Toward a Unified Terminology of Processing Levels for Low-Cost Air-Quality Sensors

Evaluating the Performance of Using Low-Cost Sensors to Calibrate for Cross-Sensitivities in a Multipollutant Network

As part of our low-cost sensor network, we colocated multipollutant monitors containing sensors for particulate matter, carbon monoxide, ozone, nitrogen dioxide, and nitrogen monoxide at a reference field site in Baltimore, MD, for 1 year. The first 6 months were used for training multiple regression models, and the second 6 months were used to evaluate the models. The models produced accurate hourly concentrations for all sensors except ozone, which likely requires nonlinear methods to capture peak summer concentrations. The models for all five pollutants produced high Pearson correlation coefficients (r > 0.85), and the hourly averaged calibrated sensor and reference concentrations from the evaluation period were within 3-12%. Each sensor required a distinct set of predictors to achieve the lowest possible root-mean-square error (RMSE). All five sensors responded to environmental factors, and three sensors exhibited cross-sensitives to another air pollutant. We compared the RMSE from models (NO₂, O₃, and NO) that used colocated regulatory instruments and colocated sensors as predictors to address the cross-sensitivities to another gas, and the corresponding model RMSEs for the three gas models were all within 0.5 ppb. This indicates that low-cost sensor networks can yield useable data if the monitoring package is designed to comeasure key predictors. This is key for the utilization of low-cost sensors by diverse audiences since this does not require continual access to regulatory grade instruments.

Flexible Bayesian Ensemble Machine Learning Framework for Predicting Local Ozone Concentrations

3D-grid-based chemical transport models, such as the Community Multiscale Air Quality (CMAQ) modeling system, have been widely used for predicting concentrations of ambient air pollutants. However, typical horizontal resolutions of nationwide CMAQ simulations (12 × 12 km2) cannot capture local-scale gradients for accurately assessing human exposures and environmental justice disparities. In this study, a Bayesian ensemble machine learning (BEML) framework, which integrates 13 learning algorithms, was developed for downscaling CMAQ estimates of ozone daily maximum 8 h averages to the census tract level, across the contiguous US, and was demonstrated for 2011. Three-stage hyperparameter tuning and targeted validations were designed to ensure the ensemble model's ability to interpolate, extrapolate, and capture concentration peaks. The Shapley value metric from coalitional game theory was applied to interpret the drivers of subgrid gradients. The flexibility (transferability) of the 2011-trained BEML model was further tested by evaluating its ability to estimate fine-scale concentrations for other years (2012-2017) without retraining. To demonstrate the feasibility of using the BEML approach to strictly "data-limited" situations, the model was applied to downscale CMAQ outputs for a future-year scenario-based simulation that considers effects of variations in meteorology associated with climate change.

Air Quality Sensors Systems as Tools to Support Guidance in Athletics Stadia for Elite and Recreational Athletes

While athletes have high exposures to air pollutants due to their increased breathing rates, sport governing bodies have little guidance to support events scheduling or protect stadium users. A key limitation for this is the lack of hyper-local, high time-resolved air quality data representative of exposures in stadia. This work aimed to evaluate whether air quality sensors can describe ambient air quality in Athletics stadia. Sensing nodes were deployed in 6 stadia in major cities around the globe, monitoring NO₂, O₃, NO, PM₁₀, PM_2.5, PM₁, CO, ambient temperature, and relative humidity. Results demonstrated that the interpretation of hourly pollutant patterns, in combination with self-organising maps (SOMs), enabled the interpretation of probable emission sources (e.g., vehicular traffic) and of atmospheric processes (e.g., local vs. regional O formation). The ratios between PM size fractions provided insights into potential emission sources (e.g., local dust re-suspension) which may help design mitigation strategies. The high resolution of the data facilitated identifying optimal periods of the day and year for scheduling athletic trainings and/or competitions. Provided that the necessary data quality checks are applied, sensors can support stadium operators in providing athlete communities with recommendations to minimise exposure and provide guidance for event scheduling.

Calibration of CO, NO2, and O3 Using Airify: A Low-Cost Sensor Cluster for Air Quality Monitoring

During the last decade, extensive research has been carried out on the subject of low-cost sensor platforms for air quality monitoring. A key aspect when deploying such systems is the quality of the measured data. Calibration is especially important to improve the data quality of low-cost air monitoring devices. The measured data quality must comply with regulations issued by national or international authorities in order to be used for regulatory purposes. This work discusses the challenges and methods suitable for calibrating a low-cost sensor platform developed by our group, Airify, that has a unit cost five times less expensive than the state-of-the-art solutions (approximately €1000). The evaluated platform can integrate a wide variety of sensors capable of measuring up to 12 parameters, including the regulatory pollutants defined in the European Directive. In this work, we developed new calibration models (multivariate linear regression and random forest) and evaluated their effectiveness in meeting the data quality objective (DQO) for the following parameters: carbon monoxide (CO), ozone (O₃), and nitrogen dioxide (NO₂). The experimental results show that the proposed calibration managed an improvement of 12% for the CO and O₃ gases and a similar accuracy for the NO₂ gas compared to similar state-of-the-art studies. The evaluated parameters had different calibration accuracies due to the non-identical levels of gas concentration at which the sensors were exposed during the model’s training phase. After the calibration algorithms were applied to the evaluated platform, its performance met the DQO criteria despite the overall low price level of the platform.

User-Centred Design of a Final Results Report for Participants in Multi-Sensor Personal Air Pollution Exposure Monitoring Campaigns

Using low-cost portable air quality (AQ) monitoring devices is a growing trend in personal exposure studies, enabling a higher spatio-temporal resolution and identifying acute exposure to high concentrations. Comprehension of the results by participants is not guaranteed in exposure studies. However, information on personal exposure is multiplex, which calls for participant involvement in information design to maximise communication output and comprehension. This study describes and proposes a model of a user-centred design (UCD) approach for preparing a final report for participants involved in a multi-sensor personal exposure monitoring study performed in seven cities within the EU Horizon 2020 ICARUS project. Using a combination of human-centred design (HCD), human-information interaction (HII) and design thinking approaches, we iteratively included participants in the framing and design of the final report. User needs were mapped using a survey (n = 82), and feedback on the draft report was obtained from a focus group (n = 5). User requirements were assessed and validated using a post-campaign survey (n = 31). The UCD research was conducted amongst participants in Ljubljana, Slovenia, and the results report was distributed among the participating cities across Europe. The feedback made it clear that the final report was well-received and helped participants better understand the influence of individual behaviours on personal exposure to air pollution.

Assessment of Low-Cost Particulate Matter Sensor Systems against Optical and Gravimetric Methods in a Field Co-Location in Norway

The increased availability of commercially-available low-cost air quality sensors combined with increased interest in their use by citizen scientists, community groups, and professionals is resulting in rapid adoption, despite data quality concerns. We have characterized three out-the-box PM sensor systems under different environmental conditions, using field colocation against reference equipment. The sensor systems integrate Plantower 5003, Sensirion SPS30 and Alphasense OCP-N3 PM sensors. The first two use photometry as a measuring technique, while the third one is an optical particle counter. For the performance evaluation, we co-located 3 units of each manufacturer and compared the results against optical (FIDAS) and gravimetric (KFG) methods for a period of 7 weeks (28 August to 19 October 2020). During the period from 2nd and 5th October, unusually high PM concentrations were observed due to a long-range transport episode. The results show that the highest correlations between the sensor systems and the optical reference are observed for PM1, with coefficients of determination above 0.9, followed by PM2.5. All the sensor units struggle to correctly measure PM10, and the coefficients of determination vary between 0.45 and 0.64. This behavior is also corroborated when using the gravimetric method, where correlations are significantly higher for PM2.5 than for PM10, especially for the sensor systems based on photometry. During the long range transport event the performance of the photometric sensors was heavily affected, and PM10 was largely underestimated. The sensor systems evaluated in this study had good agreement with the reference instrumentation for PM1 and PM2.5; however, they struggled to correctly measure PM10. The sensors also showed a decrease in accuracy when the ambient size distribution was different from the one for which the manufacturer had calibrated the sensor, and during weather conditions with high relative humidity. When interpreting and communicating air quality data measured using low-cost sensor systems, it is important to consider such limitations in order not to risk misinterpretation of the resulting data.

Deliberating Performance Targets: Follow-on workshop discussing PM10, NO2, CO, and SO2 air sensor targets

The use of air sensor technology is increasing worldwide for a variety of applications, however, with significant variability in data quality. The United States Environmental Protection Agency held a workshop in July 2019 to deliberate possible performance targets for air sensors measuring particles with aerodynamic diameters of 10 μm or less (PM10), nitrogen dioxide (NO2), carbon monoxide (CO), and sulfur dioxide (SO2). These performance targets were discussed from the perspective of non-regulatory applications and with the sensors operating primarily in a stationary mode in outdoor environments. Attendees included representatives from multiple levels of government organizations, sensor developers, environmental nonprofits, international organizations, and academia. The workshop addressed the current lack of sensor technology requirements, discussed fit-for-purpose data quality needs, and debated transparency issues. This paper highlights the purpose and key outcomes of the workshop. While more information on performance and applications of sensors is available than in past years, the performance metrics, or parameters used to describe data quality, vary among the studies reports and there is a need for more clear and consistent approaches for evaluating sensor performance. Organizations worldwide are increasingly considering, or are in the process of developing, sensor performance targets and testing protocols. Workshop participants suggested that these new guidelines are highly desirable, would help improve data quality, and would give users more confidence in their data. Given the wide variety of uses for sensors and user backgrounds, as well as varied sensor design features (e.g., communication approaches, data tools, processing/adjustment algorithms and calibration procedures), the need for transparency was a key workshop theme. Suggestions for increasing transparency included documenting and sharing testing and performance data, detailing best practices, and sharing data processing and correction approaches.

Connecting Air Quality with Emotional Well-Being and Neighborhood Infrastructure in a US City

Cities in the United States have announced initiatives to become more sustainable, healthy, resilient, livable, and environmentally friendly. However, indicators for measuring all outcomes related to these targets and the synergies between them have not been well defined or studied. One such relationship is the linkage between air quality with emotional well-being (EWB) and neighborhood infrastructure. Here, regulatory monitoring, low-cost sensors (LCSs), and air quality modeling were combined to assess exposures to PM2.5 and traffic-related NOx in 6 Minneapolis, MN, neighborhoods of varying infrastructure parameters (median household income, urban vs suburban, and access to light rail). Residents of the study neighborhoods concurrently took real-time EWB assessments using a smart phone application, Daynamica, to gauge happiness, tiredness, stress, sadness, and pain. Both LCS PM2.5 observations and mobile-source-simulated NOx were calibrated using regulatory observations in Minneapolis. No statistically significant (α = 0.05) PM2.5 differences were found between urban poor and urban middle-income neighborhoods, but average mobile-source NOx was statistically significantly (α = 0.05) higher in the 4 urban neighborhoods than in the 2 suburban neighborhoods. Close proximity to light rail had no observable impact on average observed PM2.5 or simulated mobile-source NOx. Home-based exposure assessments found that PM2.5 was negatively correlated with positive emotions such as happiness and to net affect (the sum of positive and negative emotion scores) and positively correlated (ie, a higher PM2.5 concentration led to higher scores) for negative emotions such as tiredness, stress, sadness, and pain. Simulated mobile-source NOx, assessed from both home-based exposures and in situ exposures, had a near-zero relationship with all EWB indicators. This was attributed to low NOx levels throughout the study neighborhoods and at locations were the EWB-assessed activities took place, both owing to low on-road mobile-source NOx impacts. Although none of the air quality and EWB responses were determined to be statistically significant (α = 0.05), due in part to the relatively small sample size, the results are suggestive of linkages between air quality and a variety of EWB outcomes.