Edible Dye-Enhanced Solar Disinfection with Safety Indication

Visible-Light-Induced Rapid Elimination of Antibiotic Resistance Contaminations Using Graphitic Carbon Nitride Tailored with Carrier Confinement Domains

Solar water disinfection facilitated by photocatalyst has been considered a viable point-of-use (POU) method for mitigating antibiotic resistance contaminations at the household or community levels. Here, density functional theory calculations are used to guide the fabrication of a carrier confinement domains (CCD)-decorated graphitic carbon nitride (CN) photocatalyst. The CCD integration effectively disrupts the electron distribution symmetry of CN, amplifies its local electron density, and facilitates the formation of a long-range ordered structure, thereby enhancing charge separation efficiency. Importantly, the CCD directs the migration of photogenerated carriers to specific regions upon light illumination, effectively minimizing their spatial proximity. As a result, the overall reactive oxygen species level of the photocatalytic system is markedly elevated, with a twelvefold increase in H2O2 concentration, alongside a significant rise in •O2 - and •OH steady-state concentrations. Remarkably, a record-high disinfection efficiency is attained, successfully inactivating 7 log of antibiotic-resistant bacteria within 30 min. Additionally, the photocatalyst can be integrated into a continuous-flow fixed-bed reactor, facilitating clean water production for up to 60 h at a rate of 121 L m-2 day-1, highlighting its significant potential for POU applications.

Efficient Degradation of Intracellular Antibiotic Resistance Genes by Photosensitized Erythrosine-Produced 1O2

Intracellular antibiotic resistance genes (iARGs) constitute the important part of wastewater ARGs and need to be efficiently removed. However, due to the dual protection of intracellular DNA by bacterial membranes and the cytoplasm, present disinfection technologies are largely inefficient in iARG degradation. Herein, we for the first time found that erythrosine (ERY, an edible dye) could efficiently degrade iARGs by producing abundant 1O2 under visible light. Seven log antibiotic-resistant bacteria were inactivated within only 1.5 min, and 6 log iARGs were completely degraded within 40 min by photosensitized ERY (5.0 mg/L). A linear relationship was established between ARG degradation rate constants and 1O2 concentrations in the ERY photosensitizing system. Surprisingly, a 3.2-fold faster degradation of iARGs than extracellular ARGs was observed, which was attributed to the unique indirect oxidation of iARGs induced by 1O2. Furthermore, ERY photosensitizing was effective for iARG degradation in real wastewater and other photosensitizers (including Rose Bengal and Phloxine B) of high 1O2 yields could also achieve efficient iARG degradation. The findings increase our knowledge of the iARG degradation preference by 1O2 and provide a new strategy of developing technologies with high 1O2 yield, like ERY photosensitizing, for efficient iARG removal.

Breaking the Photostability and pH Limitation of Halo-Fluoresceins through Chitosan Conjugation

Halo-fluoresceins are widely used in cell and tissue staining, intracellular sensing, and photodynamic therapy, but their notorious photo-instability and pH dependence restrict their applications, especially in long-term visible light exposure and acidic environments. To overcome these limitations, here a strategy is proposed of conjugating chitosan with the carboxyl group of halo-fluorescein (CS-halofluorescein). The cross-linked polymer chains and the hydrogen-bonding networks of chitosan help shielding out ¹ O₂ from direct attacking the encapsulated halo-fluoresceins, leading to a two orders of magnitude lower photobleaching rate. Meanwhile, the condensation of primary amines of chitosan with the carboxyl group on halo-fluorescein blocks the pH-dependent intramolecular spirocyclization, leading to pH-inert fluorescein derivatives. The greatly improved photostability and pH inertness of CS-halofluoresceins can be harvested for aerobic photoredox synthesis and photodynamic bacteria inactivation in extremely acidic media. Moreover, food additive nature of chitosan and erythrosine (TIF) and excellent film-forming property of chitosan allow coating-based light-assisted preservation of perishable fruits, leading to appreciably extended shelf life of fruits (e.g., perishable strawberry, rt: > 3 days; 4 °C: > 5 days).

Catalyst-Free Photochemical Activation of Peroxymonosulfate in Xanthene-Rich Systems for Fenton-Like Synergistic Decontamination: Efficacy of Proton Transfer Process

Catalyst-free visible light assisted Fenton-like catalysis offers opportunities to achieve the sustainable water decontamination, but the synergistic decontamination mechanisms are still unclear, especially the effect of proton transfer process (PTP). The conversion of peroxymonosulfate (PMS) in photosensitive dye-enriched system was detailed. The photo-electron transfer between excited dye and PMS triggered the efficient activation of PMS and enhanced the production of reactive species. Photochemistry behavior analysis and DFT calculations revealed that PTP was the crucial factor to determine the decontamination performance, leading to the transformation of dye molecules. The excitation process inducing activation of whole system was composed of low energy excitations, and the electrons and holes were almost contributed by LUMO and HOMO. This work provided new ideas for the design of catalyst-free sustainable system for efficient decontamination.

Kinetics and mechanism of the reaction of hydrogen peroxide with hypochlorous acid: Implication on electrochemical water treatment

Reduction of HOCl to Cl^- by in-situ electrochemical synthesis or ex-situ addition of H₂O₂ is a feasible method to minimize Cl-DBPs and ClO_x^- (x = 2, 3, and 4) formation in electrochemical oxidative water treatment systems. This work has investigated the kinetics and mechanism of the reaction between H₂O₂ and HOCl. The kinetics study showed the species-specific second order rate constants for HOCl with H₂O₂ (k₁), HOCl with HO₂^- (k₂) and OCl^- with H₂O₂ (k₃) are 195.5 ± 3.3 M^-1s^-1, 4.0 × 10⁷ M^-1s^-1 and 3.5 × 10³ M^-1s^-1, respectively. The density functional theory calculation showed k₂ is the most advantageous thermodynamically pathway because it does not need to overcome a high energy barrier. The yields of ¹O₂ generation from the reaction of H₂O₂ with HOCl were reinvestigated by using furfuryl alcohol (FFA) as a probe, and an average of 92.3% of ¹O₂ yields was obtained at pH 7-12. The second order rate constants of the reaction of ¹O₂ with 13 phenolates were determined by using the H₂O₂/HOCl system as a quantitative ¹O₂ production source. To establish a quantitative structure activity relationship, quantum chemical descriptors were more satisfactory than empirical Hammett constants. The potential implications in electrochemical oxidative water treatment were discussed at the end.

Facile monitoring of meat freshness with a self-constructed photosensitization colorimetric instrument

Total volatile basic nitrogen (TVB-N) produced from the decomposition of amino acids is an important indicator for meat freshness. Various pH-sensitive colorimetric films have been incorporated as intelligent packaging for meat freshness during food transportation. However, methods and instruments capable of on-site end-point detection of meat freshness are still needed for places that provide raw meat without packaging. Herein, based on amine-induced pH change that led to decreased color output of the 3,3',5,5'-tetramethylbenzidine (TMB)-based photosensitization colorimetric assay, a simple yet convenient instrument employing colorimetric indicator paper (CIP) was constructed for facile monitoring of meat freshness. Owing to the background color provided by the photosensitizer erythrosine (2',4',5',7'-tetraiodofluorescein, TIF), the color changed from blue to pink upon amine adsorption. A bespoke cellphone App was employed for image capture and color analysis of the CIP for freshness monitoring. The analytical results of amine (released from meat during storage) by the proposed method agreed well with those by a standard Conway dish method. In addition, the whole analytical process could be completed in about 5 min. The developed instrument may be potentially useful for on-site monitoring of meat freshness.

A modified flower pollen-based photothermocatalytic process for enhanced solar water disinfection: Photoelectric effect and bactericidal mechanisms

Solar disinfection (SODIS) is regarded as an affordable and effective point-of-use (POU) water disinfection treatment urgently needed in rural developing world. This work developed an enhanced SODIS scheme that utilized a novel flower pollen-based catalyst (Te-TRP). The bench-scale experiments demonstrated 100% photothermocatalytic inactivation of approximately 7-log E. coli K-12, Spingopyxis sp. BM1-1, or S. aureus bacterium by Te-TRP within 40-60 min. Moving toward practical device design, we constructed a flow-through reactor and demonstrated the outstanding water disinfection performance of Te-TRP. The in-depth mechanistic study revealed the synergetic effect between photocatalysis and photothermal conversion and identified the bacterial inactivation pathway. ¹O₂ and ·O₂^¯ were verified to be the dominant reactive oxygen species involved in the bacterial inactivation. The damage to bacterial cells caused by photothermocatalytic reactions was systematically investigated, demonstrating the cell membrane destruction, the loss of enzyme activity, the increased cell membrane permeability, and the complete inactivation of bacteria without the viable but nonculturable state cells. This work not only affords a facile approach to preparing biomaterial-based catalysts capable of efficient photothermocatalytic bacterial inactivation, but also proposes a prototype of POU water treatment, opening up an avenue for sustainable environmental remediation.

Photosensitized Electrospun Nanofibrous Filters for Capturing and Killing Airborne Coronaviruses under Visible Light Irradiation

To address the challenge of the airborne transmission of SARS-CoV-2, photosensitized electrospun nanofibrous membranes were fabricated to effectively capture and inactivate coronavirus aerosols. With an ultrafine fiber diameter (∼200 nm) and a small pore size (∼1.5 μm), optimized membranes caught 99.2% of the aerosols of the murine hepatitis virus A59 (MHV-A59), a coronavirus surrogate for SARS-CoV-2. In addition, rose bengal was used as the photosensitizer for membranes because of its excellent reactivity in generating virucidal singlet oxygen, and the membranes rapidly inactivated 97.1% of MHV-A59 in virus-laden droplets only after 15 min irradiation of simulated reading light. Singlet oxygen damaged the virus genome and impaired virus binding to host cells, which elucidated the mechanism of disinfection at a molecular level. Membrane robustness was also evaluated, and in general, the performance of virus filtration and disinfection was maintained in artificial saliva and for long-term use. Only sunlight exposure photobleached membranes, reduced singlet oxygen production, and compromised the performance of virus disinfection. In summary, photosensitized electrospun nanofibrous membranes have been developed to capture and kill airborne environmental pathogens under ambient conditions, and they hold promise for broad applications as personal protective equipment and indoor air filters.

Enhancement of E. coli inactivation by photosensitized erythrosine-based solar disinfection under weakly acidic conditions

Cost-effective disinfection technology is urgently needed in poor rural areas. Erythrosine (ERY)-based solar disinfection (SODIS) provides a promising solution because of its effective inactivation of viruses and gram-positive bacteria at low cost. However, the poor gram-negative bacteria (G^-, e.g., Escherichia coli) inactivation of photosensitized ERY inhibits its application. Herein, for the first time, the protonation of ERY was found to greatly enhance its G^- inactivation, and 99.99999% (7.0 log) of E. coli were completely inactivated within only 30 s using 2.5 mg/L ERY under 200 mW/cm² visible light irradiation. The inactivation rate constant (k) reached 17.5 min^-1 at pH 4.0, which was 4730 times higher than that at pH 7.0. At a lower pH, more severe cell wall and genomic DNA damage was observed. A linear correlation between k and monoanionic ERY (HE^-) content was obtained, indicating that HE^- rather than dianionic ERY (E^2-) participated in the inactivation at pH 5.0-7.0, which was further explained by the higher production of reactive oxygen species and bacterial adsorption of HE^- than E^2-. Both ¹O₂ and O₂^-• dominated bacterial inactivation, contributing 56.8% and 43.2%, respectively. O₂^-• but not ¹O₂ caused ERY photobleaching. OH• was not involved in either inactivation or photobleaching. Humic acid and salts (NaCl, Na₂SO₄, CaCl₂, and MgCl₂) slightly inhibited inactivation, while NaHCO₃ accelerated inactivation. Complete inactivation (99.9999%) of E. coli was achieved within ∼30 min at pH 5.0 in ERY-based SODIS with good adaptation to various water matrices and weather (sunny or partly cloudy). This work will help to promote the application of ERY-based disinfection especially for SODIS in poor rural areas.

Comparative effectiveness of membrane technologies and disinfection methods for virus elimination in water: A review

The pandemic of the 2019 novel coronavirus disease (COVID-19) has brought viruses into the public horizon. Since viruses can pose a threat to human health in a low concentration range, seeking efficient virus removal methods has been the research hotspots in the past few years. Herein, a total of 1060 research papers were collected from the Web of Science database to identify technological trends as well as the research status. Based on the analysis results, this review elaborates on the state-of-the-art of membrane filtration and disinfection technologies for the treatment of virus-containing wastewater and drinking water. The results evince that membrane and disinfection methods achieve a broad range of virus removal efficiency (0.5-7 log reduction values (LRVs) and 0.09-8 LRVs, respectively) that is attributable to the various interactions between membranes or disinfectants and viruses having different susceptibility in viral capsid protein and nucleic acid. Moreover, this review discusses the related challenges and potential of membrane and disinfection technologies for customized virus removal in order to prevent the dissemination of the waterborne diseases.

Solar disinfection (SODIS) technologies as alternative for large-scale public drinking water supply: Advances and challenges

Gastrointestinal waterborne diseases, continue to stand out among the most lethal diseases in developing countries, because of consuming contaminated water taken from unsafe sources. Advances made in recent decades in methods of solar water disinfection (SODIS) have shown that SODIS is an effective and inexpensive method of providing drinking water, capable of substantially reducing the prevalence and mortality of waterborne diseases. The increased impact of SODIS in communities lacking drinking water services depends on a successful upgrade from conventional SODIS (based on PET bottle reactors) in high flow continuous flow systems for solar water disinfection (CFSSWD). This review aimed to identify the main limitations of conventional SODIS that hinder its application as a large-scale drinking water supply strategy, and to propose ways to overcome these limitations (without making it economically inaccessible) based on the current frontier of advances technological. It was found that the successful development of the CFSSWD depends on overcoming the current limitations of conventional SODIS and the development of systems whose configurations allow combining the properties of solar pasteurization (SOPAS) and SODIS. Different improvements need to be made to the main components of the CFSSWD, such as increasing the performance of solar radiation collectors, photo and thermal reactors and heat exchangers. The integration of disinfection technologies based on photocatalytic and photothermal nanomaterials also needs to be achieved. The performance evaluation of the CFSSWD should be made considering resistant microorganisms, such as the environmental resistance structures of bacteria or protozoa (spores or (oo)cysts) as targets of disinfection approaches.

Ultrastructural Aspects of Photodynamic Inactivation of Highly Pathogenic Avian H5N8 Influenza Virus

Ultrastructural studies revealing morphological differences between intact and photodynamically inactivated virions can point to inactivation mechanisms and molecular targets. Using influenza as a model system, we show that photodynamic virus inactivation is possible without total virion destruction. Indeed, irradiation with a relatively low concentration of the photosensitizer (octacationic octakis(cholinyl) zinc phthalocyanine) inactivated viral particles (the virus titer was determined in Madin Darby Canine Kidney (MDCK) cells) but did not destroy them. Transmission electron microscopy (TEM) revealed that virion membranes kept structural integrity but lost their surface glycoproteins. Such structures are known as “bald” virions, which were first described as a result of protease treatment. At a higher photosensitizer concentration, the lipid membranes were also destroyed. Therefore, photodynamic inactivation of influenza virus initially results from surface protein removal, followed by complete virion destruction. This study suggests that photodynamic treatment can be used to manufacture “bald” virions for experimental purposes. Photodynamic inactivation is based on the production of reactive oxygen species which attack and destroy biomolecules. Thus, the results of this study can potentially apply to other enveloped viruses and sources of singlet oxygen.

Water Disinfection in Rural Areas Demands Unconventional Solar Technologies

Providing access to safe drinking water is a prerequisite for protecting public health. Vast improvements in drinking water quality have been witnessed during the last century, particularly in urban areas, thanks to the successful implementation of large, centralized water treatment plants and the distribution of treated water via underground networks of pipes. Nevertheless, infection by waterborne pathogens through the consumption of biologically unsafe drinking water remains one of the most significant causes of morbidity and mortality in developing rural areas. In these areas, the construction of centralized water treatment and distribution systems is impractical due to high capital costs and lack of existing infrastructure. Improving drinking water quality in developing rural areas demands a paradigm shift to unconventional, innovative water disinfection strategies that are low cost and simple to implement and maintain, while also requiring minimal infrastructure. The implementation of point-of-use (POU) disinfection techniques at the household- or community-scale is the most promising intervention strategy for producing immediate health benefits in the most vulnerable rural populations. Among POU techniques, solar-driven processes are considered particularly instrumental to this strategy, as developing rural areas that lack safe drinking water typically receive higher than average surface sunlight irradiation. Materials that can efficiently harvest sunlight to produce disinfecting agents are pivotal for surpassing the disinfection performance of conventional POU techniques. In this account, we highlight recent advances in materials and processes that can harness sunlight to disinfect water. We describe the physicochemical properties and molecular disinfection mechanisms for four categories of disinfectants that can be generated by harvesting sunlight: heat, germicidal UV radiation, strong oxidants, and mild oxidants. Our recent work in developing materials-based solar disinfection technologies is discussed in detail, with particular focus on the materials' mechanistic functions and their modes of action for inactivation of three common types of waterborne pathogens (i.e., bacteria, virus, and protozoa). We conclude that different solar disinfection technologies should be applied depending on the source water quality and target pathogen due to significant variations on susceptibility of microbial components to disparate disinfectants. In addition, we expect that ample research opportunities exist on reactor design and process engineering for scale-up and improved performance of these solar materials, while accounting for the infrastructure demand and capital input. Although the practical implementation of new treatment techniques will face social and economic challenges that cannot be overlooked, novel technologies such as these can play a pivotal role in reducing water borne disease burden in rural communities in the developing world.