1
|
Prihandana GS, Maulana SS, Soedirdjo RS, Tanujaya V, Pramesti DMA, Sriani T, Jamaludin MF, Yusof F, Mahardika M. Preparation and Characterization of Polyethersulfone/Activated Carbon Composite Membranes for Water Filtration. MEMBRANES 2023; 13:906. [PMID: 38132910 PMCID: PMC10744510 DOI: 10.3390/membranes13120906] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2023] [Revised: 11/22/2023] [Accepted: 12/05/2023] [Indexed: 12/23/2023]
Abstract
Ultrafiltration membrane technology holds promise for wastewater treatment, but its widespread application is hindered by fouling and flux reduction issues. One effective strategy for enhancing ultrafiltration membranes involves incorporating activated carbon powder. In this study, composite polyethersulfone (PES) ultrafiltration membranes were fabricated to include activated carbon powder concentrations between 0 and 1.5 wt.%, with carbon size fixed at 200 mesh. The ultrafiltration membranes were evaluated in terms of membrane morphology, hydrophilicity, pure water flux, equilibrium water content, porosity, average pore size, protein separation, and E-coli bacteria removal. It was found that the addition of activated carbon to PES membranes resulted in improvements in some key properties. By incorporating activated carbon powder, the hydrophilicity of PES membranes was enhanced, lowering the contact angle from 60° to 47.3° for composite membranes (1.0 wt.% of activated carbon) compared to the pristine PES membrane. Water flux tests showed that the 1.0 wt.% composite membrane yielded the highest flux, with an improvement of nearly double the initial value at 2 bar, without compromising bovine serum albumin rejection or bacterial removal capabilities. This study also found that the inclusion of activated carbon had a minor impact on the membrane's porosity and equilibrium water content. Overall, these insights will be beneficial in determining the optimal concentration of activated carbon powder for PES ultrafiltration membranes.
Collapse
Affiliation(s)
- Gunawan Setia Prihandana
- Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Jl. Dr. Ir. H. Soekarno, Surabaya 60115, Indonesia; (S.S.M.); (R.S.S.); (V.T.); (D.M.A.P.)
| | - Sayed Sulthan Maulana
- Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Jl. Dr. Ir. H. Soekarno, Surabaya 60115, Indonesia; (S.S.M.); (R.S.S.); (V.T.); (D.M.A.P.)
| | - Rahmat Santoso Soedirdjo
- Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Jl. Dr. Ir. H. Soekarno, Surabaya 60115, Indonesia; (S.S.M.); (R.S.S.); (V.T.); (D.M.A.P.)
| | - Venni Tanujaya
- Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Jl. Dr. Ir. H. Soekarno, Surabaya 60115, Indonesia; (S.S.M.); (R.S.S.); (V.T.); (D.M.A.P.)
| | - Desak Made Adya Pramesti
- Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Jl. Dr. Ir. H. Soekarno, Surabaya 60115, Indonesia; (S.S.M.); (R.S.S.); (V.T.); (D.M.A.P.)
| | - Tutik Sriani
- Department of Research and Development, PT. Global Meditek Utama—IITOYA, Sardonoharjo, Ngaglik, Sleman, Yogyakarta 55581, Indonesia;
| | - Mohd Fadzil Jamaludin
- Centre of Advanced Manufacturing & Material Processing (AMMP Centre), Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia; (M.F.J.); (F.Y.)
| | - Farazila Yusof
- Centre of Advanced Manufacturing & Material Processing (AMMP Centre), Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia; (M.F.J.); (F.Y.)
- Centre for Foundation Studies in Science, Universiti Malaya, Kuala Lumpur 50603, Malaysia
| | - Muslim Mahardika
- Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada, Jalan Grafika No. 2, Yogyakarta 55281, Indonesia;
| |
Collapse
|
2
|
Geleta TA, Maggay IV, Chang Y, Venault A. Recent Advances on the Fabrication of Antifouling Phase-Inversion Membranes by Physical Blending Modification Method. MEMBRANES 2023; 13:membranes13010058. [PMID: 36676865 PMCID: PMC9864519 DOI: 10.3390/membranes13010058] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Revised: 12/16/2022] [Accepted: 12/19/2022] [Indexed: 05/31/2023]
Abstract
Membrane technology is an essential tool for water treatment and biomedical applications. Despite their extensive use in these fields, polymeric-based membranes still face several challenges, including instability, low mechanical strength, and propensity to fouling. The latter point has attracted the attention of numerous teams worldwide developing antifouling materials for membranes and interfaces. A convenient method to prepare antifouling membranes is via physical blending (or simply blending), which is a one-step method that consists of mixing the main matrix polymer and the antifouling material prior to casting and film formation by a phase inversion process. This review focuses on the recent development (past 10 years) of antifouling membranes via this method and uses different phase-inversion processes including liquid-induced phase separation, vapor induced phase separation, and thermally induced phase separation. Antifouling materials used in these recent studies including polymers, metals, ceramics, and carbon-based and porous nanomaterials are also surveyed. Furthermore, the assessment of antifouling properties and performances are extensively summarized. Finally, we conclude this review with a list of technical and scientific challenges that still need to be overcome to improve the functional properties and widen the range of applications of antifouling membranes prepared by blending modification.
Collapse
|
3
|
Prihandana GS, Sriani T, Mahardika M. Effect of Polyvinylpyrrolidone on Polyvinylidene Fluoride/Hydroxyapatite- Blended Nanofiltration Membranes: Characterization and Filtration Properties. RECENT PATENTS ON NANOTECHNOLOGY 2023; 17:51-58. [PMID: 35236275 DOI: 10.2174/1872210516666220302095010] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/27/2021] [Revised: 10/15/2021] [Accepted: 01/05/2022] [Indexed: 06/14/2023]
Abstract
INTRODUCTION The application of polyvinylidene fluoride (PVDF) as a filtration membrane is limited due to its hydrophobicity. This paper elaborated on the fabrication process of nanofiltration PVDF membrane incorporating various quantities of hydrophilic polyvinylpyrrolidone (PVP) and hydroxyapatite (HA) using a wet phase inversion method to improve its hydrophilicity. METHODS The membrane was fabricated by using the wet phase inversion method. It was then characterized in terms of water permeability, water contact angle, water content, surface energy, and surface porosity. Bacteria and Fe ions filtration was conducted to investigate the membrane filtration performance. RESULTS The PVDF/PVP/HA-blended membrane showed the highest water permeability (6,165 LMH/Bar), water content (45.2 %), and surface energy (104.1 mN/m) when 2 wt.% of PVP was introduced into the base polymer PVDF. This fabricated membrane, labeled as PVP 2.0, also showed the lowest contact angle (64°) and the highest surface porosity (42%). CONCLUSION Overall, the PVP introduction patents into the polymeric membrane doping solution potentially improves membrane hydrophilicity and permeability.
Collapse
Affiliation(s)
- Gunawan Setia Prihandana
- Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Jl. Dr. Ir. H. Soekarno, Surabaya 60115, Indonesia
| | - Tutik Sriani
- Department of Research and Development, PT. Global Meditek Utama, Sardonoharjo, Ngaglik, Sleman, Yogyakarta 55581, Indonesia
| | - Muslim Mahardika
- Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada, Jalan Grafika No. 2, Yogyakarta 55281, Indonesia
| |
Collapse
|
4
|
Purushothaman M, Harikrishnan A, Senthil Kumar P, George J, Rangasamy G, Vaidyanathan VK. Enhancement of antifouling properties, metal ions and protein separation of poly(ether-ether-sulfone) ultrafiltration membranes by incorporation of poly ethylene glycol and n-ZnO. ENVIRONMENTAL RESEARCH 2023; 216:114696. [PMID: 36328226 DOI: 10.1016/j.envres.2022.114696] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/26/2022] [Revised: 10/11/2022] [Accepted: 10/27/2022] [Indexed: 06/16/2023]
Abstract
Composite polymeric membranes with enhanced anti-fouling properties, antimicrobial activities and flux were produced via the phase inversion technique using poly (ether-ether-sulfone) (PEES)/polyethylene glycol (PEG) and n-ZnO. SEM and ATR-FTIR spectroscopy were used to study the morphological and chemical properties of the resulting ultrafiltration membranes. PEG and n-ZnO concentration has an effect on membrane morphologies, ultrafiltration performance, thermal characteristics, metal ion separation studies, surface hydrophilicity and anti-fouling capabilities. The permeate flux increased when the PEG concentration was raised. This results revealed that adding PEG and n-ZnO to membranes increased their surface hydrophilicity and anti-fouling properties. The inclusion of 1.5 wt % n-ZnO and 5 wt % PEG to the pristine PEES membrane resulted in a higher flux of 233.76 L m-2 h-1, 70.09 % of water content, 47.46° of contact angle, the porosity of 30.20 %, and hydraulic resistance of 0.22 kPa/Lm-2h-1. Anti-fouling properties of the fabricated membrane were assessed using a model foulant BSA, which revealed a high flux recovery ratio value. As a result, the PEG and n-ZnO incorporated membrane is more hydrophilic than the virgin membrane. In addition, the prepared PEES/PEG/n-ZnO membrane showed a significant increase in metal ions and protein rejection. Furthermore, an antibacterial test of the membrane revealed that the PEG and n-ZnO composite membrane outperformed the bare PEES membrane in terms of antibacterial capabilities. Overall, the findings reveal that combining n-ZnO and PEG resulted in a membrane with improved anti-fouling capabilities and hydrophilicity, making it suitable for water purification.
Collapse
Affiliation(s)
| | - Adhikesavan Harikrishnan
- Department of Chemistry, School of Arts and Science, AVIT Campus, Vinayaka Mission's Research Foundation, Paiyanoor, Chennai - 603104, Tamil Nadu, India
| | - P Senthil Kumar
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam 603110, Tamil Nadu, India; Centre of Excellence in Water Research (CEWAR), Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam 603110, Tamil Nadu, India; School of Engineering, Lebanese American University, Byblos, Lebanon.
| | - Jenet George
- Integrated Bioprocessing Laboratory, Department of Biotechnology, School of Bioengineering, SRM Institute of Science and Technology, Chennai, - 603 203, India
| | - Gayathri Rangasamy
- University Centre for Research and Development & Department of Civil Engineering, Chandigarh University, Gharuan, Mohali, Punjab - 140413, India
| | - Vinoth Kumar Vaidyanathan
- Integrated Bioprocessing Laboratory, Department of Biotechnology, School of Bioengineering, SRM Institute of Science and Technology, Chennai, - 603 203, India.
| |
Collapse
|
5
|
Antibacterial Activity of Silver Nanoflake (SNF)-Blended Polysulfone Ultrafiltration Membrane. Polymers (Basel) 2022; 14:polym14173600. [PMID: 36080676 PMCID: PMC9459915 DOI: 10.3390/polym14173600] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2022] [Revised: 08/22/2022] [Accepted: 08/27/2022] [Indexed: 02/07/2023] Open
Abstract
The aim of this research was to study the possibility of using silver nanoflakes (SNFs) as an antibacterial agent in polysulfone (PSF) membranes. SNFs at different concentrations (0.1, 0.2, 0.3 and 0.4 wt.%) were added to a PSF membrane dope solution. To investigate the effect of SNFs on membrane performance and properties, the water contact angle, protein separation, average pore size and molecular weight cutoffs were measured, and water flux and antibacterial tests were conducted. The antimicrobial activities of the SNFs were investigated using Escherichia coli taken from river water. The results showed that PSF membranes blended with 0.1 wt.% SNFs have contact angles of 55°, which is less than that of the pristine PSF membrane (81°), exhibiting the highest pure water flux. Molecular weight cutoff values of the blended membranes indicated that the presence of SNFs does not lead to enlargement of the membrane pore size. The rejection of protein (egg albumin) was improved with the addition of 0.1 wt.% SNFs. The SNFs showed antimicrobial activity against Escherichia coli, where the killing rate was dependent on the SNF concentration in the membranes. The identified bacterial colonies that appeared on the membranes decreased with increasing SNF concentration. PSF membranes blended with SNF, to a great degree, possess quality performance across several indicators, showing great potential to be employed as water filtration membranes.
Collapse
|
6
|
Intelligent pH-Sensitive Indicator Based on Chitosan@PVP Containing Extracted Anthocyanin and Reinforced with Sulfur Nanoparticles: Structure, Characteristic and Application in Food Packaging. J Inorg Organomet Polym Mater 2022. [DOI: 10.1007/s10904-022-02445-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/16/2022]
|
7
|
Prihandana GS, Sriani T, Muthi’ah AD, Machmudah A, Mahardika M, Miki N. Study Effect of nAg Particle Size on the Properties and Antibacterial Characteristics of Polysulfone Membranes. NANOMATERIALS 2022; 12:nano12030388. [PMID: 35159732 PMCID: PMC8840566 DOI: 10.3390/nano12030388] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/28/2021] [Revised: 01/21/2022] [Accepted: 01/21/2022] [Indexed: 12/12/2022]
Abstract
Polysulfone ultrafiltration membranes were fabricated using various sizes (20, 40, and 90-210 nm) of silver nanoparticles (nAg) blended in a dope solution. To characterize the performance and properties of the prepared membranes, scanning electron microscopy (SEM), water contact angle, protein separation, water flux, and antibacterial tests were conducted. The characterization results revealed that when nAg particles (20 nm) were blended into the base polymer PSF, the PSF/nAg blended membrane had the lowest contact angle (58.5°) and surface energy (110.7 mN/m). When experimenting with ultrafiltration using protein solutions, bare PSF and PSF/nAg-20 blended membranes gave similar values of protein rejection: 93% of bovine serum albumin (BSA) and 70% of lysozyme rejection. Furthermore, SEM studies showed that the surface pore size was reduced by adding 20 nm nAg particles in the casting solution. Most importantly, the introduction of 40 nm nAg particles reduced the growth of bacterial colonies on the membrane surface by up to 72%. These findings revealed that nAg particles are expected to be a potential modifier for the fabrication of an ultrafiltration membrane.
Collapse
Affiliation(s)
- Gunawan Setia Prihandana
- Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Jl. Dr. Ir. H. Soekarno, Surabaya 60115, Indonesia; (A.D.M.); (A.M.)
- Correspondence: ; Tel.: +62-881-0360-00830
| | - Tutik Sriani
- Department of Research and Development, PT. Global Meditek Utama, Sardonoharjo, Ngaglik, Sleman, Yogyakarta 55581, Indonesia;
| | - Aisyah Dewi Muthi’ah
- Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Jl. Dr. Ir. H. Soekarno, Surabaya 60115, Indonesia; (A.D.M.); (A.M.)
| | - Affiani Machmudah
- Department of Industrial Engineering, Faculty of Advanced Technology and Multidiscipline, Universitas Airlangga, Jl. Dr. Ir. H. Soekarno, Surabaya 60115, Indonesia; (A.D.M.); (A.M.)
| | - Muslim Mahardika
- Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada, Jalan Grafika No. 2, Yogyakarta 55281, Indonesia;
| | - Norihisa Miki
- Department of Mechanical Engineering, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522, Japan;
| |
Collapse
|
8
|
Rameesha L, Rana D, Kaleekkal NJ, Nagendran A. Efficacy of MOF-199 in improvement of permeation, morphological, antifouling and antibacterial characteristics of polyvinylidene fluoride membranes. NEW J CHEM 2022. [DOI: 10.1039/d2nj00005a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Metal–organic frameworks (MOFs) are widely explored for advances in hybrid membranes because of their bonding and fondness in polymers.
Collapse
Affiliation(s)
- Laila Rameesha
- Polymeric Materials Research Lab, PG & Research Department of Chemistry, Alagappa Government Arts College, Karaikudi – 630 003, India
| | - Dipak Rana
- Department of Chemical and Biological Engineering, University of Ottawa, 161 Louis Pasteur St., Ottawa, ON, K1N 6N5, Canada
| | - Noel Jacob Kaleekkal
- Department of Chemical Engineering, National Institute of Technology Calicut (NITC), Kozhikode, India
| | - Alagumalai Nagendran
- Polymeric Materials Research Lab, PG & Research Department of Chemistry, Alagappa Government Arts College, Karaikudi – 630 003, India
| |
Collapse
|
9
|
Kratz K, Heuchel M, Weigel T, Lendlein A. Surface hydrophilization of highly porous poly(ether imide) microparticles by covalent attachment of poly(vinyl pyrrolidone). POLYMER 2020. [DOI: 10.1016/j.polymer.2020.123045] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
|
10
|
Kanagaraj P, Soyekwo F, Mohamed IM, Huang W, Liu C. Towards improved protein anti-fouling and anti-microbial properties of poly (vinylidene fluoride) membranes by blending with lactate salts-based polyurea as surface modifiers. J Colloid Interface Sci 2020; 567:379-392. [DOI: 10.1016/j.jcis.2020.02.026] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2019] [Revised: 02/03/2020] [Accepted: 02/09/2020] [Indexed: 12/17/2022]
|
11
|
Effect of BSA and sodium alginate adsorption on decline of filtrate flux through polyethylene microfiltration membranes. J Memb Sci 2020. [DOI: 10.1016/j.memsci.2019.117469] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
12
|
Santos AMD, Habert AC, Ferraz HC. POLYETHERIMIDE/POLYVINYLPYRROLIDONE HOLLOW-FIBER MEMBRANES FOR USE IN HEMODIALYSIS. BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING 2019. [DOI: 10.1590/0104-6632.20190364s20180529] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/02/2023]
|
13
|
Polydopamine layered poly (ether imide) ultrafiltration membranes tailored with silver nanoparticles designed for better permeability, selectivity and antifouling. J IND ENG CHEM 2019. [DOI: 10.1016/j.jiec.2019.03.014] [Citation(s) in RCA: 38] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
|
14
|
Sri Abirami Saraswathi MS, Rana D, Alwarappan S, Gowrishankar S, Kanimozhi P, Nagendran A. Cellulose acetate ultrafiltration membranes customized with bio-inspired polydopamine coating and in situ immobilization of silver nanoparticles. NEW J CHEM 2019. [DOI: 10.1039/c8nj04511a] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Schematic representation of the surface modification of cellulose acetate membranes with self-polymerized dopamine and in situ immobilization of AgNPs.
Collapse
Affiliation(s)
| | - Dipak Rana
- Department of Chemical and Biological Engineering
- University of Ottawa
- Ottawa
- Canada
| | - Subbiah Alwarappan
- CSIR-Central Electrochemical Research Institute (CSIR-CECRI)
- Karaikudi – 630003
- India
| | | | - Paramasivam Kanimozhi
- Polymeric Materials Research Lab
- PG & Research Department of Chemistry
- Alagappa Government Arts College
- Karaikudi – 630 003
- India
| | - Alagumalai Nagendran
- Polymeric Materials Research Lab
- PG & Research Department of Chemistry
- Alagappa Government Arts College
- Karaikudi – 630 003
- India
| |
Collapse
|
15
|
Fabrication of polyetherimide nanocomposite membrane with amine functionalised halloysite nanotubes for effective removal of cationic dye effluents. J Taiwan Inst Chem Eng 2018. [DOI: 10.1016/j.jtice.2018.07.032] [Citation(s) in RCA: 36] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
16
|
Yam-Cervantes M, León-Campos I, Sánchez J, Santiago-García JL, Estrella-Gómez NE, Aguilar-Vega M. Poly(hydroxyamide) as support for thin-film composite membranes for water treatment. Polym Bull (Berl) 2018. [DOI: 10.1007/s00289-018-2619-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
17
|
Kaleekkal NJ, Radhakrishnan R, Sunil V, Kamalanathan G, Sengupta A, Wickramasinghe R. Performance evaluation of novel nanostructured modified mesoporous silica/polyetherimide composite membranes for the treatment of oil/water emulsion. Sep Purif Technol 2018. [DOI: 10.1016/j.seppur.2018.05.007] [Citation(s) in RCA: 30] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/17/2022]
|
18
|
|
19
|
Saraswathi MSSA, Rana D, Nagendran A, Alwarappan S. Custom-made PEI/exfoliated-MoS 2 nanocomposite ultrafiltration membranes for separation of bovine serum albumin and humic acid. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2018; 83:108-114. [DOI: 10.1016/j.msec.2017.11.015] [Citation(s) in RCA: 25] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/09/2017] [Revised: 10/29/2017] [Accepted: 11/17/2017] [Indexed: 12/11/2022]
|
20
|
|
21
|
Gallardo A, Martínez-Campos E, García C, Cortajarena AL, Rodríguez-Hernández J. Hydrogels with Modulated Ionic Load for Mammalian Cell Harvesting with Reduced Bacterial Adhesion. Biomacromolecules 2017; 18:1521-1531. [PMID: 28387521 DOI: 10.1021/acs.biomac.7b00073] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
In this manuscript, we describe the fabrication of hydrogel supports for mammalian cell handling that can simultaneously prevent materials from microbial contamination and therefore allow storage in aqueous media. For that purpose, hydrogels based on the antifouling polymer polyvinylpyrrolidone (PVP) were functionalized with different ionic groups (anionic, cationic, or two types of zwitterions). In order to prevent bacterial adhesion in the long-term, we took advantage of the synergistic effect of inherently antifouling PVP and additional antifouling moieties incorporated within the hydrogel structure. We evaluated, in a separated series of experiments, both the capability of the materials to act as supports for the growth of mammalian cell monolayers for transplantation (using C-166-GFP endothelial cell line), as well their antifouling properties against Staphylococcus aureus, were studied. All of the hydrogels are structurally pseudodouble networks with high swelling (around 90%) and similar mechanical properties (in the low range for hydrogel materials with Young modulus below 1250 kPa). With some differences, all the charged hydrogels were capable of hosting mouse endothelial cell line C166-GFP to confluence, as well as a monolayer detachment and transplantation through simple mechanical agitation. On the contrary, the uncharged hydrogel was not capable to detach a full monolayer for transplantation. Bacterial adhesion and proliferation was highly sensitive to the functionality (type of charge and density). In particular, we evidenced that monomers bearing zwitterionic sulfobetaine groups, those negatively charged as well as "electro neutral" hydrogels fabricated from stoichiometric amounts of positive and negative units, exhibit excellent antifouling properties both at initial adhesion times and during longer periods up to 72 h.
Collapse
Affiliation(s)
- Alberto Gallardo
- Instituto de Ciencia y Tecnología de Polímeros (ICTP), Consejo Superior de Investigaciones Científicas (CSIC) , C/Juan de la Cierva 3, 28006 Madrid, Spain
| | - Enrique Martínez-Campos
- Instituto de Ciencia y Tecnología de Polímeros (ICTP), Consejo Superior de Investigaciones Científicas (CSIC) , C/Juan de la Cierva 3, 28006 Madrid, Spain.,Tissue Engineering Group; Instituto de Estudios Biofuncionales, Universidad Complutense de Madrid . Paseo Juan XXIII, n° 1, 28040 Madrid, Spain
| | - Carolina García
- Instituto de Ciencia y Tecnología de Polímeros (ICTP), Consejo Superior de Investigaciones Científicas (CSIC) , C/Juan de la Cierva 3, 28006 Madrid, Spain
| | - Aitziber L Cortajarena
- CIC biomaGUNE, Parque Tecnológico de San Sebastián , Paseo Miramón 182, 20014 Donostia-San Sebastián, Spain.,Ikerbasque, Basque Foundation for Science, Ma Díaz de Haro 3, 48013 Bilbao, Spain.,IMDEA-Nanociencia and Centro Nacional de Biotecnología (CNB-CSIC) - IMDEA Nanociencia Associated Unit, Universidad Autónoma de Madrid, Cantoblanco , 28049 Madrid, Spain
| | - Juan Rodríguez-Hernández
- Instituto de Ciencia y Tecnología de Polímeros (ICTP), Consejo Superior de Investigaciones Científicas (CSIC) , C/Juan de la Cierva 3, 28006 Madrid, Spain
| |
Collapse
|
22
|
Cai C, Qiu X, Zeng M, Lin M, Lin X, Lou H, Zhan X, Pang Y, Huang J, Xie L. Using polyvinylpyrrolidone to enhance the enzymatic hydrolysis of lignocelluloses by reducing the cellulase non-productive adsorption on lignin. BIORESOURCE TECHNOLOGY 2017; 227:74-81. [PMID: 28013139 DOI: 10.1016/j.biortech.2016.12.002] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/10/2016] [Revised: 11/30/2016] [Accepted: 12/01/2016] [Indexed: 05/24/2023]
Abstract
Polyvinylpyrrolidone (PVP) is an antifouling polymer to resist the adsorption of protein on solid surface. Effects of PVP on the enzymatic hydrolysis of pretreated lignocelluloses and its mechanism were studied. Adding 1g/L of PVP8000, the enzymatic digestibility of eucalyptus pretreated by dilute acid (Eu-DA) was increased from 28.9% to 73.4%, which is stronger than the classic additives, such as PEG, Tween and bovine serum albumin. Compared with PEG4600, the adsorption of PVP8000 on lignin was larger, and the adsorption layer was more stable and hydrophilic. Therefore, PVP8000 reduced 73.1% of the cellulase non-productive adsorption on lignin and enhanced the enzymatic hydrolysis of lignocelluloses greatly.
Collapse
Affiliation(s)
- Cheng Cai
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China
| | - Xueqing Qiu
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, China.
| | - Meijun Zeng
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China
| | - Meilu Lin
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China
| | - Xuliang Lin
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China
| | - Hongming Lou
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, China.
| | - Xuejuan Zhan
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China
| | - Yuxia Pang
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China
| | - Jinhao Huang
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China
| | - Lingshan Xie
- School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, China
| |
Collapse
|
23
|
Sri Abirami Saraswathi MS, Rana D, Vijayakumar P, Alwarappan S, Nagendran A. Tailored PVDF nanocomposite membranes using exfoliated MoS2 nanosheets for improved permeation and antifouling performance. NEW J CHEM 2017. [DOI: 10.1039/c7nj03193a] [Citation(s) in RCA: 37] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Exfoliated molybdenum disulfide (E-MoS2) nanosheets were synthesized from bulk MoS2.
Collapse
Affiliation(s)
| | - Dipak Rana
- Department of Chemical and Biological Engineering
- University of Ottawa
- Ottawa
- Canada
| | - Prabu Vijayakumar
- CSIR-Central Electrochemical Research Institute (CSIR-CECRI)
- Karaikudi – 630003
- India
| | - Subbiah Alwarappan
- CSIR-Central Electrochemical Research Institute (CSIR-CECRI)
- Karaikudi – 630003
- India
| | - Alagumalai Nagendran
- PG and Research Department of Chemistry
- Polymeric Materials Research Lab
- Alagappa Government Arts College
- Karaikudi – 630 003
- India
| |
Collapse
|
24
|
Yam-Cervantes MA, Santiago-García JL, Loría-Bastarrachea MI, Duarte-Aranda S, Alberto Ruiz-Treviño F, Aguilar-Vega M. Sulfonated polyphenylsulfone asymmetric membranes: Effect of coagulation bath (acetic acid-NaHCO3/isopropanol) on morphology and antifouling properties. J Appl Polym Sci 2016. [DOI: 10.1002/app.44502] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- M. A. Yam-Cervantes
- Unidad de Materiales, Centro de Investigación Científica de Yucatán; A.C., Calle 43 No. 130 x 34 y 36, Colonia Chuburna de Hidalgo 97205 Mérida Yucatán México
| | - J. L. Santiago-García
- Unidad de Materiales, Centro de Investigación Científica de Yucatán; A.C., Calle 43 No. 130 x 34 y 36, Colonia Chuburna de Hidalgo 97205 Mérida Yucatán México
| | - M. I. Loría-Bastarrachea
- Unidad de Materiales, Centro de Investigación Científica de Yucatán; A.C., Calle 43 No. 130 x 34 y 36, Colonia Chuburna de Hidalgo 97205 Mérida Yucatán México
| | - S. Duarte-Aranda
- Unidad de Materiales, Centro de Investigación Científica de Yucatán; A.C., Calle 43 No. 130 x 34 y 36, Colonia Chuburna de Hidalgo 97205 Mérida Yucatán México
| | - F. Alberto Ruiz-Treviño
- Departamento de Ingenierías y de Ingeniería y Ciencias Químicas; Universidad Iberoamericana; Prol. Paseo de la Reforma No. 880 01219 Lomas de Santa Fe México D. F
| | - M. Aguilar-Vega
- Unidad de Materiales, Centro de Investigación Científica de Yucatán; A.C., Calle 43 No. 130 x 34 y 36, Colonia Chuburna de Hidalgo 97205 Mérida Yucatán México
| |
Collapse
|
25
|
Jo YJ, Choi EY, Choi NW, Kim CK. Antibacterial and Hydrophilic Characteristics of Poly(ether sulfone) Composite Membranes Containing Zinc Oxide Nanoparticles Grafted with Hydrophilic Polymers. Ind Eng Chem Res 2016. [DOI: 10.1021/acs.iecr.6b01510] [Citation(s) in RCA: 43] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Y. J. Jo
- School of Chemical Engineering & Materials Science, Chung-Ang University, 221, Huksuk-Dong, Dongjak-Gu, Seoul 156-756, Korea
| | - E. Y. Choi
- School of Chemical Engineering & Materials Science, Chung-Ang University, 221, Huksuk-Dong, Dongjak-Gu, Seoul 156-756, Korea
| | - N. W. Choi
- School of Chemical Engineering & Materials Science, Chung-Ang University, 221, Huksuk-Dong, Dongjak-Gu, Seoul 156-756, Korea
| | - C. K. Kim
- School of Chemical Engineering & Materials Science, Chung-Ang University, 221, Huksuk-Dong, Dongjak-Gu, Seoul 156-756, Korea
| |
Collapse
|
26
|
Xie Y, Moreno N, Calo VM, Cheng H, Hong PY, Sougrat R, Behzad AR, Tayouo R, Nunes SP. Synthesis of highly porous poly(tert-butyl acrylate)-b-polysulfone-b-poly(tert-butyl acrylate) asymmetric membranes. Polym Chem 2016. [DOI: 10.1039/c6py00215c] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
For the first time, self-assembly and non-solvent induced phase separation was applied to polysulfone-based linear block copolymers, reaching mechanical stability much higher than other block copolymer membranes used in this method, which were mainly based on polystyrene blocks.
Collapse
Affiliation(s)
- Yihui Xie
- King Abdullah University of Science Technology (KAUST)
- Biological and Environmental Science and Engineering Division (BESE)
- 23955-6900 Thuwal
- Saudi Arabia
| | - Nicolas Moreno
- King Abdullah University of Science Technology (KAUST)
- Biological and Environmental Science and Engineering Division (BESE)
- 23955-6900 Thuwal
- Saudi Arabia
| | - Victor M. Calo
- King Abdullah University of Science and Technology (KAUST)
- Numerical Porous Media Center (NumPor)
- 23955-6900 Thuwal
- Saudi Arabia
- Curtin University, Applied Geology Department
| | - Hong Cheng
- King Abdullah University of Science Technology (KAUST)
- Water Desalination and Reuse Center
- Biological and Environmental Science and Engineering Division (BESE)
- 23955-6900 Thuwal
- Saudi Arabia
| | - Pei-Ying Hong
- King Abdullah University of Science Technology (KAUST)
- Water Desalination and Reuse Center
- Biological and Environmental Science and Engineering Division (BESE)
- 23955-6900 Thuwal
- Saudi Arabia
| | - Rachid Sougrat
- King Abdullah University of Science Technology (KAUST)
- Imaging and Characterization Core Lab
- 23955-6900 Thuwal
- Saudi Arabia
| | - Ali R. Behzad
- King Abdullah University of Science Technology (KAUST)
- Imaging and Characterization Core Lab
- 23955-6900 Thuwal
- Saudi Arabia
| | - Russell Tayouo
- King Abdullah University of Science Technology (KAUST)
- Biological and Environmental Science and Engineering Division (BESE)
- 23955-6900 Thuwal
- Saudi Arabia
| | - Suzana P. Nunes
- King Abdullah University of Science Technology (KAUST)
- Biological and Environmental Science and Engineering Division (BESE)
- 23955-6900 Thuwal
- Saudi Arabia
| |
Collapse
|
27
|
Shi M, Zhu J, He C. Durable antifouling polyvinylidene fluoride membrane via surface zwitterionicalization mediated by an amphiphilic copolymer. RSC Adv 2016. [DOI: 10.1039/c6ra20079f] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
The antifouling properties of PVDF membrane were remarkably enhanced by facile incorporation of an amphiphilic triblock copolymer PDMAEMA-b-PDMS-b-PDMAEMA and subsequent surface zwitterionicalization.
Collapse
Affiliation(s)
- Mengyuan Shi
- The State Key Laboratory for Modification of Chemical Fibers and Polymer Materials
- College of Materials Science and Engineering
- Donghua University
- Shanghai
- P. R. China
| | - Jing Zhu
- The State Key Laboratory for Modification of Chemical Fibers and Polymer Materials
- College of Materials Science and Engineering
- Donghua University
- Shanghai
- P. R. China
| | - Chunju He
- The State Key Laboratory for Modification of Chemical Fibers and Polymer Materials
- College of Materials Science and Engineering
- Donghua University
- Shanghai
- P. R. China
| |
Collapse
|
28
|
Kanagaraj P, Neelakandan S, Nagendran A, Rana D, Matsuura T, Shalini M. Removal of BSA and HA Contaminants from Aqueous Solution Using Amphiphilic Triblock Copolymer Modified Poly(ether imide) UF Membrane and Their Fouling Behaviors. Ind Eng Chem Res 2015. [DOI: 10.1021/acs.iecr.5b03290] [Citation(s) in RCA: 29] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- P. Kanagaraj
- PG & Research Department of Chemistry, Polymeric Materials Research Lab, Alagappa Government Arts College, Karaikudi-630 003, India
| | - S. Neelakandan
- PG & Research Department of Chemistry, Polymeric Materials Research Lab, Alagappa Government Arts College, Karaikudi-630 003, India
| | - A. Nagendran
- PG & Research Department of Chemistry, Polymeric Materials Research Lab, Alagappa Government Arts College, Karaikudi-630 003, India
| | - D. Rana
- Department
of Chemical and Biological Engineering, Industrial Membrane Research Institute, University of Ottawa, 161 Louis Pasteur Street, Ottawa, ON K1N
6N5, Canada
| | - T. Matsuura
- Department
of Chemical and Biological Engineering, Industrial Membrane Research Institute, University of Ottawa, 161 Louis Pasteur Street, Ottawa, ON K1N
6N5, Canada
| | - M. Shalini
- PG & Research Department of Chemistry, Polymeric Materials Research Lab, Alagappa Government Arts College, Karaikudi-630 003, India
| |
Collapse
|
29
|
Yuan S, Wang J, Wang X, Long S, Zhang G, Yang J. Poly(arylene sulfide sulfone) hybrid ultrafiltration membrane with TiO2-g-PAA nanoparticles: Preparation and antifouling performance. POLYM ENG SCI 2015. [DOI: 10.1002/pen.24174] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Shushan Yuan
- College of Polymer Materials Science and Engineering of Sichuan University; Chengdu 610065 China
| | - Juan Wang
- College of Polymer Materials Science and Engineering of Sichuan University; Chengdu 610065 China
| | - Xiaojun Wang
- Institute of Materials Science & Technology, Analytical & Testing Center, Sichuan University; Chengdu 610064 China
| | - Shengru Long
- Institute of Materials Science & Technology, Analytical & Testing Center, Sichuan University; Chengdu 610064 China
| | | | - Jie Yang
- Institute of Materials Science & Technology, Analytical & Testing Center, Sichuan University; Chengdu 610064 China
- State Key Laboratory of Polymer Materials Engineering, Sichuan University; Chengdu 610065 China
| |
Collapse
|
30
|
Kanagaraj P, Nagendran A, Rana D, Matsuura T, Neelakandan S, Revathi R, Pandiyarajan N. Performances of poly(vinylidene fluoride-co
-hexafluoropropylene) ultrafiltration membranes modified with poly(vinyl pyrrolidone). POLYM ENG SCI 2015. [DOI: 10.1002/pen.24138] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Palsamy Kanagaraj
- PG & Research Department of Chemistry; Polymeric Materials Research Lab, Alagappa Government Arts College; Karaikudi 630 003 Tamil Nadu India
| | - Alagumalai Nagendran
- PG & Research Department of Chemistry; Polymeric Materials Research Lab, Alagappa Government Arts College; Karaikudi 630 003 Tamil Nadu India
| | - Dipak Rana
- Department of Chemical and Biological Engineering; Industrial Membrane Research Institute; University of Ottawa; Ottawa Ontario Canada K1N 6N5
| | - Takeshi Matsuura
- Department of Chemical and Biological Engineering; Industrial Membrane Research Institute; University of Ottawa; Ottawa Ontario Canada K1N 6N5
| | - Sivasubramaniyan Neelakandan
- PG & Research Department of Chemistry; Polymeric Materials Research Lab, Alagappa Government Arts College; Karaikudi 630 003 Tamil Nadu India
| | - Rajendran Revathi
- PG & Research Department of Chemistry; Polymeric Materials Research Lab, Alagappa Government Arts College; Karaikudi 630 003 Tamil Nadu India
| | - Nambirajan Pandiyarajan
- PG & Research Department of Chemistry; Polymeric Materials Research Lab, Alagappa Government Arts College; Karaikudi 630 003 Tamil Nadu India
| |
Collapse
|