Halogen-bonding boosting the high performance X-ray imaging of organic scintillators

Organic scintillators with efficient X-ray excited luminescence are essential for medical diagnostics and security screening. However, achieving excellent organic scintillation materials is challenging due to low X-ray absorption coefficients and inferior radioluminescence (RL) intensity. Herein, supramolecular interactions are incorporated, particularly halogen bonding, into organic scintillators to enhance their radioluminescence properties. By introducing heavy atoms (X = Cl, Br, I) into 9,10-bis(4-pyridyl)anthracene (BPA), the formation of halogen bonding (BPA-X) enhances their X-ray absorption coefficient and restricts the molecular vibration and rotation, which boosts their RL intensity. The RL intensity of BPA-Cl and BPA-Br fluorochromes increased by over 2 and 6.3 times compared to BPA, respectively. Especially, BPA-Br exhibits an ultrafast decay time of 8.25 ns and low detection limits of 25.95 ± 2.49 nGy s-1. The flexible film constructed with BPA-Br exhibited excellent X-ray imaging capabilities. Furthermore, this approach is also applicable to organic phosphors. The formation of halogen bonding in bromophenyl-methylpyridinium iodide (PYI) led to a fourfold increase in RL intensity compared to bromophenyl-methyl-pyridinium (PY). It suggests that halogen bonding serves as a promising and effective molecular design strategy for the development of high-performance organic scintillator materials, presenting new opportunities for their applications in radiology and security screening.

Amplified and Specific Staining of Protein Dimerization on Cell Membrane Catalyzed by Responsively Installed DNA Nanomachines for Cancer Diagnosis

In situ staining of protein dimerization on cell membrane has an important significance in accurate diagnosis during perioperative period, yet facile integration of specific recognition function and local signal conversion/amplification abilities on membrane surface remains a great challenge. Herein, a two-stage catalytic strategy is developed by installing DNA nanomachines and employing. Specifically, dual-aptamer-assisted DNA scaffold perform a "bispecific recognition-then-computing" operation and the output signal initiate a membrane-anchored biocatalysis for self-assembly of DNA catalytic converters, that is, G-quadruplex nanowire/hemin DNAzyme. Then, localized-deposition of chromogenic polydopamine is chemically catalyzed by horseradish peroxidase-mimicking DNAzyme and guided by supramolecular interactions between conjugate rigid plane of G-tetrad and polydopamine oligomer. The catalytic products exhibit nanofiber morphology with a diameter of 80-120 nm and a length of 1-10 µm, and one-to-one localize on DNA scaffold for amplified and specific staining of protein dimers. The bispecific staining leads to a higher (≈3.4-fold) signal intensity than traditional immunohistochemistry, which is beneficial for direct visualization. Moreover, an efficient discrimination ability of the bispecific staining strategy is observed in co-culture model staining. This study provides a novel catalytic method for controlling deposition of chromogens and paves a new avenue to sensitively stain of protein-protein interactions in disease diagnosis.

What is isostructurality? Questions on the definition

Investigation of isostructurality leads to a deeper understanding of close-packing principles and contributes to the ability of crystal engineering. A given packing motif may tolerate small molecular changes within a limit. Slight alterations of a crystal packing arrangement are carried out in order to fine-tune the structural and macroscopic properties, keeping the balance of the spatial requirements and electrostatic effects of the altered molecules in the crystals, preserving their isostructurality. Even so, the definition of isostructurality is not explicit about several issues. Are the corresponding structures required to have the same stoichiometry, Z', symmetry elements and the same space group? Because it is not obvious in the definition, studies on structure analysis and software calculating various numerical descriptors developed for the quantitative comparison of the degree of similarity of isostructural crystals self-define their criteria. The extent of the difference between corresponding crystal structures referred to as isostructural is not limited. Should it be determined numerically? There is nothing in the definition about a demand for similar supramolecular arrangements in isostructural crystals. Should the similarity of supramolecular interactions be a criterion of isostructurality? The definition of isostructurality deserves reconsideration regarding symmetry, measure of similarity and formation of supramolecular interactions.

Fluorescence Enhancement of Adamantane-Modified Dyes in Aqueous Solution via Supramolecular Interaction with Methyl-β-cyclodextrin and Their Application in Cell Imaging

The fluorescence of functional dyes was generally quenched in aqueous solution, which hindered their application in water-bearing detections. In this work, a novel strategy based on host-guest interaction was provided for the purpose of fluorescence enhancement in aqueous solution and cell imaging. Three adamantane-modified fluorescent dyes (Coum-Ad, NP-Ad, NR-Ad) with coumarin, 1,8-naphthalimide and Nile Red as fluorophores were initially designed and prepared. The ((adamantan-1-yl)methyl)amino group, as the auxochrome of those dyes, complexed with methylated β-cyclodextrin (M-β-CD) via supramolecular interaction, and then fluorescent supramolecular nanoparticles (FSNPs) were formed by self-assembly in water. The inclusion equilibrium constant (K) could be as high as 3.94×104  M-1 . With the addition of M-β-CD, fluorescence quantum yields of these dyes were separately improved to 69.8 %, 32.9 % and 41.3 %. Inspired by the above satisfactory results, six adamantane-modified probes organelle-NPAds with organelle-targeting capability were further obtained. As the formation of hydrogen bonds between organelle-NPAd2 and M-β-CD verified by theoretical calculation, K of organelle-NPAd2 (5.13×104  M-1 ~4.53×105  M-1 ) with M-β-CD was higher than that of organelle-NPAd1 (1.15×104  M-1 ~3.66×104  M-1 ) and their fluorescence quantum yields increased to 32.8 %~83.6 % in aqueous solution. In addition, fluorescence enhancement was realized in cell imaging with the addition of M-β-CD.

"Reaction"-Like Shaping of Self-Delivery Supramolecular Nanodrugs in the Nanoprecipitation Process

Nanoprecipitation, which is achieved through the diffusion and precipitation of drug molecules in blended solvent and antisolvent phases, is a classic route for constructing nanodrugs (NDs) and previously directed by diffusion-controlled theory. However, the diffusion-controlled mechanism is out of date in the recent preparation of self-delivery supramolecular NDs (SDSNDs), characterized by the construction of drug nanoparticles through supramolecular interactions in the absence of carriers and surfactants. Herein, a "reaction"-like complement, contributed from supramolecular interactions, is proposed for the preparation of naphthoquinone SDSNDs. Different from the diffusion-controlled process, the formation rate of SDSNDs via the "reaction"-like process is almost constant and highly dependent on the supramolecular interaction-determined Gibbs free energy of molecular binding. Thus, the formation rate and drug availability of SDSNDs are greatly improved by engineering the supramolecular interactions, which facilitates the preparation of SDSNDs with expected sizes, components, and therapeutic functions. As a deep understanding of supramolecular-interaction-involved nanoprecipitation, the current "reaction"-like protocol not only provides a theoretical supplement for classic nanoprecipitation but also highlights the potential of nanoprecipitation in shaping self-assembled, coassembled, and metal-ion-associated SDSNDs.

Fluorescence labeling of anchor-modified Mart-1 peptide for increasing its affinity for HLA-A*0201: Hit two targets with one arrow

One of the most successful strategies in designing peptide-based cancer vaccines is modifying natural epitope peptides to increase their binding strength to human leukocyte antigens (HLAs). Anchor-modified Mart-1 peptide (ELAGIGILTV) is among the artificial epitope peptides with the highest binding affinity for HLA-A*0201. In this study, by fluorescence labeling of its either C- or N-terminus with Nε -(5-carboxyfluorescein)-l-lysine, we not only made it traceable but also drastically increased its binding strength to HLA-A*0201. HLA streptamer, for the first time, is introduced for measuring the binding constants (Ka ) of the labeled peptides. The affinity of the labeled peptides for the HLA-A*201 of the MCF-7 cells was extraordinarily high and co-incubating them with the highest possible amount of the unlabeled peptide, as a competitor, did not significantly prohibit them from binding to the HLA. The reproducibility of the obtained results was confirmed by using the T2 cell line. The HLA-deficient K562 cell line was used as the negative control. With in silico simulations, we found two hydrophobic pockets on both sides of HLA-A*0201 for anchoring the C- or N-terminal 5-carboxyfluorescein probe, which can explain the extraordinary affinity of the labeled peptides for the HLA-A*0201.

Immobilizing surface halide in perovskite solar cells via calix[4]pyrrole

The halide diffusion across the charge-transporting layer followed by reaction with metal electrode represents a critical factor limiting the long-term stability of perovskite solar cells (PSCs). In this work, we report a supramolecular strategy with surface anion complexation for enhancing the light and thermal stability of perovskite films as well as devices. The calix[4]pyrrole (C[4]P) is demonstrated as a unique anion-binding agent for stabilizing the structure of perovskite by anchoring surface halides, which increases the activation energy for halide migration, thus effectively suppressing the halide-metal electrode reactions. The C[4]P stabilized perovskite films preserve their initial morphology after ageing at 85 °C or under 1 sun illumination in humid air over 50 hours, significantly outperforming the control samples. This strategy radically tackles the halide outward-diffusion issue without sacrificing charge extraction. Inverted-structured PSCs based on C[4]P modified formamidinium-cesium perovskite exhibit a champion power conversion efficiency of over 23%. The lifespans of unsealed PSCs are unprecedentedly prolonged from dozens of hours to over 2000 hours under operation (ISOS-L-1) and 85 °C ageing (ISOS-D-2). When subjected to a harsher protocol of ISOS-L-2 with both light and thermal stresses, the C[4]P based PSCs maintain 87% of original efficiency after ageing for 500 hours. This article is protected by copyright. All rights reserved.

"Noncovalent Interaction": A Chemical Misnomer That Inhibits Proper Understanding of Hydrogen Bonding, Rotation Barriers, and Other Topics

We discuss the problematic terminology of "noncovalent interactions" as commonly applied to hydrogen bonds, rotation barriers, steric repulsions, and other stereoelectronic phenomena. Although categorization as "noncovalent" seems to justify classical-type pedagogical rationalizations, we show that these phenomena are irreducible corollaries of the same orbital-level conceptions of electronic covalency and resonance that govern all chemical bonding phenomena. Retention of such nomenclature is pedagogically misleading in supporting superficial dipole-dipole and related "simple, neat, and wrong" conceptions as well as perpetuating inappropriate bifurcation of the introductory chemistry curriculum into distinct "covalent" vs. "noncovalent" modules. If retained at all, the line of dichotomization between "covalent" and "noncovalent" interaction should be re-drawn beyond the range of quantal exchange effects (roughly, at the contact boundary of empirical van der Waals radii) to better unify the pedagogy of molecular and supramolecular bonding phenomena.

Organic-Cation Modulated Assembly Behaviors of a Ureidopyrimidone-Grafting Cluster

Ureidopyrimidone (UPy) is an important building block for constructing functional supramolecular polymers and soft materials based on their characteristic quadruple hydrogen bonds. While the evidence from the single-crystal X-ray diffraction data for the existence of linear hydrogen bonding has still been absent up to now. To obtain the crystals of UPy-containing molecules with high quality, enhanced rigidity and crystallinity are expected. Herein, an inorganic Anderson-Evans type cluster [Mn(OH₎₆Mo₆O₁₈]^3-, which can provide suitable stiffness and charge, is used as a linker to covalently anchor two UPy units. The prepared organic-inorganic polyanion with three negative charges has a linear architecture, which is prone to form an infinite one-dimensional structure based on the supramolecular forces. The results indicate that the combination models of UPy units can be conveniently modulated by organic counter cations with different sizes, and therefore three unreported models are observed under various conditions. The present study gives a unique understanding of the intermolecular interactions in UPy-based supramolecular polymers and also provides a simple tuning method, which benefits the construction of functional materials and the adjustment of their properties.

Hierarchically Organized Cocrystal of Tetra-Anionic Porphyrin and Di-Cationic Viologen: Ion Conformations, Supramolecule Interactions, and Porphyrin Arrays

Ionic co-assembly of tetra-anionic porphyrins has been extensively researched in the construction of hierarchically organized architectures with potential application value in organic semiconductors, sunlight catalysts and supramolecular chirality systems. However, such architectures are difficult to grow to a size suitable for single-crystal X-ray diffraction (SCXRD); the lack of single-crystal structures of these architectures leads to challenges in gaining deeper comprehension about that. This study reports a hierarchically organized cocrystal of meso-tetra(4-sulfonato-phenyl)-porphyrin (TSPP^4- ) and N, N'-diethyl-viologen (DEV²⁺ ), wherein wave-like and saddle-like TSPP^4- ions co-aggregate at a stoichiometric ratio of 1 : 2 to form unique porphyrin arrays; the spectrum characteristics and calculated coulombic exciton coupling energy show that these porphyrin arrays are J-aggregates. We prove that the distortion of porphyrin ring of TSPP^4- strongly correlates with the deflection of its phenyl groups. The crystal comprises six different ionic conformations, and the multiplicity of ionic conformation leads to intricate supramolecular interactions.

Drug Self-Delivery Systems: Molecule Design, Construction Strategy, and Biological Application

Drug self-delivery systems (DSDSs) offer new ways to create novel drug delivery systems (DDSs). In typical DSDSs, therapeutic reagents are not considered passive cargos but active delivery agents of actionable targets. As an advanced drug delivery strategy, DSDSs with positive cooperativity of both free drugs and nanocarriers exhibit the clear merits of unprecedented drug-loading capacity, minimized systemic toxicity, and flexible preparation of nanoscale deliverables for passive targeted therapy. This review highlights the recent advances and future trends in DSDSs on the basis of two differently constructed structures: covalent and noncovalent bond-based DSDSs. Specifically, various chemical and architectural designs, fabrication strategies, and responsive and functional features are comprehensively discussed for these two types of DSDSs. In addition, additional comments on the current development status of DSDSs and the potential applications of their molecular designs are presented in the corresponding discussion. Finally, the promising potential of DSDSs in biological applications is revealed and the relationship between preliminary molecular design of DSDSs and therapeutic effects of subsequent DSDSs biological applications is clarified.

A polymeric co-assembly of subunit vaccine with polyoxometalates induces enhanced immune responses

Long-lasting protective immune responses are expected following vaccination. However, most vaccines alone are inability to evoke an efficient protection. The combinatory administration of adjuvants with vaccines is critical for generating the enhanced immune responses. Herein, with biocompatible poly(4-vinylpyridine) (P4VP) as template, 2.5 nm iron/molybdenum oxide cluster, {Mo₇₂Fe₃₀}, is applied as an adjuvant to co-assemble with antigens of Mycobacterium bovis via hydrogen bonding at molecular scale. Molecular scale integration of the antigens and {Mo₇₂Fe₃₀} and their full exposure to body fluid media contribute to the augmentation of both humoral and cellular immune responses of the vaccines after inoculation in mice. Anti-inflammatory factor IL-10 gradually increases after 2 weeks followed by a final back to normal level by the 5th week. The balance between proinflammatory cytokines and anti-inflammatory factors suggests that immune system can be activated in the early stage of infection by the antigens carried by the supra-particles and secrete acute inflammatory factors for host defense and antiinflammatory factors for immune protection.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (further structural analysis and biological analsyis) is available in the online version of this article at 10.1007/s12274-021-4004-9.

Simple Strategy Preparing Cyclodextrin Carboxylate as a Highly Effective Carrier for Bioactive Compounds

Many phytochemicals suffer from poor water dispersity and storage stability, which restrict their application within aqueous-based commercial products. β-Cyclodextrin (β-CD) is a water-dispersible molecule with a hydrophobic core that can encapsulate and protect non-polar substances. The functional attributes of β-CD can be further enhanced by chemical modification. In this study, a simple and effective dry-heating process was applied to fabricate succinic acid (SA)-modified β-CD (SACD) through esterification. SACD showed better encapsulation property than non-modified β-CD to guest molecules such as methyl orange (up to 1.41-folds of β-CD) and curcumin (with an encapsulation efficiency of up to 10 mg/g). Meanwhile, higher water solubility (up to 469.30 g per 100 g of H₂O) was achieved for SACD, indicating that a high dose of SACD could be applied in an aqueous food matrix. Such a simple strategy exhibiting low cytotoxicity shows great potential incorporating bioactive compounds into functional foods.

Supramolecularly Poly(amidoxime)-Loaded Macroporous Resin for Fast Uranium Recovery from Seawater and Uranium-Containing Wastewater

Uranium is an extremely abundant resource in seawater that could supply nuclear fuel for over the long-term, but it is tremendously difficult to extract. Here, a new supramolecular poly(amidoxime) (PAO)-loaded macroporous resin (PLMR) adsorbent has been explored for highly efficient uranium adsorption. Through simply immersing the macroporous resin in the PAO solution, PAOs can be firmly loaded on the surface of the nanopores mainly by hydrophobic interaction, to achieve the as-prepared PLMR. Unlike existing amidoxime-based adsorbents containing many inner minimally effective PAOs, almost all the PAOs of PLMR have high uranium adsorption efficiency because they can form a PAO-layer on the nanopores with molecular-level thickness and ultrahigh specific surface area. As a result, this PLMR has highly efficient uranium adsorbing performance. The uranium adsorption capacity of the PLMR was 157 mg/g (the U_PAO in the PLMR was 1039 mg/g), in 32 ppm uranium-spiked seawater for 120 h. Additionally, uranium in 1.0 L 100 ppb U-spiked both water and seawater can be removed quickly and the recovery efficiency can reach 91.1 ± 1.7% and 86.5 ± 1.9%, respectively, after being filtered by a column filled with 200 mg PLMR at 300 mL/min for 24 h. More importantly, after filtering 200 T natural seawater with 200 g PLMR for only 10 days, the uranium-uptake amount of the PLMR reached 2.14 ± 0.21 mg/g, and its average uranium adsorption speed reached 0.214 mg/(g·day) which is very fast among reported amidoxime-based adsorbents. This new adsorbent has great potential to quickly and massively recover uranium from seawater and uranium-containing wastewater. Most importantly, this work will provide a simple but general strategy to greatly enhance the uranium adsorption efficiency of amidoxime-functionalized adsorbents with ultrahigh specific surface area via supramolecular interaction, and even inspire the exploration of other adsorbents.

Functionalization of Polyethyleneimine with Hollow Cyclotriveratrylene and Its Subsequent Supramolecular Interaction with Doxorubicin

In this paper, a modified Cyclotriveratrylene was synthesized and linked to a branched Polyethylenimine, and this unique polymeric material was subsequently examined as a potential supramolecular carrier for Doxorubicin. Spectroscopic analysis in different solvents had shown that Doxorubicin was coordinated within the hollow-shaped unit of the armed Cyclotriveratrylene, and the nature of the host-guest complex revealed intrinsic Van der Waals interactions and hydrogen bonding between the host and guest. The strongest interaction was detected in water because of the hydrophobic effect shared between the aromatic groups of the Doxorubicin and Cyclotriveratrylene unit. Density functional theory calculations had also confirmed that in the most stable coordination of Doxorubicin with the cross-linked polymer, the aromatic rings of the Doxorubicin were localized toward the Cyclotriveratrylene core, while its aliphatic chains aligned closer with amino groups, thus forming a compact supramolecular assembly that may confer a shielding effect on Doxorubicin. These observations had emphasized the importance of supramolecular considerations when designing a novel drug delivery platform.

Polyphenol-Based Nanoparticles for Intracellular Protein Delivery via Competing Supramolecular Interactions

Intracellular delivery of proteins is a promising strategy for regulating cellular behavior and therefore has attracted interest for biomedical applications. Despite the emergence of various nanoparticle-based intracellular delivery approaches, it remains challenging to engineer a versatile delivery system capable of responding to various physiological triggers without the need for complex chemical synthesis of the delivery system. Herein, we develop a template-mediated supramolecular assembly strategy to synthesize protein-polyphenol nanoparticles (NPs) capable of endosomal escape and subsequent protein release in the cytosol. These NPs are stable in serum and undergo surface charge reversal from negative to positive in acidic environments, leading to spontaneous endosomal escape. In the cytosol, endogenous small peptides and amino acids with relatively high charge densities, such as glutathione, trigger NP disassembly through competitive supramolecular interactions, thereby releasing functional bioactive proteins, as validated using cytochrome C and β-galactosidase. The versatility of the present strategy in terms of nanoparticle size, protein type, and functional protein delivery makes this a promising platform for potential application in the field of protein therapeutics.

Sensitive and Stable 2D Perovskite Single-Crystal X-ray Detectors Enabled by a Supramolecular Anchor

Perovskite X-ray detectors have been demonstrated to be sensitive to soft X-rays (<80 keV) for potential medical imaging applications. However, developing X-ray detectors that are stable and sensitive to hard X-rays (80 to 120 keV) for practical medical imaging is highly desired. Here, a sensitive 2D fluorophenethylammonium lead iodide ((F-PEA)₂ PbI₄ ) perovskite single-crystal hard-X-ray detector from low-cost solution processes is reported. Dipole interaction of organic ions promotes the ordering of benzene rings as well as the supramolecular electrostatic interaction between electron-deficient F atoms with neighbor benzene rings. Supramolecular interactions serve as a supramolecular anchor to stabilize and tune the electronic properties of single crystals. The 2D (F-PEA)₂ PbI₄ perovskite single crystal exhibits an intrinsic property with record bulk resistivity of 1.36 × 10¹² Ω cm, which brings a low device noise for hard X-ray detection. Meanwhile, the ion-migration phenomenon is effectively suppressed, even under the large applied bias of 200 V, by blocking the ion migration paths after anchoring. Consequently, the (F-PEA)₂ PbI₄ single crystal detector yields a sensitivity of 3402 μC Gy^-1 air cm^-2 to 120 keV_p hard X-rays with lowest detectable X-ray dose rate of 23 nGy_air s^-1 , outperforming the dominating CsI scintillator of commercial digital radiography systems by acquiring clear X-ray images under much lower dose rate. In addition, the detector shows high operation stability under extremely high-flux X-ray irradiation.

Supramolecular Chiral Discrimination of D-Phenylalanine Amino Acid Based on a Perylene Bisimide Derivative

The interaction between homochiral substituted perylene bisimide (PBI) molecule and the D enantiomer of phenylalanine amino acid was monitored. Spectroscopic transitions of PBI derivative in aqueous solution in the visible range were used to evaluate the presence of D-phenylalanine. UV-visible, fluorescence, FT-IR, and AFM characterizations showed that D-phenylalanine induces significant variations in the chiral perylene derivative aggregation state and the mechanism is enantioselective as a consequence of the 3D analyte structure. The interaction mechanism was further investigated in presence of interfering amino acid (D-serine and D-histidine) confirming that both chemical structure and its 3D structure play a crucial role for the amino acid discrimination. A D-phenylalanine fluorescence sensor based on perylene was proposed. A limit of detection (LOD) of 64.2 ± 0.38 nM was calculated in the range 10-7-10-5 M and of 1.53 ± 0.89 μM was obtained in the range 10-5 and 10-3 M.

Supramolecular Fabrication of Complex 3D Hollow Polymeric Hydrogels with Shape and Function Diversity

Inspired by the high importance of hollow structures in nature such as blood vessels and bamboos in matter transportation, properties enhancement, or even survival of living creatures, the creation of hollow materials remains of considerable interest. However, constructing hollow unique living-like soft and wet polymeric hydrogels with desirable structures and functionalities is still a big challenge. Here, we reported a robust and effective strategy to fabricate complex three-dimensional (3D) hollow polymeric hydrogel with designed shape and function diversity on the basis of supramolecular interactions. By placing a Ca²⁺ included gelatin core into the solution of alginate, hydrogel shell could be formed along with the shape of the gelatin core via coordination between alginate chains and Ca²⁺ diffused from gelatin. The hollow hydrogel could finally be obtained by dissolving the gelatin core. Various complex 3D hollow structures could be achieved by designing/constructing assembled gelatin core as a building block with adjustable supramolecular metal coordination position and strength. Moreover, hollow hydrogels with function diversity could be developed by introducing functional polymers or nanoparticles into the hydrogel wall. This work has made important progress in developing hollow polymeric hydrogel with desirable structures, shapes, and various functional applications including soft actuators and chemical reaction containers.

Crystal structures and Hirshfeld surface analysis of transition-metal complexes of 1,3-azolecarboxylic acids

The crystal structures of five new transition-metal complexes synthesized using thiazole-2-carboxylic acid (2-Htza), imidazole-2-carboxylic acid (2-H₂ima) or 1,3-oxazole-4-carboxylic acid (4-Hoxa), namely diaquabis(thiazole-2-carboxylato-κ²N,O)cobalt(II), [Co(C₄H₂NO₂S)₂(H₂O)₂], 1, diaquabis(thiazole-2-carboxylato-κ²N,O)nickel(II), [Ni(C₄H₂NO₂S)₂(H₂O)₂], 2, diaquabis(thiazole-2-carboxylato-κ²N,O)cadmium(II), [Cd(C₄H₂NO₂S)₂(H₂O)₂], 3, diaquabis(1H-imidazole-2-carboxylato-κ²N³,O)cobalt(II), [Co(C₄H₂N₂O₂)₂(H₂O)₂], 4, and diaquabis(1,3-oxazole-4-carboxylato-κ²N,O⁴)cobalt(II), [Co(C₄H₂NO₃)₂(H₂O)₂], 5, are reported. The influence of the nature of the heteroatom and the position of the carboxyl group in relation to the heteroatom on the self-assembly process are discussed based upon Hirshfeld surface analysis and used to explain the observed differences in the single-crystal structures and the supramolecular frameworks and topologies of complexes 1-5.

Fluoro-Modulated Molecular Geometry in Diketopyrrolopyrrole-Based Low-Bandgap Copolymers for Tuning the Photovoltaic Performance

Fluorination of conjugated polymers is an effective strategy to tune the energy levels for obtaining high power conversion efficiency (PCE) in organic solar cells. In this work, we have developed fluoro-modulated molecular geometries in diketopyrrolopyrrole based low-bandgap copolymers. In these polymers, planar conformation can be locked by intramolecular non-covalent interaction (intramolecular supramolecular interaction) between the sulfur atoms and the introduced F atoms (F···S interaction). By varying the fluorinated moieties, such a planarity can be disturbed and the molecular geometry is tuned. As a result, the polymer' properties can be modulated, including the ultraviolet-visible absorption spectrum to become broaden, charge mobility to be enhanced, open-circuit voltage (V _oc) and short-circuited current (J _sc) to be elevated, and thus photovoltaic performance to be improved. The photovoltaic device based on PCFB, one of the fluorinated terpolymers, exhibited a high PCE near 8.5% with simultaneously enhanced V _oc and J _sc relative to the non-fluorinated one (PCB).

Cluster-Based Metal-Organic Frameworks: Modulated Singlet-Triplet Excited States and Temperature-Responsive Phosphorescent Switch

Luminescent metal-organic frameworks (MOFs) have received much attention due to their applications in color displays, sensors, and smart materials. However, how to balance the energy distribution between singlet and triplet excited states for a new generation of persistent luminescent MOFs is still a challenging goal. In this work, we report that the construction of cluster-based MOFs can supply an effective way to modulate the fluorescence and room-temperature phosphorescence (RTP) emission based on adjustable π-π stacking, halogen-bonding interaction, and metal-cluster units. Compared to the pristine ligand (5-bromoisophthalic acid) with obvious spin-orbit coupling, Zn₅ and Zn₃ cluster-based MOFs exhibit tunable photoluminescence (such as fluorescence and RTP wavelength, lifetime, and quantum yield). The ultralong-lived RTP visualization and temperature-dependent luminescence also provide the Zn₅ cluster-based MOF as a new type of anticounterfeiting and temperature-responsive phosphorescent switch material. Therefore, this work highlights the first example of cluster-based MOFs as ultralong-lived persistent luminescent materials for tuning singlet and triplet excited states, which may be extended to other similar systems for developing ultralong RTP and delayed fluorescence materials.

Hydrogen bonding and fluorous weak interactions in the non-isomorphous {4,4'-bis[(2,2,3,3-tetrafluoropropoxy)methyl]-2,2'-bipyridine-κ2N,N'}dibromidopalladium and -platinum complexes

The polyfluorinated title compounds, [MBr₂(C₁₈H₁₆F₈N₂O₂)] or [4,4'-(HCF₂CF₂CH₂OCH₂)₂-2,2'-bpy]MBr₂, (1) (M = Pd and bpy is bipyridine) and (2) (M = Pt), have -CH_(α)2OCH_(β)2CF₂CF₂H side chains with methylene H-atom donors at the α and β sites, and methine H-atom donors at the terminal sites, in addition to aromatic H-atom donors. In contrast to the original expectation of isomorphous structures, (1) crystallizes in the space group C2/c and (2) in P2₁/n, with similar unit-cell volumes and Z = 4. The asymmetric unit of (1) is one half of the molecule, which resides on a crystallographic twofold axis. Both (1) and (2) display stacking of the molecules, indicating a planar (bpy)MBr₂ skeleton in each case. The structure of (1) exhibits columns with C-H_(β)...Br hydrogen bonds between consecutive layers which conforms to a static (β,β) linkage between layers. In the molecular plane, (1) shows double C-H_(α)...Br hydrogen bonds self-repeating along the b axis, the planar molecules being connected into infinite belts. Compound (2) has no crystallographic symmetry and forms π-dimer pairs as supermolecules, which then stack parallel to the a axis. The π-dimer-pair supermolecules exhibit (Pt-)Br...Br(-Pt) contacts [3.6937 (7) Å] to neighbouring π-dimer pairs crosslinking the columns. The structure of (2) reveals many C-H...F(-C) interactions between F atoms and aromatic C-H groups, in addition to those between F atoms and methylene C-H groups.

Supramolecular Cross-Link-Regulated Emission and Related Applications in Polymer Carbon Dots

Involvement of clear photoluminescence (PL) mechanism in specific chemical structure is at the forefront of carbon dots (CDs). Supramolecular interaction exists in plenty of materials, offering an inherent way to administrate the optical and photophysical properties, especially in terms of newly developed polymer carbon dots (PCDs). However, supramolecular-interaction-derived PL regulation is always ignored in the shadow of many kinds of PL factors, and we still have a limited understanding on the distinct chemical structure and mechanism of supramolecular effect in PCDs. Herein, several distinct photoluminescent phenomena of PCDs under aqueous and solid state are reviewed in terms of supramolecular cross-linking, with highly emphasizing the importance of supramolecular cross-link-enhanced emission (SCEE) effects, and the regulated function of supramolecular interaction's intensity and types between PCDs for special PL behaviors of PCDs. In addition, we categorize the photoluminescent phenomena in PCDs into the following aspects: supramolecular cross-link-enhanced dilute-solution-state emission, concentration-controlled multicolor emission, supramolecular regulation for quenching-resistant solid-state fluorescence, as well as supramolecular cross-link-assisted room-temperature- phosphorescence (RTP) under solid states. Furthermore, the applications of PCDs in light-emitting diodes (LED), solar cells, and anticounterfeiting and data encryption, etc., are presented, based on the distinct supramolecular cross-link-regulated photoluminescent phenomena, especially the solid-state emission. Finally, a brief outlook is given, highlighting the currently existing problems and development direction of supramolecular cross-link-regulated emission in PCDs.

Highly Proton Conducting Polyelectrolyte Membranes with Unusual Water Swelling Behavior Based on Triptycene-containing Poly(arylene ether sulfone) Multiblock Copolymers

Multiblock poly(arylene ether sulfone) copolymers are attractive for polyelectrolyte membrane fuel cell applications due to their reportedly improved proton conductivity under partially hydrated conditions and better mechanical/thermal stability compared to Nafion. However, the long hydrophilic sequences required to achieve high conductivity usually lead to excessive water uptake and swelling, which degrade membrane dimensional stability. Herein, we report a fundamentally new approach to address this grand challenge by introducing shape-persistent triptycene units into the hydrophobic sequences of multiblock copolymers, which induce strong supramolecular chain-threading and interlocking interactions that effectively suppress water swelling. Consequently, unlike previously reported multiblock copolymer systems, the water swelling of the triptycene-containing multiblock copolymers did not increase proportionally with water uptake. This combination of high water uptake and low swelling behavior of these copolymers resulted in excellent proton conductivity and membrane dimensional stability under fully hydrated conditions. In particular, the triptycene-containing multiblock copolymer film with the longest hydrophilic block length (i.e., BPSH100-TRP0-15k-15k) had a water uptake of 105%, an excellent proton conductivity of 0.150 S/cm, and a volume swelling ratio of just 29% (more than 42% reduction compared to Nafion 212).

Side-chain conformations in the isomorphous polyfluorinated {4,4'-bis[(2,2-difluoroethoxy)methyl]-2,2'-bipyridine-κ2N,N'}dichloridopalladium and -platinum complexes

The polyfluorinated title compounds, [MCl₂(C₁₆H₁₆F₄N₂O₂)] or [4,4'-(HCF₂CH₂OCH₂)₂-2,2'-bpy]MCl₂ [M = Pd, (1), and M = Pt, (2)], have -C(H_α)₂OC(H_β)₂CF₂H side chains with H-atom donors at the α and β sites. The structures of (1) and (2) are isomorphous, with the nearly planar (bpy)MCl₂ molecules stacked in columns. Within one column, π-dimer pairs alternate between a π-dimer pair reinforced with C-H...Cl hydrogen bonds (α,α) and a π-dimer pair reinforced with C-H_β...F(-C) interactions (abbreviated as C-H_β...F-C,C-H_β...F-C). The compounds [4,4'-(CF₃CH₂OCH₂)₂-2,2'-bpy]MCl₂ [M = Pd, (3), and M = Pt, (4)] have been reported to be isomorphous [Lu et al. (2012). J. Fluorine Chem. 137, 54-56], yet with disorder in the fluorous regions. The molecules of (3) [or (4)] also form similar stacks, but with alternating π-dimer pairs between the (α,β; α,β) and (β,β) forms. Through (C-)H...Cl hydrogen-bond interactions, one molecule of (1) [or (2)] is expanded into an aggregate of two inversion-related π-dimer pairs, one pair in the (α,α) form and the other pair in the (C-H_β...F-C,C-H_β...F-C) form, with the plane normals making an interplanar angle of 58.24 (3)°. Due to the demands of maintaining a high coordination number around the metal-bound Cl atoms in molecule (1) [or (2)], the ponytails of molecule (1) [or (2)] bend outward; in contrast, the ponytails of molecule (3) [or (4)] bend inward.

Molecular structures of 3-[(2,2,3,3-tetrafluoropropoxy)methyl]- and 3-[(2,2,3,3,3-pentafluoropropoxy)methyl]pyridinium saccharinates

The salts 3-[(2,2,3,3-tetrafluoropropoxy)methyl]pyridinium saccharinate, C₉H₁₀F₄NO⁺·C₇H₄NO₃S^-, (1), and 3-[(2,2,3,3,3-pentafluoropropoxy)methyl]pyridinium saccharinate, C₉H₉F₅NO⁺·C₇H₄NO₃S^-, (2), i.e. saccharinate (or 1,1-dioxo-1λ⁶,2-benzothiazol-3-olate) salts of pyridinium with -CH₂OCH₂CF₂CF₂H and -CH₂OCH₂CF₂CF₃ meta substituents, respectively, were investigated crystallographically in order to compare their fluorine-related weak interactions in the solid state. Both salts demonstrate a stable synthon formed by the pyridinium cation and the saccharinate anion, in which a seven-membered ring reveals a double hydrogen-bonding pattern. The twist between the pyridinium plane and the saccharinate plane in (2) is 21.26 (8)° and that in (1) is 8.03 (6)°. Both salts also show stacks of alternating cation-anion π-interactions. The layer distances, calculated from the centroid of the saccharinate plane to the neighbouring pyridinium planes, above and below, are 3.406 (2) and 3.517 (2) Å in (1), and 3.409 (3) and 3.458 (3) Å in (2).

Weak hydrogen bonding and fluorous interactions in the chloride and bromide salts of 4-[(2,2,3,3-tetrafluoropropoxy)methyl]pyridinium

Neutralization of 4-[(2,2,3,3-tetrafluoropropoxy)methyl]pyridine with hydrohalo acids HX (X = Cl and Br) yielded the pyridinium salts 4-[(2,2,3,3-tetrafluoropropoxy)methyl]pyridinium chloride, C₉H₁₀F₄NO⁺·Cl^-, (1), and 4-[(2,2,3,3-tetrafluoropropoxy)methyl]pyridinium bromide, C₉H₁₀F₄NO⁺·Br^-, (2), both carrying a fluorous side chain at the para position of the pyridinium ring. Single-crystal X-ray diffraction techniques revealed that (1) and (2) are isomorphous. The halide anions accept four hydrogen bonds from N-H, ortho-C-H and CF₂-H groups. Two cations and two anions form a centrosymmetric dimeric building block, utilizing complimentary N-H...X...H-Csp³ connections. These dimers are further crosslinked, utilizing another complimentary Csp²-H...X...H-Csp² connection. The pyridinium rings are π-stacked, forming columns running parallel to the a axis that make angles of ca 44-45° with the normal to the pyridinium plane. There are also supramolecular C-H...F-C interactions, namely bifurcated C-H...F and bifurcated C-F...H interactions; additionally, one type II C-F...F-C halogen bond has been observed.

Dibenzopyran-Based Wide Band Gap Conjugated Copolymers: Structural Design and Application for Polymer Solar Cells

With the efficient synthesis of the crucial dibenzopyran building block, a series of PDBPTBT polymers containing different alkyl side chains and/or fluorine substitution were designed and synthesized via the microwave-assisted Suzuki polycondensation. Quantum chemistry calculations based on density functional theory indicated that different substitutions have significant impacts on the planarity and rigidity of the polymer backbones. Interestingly, the alkyloxy chains of PDBPTBT-4 tend to stay in the same plane with the benzothiadiazole unit, but the others appear to be out of plane. With the S···O and F···H/F···S supramolecular interactions, the conformations of the four polymers will be locked in different ways as predicted by the quantum chemistry calculation. Such structural variation resulted in varied solid stacking and photophysical properties as well as the final photovoltaic performances. Conventional devices based on these four polymers were fabricated, and PDBPTBT-5 displayed the best PCE of 5.32%. After optimization of the additive types, ratios, and the interlayers at the cathode, a high PCE of 7.06% (V_oc = 0.96 V, J_sc = 11.09 mA/cm², and FF = 0.67) is obtained for PDBPTBT-5 with 2.0% DIO as the additive and PFN-OX as the electron-transporting layer. These results indicated DBP-based conjugated polymers are promising wide band gap polymer donors for high-efficiency polymer solar cells.

pH-Regulated Reversible Transition Between Polyion Complexes (PIC) and Hydrogen-Bonding Complexes (HBC) with Tunable Aggregation-Induced Emission

The mimicking of biological supramolecular interactions and their mutual transitions to fabricate intelligent artificial systems has been of increasing interest. Herein, we report the fabrication of supramolecular micellar nanoparticles consisting of quaternized poly(ethylene oxide)-b-poly(2-dimethylaminoethyl methacrylate) (PEO-b-PQDMA) and tetrakis(4-carboxylmethoxyphenyl)ethene (TPE-4COOH), which was capable of reversible transition between polyion complexes (PIC) and hydrogen bonding complexes (HBC) with tunable aggregation-induced emission (AIE) mediated by solution pH. At pH 8, TPE-4COOH chromophores can be directly dissolved in aqueous milieu without evident fluorescence emission. However, upon mixing with PEO-b-PQDMA, polyion complexes were formed by taking advantage of electrostatic interaction between carboxylate anions and quaternary ammonium cations and the most compact PIC micelles were achieved at the isoelectric point (i.e., [QDMA(+)]/[COO(-)] = 1), as confirmed by dynamic light scattering (DLS) measurement. Simultaneously, fluorescence spectroscopy revealed an evident emission turn-on and the maximum fluorescence intensity was observed near the isoelectric point due to the restriction of intramolecular rotation of TPE moieties within the PIC cores. The kinetic study supported a micelle fusion/fission mechanism on the formation of PIC micelles at varying charge ratios, exhibiting a quick time constant (τ1) relating to the formation of quasi-equilibrium micelles and a slow time constant (τ2) corresponding to the formation of final equilibrium micelles. Upon deceasing the pH of PIC micelles from 8 to 2 at the [QDMA(+)]/[COO(-)] molar ratio of 1, TPE-4COOH chromophores became gradually protonated and hydrophobic. The size of micellar nanoparticles underwent a remarkable decrease, whereas the fluorescence intensity exhibited a further increase by approximately 7.35-fold, presumably because of the formation of HBC micelles comprising cationic PQDMA coronas and PEO/TPE-4COOH hydrogen-bonded cores, an inverted micellar structures compared to initial PIC micelles. Moreover, the pH-mediated schizophrenic micellar transition from PIC to HBC with tunable AIE characteristic was reversible.

New frontiers for encapsulation in the chemical industry

Encapsulation of actives comprises an area of exploration undergoing rapid growth in both academic and industrial research settings. Encapsulation processes are employed as a part of product synthesis processes for improved efficiency, enhanced stability, active ingredient compatibility, increased safety, targeted delivery, and novel performance of the end product. Such technical benefits enable producers to offer products with increased formulation complexity, access new markets, differentiate products, and improve compatibility and stability, while meeting consumer demands with improved performance, reduced costs, and new actives. In this review, we highlight several emerging academic areas of encapsulation that we believe have specific relevance to industrial formulation, with a focus on three primary areas: supramolecular encapsulation, aqueous self-assembled systems, and emulsion-based capsules. The goal of this review is to help identify the major challenges facing encapsulation technology adoption in the chemical industry, bringing focus and maximizing the potential value of ongoing research efforts.

Supramolecular Lego assembly towards three-dimensional multi-responsive hydrogels

Inspired by the assembly of Lego toys, hydrogel building blocks with heterogeneous responsiveness are assembled utilizing macroscopic supramolecular recognition as the adhesion force. The Lego hydrogel provides 3D transformation upon pH variation. After disassembly of the building blocks by changing the oxidation state, they can be re-assembled into a completely new shape.

Self-delivery multifunctional anti-HIV hydrogels for sustained release

None of the clinical trials of anti-HIV gels based on conventional polymers or lipid emulsions has been successful, suggesting the need of new molecular design of the anti-HIV gels. This paper reports the conversion of anti-HIV prodrugs into self-delivery supramolecular hydrogels. By covalently conjugating reverse transcriptase inhibitors to a versatile self-assembly motif, the hydrogelators that self-assemble to form supramolecular nanofibers as the matrices of hydrogels in a weak acidic condition are obtained. Upon the treatment of prostate acid phosphatase (PAP), the hydrogels exhibit drastically enhanced elasticity. The hydrogelators are biocompatible and able to release the inhibitors under physiological condition. The use of the self-assembly motif as a self-delivery agent containing non-steroid anti-inflammatory drug (NSAID) renders this hydrogel to be both anti-inflammatory and anti-HIV. This work illustrates an unprecedented approach for designing multifunctional supramolecular hydrogels that may serve as potential anti-HIV hydrogels for sustained drug release.