Competitive Coadsorption Dynamics of Viruses and Dissolved Organic Matter to Positively Charged Sorbent Surfaces

Influence of suspended particles and dissolved organic matters on virus enrichment in reclaimed water by two-step tangential flow ultrafiltration: Phenomena and mechanisms

Enteric virus concentration in large-volume water samples is crucial for detection and essential for assessing water safety. Certain dissolution and suspension components can affect the enrichment process. In this study, tangential flow ultrafiltration (TFUF) was used as an enrichment method for recovering enteric virus in water samples. Interestingly, the bacteriophage MS2 recovery in reclaimed water and the reclaimed water without particles were higher than that in ultrapure water. The simulated reclaimed water experiments showed that humic acid (HA) (92.16% ± 4.32%) and tryptophan (Try) (81.50 ± 7.71%) enhanced MS2 recovery, while the presence of kaolin (Kaolin) inhibited MS2 recovery with an efficiency of 63.13% ± 11.17%. Furthermore, Atomic force microscopy (AFM) revealed that the MS2-HA cluster and the MS2-Try cluster had larger roughness values on the membrane surface, making it difficult to be eluted, whereas MS2-Kaolin cluster had compact surfaces making it difficult to be eluted. Additionally, the MS2-HA cluster is bound to the membrane by single hydrogen bond with SO, whereas both the MS2-Try cluster and the MS2-Kaolin cluster are bound to the membrane by two hydrogen bonds, making eluting MS2 challenging. These findings have potential implications for validating standardized methods for virus enrichment in water samples.

Virus on surfaces: Chemical mechanism, influence factors, disinfection strategies, and implications for virus repelling surface design

While SARS-CoV-2 is generally under control, the question of variants and infections still persists. Fundamental information on how the virus interacts with inanimate surfaces commonly found in our daily life and when in contact with the skin will be helpful in developing strategies to inhibit the spread of the virus. Here in, a critically important review of current understanding of the interaction between virus and surface is summarized from chemistry point-of-view. The Derjaguin-Landau-Verwey-Overbeek and extended Derjaguin-Landau-Verwey-Overbeek theories to model virus attachments on surfaces are introduced, along with the interaction type and strength, and quantification of each component. The virus survival and transfer are affected by a combination of biological, physical, and chemical parameters, as well as environmental parameters. The surface properties for virus and virus survival on typical surfaces such as metals, plastics, and glass are summarized. Attention is also paid to the transfer of virus to/from surfaces and skin. Typical virus disinfection strategies utilizing heat, light, chemicals, and ozone are discussed together with their disinfection mechanism. In the last section, design principles for virus repelling surface chemistry such as surperhydrophobic or surperhydrophilic surfaces are also introduced, to demonstrate how the integration of surface property control and advanced material fabrication can lead to the development of functional surfaces for mitigating the effect of viral infection upon contact.

Evaluating the Microheterogeneous Distribution of Photochemically Generated Singlet Oxygen Using Furfuryl Amine

Singlet oxygen (1O2) is an important reactive species in natural waters produced during photolysis of dissolved organic matter (DOM). Prior studies have demonstrated that 1O2 exhibits a microheterogeneous distribution, with [1O2] in the interior of DOM macromolecules ∼30 to 1000-fold greater than in bulk solution. The [1O2] profile for DOM-containing solutions has been determined mainly by the use of hydrophobic probes, which are not commercially available. In this study, we employed a dual-probe method combining the widely used hydrophilic 1O2 probe furfuryl alcohol (FFA) and its structural analogue furfuryl amine (FFAm). FFAm exists mainly as a cation at pH <9 and was therefore hypothesized to have an enhanced local concentration in the near-DOM phase, whereas FFA will be distributed homogeneously. The probe pair was used to quantify apparent [1O2] in DOM samples from different isolation procedures (humic acid, fulvic acid, reverse osmosis) and diverse origins (aquatic and terrestrial) as a function of pH and ionic strength, and all samples studied exhibited enhanced reactivity of FFAm relative to FFA, especially at pH 7 and 8. To quantify the spatial distribution of [1O2], we combined electrostatic models with Latch and McNeill's three-phase distribution model. Modeling results for Suwannee River humic acid (SRHA) yield a surface [1O2] of ∼60 pM, which is ∼96-fold higher than the aqueous-phase [1O2] measured with FFA. This value is in agreement with prior reports that determined 1-3 orders of magnitude higher [1O2] in the DOM phase compared to bulk solution. Overall, this work expands the knowledge base of DOM microheterogeneous photochemistry by showing that diverse DOM isolates exhibit this phenomenon. In addition, the dual-probe approach and electrostatic modeling offer a new way to gain mechanistic insight into the spatial distribution of 1O2 and potentially other photochemically produced reactive intermediates.

Ions play different roles in virus removal caused by different NOMs in UF process: Removal efficiency and mechanism analysis

In this study, we investigated the effect of different compositions of aquatic natural organic matter (NOM) and ions on virus removal by ultrafiltration (UF). MS2 bacteriophage was used as a surrogate. Humic acid (HA) improved the MS2 removal rate from 1.95 ± 0.09 LRV to 2.40 ± 0.03 LRV at the HA dosage of 9 mg/L through the combined mechanisms of size exclusion, electrostatic repulsion and hydrophobicity. MS2 removal rate further increased to 3.10 ± 0.05 LRV by 10 mmol/L Na⁺ dosage and 3.19 ± 0.12 LRV by Ca²⁺ 1 mmol/L in the HA-containing UF system. Size exclusion turned into the dominant virus removal mechanism according to the results of the fouling model fitting and the weakening of electrostatic repulsion and hydrophobicity. The complexation of Ca²⁺ also played a role in MS2 removal based on the analysis of interaction force. MS2 removal rate by bovine serum albumin (BSA) was poor, which was 2.07 ± 0.06 LRV at the BSA dosage of 9 mg/L. Hydrophobicity was greatly reduced and the dominant virus removal mechanisms were size exclusion and electrostatic repulsion. 10 mmol/L Na⁺ in the presence of BSA deteriorated MS2 removal rate to 2.02 ± 0.07 LRV by the weakening of electrostatic repulsion, hydrophobicity and size exclusion. Electrostatic repulsion severely decreased by 1 mmol/L Ca²⁺ and the enhanced adsorption barrier represented competitive adsorption of Ca²⁺ by BSA and MS2 contributed for MS2 removal further decline (1.99 ± 0.05 LRV). Complex components in water will have different effects on virus removal due to their properties and interactions. This study can provide references for selecting more efficient water treatment methods according to the different compositions of raw water in actual water treatment applications during the UF process. Moreover, the retention of virus by UF can be predicted based on our study results.

A Roadmap for Building Waterborne Virus Traps

Outbreaks of waterborne viruses pose a massive threat to human health, claiming the lives of hundreds of thousands of people every year. Adsorption-based filtration offers a promising facile and environmentally friendly approach to help provide safe drinking water to a world population of almost 8 billion people, particularly in communities that lack the infrastructure for large-scale facilities. The search for a material that can effectively trap viruses has been mainly driven by a top-down approach, in which old and new materials have been tested for this purpose. Despite substantial advances, finding a material that achieves this crucial goal and meets all associated challenges remains elusive. We suggest that the road forward should strongly rely on a complementary bottom-up approach based on our fundamental understanding of virus interactions at interfaces. We review the state-of-the-art physicochemical knowledge of the forces that drive the adsorption of viruses at solid-water interfaces. Compared to other nanometric colloids, viruses have heterogeneous surface chemistry and diverse morphologies. We advocate that advancing our understanding of virus interactions would require describing their physicochemical properties using novel descriptors that reflect their heterogeneity and diversity. Several other related topics are also addressed, including the effect of coadsorbates on virus adsorption, virus inactivation at interfaces, and experimental considerations to ensure well-grounded research results. We finally conclude with selected examples of materials that made notable advances in the field.

Removal of MS2 and fr Bacteriophages Using MgAl2O4-Modified, Al2O3-Stabilized Porous Ceramic Granules for Drinking Water Treatment

Point-of-use ceramic filters are one of the strategies to address problems associated with waterborne diseases to remove harmful microorganisms in water sources prior to its consumption. In this study, development of adsorption-based ceramic depth filters composed of alumina platelets was achieved using spray granulation (calcined at 800 °C). Their virus retention performance was assessed using cartridges containing granular material (4 g) with two virus surrogates: MS2 and fr bacteriophages. Both materials showed complete removal, with a 7 log10 reduction value (LRV) of MS2 up to 1 L. MgAl2O4-modified Al2O3 granules possessed a higher MS2 retention capacity, contrary to the shortcomings of retention limits in pure Al2O3 granules. No significant decline in the retention of fr occurred during filtration tests up to 2 L. The phase composition and morphology of the materials were preserved during filtration, with no magnesium or aluminum leakage during filtration, as confirmed by X-ray diffractograms, electron micrographs, and inductively coupled plasma-optical emission spectrometry. The proposed MgAl2O4-modified Al2O3 granular ceramic filter materials offer high virus retention, achieving the criterion for virus filtration as required by the World Health Organization (LRV ≥ 4). Owing to their high thermal and chemical stability, the developed materials are thus suitable for thermal and chemical-free regeneration treatments.

Revealing protein binding affinity on metal surfaces: an electrochemical approach

Revealing the binding affinity between viruses and surfaces of environmental matrices is crucial to evaluate the bioactivity of an immobilized virus and accompanying indirect virus-related infection pathways. The understanding for SARS-CoV-2 remaining infective for even days on stainless steel but only hours on copper is still unclear. Electrochemical chronoamperometry, ultrasensitive to interfacial capacitance on surface species, was used to investigate the binding affinity of SARS-CoV-2 on metal surfaces. S_RBD, the surrogate of SARS-CoV-2, shows the highest adsorption capacity on a gold surface, followed by Cu, but lowest on a stainless steel surface. The strong binding of S_RBD on copper is a result of the naturally grown Cu₂O under ambient conditions. Measurement of electrochemical capacitance provides a simple strategy to explore and evaluate the potential risk of an indirect virus-related infection pathway through conductive environmental matrices.

Fate and Transportation of Viruses from Reclaimed Water into a Floatation System

The fate and transport of viruses in floatation systems is considerably important for accurate determination of the safety of reusing reclaimed water in the flotation process. Herein, simulation experiments on the floatation, adsorption and desorption were performed to examine the effect of initial virus concentration, pH and floatation reagents on the adsorption of viruses ΦΧ174 and MS2 onto copper–molybdenum ores. The transport of viruses in the flotation systems was also investigated. The viruses in the reclaimed water were rapidly adsorbed onto the ore particles, suggesting that tailing wastewater can be safely reused for floatation. However, the adsorbed viruses in the concentrates, middlings and tailings may pose health risks at certain exposure levels. The transport of viruses was dominated by their attachment to ore particles, with most being inactivated or irreversibly adsorbed. The removal and adsorption rates decreased as the initial virus concentration increased, and the removal rate decreased as pH was increased from 7.5 to 9.5. In comparison with MS2, ΦΧ174 was removed more effectively. This suggested that electrostatic repulsion is an important mechanism because MS2 has a greater negative charge. The attachment of both ΦΧ174 and MS2 onto the mineral particles increased significantly in the presence of PJ053 and CaO.

Competitive co-adsorption of bacteriophage MS2 and natural organic matter onto multiwalled carbon nanotubes

A leading challenge in drinking water treatment is to remove small-sized viruses from the water in a simple and efficient manner. Multi-walled carbon nanotubes (MWCNT) are new generation adsorbents with previously demonstrated potential as filter media to improve virus removal. This study therefore aimed to evaluate the field applicability of MWCNT-filters for virus removal in water containing natural organic matter (NOM) as co-solute to viruses, using batch equilibrium experiments. Contrary to previous studies, our results showed with MS2 bacteriophages single-solute systems that the affinity of MWCNT for MS2 was low, since after 3 h of equilibration only 4 log₁₀ reduction value (LRV) of MS2 (20 mL at an initial concentration of 10⁶ PFU MS2/mL) were reached. Single solute experiments with Suwannee river NOM (SRNOM) performed with environmentally-relevant concentrations showed MWCNT surface saturation at initial SRNOM concentrations between 10 and 15 mgC/L, for water pH between 5.2 and 8.7. These results suggested that at NOM:virus ratios found in natural waters, the NOM would competitively suppress virus adsorption onto MWCNT, even at low NOM concentrations. We confirmed this expectation with SRNOM-MS2 co-solute experiments, which showed an exponential decrease of the MS2 LRV by MWCNT with an increase in the initial SRNOM concentration. More interestingly, we showed that pre-equilibrating MWCNT with a SRNOM solution at a concentration as low as 0.4 mgC/L resulted in a LRV decrease of 3 for MS2, due to the formation of a negatively charged SRNOM adlayer on the MWCNT surface. Complementary batch experiments with natural NOM-containing waters and competition experiments with SRNOM in the presence of CaCl₂ confirmed that the presence of NOM in waters challenges virus removal by MWCNT-filters, irrespective of the concentration and type of NOM and also in the presence of Ca²⁺. We therefore conclude that MWCNT-filters produced with commercially available pristine MWCNT cannot be considered as a viable technology for drinking water virus removal.

Nano-Sized Copper (Oxide) on Alumina Granules for Water Filtration: Effect of Copper Oxidation State on Virus Removal Performance

Virus removal can be successfully achieved based on an electrostatic adsorption mechanism. The key requirement for this process is to develop filter materials that can be produced by low-cost technologies and are suitable in large-scale production for real applications. In this study, we report development of spray-dried alumina granules modified with copper (oxide) nanoparticles and critically assess the effect of copper oxidation state on virus removal capacity. Using plate-shaped alumina as a support material resulted in porous structure, which in turn ensured prolonged contact time of contaminated water with the material. Subsequently, copper (oxide) nanoparticles provided a large number of adsorption sites. Flow experiments revealed that copper(I) oxide and metallic copper were the active phases in virus removal and 99.9% of MS2 bacteriophages could be removed. However, almost no virus removal was observed in the presence of copper(II) oxide. Contrasting virus removal characteristics are associated with the different surface charge of copper species, as determined by zeta potential measurements.

Nanopowders of Yttria-Stabilized Zirconia Doped with Rare Earth Elements as Adsorbents of Humic Acids

The aim of the investigations was to use, for the first time, zirconia nanopowders stabilized with yttria (YSZ) and rare element oxides (YSZ-Nd, YSZ-Gd) for removal of humic acids (HA) from aqueous solutions. Nanopowders were synthesized by means of hydrothermal crystallization and characterized using scanning electron microscope (SEM) with energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) methods and analysis of zeta potential. The adsorption processes analysis was carried out in a series of experiments depending on: initial concentration of humic acids, contact time, pH and mass of the used adsorbent. It was found, that the YSZ-Nd exhibits strong and much higher effectiveness of HA adsorption than YSZ and YSZ-Gd. The HA adsorption rate reached 96.8% for YSZ-Nd dosage of 100 mg, pH 4, and 15 min reaction time and for HA initial concentration equal to 25 mg/L. According to the Langmuir model simulation, the maximum adsorption capacity of HA on YSZ-Nd at pH 4 was calculated to be 2.95 mg/g. Changes in the FT-IR spectra of YSZ-Nd confirmed humic acids’ adsorption on the tested nanopowders, by the presence of additional bands representing carboxylic, alcohol, carbonyl and amino groups in humic acid structure. These functional groups could represent humic acids binding on the YSZ, YSZ-Nd or YSZ-Gd surfaces.

Comparative Study of Two Methods of Enteric Virus Detection and Enteric Virus Relationship with Bacterial Indicator in Poyang Lake, Jiangxi, China

Currently, water contaminated with fecal matter poses a threat to public health and safety. Thus, enteric viruses are tested for as a part of water quality indicator assays; however, enteric viruses have not yet been listed in the criteria. Effective and sensitive methods for detecting enteric viruses are required in order to increase water safety. This study utilized enteric viruses as possible alternative indicators of water quality to examine fresh water in six sites in Poyang Lake, Nanchang, Jiangxi Province. The presence of norovirus geno-groups II (NoV GII), enteroviruses (EoV) and adenoviruses (AdV) were determined using Tianjin's protocol and Hawaii's protocol during a six month period from 2016-2017. The former used an electropositive material method for viral concentration and Taqman-q reverse transcription polymerase chain reaction (RT-PCR) to detect enteric viruses; while the latter used a filtration-based method for viral concentration and RT-PCR for enteric virus detection. There is a statistically significant difference between Tianjin's method and Hawaii's method for the detection of enteric viruses, such as NoV GII, EoV, and AdV (n = 36, p < 0.001). The enteric viruses showed no significant positive correlation with bacteria indicators (n = 36, p > 0.05). These data stress the need for additional indicators when establishing water quality systems, and the possibility of using enteric viruses as water quality indicators. It has become essential to improve shortcomings in order to search for an adequate method to detect enteric viruses in water and to implement such method in water quality monitoring.

Bisphenol S Adsorption Behavior on Ferralsol and Biochar Modified Soil with Dissolved Organic Matter

Bisphenol S (BPs) has been found in a variety of common consumer products surrounding human living, despite the fact that it could damage the human digestive system and genital system. In China, straw-returning to the field is a common soil improvement technology used to increase the concentration of dissolved organic matter (DOM), which plays an important role in the natural environment as a microreactor of contaminants. Additionally, the biochar obtained by the straw is an effective soil conditioner. DOM is a key influencing factor when biochar is employed as the conditioner of BPs contaminated soil. However, the BPs adsorption behavior on the Ferralsol affected by DOM and biochar is also unclear. Hence, DOM was prepared and the effect of DOM on the BPs adsorption behavior on soil and biochar modified soil was investigated. DOM was characterized by Elemental analysis, Fourier transforming infrared spectra (FT-IR), and three-dimensional excitation-emission matrix spectra (3D-EEM). The results of the adsorption experiments indicated that both biochar and DOM could improve the BPs adsorption capacity in Ferralsol, while DOM suppressed the BPs adsorption capacity of biochar modified soil, indicating that DOM and BPs could not be applied at the same time for BPs adsorption.

Adsorption behaviors of phenanthrene and bisphenol A in purple paddy soils amended with straw-derived DOM in the West Sichuan Plain of China

The objectives of this study were to investigate the adsorption and transfer behaviors of phenanthrene (PHE) and bisphenol A (BPA) in purple paddy soils amended with dissolved organic matter (DOM) derived from rice and canola straw in the West Sichuan Plain of China. In the pristine soil, PHE was preferentially adsorbed on both pristine clayey (L) and sandy (T) paddy soils than BPA, indicating that the retention/adsorption by soils is closely dependent on the chemical properties of organic pollutants (OPs). The noticeably higher adsorption of PHE and BPA on smaller size fraction of the soils (L2 and T2) were observed, possibly due to their higher surface areas and higher content in organic matters with higher aromaticity and hydrophobicity in this soil fraction. The DOMs derived from rice (RDOM) and canola (CDOM) straws possessed remarkable differences in E₂/E₃ and SUV₂₅₄ measurements, which reflected that their chemical composition might be different. When CDOM was introduced in the studied soil T1, adsorption of BPA was doubled, but the augment in adsorption was much less impressive with RDOM, showing the nature of derived DOM played an important role. The study also demonstrated that in the fine fraction of clayey soil (L2), the retention of a same OP (PHE) was remarkably dropped when CDOM or RDOM was introduced, whereas in a sandy soil of the same size fraction (T2), the phenomenon was the opposite, suggesting a potential risk that, in certain types of soil, the introduction of straw derived DOMs may enhance the mobility of some OPs. The humification time of straw seems not to affect the adsorptions of OPs in most studied systems. Adsorption kinetics of PHE and BPA in the adsorption systems with derived DOMs were well fitted to the two-step first-order model with r_adj² values of 0.994-0.998. Results of this study will provide further comprehensive fundamental data for risk assessment and control of organic pollutants (OPs) in farmland ecosystems.

A comprehensive review on the use of second generation TiO2 photocatalysts: Microorganism inactivation

Photocatalytic disinfection practices have been applied for decades and attract current interest along with the developments in synthesis of novel photocatalysts. A survey based investigation was performed for elucidation of photocatalytic treatment details as well as disinfection mechanism of microorganisms. The present work brings significant information on the utilization of second generation TiO₂ photocatalysts for inactivation of microorganisms typically using E. coli as the model microorganism. Special interest was devoted to the role of organic matrix either generated during treatment or as a natural component. Studies on photocatalytic disinfection were extensively reviewed and evaluated with respect to basic operational parameters related to photocatalysis, and types and properties of microorganisms investigated. Degradation mechanism and behavior of microorganisms towards reactive oxygen species during disinfection and organic matrix effects were also addressed. For successful utilization and effective assessment of visible light active photocatalysts, standard protocols for disinfection activity testing have to be set. Further improvement of the efficiency of these materials would be promising for future applications in water treatment processes.

Transfer of Enteric Viruses Adenovirus and Coxsackievirus and Bacteriophage MS2 from Liquid to Human Skin

Enteric viruses (viruses that infect the gastrointestinal tract) are responsible for most water-transmitted diseases. They are shed in high concentrations in the feces of infected individuals, persist for an extended period of time in water, and are highly infective. Exposure to contaminated water directly (through ingestion) or indirectly (for example, through hand-water contacts followed by hand-to-mouth contacts) increases the risk of virus transmission. The work described herein provides a quantitative model for estimating human-pathogenic virus retention on skin following contact with contaminated water. The work will be important in refining the contribution of indirect transmission of virus to risks associated with water-related activities.

Indirect exposure to waterborne viruses increases the risk of infection, especially among children with frequent hand-to-mouth contacts. Here, we quantified the transfer of one bacteriophage (MS2) and two enteric viruses (adenovirus and coxsackievirus) from liquid to skin. MS2, a commonly used enteric virus surrogate, was used to compare virus transfer rates in a volunteer trial to those obtained using human cadaver skin and synthetic skin. MS2 transfer to volunteer skin was similar to transfer to cadaver skin but significantly different from transfer to synthetic skin. The transfer of MS2, adenovirus, and coxsackievirus to cadaver skin was modeled using measurements for viruses attaching to the skin (adsorbed) and viruses in liquid residual on skin (unadsorbed). We find virus transfer per surface area is a function of the concentration of virus in the liquid and the film thickness of liquid retained on the skin and is estimable using a linear model. Notably, the amount of MS2 adsorbed on the skin was on average 5 times higher than the amount of adenovirus and 4 times higher than the amount of coxsackievirus. Quantification of pathogenic virus retention to skin would thus be overestimated using MS2 adsorption data. This study provides models of virus transfer useful for risk assessments of water-related activities, demonstrates significant differences in the transfer of pathogenic virus and MS2, and suggests cadaver skin as an alternative testing system for studying interactions between viruses and skin.

IMPORTANCE Enteric viruses (viruses that infect the gastrointestinal tract) are responsible for most water-transmitted diseases. They are shed in high concentrations in the feces of infected individuals, persist for an extended period of time in water, and are highly infective. Exposure to contaminated water directly (through ingestion) or indirectly (for example, through hand-water contacts followed by hand-to-mouth contacts) increases the risk of virus transmission. The work described herein provides a quantitative model for estimating human-pathogenic virus retention on skin following contact with contaminated water. The work will be important in refining the contribution of indirect transmission of virus to risks associated with water-related activities.

Analogies and differences among bacterial and viral disinfection by the photo-Fenton process at neutral pH: a mini review

Over the last years, the photo-Fenton process has been established as an effective, green alternative to chemical disinfection of waters and wastewaters. Microorganisms' inactivation is the latest success story in the application of this process at near-neutral pH, albeit without clearly elucidated inactivation mechanisms. In this review, the main pathways of the combined photo-Fenton process against the most frequent pathogen models (Escherichia coli for bacteria and MS2 bacteriophage for viruses) are analyzed. Firstly, the action of solar light is described and the specific inactivation mechanisms in bacteria (internal photo-Fenton) and viruses (genome damage) are presented. The contribution of the external pathways due to the potential presence of organic matter in generating reactive oxygen species (ROS) and their effects on microorganism inactivation are discussed. Afterwards, the effects of the gradual addition of Fe and H₂O₂ are assessed and the differences among bacterial and viral inactivation are highlighted. As a final step, the simultaneous addition of both reagents induces the photo-Fenton in the bulk, focusing on the differences induced by the homogeneous or heterogeneous fraction of the process and the variation among the two respective targets. This work exploits the accumulated evidence on the mechanisms of bacterial inactivation and the scarce ones towards viral targets, aiming to bridge this knowledge gap and make possible the further application of the photo-Fenton process in the field of water/wastewater treatment.

Charge, size distribution and hydrophobicity of viruses: Effect of propagation and purification methods

Two virus propagation methods (in broth and on double agar overlay) and three purification procedures (PEG precipitation, centrifugal diafiltration and CsCl density gradient centrifugation) were comparatively evaluated using MS2 and P22 bacteriophages as model viruses. The prepared stocks were characterized in terms of electrophoretic mobility as a function of pH, particle size distribution, surface tension components and the overall hydrophobicity of the virus, as well as the percentage of infectious and total virus recovered. The obtained data were used to rank the purification methods according to six criteria of likely practical relevance. Regardless of the purification method applied, virus propagation in broth media resulted in higher purity virus stocks as the growth on double agar overlay introduced difficult-to-remove residual agar. CsCl density gradient centrifugation gave the highest quality bacteriophage suspensions, recovered infectious P22 at least as efficiently as the other two purification methods and selected for intact P22 virions over damaged ones. The impurities remaining in the virus suspension after PEG precipitation and centrifugal diafiltration broadened the size distribution and interfered with electrophoretic mobility measurements. The residual impurities had a major impact on the free energy of virus-virus interfacial interaction (the quantitative measure of virus hydrophobicity/hydrophilicity) leading to an incorrect determination of P22 bacteriophage as hydrophilic. The trends in measured physicochemical properties can be rationalized by considering impurity-coated virions as permeable soft particles.

Real-time evaluation of natural organic matter deposition processes onto model environmental surfaces

Natural organic matter (NOM) is ubiquitous in aqueous systems and dynamically partitions onto/from environmental surfaces. However, such interfacial processes have not been uniformly quantified in situ and in real time. In this work, adsorption and deposition processes of Suwannee River humic acid (SRHA) and Suwannee River fulvic acid (SRFA), as model NOM, were evaluated for a series of environmentally relevant interfaces. Real-time, interfacial phenomenon, including deposition, release, and adlayer viscoelastic properties, were quantified over a variety of water chemistries via quartz crystal microbalance with dissipation monitoring (QCM-D). Specifically, adlayer mass and deposition rates of SRHA and SRFA were evaluated as a function of NOM concentration/molecular weight (fraction), pH, electrolyte composition (type and concentration), and collector surface type. For these, the adsorption of SRHA onto aluminum oxide (Al₂O₃) and polystyrene (PS) surfaces follows the Langmuir isotherm model. Rapid, near-monolayer formation of SRHA/SRFA adlayers were observed on Al₂O₃, hydroxyapatite (HAP), and poly (l-lysine) (PLL) surfaces, but not on PS or iron oxide (Fe₃O₄) surfaces. The presence of divalent cations (Ca²⁺/Mg²⁺) at relatively low concentrations (0.5-5.0 mM) significantly enhances the mass of SRHA/SRFA deposited onto the surfaces of silica (SiO₂), Al₂O₃, and PS. Viscoelastic properties of the adsorbed layer based on the ratio of dissipation to frequency revealed a relatively unique adlayer structure for SRHA in the presence of 5.0 mM Ca²⁺.

Virus Transfer at the Skin-Liquid Interface

Understanding virus transfer between liquid and skin is necessary to estimate transmission during water-related activities. Here, we modeled virus transfer from liquid-to-skin and skin-to-liquid. We performed human subject studies using three bacteriophages as pathogenic virus surrogates: nonenveloped MS2 and Qβ and enveloped Φ6. Our study shows that transfer from liquid-to-skin is describable by a single model based on (1) virus concentration and (2) volume of liquid remaining on skin. Contact times (0.1-30 min), and virus species had little-to-no influence on virus transfer. Likewise, liquid conditions (pH 6-9, ionic strength 10-550 mM) had no influence on transfer as shown for MS2. The model accounts for both, virus adsorbed onto the skin, and virus in the liquid retained on skin. In comparison, virus transfer from skin-to-liquid was influenced by the wetness of the skin and by liquid type (water, saliva). 90 ± 19% of the virus inoculated on the skin are transferred to the water when the skin remains wet compared to 30 ± 17% when the skin is dry. The transfer from skin-to-liquid was 41% higher when the recipient liquid was water as compared with saliva. This study quantifies virus transfer between liquid and skin and guides risk assessments of water-related activities.

Environmental Fate of Insecticidal Plant-Incorporated Protectants from Genetically Modified Crops: Knowledge Gaps and Research Opportunities

Plant-incorporated protectants (PIPs) are biopesticides expressed in genetically modified (GM) crops and are typically macromolecular in nature. First-generation insecticidal PIPs were Cry proteins expressed in GM crops containing transgenes from the soil bacterium Bacillus thuringiensis; next-generation double-stranded ribonucleic acid (dsRNA) PIPs have been recently approved. Like conventional synthetic pesticides, the use of either Cry protein or dsRNA PIPs results in their release to receiving environments. However, as opposed to conventional low molecular weight pesticides, the environmental fate of macromolecular PIPs remains less studied and is poorly understood. This Feature highlights the knowledge gaps and challenges that have emerged while investigating the environmental fate of Cry protein PIPs and suggests new avenues to advance the state of the research necessary for the ongoing environmental fate assessment of dsRNA PIPs.

Iron oxide-mediated semiconductor photocatalysis vs. heterogeneous photo-Fenton treatment of viruses in wastewater. Impact of the oxide particle size

The photo-Fenton process is recognized as a promising technique towards microorganism disinfection in wastewater, but its efficiency is hampered at near-neutral pH operating values. In this work, we overcome these obstacles by using the heterogeneous photo-Fenton process as the default disinfecting technique, targeting MS2 coliphage in wastewater. The use of low concentrations of iron oxides in wastewater without H₂O₂ (wüstite, maghemite, magnetite) has demonstrated limited semiconductor-mediated MS2 inactivation. Changing the operational pH and the size of the oxide particles indicated that the isoelectric point of the iron oxides and the active surface area are crucial in the success of the process, and the possible underlying mechanisms are investigated. Furthermore, the addition of low amounts of Fe-oxides (1mgL^-1) and H₂O₂ in the system (1, 5 and 10mgL^-1) greatly enhanced the inactivation process, leading to heterogeneous photo-Fenton processes on the surface of the magnetically separable oxides used. Additionally, photo-dissolution of iron in the bulk, lead to homogeneous photo-Fenton, further aided by the complexation by the dissolved organic matter in the solution. Finally, we assess the impact of the presence of the bacterial host and the difference caused by the different iron sources (salts, oxides) and the Fe-oxide size (normal, nano-sized).