fluorescence resonance energy transfer with doxorubicin (DOX), primary brushes of poly(2-hydroxyethyl methacrylate) (PHEMA), and secondary graft brushes of an enzyme-degradable polytyrosine (PTyr) block as well as a zwitterionic poly(oligo (ethylene glycol) monomethyl ether methacrylate-co-sulfobetaine methacrylate) (P(OEGMA-co-SBMA)) chain with super hydrophilicity and highly antifouling ability via elegant integration of Suzuki coupling, NCA ROP and ATRP techniques. Notably, the resulting bottlebrush copolymer, PFONPN9-g-(PHEMA15-g-(PTyr16-b-P(OEGMA6-co-SBMA6)2)) (P2) with a lower MW ratio of the hydrophobic side chains of PTyr and hydrophilic side chains of P(OEGMA-co-SBMA) could self-assemble into stabilized unimolecular micelles in an aqueous phase. The resulting unimolecular micelles showed a fluorescence quantum yield of 3.9% that is mainly affected by the pendant phenol groups of PTyr side chains and a drug-loading content (DLC) of approximately 15.4% and entrapment efficiency (EE) of 90.6% for DOX, higher than the other micelle analogs, because of the efficient supramolecular interactions of π–π stacking between the PTyr blocks and drug molecules, as well as the moderate hydrophilic chain length. The fluorescence of the PFONPN backbone enables fluorescence resonance energy transfer (FRET) with DOX and visualization of intracellular trafficking of the theranostic micelles. Most importantly, the drug-loaded micelles showed accelerated drug release in the presence of proteinase K because of the enzyme-triggered degradation of PTyr blocks and subsequent deshielding of P(OEGMA-co-SBMA) corona for micelle destruction. Taken together, we developed an efficient approach for the synthesis of enzyme-responsive theranostic zwitterionic conjugated bottlebrush copolymers with a brush-on-brush architecture, and the resulting theranostic micelles with high DLC and tumor microenvironment-specific responsiveness represent a novel nanoplatform for simultaneous cell image and drug delivery.

Molecular Programming of NIR-IIb-Emissive Semiconducting Small Molecules for In Vivo High-Contrast Bioimaging Beyond 1500 nm

Materials with long-wavelength second near-infrared (NIR-II) emission are highly desired for in vivo dynamic visualizating of microstructures in deep tissues. Herein, by employing an atom-programming strategy, a series of highly fluorescent semiconducting oligomers (SOMs) with tunable NIR-IIb emissions are developed for bioimaging applications. After self-assembly into nanoparticles (NPs), they show good brightness, high photostability, and satisfactory biocompatibility. The SOM NPs are applied as probes for high-resolution imaging of whole-body and hind-limb blood vessels, biliary tract, and bladder with their emissions over 1500 nm. This work demonstrates an atom-programming strategy for constructing semiconducting small molecules with enhanced NIR-II fluorescence for deep-tissue imaging, affording new insight for advancing molecular design of NIR-II fluorophores.

One- and Two-Photon Activated Release of Oxaliplatin from a Pt(IV)-Functionalized Poly(phenylene ethynylene)

We report a water-soluble poly(phenylene ethynylene) (PPE-Pt(IV)) that is functionalized with oxidized oxaliplatin Pt(IV) units and its use for photoactivated chemotherapy. The photoactivation strategy is based on photoinduced electron transfer from the PPE backbone to oxaliplatin Pt(IV) as an electron acceptor; this process triggers the release of oxaliplatin, which is a clinically used anticancer drug. Mechanistic studies carried out using steady-state and time-resolved fluorescence spectroscopy coupled with picosecond-nanosecond transient absorption support the hypothesis that electron transfer triggers the drug release. Photoactivation is effective, producing oxaliplatin with a good chemical yield in less than 1 h of photolysis (400 nm, 5 mW cm-2). Photorelease of oxaliplatin from PPE-Pt(IV) can also be effected with two-photon excitation by using 100 fs pulsed light at 725 nm. Cytotoxicity studies using SK-OV-3 human ovarian cancer cells demonstrate that without photoactivation PPE-Pt(IV) is not cytotoxic at concentrations up to 10 μM in polymer repeating unit (PRU) concentration. However, following a short period of 460 nm irradiation, oxaliplatin is released from PPE-Pt(IV), resulting in cytotoxicity at concentrations as low as 2.5 μM PRU.

Bioactive Composite Nanoparticles for Effective Microenvironment Regulation, Neuroprotection, and Cell Differentiation

Brain injuries typically result in neural tissue damage and trigger a permanent neurologic deficit. Current methods exhibit limited effects due to the harsh microenvironment of injury regions rich in reactive oxygen species (ROS). Herein, a microenvironment regulation combined with cellular differentiation strategy is designed for repairing injured nerves. We prepare PMNT/F@D-NP nanoparticles comprising a bioactive polythiophene derivative (PMNT) and fullerenol as a multifunctional theranostic nanoplatform. PMNT/F@D-NPs can significantly reduce the accumulation of ROS in the simulated ischemic brain injury trial and inhibit cell apoptosis due to the effective free radical scavenging ability of fullerenol. Interestingly, the bioactive PMNT/F@D-NPs can promote the proliferation and differentiation of neurons, confirmed by immunofluorescence and western blotting studies. This newly developed strategy exhibits a combinatorial therapeutic effect by promoting nerve cell survival and differentiation while improving the microenvironment in the damaged area, which paves the way for the rational design of multifunctional agents for brain injury therapy.