Indirect Z-Scheme Assembly of 2D ZnV2O6/RGO/g-C3N4 Nanosheets with RGO/pCN as Solid-State Electron Mediators toward Visible-Light-Enhanced CO2 Reduction

Green synthesis of cyclic carbonates: ZnV2O6@Bi2WO6 nanocomposite photocatalyst for efficient CO2 epoxidation

The present levels of CO2 emission in the atmosphere require the development of technologies to achieve carbon neutrality using inexpensive processes. Conversion of CO2 into cyclic carbonates is one of the solutions to this problem. Here, we synthesized a ZnV2O6/Bi2WO6 nanocomposite and catalyzed the cycloaddition of CO2 to epoxides for the green synthesis of cyclic carbonates under visible light irradiation. The present nanocomposite photocatalyst exhibited up to 96 % yield of cyclic carbonates. The photocatalyst was found to be efficient for photocatalytic cycloaddition reactions, and the recovered photocatalyst showed stability in up to five consecutive photocatalytic experiments. The current methodology of cyclic carbonate production is a significant step toward the mitigation of atmospheric CO2 and can work well with the development of nanocomposite photocatalysts.

Research progress on photocatalytic reduction of CO2 based on ferroelectric materials

Transforming CO2 into renewable fuels or valuable carbon compounds could be a practical means to tackle the issues of global warming and energy crisis. Photocatalytic CO2 reduction is more energy-efficient and environmentally friendly, and offers a broader range of potential applications than other CO2 conversion techniques. Ferroelectric materials, which belong to a class of materials with switchable polarization, are attractive candidates as catalysts due to their distinctive and substantial impact on surface physical and chemical characteristics. This review provides a concise overview of the fundamental principles underlying photocatalysis and the mechanism involved in CO2 reduction. Additionally, the composition and properties of ferroelectric materials are introduced. This review expands on the research progress in using ferroelectric materials for photocatalytic reduction of CO2 from three perspectives: directly as a catalyst, by modification, and construction of heterojunctions. Finally, the future potential of ferroelectric materials for photocatalytic CO2 reduction is presented. This review may be a valuable guide for creating reasonable and more effective photocatalysts based on ferroelectric materials.

Engineering the Electronic Structure towards Visible Lights Photocatalysis of CaTiO3 Perovskites by Cation (La/Ce)-Anion (N/S) Co-Doping: A First-Principles Study

Cation-anion co-doping has proven to be an effective method of improving the photocatalytic performances of CaTiO3 perovskites. In this regard, (La/Ce-N/S) co-doped CaTiO3 models were investigated for the first time using first-principles calculations based on a supercell of 2 × 2 × 2 with La/Ce concentrations of 0.125, 0.25, and 0.375. The energy band structure, density of states, charge differential density, electron-hole effective masses, optical properties, and the water redox potential were calculated for various models. According to our results, (La-S)-doped CaTiO3 with a doping ratio of 0.25 (LCOS1-0.25) has superior photocatalytic hydrolysis properties due to the synergistic performances of its narrow band gap, fast carrier mobility, and superb ability to absorb visible light. Apart from the reduction of the band gap, the introduction of intermediate energy levels by La and Ce within the band gap also facilitates the transition of excited electrons from valence to the conduction band. Our calculations and findings provide theoretical insights and solid predictions for discovering CaTiO3 perovskites with excellent photocatalysis performances.

Plasmonic Nanodomains Decorated on Two-Dimensional Oxide Semiconductors for Photonic-Assisted CO2 Conversion

Plasmonic nanostructures ensure the reception and harvesting of visible lights for novel photonic applications. In this area, plasmonic crystalline nanodomains decorated on the surface of two-dimensional (2D) semiconductor materials represent a new class of hybrid nanostructures. These plasmonic nanodomains activate supplementary mechanisms at material heterointerfaces, enabling the transfer of photogenerated charge carriers from plasmonic antennae into adjacent 2D semiconductors and therefore activate a wide range of visible-light assisted applications. Here, the controlled growth of crystalline plasmonic nanodomains on 2D Ga₂O₃ nanosheets was achieved by sonochemical-assisted synthesis. In this technique, Ag and Se nanodomains grew on 2D surface oxide films of gallium-based alloy. The multiple contribution of plasmonic nanodomains enabled the visible-light-assisted hot-electron generation at 2D plasmonic hybrid interfaces, and therefore considerably altered the photonic properties of the 2D Ga₂O₃ nanosheets. Specifically, the multiple contribution of semiconductor-plasmonic hybrid 2D heterointerfaces enabled efficient CO₂ conversion through combined photocatalysis and triboelectric-activated catalysis. The solar-powered acoustic-activated conversion approach of the present study enabled us to achieve the CO₂ conversion efficiency of more than 94% in the reaction chambers containing 2D Ga₂O₃-Ag nanosheets.

De novo synthesis of photocatalytic bifunctional MIL-125(Ti)/gC3N4/RGO through sequential self-assembly and solvothermal route

In this study we have synthesized a heterostructured metal organic framework (MOF) consisting of self-assembled porous carbon nitride (gC₃N₄) and, reduced graphene oxide (RGO) with MIL-125(Ti) (CN-GO-MIL) through a simple synthesis route. As-synthesized CN-GO-MIL was characterized to determine its morphological, surface, structural, and optical properties. The synthesis produced a porous nanomaterial with efficient visible light capture and electron transport. CN-GO-MIL proved 2.23 and 1.23 times as effective as bare MIL-125(Ti) for Rhodamine B (RhB) degradation and chromium (Cr) reduction, respectively. We propose a governing photocatalytic degradation and reduction mechanism in which superoxide plays a major role in the photocatalytic degradation, followed by O₂¹, OH·, and holes, and identify methanol as a suitable hole scavenger for reduction of Cr. Moreover, Cr reduction can be best achieved at pH 2 in the presence of methanol. Performance of material in terms of apparent quantum yield (AQY), figure of merit (FOM), and catalyst surface efficiency (S.E), suggests 5% CN-GO-MIL is an efficient photocatalyst for degradation of RhB. Comparison of the AQY with previously reported MOF-based composites shows that the as synthesized 5% CN-GO-MIL can be regarded as one of best performing photocatalyst under visible light irradiation for abatement of organic and inorganic pollution.

Effect of nonmetals (B, O, P, and S) doped with porous g-C3N4 for improved electron transfer towards photocatalytic CO2 reduction with water into CH4

Photocatalytic conversion of carbon dioxide (CO₂) into gaseous hydrocarbon fuels is an auspicious way to produce renewable fuels in addition to greenhouse gas emission mitigation. In this work, non-metals (B, O, P, and S) doped graphitic carbon nitride (g-C₃N₄) was prepared via solid-state polycondensation of urea for photocatalytic CO₂ reduction into highly needed methane (CH₄) with water under UV light irradiation. The various physicochemical characterization results reveal the successful incorporation of B, O, P, and S elements in the g-C₃N₄ matrix. The maximum CH₄ yield of 55.10 nmol/(mL_H2O.g_cat) over S-doped g-C₃N₄ has been obtained for CO₂ reduction after 7 h of irradiation. This amount of CH₄ production was 1.9, 1.4, 1.7, and 2.4-folds higher than B, O, P and bare g-C₃N₄ samples. The doping of S did not enlarge the surface area and photon absorption ability of the g-C₃N₄ sample, but this significant improvement was evidently due to effective charge separation and migration. The observed results imply that the doping of non-metal elements provides improved charge separation and is an effective way to boost photocatalyst performance. This work offers an auspicious approach to design non-metal doped g-C₃N₄ photocatalysts for renewable fuel production and would be promising for other energy application.

Rational Confinement of Yttrium Vanadate within Three-Dimensional Graphene Aerogel: Electrochemical Analysis of Monoamine Neurotransmitter (Dopamine)

Real-time monitoring of neurotransmitter levels is of tremendous technological demand, which requires more sensitive and selective sensors over a dynamic concentration range. As a use case, we report yttrium vanadate within three-dimensional graphene aerogel (YVO/GA) as a novel electrocatalyst for detecting dopamine (DA). This synergy effect endows YVO/GA nanocomposite with good electrochemical behaviors for DA detection compared to other electrodes. Benefiting from tailorable properties, it provides a large specific surface area, rapid electron transfer, more active sites, good catalytic activity, synergic effect, and high conductivity. The essential analytical parameters were estimated from the calibration plot, such as a limit of detection (1.5 nM) and sensitivity (7.1 μA μM^-1 cm^-2) with the YVO/GA sensor probe electrochemical approach. The calibration curve was fitted with the correlation coefficient of 0.994 in the DA concentration range from 0.009 to 83 μM, which is denoted as the linear working range. We further demonstrate the proposed YVO/GA sensor's applicability to detect DA in human serum sample with an acceptable recovery range. Our results imply that the developed sensor could be applied to the early analysis of dementia, psychiatric, and neurodegenerative disorders.

A Mini Review of the Preparation and Photocatalytic Properties of Two-Dimensional Materials

The successful preparation and application of graphene shows that it is feasible for the materials with a thickness of a single atom or few atomic layers to exist stably in nature. These materials can exhibit unusual physical and chemical properties due to their special dimension effects. At present, researchers have made great achievements in the preparation, characterization, modification, and theoretical research of 2D materials. Because the structure of 2D materials is often similar, it has a certain degree of qualitative versatility. Besides, 2D materials often carry good catalytic performance on account of their more active sites and adjustable harmonic electronic structure. In this review, taking 2D materials as examples [graphene, boron nitride (h-BN), transition metal sulfide and so on], we review the crystal structure and preparation methods of these materials in recent years, focus on their photocatalyst properties (carbon dioxide reduction and hydrogen production), and discuss their applications and development prospects in the future.

Co3O4/Bi4O5I2/Bi5O7I C-Scheme Heterojunction for Degradation of Organic Pollutants by Light-Emitting Diode Irradiation

Remediation of organic pollutant matrixes from wastewater by photodegradation using different heterojunctions is extensively studied to improve performance for potential application. Brilliant black (BB) and p-nitrophenol (PNP) have been detected in the environment and implicated as directly or indirectly carcinogenic to human health. This work analyzes their elimination from aqueous solutions under visible-light irradiation with composites of cobalt(II, III) oxide and bismuth oxyiodides (Co₃O₄/Bi₄O₅I₂/Bi₅O₇I). The synthesized nanomaterial properties were investigated using various techniques such as BET, SEM/EDS, TEM, XRD, FTIR, PL, and UV-vis. All the nanocomposites absorbed in the visible range of the solar spectrum with band gaps between 1.68 and 2.79 eV, and the specific surface area of the CB2 composite increased by 35.8% from that of Bi₄O₅I₂/Bi₅O₇I. There was an observed massive reduction in the rate of electron and hole recombination, and the band gaps of the composites decreased. The mineralization of PNP and BB was followed by determination of the total organic carbon with reductions of 93.6 and 83.7%, respectively. The main active species were the hydroxyl radicals, while the superoxide anion radical and generated holes were minor as confirmed by radical trapping experiments. The optimum pHs for degradation of PNP and BB were 9.6 and 5.3, respectively. The enhanced performance of the catalyst was due to C-scheme heterojunction formation that reduced the electron and hole recombination rate and was attributed to strong adsorption of the pollutants on the photocatalyst active surface. The nanocomposite is apposite for solar energy-driven remediation of organic pollutants from environmental aqueous samples.

Tale of Two Layered Semiconductor Catalysts toward Artificial Photosynthesis

The ever-increasing reliance on nonrenewable fossil fuels due to massive urbanization and industrialization created problems such as depletion of the primary feedstock and raised the atmospheric CO₂ levels causing global warming. A smart and promising approach is artificial photosynthesis that photocatalytically valorizes CO₂ into high-value chemicals. The inexpensive layered semiconductors like g-C₃N₄ and rGO or GO have the potential to make the process practically feasible for real applications. The suitable band positions with respect to the reduction potentials coupled with the typical surface properties of these layered semiconductors play a beneficial role in photoreduction of CO₂. Additionally, the creation of heterojunction interfaces to achieve the Z-scheme by anchoring g-C₃N₄ and rGO with another semiconductor with proper band alignment and dispersing plasmonic nano metals to obtain Schottky barriers on the layered surfaces also help retarding the electron-hole recombination and boost up the catalytic efficacy. Extensive exploration happened in recent years toward artificial photosynthesis over these materials, which needs a critical compendium. Surprisingly, in spite of the recent explosion of studies on photocatalytic reduction of CO₂ over metal-free semiconductors, there is not a single review on comparing the mechanistic aspects of photoreduction of CO₂ over the layered semiconductors g-C₃N₄ and rGO. This review stands out as a unique documentation, where the mechanism of photocatalytic reduction of CO₂ over this set of materials is critically examined in the context of band and surface modifications. An overall conclusion and outlook at the end indicates the need to develop prototypes for artificial photosynthesis with these well-studied semiconducting layered materials to yield solar fuels.

Nanostructured Carbon Nitrides for CO2 Capture and Conversion

Carbon nitride (CN), a 2D material composed of only carbon (C) and nitrogen (N), which are linked by strong covalent bonds, has been used as a metal-devoid and visible-light-active photocatalyst owing to its magnificent optoelectronic and physicochemical properties including suitable bandgap, adjustable energy-band positions, tailor-made surface functionalities, low cost, metal-free nature, and high thermal, chemical, and mechanical stabilities. CN-based materials possess a lot of advantages over conventional metal-based inorganic photocatalysts including ease of synthesis and processing, versatile functionalization or doping, flexibility for surface engineering, low cost, sustainability, and recyclability without any leaching of toxic metals from photocorrosion. Carbon nitrides and their hybrid materials have emerged as attractive candidates for CO₂ capture and its reduction into clean and green low-carbon fuels and valuable chemical feedstock by using sustainable and intermittent renewable energy sources of sunlight and electricity through the heterogeneous photo(electro)catalysis. Here, the latest research results in this field are summarized, including implementation of novel functionalized nanostructured CNs and their hybrid heterostructures in meeting the stringent requirements to raise the efficiency of the CO₂ reduction process by using state-of-the-art photocatalysis, electrocatalysis, photoelectrocatalysis, and feedstock reactions. The research in this field is primarily focused on advancement in the synthesis of nanostructured and functionalized CN-based hybrid heterostructured materials. More importantly, the recent past has seen a surge in studies focusing significantly on exploring the mechanism of their application perspectives, which include the behavior of the materials for the absorption of light, charge separation, and pathways for the transport of CO₂ during the reduction process.