Integrated Flow-Electrode Capacitive Deionization and Microfiltration System for Continuous and Energy-Efficient Brackish Water Desalination

Direct Electrosynthesis and Separation Platform for Chlorine from Saline Water

Electrosynthesis of chlorine (Cl2) from seawater and natural and industrial brines emerges as a transformative approach for wastewater valorization while achieving water purification. However, the effective separation of chlorine from complex saline mixtures and the mitigation of environmental impacts from chlorine derivatives are two critical challenges to tackle. Here, we report a scalable electrosynthesis platform capable of producing and separating chlorine directly at a single three-phase interface, achieving up to 97% selectivity and nearly 100% separation efficiency. Employing a three-stacked modular electrolyzer, we successfully generated sodium hypochlorite solutions at concentrations of 0.53 and 5.1 wt % from real reverse osmosis retentate and seawater. The treated brine discharge met the stringent environmental standards for chlorine-based contaminants. Compared to ion exchange and electrodialysis, this upcycling and separation process has the potential to advance decentralized chlor-alkali production and nonpotable water generation. Additionally, it can be seamlessly integrated with direct or indirect electrochemical impure water splitting, eliminating low-value oxygen production, reducing the need for alkali additives, and addressing safety concerns such as hydrogen/oxygen crossover.

Exploring the potential of flow-electrode capacitive deionization for domestic and industrial wastewater treatment: a review

Flow-electrode capacitive deionization (FCDI) is an innovative approach for removing charged ions from untreated water, utilizing the interaction between ions and flow carbon electrodes. A review of recent publications on FCDI reveals a predominant focus on salt removal from water (desalination) and electro-sorption processes. Though desalination is just one step in improving the water quality, it is worthwhile looking at the research in the context of FCDI techniques that involve other water treatment methods. This paper offers a detailed review of recent literature on FCDI applications in wastewater treatment. Given the broad scope of wastewater treatment, the specific areas where FCDI shows promise, including removal of heavy metal and radioactive elements, organic micropollutant elimination, halogen removal, and resource recovery, are addressed. Additionally, we assess the current research landscape and propose potential future directions in this evolving field.

Simultaneous removal of tetracycline and copper ions from wastewater by flow-electrode capacitive deionization

ABSTRACTTo effectively solve the problem of tetracycline (TC) and Cu2+ contamination in wastewater, this study innovatively proposed a low-energy flow-electrode capacitive deionization (FCDI) technology to simultaneously remove TC and Cu2+ from wastewater. The removal efficiencies of TC and Cu2+ using FCDI was investigated under various voltages, electrode flow rates, influent flow rates, and electrode liquid concentrations. The results showed that the removal efficiency of TC and Cu2+ was 60.78% and 84.43%, respectively. The energy consumption for TC and Cu2+ removal was only 1.76 and 1.10 kWh kg-1, which was lower than other electrochemical systems. The ion removal performance of the FCDI system remained stable after six cycles of continuous operation. These findings demonstrated the promising potential of FCDI as an innovative technology for the simultaneous removal of TC and Cu2+, presenting a significant prospects for application in the water treatment field.

Utilizing an Integrated Flow Cathode-Membrane Filtration System for Effective and Continuous Electrochemical Hydrodechlorination

Pd-based electrodes are recognized to facilitate effective electrochemical hydrodechlorination (EHDC) as a result of their superior capacity for atomic hydrogen (H*) generation. However, challenges such as electrode stability, feasibility of treating complex matrices, and high cost associated with electrode synthesis hinder the application of Pd-based electrodes for EHDC. In this work, we investigated the feasibility of degrading 2,4-dichlorophenol (2,4-DCP) by EHDC employing Pd-loaded activated carbon particles, prepared via a simple wet-impregnation method, as a flow cathode (FC) suspension. Compared to other Pd-based EHDC studies, a much lower Pd loading (0.02-0.08 mg cm-2) was used. Because of the excellent mass transfer in the FC system, almost 100% 2,4-DCP was hydrodechlorinated to phenol within 1 h. The FC system also showed excellent performance in treating complex water matrices (including hardness ion-containing wastewater and various other chlorinated organics such as 2,4-dichlorobenzoic acid and trichloroacetic acid) with a relatively low energy consumption (0.26-1.56 kW h m-3 mg-1 of 2,4-DCP compared to 0.32-7.61 kW h m-3 mg-1 of 2,4-DCP reported by other studies). The FC synthesized here was stable over 36 h of continuous operation, indicating its potential suitability for real-world applications. Employing experimental investigations and mathematical modeling, we further show that hydrodechlorination of 2,4-DCP occurs via interaction with H*, with no role of direct electron transfer and/or HO•-mediated processes in the removal of 2,4-DCP.

Three-dimensional titanium mesh-based flow electrode capacitive deionization for salt separation and enrichment in high salinity water

Flow electrode capacitive deionization (FCDI) is a highly promising desalination technique known for its exceptional electrosorption capacity, making it suitable for efficient salt separation in high salinity water. However, the unsatisfactory charge transfer process between the flow electrode and current collector severely curtails the salt separation and enrichment performance of the FCDI device. To address this issue, three-dimensional titanium mesh (3D-TM) was proposed as a novel current collector for FCDI device, which significantly amplifies the charge transfer area and exhibits excellent salt separation performance. The 3D-TM current collector promotes the electron transfer, charge percolation, and ion migration processes through the electroconvection generated by the turbulence effect on the flow electrode. In the specific case of the 20-mesh 3D-TM, which is composed of 12 stacking layers of titanium mesh, the remarkable average salt removal rate and charge efficiency were achieved 5.06 μmol cm-2 min-1 and 92.9 % under an appropriate applied voltage of 2.0 V, respectively. Dramatically, the desalination performance maintained above 76.4 % over 100 desalination cycles at 2.0 V, demonstrating the exceptional cyclic stability of the 3D-TM FCDI cell. In the seawater desalination, the 3D-TM FCDI cell exhibited an impressive salt removal efficiency of 97.5 % (from 34.2 g L-1 to 0.84 g L-1) for 1 L East China seawater at 2.0 V for 24 h. For lithium-ion enrichment, the FCDI continuous desalting system achieved an astonishing concentration of 17.3 g L-1 for Li+ ions enrichment from an initial concentration of 1.30 g L-1, obtaining the average salt treating rate of 23.6 g m-2h-1 and charge efficiency of 80.0 %. Moreover, the lithium-sodium ions and lithium-magnesium ions enrichments were both conducted, yielding an enriched concentration of 10.4 g L-1 and 7.30 g L-1 for Li+ ions, respectively. These findings highlight the enormous potential of FCDI technology in industrial engineering applications, further establishing it as a highly viable solution.

Sustained Phosphorus Removal and Enrichment through Off-Flow Desorption in a Reservoir of Membrane Capacitive Deionization

In this study, we used a membrane capacitive deionization device with a reservoir (R-MCDI) to enrich phosphorus (P) from synthetic wastewater. This R-MCDI had two small-volume electrode chambers, and most of the electrolyte was contained in the reservoir, which was circulated along the electrode chambers. Compared with conventional MCDI, R-MCDI exhibited a phosphate removal rate of 0.052 μmol/(cm2·min), approximately double that of MCDI. This was attributed to R-MCDI's utilization of OH- alternative adsorption to remove phosphate from the influent. Noticing that around 73.9% of the removed phosphate was stored in the electrolyte in R-MCDI, we proposed a novel off-flow desorption operation to enrich the removed phosphate in the reservoir. Exciting results from the multicycle experiment (∼8 h) of R-MCDI showed that the PO43--P concentration in the reservoir increased all the way from the initial 152 mg/L to the final 361 mg/L, with the increase in the P charge efficiency from 5.5 to 22.9% and the decrease in the energy consumption from 28.2 to 6.8 kW h/kg P. The P recovery performance of R-MCDI was evaluated by viewing other similar studies, which revealed that R-MCDI in this study achieved superior P enrichment with low energy consumption and that the off-flow desorption proposed here considerably simplified the operation and enabled continuous P enrichment.

Simultaneous desalination and molecular resource recovery from wastewater using an electrical separation system integrated with a supporting liquid membrane

Separating molecular substances from wastewater has always been a challenge in wastewater treatment. In this study, we propose a new strategy for simultaneous desalination and selective recovery of molecular resources, by introducing a supported liquid membrane (SLM) with molecular selectivity into an asymmetric flow-electrode capacitive deionization. Salts and molecular substances in wastewater are removed after passing through the ion separation chamber and the molecular separation chamber, respectively. Faradaic reactions, i.e., the electrolysis of water with OH-, occurred in the electrochemical cathode electrode provides a sufficient and continuous chemical potential gradient for the cross-SLM transport of phenol (a model molecule substance). By optimizing the formulation of the liquid membrane and the pore size of the support membrane, we obtained the SLM with the best performance for separating phenol. In continuous experiment tests, the electrochemical membrane system showed stable separation performance and long-term stability for simultaneous salts removal and phenol (sodium phenol) recovery from wastewater. Finally, we demonstrate the potential application of this technology for the recovery of different carbon resources. Overall, the electrochemical system based on SLM is suitable for various wastewater treatment needs and provides a new approach for the recovery of molecular resources in wastewater.

A Novel Integrated Flow-Electrode Capacitive Deionization and Flow Cathode System for Nitrate Removal and Ammonia Generation from Simulated Groundwater

Electrochemical reduction of nitrate is a promising method for the removal of nitrate from contaminated groundwater. However, the presence of hardness cations (Ca2+ and Mg2+) in groundwaters hampers the electroreduction of nitrate as a result of the precipitation of carbonate-containing solids of these elements on the cathode surface. Thus, some pretreatment process is required to remove unwanted hardness cations. Herein, we present a proof-of-concept of a novel three-chambered flow electrode unit, constituting a flow electrode capacitive deionization (FCDI) unit and a flow cathode (FC) unit, which achieves cation removal, nitrate capture and reduction, and ammonia generation in a single cell without the need for any additional chemicals/electrolyte. The addition of the FCDI unit not only achieves removal of hardness cations but also concentrates the nitrate ions and other anions, which facilitates nitrate reduction in the subsequent FC unit. Results show that the FCDI cell voltage influences electrode stability but has a minimal impact on the overall nitrate removal performance. The concentration of coexisting anions influences the nitrate removal due to competitive sorption of anions on the electrode surface. Our results further show that stable electrochemical performance was obtained over 26 h of operation. Overall, this study provides a scalable strategy for continuous nitrate electroreduction and ammonia generation from nitrate contaminated groundwaters containing hardness ions.

Electron Transfer of Activated Carbon to Anode Excites and Regulates Desalination in Flow Electrode Capacitive Deionization

The desalination performance of flow electrode capacitive deionization (FCDI) is determined by the ion adsorption on the powdered activated carbon (PAC) and the electron transfer between the current collector and PAC. However, a comprehensive understanding of rate-limiting steps is lacking, let alone to enhance FCDI desalination by regulating the PAC characteristics. This study showed that the electron transfer between PAC and the current collector on the anode side was the rate-limiting step of FCDI desalination. Compared with W900, the desalination performance of FCDI decreased by 95% when W1200 with weak electron transfer ability was used as a flow electrode. The PAC selected in this study transferred electrons directly through the conductive carbon matrix in FCDI and was mainly affected by graphitization. The desalination performance of FCDI was improved by 20 times when the graphitization degree of PAC increased from 0.69 to 1.03. The minimum energy required for electrons to escape from the PAC surface was reduced by the high degree of graphitization, from 4.27 to 3.52 eV, thus improving the electron transfer capacity of PAC on the anode side. This study provides a direction for the optimization of flow electrodes and further promotes the development of FCDI.

Electrochemical Reduction of Nitrate with Simultaneous Ammonia Recovery Using a Flow Cathode Reactor

The presence of excessive concentrations of nitrate in industrial wastewaters, agricultural runoff, and some groundwaters constitutes a serious issue for both environmental and human health. As a result, there is considerable interest in the possibility of converting nitrate to the valuable product ammonia by electrochemical means. In this work, we demonstrate the efficacy of a novel flow cathode system coupled with ammonia stripping for effective nitrate removal and ammonia generation and recovery. A copper-loaded activated carbon slurry (Cu@AC), made by a simple, low-cost wet impregnation method, is used as the flow cathode in this novel electrochemical reactor. Use of a 3 wt % Cu@AC suspension at an applied current density of 20 mA cm^-2 resulted in almost complete nitrate removal, with 97% of the nitrate reduced to ammonia and 70% of the ammonia recovered in the acid-receiving chamber. A mathematical kinetic model was developed that satisfactorily describes the kinetics and mechanism of the overall nitrate electroreduction process. Minimal loss of Cu to solution and maintenance of nitrate removal performance over extended use of Cu@AC flow electrode augers well for long-term use of this technology. Overall, this study sheds light on an efficient, low-cost water treatment technology for simultaneous nitrate removal and ammonia generation and recovery.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Indirect charging of carbon by aqueous redox mediators contributes to the enhanced desalination performance in flow-electrode CDI

Reversible electrochemical separation based on flow electrodes (e.g., flow-electrode capacitive deionization (FCDI)) is promising to desalinate brackish water, a reliable alternative source of freshwater. The deployment of redox mediators (RMs) in FCDI offers an energy-efficient means to improve the process performance, but the nature of the RMs-mediated charge transfer remains poorly understand. We therefore systematically investigated commonly-used RMs including sodium anthraquinone-2-sulfonate (AQS), 4-hydroxy-2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO), hydroquinone (HQ) and ferricyanide ([Fe(CN)₆]^3-). Results showed that the desalination rate could be increased by over 260% with the addition of 10 mM [Fe(CN)₆]^3-. The lowest efficiency of AQS among the RMs should be ascribed to its reduction potential of -0.84 V (vs. Ag/AgCl) exceeding the potential (-0.48 V) of the negatively charged current collector at 1.2 V. While aqueous TEMPO and HQ could facilitate salt removal, their loss of efficiencies upon sorption onto the carbon surface indicated the insignificant pseudocapacitive contribution to ion migration. In-situ cyclic voltammetry measurements demonstrated the crucial role of the indirect charging of the flowable carbon materials to enhance the desalination performance in RMs-mediated FCDI. To sum up, results of this work pave a way to understand the RMs-mediated charge transfer and ion migration in FCDI, which would serve the purpose of design and optimization of the flow electrode systems for wider environmental applications.

Flow-electrode capacitive deionization utilizing three-dimensional foam current collector for real seawater desalination

The three-dimensional (3D) carbon coated nickel foam was utilized as current collector in a flow-electrode capacitive deionization (CF-FCDI) device to strengthen the charge transfer ability of FCDI device, achieving distinguished desalination efficiency for real seawater. Utilizing 30 ppi carbon coated nickel foam as current collector with 12.5 wt% AC content at 1.2 V to treat 3.5 g L^-1 NaCl solution, the CF-FCDI achieved 99.8% of salt removal efficiency (SRE), 3.29 µmol cm^-2 min^-1 of average salt removal rate (ASRR) and 97.0% of charge efficiency (CE), surpassing most desalination performances in previous reports. Compared with the titanium mesh (TM-FCDI) and graphite plate (GP-FCDI) current collector, the three-dimensional electric field and computational fluid dynamics (CFD) simulations demonstrated that 3D foam current collector has obvious stronger competitiveness. Its intrinsic 3D interconnected open-pore structure as flow channel and 3D electric field could not only enlarge the charge contact area between the current collector and flow-electrode, but also eliminate the restriction of 0.75 mm effective charging range within the carbon slurry in traditional serpentine flow channels. Finally, the excellent desalination performance of CF-FCDI device was also verified by treating simulated seawater, real seawater samples from Yellow Sea and South China Sea with a high SRE of 99.9%, 99.8%, and 99.9%, respectively. This work introduced a new strategy for enhancing charge transfer ability and overall desalination efficiency of FCDI device by utilizing a novel 3D foam-structured current collector for real seawater desalination.

Simultaneous Fractionation, Desalination, and Dye Removal of Dye/Salt Mixtures by Carbon Cloth-Modified Flow-electrode Capacitive Deionization

The critical challenges of using electromembrane processes [e.g., electrodialysis and flow-electrode capacitive deionization (FCDI)] to recycle resources (e.g., water, salts, and organic compounds) from wastewater are the fractionation of dissolved ionic matter, the removal/recovery of organic components during desalination, and membrane antifouling. This study realized the simultaneous fractionation, desalination, and dye removal/recovery (FDR) treatment of dye/salt mixtures through a simple but effective approach, that is, using a carbon cloth-modified FCDI (CC-FCDI) unit, in which the carbon cloth layer was attached to the surface of each ion-exchange membrane (IEM). The IEMs and carbon-based flow-electrodes were responsible for the fractionation and desalination of dye and salt ions, while the carbon cloth layers contributed to the active membrane antifouling and dye removal/recovery by the electrosorption mechanism. Attributed to such features, the CC-FCDI unit accomplished the effective FDR treatment of dye/salt mixtures with wide ranges of salt and dye concentrations (5-20 g L^-1 NaCl and 200-800 ppm methylene blue) and different dye components (cationic and anionic dyes) under various applied voltages (1.2-3.2 V). Moreover, the active membrane antifouling by virtue of the carbon cloth facilitated the excellent and sustainable FDR performance of CC-FCDI. The removal/recovery of dyes from the carbon cloth strongly depends on the characteristics of dye molecules, the surface properties of the carbon cloth, and the local pH at the IEM/CC interfaces. This study sheds light on the strategies of using multifunctional layer-modified FCDI units to reclaim resources from various high-salinity organic wastewater.

Enhancing Brackish Water Desalination using Magnetic Flow-electrode Capacitive Deionization

Flow-electrode capacitive deionization (FCDI) is viewed as a potential alternative to the current state-of-the-art electrodriven technology for the desalination of brackish water. However, the key shortcoming of the FCDI is still the discontinuous nature of the electrode conductive network, resulting in low electron transport efficiency and ion adsorption capacity. Here, a novel magnetic field-assisted FCDI system (termed magnetic FCDI) is proposed to enhance brackish water desalination, simply by using magnetic activated carbon (MAC) as flow electrodes. The results show that the assistance from the magnetic field enables a 78.9% - 205% enhancement in the average salt removal rate (ASRR) compared with that in the absence of a magnetic field, which benefits from the artificial manipulation of the flow electrode transport behavior. In long-term tests, the stable desalination performance of magnetic FCDI was also demonstrated with a stable ASRR of 0.70 μmol cm^-2 min^-1 and energy-normalized removed salt (ENRS) of 8.77 μmol J^-1. In addition, magnetic field also enables the regeneration of the electrode particles from the concentrated electrolyte. In summary, the findings indicate that the magnetic FCDI is an energy-efficient and operation convenient technology for brackish water desalination.

Membrane-Current Collector-Based Flow-Electrode Capacitive Deionization System: A Novel Stack Configuration for Scale-Up Desalination

The stack configuration in flow-electrode capacitive deionization (FCDI) has been verified to be an attractive and feasible strategy for scaling up the desalination process. However, challenges still exist when attempting to simultaneously improve the desalination scale and the cell configuration. Here, we describe a novel stack FCDI configuration (termed a gradient FCDI system) based on a membrane-current collector assembly, in which the charge neutralization enables the in situ regeneration of the flow electrodes in the single cycle operation, thereby realizing a considerable increase in the desalinating performance. By evaluating standardized metrics such as the salt rejection, productivity (P), average salt removal rate (ASRR), energy-normalized removed salt (ENRS), and TEE, the results indicated that the gradient FCDI system could be a performance-stable and energy-efficient alternative for scale-up desalination. Under optimal operating conditions (carbon content = 10 wt %, feed salinity = 3000 mg L^-1, cell voltage = 1.2 V, and productivity = 56.7 L m^-2 h^-1), the robust desalination performance (ASRR = 1.07 μmol cm^-2 min^-1) and energy consumption (ENRS = 7.8 μmol J^-1) of the FCDI system with a desalination unit number of four were verified at long-term operation. In summary, the stacked gradient FCDI system and its operation mode described here may be an innovative and promising strategy capable of enlarging the scale of desalination while realizing performance improvement and device simplification.

In situ potential measurement in a flow-electrode CDI for energy consumption estimation and system optimization

Flow electrode capacitive deionization (FCDI) is a promising electrochemical technique for brackish water desalination; however, there are challenges in estimating the distribution of resistance and energy consumption inside a FCDI system, which hinders the optimization of the rate-limiting compartment. In this study, energy consumption of each FCDI component (e.g., flow electrodes, membranes and desalination chamber) was firstly described by using in situ potential measurement (ISPM). Results of this study showed that the energy consumption (EC) of the flow electrodes dominated under most conditions. While an increase in the carbon black content in the flow electrodes could improve the energy efficiency of the electrode component, consideration should be given to the contribution of ion exchange membranes (IEMs) and the desalination chamber to the EC. Based on the above analysis, system optimization was carried out by introducing IEMs with relatively low resistance and/or packing the desalination chamber with titanium meshes. Results showed that the voltage-driven desalination capability was increased by 39.3% with the EC reduced by 17.5% compared to the control, which overcame the tradeoff between the kinetic and energetic efficiencies. Overall, the present work facilitates our understanding of the potential drops across an FCDI system and provides insight to the optimization of system design and operation.

Scale-up and Modelling of Flow-electrode CDI Using Tubular Electrodes

A novel design for a flow-electrode capacitive deionization (FCDI) system consisting of tubular electrodes in a shell and tube heat exchanger configuration is proposed. Each electrode consists of a metallic mesh current collector along the inner circumference of a tubular ion-exchange membrane. This tubular FCDI design is suitable for scale-up as it consists of easily manufactured components which can be assembled in an array. An apparatus with 4 tubular electrodes with a large effective area (202.3 cm²) was constructed and shown to provide a high net salt (NaCl) removal rate (0.15 mg s^-1 at 1.2 V applied voltage and ∼2000 mg L^-1 influent total dissolved solids concentration). A computational fluid dynamics (CFD) model incorporating ion migration and transport mechanisms was developed to simulate the ion concentration and electrical potential profiles in the water channel. The results of CFD modelling highlighted the need to maximize regions of both high potential gradient and high hydraulic flow in order to achieve optimal salt removal. In brief, this study presents a new design approach for FCDI scale-up and provides a computational tool for optimization of this design and future innovative FCDI designs.

Pharmaceutical removal at low energy consumption using membrane capacitive deionization

The performance of the membrane capacitive deionization (MCDI) system was evaluated during the removal of three selected pharmaceuticals, neutral acetaminophen (APAP), cationic atenolol (ATN), and anionic sulfamethoxazole (SMX), in batch experiments (feed solution: 2 mM NaCl and 0.01 mM of each pharmaceutical). Upon charging, the cationic ATN showed the highest removal rate of 97.65 ± 1.71%, followed by anionic SMX (93.22 ± 1.66%) and neutral APAP (68.08 ± 5.24%) due to the difference in electrostatic charge and hydrophobicity. The performance parameters (salt adsorption capacity, specific capacity, and cycling efficiency) and energy factors (specific energy consumption and recoverable energy) were further evaluated over ten consecutive cycles depending on the pharmaceutical addition. A significant decrease in the specific adsorption capacity (from 24.6 to ∼3 mg-NaCl g^-1) and specific capacity (from 17.6 to ∼2.5 mAh g^-1) were observed mainly due to the shortened charging and discharging time by pharmaceutical adsorption onto the electrode. This shortened charging time also led to an immediate drop in specific energy consumption from 0.41 to 0.04 Wh L^-1. Collectively, these findings suggest that MCDI can efficiently remove pharmaceuticals at a low energy demand; however, its performance changes dramatically as the pharmaceuticals are present in the target water.

Flow-electrode capacitive deionization: A review and new perspectives

Flow-electrode capacitive deionization (FCDI), as a novel electro-driven desalination technology, has attracted growing exploration towards brackish water treatment, hypersaline water treatment, and selective resource recovery in recent years. As a flow-electrode-based electrochemical technology, FCDI has similarities with several other electrochemical technologies such as electrochemical flow capacitors and semi-solid fuel cells, whose performance are closely coupled with the characteristics of the flow-electrodes. In this review, we sort out the potentially parallel mechanisms of electrosorption and electrodialysis in the FCDI desalination process, and make clear the importance of the flowable capacitive electrodes. We then adopt an equivalent circuit model to distinguish the resistances to ion transport and electron transport within the electrodes, and clarify the importance of electronic conductivity on the system performance based on a series of electrochemical tests. Furthermore, we discuss the effects of electrode selection and flow circulation patterns on system performance (energy consumption, salt removal rate), review the current treatment targets and system performance, and then provide an outlook on the research directions in the field to support further applications of FCDI.

Electrochemical Ammonia Recovery from Anaerobic Centrate Using a Nickel-Functionalized Activated Carbon Membrane Electrode

Ammonia (NH₃) recovery from used water (previously wastewater) is highly desirable to depart from fossil fuel-dependent NH₃ production and curb nitrogen emission to the environment. Electrochemical NH₃ recovery is promising since it can simply convert aqueous NH₄⁺ to gaseous NH₃ using cathodic reactions (OH^- generation). However, the use of a separated electrode and membrane imposes high resistances to the cathodic reaction and NH₃ transfer. This study examined an activated carbon (AC)-based membrane electrode functionalized with nickel to electrochemically recover NH₃ from synthetic anaerobic centrate. The membrane electrode was fabricated using nickel-adsorbed AC powder and a polyvinylidene fluoride (PVDF) binder, and the PVDF membrane layer was formed at the electrode surface by phase inversion. The NH₃-N recovery flux of 50.3 ± 0.4 gNH₃-N/m²/d was produced at 17.1 A/m² with a recovery solution at pH 7, and NH₃-N fluxes and energy consumptions were improved as the recovery solution became acidic (62.2 ± 2.1 gNH₃-N/m²/d with 16.0 ± 1.6 kWh/kgNH₃-N at pH 2). Increasing PVDF loadings did not impact the electrochemical performances of the Ni/AC-PVDF electrode, but slightly lower (7%) NH₃-N fluxes were obtained with higher PVDF loadings. Ni dissolution (3.7-6.0% loss) was affected by the recovery solution pH, but it did not impact the performances over the cycles.

Separation, anti-fouling, and chlorine resistance of the polyamide reverse osmosis membrane: From mechanisms to mitigation strategies

Membrane technology has been widely used in the wastewater treatment and seawater desalination. In recent years, the reverse osmosis (RO) membrane represented by polyamide (PA) has made great progress because of its excellent properties. However, the conventional PA RO membranes still have some scientific problems, such as membrane fouling, easy degradation after chlorination, and unclear mechanisms of salt retention and water flux, which seriously impede the widespread use of RO membrane technology. This paper reviews the progress in the research and development of the RO membrane, with key focus on the mechanisms and strategies of the contemporary separation, anti-fouling and chlorine resistance of the PA RO membrane. This review seeks to provide state-of-the-art insights into the mitigation strategies and basic mechanisms for some of the key challenges. Under the guidance of the fundamental understanding of each mechanism, operation and modification strategies are discussed, and reasonable analysis is carried out, which can address some key technical challenges. The last section of the review focuses on the technical issues, challenges, and future perspective of these mechanisms and strategies. Advances in synergistic mechanisms and strategies of the PA RO membranes have been rarely reviewed; thus, this review can serve as a guide for new entrants to the field of membrane water treatment and established researchers.

Flow Electrode Capacitive Deionization (FCDI): Recent Developments, Environmental Applications, and Future Perspectives

With the increasing severity of global water scarcity, a myriad of scientific activities is directed toward advancing brackish water desalination and wastewater remediation technologies. Flow-electrode capacitive deionization (FCDI), a newly developed electrochemically driven ion removal approach combining ion-exchange membranes and flowable particle electrodes, has been actively explored over the past seven years, driven by the possibility of energy-efficient, sustainable, and fully continuous production of high-quality fresh water, as well as flexible management of the particle electrodes and concentrate stream. Here, we provide a comprehensive overview of current advances of this interesting technology with particular attention given to FCDI principles, designs (including cell architecture and electrode and separator options), operational modes (including approaches to management of the flowable electrodes), characterizations and modeling, and environmental applications (including water desalination, resource recovery, and contaminant abatement). Furthermore, we introduce the definitions and performance metrics that should be used so that fair assessments and comparisons can be made between different systems and separation conditions. We then highlight the most pressing challenges (i.e., operation and capital cost, scale-up, and commercialization) in the full-scale application of this technology. We conclude this state-of-the-art review by considering the overall outlook of the technology and discussing areas requiring particular attention in the future.

Phosphate recovery as vivianite using a flow-electrode capacitive desalination (FCDI) and fluidized bed crystallization (FBC) coupled system

It is critical to both effectively remove and recover phosphate (P) from wastewater given the wide-ranging environmental (i.e., preventing eutrophication and restoring water quality) and economic (i.e., overcoming P resource scarcity) benefits. More recently, considerable academic effort has been devoted towards harvesting P as vivianite, which can be used as a potential slow-release fertilizer and possible reagent for the manufacture of lithium iron phosphate (LiFePO₄), the precursor in fabricating Li-ion secondary batteries. In this study, we propose an innovative P recovery process, in which P is first preconcentrated via a flow-electrode capacitive deionization (FCDI) device followed by immobilization as vivianite crystals in a fluidized bed crystallization (FBC) column. The effects of different operational parameters on FCDI P preconcentration performance and energy consumption are investigated. Results show that 63% of P can be removed and concentrated in the flow-electrode chamber with a reasonable energy requirement under optimal operating conditions. The FBC system resulted in immobilization of ~80% of P as triangular or quadrangular pellets, which were verified to be high-purity vivianite crystals by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) and extended X-ray absorption fine structure (EXAFS) spectroscopy. This study provides a pathway for efficient recovery of P as a value-added product (i.e., vivianite) from P-rich wastewaters.

Capacitive Removal of Heavy Metal Ions from Wastewater via an Electro-Adsorption and Electro-Reaction Coupling Process

Heavy metals widely exist in wastewater, which is a serious threat to human health or water environment. Highly efficient removal of heavy metal ions from wastewater is a major challenge to wastewater treatment. In this work, capacitive removal of heavy metal ions from wastewater via an electro-adsorption and electro-reaction coupling process was originally demonstrated. The removal efficiency of heavy metal ions in the binary-component solutions containing metal nitrate (10 mg/L) and NaCl (100 mg/L) can reach 99%. Even the removal efficiency of heavy metal ions can be close to 99% in the multi-component solution containing all the seven metal nitrates (10 mg/L for each) and 100 mg/L NaCl. Meanwhile, the electro-adsorption and electro-reaction coupling process maintained excellent regeneration ability even after 20 cycles. Furthermore, the heavy metal ions removal mechanism was proven to be the pseudocapacitive intercalation of heavy metal ions into the layered structure of the employed W₁₈O₄₉/graphene in the electro-adsorption and electro-reaction coupling process. This work demonstrates great potential for general applicability to wastewater treatment.

Phosphate selective recovery by magnetic iron oxide impregnated carbon flow-electrode capacitive deionization (FCDI)

The recovery of phosphorus (P) from wastewaters is a worthy goal considering the potential environmental and economic benefits. Flow-electrode capacitive deionization (FCDI), which employs flowable carbon electrodes instead of the static electrodes used in conventional CDI, has been demonstrated to be a promising P recovery technology. FCDI outperforms CDI and other competitive technologies in a number of aspects including (i) large salt adsorption capacity and (ii) extremely high water recovery rate. In this study, magnetic (Fe₃O₄ impregnated) activated carbon particles were prepared and applied as FCDI electrodes. The magnetic carbon electrodes were found to have a strong affinity towards P, facilitating the selective adsorption of P to the magnetic particles through a ligand exhange mechanism. Continuous operation of the FCDI system could be achieved with only three minutes required to separate the electrode particles from the brine stream on application of an external magnetic field. A P-rich stream was produced on regeneration of the exhausted magnetic electrodes using alkali solution. We envision that the use of magnetic carbon enhanced flow-electrodes will pave the way for efficient operation of FCDI as well as the preferential recovery of P.

Can flow-electrode capacitive deionization become a new in-situ soil remediation technology for heavy metal removal?

In this study, we present a novel soil electrochemical remediation technology (called S-FCDI), which is based on flow-electrode capacitive deionization (FCDI), for Cd removal from kaolin while under continuous operation mode. The results demonstrated that Cd can be effectively removed from kaolin with reasonable energy consumption and minimal macroelement loss. The carboxylic (OOH) functional groups on the surface of activated carbon (AC) facilitated the transfer of Cd from kaolin onto carbon surface. A stable acidic environment, which is advantageous for continuous Cd desorption, was achieved as a result of the balance between H⁺ generation and transmembrane migration. Once these net negative charges on the particle were eliminated or reversed, the adsorbed Cd could be released easily and driven in concentrated stream by electrostatic repulsion. Under the optimal operating conditions (i.e., carbon =50 g/L, j = 3.47 A/m², pH_i = 3.2, [NaCl]_a =8.6 mmol/L), more than 80 % Cd was removed from (200 g) kaolin after continuous 19 h operation at a relatively low electricity consumption of 22.7 kW h/kg Cd and a limited Al loss of 0.06 wt‰. These results from this work demonstrated that S-FCDI could be an alternative soil electrochemical remediation technology for heavy metal removal with low soil damage.

A review on facilitating bio-wastes degradation and energy recovery efficiencies in anaerobic digestion systems with biochar amendment

In this review, progress in the potential mechanisms of biochar amendment for AD performance promotion was summarized. As adsorbents, biochar was beneficial for alleviating microbial toxicity, accelerating refractory substances degradation, and upgrading biogas quality. The buffering capacity of biochar balanced pH decreasing caused by volatile fatty acids accumulation. Moreover, biochar regulated microbial metabolism by boosting activities, mediating electron transfer between syntrophic partners, and enriching functional microbes. Recent studies also suggested biochar as potential useful additives for membrane fouling alleviation in anaerobic membrane bioreactors (AnMBR). By analyzing the reported performances based on different operation models or substrate types, debatable issues and associated research gaps of understanding the real role of biochar in AD were critically discussed. Accordingly, Future perspectives of developing biochar-amended AD technology for real-world applications were elucidated. Lastly, with biochar-amended AD as a core process, a novel integrated scheme was proposed towards high-efficient energy-resource recovery from various bio-wastes.

Water Desalination by Flow-Electrode Capacitive Deionization in Overlimiting Current Regimes

Since flow-electrodes do not have a maximum allowable charge capacity, a high salt removal rate in flow-electrode capacitive deionization (FCDI) can be achieved theoretically by simply increasing the applied voltage. However, present attempts to run FCDI at high voltages are unsatisfactory because of the instability of the module occurring in the overlimiting current regimes. To implement FCDI in the overlimiting current regimes (namely, OLC-FCDI), in this work, we analyzed the voltage-current (V-I) characteristics of several FCDI units. We confirmed that a continuous, rapid, and stable desalination performance of OLC-FCDI can be attained when the employed FCDI unit possesses a linear V-I characteristic (only one ohmic regime), which is distinct from the three V-I regimes in electrodialysis (ohmic, limiting current, and water splitting regimes) and the two in membrane capacitive deionization (ohmic and water splitting regimes). Notably, the linearV-I characteristic of FCDI requires continuous charge percolation near the boundaries of ion-exchange membranes. Effective methods include increasing the carbon content in the flow-electrodes and introducing electrical (carbon cloth) or ionic (ion-exchange resins) conductive intermediates in the solution compartment, which result in corresponding upgraded FCDI units exhibiting extremely high salt removal rates (>100 mg m^-2 s^-1), good cycling stability, and rapid seawater desalination performance under typical OLC-FCDI operation condition (27-40 g L^-1 NaCl, 500 mA). This study can guide future research of FCDI in terms of flow-electrode preparation and device configuration optimization.

Evaluation of long-term performance of a continuously operated flow-electrode CDI system for salt removal from brackish waters

While flow-electrode capacitive deionization (FCDI), one of the most popular CDI variants, possesses a number of advantages over conventional fixed-electrode CDI (e.g., large salt adsorption capacity, high flow efficiency and convenient management of the electrodes), challenges remain in constructing and operating an FCDI system such that it can operate continuously. Here we achieve effective continuous removal of salt from a brackish feed stream using flowing carbon electrodes which are regenerated in a closed-loop manner by using our previously introduced integrated FCDI/MF strategy. The performance of the FCDI/MF system is characterized over a two week period of operation with key factors influencing the desalination performance identified. Results show that the FCDI/MF system is capable of continuously desalinating brackish water (∼2 g L^-1) to portable levels (<0.5 g L^-1) whilst sustaining an extraordinary water recovery rate (∼92%) and relatively low energy consumption (∼0.5 kWh m^-3). No obvious deterioration in performance or membrane fouling was observed during the 14-day operation. While the carbon particles used in the flow electrode exhibited only a minor increase in oxygen-containing groups over the 14 days of operation, a significant reduction in particle size was observed, likely as a consequence of the high-frequency collisions and associated friction between particles that occurred in the FCDI/MF system. Further studies regarding flowable electrode optimization, cell configuration design and process modelling are needed in order to realize the scale-up and practical implementation of this emerging technology.

Energy Efficiency of Electro-Driven Brackish Water Desalination: Electrodialysis Significantly Outperforms Membrane Capacitive Deionization

Electro-driven technologies are viewed as a potential alternative to the current state-of-the-art technology, reverse osmosis, for the desalination of brackish waters. Capacitive deionization (CDI), based on the principle of electrosorption, has been intensively researched under the premise of being energy efficient. However, electrodialysis (ED), despite being a more mature electro-driven technology, has yet to be extensively compared to CDI in terms of energetic performance. In this study, we utilize Nernst-Planck based models for continuous flow ED and constant-current membrane capacitive deionization (MCDI) to systematically evaluate the energy consumption of the two processes. By ensuring equivalently sized ED and MCDI systems-in addition to using the same feed salinity, salt removal, water recovery, and productivity across the two technologies-energy consumption is appropriately compared. We find that ED consumes less energy (has higher energy efficiency) than MCDI for all investigated conditions. Notably, our results indicate that the performance gap between ED and MCDI is substantial for typical brackish water desalination conditions (e.g., 3 g L^-1 feed salinity, 0.5 g L^-1 product water, 80% water recovery, and 15 L m^-2 h^-1 productivity), with the energy efficiency of ED often exceeding 30% and being nearly an order of magnitude greater than MCDI. We provide further insights into the inherent limitations of each technology by comparing their respective components of energy consumption, and explain why MCDI is unable to attain the performance of ED, even with ideal and optimized operation.

Carbon Black Flow Electrode Enhanced Electrochemical Desalination Using Single-Cycle Operation

Flow-electrode electrochemical desalination (FEED) processes (e.g., flow-electrode capacitive deionization), which use flowable carbon particles as the electrodes, have attracted increasing attention, holding the promise for continuous desalination and high desalting efficiency. While it is generally believed that carbon particles with abundant microporous and large specific capacitances (e.g., activated carbon, AC) should be ideal candidates for FEED electrodes, we provide evidence to the contrary, showing that highly conductive electrodes with low specific surface area can outperform microporous AC-based electrodes. This study revealed that FEED using solely high surface area AC particles (∼2000 m² g^-1, specific capacitance of ∼44 F g^-1, average salt adsorption rate of ∼0.15 μmol cm^-2 min^-1) was vastly outperformed by electrodes based solely on low-surface area carbon black (CB, ∼70 m² g^-1, ∼0.5 F g^-1, ∼0.75 μmol cm^-2 min^-1). Electrochemical impedance spectroscopy results suggest that the electrode formed by CB particles led to more effective electronic charge percolation, likely contributing to the improved desalination performance. In addition, we propose and demonstrate a novel operation mode, termed single cycle (SC), which greatly simplified the FEED cell configuration and enabled simultaneous charging and discharging. Using SC mode with CB flow electrodes delivered an increased average salt removal rate relative to the more traditional short-circuited closed cycle (SCC) mode, achieving up to 1.13 μmol cm^-2 min^-1. Further investigations demonstrate that up to 50% of energy input would be avoided when using CB flow electrodes operated under SC mode as compared to that of AC flow electrodes operated under SCC mode. In summary, the FEED process presented in this study provided an innovative and promising approach toward high-efficient and low-cost brackish water desalination.