Knowledge Gaps in Polymer Biodegradation Research

Study on the biodegradation of thermoplastic starch and bacterial cellulose based sandwich panel biocomposites

There is currently a growing interest in biopolymers, such as bacterial cellulose and thermoplastic starch, which are renewable and abundantly available in nature. This study investigated the multilayer sandwich composite with thermoplastic starch and bacterial cellulose, using water (TPS/BC-w) and glycerol (TPS/BC-g) as coupling agents. The composites produced by compression molding resulted in a homogeneous, transparent and flexible structure. TPS/BC-w showed superior mechanical property and better adhesion compared to TPS/BC-g. Therefore, the permeability, biodegradation, hydrothermal aging and stability analyses were conducted only for TPS/BC-w. The water vapor permeability of TPS/BC-w is 6.7 times lower than that of thermoplastic starch, indicating better barrier performance. Thermoplastic starch and bacterial cellulose degraded in about 9 days, and TPS/BC-w degraded in 60 days. Biodegradation analysis by CO₂ release confirmed the complete biodegradation process, with CO₂ emissions of 57 %, 42.5 % and 39.6 % after 120 days for thermoplastic starch, bacterial cellulose and TPS/BC-w, respectively. TPS/BC-w remained intact for more than a year, in an environment without direct contact with soil or water. These results indicate that TPS/BC-w composed of natural macromolecules may exhibit functional properties and is useful for applications such as short-shelf-life packaging, particularly for dry products, due to its barrier properties and controlled biodegradability.

Lack of functional polyester-biodegrading potential in marine versus terrestrial environments evidenced by an innovative airbrushing technique

Biodegradable plastics, primarily aliphatic polyesters, degrade to varying extents in different environments. However, the absence of easily implementable techniques for screening microbial biodegradation potential -coupled with the limitations of non-functional omics analyses- has restricted comparative studies across diverse polymer types and ecosystems. In this study, we optimized a novel airbrushing method that facilitates functional analyses by simplifying the preparation of polyester-coated plates for biodegradation screening. By repurposing an airbrush kit, polyester microparticles (MPs) could be evenly sprayed onto solid media, enabling rapid detection of extracellular depolymerizing activity via clearing zone halos. This technique was effective in screening both isolated microbial cultures and natural environmental samples, demonstrating its versatility. The method was successfully applied across multiple environments, ranking the biodegradability of six polyesters, from most to least biodegradable: poly[(R)-3-hydroxybutyrate] (PHB), polycaprolactone (PCL), poly(ethylene succinate) (PES), poly(butylene succinate) (PBS), poly(lactic acid) (PLA), and poly(butylene adipate-co-terephthalate) (PBAT). Most notably, it revealed a consistent 1,000-fold higher biodegradation potential in terrestrial compared to marine environments. This approach offers a valuable tool for isolating novel polyester-degrading microbes with significant biotechnological potential, paving the way for improved plastic waste management solutions.

When plastisphere and drilosphere meet: Earthworms facilitate microbiome and nutrient turnover to accelerate biodegradation of agricultural plastic films

Agricultural plastic mulching films have been an environmental concern for decades. The effects of the interactions between the anthropogenic plastisphere and other soil biospheres, particularly that of earthworms, on the fate of plastics remain poorly understood. Here, we investigated the decomposition of buried nonbiodegradable low-density polyethylene (LDPE) versus biodegradable PBTA/PLA copolymers in the presence of earthworms (Amynthas cortices) in dynamic microcosms. Earthworms significantly enhanced the biodegradation of plastic films in situ, as confirmed by mass reduction, surface modification, and changes in the molecular weights of films. Notably, the PBTA/PLA films exhibited a 1.41-fold increase in mass loss and a 5.69% reduction in the number-average molecular weight when incubated with earthworms. Earthworms influenced the microbial assembly within the plastisphere by increasing both bacterial and fungal biodiversity, as well as their network complexity. The time-decay patterns in the abundance of keystone degrader taxa, including the genera Noviherbaspirillum, Rhizobacter, and Mortierella, were mitigated by earthworms over the 60-day period. Additionally, earthworms preferentially consumed recalcitrant dissolved organic matter in LDPE and PBAT/PLA plastisphere soils, thereby increasing the bioavailability of components that serve as nutrient supplies for plastisphere microbiomes. Our findings demonstrate that earthworms enhance the decomposition of plastics in soils via cross-species interplay within the plastisphere and drilosphere, contributing not only to soil conditioning and biodiversity but also to plastic biodegradation in natural agroecosystems.

Polymer Biodegradation in Aquatic Environments: A Machine Learning Model Informed by Meta-Analysis of Structure-Biodegradation Relationships

Polymers are widely produced and contribute significantly to environmental pollution due to their low recycling rates and persistence in natural environments. Biodegradable polymers, while promising for reducing environmental impact, account for less than 2% of total polymer production. To expand the availability of biodegradable polymers, research has explored structure-biodegradability relationships, yet most studies focus on specific polymers, necessitating further exploration across diverse polymers. This study addresses this gap by curating an extensive aerobic biodegradation data set of 74 polymers and 1779 data points drawn from both published literature and 28 sets of original experiments. We then conducted a meta-analysis to evaluate the effects of experimental conditions, polymer structure, and the combined impact of polymer structure and properties on biodegradation. Next, we developed a machine learning model to predict polymer biodegradation in aquatic environments. The model achieved an Rtest2 score of 0.66 using Morgan fingerprints, detailed experimental conditions, and thermal decomposition temperature (Td) as the input descriptors. The model's robustness was supported by a feature importance analysis, revealing that substructure R-O-R in polyethers and polysaccharides positively influenced biodegradation, while molecular weight, Td, substructure -OC(═O)- in polyesters and polyalkylene carbonates, side chains, and aromatic rings negatively impacted it. Additionally, validation against the meta-analysis findings confirmed that predictions for unseen test sets aligned with established empirical biodegradation knowledge. This study not only expands our understanding across diverse polymers but also offers a valuable tool for designing environmentally friendly polymers.

Materials designed to degrade: structure, properties, processing, and performance relationships in polyhydroxyalkanoate biopolymers

Conventional plastics pose significant environmental and health risks across their life cycle, driving intense interest in sustainable alternatives. Among these, polyhydroxyalkanoates (PHAs) stand out for their biocompatibility, degradation characteristics, and diverse applications. Yet, challenges like production cost, scalability, and limited chemical variety hinder their widespread adoption, impacting material selection and design. This review examines PHA research through the lens of the classical materials tetrahedron, exploring property-structure-processing-performance (PSPP) relationships. By analyzing recent literature and addressing current limitations, we gain valuable insights into PHA development. Despite challenges, we remain optimistic about the role of PHAs in transitioning towards a circular plastic economy, emphasizing the need for further research to unlock their full potential.

Polymer material biodegradation in the deep sea. A review

The phenomenon of marine plastic pollution is now well-established, with documented impacts on marine biodiversity and biogeochemical cycles. In order to mitigate this environmental impact, a significant amount of research has been conducted in recent years with the objective of developing biodegradable alternatives to conventional polymers and their composites in marine environments. The findings of this research significantly enhanced our understanding of biodegradation mechanisms and identified promising candidates. However, the majority of these studies have been conducted in coastal marine environments, which represent a minor component of the marine ecosystem. Recent models on the transport of plastic debris in the oceans indicate that deep-sea environments are likely to be the ultimate sink for a significant proportion of plastics entering the oceans. The aim of this review is to provide an overview of the processes of biodegradation of polymers in these deep-sea environments. The diversity and specific characteristics of these environments with respect to degradation mechanisms are discussed. While the majority of deep-sea conditions are not conducive to biodegradation, studies on organic falls (wood and whale carcasses) and a few investigations into materials previously shown to be biodegradable in coastal marine environments demonstrate mechanisms that are similar to those observed in shallow waters. Nevertheless, further research is necessary to reach definitive conclusions. It is essential to extend these studies to a broader range of deep-sea environments. Additionally, new methodologies that integrate microbiology and polymer science are required to accurately assess the process of assimilation of these materials in these environments.

Analytical tools to assess polymer biodegradation: A critical review and recommendations

Many petroleum-derived plastic materials are highly recalcitrant and persistent in the environment, posing significant threats to human and ecological receptors due to their accumulation in ecosystems. In recent years, research efforts have focused on advancing biological methods for polymer degradation. Enzymatic depolymerization has emerged as particularly relevant for biobased plastic recycling, potentially scalable for industrial use. Biodegradation involves adsorption to the plastic solid surface, followed by an interfacial reaction, resulting in cleavage of bonds of polymer chains exposed on the surface. Here, widely varying substrate-specific kinetics are observed, with the polymer's properties possessing a significant impact on the rate of this interfacial catalysis. Thus, there is a critical need for sensitive and accurate characterization of the material surface during and after interfacial depolymerization to fully understand the reaction mechanisms. Here, we provide a critical review of a range of techniques used in the analysis of material surfaces to characterize the chemical, topological, and morphological features relevant to the study of enzymatic biocatalysis, including microscopy techniques, spectroscopic techniques (e.g., X-ray diffraction analysis, Fourier transform infrared attenuated total reflectance spectroscopy, and mass spectrometry detection of analytes associated with degradation). Techniques for evaluation of surface energy and topology in their relevancy for sensitive detection of biological surface modifications are also discussed. In addition, this paper provides an overview of the strengths of these techniques and compares their performance in both sensitivity and throughput, including emerging techniques, which can be useful, particularly for the rapid analysis of the surface properties of polymeric materials in high-throughput screening of candidate biocatalysts. This research serves as a starting point in selecting and applying appropriate methodologies that provide direct evidence to the ongoing biotic degradation of polymeric materials.

Assessing the aquatic biodegradation potential of polymeric excipients for pharmaceutical formulation

Polymeric excipients (PEx) are essential in drug formulation but raise environmental concerns upon wastewater release post-administration due to their potential detrimental effects to life-histories of freshwater vertebrates and invertebrates. Ten pharmaceutical polymeric compounds were assessed in a stepwise environmental biodegradation assessment according to standard OECD 301 guidelines to thoroughly evaluate biodegradability of these compounds. Polyvinyl alcohol (PVA), polyethylene glycol (PEG), chitosan, maize starch, and sodium starch glycolate (SSG) were found to be 'readily biodegradable,' although PVA and PEG showed variation across employed test systems. PEG and PVA did not degrade in OECD 301D tests having low microbial density and diversity. In contrast, in the OECD 301F tests i.e., higher microbial density and diversity, PEG exhibited 73.0 ± 3.3 % biodegradation, while PVA showed 91.2 ± 8.0 % biodegradation with secondary effluent and activated sludge, respectively. Polyvinyl pyrrolidone (PVP), Copovidone, Kollidon CL, and Eudragit derivatives EPO and L100-55 were categorized as 'non-biodegradable' (< 10 % biodegradation). No increase in degradation was observed after 42 days. This indicates their environmental persistence. This study lays the groundwork for a comprehensive understanding of the biodegradation potential of pharmaceutical polymers. It considers the influence of test conditions, inoculum sources, and compound characteristics. The environmental persistence of certain PEx underlines the urgent need to use more environmentally biodegradable alternatives in drug formulation.

Key insights into mechanism and kinetics of biodegradation of poly (3-hydroxybutyrate)-based nanocomposite films in natural soil and river water environments

The biodegradability of poly (3-hydroxybutyrate) (PHB)-based food packaging material PHB/5GS/0.7MgO, developed by incorporating 5 wt% grapeseed oil (GS) and 0.7 wt% MgO nanoparticles using solution casting route, was investigated in soil and river water environments. For comparison, the biodegradability of neat PHB films and PHB-based films loaded only with 5 wt% GS (PHB/5GS) was also studied. Remarkably, all PHB-based films showed 100 % weight loss in soil within 25 days. In contrast, the weight loss of PHB, PHB/5GS, and PHB/5GS/MgO films in river water was 27, 24, and 20 %, respectively, in 120 days. Gradual reduction in average molecular weight and carbonyl index, alongside an increase in crystallinity, opacity, and the number of chain scissions per unit mass, was observed for various PHB-based films during their degradation in soil and river water. Overall, this study demonstrated high degradation efficiency of PHB-based food packaging material in soil than in river water.

Biodegradation of Water-Soluble Polymers by Wastewater Microorganisms: Challenging Laboratory Testing Protocols

For water-soluble polymers (WSPs) that enter environmental systems at their end-of-life, biodegradability is a key functionality. For the development and regulation of biodegradable WSPs, testing methods that are both scientifically validated and economically practicable are needed. Here, we used respirometric laboratory tests to study the biodegradation of poly(amino acids), poly(ethylene glycol), and poly(vinyl alcohol), together with appropriate low-molecular-weight reference substrates. We varied key protocol steps of commonly used testing methods, which were originally established for small molecules and tested for effects on WSP biodegradation. We found that avoiding aeration of the wastewater inoculate prior to WSP addition, incubating WSP with filter-sterilized wastewater prior to biodegradation testing, and lowering the WSP concentration can increase biodegradation rates of WSPs. Combining the above-mentioned protocol variations substantially affected the results of the biodegradation testing for the two poly(amino acids) tested herein (i.e., poly(lysine) and poly(aspartic acid)). Our findings were consistent between microbial inocula derived from two municipal wastewater treatment plants. Our study presents promising biodegradation dynamics for poly(amino acids) and highlights the importance, strengths, and limitations of respirometric laboratory methods for WSP biodegradation testing.

Polyhydroxybutyrate Plastics Show Rapid Disintegration and More Straightforward Biogeochemical Impacts than Polyethylene under Marine Biofragmentation

Although massive studies have investigated the spatiotemporally occurring marine plastisphere, a new microbial ecosystem colonizing the surfaces of plastics, the resulting biofragmentation process and impacts of plastics on biogeochemical cycles remain largely unknown. Here, we leverage synchrotron-based Fourier transform infrared spectromicroscopy (FTIR mapping) and metagenomic sequencing to explore independent marine microcosms amended with petroleum-based polyethylene (PE) and biobased polyhydroxybutyrate (PHB) plastic films. FTIR mapping results demonstrate unequal fragmentation scenarios by which the PE plastic rarely releases oxidized fragments while PHB disintegrates quickly, gradually forming fragments composed of extracellular polymeric substances resembling plastic films. Metagenomic analysis shows the critical role of hydrocarbonoclastic lineages in the biodegradation of the two plastics by the fatty acid degradation pathway, where the PE plastics host different microbial trajectories between the plastisphere (dominated by Alcanivorax) and surrounding seawater. In contrast, the PHB addition demonstrates decreased microbial richness and diversity, consistent community composition (dominated by Phaeobacter and Marinobacter), and apparently stimulated sulfur cycle and denitrification pathways in both the plastisphere and surrounding seawater. Our study gives scientific evidence on the marine biotic processes distinguishing petroleum- and biobased plastics, highlighting marine PHB input exerting straightforward impacts on the water phase and deserving critical management practices.

Biodegradable Alkali-Swellable Emulsion Polymers: Industrial and Commercial Thickeners

Sustainability and circularity are key issues facing the global polymer industry. The search for biodegradable and environmentally-friendly polymers that can replace conventional materials is a difficult challenge that has been met with limited success. Alternatives must be cost-effective, scalable, and provide equivalent performance. We report that latexes made by the conventional emulsion polymerization of vinyl acetate and functional vinyl ester monomers are efficient thickeners for consumer products and biodegrade in wastewater. This approach uses readily-available starting materials and polymerization is carried out in water at room temperature, in one pot, and generates negligible waste. Moreover, the knowledge that poly(vinyl ester)s are biodegradable will lead to the design of new green polymer materials.

Advances in microbial exoenzymes bioengineering for improvement of bioplastics degradation

Plastic pollution has become a major global concern, posing numerous challenges for the environment and wildlife. Most conventional ways of plastics degradation are inefficient and cause great damage to ecosystems. The development of biodegradable plastics offers a promising solution for waste management. These plastics are designed to break down under various conditions, opening up new possibilities to mitigate the negative impact of traditional plastics. Microbes, including bacteria and fungi, play a crucial role in the degradation of bioplastics by producing and secreting extracellular enzymes, such as cutinase, lipases, and proteases. However, these microbial enzymes are sensitive to extreme environmental conditions, such as temperature and acidity, affecting their functions and stability. To address these challenges, scientists have employed protein engineering and immobilization techniques to enhance enzyme stability and predict protein structures. Strategies such as improving enzyme and substrate interaction, increasing enzyme thermostability, reinforcing the bonding between the active site of the enzyme and substrate, and refining enzyme activity are being utilized to boost enzyme immobilization and functionality. Recently, bioengineering through gene cloning and expression in potential microorganisms, has revolutionized the biodegradation of bioplastics. This review aimed to discuss the most recent protein engineering strategies for modifying bioplastic-degrading enzymes in terms of stability and functionality, including enzyme thermostability enhancement, reinforcing the substrate binding to the enzyme active site, refining with other enzymes, and improvement of enzyme surface and substrate action. Additionally, discovered bioplastic-degrading exoenzymes by metagenomics techniques were emphasized.

Novel insight into the aging process of microplastics: An in-situ study in coastal wetlands

Coastal wetlands, the critical interface between the terrestrial and marine environments, provide a dynamic and unique environment for the aging of microplastics (MPs). Nevertheless, both abiotic and biotic processes that contribute to the aging of MPs in coastal wetlands have been largely neglected. In this study, the aging of MPs was continuously characterized in Hangzhou Bay, a representative coastal wetland in Zhejiang, China. Three-month exposure of polymers in sediment-water interface induced the aging phenomenon with embrittlement and exfoliation, as evidenced by simultaneous observed alternations in crystallinity and functional groups. A first-order kinetic model was fitted to describe the rate and degree of aging quantitatively. As evidenced by the carbonyl index, the residence time of all the examined MPs exhibited significant variance, ranging from 335 to 661 days. These variations might be caused by the selective attachment of plastic-degrading microorganisms (such as Moraxella sp. and Rhodococcus sp.). A positive correlation between the carbonyl index, the number of OTUs in the MP-associated biofilm, and irradiation was observed (p < 0.001), suggesting that the aging process may be co-regulated by natural sunlight and wetland microbial colonization. This study sheds new light on the long-term environmental fate of MPs and their associated ecological risks.

Assessment of biodegradation of lignocellulosic fiber-based composites - A systematic review

Lignocellulosic fiber-reinforced polymer composites are the most extensively used modern-day materials with low density and better specific strength specifically developed to render better physical, mechanical, and thermal properties. Synthetic fiber-reinforced composites face some serious issues like low biodegradability, non-environmentally friendly, and low disposability. Lignocellulosic or natural fiber-reinforced composites, which are developed from various plant-based fibers and animal-based fibers are considered potential substitutes for synthetic fiber composites because they are characterized by lightweight, better biodegradability, and are available at low cost. It is very much essential to study end-of-life (EoL) conditions like biodegradability for the biocomposites which occur commonly after their service life. During biodegradation, the physicochemical arrangement of the natural fibers, the environmental conditions, and the microbial populations, to which the natural fiber composites are exposed, play the most influential factors. The current review focuses on a comprehensive discussion of the standards and assessment methods of biodegradation in aerobic and anaerobic conditions on a laboratory scale. This review is expected to serve the materialists and technologists who work on the EoL behaviour of various materials, particularly in natural fiber-reinforced polymer composites to apply these standards and test methods to various classes of biocomposites for developing sustainable materials.

Designing biodegradable alternatives to commodity polymers

The development and widespread adoption of commodity polymers changed societal landscapes on a global scale. Without the everyday materials used in packaging, textiles, construction and medicine, our lives would be unrecognisable. Through decades of use, however, the environmental impact of waste plastics has become grimly apparent, leading to sustained pressure from environmentalists, consumers and scientists to deliver replacement materials. The need to reduce the environmental impact of commodity polymers is beyond question, yet the reality of replacing these ubiquitous materials with sustainable alternatives is complex. In this tutorial review, we will explore the concepts of sustainable design and biodegradability, as applied to the design of synthetic polymers intended for use at scale. We will provide an overview of the potential biodegradation pathways available to polymers in different environments, and highlight the importance of considering these pathways when designing new materials. We will identify gaps in our collective understanding of the production, use and fate of biodegradable polymers: from identifying appropriate feedstock materials, to considering changes needed to production and recycling practices, and to improving our understanding of the environmental fate of the materials we produce. We will discuss the current standard methods for the determination of biodegradability, where lengthy experimental timescales often frustrate the development of new materials, and highlight the need to develop better tools and models to assess the degradation rate of polymers in different environments.

Insights into the mechanisms involved in the fungal degradation of plastics

Fungi are considered among the most efficient microbial degraders of plastics, as they produce salient enzymes and can survive on recalcitrant compounds with limited nutrients. In recent years, studies have reported numerous species of fungi that can degrade different types of plastics, yet there remain many gaps in our understanding of the processes involved in biodegradation. In addition, many unknowns need to be resolved regarding the fungal enzymes responsible for plastic fragmentation and the regulatory mechanisms which fungi use to hydrolyse, assimilate and mineralize synthetic plastics. This review aims to detail the main methods used in plastic hydrolysis by fungi, key enzymatic and molecular mechanisms, chemical agents that enhance the enzymatic breakdown of plastics, and viable industrial applications. Considering that polymers such as lignin, bioplastics, phenolics, and other petroleum-based compounds exhibit closely related characteristics in terms of hydrophobicity and structure, and are degraded by similar fungal enzymes as plastics, we have reasoned that genes that have been reported to regulate the biodegradation of these compounds or their homologs could equally be involved in the regulation of plastic degrading enzymes in fungi. Thus, this review highlights and provides insight into some of the most likely regulatory mechanisms by which fungi degrade plastics, target enzymes, genes, and transcription factors involved in the process, as well as key limitations to industrial upscaling of plastic biodegradation and biological approaches that can be employed to overcome these challenges.

Biodegradation of Plastics Induced by Marine Organisms: Future Perspectives for Bioremediation Approaches

Plastic pollution is a distinctive element of the globalized world. In fact, since the 1970s the expansion and use of plastics, particularly in the consumer and commercial sectors, has given this material a permanent place in our lives. The increasing use of plastic products and the wrong management of end-of-life plastic products have contributed to increasing environmental pollution, with negative impacts on our ecosystems and the ecological functions of natural habitats. Nowadays, plastic pollution is pervasive in all environmental compartments. As aquatic environments are the dumping points for poorly managed plastics, biofouling and biodegradation have been proposed as promising approaches for plastic bioremediation. Known for the high stability of plastics in the marine environment, this represents a very important issue to preserve marine biodiversity. In this review, we have summarized the main cases reported in the literature on the degradation of plastics by bacteria, fungi, and microalgae and the degradation mechanisms involved, to highlight the potential of bioremediation approaches to reduce macro and microplastic pollution.

High-throughput experimentation for discovery of biodegradable polyesters

The consistent rise of plastic pollution has stimulated interest in the development of biodegradable plastics. However, the study of polymer biodegradation has historically been limited to a small number of polymers due to costly and slow standard methods for measuring degradation, slowing new material innovation. High-throughput polymer synthesis and a high-throughput polymer biodegradation method are developed and applied to generate a biodegradation dataset for 642 chemically distinct polyesters and polycarbonates. The biodegradation assay was based on the clear-zone technique, using automation to optically observe the degradation of suspended polymer particles under the action of a single Pseudomonas lemoignei bacterial colony. Biodegradability was found to depend strongly on aliphatic repeat unit length, with chains less than 15 carbons and short side chains improving biodegradability. Aromatic backbone groups were generally detrimental to biodegradability; however, ortho- and para-substituted benzene rings in the backbone were more likely to be degradable than metasubstituted rings. Additionally, backbone ether groups improved biodegradability. While other heteroatoms did not show a clear improvement in biodegradability, they did demonstrate increases in biodegradation rates. Machine learning (ML) models were leveraged to predict biodegradability on this large dataset with accuracies over 82% using only chemical structure descriptors.

Chemical recycling technologies for PVC waste and PVC-containing plastic waste: A review

The extensive production and consumption of plastics has resulted in significant plastic waste and plastic pollution. Polyvinyl chloride (PVC) waste has a high chlorine content and is the primary source of chlorine in the plastic waste stream, potentially generating hazardous chlorinated organic pollutants if treated improperly. This review discusses PVC synthesis, applications, and the current types and challenges of PVC waste management. Dechlorination is vital for the chemical recycling of PVC waste and PVC-containing plastic waste. We review dehydrochlorination and dechlorination mechanisms of PVC using thermal degradation and wet treatments, and summarize the recent progress in chemical treatments and dechlorination principles. This review provides readers with a comprehensive analysis of chemical recycling technologies for PVC waste and PVC-containing plastic waste to transform them into chemicals, fuels, feedstock, and value-added polymers.

Redesigning Carbon-Carbon Backbone Polymers for Biodegradability-Compostability at the End-of-Life Stage

Carbon-carbon backbone polymers are non-biodegradable, persistent plastics that have accumulated on land and oceans due to human activities. They degrade and fragment into microplastics and smaller particle sizes but do not biodegrade at an acceptable and practical rate. Their continual buildup in the natural environment precipitates serious detrimental impacts on human health and the environment, as extensively documented in the literature and media. Nearly 77% of global plastics produced are carbon-carbon backbone polymers. More importantly, 90% of packaging plastics (153.8 million metric tons) are non-biodegradable, persistent carbon-carbon backbone polymers. The recycling rate of these non-durable packaging plastics ranges from 0 to 4%. Re-designing carbon-carbon backbone polymers to labile ester backbone biodegradable-compostable polymers and treating them along with biodegradable organic waste (such as food, paper, and organic wastes) in managed industrial composting is environmentally responsible. Diverting 1 million metric tons of biodegradable organic wastes in MSW bound for landfills and open dumps to industrial composting results in 0.95 million metric tons CO₂ equivalents of GHG emissions reduction. This perspective paper discusses strategies and rationales regarding the redesign of carbon-carbon backbone polymer molecules. It describes the carbon footprint reductions achievable by replacing petro-fossil carbon with plant biomass carbon. Biodegradability and compostability are frequently used but misunderstood and misused terms, leading to misleading claims in the marketplace. This paper presents the fundamentals of biodegradability and compostability of plastics and the requirements to be met according to ASTM/ISO international standards.

Water-Soluble Synthetic Polymers: Their Environmental Emission Relevant Usage, Transport and Transformation, Persistence, and Toxicity

Water-soluble synthetic polymers (WSPs) are distinct from insoluble plastic particles, which are both critical components of synthetic polymers. In the history of human-made macromolecules, WSPs have consistently portrayed a crucial role and served as the ingredients of a variety of products (e.g., flocculants, thickeners, solubilizers, surfactants, etc.) commonly used in human society. However, the environmental exposures and risks of WSPs with different functions remain poorly understood. This paper provides a critical review of the usage, environmental fate, environmental persistence, and biological consequences of multiple types of WSPs in commercial and industrial production. Investigations have identified a wide market of applications and potential environmental threats of various types of WSPs, but we still lack the suitable assessment tools. The effects of physicochemical properties and environmental factors on the environmental distribution as well as the transport and transformation of WSPs are further summarized. Evidence regarding the degradation of WSPs, including mechanical, thermal, hydrolytic, photoinduced, and biological degradation is summarized, and their environmental persistence is discussed. The toxicity data show that some WSPs can cause adverse effects on aquatic species and microbial communities through intrinsic toxicity and physical hazards. This review may serve as a guide for environmental risk assessment to help develop a sustainable path for WSP management.

Sustainable Design of Structural and Functional Polymers for a Circular Economy

To achieve a sustainable circular economy, polymer production must start transitioning to recycled and biobased feedstock and accomplish CO₂ emission neutrality. This is not only true for structural polymers, such as in packaging or engineering applications, but also for functional polymers in liquid formulations, such as adhesives, lubricants, thickeners or dispersants. At their end of life, polymers must be either collected and recycled via a technical pathway, or be biodegradable if they are not collectable. Advances in polymer chemistry and applications, aided by computational material science, open the way to addressing these issues comprehensively by designing for recyclability and biodegradability. This Review explores how scientific progress, together with emerging regulatory frameworks, societal expectations and economic boundary conditions, paint pathways for the transformation towards a circular economy of polymers.

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

Critical effect of biodegradation on long-term microplastic weathering in sediment environments: A systematic review

Microplastic (MP) pollution in global sediment has been intensely studied and recognized as the ultimate sink for residual MPs in terrestrial and aquatic ecosystems. During MP long-term retention in sediments, plastic-degrading bacteria (i.e., Flavobacteriaceae, Bacillus, Rhodobacteraceae, and Desulfobacteraceae) can utilize those MPs as their carbon and energy sources through enzyme (hydrolase and oxidoreductase) reactions, which further alter or transform high molecular weight MP polymers into lower molecular weight biodegradation byproducts (i.e., monomers and oligomers) and release toxic additives. In other words, MPs can act as durable substrates for plastic-degrading bacteria in sediments. However, to date, the biodegradation rates of MPs in sediment environments are still poorly understood due to their limited degradation efficiency. Herein, we review the enzyme-induced biodegradation processes of MPs in sediment environments, which is important for accessing the alteration of MP properties and their potential ecological risks after undergoing long-term weathering processes. In addition, the factors associated with the MP properties (polymer type, molecular weight, crystallinity, and hydrophobicity) and sediment conditions (sediment type, temperature, pH, salinity, and oxygen content) that influence plastic degradation processes are also reviewed. The mechanisms may relate to the MP properties and sediment conditions that can influence microbial abundance, enzyme concentrations, and enzyme activities, thus altering MP biodegradation ratios. We anticipate that the observations reviewed in this study will pose a new issue to better understand the formation process, fate, and potential ecological risks associated with aged MPs in sediment environments.

Environmental Biodegradation of Water-Soluble Polymers: Key Considerations and Ways Forward

Water-soluble polymers (WSPs) have unique properties that are valuable in diverse applications ranging from home and personal care products to agricultural formulations. For applications that result in the release of WSPs into natural environments or engineered systems, such as agricultural soils and wastewater streams, biodegradable as opposed to nonbiodegradable WSPs have the advantage of breaking down and, thereby, eliminating the risk of persistence and accumulation. In this Commentary, we emphasize central steps in WSP biodegradation, discuss how these steps depend on both WSP properties and characteristics of the receiving environment, and highlight critical requirements for testing WSP biodegradability.

Wastewater treatment plants act as essential sources of microplastic formation in aquatic environments: A critical review

According to extensive in situ investigations, the microplastics (MPs) determined in current wastewater treatment plants (WWTPs) are mostly aged, with roughened surfaces and varied types of oxygen-containing functional groups (i.e., carbonyl and hydroxyl). However, the formation mechanism of aged MPs in WWTPs is still unclear. This paper systematically reviewed MP fragmentation and generation mechanisms in WWTPs at different treatment stages. The results highlight that MPs are prone to undergo physical abrasion, biofouling, and chemical oxidation-associated weathering in WWTPs at different treatment stages and can be further decomposed into smaller secondary MPs, including in nanoplastics (less than 1000 nm or 100 nm in size), suggesting that WWTPs can act as a formation source for MPs in aquatic environments. Sand associated mechanical crashes in the primary stage, microbes in active sewage sludge-related biodegradation in the secondary stage, and oxidant-relevant chemical oxidation processes (light photons, Cl₂, and O₃) in the tertiary stage are the dominant causes of MP formation in WWTPs. For MP formation mechanisms in WWTPs, external environmental forces (shear and stress forces, UV radiation, and biodegradation) can first induce plastic chain scission, destroy the plastic molecular arrangement, and create abundant pores and cracks on the MP surface. Then, the physicochemical properties (modulus of elasticity, tensile strength and elongation at break) of MPs shift consequently and finally breakdown into smaller secondary MPs or nanoscale plastics. Overall, this review provides new insights to better understand the formation mechanism, occurrence, fate, and adverse effects of aged microplastics/nanoplastics in current WWTPs.

Biodegradability as an Off-Ramp for the Circular Economy: Investigations into Biodegradable Polymers for Home and Personal Care

ConspectusConsumer pressure for globe-conscious products is pushing brand-owners big and small to provide transparency on the origin and fate of their ingredients. One such market where sustainable product growth has outpaced market growth is in home and personal care. Products in this space clean or care for our bodies, our homes, our environments, and the materials we encounter every day. Many of these materials are used and then washed down the drain, making the fate of these products a tangible end point for the consumer. Life cycle assessment (LCA) is a well-established methodology for determining potential environmental impacts of products and can be used to quantify the overall carbon footprint of the raw materials, the process to manufacture, and the transportation of the product around the globe. LCAs are calibrated to one metric, often kilograms of carbon dioxide (CO₂) equivalents, to capture the overall carbon footprint. One aspect notably absent from many LCAs is the end of life for the product. Interestingly, consumers are driving a push for biodegradable materials that would not persist in the environment, but as materials biodegrade, they release carbon dioxide to the atmosphere. This release of CO₂ places the benefits of biodegradation on the ultimate fate of raw materials in contradiction with carbon reduction methods such as carbon capture and carbon recycling that improve the LCA of a given product. In this Account, we describe the impact of biodegradation on the circular economy and discuss the development of natural, modified natural, and synthetic polymers to provide biodegradable alternatives to less degradable materials in the home and personal care markets. Building a chemical toolbox which can meet the functional and economical requirements of products on the market today while improving their sustainability profile is a huge challenge, which will not have a single answer. Among many current internal research initiatives, one vignette will be highlighted to showcase the research on a synthetic polymer with improved biodegradability for the dish care market. This novel polyelectrolyte, a copolymer of itaconic acid, acrylic acid, and vinyl acetate, was designed to break down into digestible daughter products in a wastewater treatment plant while demonstrating stability both on the shelf and in the dishwasher.

Synthesis and Biodegradation Studies of Low-Dispersity Poly(Acrylic Acid)

Poly(acrylic acid) (PAA) is produced on an industrial scale and widely-used in applications such as personal care products and cleaning formulations that end up "down-the-drain." Relatively high molecular weight PAA is considered poorly biodegradable, but little is known about the biodegradability of low molecular weight PAA at the wastewater treatment plant according to current regulatory and industrial OECD standards. We report the synthesis, separation, and characterization of a series of ultralow dispersity PAA oligomers (i.e., Đ <1.10) in the molecular weight range M_n ∼ 350-1200 Da and the results of biodegradability testing. Miniaturized, high-throughput screening studies in a parallel respirometer revealed a strong trend towards lower biodegradation at higher molecular weight; these results were confirmed and expanded using standardized method OECD 301F. Biodegradability reached ∼40% at M_n = 380 Da, ∼26% at M_n = 770 Da, and ∼17% at M_n = 1190 Da for discrete polyacid oligomers. These data not only shed light on potential biodegradation mechanisms for linear PAA, but also may inspire the future design of biodegradable PAA-containing macromolecules. This article is protected by copyright. All rights reserved.