2D Hybrid Architectures Constructed from Two Kinds of Polyoxovanadates as Efficient Heterogeneous Catalysts for Cyanosilylation and Knoevenagel Condensation

Highly Efficient Solvent-Free Cyanosilylation of Aldehydes Catalyzed by Bilayered Two-Dimensional Metal-Organic Frameworks

While metal-organic frameworks (MOFs) are promising for heterogeneous catalysis and mechanistic investigations due to their well-defined active sites, high porosity, large surface area, and structural tunability, two-dimensional (2D) MOFs exhibit superior catalytic efficiency over three-dimensional (3D) MOFs by offering higher specific surface areas and reduced diffusion limitations, thus enhancing active site exposure and substrate accessibility. In this work, two novel bilayered 2D MOFs, Mg3(TPHB)2(H2O)6·(DMF)12 (Mg-TPHB-MOF) and Mn3(TPHB)2(H2O)6·(DMF)16 (Mn-TPHB-MOF), were synthesized, and their efficacy as Lewis acid catalysts in the solvent-free cyanosilylation of aldehydes was investigated. Both MOFs exhibited remarkable catalytic activity, with Mg-TPHB-MOF achieving complete conversion of benzaldehyde within 10 min at room temperature. This catalytic performance surpasses that of many previously reported MOF catalysts for the same reaction, highlighting the potential of 2D MOFs in catalysts. To gain deeper insights into the catalytic mechanism and the superior performance of Mg-TPHB-MOF, computational studies were conducted to determine the free energy profiles of the reaction pathways with and without the catalyst. The results of these calculations corroborated the experimental findings, indicating a lower energy barrier for the Mg-TPHB-MOF-catalyzed reaction. Furthermore, both MOFs demonstrated good reusability over five catalytic cycles, maintaining high conversion rates and structural integrity.

A Multivariate 2D Metal-Organic Framework with Open Metal Sites for Catalytic CO2 Cycloaddition and Cyanosilylation Reactions

This work reports the synthesis of a dual functional 2D framework, {[Zn2(4-tpom)2(oxdz)2]·4H2O}n (1), at room temperature, where a bent dicarboxylate, oxdz2- (4,4'-(1,3,4-oxadiazole-2,5-diyl)dibenzoate), and a neutral flexible N-donor linker, 4-tpom (tetrakis(4-pyridyloxymethylene)methane), are utilized. Its single-crystal X-ray analysis indicated a 2-fold interpenetrated 2D framework having tetracoordinated Zn(II) centers and dangling pyridyl groups. Its further characterization was carried out with elemental microanalysis, FTIR spectroscopy, TG analysis, and powder X-ray diffraction. The tetracoordinated Zn(II) centers as active Lewis acidic sites and the N atoms of 4-tpom as Lewis basic sites in 1 are explored for its functioning as a heterogeneous catalyst in two important reactions, (i) cycloaddition of CO2 with various epoxides and (ii) cyanosilylation reaction under solvent-free conditions. We could successfully show the cycloaddition of styrene oxide with CO2 (99% conversion) under balloon pressure with low catalyst (0.2-0.3 mol %) and cocatalyst (0.5-0.75 mol %) loadings, which is otherwise difficult to achieve. It was observed that all the substrates (aromatic and aliphatic), irrespective of their sizes, showed conversion percentage >99%. In the cyanosilylation reaction, a conversion of 96% was obtained with 1.5 mol % of 1 at room temperature for 12 h. This framework emerged as an excellent recyclable catalyst for both the reactions.

A porous Anderson-type polyoxometalate-based metal-organic framework as a multifunctional platform for selective oxidative coupling with amines

Incorporating catalytic units into a crystalline porous matrix represents a facile way to build high-efficiency heterogeneous catalysts, and by rational design of the porous skeleton with appropriate building blocks the catalytic performance can be significantly enhanced for a series of organic transformations owing to the synergistic effect from the multicomponent and confined porous microenvironment around catalytically active sites. Herein, we demonstrate that the design and synthesis of a porous polyoxometalate-based metal-organic framework YL2(H2O)2[CrMo6O18(PET)2]·4H2O (POMOF-1) constructed from Anderson-type [CrMo6O18(PET)2] (PET = pentaerythritol), which can be employed as a multifunctional platform for synthesis of N-containing compounds via selective oxidative coupling with amines. POMOF-1 features microporous 1D channels defined by Y3+ and L, with [CrMo6O18(PET)2] arranged orderly between adjacent Lvia electrostatic interactions. Upon using POMOF-1 as a catalyst and H2O2 as an oxidant, a variety of amines could be effectively converted to value-added amides, imines and azobenzenes via the oxidative cross-coupling with alcohols or homo-coupling. In particular, POMOF-1 showed dramatically improved activity for the N-formylation reaction owing to the synergistic and confinement effect, with the yield of amides up to 95% and 4 times higher than that of homogeneous [CrMo6O18(PET)2]. Meanwhile, the oxidative homo-coupling of arylmethylamines and arylamines can be facilely tuned by adjustment of the amount of oxidant, solvent and additive, affording imines and azobenzenes in high selectivity and yield, respectively. POMOF-1 is robust and can be reused for 5 cycles with little loss of catalytic activity and structural integrity. The work demonstrates that the combination of catalytically active POMs with crystalline porous MOFs holds great potential to build robust and recyclable heterogeneous systems with enhanced activity and selectivity for multifunctional catalysis.

Recent advances in oxidative catalytic applications of polyoxovanadate-based inorganic-organic hybrids

Polyoxovanadates (POVs) have received widespread attention in catalytic applications due to their various structures and remarkable redox properties. By introducing a second transition metal, POV-based inorganic-organic hybrid (POVH) catalysts show increasing stability and more catalytic active sites compared with pure POVs. In this perspective article, POVH materials as oxidative catalysts have been classified into two main categories according to the interactions between transition metal-complex units and POV clusters: (i) hybrids with metal-organic units act as isolated cations and (ii) hybrids with an organic ligand coordinate to the second transition metal, which is further linked to a POV cluster via oxygen bridges directly or indirectly to give zero-, one-, two- or three-dimensional supramolecular structures. The oxidative conversion of organic compounds, including thiophene derivatives, thioethers, alkanes, alcohols, and alkenes, and oxidative detoxification of a sulfur mustard simulant or degradation of lignin, along with the oxidative photo/electrocatalytic transformation of organic compounds catalyzed by POVH materials, are discussed in detail. Furthermore, the challenges and prospects toward the development of POVH catalysts are explored briefly from our perspectives.

Construction of defected MOF-74 with preserved crystallinity for efficient catalytic cyanosilylation of benzaldehyde

Numerous open metal sites and well-developed micropores are the two most significant characteristics that should be imparted to design metal-organic frameworks (MOFs) as effective catalysts. However, the construction of the best MOF catalyst with both these characteristics is challenging because the creation of numerous open metal sites generally triggers some structural collapse of the MOF. Herein, we report the construction of well-structured but defected MOFs through the growth of defected MOFs, where some of the original organic linkers were replaced with analog organic linkers, on the surface of a crystalline MOF template (MOF-on-MOF growth). Additional open metal sites within the MOF-74 structure were generated by replacing some of the 2,5-dihydroxy-1,4-bezenedicarboxylic acid presenting in MOF-74 with 1,4-benzenedicarboxylic acid due to the missing hydroxyl groups. And the resulting additional open metal sites within the MOF-74 structure resulted in enhanced catalytic activity for the cyanosilylation of aldehydes. However, the collapse of some of the well-developed MOF-74 structure was also followed by structural defects. Whereas, the growth of defected MOF-74 (D-MOF-74) on the well-crystallized MOF-74 template led to the production of relatively well-crystallized D-MOF-74. Core-shell type MOF-74@D-MOF-74 having abundant open metal sites with a preserved crystallinity exhibited the efficient catalytic cyanosilylation of several aldehydes. Additionally, MOF-74@D-MOF-74 displayed excellent recyclability during the consecutive catalytic cycles.

Enhanced catalytic activity of MOF-74 via providing additional open metal sites for cyanosilylation of aldehydes

The preparation of metal-organic frameworks (MOFs) having many open metal sites is an excellent approach for the development of highly active MOF-based catalysts. Herein, well-defined rice-shaped MOF-74 microparticles having structural defects are prepared by incorporating two analogous organic linkers [2,5-dihydroxy-1,4-bezenedicarboxylic acid (DHBDC) and 2-hydroxy-1,4-benzenedicarboxylic acid (HBDC)] within the MOF-74 structure. The replacement of some of DHBDC in MOF-74 by HBDC causes the structural defects (excluding some of the bridged hydroxyl groups), and these structural defects provide the additional open metal sites within MOF-74. Finally, the additional open metal sites within MOF-74 result in the enhanced catalytic activity for the cyanosilylation of several aldehydes. A series of MOF-74s is prepared with various incorporated amounts of HBDC, and the optimum ratio between DHBDC and HBDC in MOF-74 to achieving the best catalytic performance is determined. In addition, the defected MOF-74 displays an excellent recyclability for the catalytic reaction.

MOF/POM hybrids as catalysts for organic transformations

Insertion of molecular metal oxides, e.g. polyoxometalates (POMs), into metal-organic frameworks (MOFs) opens up new research opportunities in various fields, particularly in catalysis. POM/MOF composites have strong acidity, oxygen-rich surface, and redox capacity due to typical characteristics of POMs and the large surface area, highly organized structures, tunable pore size, and shape are due to MOFs. Such hybrid materials have gained a lot of attention due to astonishing structural features, and hence have potential applications in organic catalysis, sorption and separation, proton conduction, magnetism, lithium-ion batteries, supercapacitors, electrochemistry, medicine, bio-fuel, and so on. The exceptional chemical and physical characteristics of POMOFs make them useful as catalysts in simple organic transformations with high capacity and selectivity. Here, the thorough catalytic study starts with a brief introduction related to POMs and MOFs, and is followed by the synthetic strategies and applications of these materials in several catalytic organic transformations. Furthermore, catalytic conversions like oxidation, condensation, esterification, and some other types of catalytic reactions including photocatalytic reactions are discussed in length with their plausible catalytic mechanisms. The disadvantages of the POMOFs and difficulties faced in the field have also been explored briefly from our perspectives.

Cobalt complexes tuned by Anderson-type polyoxometalates and bis-amide derivative ligands featuring a 'V'-like connector for efficient ampere sensing and the visible-light catalytic reduction of Cr(VI)

To exploit polyoxometalate (POM)-based metal-organic complexes (MOCs) with outstanding electro- and photo-chemical performances, two new bis-amide derivative N-donor ligands featuring a 'V'-like connector, 4,4'-bis(3-pyridinecarboxamide)phenylmethane (L¹) and 4,4'-bis(3-pyridinecarboxamide)phenylketone (L²), were designed and reacted with Anderson-type POMs in the presence of Co(II) ions under solvothermal conditions, which generated four MOCs: [Co₂(L¹)₂(AlMo₆H₅O₂₄)]·4H₂O (1), [Co₂(HL¹)₂(H₂O)₆(TeMo₆O₂₄)]·2H₂O (2), [Co₂(HL²)₂(H₂O)₄[AlMo₆H₆O₂₄]₂]·5H₂O (3), and [Co₂(HL²)₂(H₂O)₆(TeMo₆O₂₄)]·2H₂O (4). All the complexes showed supramolecular structures via hydrogen bond interaction, which resulted from the 2D layers for 1, the satellite-like structural units for 2 and 4, but the 1D chains for 3. In these structures, the POMs and organic ligands exhibited different coordination modes. Both 2 and 4 showed efficient ampere sensing activities for Cr(VI) with lower limits of detection of 0.029 and 0.038 μM, respectively. Complexes 1 and 2 showed good visible-light catalytic behavior toward the reduction of Cr(VI), which offers more chances for developing electrochemical sensors and photocatalysts for Cr(VI).

Versatile post-functionalisation strategy for the formation of modular organic-inorganic polyoxometalate hybrids

Hybrid structures incorporating different organic and inorganic constituents are emerging as a very promising class of materials since they synergistically combine the complementary and diverse properties of the individual components. Hybrid materials based on polyoxometalate clusters (POMs) are particularly interesting due to their versatile catalytic, redox, electronic, and magnetic properties, yet the controlled incorporation of different clusters into a hybrid structure is challenging and has been scarcely reported. Herein we propose a novel and general strategy for combining multiple types of metal-oxo clusters in a single hybrid molecule. Two novel hybrid POM structures (HPOMs) bis-functionalised with dipentaerythritol (R-POM1-R; R = (OCH2)3CCH2OCH2C(CH2OH)) were synthesised as building-blocks for the formation of heterometallic hybrid triads (POM2-R-POM1-R-POM2). Such a modular approach resulted in the formation of four novel heterometallic hybrids combing the Lindqvist {V6}, Anderson-Evans {XMo6} (X = Cr or Al) and trisubstituted Wells-Dawson {P2V3W15} POM structures. Their formation was confirmed by multinuclear Nuclear Magnetic Resonance (NMR), infrared (IR) and UV-Vis spectroscopy, as well as Mass Spectrometry, Diffusion Ordered Spectroscopy (DOSY) and elemental analysis. The thermal stability of the hybrids was also examined by Thermogravimetric Analysis (TGA), which showed that the HPOM triads exhibit higher thermal stability than comparable hybrid structures containing only one type of POM. The one-pot synthesis of these novel compounds was achieved in high yields in aqueous and organic media under simple reflux conditions, without the need of any additives, and could be translated to create other hybrid materials based on a variety of metal-oxo cluster building-blocks.

Three Si-substituted polyoxovanadates as efficient catalysts for Knoevenagel condensation and selective oxidation of styrene to benzaldehyde

Three new Si-substituted polyoxovanadates (POVs), [Cd₂(dien)₂][Cd(dien)][Cd(Hdien)₂][V₁₅Si₆O₄₆(OH)₂(H₂O)]·7H₂O (1), [Co(enMe)₂]₃[Co₂(enMe)₂(H₂O)₂][V₁₆Si₄O₄₄(OH)₂(H₂O)]·6H₂O (2), and [Co(teta)]₄[V₁₆Si₄O₄₂(OH)₄(H₂O)]·10H₂O (3) (dien = diethylenetriamine; enMe = 1,2-diaminopropane; teta = triethylenetetramine) were synthesized by the hydrothermal method and characterized. Structural analysis sheds light on the fact that the {V₁₅Si₆O₄₈}/{V₁₆Si₄O₄₆} clusters of compounds 1-3 were formed by replacing {VO₅} square pyramids in the classical {V₁₈O₄₂} cluster with {Si₂O₇} units. Compound 1 is a 2D bilayer structure formed by the [V₁₅Si₆O₄₆(OH)₂(H₂O)]^10- cluster and two types of bridging Cd complexes containing binuclear groups [Cd₂(dien)₂]⁴⁺. Compound 2 is a 3D framework constructed from the [V₁₆Si₄O₄₄(OH)₂(H₂O)]^10- cluster and two types of Co complex fragments including binuclear [Co₂(enMe)₂(H₂O)₂]⁴⁺. In compound 3, the [V₁₆Si₄O₄₂(OH)₄(H₂O)]^8- cluster is connected with bridging [Co(teta)]²⁺ to expand into a 2D network. Compounds 1 and 3 represent the first 2D assemblies based on a vanadosilicate cluster. 1-3 served as heterogeneous catalysts and exhibited highly efficient catalytic activities for the Knoevenagel condensation under mild ambient conditions with low catalyst loading, featuring the open Lewis base {V₁₅Si₆O₄₈}/{V₁₆Si₄O₄₆} sites and Lewis acid Cd²⁺/Co²⁺ sites. The conversion of benzaldehyde was up to 99.3% in 80 min at room temperature using 1 as a heterogeneous catalyst with only 0.37% catalyst loading. Moreover, compounds 1-3 as catalysts for selective oxidation of styrene to benzaldehyde exhibited excellent catalytic performance, high selectivity and could be readily recycled. Most strikingly, compound 1 showed excellent catalytic performance with 97.6% conversion of styrene and 100% selectivity of benzaldehyde in 15 min. In addition, the catalytic activity of catalyst 1 was well maintained after five cycling reactions.

Infinite building blocks for directed self-assembly of a supramolecular polyoxometalate–cyclodextrin framework for multifunctional oxidative catalysis

With evolution from polyoxometalate-based molecular building blocks to infinite building blocks (IBBs), a supramolecular polyoxometalate–cyclodextrin framework was constructed by an IBB strategy for multifunctional oxidative catalysis.

Multinuclear transition metal-containing polyoxometalates constructed from Nb/W mixed-addendum precursors: synthesis, structures and catalytic performance

Four new transition metal-containing Nb/W mixed-addendum POM trimers with the formula H19[M4(H2O)x(P2W15Nb3O62)3]·m(HCOOH)·nH2O (M = Cu, x = 15, m = 0, and n = 21, Cu-POM; M = Co, x = 7, m = 0, and n = 15, Co-POM; M = Mn, x = 7, m = 6, and n = 18, Mn-POM; and M = Zn, x = 7, m = 0, and n = 23, Zn-POM) have been synthesized by a solvothermal method in a water-ethanol mixed solvent. All the four compounds were characterized by single-crystal X-ray diffraction, powder X-ray diffraction (XRD), IR spectroscopy, thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). These compounds can serve as efficient heterogeneous catalysts for the cyanosilylation of different carbonyl compounds under ambient temperature and solvent-free conditions, and Cu-POM shows much better catalytic performance than the other three compounds. The cycle experiment showed that Cu-POM can be reused for at least five cycles without significant loss of catalytic activity. The IR spectroscopy and XRD analysis revealed that Cu-POM can retain its integrity after catalysis.

Organo-functionalized polyoxovanadates: crystal architecture and property aspects

Polyoxovanadates (POVs), as one of the most prominent members of polyoxometalates (POMs), have been subject to extensive studies by virtue of their aesthetically intriguing structures and potential applications in catalysis, magnetism, and optics, among others. In recent years, organo-functionalized POVs have received considerable attention due to the combination of the advantages of POVs with the importance of organic species. In this review, the key developments of polyoxovanadates and, particularly, the achievements that are related to polyoxovanadates modified with organic ligands and transition metal-organic ligand are summarized. Herein, we systematically introduce the structural features of organo-functionalized POVs and their main applications involved in the magnetism and catalysis aspects. Finally, the current challenges and future prospects in the design, synthesis, and property investigation of polyoxovanadates are also discussed.

The crystal structure of hexakis(2-(pyridin-2-ylamino)pyridin-1-ium) decavanadate(V) dihydrate, C60H64N18O30V10

C60H64N18O30V10, orthorhombic, Pbca (no. 61), a = 21.1781(19) Å, b = 14.4198(13) Å, c = 24.543(2) Å, V = 7495.2(12) Å3, Z = 4, R gt (F) = 0.0538, wR ref(F 2) = 0.1482, T = 298 K.

Polyoxometalate-based metal–organic frameworks for heterogeneous catalysis

POM-based MOFs simultaneously possessing the virtues of POMs and MOFs exhibit excellent heterogeneous catalytic properties.