Process Pathways Optimization for a Lignocellulosic Biorefinery Producing Levulinic Acid, Succinic Acid, and Ethanol

Lignin: Dissolution, modification, and derived materials

Global environmental issues and energy dilemmas have made renewable and sustainable technologies become on the cutting edge. Lignin, the most abundant non-petroleum polyhydroxy aromatic macromolecule, has been widely studied to convert to platform chemicals via violent cleavage. This makes good use of lignin, which can effectively remit environmental and energy problems. However, the self-contained three-dimensional structure was wasted in this process, and thus, the synthesis of lignin-based materials has become another important research direction. Meanwhile, the value-added utilization of technical lignin is still a problem at present. There are some limitations in taking advantage of lignin due to the different sources and isolation routes, resulting in poor solubility and compatibility in application. Technical lignins contain aliphatic hydroxyl, phenolic hydroxyl, methoxyl, and other oxygen-containing functional groups, which can be further chemically modified to adjust the technical lignins of physicochemical properties for forming available materials rather than just being used as fuel. Here, we summarized the development of technical lignins, including the following aspects: (1) the chemical structures of lignins, the critical factors that influenced the dissolution of lignin, which induced different dispersion states of lignin in the as-prepared materials; (2) the dissolution behavior and mechanism for lignins; (3) the potential chemical modification routes for lignin; and (4) preparation and properties of lignin-based hybrid and composite materials. This comprehensive review can provide valuable information on lignin dissolution, chemical modification, and further employment in the fabrication of materials.

Coupling process for preparing biomass-based furfural and levulinic acid from corncob: Extraction, green chemistry and techno-economic assessment

The purpose of this study is to design and investigate two coupling processes for acid-catalyzed hydrolysis of corncob, achieving the simultaneous preparation of biomass-based furfural and levulinic acid (LA). Meanwhile, high concentration and yield of LA were obtained through a situ feeding strategy of pretreated furfural residue with high solids loading (20%, w/v). In Scenario A, 2-methyltetrahydrofuran was selected as the solvent for the LA extraction process compared with the neutralization process in Scenario B. Techno-economic assessment results show that Scenario A is technically feasible and cost-competitive, with an internal rate of return of 21.92%, a net present value of 121 million US dollars, a carbon efficiency of 72%, an environmental factor of 4.38, and a process mass intensity of 32.19. This study will provide new insights for fully utilizing lignocellulosic biomass to prepare renewable energy resources, comprehensively evaluating the economic feasibility, and promoting green and low-carbon development.

Advances and opportunities in integrating economic and environmental performance of renewable products

There is a growing global need to transition from a fossil-based to a bio-based economy to produce fuels, chemicals, food, and materials. In the specific context of industrial biotechnology, a successful transition toward a sustainable development requires not only steering investment toward a bioeconomy, but also responsibly introducing bio-based products with lower footprints and competitive market prices. A comprehensive sustainability assessment framework applied along various research stages to guide bio-based product development is urgently needed but currently missing. To support holistic approaches to strengthen the global bioeconomy, the present study discusses methodologies and provides perspectives on the successful integration of economic and environmental performance aspects to guide product innovation in biotechnology. Efforts on quantifying the economic and environmental performance of bio-based products are analyzed to highlight recent trends, challenges, and opportunities. We critically analyze methods to integrate Techno-Economic Assessment (TEA) and Life Cycle Assessment (LCA) as example tools that can be used to broaden the scope of assessing biotechnology systems performance. We highlight the lack of social assessment aspects in existing frameworks. Data need for jointly applying TEA and LCA of succinic acid as example commodity chemical are assessed at various Technology readiness levels (TRLs) to illustrate the relevance of the level of integration and show the benefits of the use of combined assessments. The analysis confirms that the implementation of integrated TEA and LCA at lower TRLs will provide more freedom to improve bio-based product's sustainability performance. Consequently, optimizing the system across TRLs will guide sustainability-driven innovation in new biotechnologies transforming renewable feedstock into valuable bio-based products.

Techno-economic optimization of a process superstructure for lignin valorization

Lignin, the most abundant aromatic biopolymer on Earth, is often considered a biorefinery by-product, despite its potential to be valorized into high-added-value chemicals and fuels. In this work, an integrated superstructure-based optimization model was set up and optimized using mixed-integer non-linear programming for the conversion of technical lignin to three main biobased products: aromatic monomers, phenol-formaldehyde resins, and aromatic aldehydes/acids. Several alternative conversion pathways were simultaneously compared to assess the profitability of lignins-based processes by predicting the performance of technologies with different TRL. Upon employing key technologies such as hydrothermal liquefaction, dissolution in solvent, or high-temperature electrolysis, the technical lignins could have a market value of 200 €/t when the market price for aromatic monomers, resins, and vanillin is at least 2.0, 0.8, and 15.0 €/kg, respectively. When lower product selling prices were considered, the aromatic monomers and the resins were not profitable as target products.

Optimal Conversion of Organic Wastes to Value-Added Products: Toward a Sustainable Integrated Biorefinery in Denmark

It is crucial to leave behind the traditional linear economy approach. Shifting the paradigm and adopting a circular (bio)economy seems to be the strategy to decouple economic growth from continuous resource extraction. To this end, producing bio-based products that aim to replace a part, if not all, of the fossil-based chemicals and fuels is a promising step. This can be achieved by using multi-product integrated biorefineries that convert organic wastes into chemicals, fuels, and bioenergy to optimize the use and close the materials and energy loops. To further address the development and implementation of organic waste integrated biorefineries, we proposed the open-source organic waste to value-added products (O2V) model and multi-objective optimization tool. O2V aims to provide a quick and straightforward holistic assessment, leading to identifying optimal or near-optimal design, planning, and operational decisions. This model not only prioritizes economic benefits but also takes on board the other pillars of sustainability. The proposed tool is built on a comprehensive superstructure of processing alternatives that include all stages concerning the conversion of organic waste to value-added products. Furthermore, it has been framed and formulated in a “plug-and-play” format, where, when required, the user only needs to add new process data to the structured information database. This database integrates data on (i) new processes (e.g., different conversion technologies), (ii) feedstocks (e.g., composition), and (iii) products (e.g., prices), among others. Due to Denmark’s high availability of organic waste, implementing a second-generation integrated biorefinery in Denmark has been chosen as a realistic showcase. The application of O2V efficiently led to the identification of trade-offs between the different sustainability angles. Thus, it made it possible to determine early-stage decisions regarding product portfolio, optimal production process, and related planning and operational decisions. Henceforth, it has been demonstrated that applying O2V aids in shifting the fossil to bio-based production, thereby contributing to the switch toward a circular bioeconomy.

Chemical data intelligence for sustainable chemistry

This study highlights new opportunities for optimal reaction route selection from large chemical databases brought about by the rapid digitalisation of chemical data. The chemical industry requires a transformation towards more sustainable practices, eliminating its dependencies on fossil fuels and limiting its impact on the environment. However, identifying more sustainable process alternatives is, at present, a cumbersome, manual, iterative process, based on chemical intuition and modelling. We give a perspective on methods for automated discovery and assessment of competitive sustainable reaction routes based on renewable or waste feedstocks. Three key areas of transition are outlined and reviewed based on their state-of-the-art as well as bottlenecks: (i) data, (ii) evaluation metrics, and (iii) decision-making. We elucidate their synergies and interfaces since only together these areas can bring about the most benefit. The field of chemical data intelligence offers the opportunity to identify the inherently more sustainable reaction pathways and to identify opportunities for a circular chemical economy. Our review shows that at present the field of data brings about most bottlenecks, such as data completion and data linkage, but also offers the principal opportunity for advancement.

Technical Evaluation of a Levulinic Acid Plant Based on Biomass Transformation under Techno-Economic and Exergy Analyses

Levulinic acid (LA) recently has attracted much attention as a promising biorefinery platform due to its potential to be economical and sustainable. This paper addresses technical, techno-economic, and exergetic analyses of an industrial LA production via acid-catalyzed dehydration. The process was simulated through Aspen Plus, considering a processing capacity of 15,175.60 kg/h of banana empty fruit bunches. The global productivity yield was 25.56%, producing 3883.13 kg/h of LA. The techno-economic analysis evidenced that this process may be an attractive alternative for biomass valorization, considering the obtained financial results. This process's total production cost was 0.178 $USD per kilogram of biomass and a total annualized cost of $USD 29,163,638.95. Exergy analysis revealed that this process had an irreversibility rate of 1.48 × 10⁵ MJ/h. The pretreatment stage presented the lowest exergetic efficiency. Globally, the exergy efficiency was 53.76%, which is within the reported results for analogous biomass transformation processes.

Recent Developments in Heterogeneous Catalytic Routes for the Sustainable Production of Succinic Acid from Biomass Resources

Succinic acid is a "hot molecule" identified by United States Department of Energy as a substitute for petrochemicals with great scope for its production from biomass. It is used as an intermediate for the production of a huge variety of everyday consumer products with an addressable market share of billions of dollars. Succinic acid and its derivatives are mainly used as pharmaceuticals, adhesives, solvents, intermediates for polymer synthesis, and food additives. Succinic acid is commercially produced from petrochemicals and there is a deficiency of economically viable catalytic processes for its large-scale production from biomass. Recently, a lot of biochemical routes have been devised to enhance its production from biomass resources, but such processes are time-consuming and involve tedious separation procedures. Therefore, this Review focuses on metal-based and metal-free heterogeneous catalytic routes for the synthesis of succinic acid from biomass derived products. The presence of uniform channels, cavities, active sites of various strengths, and the unique surface structure of the heterogeneous catalysts are a few of the interesting features that promote their use in industrial processes.

Techno-Economic Assessment of Bio-Syngas Production for Methanol Synthesis: A Focus on the Water-Gas Shift and Carbon Capture Sections

The biomass-to-methanol process may play an important role in introducing renewables in the industry chain for chemical and fuel production. Gasification is a thermochemical process to produce syngas from biomass, but additional steps are requested to obtain a syngas composition suitable for methanol synthesis. The aim of this work is to perform a computer-aided process simulation to produce methanol starting from a syngas produced by oxygen-steam biomass gasification, whose details are reported in the literature. Syngas from biomass gasification was compressed to 80 bar, which may be considered an optimal pressure for methanol synthesis. The simulation was mainly focused on the water-gas shift/carbon capture sections requested to obtain a syngas with a (H₂ - CO₂)/(CO + CO₂) molar ratio of about 2, which is optimal for methanol synthesis. Both capital and operating costs were calculated as a function of the CO conversion in the water-gas shift (WGS) step and CO₂ absorption level in the carbon capture (CC) unit (by Selexol^® process). The obtained results show the optimal CO conversion is 40% with CO₂ capture from the syngas equal to 95%. The effect of the WGS conversion level on methanol production cost was also assessed. For the optimal case, a methanol production cost equal to 0.540 €/kg was calculated.

Insight into the Sustainable Integration of Bio- and Petroleum Refineries for the Production of Fuels and Chemicals

A petroleum refinery heavily depends on crude oil as its main feedstock to produce liquid fuels and chemicals. In the long term, this unyielding dependency is threatened by the depletion of the crude oil reserve. However, in the short term, its price highly fluctuates due to various factors, such as regional and global security instability causing additional complexity on refinery production planning. The petroleum refining industries are also drawing criticism and pressure due to their direct and indirect impacts on the environment. The exhaust gas emission of automobiles apart from the industrial and power plant emission has been viewed as the cause of global warming. In this sense, there is a need for a feasible, sustainable, and environmentally friendly generation process of fuels and chemicals. The attention turns to the utilization of biomass as a potential feedstock to produce substitutes for petroleum-derived fuels and building blocks for biochemicals. Biomass is abundant and currently is still low in utilization. The biorefinery, a facility to convert biomass into biofuels and biochemicals, is still lacking in competitiveness to a petroleum refinery. An attractive solution that addresses both is by the integration of bio- and petroleum refineries. In this context, the right decision making in the process selection and technologies can lower the investment and operational costs and assure optimum yield. Process optimization based on mathematical programming has been extensively used to conduct techno-economic and sustainability analysis for bio-, petroleum, and the integration of both refineries. This paper provides insights into the context of crude oil and biomass as potential refinery feedstocks. The current optimization status of either bio- or petroleum refineries and their integration is reviewed with the focus on the methods to solve the multi-objective optimization problems. Internal and external uncertain parameters are important aspects in process optimization. The nature of these uncertain parameters and their representation methods in process optimization are also discussed.

A review on commercial-scale high-value products that can be produced alongside cellulosic ethanol

The demand for fossil derivate fuels and chemicals has increased, augmenting concerns on climate change, global economic stability, and sustainability on fossil resources. Therefore, the production of fuels and chemicals from alternative and renewable resources has attracted considerable and growing attention. Ethanol is a promising biofuel that can reduce the consumption of gasoline in the transportation sector and related greenhouse gas (GHG) emissions. Lignocellulosic biomass is a promising feedstock to produce bioethanol (cellulosic ethanol) because of its abundance and low cost. Since the conversion of lignocellulose to ethanol is complex and expensive, the cellulosic ethanol price cannot compete with those of the fossil derivate fuels. A promising strategy to lower the production cost of cellulosic ethanol is developing a biorefinery which produces ethanol and other high-value chemicals from lignocellulose. The selection of such chemicals is difficult because there are hundreds of products that can be produced from lignocellulose. Multiple reviews and reports have described a small group of lignocellulose derivate compounds that have the potential to be commercialized. Some of these products are in the bench scale and require extensive research and time before they can be industrially produced. This review examines chemicals and materials with a Technology Readiness Level (TRL) of at least 8, which have reached a commercial scale and could be shortly or immediately integrated into a cellulosic ethanol process.