Nickel doping of ferrous disulfide nanocubes exhibits enhanced oxidase-like activity for In vitro detection of total antioxidant capacity

The development of nanomaterials that mimic oxidase-like activities has recently attracted an increasing amount of attention. Obtaining highly active and cost-effective oxidase mimics has posed a significant challenge in this area of research. In this study, we successfully synthesized nickel-doped ferrous disulfide nanocubes (Ni-FeS2) via a facile one-step method. Characterization by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that Ni was predominantly distributed within the surface layer of the Ni-FeS2 nanocubes. The incorporation of nickel in density functional theory (DFT) calculations effectively reduced the d-band center of Fe, resulting in weakened adsorption to intermediates and thereby enhancing its catalytic efficiency. Moreover, we developed a novel approach based on Ni-FeS2 (the Ni-FeS2 method) for detecting reducing substances, which exhibited good sensitivity toward ascorbic acid (AA), glutathione (GSH), and cysteine (Cys). Remarkably, the established Ni-FeS2 method was successfully employed for in vitro assessment of total antioxidant capacity (TAC) in cellular and organ samples, thereby enabling discrimination between normal, senescent, and malignant cells as well as distinguishing among healthy liver tissue, cancerous liver tissue, and metastatic organs.

Ni(II)-doped CuWO4 photoanodes with enhanced photoelectrocatalytic activity

CuWO4 has emerged in the last years as a ternary metal oxide material for photoanodes application in photoelectrochemical cells, thanks to its relatively narrow band gap, high stability and selectivity toward the oxygen evolution reaction, though largely limited by its poor charge separation efficiency. Aiming at overcoming this limitation, we investigate here the effects that Cu(II) ion substitution has on the photoelectrocatalytic (PEC) performance of copper tungstate. Optically transparent CuWO4 thin-film photoanodes, prepared via spin coating and containing different amounts of Ni(II) ions, were fully characterized via UV-Vis spectroscopy, XRD and SEM analyses, and their PEC performance was tested via linear sweep voltammetry, incident photon to current efficiency and internal quantum efficiency analyses. From tests performed in the presence of a hole scavenger-containing electrolyte, the charge injection and separation efficiencies of the electrodes were also calculated. Pure-phase crystalline and/or heterojunction materials were obtained with higher PEC performance compared to pure CuWO4, mainly due to a significantly enhanced charge separation efficiency in the bulk of the material.

Rice husk valorization into sustainable Ni@TiO2/biochar nanocomposite for highly selective Pb (II) ions removal from an aqueous media

Herein, we successfully prepared sustainable nanocomposites from agriculture waste (rice husk)-derived biochar precursor, and followed by nickel-doped, base-treated titanium dioxide nanomaterials loading for efficient lead (Pb²⁺) removal from aqueous media. By varying the loading contents of active materials, the optimized sample (Ni_0.01@Na-TiO₂/BC) possessed an efficient Pb²⁺ adsorption capability of 122.3 mg g^-1 under the under optimum adsorption parameters, which is attributable to its specific surface area (138.09 m² g^-1) and excess functional sites. Kinetic and Isothermal examination illustrated that Pb²⁺ adsorption phenomena was well followed through pseudo 2nd order and Langmuir models. In addition, superior Pb²⁺ ions adsorption selectivity was recorded by optimized sample in a multi-metallic system over other existing ion (such as Cd²⁺, Mg²⁺, Ca²⁺, Cu²⁺, and Zn²⁺). Desorption experiments has been performed by using desorbing agent that demonstrates the good regeneration ability of sample. Hence, these findings provide new insight for the biowaste management by converting them into innovative adsorbents for commercial scale environmental remediation.

g-C3N4-wrapped nickel doped zinc oxide/carbon core-double shell microspheres for high-performance photocatalytic hydrogen production

The development of efficient heterojunctions with enhanced photocatalytic properties is considered a promising approach for photocatalytic hydrogen production. In this study, graphitic carbon nitride (g-C₃N₄)-wrapped nickel-doped zinc oxide/carbon (Ni-ZnO@C/g-C₃N₄) core-double shell heterojunctions with unique core-double shell structures were employed as efficient photocatalysts through an innovative approach. Ni doping can enhance the intensity and range of visible light absorption in ZnO, and the carbon core coupled with the hollow double-shell structure can accelerate the charge transfer rate and improve the photon utilization efficiency. Meanwhile, the construction of the Z-scheme heterojunction extended the electron-hole pair transport path. In addition, the Z-scheme charge-transfer mechanism of Ni-ZnO@C/g-C₃N₄ under simulated sunlight was verified by photoluminescence (PL) and electron spin resonance (ESR) experiments. As a result, the obtained photocatalyst acquired a high hydrogen evolution rate of 336.08 μmol g^-1h^-1, which is 36.49 times higher than that of pristine ZnO. Overall, this work may provide a pathway for the construction of highly efficient photocatalysts with unique core-double shell structures.

Iron-nickel bimetallic metal-organic frameworks as bifunctional Fenton-like catalysts for enhanced adsorption and degradation of organic contaminants under visible light: Kinetics and mechanistic studies

Iron-nickel bimetallic organic frameworks (FeNi_X-BDC, H₂BDC: terephthalic acid) were developed as bifunctional materials for adsorption and photo-Fenton degradation of organic dyes with different charge properties. Significantly enhanced adsorption capacity of FeNi_1/15-BDC towards methylene blue (MB) and methyl orange (MO) was achieved, 5.3 and 2.6 times higher than that of pristine Fe-BDC, which was attributed to enlarged specific surface area and pore volume and the decreased surface charges induced by Ni doping. The adsorption kinetics demonstrated that chemisorption was dominant and intra-particle diffusion was the rate-controlling step. Two-stage degradation including slow induction stage and rapid oxidation stage fitted with pseudo-zero-order kinetics well. The increased rate constants (2.472 vs. 1.188 min^-1 for MB; 0.616 vs. 0.421 min^-1 for MO) in the induction stage as well as the superior removal capability by asynchronism relative to synchronism jointly corroborating the improved adsorption performance was favor for subsequent degradation. Notably, this heterogeneous system not only exhibited obvious advantages like wider pH working range (3-9), better stability and reusability of catalysts, but also achieved the dual objectives of in-situ decontamination and adsorbent regeneration. The coupling of adsorption and degradation along with synergism between photocatalysis and Fenton-like process are responsible for the reinforced removal of organic contaminants.

Facile one-pot sonochemical synthesis of Ni doped bismuth sulphide for the electrochemical determination of promethazine hydrochloride

The present work reports the facile and cost-effective synthesis of rod like structured nickel doped bismuth sulphide (Ni-Bi₂S₃) via the ultrasonication process. The sonochemical synthesis technique is rapid, simple, non-explosive, and harmless than other conventional synthesis technique. After the synthesis, the resultant material was characterized through the various spectrophotometric techniques including FESEM, EDX, XRD, XPS and EIS. After the structural evaluation, as-synthesized Ni-Bi₂S₃ was applied for the electrocatalytic detection of promethazine hydrochloride (PMTZ) using CV and amperometry (i-t) techniques. Captivatingly, excellent electrocatalytic performance with the wider linear range from 1 nM to 163.17 µM was obtained for the electrochemical determination of PMTZ. The limit of detection (LOD) and sensitivity calculated around 0.4 nM and 2.904 μA µM^-1 cm^-2, respectively. Besides, an excellent selectivity, satisfactory reproducibility and good stability of the Ni-Bi₂S₃ modified electrode were checked towards the electrochemical determination of PMTZ. Furthermore, the real time application of PMTZ sensor was established in human serum and urine samples.