Thermochemical Analysis of Ammonia Gas Sorption by Struvite from Livestock Wastes and Comparison with Biochar and Metal-Organic Framework Sorbents

Mechanistic insights into oxychar' s role in mitigating ammonia volatilization from fertilised alkaline soils

Mitigating ammonia (NH3) volatilization from fertilised alkaline soils is crucial for promoting environmental sustainability and safeguarding public health. In this study, "oxychar" was prepared from an agricultural waste via a low-temperature partial-oxidation (LTPO) process under oxygen-sufficient environment. The optimum modification temperature was 220 °C for a duration of 3 h, yielding a maximum NH3 uptake of 76.4 mg/g by oxychar. The enhanced adsorption capacity and stability are attributed to the increased surface oxygen-containing functional groups (OCFGs) that act as adsorption sites, as well as the presence of ultra-micropores that facilitate effective trapping. When applying optimised oxychar to 21-day incubation studies, it is found that cumulative NH3 volatilization is reduced by 76.3 %-91.6 % with oxychar application rates of 1 %-3 %, compared to urea treatments. Soil property and microbial community analyses further indicate that oxychar promotes the hydrolysis of urea and the reduction of nitrate to ammonium by dissimilation (DNRA) processes while inhibiting nitrification by modulating microbial communities, resulting in higher ammonium and lower nitrate levels in soil compared to urea treatment. However, the enriched ammonium cannot volatilize freely due to the chemisorption of ammonium and NH3 by oxychar via ionic and covalent bonds, respectively. Introducing oxychar to soil could be a promising approach to mitigate NH3 volatilization from fertilised soil to ensure food security and environmental sustainability.

A novel method for production of nitrogen fertilizer with low energy consumption by efficiently adsorbing and separating waste ammonia

Recovering waste NH3 to be used as a source of nitrogen fertilizer or liquid fuel has recently attracted much attention. Current methods mainly utilize activated carbon or metal-organic frameworks to capture NH3, but are limited due to low NH3 adsorption capacity and high cost, respectively. In this study, novel porous materials that are low cost and easy to synthesize were prepared as NH3 adsorbents by precipitation polymerization with acid optimization. The results showed that adsorption sites (‒COOH, -OH, and lactone) which form chemical adsorption or hydrogen bonds with NH3 were successfully regulated by response surface methods. Correspondingly, the dynamic NH3 adsorption capacity increased from 5.45 mg g-1 to 129 mg g-1, which is higher than most known activated carbon and metal-organic frameworks. Separation performance tests showed that NH3 could also be separated from CO2 and CH4. The findings in this study will advance the industrialization of NH3 polymer adsorbents and provide technical support for the recycling of waste NH3.

Structure and functional group regulation of plastics for efficient ammonia capture

Activated carbon and metal organic frameworks have been tested as NH₃ recovery adsorbents, however, they are limited due to low NH₃ adsorption capacity and high cost, respectively. In this study, ethylene glycol dimethacrylate (EGDMA) polymers as the representative ester plastics were tested, and their structure and adsorption sites were regulated using HNO₃, HCl, or H₂SO₄ with varied H⁺ concentrations. The results showed that the EGDMA polymers all used hydrolysis which promoted NH₃ adsorption via different mechanisms. With HNO₃ and HCl optimization, an increased surface area promoted NH₃ adsorption via physical forces. H₂SO₄ optimization resulted in -COOH, -OH, and -SO₃H formation, which reacted with NH₃ by chemical adsorption and hydrogen bonds. This significantly increased the NH₃ adsorption capacity (85.99 mg·g^-1) compared to the material before optimization (0.36 mg·g^-1). This study presents a novel low-cost and efficient method to recycle waste plastics as NH₃ adsorbents.

Heteroatom-Doped Porous Carbons as Effective Adsorbers for Toxic Industrial Gasses

Ammonia (NH3), often stored in large quantities before being used in the production of fertilizer, and sulfur dioxide (SO2), a byproduct of fossil fuel consumption, particularly the burning of coal, are highly toxic and corrosive gases that pose a significant danger to humans if accidentally released. Therefore, developing advanced materials to enable their effective capture and safe storage is highly desired. Herein, advanced benzimidazole-derived carbons (BIDCs) with an exceptional capacity for NH3 and SO2 have been designed and tested. These heteroatom-doped porous carbon adsorbents were synthesized by thermolysis of imidazolate-potassium salts affording high surface area and controlled heteroatom content to optimize for rapid NH3 and SO2 gas uptake and release under practical conditions. According to gas uptake measurements, these nitrogen-doped carbons exhibit exceptional gas adsorption capacity, with BIDC-3-800 adsorbing 21.42 mmol/g SO2 at 298 K and 1 bar, exceeding most reported porous materials and BIDC-2-700 adsorbing 14.26 mmol/g NH3 under the same conditions. The NH3 uptake of BIDC-2-700 surpassed reported activated carbons and is among the best adsorbents including metal organic frameworks (MOFs). Our synthetic method allows for control over both textural and chemical properties of the carbon and enables heteroatom functionality to be incorporated directly into the carbon framework without the need for postsynthetic modification. These materials were also tested for recyclability; all adsorbents showed almost complete retention of their initial gas uptake capacity during recyclability studies and maintained their structural integrity and their previous adsorption capacity of both NH3 and SO2, highlighting their potential for practical application.

Integration of Micro-Nano-Engineered Hydroxyapatite/Biochars with Optimized Sorption for Heavy Metals and Pharmaceuticals

From the perspective of treating wastes with wastes, bamboo sawdust was integrated with a hydroxyapatite (HAP) precursor to create engineered nano-HAP/micro-biochar composites (HBCs) by optimizing the co-precipitated precursor contents and co-pyrolysis temperature (300, 450, 600 °C). The physicochemical properties of HBCs, including morphologies, porosities, component ratios, crystalline structures, surface elemental chemical states, surface functional groups, and zeta potentials as a function of carbonization temperatures and components of precursors, were studied. Biochar matrix as an efficient carrier with enhanced specific surface area to prevent HAP from aggregation was desired. The sorption behavior of heavy metal (Cu(II), Cd(II), and Pb(II)) and pharmaceuticals (carbamazepine and tetracycline) on HBCs were analyzed given various geochemical conditions, including contact time, pH value, ionic strength, inferencing cations and anions, coexisting humic acid, and ambient temperature. HBCs could capture these pollutants efficiently from both simulated wastewaters and real waters. Combined with spectroscopic techniques, proper multiple dominant sorption mechanisms for each sorbate were elucidated separately. HBCs presented excellent reusability for the removal of these pollutants through six recycles, except for tetracycline. The results of this study provide meaningful insight into the proper integration of biochar-mineral composites for the management of aquatic heavy metals and pharmaceuticals.

Ethylene dimethacrylate used as an NH3 adsorbent with high adsorption capacity and selectivity

NH₃ molecularly imprinted polymers (NH₃-MIPs) were synthesized that could successfully separate and recover NH₃ during sludge aerobic composting; however, increased toluene usage during the adsorbent preparation incurred a high cost and severe environmental risks. The purpose of this study was to reduce toluene usage by optimizing the reagent composition of NH₃-MIPs, based on maintaining a high NH₃ adsorption capacity and selectivity. Five adsorbent groups, including NH₃-MIPs, and NH₃-Ethylene dimethacrylate adsorbents (NH₃-EGDMA) with 0%, 75%, 90%, and 100% toluene reduction efficiencies, were prepared and tested for their adsorption performance. The results showed that NH₃-EGDMA with 75% toluene reduction not only had a high NH₃ adsorption capacity (104.42 mg g^-1) but also had a high separation factor for NH₃/methyl sulfide (3121) and NH₃/dimethyl disulfide (4597). The adsorption mechanism was identified as a chemical force between NH₃ and NH₃-EGDMA with a 75% toluene reduction using the analysis of the kinetic model. This study significantly reduces NH₃ adsorbent cost as well as harm to the environment during the adsorbent preparation, which was beneficial to the popularization and application of this NH₃ adsorbent.

Persistence and Recovery of ZIF-8 and ZIF-67 Phytotoxicity

Zeolitic imidazolate frameworks (ZIFs) have been developed quickly and have attracted considerable attention for use in the detection and removal of various pollutants. Understanding the environmental risks of ZIFs is a prerequisite to their safe application by industry and new chemical registration by governments; however, the persistence and recovery of toxicity induced by ZIFs remain largely unclear. This study finds that typical ZIFs (e.g., ZIF-8 and ZIF-67) at a concentration of 0.01-1 mg/L induce significant algal growth inhibition, plasmolysis, membrane permeability, chloroplast damage, and chlorophyll biosynthesis, and the above alterations are recoverable. Unexpectedly, a persistent decrease in reactive oxygen species (ROS) is observed due to the quenching of hydroxyl free radicals. The adverse effects of ZIF-8 are weak and easily alleviated compared with those of ZIF-67. ZIF-8 is internalized mainly by caveolae-mediated endocytosis, while ZIF-67 is internalized mainly by clathrin-mediated endocytosis. Omics studies reveal that the downregulation of mRNA associated with oxidative phosphorylation and the inhibition of chlorophyll and adenosine triphosphate (ATP) synthesis in mitochondria are related to the persistence of phytotoxicity. These findings highlight the phenomena and mechanisms of the persistence and recovery of phytotoxicity, indicating the need to reconsider the environmental risk assessments of ZIFs.