Highly Sensitive and Selective Toluene Sensor of Bimetallic Ni/Fe-MOFs Derived Porous NiFe2O4 Nanorods

Development of a novel ternary MOF nanozyme-based smartphone-integrated colorimetric and microfluidic paper-based analytical device for trace glyphosate detection

Given the significant and potential fatal implications of glyphosate (GLY) residues on human health and the integrity of ecosystems, their presence has garnered substantial global concern and scrutiny. Herein, we introduced a pioneering colorimetric sensing platform, the first of its kind, based on ternary metal-organic frameworks (ZnCo-ZIFs@MIL-101(Fe)). This innovative platform enabled ultra-sensitive, affordable, portable and rapid on-site detection of GLY. This platform achieved a wider linear range for GLY of 0.02-40 μg/mL with an exhibiting remarkable detection limit of 1 ng/mL, which was attributed to the electronic hybridization of the Fe3+, Co2+, and Zn2+ metal centers of ZnCo-ZIFs@MIL-101(Fe), significantly enhancing the composite's catalytic performance. The assay was successfully employed to detect GLY in food and herb samples. Moreover, to meet the demand of in-field detection for GLY, a smartphone detection method based on ZnCo-ZIFs@MIL-101(Fe) with visual, intelligent, and portable features was fabricated. This detection concentration range of GLY was 0-1 μg/mL, and the limit of smartphone detection was 23 ng/mL. Furthermore, this sensor seamlessly integrated with smartphones and paper-based microfluidic chips (μPADs), which constructed a portable test strips-smartphone sensing platform for facilitating real-time and on-site visual quantitative detection of GLY. The detection concentration range was 0-1 μg/mL, and the limit was calculated as low as 75 ng/mL. The assay was highly adaptable in practical applications. In summary, our study paved a novel pathway for the design and utilization of multi-metal MOF nanozymes in on-site pesticide monitoring.

Hierarchically porous ZnO derived from zeolitic imidazolate frameworks for high-sensitive MEMS NO2 sensor

Three-dimensional (3D) porous metal oxide nanomaterials with controllable morphology and well-defined pore size have attracted extensive attention in the field of gas sensing. Herein, hierarchically porous ZnO-450 was obtained simply by annealing Zeolitic Imidazolate Frameworks (ZIF-90) microcrystals at an optimal temperature of 450 °C, and the effect of annealing temperature on the formation of porous nanostructure was discussed. Then the as-obtained ZnO-450 was employed as sensing materials to construct a Micro-Electro-Mechanical System (MEMS) gas sensor for detecting NO2. The MEMS sensor based on ZnO-450 displays the excellent gas-sensing performances at a lower working temperature (190 °C), such as high response value (242.18% @ 10 ppm), fast response/recovery time (9/26 s) and ultralow limit of detection (35 ppb). The ZnO-450 sensor shows better sensing performance for NO2 detection than ZnO-based composites materials or commercial ZnO nanoparticles (NPs), which are attributed to its unique hierarchically structures with high porosity and larger surface area. This ZIFs driven strategy can be expected to pave a new pathway for the design of high-performance NO2 sensors.

Facile synthesis of NiFe2O4-based nanoblocks for low-temperature detection of trace n-butanol

Fe2O3-loaded NiFe2O4 nanoblocks were successfully developed under a straightforward one-step hydrothermal synthesis method, aiming to detect trace amounts of n-butanol at the parts per billion (ppb) concentration range. The synthesized samples were comprehensively characterized using various techniques, including XRD, SEM, XPS, TEM and SAED. At a tantalizingly low temperature of 130 °C, the Ni/Fe-2 gas sensor demonstrated the optimum response (Ra/Rg = 29.747 @ 10 ppm) to n-butanol. Furthermore, Ni/Fe-2 sensor exhibited remarkable stability and reproducibility and an ultra-low detection limit. The enhanced gas sensitivity was primarily due to the assembly of Ni/Fe-2 nanoblocks from differently sized nanospheres, which exhibited a rich surface porosity conducive to gas adsorption. Besides, the formation of heterojunctions and the augmentation of oxygen vacancy content are also conducive to enhancing gas sensing capabilities. The Ni/Fe-2 sensor is expected to successfully detect trace amounts of n-butanol.

Recent Progress in Spinel Ferrite (MFe2O4) Chemiresistive Based Gas Sensors

Gas-sensing technology has gained significant attention in recent years due to the increasing concern for environmental safety and human health caused by reactive gases. In particular, spinel ferrite (MFe2O4), a metal oxide semiconductor with a spinel structure, has emerged as a promising material for gas-sensing applications. This review article aims to provide an overview of the latest developments in spinel-ferrite-based gas sensors. It begins by discussing the gas-sensing mechanism of spinel ferrite sensors, which involves the interaction between the target gas molecules and the surface of the sensor material. The unique properties of spinel ferrite, such as its high surface area, tunable bandgap, and excellent stability, contribute to its gas-sensing capabilities. The article then delves into recent advancements in gas sensors based on spinel ferrite, focusing on various aspects such as microstructures, element doping, and heterostructure materials. The microstructure of spinel ferrite can be tailored to enhance the gas-sensing performance by controlling factors such as the grain size, porosity, and surface area. Element doping, such as incorporating transition metal ions, can further enhance the gas-sensing properties by modifying the electronic structure and surface chemistry of the sensor material. Additionally, the integration of spinel ferrite with other semiconductors in heterostructure configurations has shown potential for improving the selectivity and overall sensing performance. Furthermore, the article suggests that the combination of spinel ferrite and semiconductors can enhance the selectivity, stability, and sensing performance of gas sensors at room or low temperatures. This is particularly important for practical applications where real-time and accurate gas detection is crucial. In conclusion, this review highlights the potential of spinel-ferrite-based gas sensors and provides insights into the latest advancements in this field. The combination of spinel ferrite with other materials and the optimization of sensor parameters offer opportunities for the development of highly efficient and reliable gas-sensing devices for early detection and warning systems.

Generation of Oxygen Vacancies in Metal-Organic Framework-Derived One-Dimensional Ni0.4Fe2.6O4 Nanorice Heterojunctions for ppb-Level Diethylamine Gas Sensing

Metal-organic frameworks (MOFs) are ideal sensing materials due to their distinctive morphologies, high surface area, and simple calcination to remove sacrificial MOF scaffolds. Oxygen vacancies (O_vs) can be efficiently generated by the thermal annealing of metal oxides in an inert atmosphere. Herein, MIL-53-based Fe and Fe/Ni-MOFs nanorices (NRs) were first prepared by using a solvothermal method, and then one-dimensional (1D) Fe₂O₃ and Ni_0.4Fe_2.6O₄ NRs were derived from the MOFs after calcination at 350 °C in an air and argon (Ar) atmosphere, respectively. It was found that Ar-annealed Ni_0.4Fe_2.6O₄ NRs have higher O_vs concentrations (82.11%) and smaller NRs (24.3 nm) than air-annealed NRs (65.68% & 31.5 nm). Beneficially, among the synthesized NRs, the Ar-Ni_0.4Fe_2.6O₄ NRs show a higher sensitivity to diethylamine (DEA) (R_a/R_g = 23 @ 5 ppm, 175 °C), low detection limit (R_a/R_g = 1.2 @ 200 ppb), wide dynamic response (R_a/R_g = 93.5@ 30 ppm), high stability (30 days), and faster response/recovery time (4 s/38 s). Moreover, the 1D nanostructure containing heterostructures offers excellent sensing selectivity and a wide detection range from 200 ppb to 30 ppm in the presence of DEA. The outstanding gas sensing behavior can be attributable to synergistic impact, structural advantages, high concentration of O_vs, and the heterojunction interface, which can have profound effects on gas sensor performance. This study provides a unique technique for constructing high-performance gas sensors for ppb-level DEA detection and the formation of O_vs in metal oxides without the need for any additives.

A novel core@double-shell three-layer structure with dendritic fibrous morphology based on Fe3O4@TEA@Ni-organic framework: a highly efficient magnetic catalyst in the microwave-assisted Sonogashira coupling reaction

In synthetic organic chemistry, the formation of carbon-carbon bonds is a significant and substantial reaction. As a result, developing a highly active magnetic heterogeneous catalyst with excellent performance is a very appealing technique for constructing C-C bonds in organic chemistry. The present study describes the fabrication of a novel and readily recoverable nickel-based metal-organic framework (MOF) for C-C bond formation through the Sonogashira coupling reaction. The efficient magnetic core-shell structure (Fe₃O₄@TEA@MOF) with a 3D dendritic fibrous morphology was successfully synthesized using a hydrothermal approach by immobilizing Ni-based MOF onto the Fe₃O₄@TEA core-shell structure. The fabrication of Fe₃O₄@TEA@MOF was confirmed by various analyses; Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray analysis (EDS), and elemental mapping confirmed the stepwise fabrication of catalyst. X-ray diffraction analysis (XRD) showed the crystalline nature of the catalyst. Field-emission scanning electron microscopy (FE-SEM) displayed the 3D dendritic fibrous morphology. Thermogravimetric analysis (TGA) and vibrating sample magnetometer analysis (VSM) showed the excellent thermal stability and magnetic properties of Fe₃O₄@TEA@MOF. The Brunauer-Emmett-Teller analysis (BET) found that the fabricated catalyst with a surface area of 36.2 m² g^-1, pore volume of 0.18 cm³ g^-1, and mean pore diameter of 20.38 nm belongs to mesoporous structures. In addition, the information from the inductively coupled plasma-optical emission spectroscopy (ICP-OES) about fresh and reused catalysts showed that the metal leaching amount is slight and about 1.98%. Other advantages of the Fe₃O₄@TEA@MOF catalyst can be mentioned as easily reusable for four runs and high performance (above 98%) in synthesizing diphenylacetylene from phenylacetylene, aryl halide, and cesium carbonate (as the base) under solvent-free and microwave conditions.

The Effect of Heat Treatment on the Microstructure and Mechanical Properties of 2D Nanostructured Au/NiFe System

Nanostructured NiFe film was obtained on silicon with a thin gold sublayer via pulsed electrodeposition and annealed at a temperature from 100 to 400 °C in order to study the effect of heat treatment on the surface microstructure and mechanical properties. High-resolution atomic force microscopy made it possible to trace stepwise evolving microstructure under the influence of heat treatment. It was found that NiFe film grains undergo coalescence twice—at ~100 and ~300 °C—in the process of a gradual increase in grain size. The mechanical properties of the Au/NiFe nanostructured system have been investigated by nanoindentation at two various indentation depths, 10 and 50 nm. The results showed the opposite effect of heat treatment on the mechanical properties in the near-surface layer and in the material volume. Surface homogenization in combination with oxidation activation leads to abnormal strengthening and hardening-up of the near-surface layer. At the same time, a nonlinear decrease in hardness and Young’s modulus with increasing temperature of heat treatment characterizes the internal volume of nanostructured NiFe. An explanation of this phenomenon was found in the complex effect of changing the ratio of grain volume/grain boundaries and increasing the concentration of thermally activated diffuse gold atoms from the sublayer to the NiFe film.

MOFs-Derived Porous NiFe2O4 Nano-Octahedrons with Hollow Interiors for an Excellent Toluene Gas Sensor

Toluene is extensively used in many industrial products, which needs to be effectively detected by sensitive gas sensors even at low-ppm-level concentrations. Here, NiFe2O4 nano-octahedrons were calcinated from NiFe-bimetallic metal-organic framework (MOFs) octahedrons synthesized by a facile refluxing method. The co-existence of p-Phthalic acid (PTA) and 3,3-diaminobenzidine (DAB) promotes the formation of smooth NiFe-bimetallic MOFs octahedrons. After subsequent thermal treatment, a big weight loss (about 85%) transformed NiFe2O4 nanoparticles (30 nm) into NiFe2O4 porous nano-octahedrons with hollow interiors. The NiFe2O4 nano-octahedron based sensor exhibited excellent gas sensing properties for toluene with a nice stability, fast response, and recovery time (25 s/40 s to 100 ppm toluene), and a lower detection limitation (1 ppm) at 260 °C. The excellent toluene-sensing properties can not only be derived from the hollow interiors combined with porous nano-octahedrons to favor the diffusion of gas molecules, but also from the efficient catalytic activity of NiFe2O4 nanoparticles.