Nanoscale Strategies for Light Harvesting

Laponite-activated AIE supramolecular assembly with modulating multicolor luminescence for logic digital encryption and perfluorinated pollutant detection

Recently, the non-covalently activated supramolecular scaffold method has become a prominent research area in the field of intelligent materials. Here, the inorganic clay (LP) promoted the AIE properties of 4,4',4″,4‴-(ethene-1,1,2,2-tetrayltetrakis(benzene-4,1-diyl))tetrakis(1-ethylpyridin-1-ium) (P-TPE), showing an astonishing 42-fold enhancement of the emission intensity of the yellow-green luminescence and a 34-fold increase of the quantum yield via organic-inorganic supramolecular strategy as well as the efficient light-harvesting properties (energy transfer efficiency up to 33 %) after doping with the dye receptor Rhodamine B. Furthermore, the full-color spectral regulation, including white light, was achieved by adjusting the ratio of the donor to the acceptor component and co-assembling with the carbon dots (CD). Interestingly, this TPE-based non-covalently activated full-color supramolecular light-harvesting system (LHS) could be achieved not only in aqueous media but also in the hydrogel and the solid state. More importantly, this panchromatic tunable supramolecular LHS exhibited the multi-mode and quadruple digital logic encryption property as well as the specific detection ability towards the perfluorobutyric acid and the perfluorobutanesulfonic acid, which are harmful to human health in drinking water. This result develops a simple, convenient and effective approach for the intelligent anti-counterfeiting and the pollutant sensing.

Semiconducting polymer dots for multifunctional integrated nanomedicine carriers

The expansion applications of semiconducting polymer dots (Pdots) among optical nanomaterial field have long posed a challenge for researchers, promoting their intelligent application in multifunctional nano-imaging systems and integrated nanomedicine carriers for diagnosis and treatment. Despite notable progress, several inadequacies still persist in the field of Pdots, including the development of simplified near-infrared (NIR) optical nanoprobes, elucidation of their inherent biological behavior, and integration of information processing and nanotechnology into biomedical applications. This review aims to comprehensively elucidate the current status of Pdots as a classical nanophotonic material by discussing its advantages and limitations in terms of biocompatibility, adaptability to microenvironments in vivo, etc. Multifunctional integration and surface chemistry play crucial roles in realizing the intelligent application of Pdots. Information visualization based on their optical and physicochemical properties is pivotal for achieving detection, sensing, and labeling probes. Therefore, we have refined the underlying mechanisms and constructed multiple comprehensive original mechanism summaries to establish a benchmark. Additionally, we have explored the cross-linking interactions between Pdots and nanomedicine, potential yet complete biological metabolic pathways, future research directions, and innovative solutions for integrating diagnosis and treatment strategies. This review presents the possible expectations and valuable insights for advancing Pdots, specifically from chemical, medical, and photophysical practitioners' standpoints.

Highly Ordered Nanoassemblies of Janus Spherocylindrical Nanoparticles Adhering to Lipid Vesicles

In recent years, there has been a heightened interest in the self-assembly of nanoparticles (NPs) that is mediated by their adsorption onto lipid membranes. The interplay between the adhesive energy of NPs on a lipid membrane and the membrane's curvature energy causes it to wrap around the NPs. This results in an interesting membrane curvature-mediated interaction, which can lead to the self-assembly of NPs on lipid membranes. Recent studies have demonstrated that Janus spherical NPs, which adhere to lipid vesicles, can self-assemble into well-ordered nanoclusters with various geometries, including a few Platonic solids. The present study explores the additional effect of geometric anisotropy on the self-assembly of Janus NPs on lipid vesicles. Specifically, the current study utilized extensive molecular dynamics simulations to investigate the arrangement of Janus spherocylindrical NPs on lipid vesicles. We found that the additional geometric anisotropy significantly expands the range of NPs' self-assemblies on lipid vesicles. The specific geometries of the resulting nanoclusters depend on several factors, including the number of Janus spherocylindrical NPs adhering to the vesicle and their aspect ratio. The lipid membrane-mediated self-assembly of NPs, demonstrated by this work, provides an alternative cost-effective route for fabricating highly engineered nanoclusters in three dimensions. Such structures, with the current wide range of material choices, have great potential for advanced applications, including biosensing, bioimaging, drug delivery, nanomechanics, and nanophotonics.

The characterization of plant derived-carbon dots and its responses on chlorophyll a fluorescence kinetics, radical accumulation in guard cells, cellular redox state and antioxidant system in chromium stressed-Lactuca sativa

Based on their chemical structure and catalytic features, carbon dots (CDs) demonstrate great advantages for agricultural systems. The improvements in growth, photosynthesis, nutrient assimilation and resistance are provided by CDs treatments under control or adverse conditions. However, there is no data on how CDs can enhance the tolerance against chromium toxicity on gas exchange, photosynthetic machinery and ROS-based membrane functionality. The present study was conducted to evaluate the impacts of the different concentrations of orange peel derived-carbon dots (50-100-200-500 mg L-1 CD) on growth, chlorophyll fluorescence, phenomenological fluxes between photosystems, photosynthetic performance, ROS accumulation and antioxidant system under chromium stress (Cr, 100 μM chromium (VI) oxide) in Lactuca sativa. CDs removed the Cr-reduced changes in growth (RGR), water content (RWC) and proline (Pro) content. Compared to stress, CD exposures caused an alleviation in carbon assimilation rate, stomatal conductance, transpiration rate, carboxylation efficiency, chlorophyll fluorescence (Fv/Fm) and potential photochemical efficiency (Fv/Fo). Cr toxicity disrupted the energy fluxes (ABS/RC, TRo/RC, ETo/RC and DIo/RC), quantum yields and, efficiency (ΨEo and φRo), dissipation of energy (DIo/RC) and performance index (PIABS and PItotal). An amelioration in these parameters was provided by CD addition to Cr-applied plants. Stressed plants had high activities of superoxide dismutase (SOD), peroxidase (POX) and ascorbate peroxidase (APX), which could not prevent the increase of H2O2 and lipid peroxidation (TBARS content). While all CDs induced SOD and catalase (CAT) in response to stress, POX and enzyme/non-enzymes related to ascorbate-glutathione (AsA-GSH) cycle (APX, monodehydroascorbate reductase (MDHAR) and dehydroascorbate reductase (DHAR), the contents of AsA and, GSH) were activated by 50-100-200 mg L-1 CD. CDs were able to protect the AsA regeneration, GSH/GSSG and GSH redox status. The decreases in H2O2 content might be attributed to the increased activity of glutathione peroxidase (GPX). Therefore, all CD applications minimized the Cr stress-based disturbances (TBARS content) by controlling ROS accumulation, antioxidant system and photosynthetic machinery. In conclusion, CDs have the potential to be used as a biocompatible inducer in removing the adverse effects of Cr stress in lettuce plants.

Fluorescent metal nanoclusters: prospects for photoinduced electron transfer and energy harvesting

Research on noble metal nanoclusters (MNCs) (elements with filled electron d-bands) is progressing forward because of the extensive and extraordinary chemical, optical, and physical properties of these materials. Because of the ultrasmall size of the MNCs (typically within 1-3 nm), they can be applied in areas of nearly all possible scientific domains. The greatest advantage of MNCs is the tunability that can be imposed, not only on their structures, but also on their chemical, physical, and biological properties. Nowadays, MNCs are very effectively used as energy donors and acceptors under suitable conditions and hence act as energy harvesters in solar cells, semiconductors, and biomarkers. In addition, ultrafast photoinduced electron transfer (PET) can be practised using MNCs under various circumstances. Herein, we have focused on the energy harvesting phenomena of Au-, Ag-, and Cu-based MNCs and elaborated on different ways to apply them.

Ultrafast energy transfer dynamics in CsPbBr3 nanoplatelets-BODIPY heterostructure

Understanding and directing the energy transfer in nanocrystals-chromophore heterostructure is critical to improve the efficiency of their photocatalytic and optoelectronic applications. In this work, we studied the energy transfer process between inorganic-organic molecular complexes composed of cesium halide perovskite nanoplatelets (CsPbBr3 NPLs) and boron dipyrromethene (BODIPY) by photoluminescence spectroscopy (PL), time-correlated single photon-counting (TCSPC) and femtosecond transient absorption spectroscopy. The quenching of PL in CsPbBr3 NPLs occurred simultaneously with the PL enhancement of BODIPY implied the singlet energy transfer process. The rate of energy transfer has been determined by transient absorption spectrum as kET = 3.8 × 109 s-1. The efficiency of Förster energy transfer (FRET) has been quantitatively calculated up to 70%. Our work advances the understanding of the interaction between BODIPY and perovskite nanoplatelets, providing a new solution based on their optoelectronic and photocatalytic applications.

Nanoparticles insertion and dimerization in polymer brushes

Molecular dynamics simulations are conducted to systematically investigate the insertion of spherical nanoparticles (NPs) in polymer brushes as a function of their size, strength of their interaction with the polymers, polymer grafting density, and polymer chain length. For attractive interactions between the NPs and the polymers, the depth of NPs' penetration in the brush results from a competition between the enthalpic gain due to the favorable polymer-NP interaction and the effect of osmotic pressure resulting from displaced polymers by the NP's volume. A large number of simulations show that the average depth of the NPs increases by increasing the strength of the interaction strength. However, it decreases by increasing the NPs' diameter or increasing the polymer grafting density. While the NPs' effect on the polymer density is local, their effect on their conformations is long-ranged and extends laterally over length scales larger than the NP's size. This effect is manifested by the emergence of laterally damped oscillations in the normal component of the chains' radius of gyration. Interestingly, we found that for high enough interaction strength, two NPs dimerize in the polymer brush. The dimer is parallel to the substrate if the NPs' depth in the brush is shallow. However, the dimer is perpendicular to the substrate if the NPs' are deep in the brush. These results imply that polymer brushes can be used as a tool to localize and self-assemble NPs in polymer brushes.

Tuning ultrafast time-evolution of photo-induced charge-transfer states: A real-time electronic dynamics study in substituted indenotetracene derivatives

Photo-induced charge transfer (CT) states are pivotal in many technological and biological processes. A deeper knowledge of such states is mandatory for modeling the charge migration dynamics. Real-time time-dependent density functional theory (RT-TD-DFT) electronic dynamics simulations are employed to explicitly observe the electronic density time-evolution upon photo-excitation. Asymmetrically substituted indenotetracene molecules, given their potential application as n-type semiconductors in organic photovoltaic materials, are here investigated. Effects of substituents with different electron-donating characters are analyzed in terms of the overall electronic energy spacing and resulting ultrafast CT dynamics through linear response (LR-)TD-DFT and RT-TD-DFT based approaches. The combination of the computational techniques here employed provided direct access to the electronic density reorganization in time and to its spatial and rational representation in terms of molecular orbital occupation time evolution. Such results can be exploited to design peculiar directional charge dynamics, crucial when photoactive materials are used for light-harvesting applications.

Carbazole-based artificial light-harvesting system for photocatalytic cross-coupling dehydrogenation reaction

A carbazole-based artificial light-harvesting system (LHS) was successfully fabricated based on the supramolecular assembly of AIE-enhanced donor (CTD), water-soluble phosphate-pillar[5]arene (WPP5), and eosin Y (ESY) acceptor. The formed WPP5-CTD possessed remarkable AIE emission, featuring an ideal energy donor for light harvesting. After encapsulation of ESY, the energy of WPP5-CTD was efficiently transferred to ESY in WPP5-CTD-ESY, and the antenna effect was 38.5, which was much higher than that of recently reported LHSs. Notably, WPP5-CTD-ESY was successfully utilized as a photocatalyst to realize the cross-coupling dehydrogenation reaction of diphenylphosphine oxide and benzothiazole derivatives, suggesting great potential for aqueous photocatalytic applications of this LHS.

Near-Infrared Light-Driven Photocatalysis with an Emphasis on Two-Photon Excitation: Concepts, Materials, and Applications

Efficient utilization of sunlight in photocatalysis is widely recognized as a promising solution for addressing the growing energy demand and environmental issues resulting from fossil fuel consumption. Recently, there have been significant developments in various near-infrared (NIR) light-harvesting systems for artificial photosynthesis and photocatalytic environmental remediation. This review provides an overview of the most recent advancements in the utilization of NIR light through the creation of novel nanostructured materials and molecular photosensitizers, as well as modulating strategies to enhance the photocatalytic processes. A special focus is given to the emerging two-photon excitation NIR photocatalysis. The unique features and limitations of different systems are critically evaluated. In particular, it highlights the advantages of utilizing NIR light and two-photon excitation compared to UV-visible irradiation and one-photon excitation. Ongoing challenges and potential solutions for the future exploration of NIR light-responsive materials are also discussed.

Bioinspired polymeric supramolecular columns as efficient yet controllable artificial light-harvesting platform

Light-harvesting is an indispensable process in photosynthesis, and researchers have been exploring various structural scaffolds to create artificial light-harvesting systems. However, achieving high donor/acceptor ratios for efficient energy transfer remains a challenge as excitons need to travel longer diffusion lengths within the donor matrix to reach the acceptor. Here, we report a polymeric supramolecular column-based light-harvesting platform inspired by the natural light-harvesting of purple photosynthetic bacteria to address this issue. The supramolecular column is designed as a discotic columnar liquid crystalline polymer and acts as the donor, with the acceptor intercalated within it. The modular columnar design enables an ultrahigh donor/acceptor ratio of 20000:1 and an antenna effect exceeding 100. Moreover, the spatial confinement within the supramolecular columns facilitates control over the energy transfer process, enabling dynamic full-color tunable emission for information encryption applications with spatiotemporal regulation security.

An anti-freeze fluorescent organogel with rapid shape-forming properties for constructing artificial light harvesting systems used in extremely cold environments

Using polyvinyl alcohol (PVA) and perylene-3,9-dicarboxylic acid (PDA) as raw materials, a new anti-freeze (-50 °C) fluorescent organogel with rapid shape-forming (2 h) properties was synthesised based on a certain proportion of the binary solvent of N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Then, an artificial light-harvesting system (ALHS) used in extremely cold environments was successfully constructed by mixing fluorescent dyes sulphorhodamine101 (SR101) and rhodamine 6G (R6G) into them as acceptors.

Extending Infrared Emission via Energy Transfer in a CsPbI3-Cyanine Dye Hybrid

Directing energy flow in light harvesting assemblies of nanocrystal-chromophore hybrid systems requires a better understanding of factors that dictate excited-state processes. In this study, we explore excited-state interactions within the CsPbI3-cyanine dye (IR125) hybrid assembly through a comprehensive set of steady-state and time-resolved absorption and photoluminescence (PL) experiments. Our photoluminescence investigations reveal the quenching of CsPbI3 emission alongside the simultaneous enhancement of IR125 fluorescence, providing evidence for a singlet energy transfer. The evaluation of both photoluminescence (PL) quenching and PL decay measurements yield ∼94% energy transfer efficiency for the CsPbI3-IR125 hybrid assembly. Transient absorption spectroscopy further unveils that this singlet energy transfer process operates on an ultrafast time scale, occurring within 400 ps with a rate constant of energy transfer of 1.4 × 1010 s-1. Our findings highlight the potential of the CsPbI3-IR125 hybrid assembly to extend the emission of halide perovskites into the infrared region, paving the way for light energy harvesting and display applications.

Controlling Charge Carrier Dynamics in Porphyrin Nanorings by Optically Active Templates

Understanding the dynamics of photogenerated charge carriers is essential for enhancing the performance of solar and optoelectronic devices. Using atomistic quantum dynamics simulations, we demonstrate that a short π-conjugated optically active template can be used to control hot carrier relaxation, charge carrier separation, and carrier recombination in light-harvesting porphyrin nanorings. Relaxation of hot holes is slowed by 60% with an optically active template compared to that with an analogous optically inactive template. Both systems exhibit subpicosecond electron transfer from the photoactive core to the templates. Notably, charge recombination is suppressed 6-fold by the optically active template. The atomistic time-domain simulations rationalize these effects by the extent of electron and hole localization, modification of the density of states, participation of distinct vibrational motions, and changes in quantum coherence. Extension of the hot carrier lifetime and reduction of charge carrier recombination, without hampering charge separation, demonstrate a strategy for enhancing efficiencies of energy materials with optically active templates.

Size-Dependent Cytotoxicity, Adhesion, and Endocytosis of Micro-/Nano-hydroxyapatite Crystals in HK-2 Cells

Nano-hydroxyapatite (nano-HAP) is often used as a crystal nest to induce calcium oxalate (CaOx) kidney stone formation, but the mechanism of interaction between HAP crystals of different properties and renal tubular epithelial cells remains unclear. In this study, the adhesion and endocytosis of HAP crystals with sizes of 40 nm, 70 nm, 1 μm, and 2 μm (HAP-40 nm, HAP-70 nm, HAP-1 μm, and HAP-2 μm, respectively) to human renal proximal tubular epithelial cells (HK-2) were comparatively studied. The results showed that HAP crystals of all sizes promoted the expression of osteopontin and hyaluronic acid on the cell surface, destroyed the integrity of the lysosomes, and induced the apoptosis and necrosis of cells. Nano-HAP crystals had a higher specific surface area, a smaller contact angle, a higher surface energy, and a lower Zeta potential than those of micro-HAP. Therefore, the abilities of HK-2 cells to adhere to and endocytose nano-HAP crystals were greater than their abilities to do the same for micro-HAP crystals. The order of the endocytosed crystals was as follows: HAP-40 nm > HAP-70 nm > HAP-1 μm > HAP-2 μm. The endocytosed HAP crystals entered the lysosomes. The more crystal endocytosis and adhesion there is, the more toxic it is to HK-2 cells. The results of this study showed that nanosized HAP crystals greatly promoted the formation of kidney stones than micrometer-sized HAP crystals.

Nanoreactor-based catalytic systems for therapeutic applications: Principles, strategies, and challenges

Inspired by natural catalytic compartments, various synthetic compartments that seclude catalytic reactions have been developed to understand complex multistep biosynthetic pathways, bestow therapeutic effects, or extend biosynthetic pathways in living cells. These emerging nanoreactors possessed many advantages over conventional biomedicine, such as good catalytic activity, specificity, and sustainability. In the past decade, a great number of efficient catalytic systems based on diverse nanoreactors (polymer vesicles, liposome, polymer micelles, inorganic-organic hybrid materials, MOFs, etc.) have been designed and employed to initiate in situ catalyzed chemical reactions for therapy. This review aims to present the recent progress in the development of catalytic systems based on nanoreactors for therapeutic applications, with a special emphasis on the principles and design strategies. Besides, the key components of nanoreactor-based catalytic systems, including nanocarriers, triggers or energy inputs, and products, are respectively introduced and discussed in detail. Challenges and prospects in the fabrication of therapeutic catalytic nanoreactors are also discussed as a conclusion to this review. We believe that catalytic nanoreactors will play an increasingly important role in modern biomedicine, with improved therapeutic performance and minimal side effects.

Photothermal Microscopy and Spectroscopy with Nanomechanical Resonators

In nanomechanical photothermal absorption spectroscopy and microscopy, the measured substance becomes a part of the detection system itself, inducing a nanomechanical resonance frequency shift upon thermal relaxation. Suspended, nanometer-thin ceramic or 2D material resonators are innately highly sensitive thermal detectors of localized heat exchanges from substances on their surface or integrated into the resonator itself. Consequently, the combined nanoresonator-analyte system is a self-measuring spectrometer and microscope responding to a substance's transfer of heat over the entire spectrum for which it absorbs, according to the intensity it experiences. Limited by their own thermostatistical fluctuation phenomena, nanoresonators have demonstrated sufficient sensitivity for measuring trace analyte as well as single particles and molecules with incoherent light or focused and wide-field coherent light. They are versatile in their design, support various sampling methods-potentially including hydrated sample encapsulation-and hyphenation with other spectroscopic methods, and are capable in a wide range of applications including fingerprinting, separation science, and surface sciences.

Construction of an efficient artificial light-harvesting system based on hyperbranched polyethyleneimine and improvement of photocatalytic performance

An artificial light-harvesting system (ALHS) was developed in aqueous solution by employing the electrostatic co-assembly of a tetraphenylethylene derivative modified with two sulfonate groups (TPE-BSBO) and hyperbranched polyethyleneimine (PEI) as the energy donors, and 4,7-bis(2-thienyl)-2,1,3-benzothiadiazole (DBT) as the energy acceptors. The ALHS exhibits not only high efficiency in energy transfer and conversion but also a significant enhancement in the generation of reactive oxygen species (ROS), especially superoxide anion radicals (O2˙-), facilitating its utilization in photocatalytic oxidation reactions.

Efficient Strategies to Use β-Cationic Porphyrin-Imidazolium Derivatives in the Photoinactivation of Methicillin-Resistant Staphylococcus aureus

Bacterial resistance to antibiotics is a critical global health issue and the development of alternatives to conventional antibiotics is of the upmost relevance. Antimicrobial photodynamic therapy (aPDT) is considered a promising and innovative approach for the photoinactivation of microorganisms, particularly in cases where traditional antibiotics may be less effective due to resistance or other limitations. In this study, two β-modified monocharged porphyrin-imidazolium derivatives were efficiently incorporated into polyvinylpyrrolidone (PVP) formulations and supported into graphitic carbon nitride materials. Both porphyrin-imidazolium derivatives displayed remarkable photostability and the ability to generate cytotoxic singlet oxygen. These properties, which have an important impact on achieving an efficient photodynamic effect, were not compromised after incorporation/immobilization. The prepared PVP-porphyrin formulations and the graphitic carbon nitride-based materials displayed excellent performance as photosensitizers to photoinactivate methicillin-resistant Staphylococcus aureus (MRSA) (99.9999% of bacteria) throughout the antimicrobial photodynamic therapy. In each matrix, the most rapid action against S. aureus was observed when using PS 2. The PVP-2 formulation needed 10 min of exposure to white light at 5.0 µm, while the graphitic carbon nitride hybrid GCNM-2 required 20 min at 25.0 µm to achieve a similar level of response. These findings suggest the potential of graphitic carbon nitride-porphyrinic hybrids to be used in the environmental or clinical fields, avoiding the use of organic solvents, and might allow for their recovery after treatment, improving their applicability for bacteria photoinactivation.

Non-close-packed hexagonal self-assembly of Janus nanoparticles on planar membranes

The adhesion modes of an ensemble of spherical Janus nanoparticles on planar membranes are investigated through large-scale molecular dynamics simulations of a coarse-grained implicit-solvent model. We found that the Janus nanoparticles adhering to planar membranes exhibit a rich phase behavior that depends on their adhesion energy density and areal number density. In particular, effective repulsive membrane-curvature-mediated interactions between the Janus nanoparticles lead to their self-assembly into an ordered hexagonal superlattice at intermediate densities and intermediate to high adhesion energy density, with a lattice constant determined by their areal density. The melting behavior of the hexagonal superlattice proceeds through a two-stage melting scenario in agreement with the Kosterlitz-Thouless-Halperin-Nelson-Young classical theory of two-dimensional melting.

Construction of Covalent Organic Cages with Aggregation-Induced Emission Characteristics from Metallacages for Mimicking Light-Harvesting Antenna

A series of covalent organic cages built from fluorophores capable of aggregation-induced emission (AIE) were elegantly prepared through the reduction of preorganized M2 (LA )3 (LB )2 -type metallacages, simultaneously taking advantage of the synthetic accessibility and well-defined shapes and sizes of metallacages, the good chemical stability of the covalent cages as well as the bright emission of AIE fluorophores. Moreover, the covalent cages could be further post-synthetically modified into an amide-functionalized cage with a higher quantum yield. Furthermore, these presented covalent cages proved to be good energy donors and were used to construct light-harvesting systems employing Nile Red as an energy acceptor. These light-harvesting systems displayed efficient energy transfer and relatively high antenna effect, which enabled their use as efficient photocatalysts for a dehalogenation reaction. This research provides a new avenue for the development of luminescent covalent cages for light-harvesting and photocatalysis.

Ag/ZnO core-shell NPs boost photosynthesis and growth rate in wheat seedlings under simulated full sun spectrum

Breeding programs rely on light wavelength, intensity, and photoperiod for rapid success. In this study, we investigated the ability of Ag/ZnO nanoparticles (NPs) to improve the photosynthesis and growth of wheat under simulated full solar spectrum conditions. The world population is increasing rapidly, it is necessary to increase the number of crops in order to ensure the world's food security. Conventional breeding is time-consuming and expensive, so new techniques such as rapid breeding are needed. Rapid breeding shows promise in increasing crop yields by controlling photoperiod and environmental factors in growth regulators. However, achieving optimum growth and photosynthesis rates is still a challenge. Here, we used various methods to evaluate the effects of Ag/ZnO NPs on rice seeds. Using bioinformatics simulations, we evaluated the light-harvesting efficiency of chlorophyll a in the presence of Ag/ZnO NPs. Chemically synthesized Ag/ZnO nanoparticles were applied to rice grains at different concentrations (0-50 mg/L) and subjected to a 12-h preparation time. Evaluation of seed germination rate and growth response in different light conditions using a Light Emitting Diode (LED) growth chamber that simulates a rapid growth system. The analysis showed that the surface plasmon resonance of Ag/ZnO NPs increased 38-fold, resulting in a 160-fold increase in the light absorption capacity of chlorophyll. These estimates are supported by experimental results showing an 18% increase in the yield of rice seeds treated with 15 mg/L Ag/ZnO NPs. More importantly, the treated crops showed a 2.5-fold increase in growth and a 1.4-fold increase in chlorophyll content under the simulated full sun spectrum (4500 lx) and a 16-h light/8-h dark photoperiod. More importantly, these effects are achieved without oxidative or lipid peroxidative damage. Our findings offer a good idea to increase crop growth by improving photosynthesis using Ag/ZnO nanoparticle mixture. To develop this approach, future research should go towards optimizing nanoparticles, investigating the long-term effects, and exploring the applicability of this process in many products. The inclusion of Ag/ZnO NPs in rapid breeding programs has the potential to transform crops by reducing production and increasing agricultural productivity.

Manipulating multi-spectral slow photons in bilayer inverse opal TiO2@BiVO4 composites for highly enhanced visible light photocatalysis

Manipulation of light has been proved to be a promising strategy to increase light harvesting in solar-to-chemical energy conversion, especially in photocatalysis. Inverse opal (IO) photonic structures are highly promising for light manipulation as their periodic dielectric structures enable them to slow down light and localize it within the structure, thereby improving light harvesting and photocatalytic efficiency. However, slow photons are confined to narrow wavelength ranges and hence limit the amount of energy that can be captured through light manipulation. To address this challenge, we synthesized bilayer IO TiO₂@BiVO₄ structures that manifested two distinct stop band gap (SBG) peaks, arising from different pore sizes in each layer, with slow photons available at either edge of each SBG. In addition, we achieved precise control over the frequencies of these multi-spectral slow photons through pore size and incidence angle variations, that enabled us to tune their wavelengths to the electronic absorption of the photocatalyst for optimal light utilization in aqueous phase visible light photocatalysis. This first proof of concept involving multi-spectral slow photon utilization enabled us to achieve up to 8.5 times and 2.2 times higher photocatalytic efficiencies than the corresponding non-structured and monolayer IO photocatalysts respectively. Through this work, we have successfully and significantly improved light harvesting efficiency in slow photon-assisted photocatalysis, the principles of which can be extended to other light harvesting applications.

Dye-induced photoluminescence quenching of quantum dots: role of excited state lifetime and confinement of charge carriers

We investigate the role of quantum confinement and photoluminescence (PL) lifetime of photoexcited charge carriers in semiconductor core/shell quantum dots (QDs) via PL quenching due to surface modification. Surface modification is controlled by varying the number of dye molecules adsorbed onto the QD shell surface forming QD-dye nanoassemblies. We selected CuInS₂/ZnS (CIS) and InP/ZnS (InP) core/shell QDs exhibiting relatively weak (664 meV) and strong (1194 meV) confinement potentials for the conduction band electron. Moreover, the difference in the emission mechanism gives rise to a long and short excited state lifetime of CIS (ca. 290 ns) and InP (ca. 37 ns) QDs. Dye molecules of different ionic characters (rhodamine 575: zwitterionic and rhodamine 560: cationic) are used as quenchers. A detailed analysis of Stern-Volmer data shows that (i) quenching is generally more pronounced in CIS-dye assemblies as compared to InP-dye assemblies, (ii) dynamic quenching is dominating in all QD-dye assemblies with only a minor contribution from static quenching and (iii) the cationic dye shows a stronger interaction with the QD shell surface than the zwitterionic dye. Observations (i) and (ii) can be explained by the differences in the amplitude of the electronic component of the exciton wavefunction near the dye binding sites in both QDs, which results in the breaking up of the electron-hole pair and favors charge trapping. Observation (iii) can be attributed to the variations in electrostatic interactions between the negatively charged QD shell surface and the cationic and zwitterionic dyes, with the former exhibiting a stronger interaction. Moreover, the long lifetime of CIS QDs facilitates us to easily probe different time scales of the trapping processes and thus differentiate the origins of static and dynamic quenching components that appear in the Stern-Volmer analysis.

Surfactant-Tunable Nanoparticle Assembly via a Template-Directed Strategy

Nanoparticle (NP) self-assembly from suspension evaporation has been a topic of interest in recent times to fabricate a solid-state structure with diverse functions. We present a simple and facile evaporation-induced strategy for the formation of NP arrays on a flat substrate utilizing a template-directed sandwich system. The lithographic features assist the assembly of the typical nanoparticles (NPs), including SiO₂, QDs@PS FMs, and QDs, on the top into circle, stripe, triangle, or square geometries with a fixed width of 2 μm. Additionally, an anionic surfactant, sodium dodecyl sulfonate (SDS), is incorporated into a negatively charged, hydrophilic SiO₂ dispersion to govern the aggregation and self-assembly of NPs, fine tuning the morphologies of the residual structures on the substrate. SDS is attributed to modify the nature of SiO₂ NPs to be hydrophobic, increase the hydrophobic attraction, dominating particle-particle and particle-interface interactions, and strengthen the particle-particle repulsive electrostatic force that results in the reduction of SiO₂ NPs trapped in the separated colloidal suspension drop. Thus, using the SDS surfactant with the concentration ranging from 0 to 1 wt %, the obtained well-ordered SiO₂ NP pattern packing on the substrate varies from six layers to one layer.

Luminescent [CO2@Ag20(SAdm)10(CF3COO)10(DMA)2] nanocluster: synthetic strategy and its implication towards white light emission

Owing to the quantized size and associated discrete energy levels, atomically precise silver nanoclusters (Ag NCs) hold great potential for designing functional luminescent materials. However, the thermally activated non-radiative transition of Ag(I)-based NCs has faded the opportunities. To acquire the structurally rigid architecture of cluster nodes for constraining such transitions, a new synthetic approach is unveiled here that utilizes a neutral template as a cluster-directing agent to assemble twenty Ag(I) atoms that ensure the maximum number of surface-protecting ligand attachment possibilities in a particular solvent medium. The solvent polarity triggers the precise structural design to circumvent the over-reliance of the templates, which results in the formation of [CO₂@Ag₂₀(SAdm)₁₀(CF₃COO)₁₀(DMA)₂] NC (where SAdm = 1-adamantanethiolate and DMA = N,N-dimethylacetamide) exhibiting an unprecedented room-temperature photoluminescence emission. The high quantum yield of the generated blue emission ensures its candidature as an ideal donor for artificial light-harvesting system design, and it is utilized with the two-step sequential energy transfer process, which finally results in the generation of ideal white light. For implementing perfect white light emission, the required chromophores in the green and red emission regions were chosen based on their effective spectral overlap with the donor components. Due to their favorable energy-level distribution, excited state energy transfers occurred from the NC to β-carotene at the initial step, then from the conjugate of the NC and β-carotene to another chromophore, Nile Blue, at the second step via a sequential Förster resonance energy transfer pathway.

Conjugated Polymer Nanoparticles for Tumor Theranostics

Water-dispersible conjugated polymer nanoparticles (CPNs) have demonstrated great capabilities in biological applications, such as in vitro cell/subcellular imaging and biosensing, or in vivo tissue imaging and disease treatment. In this review, we summarized the recent advances of CPNs used for tumor imaging and treatment during the past five years. CPNs with different structures, which have been applied to in vivo solid tumor imaging (fluorescence, photoacoustic, and dual-modal) and treatment (phototherapy, drug carriers, and synergistic therapy), are discussed in detail. We also demonstrated the potential of CPNs as cancer theranostic nanoplatforms. Finally, we discussed current challenges and outlooks in this field.

Lipid vesicles induced ordered nanoassemblies of Janus nanoparticles

Since many advanced applications require specific assemblies of nanoparticles (NPs), considerable efforts have been made to fabricate nanoassemblies with specific geometries. Although nanoassemblies can be fabricated through top-down approaches, recent advances show that intricate nanoassemblies can also be obtained through self-assembly, mediated for example by DNA strands. Here, we show, through extensive molecular dynamics simulations, that highly ordered self-assemblies of NPs can be mediated by their adhesion to lipid vesicles (LVs). Specifically, Janus NPs are considered so that the amount by which they are wrapped by the LV is controlled. The specific geometry of the nanoassembly is the result of effective curvature-mediated repulsion between the NPs and the number of NPs adhering to the LV. The NPs are arranged on the LV into polyhedra which satisfy the upper limit of Euler's polyhedral formula, including several deltahedra and three Platonic solids, corresponding to the tetrahedron, octahedron, and icosahedron.

Metalloporphyrin modified defective TiO2 porous cages with the enhanced photocatalytic activity for coupling of hydrogen generation and tetracycline removal

Integration of molecular transition-metal complexes and semiconductors is an appealing method to develop high-performance hybrid photocatalysts based on improvement of their solar energy harvesting ability and photogenerated charge carrier separation efficiency. Herein, Cu-TCPP modified TiO₂ porous cages with oxygen vacancy defects, derived from NH₂-MIL-125(Ti) nanocrystals, are successfully prepared to form PC-TiO₂-d/Cu-TCPP hybrids via a surface assembly process. The PC-TiO₂-d/Cu-TCPP hybrid shows an enhanced photodegradation efficiency (73.7%, 95.4%) towards tetracycline in the air under visible light or the simulated sunlight irradiation compared to PC-TiO₂-d (33.7%, 81.1%) within 100 min. Moreover, the photocatalytic system is applicable to coupling both processes of solar fuel production and pollutant degradation. The PC-TiO₂-d/Cu-TCPP hybrid exhibits a high hydrogen evolution rate of ∼2 mmol g^-1 h^-1 in the aqueous solution of tetracycline in an inert atmosphere upon irradiation by the simulated sunlight. In contrast, an inferior photocatalytic performance of hydrogen evolution is observed in pure water without the addition of tetracycline. Finally, the high sustainability of PC-TiO₂-d/Cu-TCPP is mainly attributed to the strong interaction between the molecular photosensitizer and the semiconductor photocatalyst by oxygen vacancies and Cu(ii) ions.

Hierarchically Organized Cocrystal of Tetra-Anionic Porphyrin and Di-Cationic Viologen: Ion Conformations, Supramolecule Interactions, and Porphyrin Arrays

Ionic co-assembly of tetra-anionic porphyrins has been extensively researched in the construction of hierarchically organized architectures with potential application value in organic semiconductors, sunlight catalysts and supramolecular chirality systems. However, such architectures are difficult to grow to a size suitable for single-crystal X-ray diffraction (SCXRD); the lack of single-crystal structures of these architectures leads to challenges in gaining deeper comprehension about that. This study reports a hierarchically organized cocrystal of meso-tetra(4-sulfonato-phenyl)-porphyrin (TSPP^4- ) and N, N'-diethyl-viologen (DEV²⁺ ), wherein wave-like and saddle-like TSPP^4- ions co-aggregate at a stoichiometric ratio of 1 : 2 to form unique porphyrin arrays; the spectrum characteristics and calculated coulombic exciton coupling energy show that these porphyrin arrays are J-aggregates. We prove that the distortion of porphyrin ring of TSPP^4- strongly correlates with the deflection of its phenyl groups. The crystal comprises six different ionic conformations, and the multiplicity of ionic conformation leads to intricate supramolecular interactions.

Membrane-mediated dimerization of spherocylindrical nanoparticles

We present a numerical investigation of the modes of adhesion and endocytosis of two spherocylindrical nanoparticles (SCNPs) on planar and tensionless lipid membranes, using systematic molecular dynamics simulations of an implicit-solvent model, with varying values of the SCNPs' adhesion strength and dimensions. We found that at weak values of the adhesion energy per unit of area, ξ, the SCNPs are monomeric and adhere to the membrane in the parallel mode. As ξ is slightly increased, the SCNPs dimerize into wedged dimers, with an obtuse angle between their major axes that decreases with increasing ξ. However, as ξ is further increased, we found that the final adhesion state of the two SCNPs is strongly affected by the initial distance, d₀, between their centers of mass, upon their adhesion. Namely, the SCNPs dimerize into wedged dimers, with an acute angle between their major axes, if d₀ is relatively small. However, for relatively high d₀, they adhere individually to the membrane in the monomeric normal mode. For even higher values of ξ and small values of d₀, the SCNPs cluster into tubular dimers. However, they remain monomeric if d₀ is high. Finally, the SCNPs endocytose either as a tubular dimer, if d₀ is low or as monomers for large d₀, with the onset value of ξ of dimeric endocytosis being lower than that of monomeric endocytosis. Dimeric endocytosis requires that the SCNPs adhere simultaneously at nearby locations.

From 8- to 18-Cluster Electrons Superatoms: Evaluation via DFT Calculations of the Ligand-Protected W@Au12(dppm)6 Cluster Displaying Distinctive Electronic and Optical Properties

The iconic W@Au₁₂ icosahedral bare cluster reaches the favorable closed-shell superatomic electron configuration 1S² 1P⁶ 1D¹⁰, making it an 18-cluster electron (18-ce) superatom. Here, we pursue the evaluation of a ligand-protected counterpart based on the construction of a fully phosphine-protected [W@Au₁₂(dppm)₆] cluster strongly related to the characterized [Au₁₃(dppm)₆]⁵⁺ homometallic counterpart. The later cluster has the same total number of valence electrons as the former but is considered an 8-ce superatom with 1S² 1P⁶ configuration. The fundamental differences between 8- and 18-ce species are investigated. The character of the frontier orbitals varies from 1P/1D in the 8-ce case to a 1D/ligand for 18-ce species, enabling an efficient charge transfer toward the ligands upon irradiation, being interesting for electron injection in optoelectronic devices and black absorbers applications. Excited-state properties are also revisited, showing different geometrical and electronic structure variations between 8- and 18-ce species. Moreover, the continuum between the 8- and 18-ce limits has been explored by varying the nature of the encapsulated dopant between group 6 and group 11. The transition between the 8- and 18-ce counts can be formally situated between Pt (8-ce) and Ir (18-ce). Thus, 18-ce derivatives obtained as doped counterparts of homometallic gold clusters can introduce useful alternatives to achieve different properties in related structural motifs, which can be further explored owing to their extension of the well-established versatility of current gold nanoclusters.

Structural Engineering of Ionic MOF@COF Heterointerface for Exciton-Boosting Sunlight-Driven Photocatalytic Filter

Sunlight-driven photocatalytic filters against pathogenic bioaerosols have attracted a lot of interest. However, developing an efficient interception system that shows enhanced visible-light harvesting, controllable charge dynamic, and boosted ROS generation remains a grand challenge. Here, we designed an ionic ZIF-8@iCOF nanocomposite as a sunlight-driven photocatalytic filter through elaborate structural engineering of the heterointerface between ZIF-8 and cationic iCOF layers. The photoactive experiments reveal significant improvements in the visible light absorption and sunlight-driven exciton-enhanced intersystem crossing to boost the generation of singlet oxygen (220%) and also obtain antibacterial efficiency of 99.99999% after 15 min irradiation. After combining with commercial polymer, resultant ZIF-8@iCOF/polyacrylonitrile (PAN) fibrous membranes exhibited high interception efficiency for both PM₁₀ and PM_2.5 (98%), being close to the commercial N95. This fibrous membrane also possesses good biocompatibility and strong elimination of bacteria under sunlight conditions, satisfying for the long-lasting contact usage. This finding not only showcases the promise of the porous materials-based fibrous membranes for efficient photocatalytic filter against pathogenic bioaerosols but also highlights the importance of accurate structural engineering for the advancement of sunlight-driven photocatalytic systems in environment and energy-related fields.

Self-assembled photonic structure: a Ga optical antenna on GaP nanowires

Semiconductor nanowires are the perfect platform for nanophotonic applications owing to their resonant, waveguiding optical properties and technological capabilities providing control over their crystalline and chemical compositions. The vapor-liquid-solid growth mechanism allows the formation of hybrid metal-dielectric nanostructures promoting sub-wavelength light manipulation. In this work, we explore both experimentally and numerically the plasmonic effects promoted by a gallium (Ga) nanoparticle optical antenna decorating the facet of gallium phosphide (GaP) nanowires. Raman, photoluminescence and near-field mapping techniques are used to study the effects. We demonstrate several phenomena including field enhancement, antenna effect and increase in internal reflection. We show that the observed effects have to be considered when nanowires with a plasmonic particle are used in nanophotonic circuits and discuss the ways for utilization of these effects for efficient coupling of light into nanowire waveguide and field tailoring. The results open up promising pathways for the development of both passive and active nanophotonic elements, light harvesting and sensorics.

Flat-optics hybrid MoS2/polymer films for photochemical conversion

Novel light harvesting platforms and strategies are crucial to develop renewable photon to energy conversion technologies that overcome the current global energy and environmental challenges. Two-dimensional (2D) transition metal dichalcogenide (TMD) semiconductor layers are particularly attractive for photoconversion applications but new ultra-compact photon harvesting schemes are urgently required to mitigate their poor photon absorption properties. Here, we propose a flat-optics scheme based on nanogrooved ultra-thin MoS₂ layers conformally grown onto large area (cm² scale) nanopatterned templates. The subwavelength re-shaping of the 2D-TMD layers promotes the excitation of photonic Rayleigh anomaly (RA) modes, uniquely boosting a strong in-plane electromagnetic confinement. By tailoring the illumination conditions, we demonstrate effective tuning of the photonic anomalies over a broadband visible spectrum across the absorption band of relevant polluting dye molecules. Thanks to the strong photonic in-plane confinement, we achieve a resonant enhancement of the photodissociation rate of methylene blue (MB) molecules, well above a factor of 2. These results highlight the potential of flat-optics photon harvesting schemes for boosting photoconversion efficiency in large-scale hybrid 2D-TMD/polymer layers, with a strong impact in various applications ranging from new-generation photonics to waste water remediation and renewable energy storage.

Understanding Charge Dynamics in Dense Electronic Manifolds in Complex Environments

Photoinduced charge transfer (CT) excited states and their relaxation mechanisms can be highly interdependent on the environment effects and the consequent changes in the electronic density. Providing a molecular interpretation of the ultrafast (subpicosecond) interplay between initial photoexcited states in such dense electronic manifolds in condensed phase is crucial for improving and understanding such phenomena. Real-time time-dependent density functional theory is here the method of choice to observe the charge density, explicitly propagated in an ultrafast time domain, along with all time-dependent properties that can be easily extracted from it. A designed protocol of analysis for real-time electronic dynamics to be applied to time evolving electronic density related properties to characterize both in time and in space CT dynamics in complex systems is here introduced and validated, proposing easy to be read cross-correlation maps. As case studies to test such tools, we present the photoinduced charge-transfer electronic dynamics of 5-benzyluracil, a mimic of nucleic acid/protein interactions, and the metal-to-ligand charge-transfer electronic dynamics in water solution of [Ru(dcbpy)2(NCS)2]4-, dcbpy = (4,4'-dicarboxy-2,2'-bipyridine), or "N34-", a dye sensitizer for solar cells. Electrostatic and explicit ab initio treatment of solvent molecules have been compared in the latter case, revealing the importance of the accurate modeling of mutual solute-solvent polarization on CT kinetics. We observed that explicit quantum mechanical treatment of solvent slowed down the charge carriers mobilities with respect to the gas-phase. When all water molecules were modeled instead as simpler embedded point charges, the electronic dynamics appeared enhanced, with a reduced hole-electron distance and higher mean velocities due to the close fixed charges and an artificially increased polarization effect. Such analysis tools and the presented case studies can help to unveil the influence of the electronic manifold, as well as of the finite temperature-induced structural distortions and the environment on the ultrafast charge motions.

Artificial light-harvesting systems based on supramolecular self-assembly multi-component metallogels

This paper proposes a strategy for fabricating new artificial light-harvesting systems (ALHSs) based on supramolecular multi-component metallogels. Al³⁺ was introduced into a solution of an acylhydrazone compound (L) in DMSO or DMF to form the L-Al³⁺ assembly. After adding Al³⁺ to the L solution, a noticeable blue shift appeared in the fluorescence spectra of L. Moreover, L could form a gel (L-B-gel) with 1,3:2,4-dibenzylidene sorbitol (B) in a DMSO-H₂O binary solution. Finally, we obtained a multi-component metallogel (L-Al³⁺-B-gel) and successfully fabricated two ALHSs (L-Al³⁺/rhodamine 6G (Rh6G) and L-Al³⁺/rhodamine B (RhB)). In these systems, the L-Al³⁺ supramolecular assembly acts as the donor, while Rh6G and RhB act as acceptors. Additionally, we confirmed an energy-transfer process from the L-Al³⁺ component to Rh6G and RhB separately. The proposed fabrication strategy will facilitate the development of ALHSs.

BSA-assisted hydrothermal conversion of MoS2 nanosheets into quantum dots with high yield and bright fluorescence for constructing a sensing platform via dual quenching effects

With large surface-responsive and excitation-dependent fluorescence, two-dimensional fluorescent quantum dots (QDs) have been receiving tremendous attention to develop their facile synthetic approaches and/or expand their promising applications. Here, a two-step strategy is demonstrated for high-yield production of MoS₂ QDs from MoS₂ powder through first sonication-driven exfoliation and subsequent hydrothermal splitting with the assistance of bovine serum albumin (BSA). Experimentally, ∼100 nm-sized MoS₂ nanosheets are ultrasonically exfoliated from MoS₂ powder in a BSA solution, and further hydrothermally split into ∼ 8.2 nm-sized QDs (NQDs) at 200 °C. In addition to their excellent stability/dispersibility in aqueous solution, the resultant MoS₂ NQDs also exhibit much brighter blue fluorescence than those synthesized by other methods. The strong fluorescence is significantly quenched by p-nitrophenol for constructing a sensitive sensor with high selectivity, which is attributed to dual quenching effects from inner filter effect (IFE) and fluorescence resonance energy transfer (FRET). Interestingly, with the increment of pH from 5 to 10, the ratio of IFE in fluorescence quenching gradually decreases accompanied by an increment of FRET ratio, resulting in the high sensitivity and responsivity for detecting p-nitrophenol at a wide range of pH. Clearly, the MoS₂ NQD-based sensing approach demonstrates a promising potential for selective detection and fast analysis of pollutants in environment monitoring and security screening.

Extended star graph as a light-harvesting-complex prototype: Excitonic absorption speedup by peripheral energy defect tuning

We study the quantum dynamics of a photoexcitation uniformly distributed at the periphery of an extended star network (with N_{B} branches of length L_{B}). More specifically, we address here the question of the energy absorption at the core of the network and how this process can be improved (or not) by the inclusion of peripheral defects with a tunable energy amplitude Δ. Our numerical simulations reveal the existence of optimal value of energy defect Δ^{*} which depends on the network architecture. Around this value, the absorption process presents a strong speedup (i.e., reduction of the absorption time) provided that L_{B}≤L_{B}^{*} with L_{B}^{*}≈12.5/ln(N_{B}). Analytical and numerical developments are then conducted to interpret this feature. We show that the origin of this speedup takes place in the hybridization of two upper-band excitonic eigenstates. This hybridization is important when L_{B}≤L_{B}^{*} and vanishes almost totally when L_{B}>L_{B}^{*}. These structural rules we draw here could represent a potential guide for the practical design of molecular nanonetwork dedicated to the realization of efficient photoexcitation absorption.

Improving Plant Photosynthesis through Light-Harvesting Upconversion Nanoparticles

Nanotechnology is considered as an emerging effective means to augment plant photosynthesis. However, there is still a lot of work to be done in this field. Here, we applied the upconversion nanoparticles (UCNPs) on lettuce leaves and found that the UCNPs were able to transport into the lettuce body and colocalize with the chloroplasts. It was proved that UCNPs could harvest the near-infrared light of sunlight and increase the electron transfer rate in the photosynthesis process, thus increasing the photosynthesis rate. The gene expression analysis showed that more than 90% of gene expression in photosynthesis was upregulated. After spraying the UCNP solution on the leaves of lettuce and placing the lettuce under sunlight for 1 week, the wet/dry weight of the leaves increased by 53.33% and 45.71%, respectively. This nanoengineering of light-harvesting UCNPs may have great potential for applications in agriculture.

Artificial Light-Harvesting System with White-Light Emission in a Bicontinuous Ionic Medium

Artificial light-harvesting systems (ALHSs), which are closely related to Förster resonance energy transfer (FRET), are among the most attractive scientific topics during the past few decades. Specifically, binary ALHSs that are composed of a fluid donor and acceptor have a simplified composition and high number density of the donor units. However, largely due to the difficulty in obtaining a fluid donor, investigation of these systems is still quite limited, especially for the ionic systems. Herein, we report a new type of binary ALHS using an ionic naphthalimide (NPI) derivative as a donor, which shows greatly improved photoluminescence for its bicontinuous liquid structure. When blending with an acceptor such as rhodamine 6G or trans-4-[4-(dimethylamino)styryl]-methylpyridinium iodide, efficient FRET was confirmed by both experimental results and molecular dynamics simulations, with an energy transfer efficiency up to ∼90%. Tunable color, including white-light emission, was achieved by tuning the acceptor/donor ratio, opening the door for a variety of applications such as light-emitting diodes and photoluminescent inks.

Static Disorder has Dynamic Impact on Energy Transport in Biomimetic Light-Harvesting Complexes

Despite extensive studies, many questions remain about what structural and energetic factors give rise to the remarkable energy transport efficiency of photosynthetic light-harvesting protein complexes, owing largely to the inability to synthetically control such factors in these natural systems. Herein, we demonstrate energy transfer within a biomimetic light-harvesting complex consisting of identical chromophores attached in a circular array to a protein scaffold derived from the tobacco mosaic virus coat protein. We confirm the capability of energy transport by observing ultrafast depolarization in transient absorption anisotropy measurements and a redshift in time-resolved emission spectra in these complexes. Modeling the system with kinetic Monte Carlo simulations recapitulates the observed anisotropy decays, suggesting an inter-site hopping rate as high as 1.6 ps^–1. With these simulations, we identify static disorder in orientation, site energy, and degree of coupling as key remaining factors to control to achieve long-range energy transfer in these systems. We thereby establish this system as a highly promising, bottom-up model for studying long-range energy transfer in light-harvesting protein complexes.