CsPbBr3 and CsPbBr3/SiO2 Nanocrystals as a Fluorescence Sensing Platform for High-Throughput Identification of Multiple Thiophene Sulfides

Label-free fluorescent sensor for sensitive detection of ctDNA based on water stabilized CsPbBr3 nanosheet

The detection of circulating tumor DNA (ctDNA), as a practical liquid biopsy technique, was of great significance for the study of cancer diagnosis and prognosis. However, reported methods for detection ctDNA still have some limitations, such as tedious process and high cost. In this study, CsPbBr3 nanosheet (CsPbBr3 NS) with high water stability was prepared by etching, and its fluorescence intensity could be stably stored for 1 year. The Ti3C2Tx possessed high quenching efficiency for CsPbBr3 NS and the HOMO-LUMO orbital study revealed that the PET mechanism was responsible for fluorescence quenching. And the Ti3C2Tx showed stronger affinity towards single-stranded DNA (ssDNA), as compared with double-stranded DNA (dsDNA). The probe ssDNA could be adsorbed on the surface of Ti3C2Tx through π-π stacking. After the targets were recognized by probe ssDNA to form dsDNA, its affinity with Ti3C2Tx decreased and the active site of Ti3C2Tx recovered, causing a high quenching efficiency on CsPbBr3 NS. Based on this, a label-free fluorescent biosensor was designed for the sensitive detection of ctDNA (EGFR 19 Dels for non-small cell lung cancer, NSCLC). Under the optimal experimental conditions, this biosensor exhibited a detection limit of 180 fM and a linear range of 50 pM-350 pM with amplification of magnetic beads through strand displacement reaction. In addition, this sensor was applied to the detection of ctDNA in serum samples and cells lysates. This method for ctDNA detection was expected to have great potential for biomarker detection in the field of liquid biopsy.

Construction and Application of Nanozyme Sensor Arrays

Compared with traditional "lock-key mode" biosensors, a sensor array consists of a series of sensing elements based on intermolecular interactions (typically hydrogen bonds, van der Waals forces, and electrostatic interactions). At the same time, sensor arrays also have the advantages of fast response, high sensitivity, low energy consumption, low cost, rich output signals, and imageability, which have attracted widespread attention from researchers. Nanozymes are nanomaterials which own enzyme-like properties. Because of the adjustable activity, high stability, and cost effectiveness of nanozymes, they are potential candidates for construction of sensor arrays to output different signals from analytes through the chemoresponse of colorants, which solves the shortcomings of traditional sensors that they cannot support multiple detection and lack universality. Recently, a sensor array based on nanozymes as nonspecific recognition receptors has attracted much more attention from researchers and has been applied to precise recognition of proteins, bacteria, and heavy metals. In this perspective, attention is given to nanozymes and the regulation of their enzyme-like activity. Particularly, the building principles and methods for sensor arrays based on nanozymes are analyzed, and the applications are summarized. Finally, the approaches to overcome the challenges and perspectives are also presented and analyzed for facilitating further research and development of nanozyme sensor arrays. This perspective should be helpful for gaining insight into research ideas within the field of nanozyme sensor arrays.

Multiple-Emitting Luminescent Metal-Organic Framework as an Array-on-a-MOF for Rapid Screening and Discrimination of Nitroaromatics

Fluorescence array technologies have attracted great interest in the sensing field because of their high sensitivity, low cost, and capability of multitarget detection. However, traditional array sensing relies on multiple independent sensors and thus often requires time-consuming and laborious measurement processes. Herein, we introduce a novel fluorescence array strategy of the array-on-a-metal-organic framework (MOF), which integrates multiple array elements into a single MOF matrix to achieve facile sensing and discrimination of multiple target analytes. As a proof-of-concept system, we constructed a luminescent MOF containing three different emitting channels, including a lanthanide ion (europium/Eu3+, red emission), a fluorescent dye (7-hydroxycoumarin-4-acetic acid/HCAA, blue emission), and the MOF itself (UiO-66-type MOF, blue-violet emission). Five structurally similar nitroaromatic compounds (NACs) were chosen as the targets. All three channels of the array-on-a-MOF displayed rapid and stable fluorescence quenching responses to NACs (response equilibrium achieved within 30 s). Different responses were generated for each channel against each NAC due to the various quenching mechanisms, including photoinduced electron transfer, energy competition, and the inner filter effect. Using linear discriminant analysis, the array-on-a-MOF successfully distinguished the five NACs and their mixtures at varying concentrations and demonstrated good sensitivity to quantify individual NACs (detect limit below the advisory concentration in drinking water). Moreover, the array also showed feasibility in the sensing and discrimination of multiple NACs in real water samples. The proposed "array-on-a-MOF" strategy simplifies multitarget discrimination procedures and holds great promise for various sensing applications.

Sensing Utilities of Cesium Lead Halide Perovskites and Composites: A Comprehensive Review

Recently, the utilization of metal halide perovskites in sensing and their application in environmental studies have reached a new height. Among the different metal halide perovskites, cesium lead halide perovskites (CsPbX3; X = Cl, Br, and I) and composites have attracted great interest in sensing applications owing to their exceptional optoelectronic properties. Most CsPbX3 nanostructures and composites possess great structural stability, luminescence, and electrical properties for developing distinct optical and photonic devices. When exposed to light, heat, and water, CsPbX3 and composites can display stable sensing utilities. Many CsPbX3 and composites have been reported as probes in the detection of diverse analytes, such as metal ions, anions, important chemical species, humidity, temperature, radiation photodetection, and so forth. So far, the sensing studies of metal halide perovskites covering all metallic and organic-inorganic perovskites have already been reviewed in many studies. Nevertheless, a detailed review of the sensing utilities of CsPbX3 and composites could be helpful for researchers who are looking for innovative designs using these nanomaterials. Herein, we deliver a thorough review of the sensing utilities of CsPbX3 and composites, in the quantitation of metal ions, anions, chemicals, explosives, bioanalytes, pesticides, fungicides, cellular imaging, volatile organic compounds (VOCs), toxic gases, humidity, temperature, radiation, and photodetection. Furthermore, this review also covers the synthetic pathways, design requirements, advantages, limitations, and future directions for this material.

Water-stable perovskite-silica nanocomposites for encoded microbeads construction and multiplexed detection

All-inorganic lead halide perovskite nanocrystals exhibiting bright luminescence have great potential as fluorescence elements for optical encoding. However, their limited stability in water hinders the application in biosensing. In this study, novel optical encoded microbeads based on CsPbX3 (X = Cl, Br) nanocrystals are developed and applied in bead-based suspension arrays for the first time. Through the in-situ crystallization of CsPbX3 nanocrystals within mesoporous silica nano-templates (MSNs), accompanied by mesopores collapse after sintering, CsPbX3@MSNs (X3M) nanocomposites with uniform morphology and stable fluorescence intensity in aqueous solutions for up to 50 days are obtained. By assembling X3M with microspheres to form a host-guest structure, an optical encoding microbead (MX3M) library is established by varying the X3M ratio, halide composition, and the size of host microspheres, which can be easily decoded under multi-channel flow cytometer. As a result, MX3M exhibits outstanding capacity for specific target capture and negligible nonspecific absorption performance in the multiplex nucleic acid detection of respiratory viruses, with a low limit of detection (10 copies/rxn). This result highlights the tremendous potential of MX3M encoded microbeads constructed based on CsPbX3 nanocrystals for multiplexed bioassays.

Biocompatible Silica-Coated Europium-Doped CsPbBr3 Nanoparticles with Luminescence in Water for Zebrafish Bioimaging

Cesium lead halide (CsPbX3 , X = Br, Cl, and I) nanocrystals (NCs) are widely concerned and applied in many fields due to the excellent photoelectric performance. However, the toxicity of Pb and the loss of luminescence in water limit its application in vivo. A stable perovskite nanomaterial with good bioimaging properties is developed by incorporating europium (Eu) in CsPbX3 NCs followed with the surface coating of silica (SiO2 ) shell (CsPbX3 :Eu@SiO2 ). Through the surface coating of SiO2 , the luminescence stability of CsPbBr3 in water is improved and the leakage of Pb2+ is significantly reduced. In particular, Eu doping inhibits the photoluminescence quantum yield reduction of CsPbBr3 caused by SiO2 coating, and further reduces the release of Pb2+ . CsPbBr3 :Eu@SiO2 nanoparticles (NPs) show efficient luminescence in water and good biocompatibility to achieve cell imaging. More importantly, CsPb(ClBr)3 :Eu@SiO2 NPs are obtained by adjusting the halogen components, and green light and blue light are realized in zebrafish imaging, showing good imaging effect and biosafety. The work provides a strategy for advanced perovskite nanomaterials toward biological practical application.

Pattern Recognition and Visual Detection of Aldehydes Using a Single ESIPT Dye

The accurate discrimination and quantification of aldehydes is a worthy objective made challenging by their similar chemical reactivities. Considering the nucleophilic reaction mechanism between an aldehyde and a primary amine, it is reasonable to vary the reaction pH to manipulate the reactivity of aldehydes and the stability of the resulting Schiff base for analytical purposes. We have designed and synthesized three benzothiazole-based fluorescent molecules (BS1-BS3) containing an amino group substituted at the ortho-, meta-, and para-positions for aldehyde sensing. It was determined that only BS1 having an amino group at the ortho-position exhibits a significant fluorescence response in the presence of formaldehyde at a particular pH, whereas BS2 and BS3 gave negligible responses, indicating that the ESIPT process in BS1 should be responsible for the changes in its fluorescence. Accordingly, a pH-mediated sensor array BS1SA was constructed by dissolving BS1 in aqueous solvents with different pH values. BS1SA was found to be reliable for the discrimination of seven different aldehydes and identification of unknown aldehyde samples. Moreover, BS1 was successfully applied to prepare a fluorescent test paper for the visual detection of formaldehyde vapor.

CsPbBr3 perovskites: A dual fluorescence sensor to distinguish ethanol from methanol

In recent years, lead halide perovskites have emerged as a promising material with defect tolerance, thermally stable, and optoelectronic properties. However, the instability is the major factor which hinder their potential applications in various fields. This work demonstrates the chemical stability of Cesium Lead Bromide (CsPbBr₃) under different passivation condition with an objective to develop alcohol sensor. Cetyltrimethyl ammonium bromide (CTAB) passivated CsPbBr₃ demonstrated as a turn off fluorescent probe for alcohols and more significantly turn on fluorescent probe for ethanol. Herein, it is shown that CTAB passivated CsPbBr₃ can effectively discriminate ethanol from methanol owing to its different mode of interaction with ethanol and methanol. The outstanding optical properties of halide perovskites with an ultra-low detection limit of 7.3 ppb was obtained for ethanol detection. The sensing performance of the material is also validated with petrol and cough syrup samples showing excellent performance for future implementation with practical applications.

Glucose and pH responsive fluorescence detection system based on simple synthesis of silicon-coated perovskite quantum dots

Perovskite quantum dots (PQDs) are extremely unstable in ambient air due to their inherent structural instability, which limits the wide application of PQDs. In this work, silicon-coated CsPbBr₃ PQDs (CsPbBr₃@SiO₂) was synthesized via a simple method. The SiO₂ coating effectively isolated PQDs from water and oxygen in the environment, which were the main elements that destroyed the structure stability of PQDs. The synthesized CsPbBr₃@SiO₂ can be stored in water for more than 2 months and posessed wonderful dispersibility in aqueous solution. The fluorescence intensity remained unchanged within 7 days and only decreased by 11.9 % within 2 months. We found that CsPbBr₃@SiO₂ was extremely sensitive to environmental pH, and the fluorescence intensity decreased with the reduction of pH. In addition, an excellent linear relationship with pH value in the range of 1.0 ∼ 5.0 was achieved. As we all known that glucose can be catalyzed by glucose oxidase to produce gluconic acid and hydrogen peroxide, in which a good deal of protons were produced and the pH was gradually lowered. Since CsPbBr₃@SiO₂ was stable to water and oxygen, and sensitive to ambient pH, we applied CsPbBr₃@SiO₂ to the detection of glucose. CsPbBr₃@SiO₂ showed fantastic selectivity and sensitivity to glucose, and the detection limit can even reach 18.5 μM. Furthermore, CsPbBr₃@SiO₂ was successfully applied to the detection of glucose in the human serum with satisfactory performance.