Luminescent Difluoroboron β-Diketonate PLA-PEG Nanoparticle

Mechanofluorochromic behaviors and latent fingerprint detection of triphenylamine-based compounds with mono-/bis-BF2 fluorophores

To better understand the relationship between molecular structure of the mono-/bis-BF2-core compounds and mechanofluoroboron behaviors, two pyridine-based difluoroboron compounds with triphenylamine group (TPA-ts-BF2 and TPA-ts-2BF2) were designed and successfully synthesized, which TPA-ts-BF2 including a BF2 fluorophore and TPA-ts-2BF2 containing the bisBF2 fluorophores. Based on the photophysical properties measurements results, it was found that TPA-ts-2BF2 had more excellent intramolecular charge transfer characteristics than that of TPA-ts-BF2, and exhibited significant aggregation-induced emission activity, however, TPA-ts-BF2 displayed typical aggregation-caused quenching phenomenon. Meanwhile, the emission spectrum of the solid powders of TPA-ts-2BF2 was red-shifted 52 nm after grinding, that of TPA-ts-BF2 was red-shifted 46 nm, which was resulted from crystalline state switching to amorphous state. According to the theoretical calculations, we conjectured that TPA-ts-BF2 with uncoordinated amide linkage moiety had a tendency to forming a more twisted conformance and higher molecular polarity, which made that mechanofluorochromic behavior was worse than that of TPA-ts-2BF2. Additionally, TPA-ts-2BF2 was applied to latent fingerprint detection due to its prime aggregation-induced emission property.

Quantifying the effects of anesthesia on intracellular oxygen via low-cost portable microscopy using dual-emissive nanoparticles

Intracellular oxygenation is an important parameter for numerous biological studies. While there are a variety of methods available for acquiring in vivo measurements of oxygenation in animal models, most are dependent on indirect oxygen measurements, restraints, or anesthetization. A portable microscope system using a Raspberry Pi computer and Pi Camera was developed for attaching to murine dorsal window chambers. Dual-emissive boron nanoparticles were used as an oxygen-sensing probe while mice were imaged in awake and anesthetized states. The portable microscope system avoids altered in vivo measurements due to anesthesia or restraints while enabling increased continual acquisition durations.

Drug-delivery nanoparticles for bone-tissue and dental applications

The use of nanoparticles as biomaterials with applications in the biomedical field is growing every day. These nanomaterials can be used as contrast imaging agents, combination therapy agents, and targeted delivery systems in medicine and dentistry. Usually, nanoparticles are found as synthetic or natural organic materials, such as hydroxyapatite, polymers, and lipids. Besides that, they are could also be inorganic, for instance, metallic or metal-oxide-based particles. These inorganic nanoparticles could additionally present magnetic properties, such as superparamagnetic iron oxide nanoparticles. The use of nanoparticles as drug delivery agents has many advantages, for they help diminish toxicity effects in the body since the drug dose reduces significantly, increases drugs biocompatibility, and helps target drugs to specific organs. As targeted-delivery agents, one of the applications uses nanoparticles as drug delivery particles for bone-tissue to treat cancer, osteoporosis, bone diseases, and dental treatments such as periodontitis. Their application as drug delivery agents requires a good comprehension of the nanoparticle properties and composition, alongside their synthesis and drug attachment characteristics. Properties such as size, shape, core-shell designs, and magnetic characteristics can influence their behavior inside the human body and modify magnetic properties in the case of magnetic nanoparticles. Based on that, many different studies have modified the synthesis methods for these nanoparticles and developed composite systems for therapeutics delivery, adapting, and improving magnetic properties, shell-core designs, and particle size and nanosystems characteristics. This review presents the most recent studies that have been presented with different nanoparticle types and structures for bone and dental drug delivery.

Room temperature tunable multicolor phosphorescent polymers for humidity detection and information encryption

Amorphous polymer-based room temperature phosphorescence (RTP) materials exhibiting tunable emission colors have received tremendous attention and are extremely challenging to prepare. Herein, polyacrylamide-based RTP materials with tunable multicolor emission were prepared via copolymerizing phosphor with concentration dependent luminescence colors and acrylamide with different molar ratios. The hydrogen bonding interactions and chemically crosslinked structures in these polymers effectively restrict the mobility of phosphors and activate efficient RTP emission. The molar ratio of phosphor and acrylamide has a significant influence on the photophysical properties of these polymers, which can be used to fabricate multicolor materials. In addition, the RTP intensity decreases with increasing humidity due to the disassociation of hydrogen bonding by adsorption of water, manifesting as a humidity sensor. Benefiting from the distinguishable RTP lifetimes and the responsiveness to humidity, triple encoding for information encryption is successfully realized.

A polymer with tunable multicolor was prepared via copolymerizing a phosphor with concentration dependent luminescence and acrylamide based on chemical crosslinking and hydrogen bonding interactions for humidity detection and information encryption.

Polymer Micro and Nanoparticles Containing B(III) Compounds as Emissive Soft Materials for Cargo Encapsulation and Temperature-Dependent Applications

Polymer nanoparticles doped with fluorescent molecules are widely applied for biological assays, local temperature measurements, and other bioimaging applications, overcoming several critical drawbacks, such as dye toxicity, increased water solubility, and allowing imaging of dyes/drug delivery in water. In this work, some polymethylmethacrylate (PMMA), polyvinylpyrrolidone (PVP) and poly(styrene-butadiene-styrene) (SBS) based micro and nanoparticles with an average size of about 200 nm and encapsulating B(III) compounds have been prepared via the reprecipitation method by using tetrahydrofuran as the oil phase and water. The compounds are highly hydrophobic, but their encapsulation into a polymer matrix allows obtaining stable colloidal dispersions in water (3.39 µM) that maintain the photophysical behavior of these dyes. Although thermally activated non-radiative processes occur by increasing temperature from 25 to 80 °C, the colloidal suspension of the B(III) particles continues to emit greenish light (λ = 509 nm) at high temperatures. When samples are cooling back to room temperature, the emission is restored, being reversible. A probe of concept drug delivery study was conducted using coumarin 6 as a prototype of a hydrophobic drug.

Fluorescent labeling of biocompatible block copolymers: synthetic strategies and applications in bioimaging

Among biocompatible materials, block copolymers (BCPs) possess several advantages due to the control of their chemistry and the possibility of combining various blocks with defined properties. Consequently, BCPs drew considerable attention as biocompatible materials in the fields of drug delivery, medicine and bioimaging. Fluorescent labeling of BCPs quickly appeared to be a method of choice to image and track these materials in order to better understand the nature of their interactions with biological media. However, incorporating fluorescent markers (FM) into BCPs can appear tricky; we thus intend to help chemists in this endeavor by reviewing recent advances made in the last 10 years. With the choice of the FM being of prior importance, we first reviewed their photophysical properties and functionalities for optimal labeling and imaging. In the second part the different chemical approaches that have been used in the literature to fluorescently label BCPs have been reviewed. We also report and discuss relevant applications of fluorescent BCPs in bioimaging.

Recent advances in dioxaborine-based fluorescent materials for bioimaging applications

Fluorescent materials are continuously contributing to important advances in the field of bioimaging. Among these materials, dioxaborine-based fluorescent materials (DBFM) are arousing growing interest. Due to their rigid structures conferred by a cyclic boron complex, DBFM possess appealing photophysical properties including high extinction coefficients and quantum yields as well as emission in the near infrared, enhanced photostability and high two-photon absorption. We herein discuss the recent advances of DBFM that found use in bioimaging applications. This review covers the development of fluorescent molecular probes for biomolecules (DNA, proteins), small molecules (cysteine, H₂O₂, oxygen), ions and the environment (polarity, viscosity) as well as polymers and nanomaterials used in bioimaging. This review aims at providing a comprehensive and critical insight on DBFM by highlighting the assets of these promising materials in bioimaging but also by pointing out their limitations that would require further developments.

Difluoroboron β-diketonate polylactic acid oxygen nanosensors for intracellular neuronal imaging

Critical for metabolism, oxygen plays an essential role in maintaining the structure and function of neurons. Oxygen sensing is important in common neurological disorders such as strokes, seizures, or neonatal hypoxic-ischemic injuries, which result from an imbalance between metabolic demand and oxygen supply. Phosphorescence quenching by oxygen provides a non-invasive optical method to measure oxygen levels within cells and tissues. Difluoroboron β-diketonates are a family of luminophores with high quantum yields and tunable fluorescence and phosphorescence when embedded in certain rigid matrices such as poly (lactic acid) (PLA). Boron nanoparticles (BNPs) can be fabricated from dye-PLA materials for oxygen mapping in a variety of biological milieu. These dual-emissive nanoparticles have oxygen-insensitive fluorescence, oxygen-sensitive phosphorescence, and rigid matrix all in one, enabling real-time ratiometric oxygen sensing at micron-level spatial and millisecond-level temporal resolution. In this study, BNPs are applied in mouse brain slices to investigate oxygen distributions and neuronal activity. The optical properties and physical stability of BNPs in a biologically relevant buffer were stable. Primary neuronal cultures were labeled by BNPs and the mitochondria membrane probe MitoTracker Red FM. BNPs were taken up by neuronal cell bodies, at dendrites, and at synapses, and the localization of BNPs was consistent with that of MitoTracker Red FM. The brain slices were stained with the BNPs, and the BNPs did not significantly affect the electrophysiological properties of neurons. Oxygen maps were generated in living brain slices where oxygen is found to be mostly consumed by mitochondria near synapses. Finally, the BNPs exhibited excellent response when the conditions varied from normoxic to hypoxic and when the neuronal activity was increased by increasing K+ concentration. This work demonstrates the capability of BNPs as a non-invasive tool in oxygen sensing and could provide fundamental insight into neuronal mechanisms and excitability research.

Recent developments in stimuli-responsive luminescent polymers composed of boron compounds

This review summarizes recent developments in stimuli-responsive luminescent polymers with boron chromophores, including three- and four-coordinated compounds. Sensing mechanisms based on the features of boron and polymer structures are described.

Labelling primary immune cells using bright blue fluorescent nanoparticles

Tracking cell movements is an important aspect of many biological studies. Reagents for cell tracking must not alter the biological state of the cell and must be bright enough to be visualized above background autofluorescence, a particular concern when imaging in tissue. Currently there are few reagents compatible with standard UV excitation filter sets (e.g. DAPI) that fulfill those requirements, despite the development of many dyes optimized for violet excitation (405 nm). A family of boron-based fluorescent dyes, difluoroboron β-diketonates, has previously served as bio-imaging reagents with UV excitation, offering high quantum yields and wide excitation peaks. In this study, we investigated the use of one such dye as a potential cell tracking reagent. A library of difluoroboron dibenzoylmethane (BF2dbm) conjugates were synthesized with biocompatible polymers including: poly(l-lactic acid) (PLLA), poly(ε-caprolactone) (PCL), and block copolymers with poly(ethylene glycol) (PEG). Dye-polymer conjugates were fabricated into nanoparticles, which were stable for a week at 37 °C in water and cell culture media, but quickly aggregated in saline. Nanoparticles were used to label primary splenocytes; phagocytic cell types were more effectively labelled. Labelling with nanoparticles did not affect cellular viability, nor basic immune responses. Labelled cells were more easily distinguished when imaged on a live tissue background than those labelled with a commercially available UV-excitable cytoplasmic labelling reagent. The high efficiency in terms of both fluorescence and cellular labelling may allow these nanoparticles to act as a short-term cell labelling strategy while wide excitation peaks offer utility across imaging and analysis platforms.

Dual-emissive, oxygen-sensing boron nanoparticles quantify oxygen consumption rate in breast cancer cells

SIGNIFICANCE

Decreasing the oxygen consumption rate (OCR) of tumor cells is a powerful method for ameliorating tumor hypoxia. However, quantifying the change in OCR is challenging in complex experimental systems.

AIM

We present a method for quantifying the OCR of two tumor cell lines using oxygen-sensitive dual-emissive boron nanoparticles (BNPs). We hypothesize that our BNP results are equivalent to the standard Seahorse assay.

APPROACH

We quantified the spectral emissions of the BNP and accounted for external oxygen diffusion to quantify OCR over 24 h. The BNP-computed OCR of two breast cancer cell lines, E0771 and 4T07, were compared with their respective Seahorse assays. Both cell lines were also irradiated to quantify radiation-induced changes in the OCR.

RESULTS

Using a Bland-Altman analysis, our BNPs OCR was equivalent to the standard Seahorse assay. Moreover, in an additional experiment in which we irradiated the cells at their 50% survival fraction, the BNPs were sensitive enough to quantify 24% reduction in OCR after irradiation.

CONCLUSIONS

Our results conclude that the BNPs are a viable alternative to the Seahorse assay for quantifying the OCR in cells. The Bland-Altman analysis showed that these two methods result in equivalent OCR measurements. Future studies will extend the OCR measurements to complex systems including 3D cultures and in vivo models, in which OCR measurements cannot currently be made.

A Perspective on Polylactic Acid-Based Polymers Use for Nanoparticles Synthesis and Applications

Polylactic acid (PLA)-based polymers are ubiquitous in the biomedical field thanks to their combination of attractive peculiarities: biocompatibility (degradation products do not elicit critical responses and are easily metabolized by the body), hydrolytic degradation in situ, tailorable properties, and well-established processing technologies. This led to the development of several applications, such as bone fixation screws, bioresorbable suture threads, and stent coating, just to name a few. Nanomedicine could not be unconcerned by PLA-based materials as well, where their use for the synthesis of nanocarriers for the targeted delivery of hydrophobic drugs emerged as a new promising application. The purpose of the here presented review is two-fold: on one side, it aims at providing a broad overview of PLA-based materials and their properties, which allow them gaining a leading role in the biomedical field; on the other side, it offers a specific focus on their recent use in nanomedicine, highlighting opportunities and perspectives.

Mechanofluorochromism of a Difluoroboron-β-Diketonate Derivative at the Nanoscale

Mechanofluorochromic nanoparticles have been prepared from a difluoroboron β-diketonate complex, and their behavior has been investigated at the nanoscale using atomic force microscopy (AFM) coupled with fluorescence spectroscopy. Two types of nanoparticles were observed, associated with green and yellow emission, reflecting the crystalline polymorphism of this material. While the green-emitting nanoparticles are mechanically insensitive under our conditions, the yellow-emitting ones display a marked hypsochromic shift upon shearing with the AFM tip. At the macroscopic level, the grinding of the bulk material is attributed to the amorphization of the crystalline powder. On the contrary, the marked mechanofluorochromism observed at the nanoscale is attributed to a crystal-to-crystal phase transition. This specific behavior at the nanolevel is extremely promising for applications such as nanoprobes of local mechanical stress.

Optimizing the Fluorescence Properties of Nanoemulsions for Single Particle Tracking in Live Cells

Nanoemulsions (NEs) are biocompatible lipid nanoparticles composed of an oily core stabilized by a surfactant shell. It is acknowledged that the surface decoration with poly(ethylene glycol), through the use of nonionic surfactants, confers high stealth in biological medium with reduced nonspecific interactions. Tracking individual NE by fluorescence microscopy techniques would lead to a better understanding of their behavior in cells and thus require the development of bright single particles with enhanced photostability. However, the understanding of the relationship between the physicochemical properties and chemical composition of the NEs, on the one hand, and its fluorescence properties of encapsulated dyes, on the other hand, remains limited. Herein, we synthesized three new dioxaborine barbituryl styryl (DBS) dyes that displayed high molar extinction coefficients (up to 120 000 M^-1 cm^-1) with relatively low quantum yields in solvents and impressive fluorescence enhancement when dissolved in viscous oils (up to 0.98). The reported screening of nine different oils allowed disclosing a range of efficient "oil/dye" couples and understanding the main parameters that lead to the brightest NEs. We determine vitamin E acetate/DBS-C₈ as the representative most efficient couple, combining high dye loading capabilities and low aggregation-induced quenching, leading to <50 nm ultrabright NEs (with brightness as high as 30 × 10⁶ M^-1 cm^-1) with negligible dye leakage in biological media. Beyond a comprehensive optical and physicochemical characterization of fluorescent NEs, cellular two-photon excitation imaging was performed with polymer-coated cell penetrating NEs. Thanks to their impressive brightness and photostability, NEs displaying different charge surfaces were microinjected in HeLa cells and were individually tracked in the cytosol to study their relative velocity.

Ultrabright and Fluorogenic Probes for Multicolor Imaging and Tracking of Lipid Droplets in Cells and Tissues

Lipid droplets (LDs) are intracellular lipid-rich organelles that regulate the storage of neutral lipids and were recently found to be involved in many physiological processes, metabolic disorders, and diseases including obesity, diabetes, and cancers. Herein we present a family of new fluorogenic merocyanine fluorophores based on an indolenine moiety and a dioxaborine barbiturate derivative. These so-called StatoMerocyanines (SMCy) fluoresce from yellow to the near-infrared (NIR) in oil with an impressive fluorescence enhancement compared to aqueous media. Additionally, SMCy display remarkably high molar extinction coefficients (up to 390 000 M^-1 cm^-1) and high quantum yield values (up to 100%). All the members of this new family specifically stain the LDs in live cells with very low background noise. Unlike Nile Red, a well-known lipid droplet marker, SMCy dyes possess narrow absorption and emission bands in the visible, thus allowing multicolor imaging. SMCy proved to be compatible with fixation and led to high-quality 3D images of lipid droplets in cells and tissues. Their high brightness allowed efficient tissue imaging of adipocytes and circulating LDs. Moreover their remarkably high two-photon absorption cross-section, especially SMCy5.5 (up to 13 300 GM), as well as their capacity to efficiently fluoresce in the NIR region led to two-photon multicolor tissue imaging (liver). Taking advantage of the available color palette, lipid droplet exchange between cells was tracked and imaged, thus demonstrating intercellular communication.

Meta-Alkoxy-Substituted Difluoroboron Dibenzoylmethane Complexes as Environment-Sensitive Materials

The optical properties of meta-alkoxy-substituted difluoroboron dibenzoylmethane dyes were investigated in solution and in the solid state. Meta-alkoxy substitution induced strong intramolecular charge transfer (ICT) from the oxygen-donating substituent to the halide and boron acceptors in the excited state, as compared to the π-π* transition that is observed with para-alkoxy substitution. The optical properties of para- and meta-substituted alkoxy boron dyes were evaluated by calculations, in dilute solution, and in solid-state films. When embedded in amorphous matrixes (e.g., PLA, PMMA, PS, cholesterol), all dyes showed fluorescence (F) and phosphorescence (P) emission. In this report, we show that meta-substitution resulted in enhanced solvatochromism and an increased phosphorescence-to-fluorescence ratio in solid-state films compared to analogous para-substituted samples. With enhanced phosphorescence intensity via the heavy-atom effect, iodo-substituted dyes were further studied in PLA-PEG nanoparticles. Oxygen calibrations revealed stronger phosphorescence and a greater oxygen-sensing range for the meta- versus para-alkoxy-substituted dyes, features that are important for oxygen-sensing materials design.

Novel Fluorescent Microemulsion: Probing Properties, Investigating Mechanism, and Unveiling Potential Application

Nanoscale microemulsions have been utilized as delivery carriers for nutraceuticals and active biological drugs. Herein, we designed and synthesized a novel oil in water (O/W) fluorescent microemulsion based on isoamyl acetate, polyoxyethylene castor oil EL (CrEL), and water. The microemulsion emitted bright blue fluorescence, thus exhibiting its potential for active drug detection with label-free strategy. The microemulsion exhibited excitation-dependent emission and distinct red shift with longer excitation wavelengths. Lifetime and quantum yield of fluorescent microemulsion were 2.831 ns and 5.0%, respectively. An excellent fluorescent stability of the microemulsion was confirmed by altering pH, ionic strength, temperature, and time. Moreover, we proposed a probable mechanism of fluorochromic phenomenon, in connection with the aromatic ring structure of polyoxyethylene ether substituent in CrEL. Based on our findings, we concluded that this new fluorescent microemulsion is a promising drug carrier that can facilitate active drug detection with a label-free strategy. Although further research is required to understand the exact mechanism behind its fluorescence property, this work provided valuable guidance to develop new biosensors based on fluorescent microemulsion.