Ionic Strength Effect Triggers Brown Carbon Formation through Heterogeneous Ozone Processing of Ortho-Vanillin

Research progress on secondary formation, photosensitive reaction mechanism and human health effects of chromophoric brown carbon

Brown carbon (BrC) has attracted widespread attention because of its strong absorption of solar radiation in the ultraviolet-visible wavelength range, which causes adverse impacts on human health. Originally, BrC was a physically defined class of substances. However, current research has gradually shifted towards the identification of its chemical groups, because its light-absorbing capability, chemical properties and health effects mainly depend on the chemical composition of its chromophores. Therefore, this review mainly focuses on the chemical understanding of BrC based on chromophores, and the secondary formation mechanism of chromophores, photosensitized reactions, and human health effects of BrC were detailly summarized. Firstly, BrC chromophores are divided into five categories: nitrogen-heterocycles, nitrogen-chain, aromatic species, oligomers and sulfur-containing organic compounds. Different chromophore precursor species exhibit variations, and their formation mechanisms are also distinct. Secondly, BrC can trigger the production of secondary organic aerosol (SOA) precursors or cause SOA growth because BrC is an important component of light-absorbing particles formed during incomplete combustion of biomass and fossil fuels, potentially exerting adverse effects on human health. Finally, developing sufficiently separated methods for BrC and refining algorithms and machine learning can lead to a more effective understanding of the chemical composition of chromophores, thus enabling better evaluation of the atmospheric effects and health impacts of BrC. In all, this review provides new insights into the categories of BrC chromophores and new advance in secondary formation mechanisms, photosensitized reactions, and human health effects on the basis of chemical structures.

Reaction kinetics and molecular characterization of the compounds formed by photosensitized degradation of the plastic additive bisphenol A in the atmospheric aqueous phase

Bisphenol A (BPA, 4,4'-(propane-2,2-diyl)diphenol) is a common plasticizer that is very widespread in the environment and is also found at significant concentrations in the global oceans, due to contamination by plastics. Here we show that triplet sensitization is an important degradation pathway for BPA in natural surface waters, which could prevail if the water dissolved organic carbon is above 2-3 mgC L-1. Bromide levels as per seawater conditions have the potential to slow down BPA photodegradation, a phenomenon that could not be offset by reaction of BPA with Br2•- (second-order reaction rate constant of (2.54 ± 0.09) × 108 M-1 s-1). Ultra-high resolution mass spectrometry revealed that the presence of inorganic salts (NaCl and NaBr) markedly increased the complexity of the observed CHO product compounds formed upon photosensitized degradation of BPA. The obtained results suggest that bisphenols can be efficiently removed by photosensitized reactions and generate higher number of oligomers and polyaromatic compounds in the sea surface and liquid water of marine aerosols compared to freshwaters and/or dilute cloud-water. Considering that polyaromatic compounds absorb solar actinic radiation, these results suggest that inorganic salts could significantly affect the photosensitized degradation of bisphenols and consequently influence the light-absorbing properties of marine aerosols and, ultimately, the Earth's radiative balance.

Probing nitro(so) and chloro byproducts and their precursors in natural organic matter during UV/NH2Cl treatment by FT-ICR MS with machine learning insights

The UV/monochloramine (UV/NH2Cl) process, while efficiently eliminating micropollutants, produces toxic byproducts. This study utilized Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) to investigate molecular-level changes in natural organic matter (NOM) and to disclose formation pathways of nitro(so) and chloro byproducts in the UV/NH2Cl process. The UV/NH2Cl process significantly increased the saturation and oxidation levels and altered the elemental composition of NOM. Using 15N labeling and a screening workflow, nitro(so) byproducts with nitrogen originating from inorganic sources (i.e., reactive nitrogen species (RNS) and/or NH2Cl) were found to exhibit total intensities comparable to those from NOM. RNS, rather than NH2Cl, played a significant role in incorporating nitrogen into NOM. Through linkage analysis, nitro(so) addition emerged as an important reaction type among the 25 reaction types applied. By using phenol as a representative model compound, the nitro byproducts were confirmed to be mainly generated through the oxidation of nitroso byproducts instead of nitration. Machine learning and SHAP analysis further identified the major molecular indices distinguishing nitro(so) and chloro precursors from non-precursors. This study enhances our fundamental understanding of the mechanisms driving the generation of nitro(so) and chloro byproducts from their precursors in complex NOM during the UV/NH2Cl process.

Aqueous-phase formation of N-containing secondary organic compounds affected by the ionic strength

The reaction of carbonyl-to-imine/hemiaminal conversion in the atmospheric aqueous phase is a critical pathway to produce the light-absorbing N-containing secondary organic compounds (SOC). The formation mechanism of these compounds has been wildly investigated in bulk solutions with a low ionic strength. However, the ionic strength in the aqueous phase of the polluted atmosphere may be higher. It is still unclear whether and to what extent the inorganic ions can affect the SOC formation. Here we prepared the bulk solution with certain ionic strength, in which glyoxal and ammonium were mixed to mimic the aqueous-phase reaction. Molecular characterization by High-resolution Mass Spectrometry was performed to identify the N-containing products, and the light absorption of the mixtures was measured by ultraviolet-visible spectroscopy. Thirty-nine N-containing compounds were identified and divided into four categories (N-heterocyclic chromophores, high-molecular-weight compounds with N-heterocycle, aliphatic imines/hemiaminals, and the unclassified). It was observed that the longer reaction time and higher ionic strength led to the formation of more N-heterocyclic chromophores and the increasing of the light-absorbance of the mixture. The added inorganic ions were proposed to make the aqueous phase somewhat viscous so that the molecules were prone to undergo consecutive and intramolecular reactions to form the heterocycles. In general, this study revealed that the enhanced ionic strength and prolonged reaction time had the promotion effect on the light-absorbing SOC formation. It implies that the aldehyde-derived aqueous-phase SOC would contribute more light-absorbing particulate matter in the industrial or populated area where inorganic ions are abundant.

Formation of nitrogen-containing gas phase products from the heterogeneous (photo)reaction of NO2 with gallic acid

Heterogeneous reaction of gas phase NO2 with atmospheric humic-like substances (HULIS) is potentially an important source of volatile organic compounds (VOCs) including nitrogen (N)-containing compounds, a class of brown carbon of emerging importance. However, the role of ubiquitous water-soluble aerosol components in this multiphase chemistry, namely nitrate and iron ions, remains largely unexplored. Here, we used secondary electrospray ionization ultrahigh-resolution mass spectrometry for real-time measurements of VOCs formed during the heterogeneous reaction of gas phase NO2 with a solution containing gallic acid (GA) as a proxy of HULIS at pH 5 relevant for moderately acidic aerosol particles. Results showed that the number of detected N-containing organic compounds largely increased from 4 during the NO2 reaction with GA in the absence of nitrate and iron ions to 55 in the presence of nitrate and iron ions. The N-containing compounds have reduced nitrogen functional groups, namely amines, imines and imides. These results suggest that the number of N-containing compounds is significantly higher in deliquescent aerosol particles due to the influence of relatively higher ionic strength from nitrate ions and complexation/redox reactivity of iron cations compared to that in the dilute aqueous phase representative of cloud, fog, and rain water.

Photoinduced production of substances with humic-like fluorescence, upon irradiation of water samples from alpine lakes

Evidence is here provided that irradiation of some lake water samples can trigger the formation of fluorophores with humic-like properties, at the same time increasing water absorbance. This phenomenon is the opposite of photobleaching, which is often observed when natural waters are irradiated. The photoproduced humic-like fluorophores observed here would be of autochthonous rather than allochthonous origin, which marks a difference with the fraction of humic substances that derives from terrestrial sources. Photogeneration of humic-like compounds can be highlighted in water samples where the fluorescence signal of initially occurring humic substances is low, so that their photobleaching is minimised. Samples that are most likely to show photoinduced formation of humic-like fluorophores are in fact characterised by high values of protein-like vs. humic-like contribution ratios to fluorescence, as evidenced by parallel factor (PARAFAC) analysis. Mountain lakes in late summer appear to be suitable candidates to highlight the described phenomenon. In some cases, lake-water irradiation caused a decrease in the spectral slope of the absorbance that, together with increasing absorbance values, is consistent with an increase in molecular mass and aromaticity of organic matter. The absorbance increase triggered by irradiation might play a role in screening biologically harmful UV radiation, in mountain environments that would otherwise be characterised by very clear water that allows for easy transmission of UV light along the water column.

Real-time measurements of product compounds formed through the reaction of ozone with breath exhaled VOCs

Human presence can affect indoor air quality because of secondary organic compounds formed upon reactions between gaseous oxidant species, e.g., ozone (O₃), hydroxyl radicals (OH), and chemical compounds from skin, exhaled breath, hair and clothes. We assess the gas-phase product compounds generated by reactions of gaseous O₃ with volatile organic compounds (VOCs) from exhaled human breath by real time analysis using a high-resolution quadrupole-orbitrap mass spectrometer (HRMS) coupled to a secondary electrospray ionization (SESI) source. Based on the product compounds identified we propose a reaction mechanism initiated by O₃ oxidation of the most common breath constituents, isoprene, α-terpinene and ammonia (NH₃). The reaction of O₃ with isoprene and α-terpinene generates ketones and aldehydes such as 3,4-dihydroxy-2-butanone, methyl vinyl ketone, 3-carbonyl butyraldehyde, formaldehyde and toxic compounds such as 3-methyl furan. Formation of compounds with reduced nitrogen containing functional groups such as amines, imines and imides is highly plausible through NH₃ initiated cleavage of the C-O bond. The detected gas-phase product compounds suggest that human breath can additionally affect indoor air quality through the formation of harmful secondary products and future epidemiological studies should evaluate the potential health effects of these compounds.

Surface Oxidation of Phenolic Aldehydes: Fragmentation, Functionalization, and Coupling Reactions

Substantial amounts of phenolic aldehydes, represented by the structures of syringaldehyde, vanillin, and 4-hydroxybenzaldehyde, are emitted to the atmosphere during biomass burning. The oxidative transformation of phenolic aldehydes during atmospheric transport has the potential to modify the physicochemical properties of particulates, which play a vital role in Earth's climate and human health. Herein, thin solid films made of syringaldehyde, vanillin, and 4-hydroxybenzaldehyde are oxidized in contact with O3(g) under a relative humidity of 74% representative of average global conditions. New physical insights into the surface reactions are achieved by analyzing isopropanol-extracted films before and during oxidation by multiple techniques. Changes in electronic transitions at 220, 310, and 350-400 nm registered by UV-vis spectroscopy show that the oxidized films have enhanced mass absorption coefficients at λ > 300 nm. Electrospray ionization (ESI) mass spectrometry (MS) and ion chromatography with conductivity and MS detection of extracted oxidized films confirm aromatic ring cleavage of syringaldehyde and vanillin by O3(g) with the production of carboxylic acids. Carboxylic acids were observed as anions ([M - H]-) at m/z 45 (formic acid), 73 (glyoxylic acid), 75 (glycolic acid), 89 (oxalic acid), 115 (maleic acid), 117 (mesoxalic acid), 119 (tartronic acid), and 129 (maleic acid monomethyl ester), while other polyfunctional products were registered by ultrahigh-pressure liquid chromatography with UV-vis and MS detection. In situ production of hydroxyl radicals is confirmed by demethoxylation products and ipso attack at the C1 ring position holding the -C(H)═O group. The order of reactivity increased with the number of methoxy substituents that donate electron density to the aromatic ring. Combined oxidation mechanisms for the three compounds are proposed based on all of the experimental observations and explain the contribution of aged biomass burning material to secondary organic aerosol formation.

Physical and chemical characterization of urban grime: An impact on the NO2 uptake coefficients and N-containing product compounds

Urban grime represents an important environmental surface for heterogeneous reactions in urban environment. Here, we assess the physical and chemical properties of urban grime collected during six consecutive months in downtown of Guangzhou, China. There is a significant variation of the uptake coefficients of NO₂ on the urban grime as a function of the relative humidity (RH). In absence of water molecules (0% RH), the light-induced uptake coefficients of NO₂ on urban grime samples collected during six months are very similar in order of ≈10^-6. At 80% RH, depending on the sampling month the light-induced uptake coefficient of NO₂ can reach one order of magnitude higher values (1.5 × 10^-5, at 80% RH) compared to those uptakes at 0% RH. In presence of 80% RH, there are strong correlations between the measured NO₂ uptakes and the concentrations of the water soluble carbon, soluble anions, polycyclic aromatic hydrocarbons and n-alkanes depicted in the urban grime. These correlations, demonstrate that surface adsorbed water on urban grime play an important role for the uptakes of NO₂. The heterogeneous conversion of NO₂ on two-month old urban grime under sunlight irradiation (68 W m^-2, 300 nm < λ < 400 nm) at 60% RH leads to the formation of unprecedented HONO surface flux of 4.7 × 10¹⁰ molecules cm^-2 s^-1 which is higher than all previously observed HONO fluxes, thereby affecting the oxidation capacity of the urban atmosphere. During the heterogeneous chemistry of NO₂ with urban grime, the unsaturated and N-containing organic compounds are released in the gas phase which can affect the air quality in the urban environment.

pH modifies the oxidative potential and peroxide content of biomass burning HULIS under dark aging

Humic-like substances (HULIS) account for a major redox-active fraction of biomass burning organic aerosols (BBOA). During atmospheric transport, fresh acidic BB-HULIS in droplets and humid aerosols are subject to neutralization and pH-modified aging process. In this study, solutions containing HULIS isolated from wood smoldering emissions were first adjusted with NaOH and NH₃ to pH values in the range of 3.6-9.0 and then aged under oxic dark conditions. Evolution of HULIS oxidative potential (OP) and total peroxide content (equivalent H₂O₂ concentration, H₂O₂eq) were measured together with the changes in solution absorbance and chemical composition. Notable immediate responses such as peroxide generation, HULIS autoxidation, and an increase in OP and light absorption were observed under alkaline conditions. Initial H₂O₂eq, OP, and absorption increased exponentially with pH, regardless of the alkaline species added. Dark aging further oxidized the HULIS and led to pH-dependent toxic and chemical changes, exhibiting an alkaline-facilitated initial increase followed by a decrease of OP and H₂O₂eq. Although highly correlated with HULIS OP, the contributions of H₂O₂eq to OP are minor but increased both with solution pH and dark aging time. Alkalinity-assisted autoxidation of phenolic compounds and quinoids with concomitant formation of H₂O₂ and other alkalinity-favored peroxide oxidation reactions are proposed here for explaining the observed HULIS OP and chemical changes in the dark. Our findings suggest that alkaline neutralization of fresh BB-HULIS represents a previously overlooked peroxide source and pathway for modifying aerosol redox-activity and composition. Additionally, these findings imply that the lung fluid neutral environment can modify the OP and peroxide content of inhaled BB-HULIS. The results also suggest that common separation protocols of HULIS using base extraction methods should be treated with caution when evaluating and comparing their composition, absorption, and relative toxicity.

Inorganic Ions Enhance the Number of Product Compounds through Heterogeneous Processing of Gaseous NO2 on an Aqueous Layer of Acetosyringone

Methoxyphenols represent important pollutants that can participate in the formation of secondary organic aerosols (SOAs) through chemical reactions with atmospheric oxidants. In this study, we determine the influence of ionic strength, pH, and temperature on the heterogeneous reaction of NO₂ with an aqueous film consisting of acetosyringone (ACS), as a proxy for methoxyphenols. The uptake coefficient of NO₂ (50 ppb) on ACS (1 × 10^-5 mol L^-1) is γ = (9.3 ± 0.09) × 10^-8 at pH 5, and increases by one order of magnitude to γ = (8.6 ± 0.5) × 10^-7 at pH 11. The lifetime of ACS due to its reaction with NO₂ is largely affected by the presence of nitrate ions and sulfate ions encountered in aqueous aerosols. The analysis performed by membrane inlet single-photon ionization-time-of-flight mass spectrometry (MI-SPI-TOFMS) reveals an increase in the number of product compounds and a change of their chemical composition upon addition of nitrate ions and sulfate ions to the aqueous thin layer consisting of ACS. These outcomes indicate that inorganic ions can play an important role during the heterogeneous oxidation processes in aqueous aerosol particles.

Organic Coating Reduces Hygroscopic Growth of Phase-Separated Aerosol Particles

A large fraction of secondary aerosol particles are liquid-liquid phase-separated with an organic shell and an inorganic core. This has the potential to regulate the hygroscopicity of such particles, with significant implications for their optical properties, reactivity, and lifetime. However, it is unclear how this phase separation affects the hygroscopic growth of the particles. Here, we showed a large variation in hygroscopic growth (e.g., 1.14-1.32 under a relative humidity (RH) of 90%) of particles from the forest and urban atmosphere, which had different average core-shell ratios. For this reason, a controlled laboratory experiment further quantifies the impact of the organic shell on particle growth with different RH values. Laboratory experiments demonstrated that (NH₄)₂SO₄ particles with thicker secondary organic shells have a lower growth factor at an RH below 94%. Organic shells started to deliquesce first (RH > 50%) and the phase changes of sulfate cores from solid to liquid took place at an RH higher than 80% as deliquescence relative humidity of pure (NH₄)₂SO₄. Our study provides the first direct evidence on an individual particle basis that hygroscopic growth behavior of phase-separated particles is dependent on the thickness of organic shells, highlighting the importance of organic coating in water uptake and possible heterogeneous reactions of the phase-separated particles.