Rotten Eggs Revaluated: Ionic Liquids and Deep Eutectic Solvents for Removal and Utilization of Hydrogen Sulfide

Multiple Applications of a Novel Fluorescence Probe with Large Stokes Shift and Sensitivity for Rapid H2S Detection

Herein, a novel fluorescence probe Fla-DNP based on flavonol has been designed and synthesized for rapid, specific detection of H2S. With the addition of H2S, Fla-DNP triggered thiolysis and released Fla displaying the "turn-on" fluorescence response at 566 nm, which is consistent with the reaction site predicted by calculating Electrostatic potential and ADCH charges. As an easily available H2S probe, Fla-DNP has the advantages of high selectivity, anti-interference, low detection limit (0.834 μM), short response time (6 min), and large Stokes shift (124 nm). The sensing mechanism of H2S was determined by HRMS analysis and DFT calculation. Moreover, Fla-DNP processes a wide range of multiple applications, including the detection of H2S in environmental water samples with good recovery rates ranging from 89.6% to 102.0%, as well as tracking the production of H2S during food spoilage. Meanwhile, the probe exhibits superior biocompatibility and can not only be available used for H2S detection in living cells but be further designed as an H2S-activated CO photoreleaser, based on which it can be developed as a targeted anti-cancer drug.

A Chalcone-based Fluorescence Probe for H2S Detecting Utilizing ESIPT Coupled ICT Mechanism

The accurate and effective identification of hydrogen sulfide holds great significance for environmental monitoring. Azide-binding fluorescent probes are powerful tools for hydrogen sulfide detection. We combined the 2'-Hydroxychalcone scaffold with azide moiety to construct probe Chal-N3, the electron-withdrawing azide moiety was utilized to block the ESIPT process of 2'-Hydroxychalcone and quenches the fluorescence. The fluorescent probe was triggered with the addition of hydrogen sulfide, accompanied by great fluorescence intensity enhancement with a large Stokes shift. With excellent fluorescence properties including high sensitivity, specificity selectivity, and wider pH range tolerance, the probe was successfully applied to natural water samples.

Solubility and Thermodynamic Parameters of H2S/CH4 in Ionic Liquids Determined by 1H NMR

Natural gas remains an important global source of energy. Usually, sour gas from the well or refinery stream contains H2S among other contaminants that should be removed to fulfill permissible standards of use. Despite the use of different gas-liquid sour gas upgrading technologies, ionic liquids (ILs) have been recognized as promising materials to remove H2S from sour gas. However, data concerned with thermodynamic solution functions of H2S in ILs have scarcely been reported in the literature. In this work, solution 1H NMR spectroscopy was employed for quantifying H2S soluble in [BMIM][Cl] and for gaining a better understanding of the H2S-IL interaction. Experiments were carried out in a Young-Tap NMR tube containing a saturated solution of H2S/CH4/[BMIM][Cl] and recording spectra from 298 to 333 K. The thermodynamic solution functions, determined from the Van't Hoff equation, showed that solubility of the H2S in the [BMIM][Cl] is an exothermic gas-liquid physisorption process (ΔsolH° = -66.13 kJmol-1) with a negative entropy change (ΔsolS° = -168.19 JK-1 mol-1). 1H NMR spectra of the H2S/[BMIM][Cl] solution show a feature of strong solute-solvent interactions. However, solubility enthalpy is a fifth of the H-S bond energy value. Results from 1H NMR spectroscopy also agree with those from the bench dynamic experiments.

Novel 2-Benzo[d]thiazolyl-4-quinolinylphenol Skeleton-Based Turn-on Fluorescent Probe for H2S Detection and its Multiple Applications in Water Environment, Foodstuffs, and Living Organisms

Hydrogen sulfide (H₂S) has comprehensive contributions to maintaining the normal operation and stability of organisms, and it also occurs in the wastewater environment and is related to the deterioration of foodstuffs. Therefore, developing high-sensitive detection techniques for tracing H₂S is promising and meaningful. Inspired by this, a novel nopinone-based fluorescent probe NPS for the recognition of H₂S was designed and synthesized with excellent sensitivity, low limit of detection (79 nM), good selectivity, and wide pH range (5-9). NPS could emit strong yellow fluorescence and its emission intensity showed a remarkable augmentation at 520 nm upon the supplement of H₂S. Furthermore, the recognition mechanism of NPS for H₂S was verified by the HRMS analysis, ¹H NMR spectra titration, and DFT computation. What is more, NPS also had broad applications in the monitoring of real water samples, red wine, beer, and eggs samples, which showed its development prospect and value in environmental pollution, foodstuffs quality analysis fields. NPS also was applied to monitor trace exogenous H₂S and bioimaging in living cells and zebrafish.

Low-temperature direct electrochemical splitting of H2S

Hydrogen is considered one of the most promising decarbonized fuels. However, its applicability is limited due to the ecological constraints of its production. Hydrogen sulfide (H2S) is widely available in oil and gas reservoirs and has the potential of becoming an energetically favorable source of hydrogen. Nevertheless, its electrochemical separation into H2 and elemental sulfur has not been successfully achieved at the industrial scale, due to sulfur poisoning of the electrodes at the sulfur oxidation half-reaction. This review highlights the progress of the direct electrolytic separation of H2S below the sulfur dew point, where the sulfur poisoning effect becomes more prominent. The article discusses the different technologies and approaches explored to improve the energy efficiency and stability of H2S electrolytic systems, including the recent use of nanostructured electrodes and novel sulfur solvents as electrolytes.

Research and Performance Evaluation on Selective Absorption of H2S from Gas Mixtures by Using Secondary Alkanolamines

Exploring new solvents for efficient acid gas removal is one of the most attractive topics in industrial gas purification. Herein, using 2-tertiarybutylamino-2-ethoxyethanol as an absorbent in a packed column at atmospheric pressure was examined for selective absorption of H2S from mixed gas streams. In the present work, the acid gas load, H2S absorption selectivity, acid gas removal ratio, amine solution regeneration performance, and corrosion performance were investigated through evaluating experiments absorbing H2S and CO2 by using methyldiethanolamine and 2-tertiarybutylamino-2-ethoxyethanol. The experimental results illustrate that the H2S absorption selective factors were 3.88 and 15.81 by using 40% methyldiethanolamine and 40% 2-tertiarybutylamino-2-ethoxyethanol at 40 °C, respectively, showing that 2-tertiarybutylamino-2-ethoxyethanol is an efficient solvent for selective H2S removal, even better than methyldiethanolamine. Based on the consideration of cost, we added 5% TBEE to 35% MDEA to form a blended aqueous solvent. To our satisfaction, the blended amine solvent obtained a 99.79% H2S removal rate and a 22.68% CO2 co-absorption rate, while using the methyldiethanolamine alone achieved a 98.33% H2S removal rate and a 23.52% CO2 co-absorption rate; the blended solvent showed better H2S absorption efficiency and selectivity. Taken together, this work provides valuable information for a promising alkanolamine for acid gas removal, and the preliminary study has found that the aqueous blend of methyldiethanolamine and 2-tertiarybutylamino-2-ethoxyethanol is an efficient solvent for selective H2S removal, which not only extends the application field for sterically hindered amines, but also opens up new opportunities in blended solvent design.