A Novel Approach for the Quantification of Different Inorganic and Organic Phosphorus Compounds in Environmental Samples by P L2,3-Edge X-ray Absorption Near-Edge Structure (XANES) Spectroscopy

Cognizing and characterizing the organic phosphorus in lake sediments: Advances and challenges

Organic phosphorus (OP) is one of the main forms of phosphorus in lake ecosystems. Mounting evidence has shown that sediment OP has become a major but underestimated issue in addressing lake eutrophication and algal bloom. However, a holistic view of sediment OP remains missing. This review aims to provide an overview of progress on the studies of OP in lake sediments, focusing on the contribution of OP to internal P loading, its potential role in algal bloom, and the migration and transformation. In addition, this work systematically summarized current methods for characterizing OP content, chemical fraction, composition, bioavailability, and assessment of OP release in sediment, with the pros and cons of each method being discussed. In the end, this work pointed out following efforts needed to deepen the understanding of sediment OP, namely: (1) In-depth literature review from a global perspective regarding the contribution of sediment OP to internal P loading with further summary about its pattern of distribution, accumulation and historical changes; (2) better mathematical models for describing drivers and the linkages between the biological pump of algal bloom and the replenishment of sediment OP; (3) fully accounting the composition and molecular size of OP for better understanding its transformation process and mechanism; ; (4) developing direct, high-sensitivity and combined techniques to improve the precision for identifying OP in sediments; (5) establishing the response of OP molecular properties and chemical reactivity to OP biodegradability and designing a comprehensive and accurate composite index to deepen the understanding for the bioavailability of OP; and (6) integrating fundamental processes of OP in current models to better describe the release and exchange of P in sediment-water interface (SWI). This work is expected to provide critical information about OP properties and deliver perspectives of novel characterization methods.

Novel insights into molecular composition of organic phosphorus in lake sediments

Organic phosphorus (Po) plays a key role in eutrophication and ecological equilibrium in lake systems. However, characterizing the composition of Po in lake sediments has been a bottleneck hindering further understanding of the biogeochemical cycle of Po. Here, multiple methods of 31P NMR spectroscopy and molecular weight (MW) ultrafiltration were combined to detect Po composition characteristics from a novel angle in ten lake sediments of China. The results showed that sediment Po mainly consisted of monoester (mono-P, 14±8.8% of the NaOH-EDTA total P on average), diester (di-P, 1.4±1.4%) and phosphonate (phos-P, 0.1±0.1%), while the abundance of Po was largely underestimated by 31P NMR methods. Some specific species of mono-P were successfully determined, and the contents of these species followed a decreasing order: inositol hexakisphosphate (IHP6) > RNA mononucleotides (RNA-mnP) > β-glycerophosphate (β-gly) > D-glucose 6-phosphate (Glu-6) > α-glycerophosphate (α-gly), which was largely dependent upon their bioreactivity. A significant relationship between MW and Po components was observed despite the great differences among sediment samples. For refractory Po components, IHP6 was mainly rich in the MW < 3 kDa while phos-P was almost only detected in the MW > 3 kDa, which largely attributed to their metal binding affinities and characteristics. The abundance of bioreactive Po species (α-gly, β-gly, Glu-6, di-P) in high MW (HMW, > 3 kDa) were all higher than that of low MW (LMW, < 3 kDa) due to microbial degradation and self-assembly. If the HMW organic molecules were biologically and chemically more reactive than its LMW counterparts, the high percentage of α-gly, β-gly, glu-6 and di-P in the HMW portion would highlights their high reactivity from the perspective of MW. These insights revealed the dynamics of the MW distribution of Po components and provide valuable information to better understand the Po composition and bioreactivity in sediments.

Crop fertilisation potential of phosphorus in hydrochars produced from sewage sludge

Sewage sludges are a rich underused source of phosphorus (P) which contributes to environmental degradation, yet if recaptured, could return significant amounts of P to agricultural systems. Hydrothermal carbonisation (HTC) can efficiently recover P, with the added ability to transform P species into potentially more desirable forms for direct application to crops. P dynamics in hydrochars have primarily examined P speciation and chemical extractability as indicators of P bioavailability, but few studies directly evaluate the agronomic effectiveness of hydrochars as P fertilisers. As such, there is a clear need to assess the suitability of hydrochar as a source of bioavailable P in plant systems and the influence of HTC synthesis conditions. Response Surface Modelling of HTC synthesis conditions (pH, temperature and time), revealed initial pH significantly influence P distribution. Mild conditions of 180 °C for 30 min at pH 8.0 maximised P recovery (99%) along with carbon (62%) and nitrogen (43%) in hydrochars. Systematic characterisation of hydrochar P by chemical extraction and P L_2,3-edge X-ray absorption near edge spectroscopy revealed H₂O, NaHCO₃ and NaOH- P fractions were significantly (p < 0.05) reduced in all hydrochars, while HCl-P fraction increased with HTC temperatures at pH 7. In contrast, P L_2,3-edge XANES spectra were remarkably similar in raw sludges and corresponding hydrochars, regardless of HTC temperature or pH, revealing P was predominantly present as ferric phosphate with some hydroxyapatite. Multiple linear regression modelling suggested a significant relationship between chemical extractability and P bioavailability to wheat present in the raw sludges and hydrochars. This research provides further insight into the potential to use hydrothermal treatment for recovery and agricultural reuse of P, the importance of operational conditions on P transformation and the relationship between P speciation and bioavailability. The value of sewage sludge in a more sustainable global P cycle is also highlighted.

Raman and XANES Spectroscopic Study of the Influence of Coordination Atomic and Molecular Environments in Biomimetic Composite Materials Integrated with Dental Tissue

In this work, for the first time, the influence of the coordination environment as well as Ca and P atomic states on biomimetic composites integrated with dental tissue was investigated. Bioinspired dental composites were synthesised based on nanocrystalline calcium carbonate-substituted hydroxyapatite Ca4ICa6IIPO46−xCO3x+yOH2−y (nano-cHAp) obtained from a biogenic source and a set of polar amino acids that modelled the organic matrix. Biomimetic composites, as well as natural dental tissue samples, were investigated using Raman spectromicroscopy and synchrotron X-ray absorption near edge structure (XANES) spectroscopy. Molecular structure and energy structure studies revealed several important features related to the different calcium atomic environments. It was shown that biomimetic composites created in order to reproduce the physicochemical properties of dental tissue provide good imitation of molecular and electron energetic properties, including the carbonate anion CO₃²⁻ and the atomic Ca/P ratio in nanocrystals. The features of the molecular structure of biomimetic composites are inherited from the nano-cHAp (to a greater extent) and the amino acid cocktail used for their creation, and are caused by the ratio between the mineral and organic components, which is similar to the composition of natural enamel and dentine. In this case, violation of the nano-cHAp stoichiometry, which is the mineral basis of the natural and bioinspired composites, as well as the inclusion of different molecular groups in the nano-cHAp lattice, do not affect the coordination environment of phosphorus atoms. The differences observed in the molecular and electron energetic structures of the natural enamel and dentine and the imitation of their properties by biomimetic materials are caused by rearrangement in the local environment of the calcium atoms in the HAp crystal lattice. The surface of the nano-cHAp crystals in the natural enamel and dentine involved in the formation of bonds with the organic matrix is characterised by the coordination environment of the calcium atom, corresponding to its location in the Ca^I position—that is, bound through common oxygen atoms with PO₄ tetrahedrons. At the same time, on the surface of nano-cHAp crystals in bioinspired dental materials, the calcium atom is characteristically located in the Ca^II position, bound to the hydroxyl OH group. The features detected in the atomic and molecular coordination environment in nano-cHAp play a fundamental role in recreating a biomimetic dental composite of the natural organomineral interaction in mineralised tissue and will help to find an optimal way to integrate the dental biocomposite with natural tissue.

Species, fractions, and characterization of phosphorus in sewage sludge: A critical review from the perspective of recovery

Phosphorus recovery from municipal sewage sludge is a promising way to alleviate the shortage of phosphorus resources. However, the recovery efficiency and cost depend greatly on phosphorus species and fractions in different sewage sludges, i.e., waste activated sludge and chemically enhanced primary sludge. In this review, the phosphorous (sub-)species and fractions in waste activated sludge and chemically enhanced primary sludge are systematically overviewed and compared. The factors affecting phosphorus fractions, including wastewater treatment process, as well as sludge treatment methods and conditions are summarized and discussed; it is found that phosphorus removal method and sludge treatment process are the dominant factors. The characterization methods of phosphorus species and fractions in sewage sludge are reviewed; non-destructive extraction of poly-P and microscopic IP characterization need more attention. Anaerobic fermentation is the preferable solution to achieve advanced phosphorus release both from waste activated sludge and chemically enhanced primary sludge, because it can make phosphorus species and fractions more suitable for recovery. A post low strength acid extraction after anaerobic fermentation is recommended to facilitate phosphorous release and improve the total recovery rate.