Suspect Screening and Nontargeted Analysis of Per- and Polyfluoroalkyl Substances in a Lake Ontario Food Web

Utilization of Negative Chemical Ionization to Expand Nontargeted Screening of Halogenated Organics in Great Lakes Top Predator Fish

Nontargeted screening (NTS) of halogenated contaminants in biota is part of the routine monitoring of the Great Lakes ecosystem. NTS can give insight into new chemicals with possible persistent, bioaccumulative, and toxic (PBT) properties and help quantify known PBT's degradation and transformation products. The most common ionization technique for NTS is electron impact ionization (EI) due to the consistent and easily standardized fragmentation patterns. This research uses electron capture negative ionization (ECNI) as a complementary technique to broaden the range of halogenated contaminants detected in the Great Lakes. ECNI has higher sensitivity and selectivity to halogenated compounds compared to EI. GC × GC-HR-ToF MS with a multimode ion source (MMS) offers consecutive runs in EI and ECNI modes using the same chromatographic setup, facilitating retention time alignment. The exact mass measurements help in identifying compounds found only in ECNI. A total of 85 novel halogenated features were detected, 78% of which were detected only in ECNI. Only 9% of the features were detected in both modes, indicating that ECNI is a necessary complementary technique for NTS of halogenated features.

A systematic review for non-targeted analysis of per- and polyfluoroalkyl substances (PFAS)

This review follows the PRISMA guidelines to provide a systematic review of 115 peer reviewed articles that used non-targeted analysis (NTA) methods to detect per- and polyfluoroalkylated substances (PFAS). This literature highlights the significant positive impact of NTA in understanding PFAS in the environment. Within the literature a geographical bias exists, with most NTA studies (∼60 %) conducted in the United States and China. Future studies in other regions (such as South America and Africa) are needed to gain a more global understanding. More research is required in marine environments and the atmosphere, as current studies focus mainly on freshwater, groundwater, soil, and sediments. The majority of studies focus on measuring PFAS in the environment, rather than in commercial products (with the exception of AFFF). Non-lethal blood sampling has been successful for NTA in humans and wildlife, but additional biomonitoring studies are required on exposed cohorts to understand health risks and PFAS biotransformation pathways. NTA methods mostly use liquid chromatography and negative ionisation, which biases the literature towards the detection of specific PFAS. Despite improvements in data reporting and quality assurance and control (QA/QC) procedures, factors such as false negative and false positive rates are often overlooked, and many NTA workflows remain highly subjective. Perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonic acids (PFSAs) are the most detected PFAS classes, identified in over 80 % of NTA studies, and are common in routine monitoring. However, our review identified >1000 PFAS from a total of 382 different PFAS classes, with over 300 classes found in fewer than 5 % of studies. This highlights the variety of different PFAS present in the environment, and the limitations of relying solely on targeted methods. Future monitoring programs and regulations would benefit from considering NTA methods to provide more comprehensive information on PFAS present in the environment.

Latest trends in the environmental analysis of PFAS including nontarget analysis and EOF-, AOF-, and TOP-based methodologies

Ubiquitous environmental occurrence of per- and polyfluoroalkyl substances (PFAS) underscores the critical need to broaden investigative efforts in effective screening, risk assessment, and remediation. Owing to the broad spectrum of PFAS, various analytical techniques have been extensively utilized to attain inclusivity, with notable attention given to methods such as extractable organic fluorine (EOF), adsorbable organic fluorine (AOF), and the total oxidizable precursor (TOP) assay. These techniques expand the scope of PFAS analysis by estimating perfluoroalkyl acid precursors or the total organochlorine fraction. This review offers a comprehensive comparative overview of up-to-date methodologies, alongside acknowledging the inherent limitations associated with their applications. When coupled with target analysis via low-resolution tandem mass spectrometry, these techniques offer a potential estimation of total PFAS concentrations. Yet, analytical challenges such as the limited availability of reference analytical standards, partial PFAS adsorption, and the entrapment of fluorinated inorganic anions on adsorbent materials often restrict the comprehensiveness of PFAS analysis. So, integrating nontarget analysis using high-resolution mass spectrometry (HRMS) tools fortifies these PFAS mass balance approaches, enabling the development of a more holistic approach for an environmental analysis framework. This review provides additional insights into the comparative advantages of PFAS analytical approaches and explores various data prioritization strategies in nontarget screening methods. It advocates for the necessary optimization of PFAS extraction methods, asserting that integrating the nontarget approach would foster the establishment of a comprehensive monitoring framework across diverse environmental matrices. Such integration holds promise for enhancing scientific comprehension of PFAS contamination across diverse environmental matrices.

Considerations and challenges in support of science and communication of fish consumption advisories for per- and polyfluoroalkyl substances

Federal, state, tribal, or local entities in the United States issue fish consumption advisories (FCAs) as guidance for safer consumption of locally caught fish containing contaminants. Fish consumption advisories have been developed for commonly detected compounds such as mercury and polychlorinated biphenyls. The existing national guidance does not specifically address the unique challenges associated with bioaccumulation and consumption risk related to per- and polyfluoroalkyl substances (PFAS). As a result, several states have derived their own PFAS-related consumption guidelines, many of which focus on one frequently detected PFAS, known as perfluorooctane sulfonic acid (PFOS). However, there can be significant variation between tissue concentrations or trigger concentrations (TCs) of PFOS that support the individual state-issued FCAs. This variation in TCs can create challenges for risk assessors and risk communicators in their efforts to protect public health. The objective of this article is to review existing challenges, knowledge gaps, and needs related to issuing PFAS-related FCAs and to provide key considerations for the development of protective fish consumption guidance. The current state of the science and variability in FCA derivation, considerations for sampling and analytical methodologies, risk management, risk communication, and policy challenges are discussed. How to best address PFAS mixtures in the development of FCAs, in risk assessment, and establishment of effect thresholds remains a major challenge, as well as a source of uncertainty and scrutiny. This includes developments better elucidating toxicity factors, exposures to PFAS mixtures, community fish consumption behaviors, and evolving technology and analytical instrumentation, methods, and the associated detection limits. Given the evolving science and public interests informing PFAS-related FCAs, continued review and revision of FCA approaches and best practices are vital. Nonetheless, consistent, widely applicable, PFAS-specific approaches informing methods, critical concentration thresholds, and priority compounds may assist practitioners in PFAS-related FCA development and possibly reduce variability between states and jurisdictions. Integr Environ Assess Manag 2024;20:1839-1858. © 2024 The Author(s). Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Assessing Per- and Polyfluoroalkyl Substances in Fish Fillet Using Non-Targeted Analyses

Per- and polyfluoroalkyl substances (PFAS) are a class of thousands of man-made chemicals that are persistent and highly stable in the environment. Fish consumption has been identified as a key route of PFAS exposure for humans. However, routine fish monitoring targets only a handful of PFAS, and non-targeted analyses have largely only evaluated fish from heavily PFAS-impacted waters. Here, we evaluated PFAS in fish fillets from recreational and drinking water sources in central North Carolina to assess whether PFAS are present in these fillets that would not be detected by conventional targeted methods. We used liquid chromatography, ion mobility spectrometry, and mass spectrometry (LC-IMS-MS) to collect full scan feature data, performed suspect screening using an in-house library of 100 PFAS for high confidence feature identification, searched for additional PFAS features using non-targeted data analyses, and quantified perfluorooctanesulfonic acid (PFOS) in the fillet samples. A total of 36 PFAS were detected in the fish fillets, including 19 that would not be detected using common targeted methods, with a minimum of 6 and a maximum of 22 in individual fish. Median fillet PFOS levels were concerningly high at 11.6 to 42.3 ppb, and no significant correlation between PFOS levels and number of PFAS per fish was observed. Future PFAS monitoring in this region should target more of these 36 PFAS, and other regions not considered heavily PFAS contaminated should consider incorporating non-targeted analyses into ongoing fish monitoring studies.

Assessing Per- and Polyfluoroalkyl Substances (PFAS) in Fish Fillet Using Non-Targeted Analyses

Per- and polyfluoroalkyl substances (PFAS) are a class of thousands of man-made chemicals that are persistent and highly stable in the environment. Fish consumption has been identified as a key route of PFAS exposure for humans. However, routine fish monitoring targets only a handful of PFAS, and non-targeted analyses have largely only evaluated fish from heavily PFAS-impacted waters. Here, we evaluated PFAS in fish fillets from recreational and drinking water sources in central North Carolina to assess whether PFAS are present in these fillets that would not be detected by conventional targeted methods. We used liquid chromatography, ion mobility spectrometry, and mass spectrometry (LC-IMS-MS) to collect full scan feature data, performed suspect screening using an in-house library of 100 PFAS for high confidence feature identification, searched for additional PFAS features using non-targeted data analyses, and quantified perfluorooctane sulfonic acid (PFOS) in the fillet samples. A total of 36 PFAS were detected in the fish fillets, including 19 that would not be detected using common targeted methods, with a minimum of 6 and a maximum of 22 in individual fish. Median fillet PFOS levels were concerningly high at 11.6 to 42.3 ppb, and no significant correlation between PFOS levels and number of PFAS per fish was observed. Future PFAS monitoring in this region should target more of these 36 PFAS, and other regions not considered heavily PFAS contaminated should consider incorporating non-targeted analyses into ongoing fish monitoring studies.

Assessment for the data processing performance of non-target screening analysis based on high-resolution mass spectrometry

Non-target screening (NTS) based on high-resolution mass spectrometry (HRMS) is considered one of the most comprehensive approaches for the characterization of contaminants of emerging concern (CECs) in a complex sample. This study evaluated the performance of NTS in aquatic environments (including peak picking, database matching, product identification, semi-quantification, etc.) based on a self-developed data processing method using 38 glucocorticoids as testing compounds. Data-dependent acquisition (DDA) and data-independent acquisition (DIA) modes were used for obtaining the MS2 information for in-house or online database matching. Results indicate that DDA and DIA mode have their own advantages and can complement each other. The quantification method based on LC-HRMS has shown the potential to provide a fast and acceptable result for testing compounds. Finally, a matrix spike analysis was carried out on 66 CECs across different usage categories in wastewater, surface water, and seawater matrix samples, together with a case study performed for characterizing the whole contaminants in a Pearl River sample, to better illustrate the application potential of NTS workflow and the credibility of NTS outcomes. This study provides a foundation for novel applications of HRMS data by NTS workflow to identify and quantify CECs in complex systems.

First determination on two kinds of microplastic-air partition coefficients of seven per- and polyfluoroalkyl substances under environmentally relative conditions: Experiment measurement and model prediction

Microplastics (MPs) in the environment are the sink and vector of organic contaminants, including per- and polyfluoroalkyl substances (PFASs). Although PFASs are low- and non-volatile compounds, they have the potential to partition and diffuse from MP into the gas phase in the environmental functions. Herein, the MP-air partition coefficient (KPA) of seven PFASs was measured using a solid-fugacity meter. The PFAS KPA values in two MPs (high-density polyethylene (HDPE) and thermoplastic polyurethane (TPU)) were determined under different times, temperatures, and relative humidities (RH), and a model was developed to predict the PFAS KPA values based on the measured data. The results showed that the KPA of PFASs increased with the prolonged partition time until 90 mins, and higher temperature and RH facilitated the distribution of PFASs in MPs into the air phase, leading to smaller KPA values. Moreover, the derived equation for predicting PFAS log KPA values was robust with 0.79 of an adjusted square of correlation coefficient (R2adjusted = 0.79) and 0.35 of root mean squared error (RMSE = 0.35). These findings provided the first knowledge for understanding the partition behavior and fate of PFASs in the MP-air microenvironment.

Analytical approaches for screening of per- and poly fluoroalkyl substances in food items: A review of recent advances and improvements

Per and polyfluoroalkyl substances (PFAS) are a group of man-made chemicals characterized by their ubiquitous nature in all environmental compartments which makes them of increasing concern due to their persistence, bioaccumulation, and toxicity (PBT). Several instrumental methodologies and separation techniques have been identified in the literature for the detection and quantification of PFAS in environmental samples. In this review, we have identified and compared common separation techniques adopted for the extraction of PFAS in food items, and analytical methodologies for identification and quantification of PFAS in food items of plant and animal origin, highlighting recent advances in tandem techniques for the high selectivity and separation of PFAS related compounds as well as knowledge gaps and research needs on current analytical methodologies.

Target and untargeted screening of perfluoroalkyl substances in biota using liquid chromatography coupled to quadrupole time of flight mass spectrometry

Perfluoroalkyl substances (PFAS) are known to bioaccumulate and trigger adverse effects in marine birds. This study develops an extraction and analytical methodology for the target/untargeted analysis of PFAS in eggs of Yellow-legged gull (Larus michahellis) and Audouin's gull (Larus audouinii) and blood of Greater flamingo (Phoenicopterus roseus), which are used as bioindicators of organic chemical pollution. Samples were extracted by ultrasonication with acetonitrile and cleaned-up with activated carbon, and analysis was performed by ultra-high-performance liquid chromatography coupled to a quadrupole-time of flight mass spectrometer (UHPLC-Q-TOF) with negative electrospray ionization. Data-independent acquisition (DIA) was performed through full-scan acquisition to obtain MS1 at 6 eV and MS2 at 30 eV. In a first step, quantitative analysis of 25 PFAS was performed using 9 mass-labelled internal standard PFAS and quality parameters of the method developed are provided. Then, an untargeted screening workflow is proposed using the high-resolution PFAS library database from NORMAN to identify new chemicals through accurate mass measurement of MS1 and MS2 signals. The method permitted to detect several PFAS at concentrations ranging from 0.45 to 55.2 ng/g wet weight in gull eggs and from 0.75 to 125 ng/mL wet weight in flamingos' blood, with PFOS, PFOA, PFNA, PFUdA, PFTrDA, PFDoA, PFHxS and PFHpA the main compounds detected. In addition, perfluoro-p-ethylcyclohexylsulfonic acid (PFECHS, CAS number 646-83-3) and 2-(perfluorohexyl)ethanol (6:2 FTOH, CAS number 647-42-7) were tentatively identified. The developed UHPLC-Q-TOF target/untargeted analytical approach increases the scope of PFAS analysis, enabling a better assessment on contaminant exposure and promoting the use of bird species as bioindicators of chemical pollution.