Multiphase Porous Electrochemical Catalysts Derived from Iron-Based Metal-Organic Framework Compounds

Electro-oxidation of lincomycin and human pathogenic bacteria using carbon-supported lanthanide derivatives anodes: Accelerating wastewater remediation

Lanthanide metal-organic framework derivatives (Ln-MOFs) have emerged as effective conductive catalysts for enhancing the electrochemical performance of electrodes. This study presents a strategic approach to significantly improve the electrocatalytic activity of an anode in electrooxidation by integrating high-valence lanthanide metals into a carboxymethyl-functionalized carbon substrate. The focus is on investigating the degradation property of lincomycin (LIN) and the inactivation of human pathogenic bacteria (HPB, Escherichia coli (E. coli)). The results demonstrated that the Sm-MOF carboxymethyl-functionalized derived carbon (Sm-MOF/MCF) electrode exhibited exceptional electrochemical properties, including minimal charge transfer resistance (97.613 Ω/cm2), low corrosion current density (1.213 × 10-5 mA/cm2), high carrier density (2.071 × 1032), and an electrochemically active area of 229.600 cm2. As a promising anode, Sm-MOF/MCF achieved 99 % removal of LIN within 60 min and 95 % inactivation of E. coli within 20 min. Notably, density functional theory (DFT) calculations revealed that doping with Sm-MOF derivatives significantly reduced the activation energy barrier for hydroxyl radical (·OH) formation, thereby facilitating its generation and subsequent reaction with LIN and E. coli. In brief, this work offers innovative strategies for the development of electrodes aimed at effectively removing LIN and inactivating harmful HPB, highlighting new avenues for environmental remediation.

MIL-100-Fe self-assembled cellulose nanofibers sponge for Diclofenac cascade encapsulation

The conventional hydrothermal synthesis and inherent hysteresis behavior limited the application of MOFs owing to the low kinetic efficiency in dynamic molecular adsorption. Herein, we developed an in-situ nucleation strategy for the preparation of MIL-100-Fe and immobilized it with hierarchy porous scaffold of TEMPO oxidized cellulose nanofiber (TCNF) sponge in the absence of additional organic solvent during fabrication under ambient conditions. The newly recognized mechanisms of gradient molecular transfer were proposed to illustrate the comprehensive DCF adsorption process from solution to micropores of MIL-100-Fe at molecule level triggered by the stray capacitance, varied Laplace pressure, size exclusion and cellulosic labyrinth. Additionally, the superior biocompatibility and natural degradability (in 24 h) of MIL@TCNF sponge were demonstrated. The used material could be converted rapidly to zero-valent iron (ZVI) sponge via simple reduction process, achieving both dehalogenation of Diclofenac (DCF) and material regeneration. These findings uncover the propagable mechanisms of molecular-diffusion driven adsorption cascade and provide a novel fabrication strategy of 3-D environmental functional sponge with reusability and biodegradability for water pollution control.

Quasi Fe MIL-53 nanozyme inducing ferroptosis and immunogenic cell death for cancer immunotherapy

Nanozymes offer diverse therapeutic potentials for cancer treatment which is dependent on the development of nanomaterials. Quasi-metal-organic framework is a class of metal-organic framework-derived nanomaterials with a transition state from metal-organic frameworks towards metal oxide featuring porous structure and high activity. Herein an iron-based quasi-metal-organic framework nanozyme Q-MIL-53(Fe) is reported via a controlled deligandation strategy, exhibiting enhanced peroxidase-/catalase-mimic activity and glutathione depletion capacity, whose underlying mechanisms are studied via density functional theory calculations. Q-MIL-53(Fe) demonstrates biocompatibility and superior antitumor efficacy compared to pristine MIL-53(Fe). It can activate antitumor immune response by inducing ferroptosis and immunogenic cell death, promoting dendritic cell maturation and T lymphocytes infiltration. Furthermore, a combination of Q-MIL-53(Fe) and programmed cell death protein 1 antibody amplifies cancer immunotherapy. This study validates the antitumor activity of quasi-metal-organic frameworks and its immunotherapy induction potential. It would broaden the application of quasi-metal-organic frameworks and open avenues for developing antitumor nanozymes.

Cu-Doped V-Based MOF Derivative VO2@Cu-VMOF as a Cathodic Catalyst for Electro-Fenton Degradation of Antibiotics

In this study, the VO2@5%Cu-VMOF/graphite felt (GF) is prepared as an electro-Fenton cathode via hydrothermal process and low-temperature carbonization for efficient antibiotics degradation. The VO2@5%Cu-VMOF/GF cathode exhibit great ciprofloxacin (CIP) degradation performance over the pH range of 2.1-7.2, and CIP removal reached 98.1% within 60 min at a pH of 3.4, with corresponding total organic carbon (TOC) removal of 68.7%. The cathode also showed desired catalytic performance toward various antibiotics decomposition. The great catalytic activity of the VO2@5%Cu-VMOF/GF cathode is attributed to lattice strain induced by Cu doping, and the elimination of the overpotential difference between the optimal oxygen reduction potential (OP ORR) and optimal metal reduction potential (OP MRR). Density Function Theory (DFT) calculations showed that Cu doping facilitated electrons accumulation around V atoms, and thus increased the content of low-valence metals in the cathode material. Four possible degradation pathways for CIP are proposed and intermediate toxicity is evaluated. This work advances the design and application of MOF derivatives as electro-Fenton cathodic materials for emerging contaminants degradation.

Bimetallic FeCu-MOF derivatives as heterogeneous catalysts with enhanced stability for electro-Fenton degradation of lisinopril

A bimetallic FeCu/NC core-shell catalyst, consisting in nanoparticles where zero-valent Fe and Cu atoms, slightly oxidized on their surface, are encapsulated by carbon has been successfully prepared by modifying the synthesis route of MIL(Fe)-88B. FeCu/NC possessed well-balanced textural and electrochemical properties. According to voltammetric responses, in-situ Fe(III) reduction to Fe(II) by low-valent Cu was feasible, whereas the high double-layer capacitance confirmed the presence of a great number of electroactive sites that was essential for continuous H2O2 activation to •OH via Fenton's reaction. Electrochemical impedance and distribution of relaxation times (DRT) analysis informed about the strong leaching resistance of FeCu/NC. To validate the promising features of this catalyst, the advanced oxidation of the antihypertensive lisinopril (LSN) was investigated for the first time. The heterogeneous electro-Fenton (HEF) treatment of 16.1 mg L-1 LSN solutions was carried out in a DSA/air-diffusion cell. At pH 3, complete degradation was achieved within 6 min using only 0.05 g L-1 FeCu/NC; at near-neutral pH, 100 % removal was also feasible even in actual urban wastewater, requiring 60-75 min. The FeCu/NC catalyst demonstrated high stability, still maintaining 86.5 % of degradation efficiency after 5 cycles and undergoing low iron leaching. It outperformed the monometallic (Fe/NC and Cu/NC) catalysts, which is explained by the Cu(0)/Cu(I)-catalyzed Fe(II) regeneration mechanism that maintains the Fenton's cycle. LC-MS/MS analysis allowed the identification of two main primary LSN by-products. It can then be concluded that the FeCu/NC-based HEF process merits to be further scaled up for wastewater treatment.

Regulating Surface Dipole Moments of TiO2 for the pH-Universal Cathodic Fenton-Like Process

Although electro-Fenton (EF) processes can avoid the safety risks raised by concentrated hydrogen peroxide (H2O2), the Fe(III) reduction has always been either unstable or inefficient at high pH, resulting in catalyst deactivation and low selectivity of H2O2 activation for producing hydroxyl radicals (•OH). Herein, we provided a strategy to regulate the surface dipole moment of TiO2 by Fe anchoring (TiO2-Fe), which, in turn, substantially increased the H2O2 activation for •OH production. The TiO2-Fe catalyst could work at pH 4-10 and maintained considerable degradation efficiency for 10 cycles. Spectroscopic analysis and a theoretical study showed that the less polar Fe-O bond on TiO2-Fe could finely tune the polarity of H2O2 to alter its empty orbital distribution, contributing to better ciprofloxacin degradation activity within a broad pH range. We further verified the critical role of the weakened polarity of H2O2 on its homolysis into •OH by theoretically and experimentally investigating Cu-, Co-, Ni-, Mn-, and Mo-anchored TiO2. This concept offers an avenue for elaborate design of green, robust, and pH-universal cathodic Fenton-like catalysts and beyond.

Electrocatalytic Deep Dehalogenation and Mineralization of Florfenicol: Synergy of Atomic Hydrogen Reduction and Hydroxyl Radical Oxidation over Bifunctional Cathode Catalyst

It is difficult to achieve deep dehalogenation or mineralization for halogenated antibiotics using traditional reduction or oxidation processes, posing the risk of microbial activity inhibition and bacterial resistance. Herein, an efficient electrocatalytic process coupling atomic hydrogen (H*) reduction with hydroxyl radical (•OH) oxidation on a bifunctional cathode catalyst is developed for the deep dehalogenation and mineralization of florfenicol (FLO). Atomically dispersed NiFe bimetallic catalyst on nitrogen-doped carbon as a bifunctional cathode catalyst can simultaneously generate H* and •OH through H2O/H+ reduction and O2 reduction, respectively. The H* performs nucleophilic hydro-dehalogenation, and the •OH performs electrophilic oxidization of the carbon skeleton. The experimental results and theoretical calculations indicate that reductive dehalogenation and oxidative mineralization processes can promote each other mutually, showing an effect of 1 + 1 > 2. 100% removal, 100% dechlorination, 70.8% defluorination, and 65.1% total organic carbon removal for FLO are achieved within 20 min (C0 = 20 mg·L-1, -0.5 V vs SCE, pH 7). The relative abundance of the FLO resistance gene can be significantly reduced in the subsequent biodegradation system. This study demonstrates that the synergy of reduction dehalogenation and oxidation degradation can achieve the deep removal of refractory halogenated organic contaminants.

Effective photocatalytic degradation of amphotericin B and naproxen from aqueous solutions using carbon quantum dots combined in MIL-88B(Fe) under visible light

A photocatalytic adsorbent composed of carbon dots (CD) embedded in a metal-organic framework (MOF) of MIL-88 B(Fe) was prepared by solvothermal technique. The synthesized CD@MIL-88 B(Fe) was characterized by different X-ray-based microscopic and spectroscopic methods, as well as electrochemical impedance spectroscopy, UV-Vis, FT-IR, DRS, TGA, and photoluminescence (PL) analysis. The prepared adsorbent showed a remarkable photocatalytic activity for eliminating amphotericin B (AmB) and naproxen (Nap) from aqueous solutions under visible light, reaching up to 92% and 90% removal, respectively, with an RSD value of around 5%. The parameters affecting the degradation process of pharmaceuticals were investigated. The optimal conditions for the degradation process were determined, including pH values (3 and 4 for AmB and Nap), photocatalyst concentration (0.2 g L-1), and H2O2 concentration (40-50 mM). Reactive oxidative species were also identified (·OH, ·O2) by examination of different scavengers. The adsorption isotherm and kinetic studies reveal that the synthesized photocatalyst exhibits dual functionality as an effective adsorbent (with maximum adsorption capacities of 42.5 and 121.5 mg g-1 for AmB and Nap) and a photocatalytic agent for removal purposes.

Metal-organic framework derived bio-anode enhances chlorobenzene removal and electricity generation: Special Ru4+/Ru3+-bridged intracellular electron transfer

Efficient removal of chlorinated organic contaminants using the microbial fuel cell (MFC) provides a promising strategy to alleviate water pollution and energy crisis. However, bio-degradation is challenged by poor biofilm formation and sluggish intracellular electron transfer, causing unsatisfactory electricity generation. To address those problems, a metal-organic framework derivative, Ru-porous TiO2 (Ru-PT) bio-anode has been artfully designed herein for chlorobenzene removal. The Ru-PT bio-anode not only formed a compact anodic biofilm due to the large specific surface area of PT, but more importantly, it introduced special pseudocapacitance-enhanced intracellular electron transfer by slowly implanting Ru4+/Ru3+ redox pair into bacteria. Such a Ru4+/Ru3+ implantation was then found to directionally induce the enrichment of a dual-functional genus (degrader & exoelectrogen), Pseudomonas, thereby enhancing the conversion of bio-refractory chlorophenols towards biodegradable carboxylic acids. These features allowed our MFC to have a resilient chlorobenzene removal and accompanied satisfactory electricity generation, with power density, coulombic efficiency, and turnover frequency reaching 662 mW m-2, 8.7%, and 386,622 s-1, which outcompeted those of other MFCs reported. Further, benefiting from the reversible pseudocapacitance, the Ru-PT bio-anode intriguingly functioned as an internal capacitor for electricity storage. This work provided important insights into cost-effective bio-anode development and offered an avenue for engineering MFC.

Enhanced electrochemical-activation of H2O2 to produce •OH by regulating the adsorption of H2O2 on nitrogen-doped porous carbon for organic pollutants removal

The heterogeneous Fenton oxidation is regarded as a promising technology for refractory organic pollutants removal relying on highly active •OH generated via the decomposition of H2O2 catalyzed by iron-based catalyst that overcomes the issues of pH limitation and iron sludge discharge encountered in conventional Fenton reaction. However, the efficiency of •OH production in heterogeneous Fenton remains low as the limited mass transfer between H2O2 and catalysts caused by the poor H2O2 adsorption. Here, a nitrogen-doped porous carbon (NPC) catalyst with tunable N configuration was prepared for electrochemical-activation of H2O2 to •OH by enhancing the H2O2 adsorption on catalysts. The resultant •OH production yield on NPC reached 0.83 mM in 120 min. Notably, the NPC catalyst could be more energy-efficient for actual coking wastewater treatment with an energy consumption of 10.3 kWh kgCOD-1 than other electro-Fenton catalysts reported (20-29.7 kWh kgCOD-1). Density function theory (DFT) revealed that highly efficient •OH production was ascribed to the graphitic N which enhances the adsorption energy of H2O2 on NPC catalyst. This study provides new insight into the fabrication of efficient carbonaceous catalysts by rationally modulating electronic structures for refractory organic pollutants degradation.

Functionalized nanozyme with drug loading for enhanced tumour combination treatment of catalytic therapy and chemotherapy

Nanozyme-based tumour catalytic therapy has attracted widespread attention in recent years, but the therapeutic efficacy is limited due to the trapping of hydroxyl radicals (˙OH) by endogenous glutathione (GSH) in the tumour microenvironment (TME). Zr/Ce-MOFs/DOX/MnO2 is constructed in this work to serve as a new kind of nanozyme for combination chemotherapy and catalytic treatment. Zr/Ce-MOFs can produce ˙OH in a mimic TME, and the MnO2 on the surface could deplete the GSH, further promoting the ˙OH generation. The pH/GSH dual stimulation accelerates the release of anticancer drug doxorubicin (DOX) in tumour tissue for enhanced tumour chemotherapy. Moreover, Mn2+ produced by the reaction of Zr/Ce-MOFs/DOX/MnO2 and GSH can be used as the contrast agent for T1-MRI. The potential antitumour effect of Zr/Ce-MOFs/DOX/MnO2 is demonstrated by in vitro and in vivo cancer treatment tests. This work thus provides a new nanozyme-based platform for enhanced combination chemotherapy and catalytic treatment for tumours.

Mn doping improves in-situ H2O2 generation and activation in electro-Fenton process by Fe/Mn@CC cathode using high-temperature shock technique

Fe/Mn@carbon cloth (CC) was successfully fabricated through high-temperature shock (HTS) technique and used as cathode modification in heterogeneous electro-Fenton (hetero-EF) process for methylisothiazolinone (MIT) degradation. The nanocrystalline on Fe/Mn@CC electrode is doped with Fe and Mn oxides and coated with carbon layer, which could markedly enhance the electrocatalysis with high electro-chemical active area and low resistance. Fe/Mn@CC modified cathode can efficiently in-situ produce and activate H₂O₂, showing high electrocatalytic activity to MIT degradation. The 95.2% MIT degradation with in 100 min were achieved under the condition of 30 mA current, 0.75 L min^-1 aeration intensity and initial pH = 3. Based on the CV curves and stability test, the high degradation activity revealed the kinetically beneficial regeneration of Fe^II/Mn^II in Fe/Mn@CC and activation of H₂O₂. The electron transfer between Fe^II/III and Mn^II/III, together with the direct Fe^II/Mn^II regeneration on the cathode, could markedly promote the H₂O₂ utilization, and eventually lead to MIT degradation.

Electronic Control of Traditional Iron-Carbon Electrodes to Regulate the Oxygen Reduction Route to Scale Up Water Purification

Shifting four-electron (4e^-) oxygen reduction in fuel cell technology to a two-electron (2e^-) pathway with traditional iron-carbon electrodes is a critical step for hydroxyl radical (HO^•) generation. Here, we fabricated iron-carbon aerogels with desired dimensions (e.g., 40 cm × 40 cm) as working electrodes containing atomic Fe sites and Fe₃C subnanoclusters. Electron-donating Fe₃C provides electrons to FeN₄ through long-range activation for achieving the ideal electronic configuration, thereby optimizing the binding energy of the *OOH intermediate. With an iron-carbon aerogel benefiting from finely tuned electronic density, the selectivity of 2e^- oxygen reduction increased from 10 to 90%. The resultant electrode exhibited unexpectedly efficient HO^• production and fast elimination of organics. Notably, the kinetic constant k_M for sulfamethoxazole (SMX) removal is 60 times higher than that in a traditional iron-carbon electrode. A flow-through pilot device with the iron-carbon aerogel (SA-Fe_0.4NCA) was built to scale up micropolluted water decontamination. The initial total organic carbon (TOC) value of micropolluted water was 4.02 mg L^-1, and it declined and maintained at 2.14 mg L^-1, meeting the standards for drinking water quality in China. Meanwhile, the generation of emerging aromatic nitrogenous disinfection byproducts (chlorophenylacetonitriles) declined by 99.2%, satisfying the public safety of domestic water. This work provides guidance for developing electrochemical technologies to satisfy the flexible and economic demand for water purification, especially in water-scarce areas.

Flower-like molybdenum disulfide decorated ZIF-8-derived nitrogen-doped dodecahedral carbon for electro-catalytic degradation of phenol

In this work, flower-like molybdenum disulfide was constructed on the surface of ZIF-8-derived nitrogen-doped dodecahedral carbon (ZNC) for the electrocatalytic degradation of phenol. The flower-like nanostructure of MoS₂@ZNC contributed to the exposure of more edge-active sites of MoS₂. At the same time, Mo⁴⁺ and Mo⁶⁺ co-existed in MoS₂@ZNC, which promoted the generation of H₂O₂ and •OH, and improved the catalytic activity of composite materials. In addition, electrochemical performance analysis showed that MoS₂ loaded on the surface of ZNC significantly improved the redox capacity of the material, and the composite ratio of MoS₂ and ZNC affected the structure and properties of MoS₂@ZNC composites. Moreover, the electrochemical performance of prepared MoS₂@ZNC was evaluated by the generation of hydroxyl (•OH) and the degradation efficiency of phenol. The results showed that MoS₂@ZNC-2 had an excellent phenol degradation efficiency (98.8%) and COD removal efficiency (86.8%) within 120 min. Furthermore, MoS₂@ZNC cathode still maintained good performance after being experimented with 20 times, indicated the excellent stability of MoS₂@ZNC.

Coupling electrode aeration and hydroxylamine for the enhanced Electro-Fenton degradation of organic contaminant: Improving H2O2 generation, Fe3+/Fe2+ cycle and N2 selectivity

To improve H2O2 generation and Fe3+/Fe2+ cycle simultaneously for enhancing Electro-Fenton performance, the electrode aeration (EA) and hydroxylamine sulfate (HA) were coupled. With dimethyl phthalate (DMP) as main target contaminant, combination of HA and EA greatly accelerated the degradation of DMP and exhibited a synergy in the pH of 2.0-6.9 through promoting the key reactions, including electrochemical two-electron reduction of O2 into H2O2 and redox cycles of Fe3+/Fe2+, which then improved the generation of hydroxyl radicals (·OH). The coupling EA and HA reduced the use of HA and converted most of HA into environment-friendly N2 (60.1-62.1% of HA products), while HA/solution aeration(SA) system consumed HA rapidly and the generated N2 only accounted for 5.8-6.7% of HA products. Furthermore, compared with HA/SA and EA Electro-Fenton systems, enhancement degree of DMP degradation in HA/EA Electro-Fenton process was higher in actual waterbody than in ultrapure water. The coupling EA and HA in the Electro-Fenton process could solve the low Fe3+/Fe2+ cycle efficiency and low H2O2 production simultaneously, and improve the N2 selectivity of HA transformation, which advanced its application in practical environmental remediation.

Trimetallic carbon-based catalysts derived from metal-organic frameworks for electro-Fenton removal of aqueous pesticides

Pesticide overuse has posed a threat to agricultural community as well as aquatic animals. Heterogeneous electro-Fenton (HEF) processes have received considerable attention for aqueous contaminants removal, and metal-organic frameworks (MOFs) serve as promising templates for fabrication of carbon-based HEF catalysts with low Fe leaching and enhanced stability. Herein, multimetallic MOF-derived HEF catalysts CMOFs@PCM have been demonstrated as efficient and stable HEF catalysts for aqueous pesticide degradation and mineralization. The porous carbon monolith (PCM) substrate effectively catalyzed 2-electron oxygen reduction reaction (ORR) over the pH range of 4-10 to in situ generate H₂O₂, which was then activated by the anchored Fe₃O₄, Fe₃C and NiO into OH for pesticide degradation. Fe₈Al₇Ni₅-CMOF@PCM achieved over 90% napropamide degradation within 60 min in the pH range of 4-10, and 96% degradation at neutral condition, 39% higher than monometallic CMIL-88(Fe)@PCM. Meanwhile, the embedded NiO and γ-Al₂O₃ showed synergistic effect in promoting the catalytic activity of Fe sites, resulting in substantially enhanced performance of trimetallic Fe_xAl_yNi_z-CMOF@PCM compared to the monometallic counterparts. On the other hand, the unique core-shell structure and Fe₃C interlayer formed by co-pyrolyzing Fe-containing MOFs-NH₂ with PCM greatly minimized the metal leaching and enhanced the stability of the electrocatalysts.

Derivatives of metal-organic frameworks for heterogeneous Fenton-like processes: From preparation to performance and mechanisms in wastewater purification - A mini review

Organic pollution is an ever-growing issue in aquatic environment, Fenton-like processes have gained widespread acceptance due to their high oxidative potential and environmental compatibility. Derivatives of metal-organic frameworks (MOFs) are emerging heterogeneous Fenton-like catalysts, which have advantages of large surface area, diversity of structures, and abundant active sites. This work focuses on the recent advances in MOFs derivatives including metal compounds and metal incorporated carbons for Fenton-like processes. First, preparation strategies, structures and compositions are introduced. And then, the removal of organic pollutant in Fenton, electro-Fenton, and photo-Fenton process catalyzed by MOFs derivative is summarized, respectively. The contents particularly devote efforts to build connections among preparation, structures, compositions, and performance. Furthermore, the mechanisms of improving performance are discussed in detail. Finally, the perspectives of MOFs derivatives toward Fenton-like applications are proposed.

Tannic acid-Fe complex derivative-modified electrode with pH regulating function for environmental remediation by electro-Fenton process

A heterogeneous electro-Fenton (hetero-EF) system can effectively broaden the applicable pH range, although the decreased electrogeneration efficiency of H₂O₂ at elevated pH (especially neutral conditions) is unfavorable for the efficient removal of organic pollutants. Herein, a tannic acid-Fe complex derivative-modified carbon felt (TFD@CF) cathode was prepared for hetero-EF treatment of organic pollutants over a wide pH range. Interestingly, the as-prepared hetero-EF cathode could act as a pH regulator that acidified the solution over a wide pH range. As expected, the TFD@CF cathode exhibited excellent hetero-EF activity for the removal of diverse organic pollutants (such as methyl orange, methylene blue, sulfamerazine, bisphenol A and 2,4-dichlorophenoxyacetic acid) at neutral and even alkaline pH (removal efficiency >90 %). A total of 2.98 kWh kg^-1 COD^-1 with 83.2 % COD removal could be achieved by the TFD@CF cathode for the treatment of actual textile dyeing secondary wastewater. Electrochemical characterizations proved that the TFD@CF cathode had excellent electrochemical properties with improved electron transfer ability and a well-pronounced Fe(III) electroreductive response. Meanwhile, more acidic groups were newly generated during the electrochemical reaction (an increase of 30.1 %), thus dissociating more H⁺ into solution. The identification of reactive oxygen species suggested that OH and ¹O₂ could be responsible for the removal of organic pollutants in the TFD@CF EF system. These interesting findings may provide new insights into the design of multifunctional hetero-EF cathodes for the removal of refractory organic pollutants.

S-doped MIL-53 as efficient heterogeneous electro-Fenton catalyst for degradation of sulfamethazine at circumneutral pH

The reduced S-modified MIL-53(Fe) was prepared by sulfurizing MIL-53(Fe) at low temperature, which was an efficient electro-Fenton catalyst at wide pH range (3-9) for sulfamethazine (SMT) degradation. The best temperature and MIL-53(Fe)/S ratio were 350 °C and 1:2, at which the BET surface area was much enlarged. The MIL-53(Fe) surface was etched by S to many 2D nanosheets with the thickness of ~50 nm, while S_2-2 replaced OH^- to coordinate with Fe²⁺ and increased the Fe²⁺ content, which improved the catalytic performance. Even at initial pH of 7.0, the SMT removal was 95.8%, and the rate constant (k) in the Hetero-EF process was 16-folds of that in the Homo-EF process. The turnover frequency (TOF_d) value of MIL-53(Fe)/S(1:2)-350 was 0.48 L g^-1 min^-1, which was 6.8 times that of commercial FeS₂. The S_2-2in catalyst adjusted the pH superfast, and promoted the generation of Fe²⁺ and thus efficiently activating H₂O₂ to form surface ^·OH, which was verified to be the main radical by EPR and radical scavenger experiments. This catalyst showed promising prospect for environmental application and could be regenerated by sulfidation method. S-doped MIL-53(Fe) was an excellent pH regulator, thus promoting promising application in Hetero-EF processes.

Tailor the crystal planes of MIL-101(Fe) derivatives to enhance the activity of SCR reaction at medium and low temperature

Mainly exposed crystal facets and controllable morphology play a key role in the final performance of the preparation of specific nanomaterials. In the present study, a metal-organic framework pyrolysis method without adding solvent modifiers was developed. By adding CO in the calcination atmosphere to change atmosphere ratio, Fe₃O₄ nanostructures are exposed with different crystal planes and evaluated their performance in NH₃-SCR reaction. This study proves that SCR catalytic activity of Fe₃O₄ nanocrystals is dependent on morphology and crystal facet. Compared with materials exposed (100), catalysts with more (111) show stronger deNO_x performance. The preferential exposure of Fe₃O₄ (111) crystal facets increases the concentration of adsorbed oxygen on the catalyst, showing higher surface acidity, and enhances the interaction among NO, O₂ and catalyst, which is conducive to SCR reaction. This is supported by DFT calculations. The results present a great application prospect in preparing nanomaterials with specific crystal structures to effectively treat pollutants.

Micro/macrostructure and multicomponent design of catalysts by MOF-derived strategy: Opportunities for the application of nanomaterials-based advanced oxidation processes in wastewater treatment

Advanced oxidation processes (AOPs) have demonstrated an effective wastewater treatment method. But the application of AOPs using nanomaterials as catalysts is challenged with a series of problems, including limited mass transfer, surface fouling, poor stability, and difficult recycling. Recently, metal-organic frameworks (MOFs) with high tunability and ultrahigh porosity are emerging as excellent precursors for the delicate design of the structure/composition of catalysts and many MOF-derived catalysts with distinct physicochemical characteristics have shown optimized performance in various AOPs. Herein, to elucidate the structure-composition-performance relationship, a review on the performance optimization of MOF-derived catalysts to overcome the existing problems in AOPs by micro/macrostructure and multicomponent design is given. Impressively, MOF-derived strategy for the design of catalyst materials from the aspects of microstructure, macrostructure, and multicomponent (polymetallic, heteroatom doping, M/C hybrids, etc.) is firstly presented. Moreover, important advances of MOF-derived catalysts in the application of various AOPs (Fenton, persulfate-based AOPs, photocatalysis, electrochemical processes, hybrid AOPs) are summarized. The relationship between the unique micro/macrostructure and/or multicomponent features and performance optimization in mass transfer, catalytic efficiency, stability, and recyclability is clarified. Furthermore, the challenges and future work directions for the practical application of MOF-derived catalysts in AOPs for wastewater treatment are provided.

Catalytic properties of the ferryl ion in the solid state: a computational review

This review summarises the last findings in the emerging field of heterogeneous catalytic oxidation of light alkanes by ferryl species supported on solid-state systems such as the conversion of methane into methanol by FeO-MOF74.

Filter-membrane treatment of flowing antibiotic-containing wastewater through peroxydisulfate-coupled photocatalysis to reduce resistance gene and microbial inhibition during biological treatment

The direct biological treatment of antibiotics containing wastewater brings about a potential risk of antibiotic resistance genes (ARGs) spread. Although advanced oxidation technologies based on photocatalysis generally appear effective at degrading antibiotics in wastewater, the fate of ARGs in succeeding biological treatment system is still unknown. Herein, a filter-membrane-like carbon cloth-immobilized Fe₂O₃/g-C₃N₄ photocatalyst is fabricated through immersion-calcination method. Peroxydisulfate-coupled photocatalysis system is developed to degrade tetracycline (TC, an emerging refractory antibiotic pollutant). The system can produce energetic active species (·OH, SO₄^·-, h⁺, O₂^·- and ¹O₂), exhibiting a superior performance towards TC degradation in static and continuous flow processes under visible-light irradiation. The pretreatment can eliminate the antibacterial activity of antibiotics wastewater, and the chemical oxygen demand removal is greatly enhanced in subsequent anaerobic or aerobic process. The microbial diversity and richness in activated sludge for pretreated water sample are significantly higher than those for the water sample without pretreatment. Meanwhile, the pretreatment can decrease the relative abundance of potential hosts of ARGs and reduce the emergence as well as dissemination risk of ARGs. This study uncovers the effect of pretreatment of antibiotics containing wastewater using advanced oxidation technologies on the treatment efficacy and antibiotic resistome fate in biological treatment system.

The Surge of Metal-Organic-Framework (MOFs)-Based Electrodes as Key Elements in Electrochemically Driven Processes for the Environment

Metal–organic-frameworks (MOFs) are emerging materials used in the environmental electrochemistry community for Faradaic and non-Faradaic water remediation technologies. It has been concluded that MOF-based materials show improvement in performance compared to traditional (non-)faradaic materials. In particular, this review outlines MOF synthesis and their application in the fields of electron- and photoelectron-Fenton degradation reactions, photoelectrocatalytic degradations, and capacitive deionization physical separations. This work overviews the main electrode materials used for the different environmental remediation processes, discusses the main performance enhancements achieved via the utilization of MOFs compared to traditional materials, and provides perspective and insights for the further development of the utilization of MOF-derived materials in electrified water treatment.

Porous carbon monoliths for electrochemical removal of aqueous herbicides by "one-stop" catalysis of oxygen reduction and H2O2 activation

The overuse of herbicides has posed a threat to human health and the aquatic environment via DNA mutations and antibiotic gene resistance. Carbon-based cathodic electrochemical advanced oxidation has evolved as a promising technology for herbicide degradation by generating hydroxyl radicals (•OH). However, conventional electro-Fenton process relies on interaction of multiple species that adds to the system complexity and cost and narrows the working pH range. Herein, a series of porous carbon monoliths (PCMs) were developed as a "one-stop" platform for catalysis of the 2-electron ORR coupled with further catalytic reductive cleavage of H₂O₂ to produce •OH. A PCM prepared using 1,6-hexamethylene diamine (denoted as PCM-HDA) produced H₂O₂ at a level that was 374% higher than that obtained using commercially available carbon black at circum-neutral pH. Meanwhile, the generated H₂O₂ was catalytically decomposed to produce •OH. Based on these results, the PCM-HDA electrode achieved an 80 ± 2% degradation of napropamide in 60 min over the pH range of 4-10 at a mildly reducing potential, with a 69 ± 2% TOC reduction at circum-neutral condition in 2 h. This simplified system overcomes the system complexity and pH limitation of the conventional electron-Fenton processes.

Oxygen functionalized g-C3N4 strengthen Fe(III)/H2O2 system by accelerating Fe(III)/Fe(II) cycles under natural solar light: A mutual-promoting configuration

In response to the inherent restriction of low Fe(II) regeneration in the Fenton process, this study demonstrated a mutual-promoting configuration, where oxygen functionalized g-C₃N₄ (OCN) was applied in Fe(III)/H₂O₂ system to utilize mild natural solar light (SL) for persistent Fe(II) generation. The constructed OCN/Fe(III)/H₂O₂/SL system exhibited strong adaptability to various pollutants, and it well outperformed the g-C₃N₄ (GCN) modified system and the traditional Fenton system in pollutants degradation efficiency. Compared with GCN, OCN could significantly promote the Fe(II) generation under solar light (SL), leading to more efficient H₂O₂ activation. The characterization analyses revealed the larger surface area and enhanced charge separation of OCN, which were considered to take main responsibility for its enhanced photoactivity. The complexation of Fe(III) with the carboxyl groups of OCN also benefited the Fe(II) generation. ·OH was detected as the dominant radical responsible for metronidazole (MNZ) degradation, and its production in the OCN modified system was about twice that in the GCN modified system and the Fenton system. Moreover, the precipitation of FeO_x on the OCN surface benefited the charge separation of the OCN, so that the improved OCN enabled a slight enhancement of MNZ degradation in the reuse experiments. The intermediates of MNZ degradation were analyzed based on the results of LC-MS, which provided insight into MNZ degradation pathways. This work highlighted the concept of self-improving photocatalyst, the ingenious combination of photocatalysis and Fenton-like system formed a mutual-promoting situation where the OCN and the Fenton-like system could both be improved, which endowed the configuration great potential for green and economical oxidation in environmental remediation.

Enhanced electro-Fenton catalytic performance with in-situ grown Ce/Fe@NPC-GF as self-standing cathode: Fabrication, influence factors and mechanism

Heterogeneous electro-Fenton (E-F) is considered as an attractive technique for efficient removal of refractory organic pollutants in wastewater. The regeneration of Fe^II and catalyst reusability are key issues for effective and sustainable degradation. Developing binder-free iron phase/carbon composite cathode is a feasible strategy. In this work, the stable Ce/Fe-nanoporous carbon modified graphite felt electrode (Ce/Fe@NPC-GF) was fabricated using in situ solvothermal method and subsequent carbonization treatment, which worked as the cathode in a heterogeneous electro-Fenton system to degrade sulfamethoxazole. The electrocatalytic activity was significantly improved with doping of Ce. It was found that mesoporous Ce/Fe@NPC-GF cathode demonstrated high oxygen reduction activity and low resistance. The co-existence of Fe^Ⅱ/Fe^Ⅲ and Ce^Ⅲ/Ce^Ⅳ redox couples enhanced remarkably interfacial electron transfer, promoting in-situ H₂O₂ generation and decomposition, sequentially boosting the production of reactive radicals (·OH and ·O₂^-). Under 20 mA and pH 3, Sulfamethoxazole (SMX) was basically degraded in 120 min, and the removal rate was satisfactory in wide pH (2-6). After 8 cycles, the electrode could still maintain high stability and outstanding catalytic capacity. This work displayed a novel in-situ preparation method of composite cathode with excellent catalytic performance in E-F system, which offered inspiration for developing efficient heterogeneous electro-Fenton cathode material.

Accelerated Fe2+ Regeneration in an Effective Electro-Fenton Process by Boosting Internal Electron Transfer to a Nitrogen-Conjugated Fe(III) Complex

The regeneration rate of Fe²⁺ from Fe³⁺ dictates the performance of the electro-Fenton (EF) process, represented by the amount of produced hydroxyl radicals (·OH). Current strategies for the acceleration of Fe²⁺ regeneration normally require additional chemical reagents, to vary the redox potential of Fe²⁺/Fe³⁺. Here, we report an attempt at using the intrinsic property of the electrode to our advantage, i.e., nitrogen-doped carbon aerogel (NDCA), as a reducing agent for the regeneration of Fe²⁺ without using foreign reagents. Moreover, the pyrrolic N in NDCA provides unpaired electrons through the carbon framework to reduce Fe³⁺, while the graphitic and pyridinic N coordinate with Fe³⁺ to form a C-O-Fe-N₂ bond, facilitating electron transfer from both the external circuit and pyrrolic N to Fe³⁺. Our Fe²⁺/NDCA-EF system exhibits a 5.8 ± 0.3 times higher performance, in terms of the amount of generated ·OH, than a traditional Fenton system using the same Fe²⁺ concentration. In the subsequent reaction, the Fe²⁺/NDCA-EF system demonstrates 100.0% removal of dimethyl phthalate, 3-chlorophenol, bisphenol A, and sulfamethoxazole with a low specific energy consumption of 0.17-0.36 kW·h·g^-1. Furthermore, 90.1 ± 0.6% removal of dissolved organic carbon and 83.3 ± 0.9% removal of NH₃-N are achieved in the treatment of domestic sewage. The purpose of this work is to present a novel strategy for the regeneration of Fe²⁺ in the EF process and also to elucidate the role of different N species of the carbonaceous electrode in contributing to the redox cycle of Fe²⁺/Fe³⁺.

A fluorescence aptasensor for the sensitive detection of T-2 toxin based on FRET by adjusting the surface electric potentials of UCNPs and MIL-101

T-2 toxin is a class A trichothecene mycotoxin produced by Fusarium, which exhibits genotoxic, cytotoxic, and immunotoxic effects in animals and humans. In this study, we developed an aptasensor for the sensitive detection of T-2 toxin, which was based on fluorescence resonance energy transfer (FRET), and acted by adjusting the electric potential on the surface of upconversion nanoparticles (UCNPs) and MIL-101(Cr). In addition, it combined the excellent spectral properties of UCNPs with the good adsorption quenching abilities of metal organic frameworks (MOFs). Under the action of π-π stacking interactions, the UCNPs-aptamer was adsorbed onto the surface of MIL-101, leading to fluorescence quenching due to the occurrence of FRET. After the addition of T-2 toxin, owing to its selective binding to the UCNPs-aptamer, the UCNPs-aptamer moved away from MIL-101(Cr), resulting in fluorescence recovery. Moreover, the extent of fluorescence recovery was positively correlated with the concentration of T-2 toxin. The limit of detection (LOD) of this sensor was 0.087 ng mL^-1 (S/N = 3), and a good linear correlation was observed between the fluorescence intensity and the T-2 toxin concentration in the range of 0.1-100 ng mL^-1. Moreover, the recovery of this method was 97.52-109.53% for corn meal samples (relative standard deviation, RSD = 1.7-2.4%) and 90.81-100.02% for beer samples (RSD = 2.4-2.7%). By adjusting the surface electric potentials, the efficient fluorescence aptasensor combined the advantages of UCNPs and MIL-101(Cr) and allowed the first application of such a system in toxin detection, thereby indicating its potential food sample analysis and biochemical sensing.

Evolution of Singlet Oxygen by Activating Peroxydisulfate and Peroxymonosulfate: A Review

Advanced oxidation processes (AOPs) based on peroxydisulfate (PDS) or peroxymonosulfate (PMS) activation have attracted much research attention in the last decade for the degradation of recalcitrant organic contaminants. Sulfate (SO₄^•−) and hydroxyl (^•OH) radicals are most frequently generated from catalytic PDS/PMS decomposition by thermal, base, irradiation, transition metals and carbon materials. In addition, increasingly more recent studies have reported the involvement of singlet oxygen (¹O₂) during PDS/PMS-based AOPs. Typically, ¹O₂ can be produced either along with SO₄^•− and ^•OH or discovered as the dominant reactive oxygen species (ROSs) for pollutants degradation. This paper reviews recent advances in ¹O₂ generation during PDS/PMS activation. First, it introduces the basic chemistry of ¹O₂, its oxidation properties and detection methodologies. Furthermore, it elaborates different activation strategies/techniques, including homogeneous and heterogeneous systems, and discusses the possible reaction mechanisms to give an overview of the principle of ¹O₂ production by activating PDS/PMS. Moreover, although ¹O₂ has shown promising features such as high degradation selectivity and anti-interference capability, its production pathways and mechanisms remain controversial in the present literatures. Therefore, this study identifies the research gaps and proposes future perspectives in the aspects of novel catalysts and related mechanisms.

Recent advances on preparation and environmental applications of MOF-derived carbons in catalysis

Carbon materials derived from metal organic frameworks (MOFs) have excellent properties of high surface area, high porosity, adjustable pore size, high conductivity and stability, and their applications in catalysis have become a rapidly expanding research field. In this review, we have summarized the synthesis strategies of MOF-derived carbons with different physical and chemical properties, obtained through direct carbonization, co-pyrolysis and post-treatment. The potential applications of derived carbons, especially monometal-, bimetal-, nonmetal-doped and metal-free carbons in organo-catalysis, photocatalysis and electrocatalysis are analyzed in detail from the environmental perspective. In addition, the improvement of catalytic efficiency is also considered from the aspects of increasing active sites, enhancing the activity of reactants and promoting free electron transfer. The function and synergy of various species of the composites in the catalytic reaction are summarized. The reaction paths and mechanisms are analyzed, and research ideas or trends are proposed for further development.

Fenton/Fenton-like processes with in-situ production of hydrogen peroxide/hydroxyl radical for degradation of emerging contaminants: Advances and prospects

Fenton processes based on the reaction between Fe²⁺ and H₂O₂ to produce hydroxyl radicals, have been widely studied and applied for the degradation of toxic organic contaminants in wastewater due to its high efficiency, mild condition and simple operation. However, H₂O₂ is usually added by bulk feeding, which suffers from the potential risks during the storage and transportation of H₂O₂ as well as its low utilization efficiency. Therefore, Fenton/Fenton-like processes with in-situ production of H₂O₂ have received increasing attention, in which H₂O₂ was in-situ produced through O₂ activation, then decomposed into hydroxyl radicals by Fenton catalysts. In this review, the in situ production of H₂O₂ for Fenton oxidation was introduced, the strategies for activation of O₂ to generate H₂O₂ were summarized, including chemical reduction, electro-catalysis and photo-catalysis, the influencing factors and the mechanisms of the in situ production and utilization of H₂O₂ in various Fenton/Fenton-like processes were analyzed and discussed, and the applications of these processes for the degradation of toxic organic contaminants were summarized. This review will deepen the understanding of the tacit cooperation between the in situ production and utilization of H₂O₂ in Fenton process, and provide the further insight into this promising process for degradation of emerging contaminants in industrial wastewater.

Duet Fe3C and FeNx Sites for H2O2 Generation and Activation toward Enhanced Electro-Fenton Performance in Wastewater Treatment

Heterogeneous electro-Fenton (HEF) reaction has been considered as a promising process for real effluent treatments. However, the design of effective catalysts for simultaneous H₂O₂ generation and activation to achieve bifunctional catalysis for O₂ toward •OH production remains a challenge. Herein, a core-shell structural Fe-based catalyst (FeNC@C), with Fe₃C and FeN nanoparticles encapsulated by porous graphitic layers, was synthesized and employed in a HEF system. The FeNC@C catalyst presented a significant performance in degradation of various chlorophenols at various conditions with an extremely low level of leached iron. Electron spin resonance and radical scavenging revealed that •OH was the key reactive species and Fe^IV would play a role at neutral conditions. Experimental and density function theory calculation revealed the dominated role of Fe₃C in H₂O₂ generation and the positive effect of FeN_x sites on H₂O₂ activation to form •OH. Meanwhile, FeNC@C was proved to be less pH dependence, high stability, and well-recycled materials for practical application in wastewater purification.

Quasi-MOF derivative-based electrode for efficient electro-Fenton oxidation

Developing efficient and robust materials for emerging electrodegradation of organic pollutants has attracted broad interests. In this study, a novel controlled pyrolysis approach was employed to fabricate a quasi-MOF derivative-based electrode by pyrolyzing MIL-101(Fe) anchored on a polyaniline-modified carbon fiber paper at 400 °C. The construction of the accessible Fe-O sites, and the in situ generation of Fe₃O₄ nanoparticles with graphene-like carbon layers coated, would enhance the electro-Fenton activity of the electrode, which was used as the cathode. The results showed that 100 % of 50 mg L^-1 p-nitrophenol and 52 % total organic carbon were removed in 120 min under a current density of 5 mA cm^-2, suggesting that the prepared electrode had a more efficient mineralization current efficiency and less energy consumption compared with electrodes before pyrolysis. Notably, the stability of the electrode was greatly improved, maintaining its outstanding performance even after ten runs. The plausible reaction mechanism and degradation pathway were also proposed. This new pyrolysis strategy is expected to serve as a paradigm for designing efficient electrode in electro-Fenton remediation field.

Design and application of metal-organic frameworks and derivatives as heterogeneous Fenton-like catalysts for organic wastewater treatment: A review

Advanced oxidation process (AOP), with a high oxidation efficiency, fast reaction speed (relatively no secondary pollution), has become one of the core technologies of industrial wastewater and advanced drinking water treatment. Heterogeneous Fenton-like oxidation process (HFOP) is a kind of AOP, which developed rapidly in recent years in such a way to overcome the disadvantages of traditional Fenton reaction. Metal-organic frameworks (MOFs) and their derivatives become essential heterogeneous catalysts for organics mineralization due to the large specific surface area, abundant active sites, and ease of structural regulation. However, the knowledge gap on the mechanism and the fate of heterogeneous catalyst species during organics degradation activities by MOFs presents considerable impediments, particularly for a wide application and scaling up the process. This work has the potential to provide guidance and ideas for researchers and engineers in the fields of environmental remediation, environmental catalysis and functional materials. This review focuses on clarifying the critical mechanism of •OH production from MOFs and derivatives as well as its action on the organic's degradation process. The recent developments in MOF based HFOP are compared, and more attention is paid for the following aspects in this review: (1) classifies systematically progressive modification methods of MOFs by chemical and physical treatments; (2) analyzes the fate of catalytic species during treating organic wastewater; (3) proposes design ideas and principles for improving the performance of MOFs catalysts; (4) discusses the main factors influencing the catalytic properties and practical application; (5) summarizes the possible research challenges and directions for MOFs and their derivatives as catalysts applied to wastewater treatment in the future.