Hierarchical Porous Amidoximated Metal-Organic Framework for Highly Efficient Uranium Extraction

With the rapid development of industry and technology, high-efficiency extraction of uranium from seawater is a research hotspot from the aspect of nuclear energy development. Herein, a new amidoximated metal-organic framework (UiO-66-DAMN-AO) constructed through a novel organic ligand of 2-diaminomaleonitrile-terephthalic acid (BDC-DAMN) is designed via one-step post-synthetic methods (PSM), which possess the merit of abundant multiaffinity sites, large specific surface area, and unique porous structure for efficient uranium extraction. Adopting one-step PSM can alleviate the destruction of structural stability and the reduction of the conversion rate of amidoxime groups. Meanwhile, introducing the BDC-DAMN ligand with abundant multiaffinity sites endow UiO-66-DAMN-AO with excellent adsorption ability (Qm  = 426.3 mg g-1 ) and selectivity. Interestingly, the UiO-66-DAMN-AO has both micropores and mesopores, which may be attributed to the partial etching of UiO-66-DAMN-AO during the amidoximation. The presence of mesopores improves the mass transfer rate of UiO-66-DAMN-AO and provides more exposed active sites, favoring the adsorption of uranium on UiO-66-DAMN-AO. Thus, this study provides a feasible strategy for modifying metal-organic framework (MOFs) with plentiful amidoxime groups and the promising prospect for MOF-based materials to adsorb uranium from ocean.

Amidoxime Modified UiO-66@PIM-1 Mixed-Matrix Membranes to Enhance CO2 Separation and Anti-Aging Performance

Mixed matrix membranes (MMMs) generally have some fatal defects, such as poor compatibility between the two phases leading to non-selective pores. In this work, PIM-1 was chosen as the polymer matrix, and UiO-66 modified with amidoxime (UiO-66-AO) was used as the filler to prepare the MMMs. In the MMMs, the amino and hydroxyl groups on UO-66-AO form a rich hydrogen bond network with the N and O atoms in the polymer PIM-1 chain to improve the compatibility between the polymer matrix and the filler. In addition, the selective adsorption of CO2 by the amidoxime group can promote the transport of CO2 in the membrane, which enhances the gas selectivity. The CO2 permeability and CO2/N2 selectivity of UiO-66-AO@PIM-1 MMMs are increased by 35.2% and 45.2% compared to pure PIM-1 membranes, reaching 7535.5 Barrer and 26.9, surpassing the Robeson Upper Bound (2008) and close to the 2019 Upper Bound. After 38 days of the aging experiment, the CO2 permeability is approximately 74% of the original. The results show that the addition of UiO-66-AO has an obvious effect on improving the aging properties of the membrane. The UiO-66-AO@PIM-1 MMMs have a bright prospect for CO2 separation in the future.

Design and Fabrication of Hypercrosslinked Covalent Organic Adsorbents for Selective Uranium Extraction

Uranium detection and extraction are necessary for the ecological environment as the growing demand for nuclear energy. Hence, exploring stable materials with excellent performance in uranium extraction and detection is highly desired. Herein, by amidoxime-functionalizing tetrafluoroterephthalonitrile (TFTPN) crosslinked hydroquinone (bP), phloroglucinol (tP), and 4,4',4″-trihydroxytriphenylmethane (tBP), three covalent organic polymers (COPs) bPF-AO, tPF-AO, and tBPF-AO with different crosslinked architectures are fabricated. Uranium extraction and detection related to the difference in molecule construction were systemically investigated, giving some reference for the rational design and fabrication of advanced materials for the removal and monitoring of uranium in the environment. The tPF-AO with a compact steric structure achieves the highest theoretical maximum adsorption capacity of 578.9 ± 15.2 mg g^-1 and the best recyclability. The scattering electron center and U(VI) selective binding sites endow tBPF-AO with excellent capability in selective detection for U(VI), with a limit of detection of 24.2 nmol L^-1, which is well below the standard for U(VI) in drinking water of the World Health Organization (WHO). Moreover, the COPs possess prominent physicochemical stability and recyclability, and more importantly, the PAE-based COPs are derived from inexpensive industry materials with easy processing methods, providing an efficient and economical way for the detection and adsorption of uranium.

Sub-micron microparticles with tunable fluorescence emission obtained via co-self-assembly of amidoximed polymeric ligands and lanthanide ions

Lanthanide coordinating polymeric microparticles have witnessed increasing research interests during the past decades due to their versatile morphology and tunable fluorescent properties. Herein, we have synthesized an amidoximed block copolymer containing aromatic backbone and pendent amidoxime as well as carboxyl groups, which has been employed as the ligand to sensitize the intrinsic fluorescence emission of lanthanide ions of Tb³⁺ and Eu³⁺. Furthermore, the lanthanide coordinating polymeric microparticles showing tunable green and red emission fluorescence have been prepared via the emulsion confinement co-self-assembly of amidoximed polymeric ligands with Tb³⁺ and Eu³⁺. It is found that both the fluorescence emission and sizes of obtained fluorescent microparticles can be easily modulated in a wide range by tuning concentration of polymers and lanthanide ions, as well as emulsion evaporation temperature. Thanks to their tunable sizes (250-900 nm), fluorescence emission as well as presence of surface active functional groups, the present fluorescent microparticles would find potential applications in in-vitro detection, optical encoding and devices.

The Study of Amidoxime-Functionalized Cellulose Separate Th(IV) from Aqueous Solution

Selective extraction of low-concentration thorium (Th(IV)) from wastewater is a very important research topic. In this paper, amidoxime cellulose was synthesized, and its composition and structure were characterized by FT-IR, SEM, XPS, and elemental analysis. The adsorption experiment results showed that the adsorption reaction was a spontaneous exothermic process. When the solid–liquid ratio was 0.12 g/L and the pH value was 3.5, the adsorption percentage of the Th(IV) in water onto amidoxime-functionalized cellulose (AO-CELL) could reach over 80%. The maximum adsorption capacity can reach to 450 mg/g. At the same time, the adsorption selectivity, desorption process and reusability of the material were also studied. The results showed that the AO-CELL had a good selectivity for Th(IV) in the system with Sr²⁺, Cu²⁺, Mg²⁺, Zn²⁺, Pb²⁺, Ni²⁺, and Co²⁺ as co-ions. In the nitric acid concentration of 0.06 mol/L system, the AO-CELL desorption rate of Th(IV) can reach 95%, and the adsorption rate of Th(IV) in aqueous solution of AO-CELL is still above 60% when the AO-CELL is reused four times. The above results show that the amidoxime cellulose adsorption material synthesized by our research group has good selective adsorption performance for Th(IV) of a low concentration in an aqueous solution and has a good practical application value.

Amidoxime Group-Anchored Single Cobalt Atoms for Anti-Biofouling during Uranium Extraction from Seawater

Marine biofouling is one of the most significant challenges hindering practical uranium extraction from seawater. Single atoms have been widely used in catalytic applications because of their remarkable redox property, implying that the single atom is highly capable of catalyzing the generation of reactive oxygen species (ROS) and acts as an anti-biofouling substance for controlling biofouling. In this study, the Co single atom loaded polyacrylamidoxime (PAO) material, PAO-Co, is fabricated based on the binding ability of the amidoxime group to uranyl and cobalt ions. Nitrogen and oxygen atoms from the amidoxime group stabilize the Co single atom. The fabricated PAO-Co exhibits a broad range of antimicrobial activity against diverse marine microorganisms by producing ROS, with an inhibition rate up to 93.4%. The present study is the first to apply the single atom for controlling biofouling. The adsorbent achieves an ultrahigh uranium adsorption capacity of 9.7 mg g^-1 in biofouling-containing natural seawater, which decreased only by 11% compared with that in biofouling-removed natural seawater. These findings indicate that applying single atoms would be a promising strategy for designing biofouling-resistant adsorbents for uranium extraction from seawater.

UiO-66-NH-(AO) MOFs with a New Ligand BDC-NH-(CN) for Efficient Extraction of Uranium from Seawater

Metal-organic frameworks (MOFs) with a high surface area and excellent stability are potential candidates for uranium (U) adsorption. Amidoxime (AO) is the most widely used functional group to extract U, which is usually introduced into MOFs by two-step post-synthetic methods (PSMs). Herein, MOF UiO-66-NH-(AO) was obtained by a one-step PSM with amidoximation from UiO-66-NH-(CN), which was synthesized by a new organic ligand of 2-cyano-terephthalic acid and whose morphology was octahedron and could be well controlled with the new ligand. The one-step PSM can greatly maintain the octahedron of the MOFs. What is more, UiO-66-NH-(AO) showed good adsorption performance for U, the adsorption equilibrium was obtained within 1500 min, and the adsorption capacity of U was calculated to be 134.1 mg/g according to the Langmuir model. It also had excellent selectivity for U in the presence of high concentrations of vanadium (V), ferrum (Fe), magnesium (Mg), calcium (Ca), and zirconium (Zr). The adsorption capacity of U in natural seawater was determined to be 5.2 mg/g within 8 days. The recyclability of UiO-66-NH-(AO) in simulated seawater was demonstrated for at least four adsorption/desorption cycles. The binding mechanism was investigated by the extended X-ray absorption fine structure spectroscopy, revealing that U binding occurs in a fashion η² motif. This study provides a reliable idea for the modification of MOFs and the potential for MOF-based materials to extract U from seawater.

Functionalized Iron-Nitrogen-Carbon Electrocatalyst Provides a Reversible Electron Transfer Platform for Efficient Uranium Extraction from Seawater

Uranium extraction from seawater provides an opportunity for sustainable fuel supply to nuclear power plants. Herein, an adsorption-electrocatalysis strategy is demonstrated for efficient uranium extraction from seawater using a functionalized iron-nitrogen-carbon (Fe-N_x -C-R) catalyst, comprising N-doped carbon capsules supporting FeN_x single-atom sites and surface chelating amidoxime groups (R). The amidoxime groups bring hydrophilicity to the adsorbent and offer surface-specific binding sites for UO₂ ²⁺ capture. The site-isolated FeN_x centres reduce adsorbed UO₂ ²⁺ to UO₂ ⁺ . Subsequently, through electrochemical reduction of the FeN_x sites, unstable U(V) ions are reoxidized to U(VI) in the presence of Na⁺ resulting in the generation of solid Na₂ O(UO₃ ·H₂ O)_x , which can easily be collected. Fe-N_x -C-R reduced the uranium concentration in seawater from ≈3.5 ppb to below 0.5 ppb with a calculated capacity of ≈1.2 mg g^-1 within 24 h. To the best of the knowledge, the developed system is the first to use the adsorption of uranyl ions and electrodeposition of solid Na₂ O(UO₃ .H₂ O)_x for the extraction of uranium from seawater. The important discoveries guide technology development for the efficient extraction of uranium from seawater.

Novel chalcone/aryl carboximidamide hybrids as potent anti-inflammatory via inhibition of prostaglandin E2 and inducible NO synthase activities: design, synthesis, molecular docking studies and ADMET prediction

Two series of chalcone/aryl carboximidamide hybrids 4a-f and 6a-f were synthesised and evaluated for their inhibitory activity against iNOS and PGE2. The most potent derivatives were further checked for their in vivo anti-inflammatory activity utilising carrageenan-induced rat paw oedema model. Compounds 4c, 4d, 6c and 6d were proved to be the most effective inhibitors of PGE2, LPS-induced NO production, iNOS activity. Moreover, 4c, 4d, 6c and 6d showed significant oedema inhibition ranging from 62.21% to 78.51%, compared to indomethacin (56.27 ± 2.14%) and celecoxib (12.32%). Additionally, 4c, 6a and 6e displayed good COX2 inhibitory activity while 4c, 6a and 6c exhibited the highest 5LOX inhibitory activity. Compounds 4c, 4d, 6c and 6d fit nicely into the pocket of iNOS protein (PDB ID: 1r35) via the important amino acid residues. Prediction of physicochemical parameters exhibited that 4c, 4d, 6c and 6d had acceptable physicochemical parameters and drug-likeness. The results indicated that chalcone/aryl carboximidamides 4c, 4d, 6c and 6d, in particular 4d and 6d, could be used as promising lead candidates as potent anti-inflammatory agents.

Amidine- and Amidoxime-Substituted Heterocycles: Synthesis, Antiproliferative Evaluations and DNA Binding

The novel 1,2,3-triazolyl-appended N- and O-heterocycles containing amidine 4–11 and amidoxime 12–22 moiety were prepared and evaluated for their antiproliferative activities in vitro. Among the series of amidine-substituted heterocycles, aromatic diamidine 5 and coumarine amidine 11 had the most potent growth-inhibitory effect on cervical carcinoma (HeLa), hepatocellular carcinoma (HepG2) and colorectal adenocarcinoma (SW620), with IC₅₀ values in the nM range. Although compound 5 was toxic to non-tumor HFF cells, compound 11 showed certain selectivity. From the amidoxime series, quinoline amidoximes 18 and 20 showed antiproliferative effects on lung adenocarcinoma (A549), HeLa and SW620 cells emphasizing compound 20 that exhibited no cytostatic effect on normal HFF fibroblasts. Results of CD titrations and thermal melting experiments indicated that compounds 5 and 10 most likely bind inside the minor groove of AT-DNA and intercalate into AU-RNA. Compounds 6, 9 and 11 bind to AT-DNA with mixed binding mode, most probably minor groove binding accompanied with aggregate binding along the DNA backbone.

High-Capacity Amidoxime-Functionalized β-Cyclodextrin/Graphene Aerogel for Selective Uranium Capture

Uranium extraction from seawater is a grand challenge of mounting severity as the energy demand increases with a growing global population. An amidoxime-functionalized carboxymethyl β-cyclodextrin/graphene aerogel (GDC) is developed for highly efficient and selective uranium extraction via a facile one-pot hydrothermal process. GDC reaches equilibrium in 1 h, and the maximum adsorption capacity calculated from Langmuir model is 654.2 mg/g. Benefiting from the chelation and complexation reaction, the obtained GDC has an excellent selectivity even when the competitive cations, anions, and oil pollutants exist. In addition, the aerogel possesses great mechanical integrity and remains intact after 10 compression cycles. Meanwhile, the GDC can be easily regenerated and maintains a high reusability of 87.3% after 10 adsorption-desorption cycles. It is worthwhile to mention that GDC exhibits an excellent extraction capacity of 19.7 mg/g within 21 days in natural seawater, which is greatly desired in uranium extraction from seawater.

Antibiofouling Ultrathin Poly(amidoxime) Membrane for Enhanced U(VI) Recovery from Wastewater and Seawater

Although eco-friendly amidoxime-based adsorbents own an excellent uranium (U)-adsorption capacity, their U-adsorption efficiency is commonly reduced and even damaged by the biological adhesion from bacteria/microorganisms in an aqueous environment. Herein, we present an antibiofouling ultrathin poly(amidoxime) membrane (AUPM) with highly enhanced U-adsorption performance, through dispersing the quaternized chitosan (Q-CS) and poly(amidoxime) in a cross-linked sulfonated cellulose nanocrystals (S-CNC) network. The cross-linked S-CNC not only can elevate the hydrophilicity to improve the U-adsorption efficiency of AUPM but also can enhance the mechanical strength to form a self-supporting ultrathin membrane (17.21 MPa, 10 μm thickness). More importantly, this AUPM owns a good antibiofouling property, owing to the broad-spectrum antibacterial quaternary ammonium groups of the Q-CS. As a result, within the 1.00 L of low-concentration (100 ppb) U-added pure water (pH ≈ 5) and seawater (pH ≈ 8) for 48 h, 30 mg of AUPM can recover 93.7% U and 91.4% U, respectively. Furthermore, compared with the U-absorption capacity of a blank membrane without the Q-CS, that of AUPM can significantly increase 37.4% reaching from 6.39 to 8.78 mg/g after being in natural seawater for only 25 d. Additionally, this AUPM can still maintain almost constant tensile strength during 10 cycles of adsorption-desorption, which indicates the relatively long-term usability of AUPM. This AUPM will be a promising candidate for highly efficient and large-scale U-recovery from both U-containing waste freshwater/seawater and natural seawater, which will be greatly helpful to deal with the U-pollution and enrich U for the consumption of nuclear power. More importantly, the work will provide a new convenient but universal strategy to fabricate new highly enhanced low-cost U-adsorbents, through the introduction of both an antibacterial property and a high mechanical performance, which will be a good reference for the design of new highly efficient U-adsorbents.

An Efficient Uranium Adsorption Magnetic Platform Based on Amidoxime-Functionalized Flower-like Fe3O4@TiO2 Core-Shell Microspheres

Efficient removal of uranium (U) from aqueous solutions is crucial for ecological safety. Functionalized magnetic nanoparticles provide a promising strategy for radionuclide recovery and separation. However, designing and synthesizing magnetic adsorbents with high sorption capacity and selectivity, accompanied by excellent stability and reusability, remain a challenge. In this work, novel amidoxime-functionalized flower-like magnetic Fe₃O₄@TiO₂ core-shell microspheres are designed and synthesized to efficiently remove U(VI) from aqueous solutions and actual seawater. The magnetic Fe₃O₄ core facilitates easy separation by an external magnetic field, and flower-like TiO₂ nanosheets provide abundant specific surface areas and functionalization sites. The grafted amidoxime (AO) groups could function as a claw for catching uranium. The maximum adsorption capacity on U(VI) of the designed nanospheres reaches 313.6 mg·g^-1 at pH 6.0, and the adsorption efficiency is maintained at 97% after 10 cycles. In addition, the excellent selectivity of the magnetic recyclable AO-functioning Fe₃O₄@TiO₂ microspheres endows the potential of uranium extraction from seawater. The designed material provides an effective and applicable diagram for radioactive element elimination and enrichment.

Supramolecularly Poly(amidoxime)-Loaded Macroporous Resin for Fast Uranium Recovery from Seawater and Uranium-Containing Wastewater

Uranium is an extremely abundant resource in seawater that could supply nuclear fuel for over the long-term, but it is tremendously difficult to extract. Here, a new supramolecular poly(amidoxime) (PAO)-loaded macroporous resin (PLMR) adsorbent has been explored for highly efficient uranium adsorption. Through simply immersing the macroporous resin in the PAO solution, PAOs can be firmly loaded on the surface of the nanopores mainly by hydrophobic interaction, to achieve the as-prepared PLMR. Unlike existing amidoxime-based adsorbents containing many inner minimally effective PAOs, almost all the PAOs of PLMR have high uranium adsorption efficiency because they can form a PAO-layer on the nanopores with molecular-level thickness and ultrahigh specific surface area. As a result, this PLMR has highly efficient uranium adsorbing performance. The uranium adsorption capacity of the PLMR was 157 mg/g (the U_PAO in the PLMR was 1039 mg/g), in 32 ppm uranium-spiked seawater for 120 h. Additionally, uranium in 1.0 L 100 ppb U-spiked both water and seawater can be removed quickly and the recovery efficiency can reach 91.1 ± 1.7% and 86.5 ± 1.9%, respectively, after being filtered by a column filled with 200 mg PLMR at 300 mL/min for 24 h. More importantly, after filtering 200 T natural seawater with 200 g PLMR for only 10 days, the uranium-uptake amount of the PLMR reached 2.14 ± 0.21 mg/g, and its average uranium adsorption speed reached 0.214 mg/(g·day) which is very fast among reported amidoxime-based adsorbents. This new adsorbent has great potential to quickly and massively recover uranium from seawater and uranium-containing wastewater. Most importantly, this work will provide a simple but general strategy to greatly enhance the uranium adsorption efficiency of amidoxime-functionalized adsorbents with ultrahigh specific surface area via supramolecular interaction, and even inspire the exploration of other adsorbents.

Amidoxime-Functionalized Covalent Organic Nanosheets for Sequestration of Uranium In Vivo

Finding efficient actinide decorporation agents is crucial for public health and the development of the nuclear industry. The current inventory of decorporation agents is predominately limited to a handful of ligands. In this work, a two-dimensional (2D) covalent organic nanosheet (CON) material was rationally designed and tested for in vivo uranium decorporation. This material is extensively grafted with amidoxime (AO), a classic uranium-recognition ligand, which not only provides selective binding sites for uranyl but also expands the interlayer spacing of CON, making the active sites more accessible. Significantly, the results of in vivo experiments demonstrate that, in both prophylactic and prompt administration groups, CON-AO exhibits a higher excretion ratio of uranium from kidneys than that of ZnNa₃-diethylenetriamine pentaacetate (DTPA), while presenting a similar level of cytotoxicity. These results suggest that functionalized CONs may emerge as a promising type of actinide in vivo decorporation agent.

A Novel Prodrug of a nNOS Inhibitor with Improved Pharmacokinetic Potential

Under different pathological conditions, aberrant induction of neuronal nitric oxide synthase (nNOS) generates overproduction of NO that can cause irreversible cell damage. The aim of this study was to develop an amidoxime prodrug of a potent nNOS inhibitor, the benzhydryl acetamidine. We synthesized the benzhydryl acetamidoxime, which was evaluated in vitro to ascertain the potential NOS inhibitory activity, as well as conducting bioconversion into the parent acetamidine. The prodrug was also profiled for in vitro physicochemical properties, by determining the lipophilicity, passive permeation through the human gastrointestinal tract and across the blood-brain barrier by PAMPA, and chemical, enzymatic, and plasma stability. The obtained data demonstrate that the amidoxime prodrug shows an improved pharmacokinetic profile with respect to the acetamidine nNOS inhibitor, thus suggesting that it could be a promising lead compound to treat all those pathological conditions in which nNOS activity is dysregulated.

Superadsorbents for Strontium and Cesium Removal Enriched in Amidoxime by a Homo-IPN Strategy Connected with Porous Silica Texture

In light of the fact that two with good compatibility are better than one, the homo-interpenetrating polymer network (IPN) strategy was used in this work to design novel amidoxime (AOX)-interpenetrating networks into porous silica (PSi) with the final aim to enhance the sorption performances of composite sorbents toward Cs⁺ and Sr²⁺. To achieve this goal, first, a homo-IPN of poly(acrylonitrile) (PAN) was constructed inside the channels of two kinds of porous silica, one mesoporous (PSi1) and one macroporous (PSi2), the textural properties of silica being exploited in controlling the sorption performances of the composites. The novel composites were fully characterized by thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and the nitrogen sorption/desorption isotherms (Brunauer-Emmett-Teller (BET) analysis). The sorption properties of the PSi1/AOX and PSi2/AOX composite sorbents for Sr²⁺ and Cs⁺ were investigated in the batch mode to determine the effect of solution pH, contact time, initial metal ion concentration, temperature, and the presence of competitive ions on the adsorption performances. The fast kinetics of sorption was supported by the fact that ∼80% of Sr²⁺ and ∼65% of Cs⁺ were adsorbed in the first 30 min, the kinetic data being better described by the pseudo-second-order kinetic model. The experimental isotherms were well fitted by the Langmuir and Sips isotherm models. The superadsorption of Sr²⁺ and Cs⁺ is demonstrated by the values of the maximum sorption capacity of the best sorbent constructed with mesoporous silica (PSi1/IPN-AOX), which were 344.23 mg Cs⁺/g and 360.23 mg Sr²⁺/g. The sorption process was spontaneous and endothermic for both metal ions. The presence of interfering cations (Na⁺, K⁺, Ca²⁺, and Mg²⁺), at a concentration of 10^-2 M, only slightly influenced the sorption capacity for the main cation. The composite sorbents were still highly efficient after five sorption/desorption cycles.

Skeleton Engineering of Homocoupled Conjugated Microporous Polymers for Highly Efficient Uranium Capture via Synergistic Coordination

Developing efficient adsorbents for uranium enrichment is of great significance for resource sustainability and environmental safety. This study presents a facile and adaptable post-synthetic strategy to prepare highly efficient uranium adsorbents via engineering the π-conjugated skeletons of homocoupled conjugated microporous polymers (HCMPs). Taking advantage of the diyne units in the π-conjugated skeletons, bis-amidoxime uranophiles, one of the state-of-the-art ligands of uranyl ions, were introduced to the frameworks of HCMPs. The functionalized HCMPs preserved the interconnected 3D microporous networks and rigid conjugated skeletons with abundant bis-amidoxime ligands uniformly distributed in the pore channels. Such structural advantages of the adsorbents afforded very fast adsorption kinetics within 15 min to reach the equilibrium and high capacity of uranium (450 mg/g). Moreover, DFT calculation suggests a synergistic coordination as the most energetically favored coordination mode of the uranyl/bis-amidoxime complexes. This study contributes new insights into the underlying mechanism responsible for the highly efficient adsorption ability of the bis-amidoxime-functionalized HCMPs toward uranium. Meanwhile, the synthetic methodology established here could be extended to task-specific design and skeleton engineering of more functional HCMPs for broadened applications.

Amidoximes and Oximes: Synthesis, Structure, and Their Key Role as NO Donors

Nitric oxide (NO) is naturally synthesized in the human body and presents many beneficial biological effects; in particular on the cardiovascular system. Recently; many researchers tried to develop external sources to increase the NO level in the body; for example by using amidoximes and oximes which can be oxidized in vivo and release NO. In this review; the classical methods and most recent advances for the synthesis of both amidoximes and oximes are presented first. The isomers of amidoximes and oximes and their stabilities will also be described; (Z)-amidoximes and (Z)-oximes being usually the most energetically favorable isomers. This manuscript details also the biomimetic and biological pathways involved in the oxidation of amidoximes and oximes. The key role played by cytochrome P450 or other dihydronicotinamide-adenine dinucleotide phosphate (NADPH)-dependent reductase pathways is demonstrated. Finally, amidoximes and oximes exhibit important effects on the relaxation of both aortic and tracheal rings alongside with other effects as the decrease of the arterial pressure and of the thrombi formation

First-Principles Integrated Adsorption Modeling for Selective Capture of Uranium from Seawater by Polyamidoxime Sorbent Materials

Nuclear power is a relatively carbon-free energy source that has the capacity to be utilized today in an effort to stem the tides of global warming. The growing demand for nuclear energy, however, could put significant strain on our uranium ore resources, and the mining activities utilized to extract that ore can leave behind long-term environmental damage. A potential solution to enhance the supply of uranium fuel is to recover uranium from seawater using amidoximated adsorbent fibers. This technology has been studied for decades but is currently plagued by the material's relatively poor selectivity of uranium over its main competitor vanadium. In this work, we investigate the binding schemes between uranium, vanadium, and the amidoxime functional groups on the adsorbent surface. Using quantum chemical methods, binding strengths are approximated for a set of complexation reactions between uranium and vanadium with amidoxime functionalities. Those approximations are then coupled with a comprehensive aqueous adsorption model developed in this work to simulate the adsorption of uranium and vanadium under laboratory conditions. Experimental adsorption studies with uranium and vanadium over a wide pH range are performed, and the data collected are compared against simulation results to validate the model. It was found that coupling ab initio calculations with process level adsorption modeling provides accurate predictions of the adsorption capacity and selectivity of the sorbent materials. Furthermore, this work demonstrates that this multiscale modeling paradigm could be utilized to aid in the selection of superior ligands or ligand compositions for the selective capture of metal ions. Therefore, this first-principles integrated modeling approach opens the door to the in silico design of next-generation adsorbents with potentially superior efficiency and selectivity for uranium over vanadium in seawater.

Amidoxime Polymers for Uranium Adsorption: Influence of Comonomers and Temperature

Recovering uranium from seawater has been the subject of many studies for decades, and has recently seen significant progress in materials development since the U.S. Department of Energy (DOE) has become involved. With DOE direction, the uranium uptake for amidoxime-based polymer adsorbents has more than tripled in capacity. In an effort to better understand how these new adsorbent materials behave under different environmental stimuli, several experimental and modeling based studies have been employed to investigate impacts of competing ions, salinity, pH, and other factors on uranium uptake. For this study, the effect of temperature and type of comonomer on uranium adsorption by three different amidoxime adsorbents (AF1, 38H, AI8) was examined. Experimental measurements of uranium uptake were taken in 1−L batch reactors from 10 to 40 °C. A chemisorption model was developed and applied in order to estimate unknown system parameters through optimization. Experimental results demonstrated that the overall uranium chemisorption process for all three materials is endothermic, which was also mirrored in the model results. Model simulations show very good agreement with the data and were able to predict the temperature effect on uranium adsorption as experimental conditions changed. This model may be used for predicting uranium uptake by other amidoxime materials.

Ultrafast and Efficient Extraction of Uranium from Seawater Using an Amidoxime Appended Metal-Organic Framework

Enrichment of uranyl from seawater is crucial for the sustainable development of nuclear energy, but current uranium extraction technology suffers from multiple drawbacks of low sorption efficiency, slow uptake kinetics, or poor extraction selectivity. Herein, we prepared the first example of amidoxime appended metal-organic framework UiO-66-AO by a postsynthetic modification method for rapid and efficient extraction of uranium from seawater. UiO-66-AO can remove 94.8% of uranyl ion from Bohai seawater within 120 min and 99% of uranyl ion from Bohai seawater containing extra 500 ppb uranium within 10 min. The uranyl sorption capacity in a real seawater sample was determined to be 2.68 mg/g. In addition, the recyclability of the UiO-66-AO framework was demonstrated for at least three adsorption/desorption cycles. The origin for the superior sorption capability was further probed by extended X-ray absorption fine structure (EXAFS) analysis on the uranium-sorbed sample, suggesting multiple amidoxime ligands are able to chelate uranyl(VI) ions, forming a hexagonal bipyramid coordination geometry.

Successful Coupling of a Bis-Amidoxime Uranophile with a Hydrophilic Backbone for Selective Uranium Sequestration

The amidoxime group (-RNH₂NOH) has long been used to extract uranium from seawater on account of its high affinity toward uranium. The development of tunable sorbent materials for uranium sequestration remains a research priority as well as a significant challenge. Herein, we report the design, synthesis, and uranium sorption properties of bis-amidoxime-functionalized polymeric materials (BAP 1-3). Bifunctional amidoxime monomers were copolymerized with an acrylamide cross-linker to obtain bis-amidoxime incorporation as high as 2 mmol g^-1 after five synthetic steps. The resulting sorbents were able to uptake nearly 600 mg of uranium per gram of polymer after 37 days of contact with a seawater simulant containing 8 ppm uranium. Moreover, the polymeric materials exhibited low vanadium uptake with a maximum capacity of 128 mg of vanadium per gram of polymer. This computationally predicted and experimentally realized selectivity of uranium over vanadium, nearly 5 to 1 w/w, is one of the highest reported to date and represents an advancement in the rational design of sorbent materials with high uptake capacity and selectivity.

Study of Different Variants of Mo Enzyme crARC and the Interaction with Its Partners crCytb5-R and crCytb5-1

The mARC (mitochondrial Amidoxime Reducing Component) proteins are recently discovered molybdenum (Mo) Cofactor containing enzymes. They are involved in the reduction of several N-hydroxylated compounds (NHC) and nitrite. Some NHC are prodrugs containing an amidoxime structure or mutagens such as 6-hydroxylaminopurine (HAP). We have studied this protein in the green alga Chlamydomonas reinhardtii (crARC). Interestingly, all the ARC proteins need the reducing power supplied by other proteins. It is known that crARC requires a cytochrome b₅ (crCytb5-1) and a cytochrome b₅ reductase (crCytb5-R) that form an electron transport chain from NADH to the substrates. Here, we have investigated NHC reduction by crARC, the interaction with its partners and the function of important conserved amino acids. Interactions among crARC, crCytb5-1 and crCytb5-R have been studied by size-exclusion chromatography. A protein complex between crARC, crCytb5-1 and crCytb5-R was identified. Twelve conserved crARC amino acids have been substituted by alanine by in vitro mutagenesis. We have determined that the amino acids D182, F210 and R276 are essential for NHC reduction activity, R276 is important and F210 is critical for the Mo Cofactor chelation. Finally, the crARC C-termini were shown to be involved in protein aggregation or oligomerization.

Pore-Free Matrix with Cooperative Chelating of Hyperbranched Ligands for High-Performance Separation of Uranium

A new strategy combining a pore-free matrix and cooperative chelating was proposed in the present paper in order to effectively avoid undesired nonselective physical adsorption and intraparticle diffusion caused by pores and voids in porous sorbents, and to greatly enhance uranium-chelating capability based on hyperbranched amidoxime ligands on the surface of nanodiamond particles. Thus, a pore-free, amidoxime-terminated hyperbranched nanodiamond (ND-AO) was designed and synthesized. The experimental results demonstrate that the strategy endows the as-synthesized ND-AO with the following expected features: (1) distinctively high uranium selectivity (S_U = q_e-U/q_e-tol × 100%) from over 80% to nearly 100% over the whole weak acidity range (pH < 4.5); especially, the S_U can reach up to unprecedented >91% at pH 4.5, more than 20% of selectivity increment over any analogous sorbent materials reported so far, with a uranium sorption capacity of 121 mg/g in simulated nuclear industry effluent samples containing 12 coexistent nuclide ions; (2) superfast equilibrium sorption time of <30 s; and (3) one of the highest distribution coefficients (K_d) of ∼3 × 10⁶ mL/g for U(VI) as well as a fairly high sorption capacity of 212 mg/g at pH 4.5 in pure uranium solution. The strategy could also provide an optional approach for the design and fabrication of other new high-performance sorbing materials with prospective applications in selective separation of other interested metal ions.

Pyridine and p-Nitrophenyl Oxime Esters with Possible Photochemotherapeutic Activity: Synthesis, DNA Photocleavage and DNA Binding Studies

Compared to standard treatments for various diseases, photochemotherapy and photo-dynamic therapy are less invasive approaches, in which DNA photocleavers represent promising tools for novel “on demand” chemotherapeutics. A series of p-nitrobenzoyl and p-pyridoyl ester conjugated aldoximes, amidoximes and ethanone oximes were subjected to UV irradiation at 312 nm with supercoiled circular plasmid DNA. The compounds which possessed appropriate properties were additionally subjected to UVA irradiation at 365 nm. The ability of most of the compounds to photocleave DNA was high at 312 nm, whereas higher concentrations were required at 365 nm as a result of their lower UV absorption. The affinity of selected compounds to calf-thymus (CT) DNA was studied by UV spectroscopy, viscosity experiments and competitive studies with ethidium bromide (EB) revealing that all compounds interacted with CT DNA. The fluorescence emission spectra of the pre-treated EB-DNA exhibited a moderate to significant quenching in the presence of the compounds indicating the binding of the compounds to CT DNA via intercalation as concluded also by DNA-viscosity experiments. For the oxime esters the DNA photocleavage and affinity studies aimed to clarify the role of the oxime nature (aldoxime, ketoxime, amidoxime) and the role of the pyridine and p-nitrophenyl moieties both as oxime substituents and ester conjugates.

Bacterial Cellulose Supported Gold Nanoparticles with Excellent Catalytic Properties

Amidoxime surface functionalized bacterial cellulose (AOBC) has been successfully prepared by a simple two-step method without obviously changing the morphology of bacterial cellulose. AOBC has been used as the reducing agent and carrier for the synthesis of gold nanoparticles (AuNPs) that distributed homogeneously on bacterial cellulose surface. Higher content in amidoxime groups in AOBC is beneficial for the synthesis of AuNPs with smaller and more uniform size. The AuNPs/AOBC nanohybrids have excellent catalytic activity for reduction of 4-nitrophenol (4-NP) by using NaBH4. It was found that catalytic activity of AuNPs/AOBC first increases with increasing NaBH4 concentration and temperature, and then leveled off at NaBH4 concentration above 238 mM and temperature above 50 °C. Moreover, AuNPs with smaller size have higher catalytic activity. The highest apparent turnover frequency of AuNPs/AOBC is 1190 h(-1). The high catalytic activity is due to the high affinity of 4-NP with AuNPs/AOBC and the reduced product 4-aminophenol has good solubility in water in the presence of AuNPs/AOBC. The catalytic stability of the AuNPs/AOBC was estimated by filling a fluid column contained AuNPs/AOBC and used for continuously catalysis of the reduction of 4-NP by using NaBH4. The column works well without detection of 4-NP in the eluent after running for more than two months, and it is still running. This work provides an excellent catalyst based on bacterial cellulose stabilized AuNPs and has promising applications in industry.

3-Glucosylated 5-amino-1,2,4-oxadiazoles: synthesis and evaluation as glycogen phosphorylase inhibitors

Glycogen phosporylase (GP) is a promising target for the control of glycaemia. The design of inhibitors binding at the catalytic site has been accomplished through various families of glucose-based derivatives such as oxadiazoles. Further elaboration of the oxadiazole aromatic aglycon moiety is now reported with 3-glucosyl-5-amino-1,2,4-oxadiazoles synthesized by condensation of a C-glucosyl amidoxime with N,N’-dialkylcarbodiimides or Vilsmeier salts. The 5-amino group introduced on the oxadiazole scaffold was expected to provide better inhibition of GP through potential additional interactions with the enzyme’s catalytic site; however, no inhibition was observed at 625 µM.