One-Step Preparation of Chitin Nanofiber Dispersion in Full pH Surroundings Using Recyclable Solid Oxalic Acid and Evaluation of Redispersed Performance

A nanochitin-drived natural biological adhesive with high cohesive for wound healing

The weak cohesive strength of tissue adhesives hinders their practical applications. To overcome this challenge, we develop a green bio-adhesive that balances both cohesion and adhesion, drawing inspiration from the natural adhesion mechanisms of mussels. This bio-adhesive, referred to as OTS, was ingeniously crafted through the co-assembly of multi-surface-charged chitin nanofibers (OAChN) and tannic acid (TA), integrated with silk fibroin (SF), resulting in a material with enhanced cohesive strength and robust adhesive properties. The adhesive achieved significant cohesion through hydrogen-bonded crosslinking among OAChN, SF, and TA, boasting a tensile strength of 24.53 KPa and allowing for 150 % elastic deformation. OTS adheres effectively to diverse complex surfaces, with adhesive strengths of 14.55 MPa underwater and 8.83 MPa in air, demonstrating excellent versatility. The biocompatibility and degradability of OTS were confirmed by a wound healing model in SD rats, showing no nanotoxicity and effectively promoting wound healing, rapid hemostasis, and sealing. This green adhesive strategy offers a novel approach to augmenting the cohesive strength of tissue adhesives suitable for complex conditions and has potential medical applications ranging from rapid hemostasis to wound healing enhancement.

Preparation of zwitterionically charged chitin nanofibers through one step chemical modification and their application for antireflective coatings

Chitin nanofibers are widely used in many fields because of their biocompatibility, renewability and excellent mechanical properties. Herein, zwitterionically charged chitin nanofibers (ZC-ChNFs) were prepared from chitin via one step chemical modification (oxalic acid pretreatment) and subsequent ultrasound treatment. Effects of pretreatment time on size of the ZC-ChNFs and pH of ZC-ChNF suspensions on the thickness, porosity, refractive index and antireflective capacity of ZC-ChNF coatings were investigated. It was found that, by adjusting pH of the ZC-ChNF suspension, porosity and refractive index of the ZC-ChNF coatings could be controlled. The ZC-ChNF coatings fabricated with smaller ZC-ChNFs had higher antireflective performance and the transmittance gain of a glass with a ZC-ChNF coating was about 3.5 % at a wavelength of 550 nm compared to the bare glass. The results of this work provide a promising pathway to fabricate antireflective coating with ZC-ChNFs just by controlling the pH of ZC-ChNF suspensions.

Mussel-inspired chitin nanofiber adherable hydrogel sensor with interpenetrating network and great fatigue resistance for motion and acoustics monitoring

A method for grafting dopamine onto TEMPO-oxidized chitin nanofibers (TOChN) was developed, achieving a surface grafting rate of 54 % through the EDC/NHS reaction. This process resulted in the formation of dopamine-grafted TOChN (TOChN-DA). Subsequently, an adherent, highly sensitive, fatigue-resistant conductive PAM/TOChN-PDA/Fe3+ (PTPF) hydrogel was successfully synthesized based on the composition of polyacrylamide (PAM) and TOChN-DA, which exhibited good cell compatibility, a tensile strength of 89.42 kPa, and a high adhesion strength of 62.56 kPa with 1.2 wt% TOChN-DA. Notably, the PTPF hydrogel showed stable adherence to various surfaces, such as rubber, copper, and human skin. Specifically, the addition of FeCl3 contributed to a multifunctional design in the PTPF interpenetrating network (IPN) hydrogel, endowing it with conductivity, cohesion, and antioxidant properties, which facilitated sensitive motion and acoustics monitoring. Moreover, the PTPF hydrogel demonstrated exceptional fatigue resistance and sensing stability, maintaining performance at 50 % strain over 1000 cycles. These attributes render the PTPF hydrogel a promising candidate for advanced biosensors in medical and athletic applications.

Preparation of nanochitin using deep eutectic solvents

Chitin is an abundant and renewable non-wood biopolymer. Nanochitin is formed by the assembly of chitin molecules, which has the advantages of large tensile strength, high specific surface area, and biodegradability, so it has been widely used. However, the traditional methods of preparing nanochitin have many drawbacks. As the new generation of green solvents, deep eutectic solvents (DESs) have been successfully applied in the fields of chitin dissolution, extraction, and nanochitin preparation. In this review, the relevant knowledge of chitin, nanochitin, and DESs was first introduced. Then, the application status of DESs in the fields of chitin was summarized, with a focus on the preparation of nanochitin using DESs. In conclusion, this review provided a comprehensive analysis of the published literature and proposed insights and development trends in the field of preparation of nanochitin using DESs, aiming to provide guidance and assistance for future researchers.

Nanochitin for sustainable and advanced manufacturing

Presently, the rapid depletion of resources and drastic climate change highlight the importance of sustainable development. In this case, nanochitin derived from chitin, the second most abundant renewable polymer in the world, possesses numerous advantages, including toughness, easy processability and biodegradability. Furthermore, it exhibits better dispersibility in various solvents and higher reactivity than chitin owing to its increased surface area to volume ratio. Additionally, it is the only natural polysaccharide that contains nitrogen. Therefore, it is valuable to further develop this innovative technology. This review summarizes the recent developments in nanochitin and specifically identifies sustainable strategies for its preparation. Additionally, the different biomass sources that can be exploited for the extraction of nanochitin are highlighted. More importantly, the life cycle assessment of nanochitin preparation is discussed, followed by its applications in advanced manufacturing and perspectives on the valorization of chitin waste.

Facile preparation of re-dispersible/amphoteric nanochitin powder via choline chloride/propanedioic composite for stabilizing Pickering emulsions

Choline chloride (ChCl)/propanedioic acid (PA) based hydrated composites are synthesized for producing nanochitins from crab shell in this work. The yield of nanochitin remains higher than 75 %, even if the water content reaches 80 %. ChCl is found necessary for the successful nano-fibrillation of chitin. However, PA contributes more to the yield improvement of nanochitin. ChCl mediated PA hydrolysis leads to the successful grafting of carboxyl groups in nanochitins, contributing to its amphoteric dispersed nature. After salt-induced separation and freeze-drying treatment, dried nanochitin powder can be prepared and found to disperse well either in acidic or alkaline suspension, exhibiting efficient drying/redispersion performance. The well amphoteric and drying/redispersion nature both benefit the facile preparation of nanochitin-based Pickering emulsions. For Pickering emulsion prepared under different pH, creaming only appears under acidic conditions (pH 3) for which the creaming index reaches 10.56 % after 30 days of storage. No obvious de-emulsification can be observed under pH 7 and 10. The efficient amphoteric and drying/redispersion nature together with the simplified preparation process of nanochitins are believed to facilitate the processing and practical applications of nanochitin.

Preparation of Janus film for fog water collection via layer-by-layer assembling of nanocellulose and nanochitin on PLA

In order to explore the possibility of natural carbohydrate polymers as a biodegradable and sustainable fog water harvesting material, this work proposed an efficient substrate (hydrophobic)-transition layer (amphoteric)-coating (hydrophilic) sandwich spin-coating strategy to form all biomass-based Janus film. The oxalic acid hydrolyzed nanochitin (OAChN) was applied as a transition layer that enabled successful spin-coating of the hydrophilic nanocellulose (TEMPO-oxidized cellulose nanofiber, TOCN) and nanochitin (partially deacetylated chitin nanofibers, DEChN) on the hydrophobic polylactic acid (PLA) film substrate. In which a layer-by-layer (LBL) assembling of TOCN (carboxyl-rich negative surface charge) and DEChN (amino-rich positive surface charge) was designed to form a thickness and surface property controllable polysaccharide coating on PLA. The finally formed PLA-OAChN-TOCN/DEChN (LBL) film showed hydrophilic and hydrophobic heteromeric faces at the opposite sides and thus had improved fog water collection capacity of 90.85 mg·cm-2·h-1 (30 layers of TOCN/DEChN spin-coated on PLA), which was 276 % higher than the pure PLA film. The transition layer engaged sandwich spin-coating strategy, together with LBL assembling method proposed in this study provided a feasible fabrication of all biomass-based fog water collectors (FWC) that could contribute to alleviating water shortage.

High-tensile chitin films regenerated from cryogenic aqueous phosphoric acid

The abuse of non-renewable fossil resources and the resulting plastic pollution have posed a great burden on the environment. Fortunately, renewable bio-macromolecules have shown great potential to replace synthetic plastics in fields ranging from biomedical applications, and energy storage to flexible electronics. However, the potential of recalcitrant polysaccharides, such as chitin, in the above-mentioned fields have not been fully exploited because of its poor processability, which is ultimately due to the lack of suitable, economical, and environmentally friendly solvent for it. Herein, we demonstrate an efficient and stable strategy for the fabrication of high-strength chitin films from concentrated chitin solutions in cryogenic 85 wt% aqueous phosphoric acid (aq. H₃PO₄). The regeneration conditions, including the nature of the coagulation bath and its temperature are important variables affecting the reassembly of chitin molecules and hence the structure and micromorphology of the films. Uniaxial orientation of the chitin molecules by applying tension to the RCh hydrogels further endows the films with enhanced mechanical properties of up to 235 MPa and 6.7 GPa in tensile strength and Young's modulus, respectively.

Nanochitin and Nanochitosan: Chitin Nanostructure Engineering with Multiscale Properties for Biomedical and Environmental Applications

Nanochitin and nanochitosan (with random-copolymer-based multiscale architectures of glucosamine and N-acetylglucosamine units) have recently attracted immense attention for the development of green, sustainable, and advanced functional materials. Nanochitin and nanochitosan are multiscale materials from small oligomers, rod-shaped nanocrystals, longer nanofibers, to hierarchical assemblies of nanofibers. Various physical properties of chitin and chitosan depend on their molecular- and nanostructures; translational research has utilized them for a wide range of applications (biomedical, industrial, environmental, and so on). Instead of reviewing the entire extensive literature on chitin and chitosan, here, recent developments in multiscale-dependent material properties and their applications are highlighted; immune, medical, reinforcing, adhesive, green electrochemical materials, biological scaffolds, and sustainable food packaging are discussed considering the size, shape, and assembly of chitin nanostructures. In summary, new perspectives for the development of sustainable advanced functional materials based on nanochitin and nanochitosan by understanding and engineering their multiscale properties are described.

Zwitterionic chitin nanocrystals mediated composite and self-assembly with cellulose nanofibrils

Zwitterionic dispersed chitin nanocrystals and TEMPO oxidized cellulose nanofibrils can be well mixed and self-assembled to be hydrogels/membranes. Active carboxyl groups ensure the well mixing of zwitterionic chitin nanocrystals and cellulose nanofibrils under neutral and alkaline condition. Electrostatic attraction between amino groups in chitin nanocrystals and carboxyl groups in chitin nanocrystals and cellulose nanofibrils further endows self-assemble property of composite suspensions. Simple standing for 12 h at room temperature is found enough for preparing self-assembled composite hydrogels. By 1-(3-dimethy-laminopropyl)-3-ethylcarbodiimide hydrochloride/N-hydroxy succinimide (EDC/NHS) mediated chemical crosslinking, the storage modulus of composite hydrogel can achieve almost 8 times higher than self-assembled hydrogel. Well dispersed composite suspensions also can be transformed to be membranes via filtration treatment. The strain increases almost 2.3 times higher with similar tensile strength for cellulose nanofibril rich samples, and chitin nanocrystals mainly contributes to the enhancement in strain of composite membranes.

Nanochitin: Chemistry, Structure, Assembly, and Applications

Chitin, a fascinating biopolymer found in living organisms, fulfills current demands of availability, sustainability, biocompatibility, biodegradability, functionality, and renewability. A feature of chitin is its ability to structure into hierarchical assemblies, spanning the nano- and macroscales, imparting toughness and resistance (chemical, biological, among others) to multicomponent materials as well as adding adaptability, tunability, and versatility. Retaining the inherent structural characteristics of chitin and its colloidal features in dispersed media has been central to its use, considering it as a building block for the construction of emerging materials. Top-down chitin designs have been reported and differentiate from the traditional molecular-level, bottom-up synthesis and assembly for material development. Such topics are the focus of this Review, which also covers the origins and biological characteristics of chitin and their influence on the morphological and physical-chemical properties. We discuss recent achievements in the isolation, deconstruction, and fractionation of chitin nanostructures of varying axial aspects (nanofibrils and nanorods) along with methods for their modification and assembly into functional materials. We highlight the role of nanochitin in its native architecture and as a component of materials subjected to multiscale interactions, leading to highly dynamic and functional structures. We introduce the most recent advances in the applications of nanochitin-derived materials and industrialization efforts, following green manufacturing principles. Finally, we offer a critical perspective about the adoption of nanochitin in the context of advanced, sustainable materials.

A MoS2QDs/chitin nanofiber composite for improved antibacterial and food packaging

Chitin nanofiber has potential application as antibacterial nanocomposite material because of its inherent biocompatibility, biological activity, amino containing macromolecular structure and nano-size effect. Molybdenum disulfide quantum dots (MoS₂QDs) were uniformly bonded on partially deacetylated chitin nanofibers (DEChNs) by hydrothermal reactions. The antibacterial properties of MoS₂QDs/DEChN against Escherichia coli were detected under different conditions. When the antibacterial agent was fixed at 200 μg/mL, the survival rates of bacteria were 2.77% (pH = 4), 5.58% (pH = 5) and 7.83% (pH = 6), which were lower than those in the DEChN groups. Unlike DEChN, which only had excellent antibacterial activity under acidic conditions (pH < 5), the combination of DEChN and MoS₂QDs had antibacterial activity close to neutral conditions, with a bacteriostatic rate > 90%. When TEMPO-oxidized cellulose nanofibers (TOCN) were applied for the preparation of MoS₂QDs/TOCN, they did not show obvious antibacterial ability, which proved the positive role of DEChN and its amino groups. The MoS₂QDs/DEChN assembled film could be applied to preserve meat by delaying spoilage. The current study might inspire new ideas for designing food packaging based on the prepared MoS₂QDs/DEChN films.