Sustainable Conversion of Harmful Algae Biomass into a CO2 Reduction Electrocatalyst for Two-Fold Carbon Utilization

Unlocking phosphorus recovery from microalgae biomass: The enhanced transformation and release of phosphorus species

The intertwined challenges of harmful algae blooms and the phosphorus (P) resource crisis have necessitated the recovery of P from algae biomass. For the first time, a co-pyrolysis strategy that incorporates NaHCO3 into the pyrolysis process of chlorella to efficiently recover P in the form of vivianite was proposed. The findings demonstrated that the addition of 20 wt.% NaHCO3 during pyrolysis significantly enhanced P extraction from biochar, increasing the extraction efficiency from 2.8 % to 94.37 %. A complementary array of techniques including chemical extraction, nuclear magnetic resonance (NMR) spectroscopy, Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD), as well as two-dimensional correlation spectroscopy (2D-COS), was employed to elucidate the transformation of hard-to-extract P in chlorella to easy-to-extract P during pyrolysis. It was observed that organophosphorus (OP), pyrophosphate (pyro-P), and polyphosphates (poly-P) reacted with NaHCO3 at 700 °C, undergoing depolymerization and hydrolysis, which led to the formation of orthophosphate (ortho-P) species (e.g., Na3PO4, NaCa(PO4)3, (Fe2(PO4)3), accounting for 98.88 % of the P species in biochar product. High-purity vivianite (∼98.13 %) was subsequently obtained without the need for impurity removal, as indicated by chemical equilibrium simulations, due to the minimal ions and dissolved organic matter (DOM) present in the leaching solution, a consequence of the simple and pure structure of microalgae biomass. The estimated economic profit of this strategy is $1.51 per kilogram of dry chlorella. Additionally, the resulting biochar exhibited a high surface area (518.40 m2/g) and a well-developed pore structure, make it a promising material for adsorption and catalytic applications. This study provides a novel perspective for addressing the P crisis while effectively mitigating harmful algal blooms.

Enhanced microbial electrosynthesis performance with 3-D algal electrodes under high CO2 sparging: Superior biofilm stability and biocathode-plankton interactions

Microbial electrosynthesis (MES) shows great promise for converting CO2 into high-value chemicals. However, cathode biofilm erosion by high CO2 sparging and the unclear role of plankton in MES hinders the continuous improvement of its performance. This study aims to enhance biofilm resistance and improve interactions between bio-cathode and plankton by upgrading waste algal biomass into 3-D porous algal electrode (PAE) with rough surface. Results showed that the acetate synthesis of PAE under 20 mL/min CO2 sparging (PAE-20) was up to 3330.61 mol/m3, 4.63 times that of carbon felt under the same conditions (CF-20). The microbial loading of PAE-20 biofilm was twice that of CF-20. Furthermore, higher cumulative abundance of functional microorganisms was observed in plankton of PAE-20 (55 %), compared to plankton of CF-20 (14 %), and enhanced biocathode-plankton interactions significantly suppressed acetate consumption. Thus, this efficient and sustainable 3-D electrode advances MES technology and offers new perspectives for waste biomass recycling.

Unveiling key impact parameters and mechanistic insights towards activated biochar performance for carbon dioxide reduction

Chemically activated biochar is effective in supercapacitors and water splitting, but low conductivity hinders its application as a carbon support in carbon dioxide reduction reaction (CO2RR). Based on the observed CO2RR performance from potassium hydroxide (KOH)-activated biochar, increased microporosity was hypothesized to enhance the performance, leading to selection of potassium carbonate (K2CO3) for activation. K2CO3 activation at 600℃ increased microporosity significantly, yielding a total Faradaic efficiency of 72%, compared to 60% with KOH at 800℃. Further refinement of thermal ramping rate enriched micropore content, directly boosting FEC to 82%. Additionally, K2CO3's lower activation temperature could preserve hydroxyl groups to improve ethylene selectivity. These findings demonstrate that optimizing microporosity and surface chemistry is critical for designing activated biochar-based CO2RR electrocatalysts. Despite lower electrical conductivity of activated biochar, selecting the appropriate activating agents and conditions can make it a viable alternative to carbon black-based electrocatalysts.

Hydrochar from Pine Needles as a Green Alternative for Catalytic Electrodes in Energy Applications

Hydrothermal carbonization (HTC) serves as a sustainable method to transform pine needle waste into nitrogen-doped (N-doped) hydrochars. The primary focus is on evaluating these hydrochars as catalytic electrodes for the oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR), which are pivotal processes with significant environmental implications. Hydrochars were synthesized by varying the parameters such as nitrogen loading, temperature, and residence time. These materials were then thoroughly characterized using diverse analytical techniques, including elemental analysis, density measurements, BET surface area analysis, and spectroscopies like Raman, FTIR, and XPS, along with optical and scanning electron microscopies. The subsequent electrochemical assessment involved preparing electrocatalytic inks by combining hydrochars with an anion exchange ionomer (AEI) to leverage their synergistic effects. To the best of our knowledge, there are no previous reports on catalytic electrodes that simultaneously incorporate both a hydrochar and AEI. Evaluation metrics such as current densities, onset and half-wave potentials, and Koutecky-Levich and Tafel plots provided insights into their electrocatalytic performances. Notably, hydrochars synthesized at 230 °C exhibited an onset potential of 0.92 V vs. RHE, marking the highest reported value for a hydrochar. They also facilitated the exchange of four electrons at 0.26 V vs. RHE in the ORR. Additionally, the CO2RR yielded valuable C2 products like acetaldehyde and acetate. These findings highlight the remarkable electrocatalytic activity of the optimized hydrochars, which could be attributed, at least in part, to their optimal porosity.

Microalgae Film-Derived Water Evaporation-Induced Electricity Generator with Negative Carbon Emission

Water evaporation-induced electricity generators (WEGs) are regarded as one of the most promising solutions for addressing the increasingly severe environmental pollution and energy crisis. Owing to the potential carbon emission in the preparation process of WEGs, whether WEG represents a clean electricity generation technology is open to question. Here, a brand-new strategy is proposed for manufacturing negative carbon emission WEG (CWEG). In this strategy, the microalgae film is used as the electricity generation interface of WEG, which achieves a stable open-circuit voltage (Voc) of 0.25 V and a short-circuit current (Isc) of 3.3 µA. Since microalgae can capture carbon dioxide during its growing process, CWEG holds great promise to generate electricity without carbon emissions in the full life cycle compared with other WEGs. To the best of the author's knowledge, this is the first work using microalgae films to fabricate WEG. Therefore, it is believed that this work not only provides a new direction for designing high-efficiency and eco-friendly WEG but also offers an innovative approach to the resource utilization of microalgae.

Coupling harmful algae derived nitrogen and sulfur co-doped carbon nanosheets with CeO2 to enhance the photocatalytic degradation of isothiazolinone biocide

Removing the algae from water bodies is an effective treatment toward the worldwide frequently occurred harmful algae blooms (HAB), but processing the salvaged algae waste without secondary pollution places another burden on the economy and environment. Herein, a green hydrothermal process without any chemical addition was developed to resource the HAB algae (Microcystis sp.) into autogenous nitrogen and sulfur co-doped carbon nanosheet materials C-CNS and W-CNS, whose alga precursors were collected from pure culture and a wild bloom pond, respectively. After coupling with CeO2, the obtained optimal C-CNS/CeO2 and W-CNS/CeO2 composites photocatalytically degraded 95.4% and 88.2% of the marine pollutant 4,5-Dichloro-2-n-octyl-4-isothiazolin-3-one (DCOIT) in 90 min, significantly higher than that of pure CeO2 (63.15%). DCOIT degradation on CNS/CeO2 was further conducted under different conditions, including pH value, coexisting cations and anions, and artificial seawater. Although different influences were observed, the removal efficiencies were all above 76%. Along with the ascertained good stability and reusability in five consecutive runs, the great potential of CNS/CeO2 for practical application was validated. UV-vis DRS showed the increased light absorption of CNS/CeO2 in comparison to pure CeO2. PL spectra and photoelectrochemical measurements suggested the lowered charge transfer resistance and thereby inhibited charge recombination of CNS/CeO2. Meanwhile, trapping experiments and electron paramagnetic resonance (EPR) detection verified the primary roles of hydroxyl radical (OH) and superoxide radical (O2-) in DCOIT degradation, as well as their notably augmented generation by CNS. Consequently, a mechanism of CNS enhanced photocatalytic degradation of DCOIT was proposed. The intermediates involved in the reaction were identified by LC-QTOF-MS, giving rise to a deduced degradation pathway for DCOIT. This study offers a new approach for resourceful utilization of the notorious HAB algae waste. Besides that, photocatalytic degradation has been explored as an effective measure to remove DCOIT from the ocean.