Adsorption and Synergetic Fenton-like Degradation of Methylene Blue by a Novel Mesoporous α-Fe2O3/SiO2 at Neutral pH

Photocatalytic activation of peroxydisulfate by UV-LED through rGO/g-C3N4/SiO2 nanocomposite for ciprofloxacin removal: Mineralization, toxicity, degradation pathways, and application for real matrix

If trace amounts of antibiotics remain in the environment, they can lead to microbial pathogens becoming resistant to antibiotics and putting ecosystem health at risk. For instance, ciprofloxacin (CIP) can be found in surface and ground waters, suggesting that conventional water treatment technologies are ineffective at removing it. Now, a rGO/g-C3N4/SiO2 nanocomposite was synthesized in this study to activate peroxydisulfate (PDS) under UVA-LED irradiation. UVA-LED/rGO-g-C3N4-SiO2/PDS system performance was evaluated using Ciprofloxacin as an antibiotic. Particularly, rGO/g-C3N4/SiO2 showed superior catalytic activity for PDS activation to remove CIP. Operational variables, reactive species determination, and mechanisms were investigated. 0.85 mM PDS and 0.3 g/L rGO/g-C3N4/SiO2 eliminated 99.63% of CIP in 35 min and mineralized 59.78% in 100 min at pH = 6.18. By scavenging free radicals, bicarbonate ions inhibit CIP degradation. According to the trapping experiments, superoxide (O2•-) was the main active species rather than sulfate (SO4•-) and hydroxyl radicals (•OH). RGO/g-C3N4/SiO2 showed an excellent recyclable capability of up to six cycles. The UVA-LED/rGO-g-C3N4-SiO2/PDS system was also tested under real conditions. The system efficiency was reasonable. By calculating the synergistic factor (SF), this work highlights the benefit of combining composite, UVA-LED, and PDS. UVA-LED/rGO-g-C3N4-SiO2/PDS had also been predicted to be an eco-friendly process based on the results of the ECOSAR program. Consequently, this study provides a novel and durable nanocomposite with supreme thermal stability that effectively mitigates environmental contamination by eliminating antibiotics from wastewater.

Constructing α-Fe2O3/g-C3N4/SiO2 S-scheme-based heterostructure for photo-Fenton like degradation of rhodamine B dye in aqueous solution

This work successfully fabricated graphitic carbon nitride and magnetically recoverable α-Fe2O3/g-C3N4/SiO2 photo-Fenton catalysts using thermal polycondensation and in situ-simple precursor drying-calcination process, respectively, was examined for model synthetic rhodamine B (RhB) dye in the presence of H2O2 and acidic pH under simulated visible light irradiation. An aqueous suspension of the reaction mixture of dye-containing wastewater was fully degraded and reached 97% of photo-Fenton degradation efficiency within 120 min followed by the production of hydroxyl radical (•OH). The dominant hydroxyl radical position generated surface charge, electrostatic potential distribution, and average local ionization potential, which contributed to the complete mineralization of RhB dye, according to the density functional theory (DFT) calculations. HPLC and GCMS experiments were performed to examine the degradation fragments of RhB and draw a plausible mechanistic pathway which showed that RhB degradation generated a series of N-deethylated products, followed by a one-time ring-opening, which indicated that photosensitization induced a photocatalysis reaction mechanism.

Synthesis of Cu Nanoparticles Incorporated Mesoporous C/SiO2 for Efficient Tetracycline Degradation

In this study, a Cu NPs-incorporated carbon-containing mesoporous SiO2 (Cu/C-SiO2) was successfully synthesized through a grinding-assisted self-infiltration method followed by an in situ reduction process. The obtained Cu/C-SiO2 was then employed as a Fenton-like catalyst to remove tetracycline (TC) from aqueous solutions. TEM, EDS, XRD, N2 adsorption-desorption, FTIR, and XPS methods were used to characterize the crystal structure, morphology, porosity, chemical composition, and surface chemical properties of the catalyst. The effects of initial TC concentration, catalyst dosage, H2O2 dosage, solution pH, HA addition, and water media on the TC degradation over Cu/C-SiO2 were investigated. Scavenging and electrochemical experiments were then carried out to analyze the TC degradation mechanism. The results show that the Cu/C-SiO2 can remove 99.9% of the concentrated TC solution (C0 = 500 mg·L-1), and it can be used in a wide pH range (R.E. = 94-99%, pH = 3.0-11.0). Moreover, hydroxyl radicals (•OH) were detected to be the dominant reactive species in this catalytic system. This study provides a simple and promising method for the synthesis of heteroatom-containing mesoporous catalysts for the decomposition of antibiotics in wastewater.

Synthesis of calcium carbonate-loaded mesoporous SBA-15 nanocomposites for removal of phosphate from solution

Removal of phosphate from water is very crucial for protecting the ecological environment since massive phosphorus fertilizers have been widely used and caused serious water deterioration. Thus, we fabricated a series of calcium carbonate-loaded mesoporous SBA-15 nanocomposites with different Ca:Si molar ratio (CaAS-x) as phosphorus adsorbents via a simple wet-impregnation method. The multiply approaches including X-ray diffraction (XRD), N2 physisorption, thermogravimetric mass spectrometry (TG-MS), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FT-IR) were used to characterize the structure, morphology, and composition of mesoporous CaAS-x nanocomposites. The phosphate adsorption efficiency of the CaAS-x nanocomposites was studied through adsorption and desorption batch tests. Results showed that the increases of Ca:Si molar ratio (rCa:Si) improved the phosphate removal capacity of CaAS nanocomposites, especially CaAS with the optimum synthesis molar ratio of Ca:Si as 0.55 showed the high adsorption capacity of 92.0 mg·g-1 to high concentration of phosphate (> 200 mg·L-1). Note that the CaAS-0.55 had a fast exponentially increased adsorption capacity with increasing the phosphate concentration and correspondingly showed a much faster phosphate removal rate than pristine CaCO3. Apparently, mesoporous structure of SBA-15 contributed to high disperse of CaCO3 nanoparticles leading to the monolayer chemical adsorption complexation formation of phosphate calcium (i.e., =SPO4Ca, =CaHPO4-, and =CaPO4Ca0). Therefore, mesoporous CaAS-0.55 nanocomposite is an environmental-friendly adsorbent for effective removal of high concentration of phosphate in neutral contaminated wastewater.

Simple Preparation of the CuO•Fe3O4/Silica Composite from Rice Husk for Enhancing Fenton-Like Catalytic Degradation of Tartrazine in a Wide pH Range

SiO2 was prepared from rice husk (RH) with the assistance of cetrimonium bromide (CTAB), and the CuO•Fe3O4/SiO2 composite was prepared by a simple coprecipitation method to enhance the Fenton-like degradation of dyes in a wide pH range. SiO2 was a mesoporous material with a relatively large surface area of 496.4 m2/g and a highly relative pore volume of 1.154 cm3/g. The Fe3O4 and CuO particles with the size of 20–50 nm were well dispersed in the composite, making the composite tighter and causing the disappearance of large pores in the range of 20–55 nm. The surface area and pore volume of the composite were reduced to 248.6 m2/g and 0.420 cm3/g, respectively. Fe3O4/SiO2 and Fe3O4 samples only exhibited high catalytic activity in an acidic medium, while the CuO•Fe3O4/SiO2 composite could effectively work in a wide pH range of 3–7. Besides, the effects of reaction conditions such as catalyst dosage, H2O2 concentration, and initial dye concentration on the catalytic performance of the composite were studied. The optimal conditions for the degradation of dye were tartrazine (TA) concentration of 50 mg/L, dosage catalyst of 0.5 g/L, H2O2 concentration of 120 mM, and pH 5. The CuO•Fe3O4/SiO2 composite reached the highest activity at pH 5, showing a degradation efficiency (DE) of 93.3% and a reaction rate of 0.061 min−1. The reusability of the catalyst was investigated by cyclic experiments. The DE of the 3rd reuse remained at 55.1%, equivalent to 93.5% of the first use. The catalytic mechanism for the Fenton system has also been proposed.

A novel CoNi7O8/MnO2 nanocomposite supported on Ni foam as a peroxymonosulfate activator for the highly efficient singlet oxygen mediated removal of methylene blue

Novel CoNi7O8/MnO2 supported on Ni foam presented excellent catalytic activity toward PMS activation, with 100% MB removal achieved within 15 min.

Degradation of Acid Red 1 Catalyzed by Peroxidase Activity of Iron Oxide Nanoparticles and Detected by SERS

Magnetic iron oxide nanoparticles (MIONPs) were synthesized using tannic acid and characterized by Raman, FTIR, UV, and DRX spectroscopy. In a heterogeneous Fenton-like reaction, the catalytic peroxidase-like activity of MIONPs in the degradation of Acid Red 1 (AR 1) dye was investigated. TEM/STEM was used to determine the quasi-spherical morphology and particle size (3.2 nm) of the synthesized MIONPs. The XRD powder patterns were indexed according to the reverse spinel structure of magnetite, and SEM-EDS analysis confirmed their chemical composition. At pH = 3.5, the decomposition of H₂O₂ in hydroxyl radicals by MIONPs results in high AR 1 degradation (99%). This behavior was attributed to the size and surface properties of the MIONPs. Finally, the Surface Enhanced Raman Spectroscopy (SERS) technique detected intermediary compounds in the degradation process.

Fe-based Fenton-like catalysts for water treatment: Preparation, characterization and modification

Fenton reaction based on hydroxyl radicals () is effective for environment remediation. Nevertheless, the conventional Fenton reaction has several disadvantages, such as working at acidic pH, producing iron-containing sludge, and the difficulty in catalysts reuse. Fenton-like reaction using solid catalysts rather than Fe²⁺ has received increasing attention. To date, Fe-based catalysts have received increasing attention due to their earth abundance, good biocompatibility, comparatively low toxicity and ready availability, it is necessary to review the current status of Fenton-like catalysts. In this review, the recent advances in Fe-based Fenton-like catalysts were systematically analyzed and summarized. Firstly, the various preparation methods were introduced, including template-free methods (precipitation, sol gel, impregnation, hydrothermal, thermal, and others) and template-based methods (hard-templating method and soft-templating method); then, the characterization techniques for Fe-based catalysts were summarized, such as X-ray diffraction (XRD), Brunauer, Emmett and Teller (BET), SEM (scanning electron microscopy)/TEM (transmission electron microscopy)/HRTEM (high-resolution TEM), FTIR (Fourier transform infrared spectroscopy)/Raman, XPS (X-ray photoelectron spectroscopy), ⁵⁷Fe Mössbauer spectroscopy etc.; thirdly, some important conventional Fe-based catalysts were introduced, including iron oxides and oxyhydroxides, zero-valent iron (ZVI) and iron disulfide and oxychloride; fourthly, the modification strategies of Fe-based catalysts were discussed, such as microstructure controlling, introduction of support materials, construction of core-shell structure and incorporation of new metal-containing component; Finally, concluding remarks were given and the future perspectives for further study were discussed. This review will provide important information to further advance the development and application of Fe-based catalysts for water treatment.

Iron-nickel bimetallic metal-organic frameworks as bifunctional Fenton-like catalysts for enhanced adsorption and degradation of organic contaminants under visible light: Kinetics and mechanistic studies

Iron-nickel bimetallic organic frameworks (FeNi_X-BDC, H₂BDC: terephthalic acid) were developed as bifunctional materials for adsorption and photo-Fenton degradation of organic dyes with different charge properties. Significantly enhanced adsorption capacity of FeNi_1/15-BDC towards methylene blue (MB) and methyl orange (MO) was achieved, 5.3 and 2.6 times higher than that of pristine Fe-BDC, which was attributed to enlarged specific surface area and pore volume and the decreased surface charges induced by Ni doping. The adsorption kinetics demonstrated that chemisorption was dominant and intra-particle diffusion was the rate-controlling step. Two-stage degradation including slow induction stage and rapid oxidation stage fitted with pseudo-zero-order kinetics well. The increased rate constants (2.472 vs. 1.188 min^-1 for MB; 0.616 vs. 0.421 min^-1 for MO) in the induction stage as well as the superior removal capability by asynchronism relative to synchronism jointly corroborating the improved adsorption performance was favor for subsequent degradation. Notably, this heterogeneous system not only exhibited obvious advantages like wider pH working range (3-9), better stability and reusability of catalysts, but also achieved the dual objectives of in-situ decontamination and adsorbent regeneration. The coupling of adsorption and degradation along with synergism between photocatalysis and Fenton-like process are responsible for the reinforced removal of organic contaminants.

Identifying Iron-Bearing Nanoparticle Precursor for Thermal Transformation into the Highly Active Hematite Photo-Fenton Catalyst

The hematite photo-Fenton catalysis has attracted increasing attention because it offers strong oxidation of organic pollutants under visible light at neutral pH. In the present work, aqueous synthesis of hematite photo-Fenton catalysts with high activity is demonstrated. We compare photo-Fenton activity for hematite obtained by hydrolyzation at 60 °C or by a thermally induced transformation from iron-bearing nanoparticles, such as amorphous iron oxyhydroxide or goethite. A link between their structure and visible light photo-Fenton reactivity is established. The highest activity was observed for hematite obtained from goethite nanowires due to oblong platelet-like structure, high surface area and the presence of nanopores.

Facile Synthesis of Co3O4 Nanoparticle-Functionalized Mesoporous SiO2 for Catalytic Degradation of Methylene Blue from Aqueous Solutions

In this study, a series of Co3O4 nanoparticle-functionalized mesoporous SiO2 (Co–SiO2) were successfully synthesized via a spontaneous infiltration route. Co species were firstly infiltrated into the confined spaces between the surfactant and silica walls, with the assistance of grinding CoCl3·6H2O and the as-prepared mesoporous SiO2. Then, Co3O4 nanoparticles (NPs) were formed and grown in the limited space of the mesopores, after calcination. Structures, morphologies, and compositions of the materials were characterized by X-ray diffraction, transmission electron microscopy, energy dispersion spectrum, N2 adsorption, and Fourier transform infrared spectra. Results showed that the high content of Co (rCo:Si = 0.17) can be efficiently dispersed into the mesoporous SiO2 as forms of Co3O4 NPs, and the structural ordering of the mesoporous SiO2 was well-preserved at the same time. The Co3O4 NP functionalized mesoporous SiO2 materials were used as Fenton-like catalysts for removing methylene blue (MB) from aqueous solutions. The catalyst prepared at rCo:Si = 0.17 could completely remove the high-concentration of MB (120 mg·L−1), and also showed an excellent performance with a removal capacity of 138 mg·g−1 to 180 mg·L−1 of MB. Catalytic mechanisms were further revealed, based on the degradation results.